ub bsstatic.hubbsmachine.com › category_sections › theodolite...p. 636.285.4388 f. 636.285.5970...
TRANSCRIPT
UBBSOPTICAL TARGETING SPECIALTIESF O R M E T R O L O G Y S U P P O R T S Y S T E M S
Hubbs Machine & Manufacturing, Inc. was started in 1984 to manufacture and distribute targeting and accessories for support of Computer-Aided Theodolite Systems. We now support several coordinate measuring systems: Theodolite, Photogrammetry, Laser Scanner, Laser Tracker, and other emerging coordinate measurement systems.
Hubbs Machine & Manufacturing, Inc. is the original and most trusted manufacturer of quality targeting, accessories, and tooling components. Our designs and part numbers are recognized as the industry standard.
The products shown in our catalog are examples of many variations which are possible in Standard Theodolite, Retro-Reflective Targeting, Laser Tracker Adaptors and Accessories. Many items are available in stainless steel as well as 1144 steel. We offer the largest and most diverse selection of targets and accessories in the market.
Even with the diversity of products, we recognize and support the customer’s needs for specialized targets and accessories. Our customers have the ability to speak with a member of our team that is directly involved with the production of your order. This unique and direct approach provides for a smooth and correct transfer of requirements that reduce the risk of misinformation, raises consumer confidence, and makes your critical deadline possible.
UBBSOPTICAL TARGETING SPECIALTIESF O R M E T R O L O G Y S U P P O R T S Y S T E M S
Hubbs Machine & Manufacturing has been certifying, serializing, & satisfying for years. We will certify any critical dimensions you require & list them on the Hubbs official certified product report.
This document is to certify that the following parts have been manufactured precisely to catalog specifications or customer requirements:
HUBBS MACHINE & MANUFACTURING, INC APPROVAL AUTHORITY
CERTIFIED PRODUCTS REPORT
SM AND R ARE REGISTERED TRADEMARKS OF HUBBS MACHINE & MANUFACTURING, INC R R
6282 Rocky Grove, Cedar Hill, Missouri 63016 Phone: 636-285-4388
C E
R T
I F I E D P R E C I S I O
N C
E R T I F I E D P R E C I S I
O N
PRODUCT ID
.5SM-5000-1875-SS VI12508 .4998 .1873 .0001
.5SM-5000-3750-SS VI12509 .4998 .3748 .0000
.5SM-5000-5000-SS VI12510 .5000 .4999 .0001
.5SM-5000-4375-SS VI12511
Vandelay Industries
12547668
DON COOPER
06/03/2013 1 OF 1
.4999 .4374 .0001
SOLD TO
C.O. #
HUBBS CERTIFIER
C.O. DATE CERTIFICATION SERIES #
SERIAL NUMBER HEIGHT OFFSET SHANK DIAMETER CONCENTRICITY /CENTERLINE
COMPLETE INDEX
PTICALTARGETING SPECIALTIES
E
I
J
K
L
THEODOLITES / TOTAL STATIONA1-A17
LASER TRACKER 1.5 SPHERE MOUNTSG1-G45
A
B
C
D
E
F
G
H
I
J
K
L
PHOTOGRAMMETRYB1-B17
RETRO-REFLECTIVE TAPEC1-C6
BUSHINGSD1-D5
ADAPTORSE1-E9
BAR / ROD ITEMSF1-F7
LASER TRACKER .875 SPHERE MOUNTS H1-H4
LASER TRACKER .5 SPHERE MOUNTSI 1-I 13
PROBING TARGETSJ1-J4
MISCELLANEOUSK1-K7
BUILD-A-KITL1-L2
P. 636.285.4388 F. 636.285.5970 www.hubbsmachine.com6282 Rocky Grove / P.O.Box 540 Cedar Hill, Missouri 63016
TSO ORDERING INFORMATION
FAMILY
“H” TO
CENTERLINE
“A” SHANK
DIAMETER
“D”DOT
DIAMETER MATERIAL
TSO
1144 steel, black oxide
finish
TSO 500 2500 020
REFERENCE NOTES
CUSTOMERPROVIDES INFO
TSOSTANDARD
BUILD
HOW TO ORDER PRODUCTS
• Fill in area below arrows with dimensions as well as any white box that gives more than one option.
• Order part using the completed structure. EX: TSO-500-2500-020
STANDARD THEODOLITE TARGET SIZES IN RED FOR EXAMPLE ONLY: PUT YOUR OWN DIMENSIONS IN THIS AREA
STANDARD THEODOLITE TARGET EXAMPLE:
RETRO-REFLECTIVE TARGET EXAMPLE:
TSOR ORDERING INFORMATION
FAMILY
“H” TO
CENTERLINE
“A” SHANK
DIAMETER
“D”DOT
DIAMETER MATERIAL
TSOR
1144 steel, black oxide
finish
TSOR 500 2500 125
REFERENCE NOTES
CUSTOMERPROVIDES INFO
TSORSTANDARD
BUILD
• Fill in area below arrows with dimensions as well as any white box that gives more than one option.
• Order part using the completed structure. EX: TSOR-500-2500-125
RETRO-REFLECTIVE SIZES IN RED FOR EXAMPLE ONLY: PUT YOUR OWN DIMENSIONS IN THIS AREA
When specifying shank sizes on Target or Liner Bushing orders, please identify decimal sizes to four places. Two examples are given below.
CORRECT: 5/16” = .3125INCORRECT: = .312
If a .0005 undersize is required, specify as .3120If a .0008 undersize is required, specify as .2180
CORRECT: 7/32” = .2188INCORRECT: = .218
HOW TO ORDER ( cont’d )
GENERAL NOTES FOR THEODOLITE AND PHOTOGRAMMETRY TARGETING
• Material is 1144 STEEL with BLACK OXIDE FINISH.
• Target dots are located within +/- .0005 on height (unless otherwise noted) or + / - .0005 in relationship of C/L of shank or body.
• All locating shoulders or locating bases are perpendicular to the centerline of the shank and/or body to within .0003 per inch.
• Shank “A” diameter may be any size up to and including 1.000 with a standard tolerance of +.0000 / -.0005. Some limitations apply.
• Dot size, “D” diameter, for standard Theodolite targeting is approximately .010, .020, .030 and .040 with a single reference ring. Standard color is yellow on black face. The most commonly stocked dot size is .020 The dots and rings are filed with a hard colored filler that holds up well to handling, dirt, oils, solvents and other related shop enviroments. Target faces have a light textured finish to reduce glare.
• Retro-Reflective dot size, “D” diameter, for hard-bodied Retro-Reflective targeting, range from approximately up to and including .787 (20mm) Some target dot size limitations apply. Dot sizes available are .062, .092, .125, .157, .187, .200, .250, .312, 9mm, .375, 10mm, .500 and .787 (20mm)
• Standard “H” dimensions are: .3125, 12mm, .500, 24mm, and 1.000
FOR SPECIAL REQUIREMENTS, PLEASE CALL FOR QUOTE. Minimum quantities may apply.
• Fill in area below arrows with dimensions as well as any white box that gives more than one option.
• Order part using the completed structure. EX: 1.5SM-1.000-2500-1144 steel
SPHERE MOUNT SIZES IN RED FOR EXAMPLE ONLY: PUT YOUR OWN DIMENSIONS IN THIS AREA
SPHERE MOUNT EXAMPLE:
1.5 SM ORDERING INFORMATION
FAMILY
“H” TO CENTERLINEOF SPHERE
“A” SHANK
DIAMETERMATERIAL(OPTIONS)
1.5 SM
1.000or
25mm
1144 steelor
(SS)
1.5 SM 1.000 2500 1144 steel
REFERENCE NOTES
CUSTOMERPROVIDES INFO
1.5 SMSTANDARD
BUILD
TARGET, 90° THEODOLITE T90
TARGET, 90° MAGNETIC THEODOLITE T90M
TARGET, CORNER 90° (LEFT or RIGHT HAND) TC/90 LH or RH
TARGET, CORNER 90° (NEG or POS) TC/90 NEG or POS
TARGET, STRAIGHT-ON THEODOLITETSO
TARGET, MAGNETIC THEODOLITETM
TARGET, 45° THEODOLITET45
TARGET, 45° MAGNETIC THEODOLITET45M
FLUSH MOUNT THEODOLITEFM
TARGET, CORNER 45° (LEFT or RIGHT HAND) TC45 LH or RH
TARGET, CORNER 45° (NEG or POS)TC45 NEG or POS
TARGET, BUTTON TB
TARGET BUTTON VARIABLETBV
DOUBLE VECTOR TARGET THEODOLITEDVT
TARGET, CORNER THEODOLITETC 45° DOUBLE VECTOR TARGET THEODOLITE45 DVT
DOUBLE VECTOR TARGET MAGNETICDVTM
THEODOLITE 1.5 SPHERE T 1.5 S
TOTAL STATION 90TS90
TOTAL STATION 90 MAGNETTS90M
TOTAL 1.5 SPHERETOTAL 1.5S
PTICALTARGETING SPECIALTIES
10
1
2
3
4
5
6
7
8
9
13
17
14
15
11
12
16
INDEXA
INDEXTHEODOLITES / TOTAL STATION
SECTION A INDEX THEODOLITES / TOTAL STATION
A
A1
P. 636.285.4388 F. 636.285.5970 www.hubbsmachine.com6282 Rocky Grove / P.O.Box 540 Cedar Hill, Missouri 63016
FAMILY
“H” TO
CENTERLINE
“A” SHANK
DIAMETER
“D”DOT
DIAMETER MATERIAL
T90
1144 steel, black oxide
finish
T90
.45
.45
+/-.0005"H"
+/-.0005"H"
.17 reference ring
"D" dot diameter
"A" diameter+.0000-.0005
"D" dot diameter
.17 reference ring"A" diameter+.0000
-.0005
T90 Used with computer-
aided Theodolite for targeting holes
approximately 90° to line of sight.
on fileCAD
TARGET, 90° THEODOLITE
T90 FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
T90 ORDERINGNormal offsets for targets are: .3125.50001.00012mm 24mm
Other special offsets available, subject to quote.
REFERENCE NOTES
T90 ORDERING INFORMATION
CUSTOMERPROVIDES INFO
T90STANDARD
BUILD
T90 - .500
T90 - 1.000
NOTE- DRAWING NOT TO SCALE
SM® & R® are registered trademarks of Hubbs Machine & Mfg. Inc. THEODOLITES / TOTAL STATION
T90M FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
T90M ORDERINGNormal offsets for targets are: .3125.5001.00012mm 24mm
Other special offsets available, subject to quote.
+/-.0005"H"
magnet
"D" dot diameter
.17 reference ring
T90M Used to target above
and 90° to steel surfaces. The side of the body
may be used to target surfaces, edges, or steps
.2500 away.
TARGET, 90° MAGNETIC THEODOLITE
REFERENCE NOTES
T90M ORDERING INFORMATION
FAMILY
“H” TO
CENTERLINE
“D”DOT
DIAMETER MATERIAL
T90M
1144 steel, black oxide
finish
T90MCUSTOMER
PROVIDES INFO
T90MSTANDARD
BUILD
on fileCAD NOTE- DRAWING NOT TO SCALE
A2
A3
P. 636.285.4388 F. 636.285.5970 www.hubbsmachine.com6282 Rocky Grove / P.O.Box 540 Cedar Hill, Missouri 63016
TC / 90 - LH or RH ORDERING INFORMATIONTC / 90 (LH or RH)
Used with computer-aided Theodolite for
targeting edges and/or surfaces.
TC / 90 LH or RH FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
.2500 +/-.0005 .2500 +/-.0005
magnet magnet
"D" dot diameter
.17 reference ring
c/l of dot
datum "A" aligned with c/l of dot within .0005
c/l of dot
.17 reference ring
"D" dot diameter
on fileCAD
TARGET CORNER, 90° (LEFT HAND or RIGHT HAND)TC / 90-LH
TC / 90-RH
FAMILY
LEFTor
RIGHT HAND
“D”DOT
DIAMETER MATERIAL
TC / 90
LHorRH
1144 steel, black oxide
finish
TC / 90
REFERENCE NOTES
CUSTOMERPROVIDES INFO
TC / 90 -LH or RHSTANDARD
BUILD
NOTE- DRAWING NOT TO SCALE
THEODOLITES / TOTAL STATIONSM® & R® are registered trademarks of Hubbs Machine & Mfg. Inc.
on fileCAD
TC / 90 - NEG or POS ORDERING INFORMATION
.2500 +/-.0005 .2500 +/-.0005
.17 reference ring.17 reference ring
c/l of dotc/l of dot
"D" dot diameter"D" dot diameter
magnet magnet
datum "A" alignedwith c/l of dot within .0005
TC / 90 (NEG or POS)
Used with computer-aided Theodolite for
targeting edges and/or surfaces.
TARGET CORNER, 90° (NEGATIVE or POSITIVE)
TC / 90 NEG or POSFEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
TC / 90-NEG
TC / 90-POS
REFERENCE NOTES
FAMILY
NEGATIVEor
POSITIVE
“D”DOT
DIAMETER MATERIAL
TC / 90
NEGor
POS
1144 steel, black oxide
finish
TC / 90CUSTOMER
PROVIDES INFO
TC / 90-NEG or POSSTANDARD
BUILD
NOTE- DRAWING NOT TO SCALE
A4
A5
P. 636.285.4388 F. 636.285.5970 www.hubbsmachine.com6282 Rocky Grove / P.O.Box 540 Cedar Hill, Missouri 63016
TSO ORDERING INFORMATIONTSO Used with computer-
aided Theodolite for targeting holes
approximately in line with line of sight.
on fileCAD
TARGET, STRAIGHT-ON THEODOLITE
TSO FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
TSO ORDERINGNormal offsets for targets are: .3125.5001.00012mm 24mm
Other special offsets available, subject to quote.
+/-.0005"H"
+/-.0005"H"
.45
.45
"A" diameter
"A" diameter
.17 reference ring
.17 reference ring
"D" dot diameter
"D" dot diameter
+.0000-.0005
+.0000-.0005
FAMILY
“H” TO
CENTERLINE
“A” SHANK
DIAMETER
“D”DOT
DIAMETER MATERIAL
TSO
1144 steel, black oxide
finish
TSO
REFERENCE NOTES
CUSTOMERPROVIDES INFO
TSOSTANDARD
BUILD
NOTE- DRAWING NOT TO SCALE
THEODOLITES / TOTAL STATIONSM® & R® are registered trademarks of Hubbs Machine & Mfg. Inc.
on fileCAD
TM ORDERING INFORMATION
TM FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
TM ORDERINGNormal offsets for targets are: .3125.5001.00012mm 24mm
Other special offsets available, subject to quote.
+/-.0005"H"
+/-.0005"H"
magnet
magnet
.500 +/.0005
.500 +/.0005
"D" dot diameter
"D" dot diameter
.17 reference ring
.17 reference ring
TM Used to target above
steel surfaces. The side of the body may be
used to target surfaces, edges, or steps .2500
away.
TARGET, MAGNETIC THEODOLITE
REFERENCE NOTES
FAMILY
“H” TO
CENTERLINE
“D”DOT
DIAMETER MATERIAL
TM
1144 steel, black oxide
finish
TMCUSTOMER
PROVIDES INFO
TMSTANDARD
BUILD
NOTE- DRAWING NOT TO SCALE
A6
A7
P. 636.285.4388 F. 636.285.5970 www.hubbsmachine.com6282 Rocky Grove / P.O.Box 540 Cedar Hill, Missouri 63016
T45 ORDERING INFORMATIONT45 Used with computer-
aided Theodolite for targeting holes
approximately 45° to the line of sight.
T45 FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
T45 ORDERINGNormal offsets for targets are: .3125.50001.00012mm 24mm
Other special offsets available, subject to quote.
.45
+/-.0005"H"
+/-.0005"H"
.45
"D" dot diameter
.17 reference ring
"A" diameter
c/l of dot
.17 reference ring
"D" dot diameter
"A" diameter
+.0000-.0005
c/l of dot
+.0000-.0005
on fileCAD
TARGET, 45° THEODOLITE
FAMILY
“H” TO
CENTERLINE
“A” SHANK
DIAMETER
“D”DOT
DIAMETER MATERIAL
T45
1144 steel, black oxide
finish
T45
REFERENCE NOTES
CUSTOMERPROVIDES INFO
T45STANDARD
BUILD
NOTE- DRAWING NOT TO SCALE
THEODOLITES / TOTAL STATIONSM® & R® are registered trademarks of Hubbs Machine & Mfg. Inc.
on fileCAD
T45M ORDERING INFORMATION
+/-.0005"H"
magnet
.17 reference ring
"D" dot diameter
c/l of dot
T45M Used to target above steel surfaces when a
45° target face is more applicable. The side of the body may be used
to target surfaces, edges, or steps .2500 away.
TARGET, 45° MAGNETIC THEODOLITE
T45M FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
FAMILY
“H” TO
CENTERLINE
“D”DOT
DIAMETER MATERIAL
T45M
1144 steel, black oxide
finish
T45MCUSTOMER
PROVIDES INFO
T45MSTANDARD
BUILD
NOTE- DRAWING NOT TO SCALE
NOTE- DRAWING NOT TO SCALE
FM ORDERING INFORMATIONFM Used for targeting holes
when a zero height value is required. See FM notes for ordering
specifications on this product.
FAMILY
“A” SHANK
DIAMETER
“D”DOT
DIAMETER MATERIAL
FM
1144 steel, black oxide
finish
FMCUSTOMER
PROVIDES INFO
FMSTANDARD
BUILD
REFERENCE NOTES
on fileCAD
.45
c/l of dot
"A"
"D" dot diameter
+.0000-.0005
FLUSH MOUNT THEODOLITE
FM FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
FM ORDERINGSTANDARD SHANK SIZES:
.1250, .1875, .2500, .3125, .3750, .4375, .5000, .6250,.7500, 1.000, 6mm, 8mm
Other shank sizes possible, but subject to call-out quote.
A8
A9
P. 636.285.4388 F. 636.285.5970 www.hubbsmachine.com6282 Rocky Grove / P.O.Box 540 Cedar Hill, Missouri 63016
TC / 45 (LH or RH)
Used with computer-aided Theodolite for
targeting edges and/or surfaces.
TC / 45 - LH or RH FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
.2500 +/-.0005 .2500 +/-.0005
datum "A" alignedwith c/l of dot within .0005
.2500 +/-.0005
"D" dot diameter
magnet
.17 reference ring
c/l of dot
on fileCAD
TARGET CORNER, 45° THEODOLITE (LEFT HAND or RIGHT HAND)
TC / 45 - LH or RH ORDERING INFORMATION
TC / 45-LH
TC / 45-RH
FAMILY
LEFTor
RIGHT HAND
“D”DOT
DIAMETER MATERIAL
TC / 45
LHorRH
1144 steel, black oxide
finish
TC / 45
REFERENCE NOTES
CUSTOMERPROVIDES INFO
TC / 45 -LH or RHSTANDARD
BUILD
NOTE- DRAWING NOT TO SCALE
THEODOLITES / TOTAL STATIONSM® & R® are registered trademarks of Hubbs Machine & Mfg. Inc.
on fileCAD
.2500 +/-.0005
"D" dot diameter
.17 reference ring
.17 reference ring
"D" dot diameter
c/l of dot
.2500 +/-.0005 .2500 +/-.0005
datum "A" alignedwith c/l of dot within .0005magnet
TC / 45 (NEG or POS)
Used with computer-aided Theodolite for
targeting edges and/or surfaces.
TARGET CORNER, 45° THEODOLITE (NEGATIVE or POSITIVE)
TC / 45 NEG or POS FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
TC / 45 - NEG or POS ORDERING INFORMATION
TC / 45-NEG
TC / 45-POS
REFERENCE NOTES
FAMILY
NEGATIVEor
POSITIVE
“D”DOT
DIAMETER MATERIAL
TC / 45
NEGor
POS
1144 steel, black oxide
finish
TC / 45CUSTOMER
PROVIDES INFO
TC / 45-NEG or POSSTANDARD
BUILD
NOTE- DRAWING NOT TO SCALE
A10
A11
P. 636.285.4388 F. 636.285.5970 www.hubbsmachine.com6282 Rocky Grove / P.O.Box 540 Cedar Hill, Missouri 63016
REFERENCE NOTES
TB ORDERING INFORMATIONTB and TBV Used with computer-aided theodolite for
targeting .125 diameter tooling holes. For any
other requirements, refer to TBV design.
TB FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
TB ORDERINGCan only select dot diameter.
.0500 +/-.0005
.30.1250
.37
.17 reference ring
"D" dot diameter
+.0000-.0005
on fileCAD
TARGET, BUTTON THEODOLITE
.0500 +/-.0005
"B" +/-.010 "A"
"D" dot diameter
.17 reference ring
+.0000-.0005
TARGET, BUTTON VARIABLE THEODOLITE
TBV ORDERING INFORMATION
FAMILY
“A” SHANK
DIAMETER
“B” SHANK LENGTH
“D”DOT
DIAMETER MATERIAL
TBV
1144 steel, black oxide
finish
TBVCUSTOMER
PROVIDES INFO
TBVSTANDARD
BUILD
TBV FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
TBV ORDERINGCustomer has more call-out options than TB.
FAMILY
“D”DOT
DIAMETER MATERIAL
TB
1144 steel, black oxide
finish
TBCUSTOMER
PROVIDES INFO
TBSTANDARD
BUILD
on fileCAD
NOTE- DRAWING NOT TO SCALE
NOTE- DRAWING NOT TO SCALE
THEODOLITES / TOTAL STATIONSM® & R® are registered trademarks of Hubbs Machine & Mfg. Inc.
FAMILY
“A” SHANK
DIAMETER
“D”DOT
DIAMETER MATERIAL
DVT
1144 steel, black oxide
finish
DVTCUSTOMER
PROVIDES INFO
REFERENCE NOTES
DVT STANDARD
BUILD
DVT ORDERING INFORMATION DVT Used to measure location and angularity of a hole.
DVT FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
.2500 +/-.0005
.45
1.250 +/-.0005
"A" diameter
.17 reference ring
"D" dot diameter(2) places
+.0000-.0005
on fileCAD
DOUBLE VECTOR, TARGET THEODOLITE
.2500 +/-.0005
datum "A" alignedwith c/l of dot within .0005
magnet
"D" dot diameter
.17 reference ring
TARGET, CORNER THEODOLITE
TC ORDERING INFORMATION
TC FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
TC Used with computer-aided Theodolite for targeting straight edges.
FAMILY
“D”DOT
DIAMETER MATERIAL
TC
1144 steel, black oxide
finish
TCCUSTOMER
PROVIDES INFO
TC STANDARD
BUILD
on fileCAD
NOTE- DRAWING NOT TO SCALE
NOTE- DRAWING NOT TO SCALE
A12
A13
P. 636.285.4388 F. 636.285.5970 www.hubbsmachine.com6282 Rocky Grove / P.O.Box 540 Cedar Hill, Missouri 63016
45 DVT ORDERING INFORMATION
.17 reference ring(2) places
"D" dot diameter(2) places
.2500 +/-.0005.45
1.250 +/-.0005
tapped 6-32 hole.2500 shank andlarger
"A" diameter+.0000-.0005
45 DVT Used to measure
location and angularity of a hole.
45° DOUBLE VECTOR TARGET THEODOLITE
45 DVTFEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
FAMILY
“A” SHANK
DIAMETER
“D”DOT
DIAMETER MATERIAL
45 DVT
1144 steel, black oxide
finish
45 DVTCUSTOMER
PROVIDES INFO
45 DVTSTANDARD
BUILD
REFERENCE NOTES
on fileCAD NOTE- DRAWING NOT TO SCALE
THEODOLITES / TOTAL STATIONSM® & R® are registered trademarks of Hubbs Machine & Mfg. Inc.
DVTM ORDERING INFORMATION DVTM Used to measure location and angularity of a surface.
DVTM FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)
1.500 +/-.0005
.500 +/-.0005
"D" dot diameter(2) places
.17 reference ring
magnet
DOUBLE VECTOR, TARGET MAGNET
2.000 +/-.0005
1.000 +/-.0005
"D" dot diameter(2) places
.17 reference ring
magnet
FAMILY
“H” TO
FIRST DOT
“D”DOT
DIAMETER MATERIAL
DVTM
1144 steel, black oxide
finish
DVTMCUSTOMER
PROVIDES INFO
DVTM STANDARD
BUILD
REFERENCE NOTES
DVTM - .500
DVTM - 1.000
on fileCAD NOTE- DRAWING NOT TO SCALE
A14
A15
P. 636.285.4388 F. 636.285.5970 www.hubbsmachine.com6282 Rocky Grove / P.O.Box 540 Cedar Hill, Missouri 63016
T1.5S Provides same
centerline value as a Spherically Mounted Retro-
Reflector. This allows interchangeability from
Laser Trackersystems to computer-aided
Theodolite systems.
T1.5S FEATURESHARDENED STAINLESS STEEL SHELL/SPHERE R/C 53 – 55 with 1144 STEEL, BLACK OXIDE INSERT.
1.500
45°
c/l of sphere
target face on c/l within+/-.0005
0.50 .01, .02, .03, or .04target dot on c/l of sphere within +/-.0005
+.0000-.0005
on fileCAD
THEODOLITE 1.5 SPHERE
REFERENCE NOTES
T1.5S ORDERING INFORMATION
FAMILY
“D”DOT
DIAMETER MATERIAL
T1.5S.01, .02, .03,
.04
stainless steel(ss) and
ll44 steel
T1.5SCUSTOMER
PROVIDES INFO
T1.5SSTANDARD
BUILD
NOTE- DRAWING NOT TO SCALE
THEODOLITES / TOTAL STATIONSM® & R® are registered trademarks of Hubbs Machine & Mfg. Inc.
TS90Used with Total Station
for targeting holes approximately 90
degrees to line of sight.
TS90MUsed with Total Station
to target above and 90 degrees to surface.
Magnetic base securely attaches target to steel
surface.
TS90M FEATURES1144 STEEL BLACK OXIDE FINISH
TS90 FEATURES1144 STEEL BLACK OXIDE FINISH
on fileCAD
on fileCAD
TOTAL STATION 90 MAGNET
TOTAL STATION 90
REFERENCE NOTES
TS90 ORDERING INFORMATION
TS90M ORDERING INFORMATION
FAMILY
“H”TO
CENTERLINE
“A”SHANK
DIAMETER
“D”DOT
DIAMETER MATERIAL
TS90 1.000 .040
1144 steel, black oxide
finish
TS90
FAMILY
“H”TO
CENTERLINE
“D”DOT
DIAMETER MATERIAL
TS90M 1.000 .040
1144 steel, black oxide
finish
TS90M
CUSTOMERPROVIDES INFO
CUSTOMERPROVIDES INFO
TS90STANDARD
BUILD
TS90MSTANDARD
BUILD
NOTE- DRAWING NOT TO SCALE
NOTE- DRAWING NOT TO SCALE
0.45
"H"+/-.0005
"D" dot diameter
"A" diameter
reflective material
+.0000-.0005
"H"+/-.0005
"D" dot diameter
reflective material
magnets
A16
A17
P. 636.285.4388 F. 636.285.5970 www.hubbsmachine.com6282 Rocky Grove / P.O.Box 540 Cedar Hill, Missouri 63016
TOTAL1.5S Provides same centerline
value as a Spherically Mounted Retro-
Reflector. This allows interchangeability from
Laser Tracker systems to Total Station systems.
TOTAL1.5S FEATURESHARDENED STAINLESS STEEL SHELL/SPHERE R/C 53 – 55 with 1144 STEEL, BLACK OXIDE INSERT.
on fileCAD
TOTAL STATION 1.5 SPHERE
REFERENCE NOTES
TOTAL1.5S ORDERING INFORMATION
FAMILY
“D”DOT
DIAMETER MATERIAL
TOTAL1.5S .040
stainless steel(ss) and
ll44 steel
TOTAL1.5SCUSTOMER
PROVIDES INFO
TOTAL1.5SSTANDARD
BUILD
NOTE- DRAWING NOT TO SCALE
45°
1.500 0.530 "D" dot diameter
reflective material
c/l of sphere
target face on c/l within+/-.0005
+.0000-.0005
ENDTHEODOLITES / TOTAL STATION
A
PTICALTARGETING SPECIALTIES