zuJ@saol(\olo-frr)g(o(\

I(oo1\oN

zIJJcOsoN9osfroLL

Name:

TYPE CERTIFICATECzech

Registration number 11.509 ,270, Revision No. 1

issued by Product Certification Body No. 3084, accredited by the CzechAccreditation Institute in accordance with esN EN ISO/IEC 17Q65:2013

for the manufacturer:

UZdaroji akcin6 bendrov6,,METALOIDAS"Kreivoji g. 39

LT - 76120 Siauliq m., Siauliq m. sav. LithuaniaCompany Registration No.: LT453761113

for the product:

lmpact attenuating playground surfacingType/critical heightoffall: 2lO,6m 3/0,9m 411,2m 511,4m

Description:

6/1,6m 711,7m B/1,8mthe surface consists of square single{ayer rubber tiles withdimensions of 500 x 500 mm and thickness given in thenumerical designation of type in cm (2,3,4, 5, 6 ,7 and 8 cm).Type 2 is smooth without grid pattem; the other types have a15-mm deep grid pattem.

Pface of the production: Pakruojo st. 44, LT - 76126 Siauliai, Lithuania

at which the certification has been condu.cted .pursuant to ISO/IEC 17067 - scheme 1a

certification scheme in accordance with TUV SUD Czech certification system. The resultsare stated in Evaluatlon report file No. 1 1.508.998 from 08.02.2018.

The product type mentioned above fulflls the applicable requlrements of the followingregulations/standards which were the basis for its evaluation:

EN 1 176-1:2008 (eSN EN 1 176-1:2009), EN 1 177=200S (eSN EN 1 177=20091

This certificate is valid till: 15.02.2023

Details and validity conditions are stated in the annex which forms an integral part of thls

Certificate and contains 1 page.

This certificate is issued on the basis of voluntary certification, and it does not substituteoutputs of the authorized or notified body.

Prague, 22.06.2018

v 3084

(-,/4/

Head of the certification body

TUV SUD Czech s.r.o. . Novodvorskfr 994 r 14221 Prague 4 o Czech Republic o certification@tuv-sud,czTUV@ Page 1 ofthe annex

1.

2.o

3.

Annex to the Certificate No. 11.509.270, Revision No. 1

The product specimen was entered for evaluation and type certification on 17.01.2018.

The Certificate was issued on the basis of the documents provided by the client:Application for certification from 17.01.2018.

The certificate does not constitute a confirmation of the Certification Body that subsequentproduction conforms with the certified type.

Detailed technical data characterizing the product type:

Name: lmpact attenuating playground surfacing

4.

Type / critical height of fall: 2 | 0,6 m

6/1,6m3/0,9m7 11,7 m

411,2m8/1,8m

511,4m

Description: The surface consists of square single-layer rubber tiles with dimensions of 500x 500 mm and thickness given in the numerical designation of type in cm (2,3,4, 5, 6, 7 and 8 cm). Type 2 is smooth without grid paftern; the other types havea 1S-mm deep grid pattern.

5. List of important parts of the technical documentation:o lt is stated in the Evaluation Reportfile No. 11.508.998 dated 08.02.2018.

6. Validity Conditionso The certificate shall apply only to its holder and products and production places mentioned

therein.o The transfer of the certificate by its owner to third parties is inadmissible as well as the use

of certificate by third parties.o TUV SUO Czech shall be notified forthwith of any product modifications compared to the

certified specimen. This fact may cause the certificate continuation dependent on anadd itional conform ity evaluation.

o Supervision is not performed.o The certificate can be renewed on request.. The certificate shall only be reproduced complete including all the annexes.. The right to use TUV SUD Czech certification mark was not established to the certificate.o The certificate holder commits to keep records of all the relevant complaints concerning

the conformity of the products with the requirements of regulations and standards and makethose records available to the certification body TUV SUD Czech.

o Not specified items (advertising, use of certificates) are governed by the GeneralConditions for Product Certification, as amended.

This language version of the certificate is a translation of a Czech official versionNo. 11.509.270, Revision No. 1 issued on 22.06.2018, which is deemed the only oneapplicable in the event of legal disputes and was printed on 22.06.2018.

This certificate is a revision No. 1 of the certificate No. 11.509.270, issued 15.02.2018.