4000® Series Raceway is the work horse of surface raceway systems. 4000 Series Raceway can be divided for multi-service applications. 4000 Series Raceway is ideal for applications requiring a large cable capacity dual service steel raceway. Commercial, institutional, and industrial applications all benefit from the rigid steel construction and durable ivory ScuffCoat™ finish of this raceway. 4000 Series Raceway is also ideal for municipalities that require either all steel construction or prohibit nonmetallic cable management systems.

WIREMOLD®

Steel Raceway Systems

Two-Piece Steel Surface Raceway Available Factory Prewired

– New 4047 Faceplates. One-piece device bracket with overlapping cover design that hides bad cuts and unsightly seams where device plates abut raceway covers.

– FiberReady 2" (51mm) Fiber Optic Radius Fittings. UL and cUL verified and exceed the recommendations of TIA/EIA 569A. Available as full capacity fittings or inserts to be used for existing installations.

– Large cross section area. Provides ample space for large wiring requirements.

– Complete line of fittings. Provides complete wiring solution and allows for interconnection between raceway systems.

– Gray baked enamel and ivory ScuffCoat™ finish. Durable ivory Scuffcoat finish makes a scratch resistant surface.

– Feeder or header system. Ideal for overhead, open spaces and under raised floor applications.

– 16208 nonmetallic device plates. Overlapping design offers an aesthetically pleasing way to cover seams. Available in gray or Ivory.

– Base and cover cutters. Manually operated cutters are lightweight and portable. Cutters offer labor savings for any size job and maintain a factory clean and square end cut.

– Datacom connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use.

– UL5 and ADA compliant. Raceway and fittings meet UL5 standards and can be installed in conformance with ADA requirements.

– UL Listed multioutlet assemblies. File E68073 Guide PVGT. Fittings: File E121188 Guide RJPR. Meets Article 380 of NEC and meets Section 12-3023 of CEC.

– cULus Listed surface metal raceway system. File E4376 Guide RJBT. Fittings: File E41751, Guide RJPR. Meets Article 386 of NEC and meets Section 12-1600 of CEC.

F E A T U R E S & B E N E F I T S

4000 Series Raceway in a typical dorm room application.

PREWIRED FIBER OPTIC CAT5SURGEA/V INTEGRATION COMMUNICATIONS

2

NOTE: Illustration is for showing product applications only.

16199

16200

16205

16201

1620216208

16212

16198

16201

4000 SERIES RACEWAy SySTEM LAyOUT

Part No. Description/Specifications

16195 Base .050" galvanized steel. Packed five 10' (3.050m) lengths per carton. Base has two 9/32" (7.1mm) diameter KOs on centers of approximately 18" (457mm) throughout.

16196 Cover .040" (1.0mm) galvanized steel. Packed ten 5' (1.5mm) lengths per carton.

Part No. Description/Specifications

16197 Divider .040"galvanized steel. One side painted buff primer to provide identification of compartments. *Packed ten 5' (1.5m) lengths – 50' (15.2m) per carton. *4001DA divider clips are required to hold divider in place.

4000 SERIES RACEWAy

1 3/4"[44mm]

4 3/4"[121mm]

4 3/4"[121mm]

1 17/32"[39mm]

3

* Faceplates can also be used with 6000 Series Raceway.

New 4047 Faceplates accommodate a wide range of power and communications applications.

Part No. Description/Specification

16198 Blank End For closing open end of 4000 Base. Has two 1/2" trade size KOs.

16199 Divided Entrance End Fitting Has concentric 3/4", 1", and 11/4" trade size KOs on end and bottom for feeding 4000 Raceway. Furnished with removable divider and 11/4" (32mm) bend radius controlled insert.

16200 Flat Elbow For right angle turns on the same surface.

Part No. Description/Specifications

16201 Internal Elbow For 90º internal corners. Fiber bushing included.

16202 External Elbow For 90º external corners.

4000 SERIES RACEWAy

1 1/4"[32mm]

2 3/4"[70mm]

5 1/4"[133mm]

4 3/4"[121mm]

6 1/2"[165mm]

1 3/4"[44mm]

4 3/4"[121mm]

3 1/8"[79mm]

1 1/2"[38mm]

4 1/8"[105mm]

4 11/16"[119mm]

4

NOTE: Faceplates can also be used with 6000 Series Raceway.

Part No. Description/Specifications

16203 Two-Gang Overlapping Cover Two Duplex Receptacles For 15A and 20A duplex receptacles. Accepts 106 Communications Duplex Frame.

16204 Two-Gang Overlapping Cover Duplex & Modular Furniture For 15A and 20A duplex receptacles. Includes combination modular furniture and two keystone twistouts. Accepts modular furniture adapter, 106 Communications Duplex Frame or RJ45.

16205 Two-Gang Overlapping Cover Duplex Receptacle For 15A and 20A duplex receptacles. Accepts 106 Communications Duplex Frame.

Part No. Description/Specifications

16206 One-Gang Overlapping Device Plate Use with commercially available single gang flush plate (sold separately).

16207 Two-Gang Overlapping Cover Rectangle Opening For rectangular GFCI, Surge and decorator style devices. Does not accept 5507 Series Faceplates.

4047 SERIES COvER PLATES

5 1/8"[130mm]

4 3/4"[121mm]

5 1/8"[130mm]

4 3/4"[121mm]

5 1/8"[130mm]

4 3/4"[121mm]

5 1/8"[130mm]

4 3/4"[121mm]

5 1/8"[130mm]

4 3/4"[121mm]

NOTE: All faceplates are 4 1/4" long x 1 11/16" wide [108mm x 43mm]. * Add “G” suffix to indicate gray finish. Not for use with 4048BF and 4048RF Device Covers.

Part No. Description/Specifications

16208 Device Mounting Bracket High impact plastic mounting bracket and trim plate which overlap raceway cover providing a seamless transition. For use with 5507 Series Faceplates, Ortronics® TracJack & Series II Modules, Pass & Seymour Activate Series Inserts, and Wiremold Open System Communication Modules.

16209 Duplex Faceplate For covering duplex style devices. Accepts 106 Communication Duplex Frame.

16210 Rectangular Faceplate For mounting commercial device plates. Installs between the device bracket and a device.

Part No. Description/Specifications

16211 Blank Faceplate For covering unused compartments in the device bracket.

16212 Dual RJ11/RJ45 Connector Faceplate For mounting one or two RJ type keystone connectors – has one opening and a KO for the other.

16213 Ortronics Faceplate For mounting Ortronics® communication inserts. Accepts four TracJack Devices.

4050 SERIES FACEPLATE

4 11/16"[119mm]

6"[152mm]

7/16"[11.1mm]

6

2400 RACEWAy WIRE FILL CAPACITIES FOR COMMUNICATIONSO.D. DIvIDED UNDIvIDED

TyPE CABLE/WIRE SIZE Inches (mm) 40% FILL 40% FILL

UNSHIELDED TWISTED PAIR

4-Pair, 24 AWG, Cat3 4-Pair, 24 AWG, Cat5e 4-Pair, 24 AWG, Cat6 4-Pair, 24 AWG, Cat6a 25-Pair, 24 AWG

0.190 0.210 0.250 0.354 0.410

4.8 5.3 6.3 8.9 10.4

49 40 28 14 10

101 83 58 29 21

COAXIAL RG6/U 0.270 6.9 24 50

FIBER ZipCord Round 4-Strand Fiber Round 6-Strand Fiber

0.118 x 0.236 0.187 0.256

3 x 6 4.8 6.5

50 51 27

103 104 55

4000 SERIES RACEWAy WIRE FILL CAPACITy ChARTS

* For additional information, refer to section T1 of the current version of catalog ED1560 (Product Guide)

* Category 6 augmented (6a) cable for 10 gigabit ethernet – max allowed cable diameter per addenda No. 11 ANSI TIA/EIA 568-B.2.

4000 SERIES RACEWAy WIRE FILL CAPACITIES FOR POWERNUMBER OF CONDUCTORS (40% FILL)

WIRE SIZE ThhN/ThWN

O.D.

Inches (mm)WIThOUT DEvICES

WITh SURGE GFCI DEvICES

2.30 IN2 (1485mm2)

WITh SURGE GFCI DEvICES

2.30 IN2 (1485mm2)

WITh SURGE GFCI DEvICES

2.30 IN2 (1485mm2)

UNDIv. DIvIDED UNDIv. DIvIDED UNDIv. DIvIDED UNDIv. DIvIDED

14 AWG 12 AWG 10 AWG

8 AWG 6 AWG 4 AWG 3 AWG 2 AWG

0.111 0.130 0.164 0.216 0.254 0.324 0.352 0.384

2.8 3.3 4.2 5.5 6.5 8.2 8.9 9.8

296 216 136 78 56 34 29 24

127 93 58 33 24 15 12 10

165 120 76 43 31 0 0 0

78 57 36 20 15 0 0 0

107 78 49 28 20 0 0 0

49 36 22 13 9 0 0 0

49 36 22 13 9 0 0 0

20 15 9 5 3 0 0 0

4000 SERIES RACEWAy WIRE FILL CAPACITIES WhEN USING 4000 RADIUS INSERTS

CABLE WIRE SIZE

O.D.

Inches (mm)16200 FLAT ELBOW

40% FILL16201 & 16202 ELBOWS

40% FILL

4011DRI DIvIDED

4011/4015RI UNDIvIDED

4017/18RI DIvIDED

4017/18RI UNDIvIDED

POWER WIRING THHN/THWN

2 AWG 4 AWG 6 AWG 8 AWG

10 AWG 12 AWG 14 AWG

0.384 0.324 0.254 0.216 0.164 0.130 0.111

9.8 8.2 6.5 5.5 4.2 3.3 2.8

11 15 24 34 68 107 145

21 30 48 67 136 214 288

6 8 13 18 36 56 75

11 15 25 35 71 112 151

UNSHIELDED TWISTED PAIR

CAT3 UTP CAT5e UTP CAT6 UTP

CAT6a UTP 25-PAIR

0.190 0.210 0.250 0.354 0.410

4.8 5.3 6.3 9.0 10.4

44 36 23 16 9

88 72 47 31 19

23 19 12 9 5

46 38 24 15 10

COAXIAL RG6/U 0.270 6.9 22 44 22 23

FIBER OPTIC Fiber ZipCord Round Fiber 4-Strand

0.118 x 0.236 (3 x 6) 0.187 4.8

132 44

263 88

69 23

137 46

7

DATACOM CONNECTIvITy OPTIONS

Now you have a wide range of options for providing datacom connectivity into Wiremold/Legrand Pathways. They are:

• Ortronics® TracJack® and Series II Modular Connectivity Solutions • Pass & Seymour Activate™ Modular Inserts • Open System Communication Modules

Ortronics® Connectivity TracJack® Individual Jack System

• Front-loading, snap-in design supports future moves adds and changes • Inserts for voice, data, audio, and video • Available Category 3, 5e, 6, USOC 6-position, and other media• Flat or angled 45° exit configurations • Choice of 13 colors and color matched to Wiremold Systems • Universal T568A/B wiring format

Series II Front-Loading, Module System • Module design features easy snap-in front-loading design • Linear 110 punch down format for easy termination • Inserts for voice, data, audio, and video • Available Category 3, 5e, 6, USOC 6-position, and other media• Available in flat or angled 45° exit configurations • Color matched to Wiremold Systems

For detailed product selection refer to the Ortronics Catalog or visit www.ortronics.com.

Pass & Seymour Legrand Network Wiring Activate™ Series Front-Loading Inserts

• Modular inserts for voice, data, audio and video applications • Front-load, snap-in design • Color and texture matched to Wiremold Systems • Available Category 3, 5e, 6, as well as 6-position USOC • Universal T568A/B wiring format

For detailed product selection refer to the Pass & Seymour Network Wiring Catalog or visit www.passandseymour.com.

Open Connectivity Solutions Wiremold Open System Communications Modules

• Accommodate a wide range of manufacturers’ communications outlets including keystone jacks, as well as proprietary solutions from Avaya (Systimax) and NORDX

• Modules insert into a wide range of Wiremold Systems • Pre-punched faceplates accept common communication devices

DATACOM CONNECTIVITY OPTIONS

NOTE: For more information on integrating connectivity into Wiremold Cable Management Systems contact the Wiremold Applications Engineering Team or your local Wiremold Sales Representative.

8

C2G & WIREMOLD PART NUMBER CONvERSION ChARTC2G Part Number Wiremold Part Number Item Description: 4000 Series Raceway

16195 V4000B-10 Ivory Raceway Base - 10ft (5 Pack)

16196 V4000C Ivory Raceway Cover - 5ft (10 Pack)

16197 G4000D Raceway Divider - 5ft (10 Pack)

16198 V4010B Ivory Blank End

16199 V4010DFO Ivory Divided Entrance End Fitting

16200 V4011 Ivory 90 Degree Flat Elbow

16201 V4017 Ivory Internal Elbow

16202 V4018 Ivory External Elbow

16203 V4047BB Ivory Two-Gang Overlapping Cover, Two Duplex Receptacles

16204 V4047BF Ivory Two-Gang Overlapping Cover, Duplex and Modular Furniture

16205 V4047BX Ivory Two-Gang Overlapping Cover, Duplex Receptacle

16206 V4047C-1 Ivory One-Gang Overlapping Device Plate

16207 V4047RX Ivory Two-Gang Overlapping Cover, Rectangle Opening

16208 V4050 Ivory Device Mounting Bracket

16209 5507D Ivory Device Mounting Duplex Faceplate

16210 5507R Ivory Device Mounting Rectangle Faceplate

16211 5507B Ivory Device Mounting Blank Faceplate

16212 5507RJ Ivory Device Mounting Dual RJ11 / RJ45 Connector Faceplate

16213 5507-4TJ Ivory Device Mounting Ortronics TrackJack Faceplate

Cables To Go 3555 Kettering Blvd. Moraine, OH 45439 Phone: 800.287.2843 www.c2g.com

© 2

015

Leg

rand

A

ll Ri

ghts

Rese

rved

re

v.06

/15

Te

ch S

pec

Shee

t – 1

2538