u10 ppp dialup setting user guide (windows) · u10 ppp dialup setting user guide (windows)...
TRANSCRIPT
U10 Quectel Cellular Engine
U10 PPP
Dialup Setting
User Guide (Windows)
U10_PPP_Dialup_Setting_User_Gudie_(Windows)_V1.0
U10 PPP Dialup Setting User Guide (Windows)
U10_PPP_Dialup_Setting_User_Gudie_(Windows)_V1.0 - 1 -
Document Title U10 PPP Dialup Setting User Guide (Windows)
Version 1.0
Date 2012-04-23
Status Released
Document Control ID U10_PPP_Dialup_Setting_User_Gudie_(Windows)_V1.0
General Notes
Quectel offers this information as a service to its customers, to support application and
engineering efforts that use the products designed by Quectel. The information provided is based
upon requirements specifically provided for customers of Quectel. Quectel has not undertaken any
independent search for additional information, relevant to any information that may be in the
customer’s possession. Furthermore, system validation of this product designed by Quectel within
a larger electronic system remains the responsibility of the customer or the customer’s system
integrator. All specifications supplied herein are subject to change.
Copyright
This document contains proprietary technical information of Quectel Co., Ltd. Copying this
document, distribution to others, and communication of the contents thereof, are forbidden without
permission. Offenders are liable to the payment of damages. All rights are reserved in the event of
a patent grant or registration of a utility model or design. All specifications supplied herein are
subject to change without notice at any time.
Copyright © Quectel Wireless Solutions Co., Ltd. 2012.
Quectel
Confidential
U10 PPP Dialup Setting User Guide (Windows)
U10_PPP_Dialup_Setting_User_Gudie_(Windows)_V1.0 - 2 -
Contents
Contents ............................................................................................................................................ 2
0. Revision history ............................................................................................................................ 3
1. Introduction ................................................................................................................................... 4
1.1. Reference ............................................................................................................................. 4
1.2. Terms and abbreviations ...................................................................................................... 4
2. Install USB driver ......................................................................................................................... 5
3. Setup PPP connection ................................................................................................................... 6
3.1. Add new operator to the list ................................................................................................ 6
3.2. Install Modem driver and setup PPP connection ................................................................. 7
4. Make a PPP connection ............................................................................................................... 10
Quectel
Confidential
U10 PPP Dialup Setting User Guide (Windows)
U10_PPP_Dialup_Setting_User_Gudie_(Windows)_V1.0 - 3 -
0. Revision history
Revision Date Author Description of change
1.0 2012-04-12 Amon WU Initial
Quectel
Confidential
U10 PPP Dialup Setting User Guide (Windows)
U10_PPP_Dialup_Setting_User_Gudie_(Windows)_V1.0 - 4 -
1. Introduction
This document introduces the detailed steps for setting up a PPP connection in the WCDMA
network.
1.1. Reference
Table 1: Reference
SN Document name Remark
[1] U10_ATC AT Commands Set
[2] U10_HD Hardware Design
1.2. Terms and abbreviations
Table 2: Terms and abbreviations
Abbreviation Description
USB Universal Serial Bus
COM Port Communication Port
WCDMA Wideband Code Division Multiple Access
PPP Peer-Peer Protocol
Quectel
Confidential
U10 PPP Dialup Setting User Guide (Windows)
U10_PPP_Dialup_Setting_User_Gudie_(Windows)_V1.0 - 5 -
2. Install USB driver
For the first time to get the PC connected to the module via USB cable, please install the USB
driver first. Quectel provides the USB Driver on Windows Operating System (OS).
After installing the USB driver, there will be two virtual COM ports appeared in the Device
Manager as below: the USB Application Port (COMx) and the Modem Port (COMx). The USB
Modem Port is recommended to do the dial-up connection and the USB Application Port is used
to send AT commands.
Quectel
Confidential
U10 PPP Dialup Setting User Guide (Windows)
U10_PPP_Dialup_Setting_User_Guide_(Windows)_V1.0 - 6 -
3. Setup PPP connection
Quectel provides the tool named “PPP Dialup Setting” to help the customer install the modem and
setup PPP connection before dialup to the internet. Please refer to the following descriptions for
the operation guide.
3.1. Add new operator to the list
Uncompress the installation package, enter into PPPDialUp_Setting directory, you will see the
following documents:
Open DialUpSetting.ini file, refer to the following instructions to add the local operators. If the
operator information has been included, ignore this section.
Quectel
Confidential
U10 PPP Dialup Setting User Guide (Windows)
U10_PPP_Dialup_Setting_User_Guide_(Windows)_V1.0 - 7 -
3.2. Install Modem driver and setup PPP connection
You can manage the dial-up setting on the setting window, including the following operations:
Start DialupSetting.exe
Select network operator and connected port
Define connection name
Click to install the Modem and setup the connection.
Note: Connected Port selection should be consistent with the USB Modem Port.
1: PPP connection name
2: Port
3: Network operator
4: To cancel the operation
5: To install Modem
6: About Dialog box
Note: When identification of new hardware or warning message appears during the installation,
please select to continue the installation.
Quectel
Confidential
U10 PPP Dialup Setting User Guide (Windows)
U10_PPP_Dialup_Setting_User_Guide_(Windows)_V1.0 - 8 -
After successful installation, there will be Quectel WCDMA Modem under Modems entries
in Device Manager. And the shortcut icon of WCDMA connection will appear in the network
connection.
Quectel
Confidential
U10 PPP Dialup Setting User Guide (Windows)
U10_PPP_Dialup_Setting_User_Guide_(Windows)_V1.0 - 9 -
Quectel
Confidential
U10 PPP Dialup Setting User Guide (Windows)
U10_PPP_Dialup_Setting_User_Guide_(Windows)_V1.0 - 10 -
4. Make a PPP connection
Now you can establish a connection to WCDMA networks anytime when you need. Double-click
the WCDMA Connection, as shown in the following figure, click to start the
PPP dial-up connection.
You can also set properties before connecting, so you can see the process of dial-up connection:
Quectel
Confidential
U10 PPP Dialup Setting User Guide (Windows)
U10_PPP_Dialup_Setting_User_Guide_(Windows)_V1.0 - 11 -
Shanghai Quectel Wireless Solutions Co., Ltd.
Room 501, Building 13,No.99 Tianzhou Road, Shanghai, China, 200233
Tel: +86 21 5108 6236
Mail: [email protected]