twain english

7/31/2019 TWAIN English

1/36

Users Guide


2/36TWAIN Driver x-1

Contents

1 Introduction1.1 Welcome ............................................................................................1-1

1.2 END USER LICENSE AGREEMENT .................................................1-2

1. SOFTWARE ................................................................................1-2

2. LICENSE AGREEMENT ..............................................................1-2

3. LICENSE .....................................................................................1-2

4. RESTRICTIONS ..........................................................................1-3

5. LIMITED WARRANTY .................................................................1-3

6. LIMITATION OF REMEDIES .......................................................1-3

7. TERMINATION ............................................................................1-3

8. GOVERNING LAW ......................................................................1-3

9. GOVERNMENT END USERS ......................................................1-4

1.3 Trademark acknowledgements .......................................................1-5

1.4 User instructions ...............................................................................1-6

For U.S.A. users FCC part 15-Radio frequency devices ................ 1-6

For Canada users Interference-causing equipment standard

(ICES-003 issue 3) ..........................................................................1-7

For Europe users CE Marking (Declaration of conformity) .............1-7For users in countries subject to class B regulations .....................1-7

For users in countries not subject to class B regulations ..............1-7

2 Setting up PC scanning

3 Connecting to the machine

Connecting to the USB port of the machine ..................................3-1

4 Installing the TWAIN driver

4.1 Installation under Windows XP/Server 2003 ..................................4-1

Installing the TWAIN driver under Windows XP/Server 2003 .........4-1

Reinstalling the TWAIN driver (for Windows XP/Server 2003) ........ 4-2

4.2 Installation under Windows 2000 .....................................................4-3

Installing the TWAIN driver under Windows 2000 ..........................4-3

Reinstalling the TWAIN driver (for Windows 2000) .........................4-4


3/36TWAIN Driver x-2

4.3 Installation under Windows Me/98 SE ............................................4-5

Installing the TWAIN driver under Windows Me/98 SE ..................4-5

Reinstalling the TWAIN driver (for Windows Me/98 SE) .................4-6

5 How to scan document

5.1 Using the auto document feeder .....................................................5-1

How to scan documents using the auto document feeder ............5-1

5.2 Using the original glass ....................................................................5-2

How to scan documents using the original glass ...........................5-2

6 Common settings

6.1 Auto options ......................................................................................6-1

Original size ....................................................................................6-2Scan type ........................................................................................6-2

Resolution .......................................................................................6-2

Over view window ..........................................................................6-3

6.2 Manual options ..................................................................................6-4

Sharp ..............................................................................................6-5

Curves ............................................................................................6-5

Level ...............................................................................................6-5

Color balance .................................................................................6-5

Hue/Saturation ...............................................................................6-5

7 Error message

7.1 Original document jam .....................................................................7-1

To clear a misfeed in the auto document feeder ............................ 7-2

7.2 Memory full ........................................................................................7-3

7.3 Communication error ........................................................................7-4

7.4 Scanner busy .....................................................................................7-5

7.5 Read data error .................................................................................7-6


4/36

Introduction 1

TWAIN Driver 1-1

1 Introduction

1.1 WelcomeThis manual provides information on setting up and using a machine as a

scanner.

Read these instructions thoroughly before using the functions.

For instructions on using the machine itself and for general safety precau-

tions, refer to the manual provided with the machine.

Store the users guide and the enclosed CD-ROM in a safe location for future

reference.

2

Note

No part of this manual may be copied or reproduced, either in part or in

whole, without prior permission.

The contents of this manual are subject to change without notice.

No part of the manual may be reproduced or modified without prior per-

mission.

Screen images used in this manual may differ from the actual screen dis-

play.


5/36

Introduction 1

TWAIN Driver 1-2

1.2 END USER LICENSE AGREEMENT

PLEASE READ CAREFULLY THE LICENSE AGREEMENT BELOW BEFORE

INSTALLING THE SOFTWARE. INSTALLING THE SOFTWARE INDICATES

YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS BELOW. IF YOU

DO NOT AGREE WITH THEM, YOU SHOULD PROMPTLY RETURN THESOFTWARE UNUSED.

1. SOFTWARE

Software means the computer program contained in the package, together

with all codes, techniques, software tools, format, design, concepts, meth-

ods and ideas associated with the computer program and all documentation

related thereto.

2. LICENSE AGREEMENTThis is a license agreement for sale. KONICA MINOLTA BUSINESS TECH-

NOLOGIES, INC. or its affiliate company (hereinafter collectively KONICA

MINOLTA) owns, or has been licensed from other owners (KONICA MI-

NOLTAs Licensor), copyrights in the Software. Except as in this Agree-

ment, you are not granted any rights to patents, copyrights, trade names,

trademarks (whether registered or unregistered), or any other rights, fran-

chises or licenses in respect of the Software. Title to the Software and any

copy made from it is retained by KONICA MINOLTA or KONICA MINOLTAs

Licensor.

3. LICENSE

KONICA MINOLTA, hereby grand to you, and you agree to accept a non-ex-

clusive, non-transferable and limited license and you may:

(1) install and use the Software on a single computer.

(2) use the Software only for your own customary business or personal pur-

pose.

(3) make a copy of the Software for backup or installation purpose only insupport of the normal and intended use of the Software.

(4) transfer possession of copies of the Software to another party by trans-

ferring a copy of this Agreement and all other documentation along with at

least one complete unaltered copy of the Software, provided that (i) you, at

the same time, either transfer to such other party or destroy all your other

copies of the Software, (ii) such transfer of possession terminates your li-

cense with KONICA MINOLTA, and (iii) such other party shall accept and be

bound by these license terms with their initial use of the Software.


6/36

Introduction 1

TWAIN Driver 1-3

4. RESTRICTIONS

(1) You shall not without the written consent of KONICA MINOLTA:

(i) use, copy, modify, merge or transfer copies of the Software except as pro-

vided herein, (ii) reverse assemble or reverse compile the Software except as

permitted by law; or (iii) sublicense, rent, lease or distribute the Software or

any copy thereof.

(2) You shall not export or re-export the Software in any from under violation

of export restrictions by the government of your country.

5. LIMITED WARRANTY

KONICA MINOLTA warrants the media on which the software is recorded to

be free from defects in materials and workmanship under normal use. War-

ranty details and limitations for the Hardware containing the Software are de-

scribed in the Statement of Limited Warranty which was supplied with thehardware. With the exception of the foregoing express warranties applicable

to hardware and media only, the Software is not warranted and is provided

AS IS.

SUCH WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EX-

PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

6. LIMITATION OF REMEDIES

IN NO EVENT WILL KONICA MINOLTA BE LIABLE FOR ANY LOST PROF-

ITS, LOST DATA, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL

DAMAGES THAT RESULT FROM USE OR INABLITY TO USE THE SOFT-

WARE, EVEN IF KONICA MINOLTA, KONICA MINOLTA LICENSOR OR ITS

AUTHORISED REMARKETERS HAVE BEEN ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES OR FOR ANY CLAIM BY YOU BASED ON A THIRD

PARTY CLAIM.

7. TERMINATION

You may terminate your license at any time by destroying the Software and

all your copies of it or as otherwise described in these terms. KONICA MI-

NOLTA may terminate your license if you fail to comply with these terms.

Upon such termination, you agree to destroy all your copies of the Software.

8. GOVERNING LAW

This Agreement shall be governed by the laws of the country where the de-

livery is made to the original customer.


7/36

Introduction 1

TWAIN Driver 1-4

9. GOVERNMENT END USERS

If you are acquiring the Software on behalf of any unit or agency of the United

States Government, the following provisions apply. Use, duplication or dis-

closure by the Government is subject to restrictions as set forth in the Rights

in Technical Data and Computer Software clause at FAR 252.227-7013, sub-

division (b)(3)(ii) or sub paragraph (c)(1)(ii), as appropriate. Further use, dupli-

cation or disclosure is subject to restrictions to restricted rights software as

set forth in FAR 52.227-19(c)(2).

YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UN-

DERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDI-

TIONS. NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR

REPRESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE

IN THIS AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY

PROPERLY AUTHORISED REPRESENTATIVES OF EACH PARTY. BY IN-

STALLING THIS SOFTWARE, YOU AGREE TO ACCEPT THE TERMS OF

THIS AGREEMENT.


8/36

Introduction 1

TWAIN Driver 1-5

1.3 Trademark acknowledgements

KONICA MINOLTA and KONICA MINOLTA logo are trademarks or registered

trademarks of KONICA MINOLTA HOLDINGS, INC.

Microsoft, Windows, and Windows NT are registered trademarks of Micro-

soft Corporation.

All other company and product names are trademarks or registered trade-

marks of their respective companies.

Copyright 2005 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. All

rights reserved.


9/36

Introduction 1

TWAIN Driver 1-6

1.4 User instructions

For U.S.A. users

FCC part 15-Radio frequency devices

This equipment has been tested and found to comply with the limits for aclass A digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment.

7777 WARNINGAny changes made by the purchaser or user without first contacting the

manufacturer will be subject to penalty under FCC regulations.

% The design and production of this unit conform to FCC regulations, andany changes or modifications must be registered with the FCC and are

subject to FCC control.

7777 CAUTIONInterference to radio communications.

% This equipment generates, uses and can radiate radio frequency ener-

gy and, if not installed and used in accordance with the instructionmanual, may cause harmful interference to radio communications.

% Operation of this equipment in a residential area is likely to cause harm-ful interference in which case the user will be required to correct the in-

terference at his own expense.

% This device must be used with shielded interface cables. The use ofnon-shielded cable is likely to result in interference with radio commu-

nications and is prohibited under FCC rules.


10/36

Introduction 1

TWAIN Driver 1-7

For Canada users

Interference-causing equipment standard (ICES-003 issue 3)

This class A digital apparatus complies with Canadian ICES-003.

Cet appareil numrique de la classe A est conforme la norme NMB-003 du

Canada.

For Europe users

CE Marking (Declaration of conformity)

This product complies with the following EU directives:

89/336/EEC, 73/23/EEC and 93/68/EEC directives.

This declaration is valid for the region of the European Union.

7777 CAUTIONInterference with radio communications.% This device must be used with shielded interface cables. The use of

non-shielded cable is likely to result in interference with radio commu-

nications and is prohibited under EU directives.

For users in countries subject to class B regulations

7777 CAUTIONInterference with radio communications.

% This device must be used with shielded interface cables. The use ofnon-shielded cable is likely to result in interference with radio commu-

nications and is prohibited under CISPR 22 rules and local rules.

For users in countries not subject to class B regulations

7777 WARNINGInterference with radio communications.

% This is a class A product. In a domestic environment, this product maycause radio interference in which case the user may be required to take

adequate measures.

% This device must be used with shielded interface cables. The use of

non-shielded cable is likely to result in interference with radio commu-nications and is prohibited under CISPR 22 rules and local rules.


11/36

Introduction 1

TWAIN Driver 1-8


12/36

Setting up PC scanning 2

TWAIN Driver 2-1

2 Setting up PC scanning

If the enclosed TWAIN driver is installed on the computer, this machine canbe used for to scan documents to a PC.

The following software and hardware system environment is required for PC

scanning:

- OS: Windows 98 SE, Windows Me, Windows 2000, Windows XP, or Win-dows Server 2003

- TWAIN-compatible image-processing software (such as, Adobe Pho-toshop)

- USB V.1.1 (or later version)


13/36

Setting up PC scanning 2

TWAIN Driver 2-2


14/36

Connecting to the machine 3

TWAIN Driver 3-1

3 Connecting to the machine

Connecting to the USB port of the machine

7777 CAUTIONUse of an unshielded cable may result in radio interference.

% Be sure to use a shielded USB cable.

1 Make sure that the machine and the computer to be connected to themachine are turned OFF.

2 Connect one end of the USB cable to the USB port of the machine.This completes the connection.

2

NoteUSB1.1 is only supported on Windows 98 SE, Windows Me, Windows

2000, Windows XP, and Windows Server 2003.

Connect

MachinePC


15/36

Connecting to the machine 3

TWAIN Driver 3-2


16/36

Installing the TWAIN driver 4

TWAIN Driver 4-1

4 Installing the TWAIN driver

This section describes the procedure for installing the TWAIN driver. TheTWAIN driver can be installed by using plug and play.

2

Note

After the TWAIN driver is installed, the installation of the printer driver be-

gins.

4.1 Installation under Windows XP/Server 2003

Installing the TWAIN driver under Windows XP/Server 2003

1 With Windows running, insert the CD-ROM into your computers CD-ROM drive.

2 Turn on the machine.

3 When the machine is ready, connect it to the computer with the USB

cable.The Found New Hardware Wizard dialog box appears.

When using Windows XP (SP2), select do not connect in the Found

New Hardware Wizard dialog box, and then click [Next].

4 Select Install from a list or specific location Advanced, and thenclick [Next].

5 Select Include this location in the search: under Search for the bestdriver in these locations., and then click [Browse].

6 Browse to Driver\(language)\2k_XP on the CD-ROM, and then click[OK].

Select the language you prefer. For example, if you prefer English,

browse to:

Driver\English\2k_XP

7 Click [Next].

The Completing the Found New Hardware Wizard dialog box ap-pears.


17/36


TWAIN Driver 4-2

8 Click [Finish].This completes the installation of the TWAIN driver. The Found New

Hardware Wizard dialog box appears again.

9 Repeat steps 4 through 8 to install the printer driver.

2

Note

To reinstall the TWAIN driver, connect the machine to the computer with

the USB cable, and then perform the installation again as described be-

low.

Reinstalling the TWAIN driver (for Windows XP/Server 2003)

1 In the System Properties dialog box, click the Hardware tab, andthen click [Device Manager].

2 Display the properties for the desired TWAIN device under Imagingdevices in the Device Manager dialog box, click the Driver tab, and

then click [Update Driver].

3 Select Install from a list or specific location (Advanced), and thenclick [Next].

4 Select Dont search. I will choose the driver to install, and then click[Next].

5 Click [Have Disk].

6 Specify the path to the folder containing the driver to be reinstalled. Ifa warning message appears, click [Next] to complete the installation

and restart the computer.


18/36


TWAIN Driver 4-3

4.2 Installation under Windows 2000

Installing the TWAIN driver under Windows 2000



3 When the machine is ready, connect it to the computer with the USBcable.

The Found New Hardware Wizard dialog box appears.

4 Click [Next].

5 Select Search for a suitable driver for my device (recommended) inthe Install Hardware Device Drivers dialog box, and then click [Next].

The Locate Driver Files dialog box appears.

6 Select Specify a location, and click [Next].

7 Click [Browse...] on the next dialog box, browse toDriver\(language)\2k_XP on the CD-ROM, and then click [Open].


browse to: Driver\English\2k_XP

8 Click [OK], and follow the instructions that appear on the screen untilthe Completing the Found New Hardware Wizard dialog box ap-

pears.

9 Click [Finish].This completes the installation of the TWAIN driver. The Found New


10 Repeat steps 4 through 9 to install the printer driver.


19/36


TWAIN Driver 4-4

2

Note



low.

Reinstalling the TWAIN driver (for Windows 2000)

1 In the System Properties dialog box, click the Hardware tab, andthen click [Device Manager].

2 Display the properties for the desired TWAIN device under Imagingdevices in the Device Manager dialog box, click the Driver tab, and

then click [Update Driver].

3 Select Display a list of the known drivers for this device so that Ican choose a specific driver, and then click [Next].





20/36


TWAIN Driver 4-5

4.3 Installation under Windows Me/98 SE

2

Note

When using Windows 98 SE, the USB-compatible device driver must beinstalled before the TWAIN driver is installed. Click [Next] after selecting

the following in the dialog box that appears, and then click [CD-ROM

drive].

Display a list of all the drivers in a specific location, so you can select

the driver you want.

Click [Finish] to begin installing the TWAIN driver.

Installing the TWAIN driver under Windows Me/98 SE



3 When the machine is ready, connect it to the computer with the USBcable.

The Add New Hardware Wizard dialog box appears and installationof the TWAIN driver begins.

4 With Windows Me, select Specify the location of the driver (Ad-vanced).

With Windows 98 SE, click [Next], and then select Search for the best

driver for your device. (Recommended) in the dialog box that ap-

pears.

5 Click [Next].6 Select Specify a location, and then click [Browse].

7 Browse to Driver\(language)\Win9x on the CD-ROM, and then click[OK].


browse to: Driver\English\Win9x

8 Click [Next], and then follow the instructions that appear on the screenuntil you can click [Finish].


21/36


TWAIN Driver 4-6

9 Click [Finish].This completes the installation of the TWAIN driver. The Add New


10 Repeat steps 4 through 9 until the installation is completely finished.

2

Note



low.

Reinstalling the TWAIN driver (for Windows Me/98 SE)

1 In the System Properties dialog box, click the Device Manager tab.

2 Display the properties for the desired TWAIN device under Imagingdevices, click the Driver tab, and then click [Update Driver].

For Windows Me, select Specify the location of the driver (Ad-

vanced), and then click [Next].

3 Select Display a list of all the drivers in a specific location, so youcan select the driver you want, and then click [Next].





22/36

How to scan document 5

TWAIN Driver 5-1

5 How to scan document

5.1 Using the auto document feeder

2

Note

The auto document feeder (ADF) cannot be used when true color or gray

(600 600 dpi) is selected for scan type.

How to scan documents using the auto document feeder

1 Select the PC software program (Imaging, Adobe Photoshop, etc.).This procedure uses Adobe Acrobat 6.0 Professional as an example.

2 Click [File].

3 Point to [Create PDF], and then click [From Scanner].

4 Select the device from the dialog box, specify the desired settings, andthen click [Scan].

5 Adjust any settings necessary.For details, refer to Common settings on page 6-1.

6 Place the document face up on theauto document feeder (ADF).

7 Click [Scan] to begin scanning.


23/36

How to scan document 5

TWAIN Driver 5-2

5.2 Using the original glass

How to scan documents using the original glass

1 Select the PC software program (Imaging, Adobe Photoshop, etc.).This procedure uses Adobe Acrobat 6.0 Professional as an example.

2 Click [File].

3 Click [Create PDF], and then click [From Scanner].

4 Choose the device from the dialog box, then click [Scan].

5 Adjust any settings necessary.

For details, refer to Common settings on page 6-1.

6 Place the document face down onthe original glass.

7 Align the document with the scalemarks across the top and to the left

of the original glass.

8 Click [Scan] to begin scanning.

2Note

Click [Prescan] to display the prescanned image in the Over View Win-

dow, and then check the scanning area settings and the prescanned im-

age.


24/36

Common settings 6

TWAIN Driver 6-1

6 Common settings

6.1 Auto options

1

2

3

4

5

9 10 11

7 8

6

No. Items Settings

1 Original size A4, B5, A5, FLS, Legal, Letter, Half Letter, 16K, CustomFor details, refer to Original size on page 6-2.(Custom is only available for scanning through original glass.)

2 Scan type B/W (default setting), Photo, Gray, True ColorFor details, refer to Scan type on page 6-2.(True color mode is only available for scanning through originalglass.)

3 Resolution 150dpi 150dpi, 300dpi 300dpi (default setting),600dpi 600dpiFor details, refer to Resolution on page 6-2.

4 Scanning mode Auto (default setting), Manual

5 Over view window Shows the prescanned image.

6 Clear Clears the prescanned image.

7 Prescan Prescan an image.(This function is only available for scanning through original glass.)

8 Help See the [Help] file.


25/36

Common settings 6

TWAIN Driver 6-2

Original size

Select the original size from the pull-down list to match the size of document

to be scanned.

2

Note

If the scanned image is larger than the size selected in theOriginal Size

pull-down list, any part of the scanned image larger than the specifiedsize is erased.

If the scanned image is smaller than the size selected in theOriginal Size

pull-down list, the image is scanned at the specified size.

Scan type

The scan type pull-down list contain four options.

- B/W:

Suitable for most text documents.- Photo:

Suitable for photographs.

- Gray:Suitable for scanning black & white photographs and text documents.

- True color:Suitable for very detailed color images

Resolution

The resolution pull-down list contain three options that can be used for dif-ferent purposes.

- 150dpi 150dpi:Normal resolution for text documents containing standard sized text.

- 300dpi 300dpi:Higher resolution for text documents containing small characters or fine

print, such as a newspaper article. This is default setting.

- 600dpi 600dpi:Highest resolution for scanning photographs and other images.

9 Scan Scan an image.

10 About See version information.

11 Close Close scanner dialog.

No. Items Settings


26/36

Common settings 6

TWAIN Driver 6-3

Over view window

The prescanned image is displayed in this window with the scanning area

specified in the Original Size pull-down list indicated by a dotted line.

When the pointer changes to , the scanning area can be changed.

If Custom was selected in the Original Size pull-down list, the scanning

area can be redefined. In addition, when the pointer changes to , the scan-

ning area can be moved.


27/36

Common settings 6

TWAIN Driver 6-4

6.2 Manual options

To enter the enhanced settings, select Manual in the scanning mode.

1

2

3

4 76 85

No. Items Settings

1 Rotation None (default setting), Right 90, Left 90

2 Default Click [Default] to restore all the enhanced settings to their defaultvalues.

3 Brightness/Contrast -100 to 100%

4 Sharp -2 to 3For details, refer to Sharp on page 6-5.

5 Curve Value input from -100 to 100For details, refer to Curves on page 6-5.

6 Level Input levels:Minimum: 0 to 247Gamma: 0.10 to 9.99Maximum: 8 to 255

Output levels:Minimum: 0 to 247Maximum: 8 to 255

2

NoteThe difference between Maximum and Minimum can-

not be smaller than 8.

For details, refer toLevel on page 6-5.


28/36

Common settings 6

TWAIN Driver 6-5

Sharp

This function is used to sharpen the image or blur it for effect.

Curves

This function is used to set the gamma of the image.

This function will allow you to brighten or darken the overview of the imagewithout changing the original resolution.

There are three input controls available:

- The scroll bar- The editing field- Directly dragging the points of the folded or curved lines

Level

This function is used to set the gamma value, increase shadow and highlight

areas, enhance shadow values and reduce highlight values.

Color balance

This function is used to fine-tune the RGB values in shadows, midtones, and

highlights areas.

There are three setting options:

- Cyan-Red- Magenta-Green

- Yellow-Blue

Hue/Saturation

This function is used to set hue and saturation as well as the lightness of the

image.

Hue can be set within the range -180 to 180.

Saturation can be used to adjust the freshness of colors by setting the range

from -100 to 100.

Lightness can be set from -100 to 100.

7 Color balance -100 to 100For details, refer to Color balance on page 6-5.

8 Hue/Saturation Hue: -180 to 180Saturation: -100 to 100

Lightness: -100 to 100For details, refer to Hue/Saturation on page 6-5.

No. Items Settings


29/36

Common settings 6

TWAIN Driver 6-6


30/36

Error message 7

TWAIN Driver 7-1

7 Error message

7.1 Original document jamMessage on the control panel:

Cause Remedy

A paper misfeed occurred in the auto docu-

ment feeder. All misfed paper was not removed from the

auto document feeder.

Open the document feeder cover and the auto

document feeder, and then remove the misfedpaper.


31/36

Error message 7

TWAIN Driver 7-2

To clear a misfeed in the auto document feeder

1 Remove the original document fromthe document feed tray.

2 Open the document feeder coverand gently remove the misfed paper.

3 Open the auto document feeder andgently remove the misfed paper.

4 Close the document feeder cover,then load the document removed in

step 1 into the auto document feeder

again.


32/36

Error message 7

TWAIN Driver 7-3

7.2 Memory full

Message on the control panel:

Cause Remedy

There is not enough memory. Press any key from control panel of the ma-chine.


33/36

Error message 7

TWAIN Driver 7-4

7.3 Communication error

Message on the PC screen:

Cause Remedy

PC or machine system crash during com-munication.

USB cable does not connect properly dur-ing communication.

Turn the machine OFF, then check if theUSB cable is connected properly or not.

After checking the USB cable carefully, turnthe machine ON again.

If you still cannot fix the problem, call yourservice representative.


34/36

Error message 7

TWAIN Driver 7-5

7.4 Scanner busy


Cause Remedy

If TWAIN scanning and copy jobs are beingperformed at the same the time, the machinemay stop in the middle of scanning.

Wait until copy or all scanning is over.


35/36

Error message 7

TWAIN Driver 7-6

7.5 Read data error


Cause Remedy

An error occurred while reading data from themachine while scanning.

Turn the machine OFF, then check if theUSB cable is connected properly or not.

After checking the USB cable carefully, turnthe machine ON again.

If you still cannot fix the problem, call yourservice representative.


36/36

http://konicaminolta.com

twain english

Documents