tunnel lighting 1
DESCRIPTION
tunnel lightingTRANSCRIPT
Emergency sign lighting (Tunnel)
The TMB luminaire provides lighting for emergency exits, and in particular is used in the Mont Blanc tunnel. It has been optimised in order to comply with the environ-mental requirements of tunnels.
The vertically installed TMB luminaires are permanently lit in order to create an easily identifiable «curtain of light». In case of fire, the powerful lateral lighting provided by the TMB floodlights increases the visibility of the emergency exits.
APPLICATIONS
Lighting for emergency areas or exits making them easier to
locate. The TMB floodlight is a recessed floodlight available in
two versions depending on its application:
• Version 1: equipped with a 150 W metal halide lamp with
ceramic arc tube, the TMB is permanently lit in order to pro-
duce a «curtain of light».
• Version 2: equipped with a 300 W halogen lamp producing
on-demand light only in case of fire in order to increase the
visibility of emergency exits.
ADVANTAGES
• Reliability, robustness and a high level of tightness
• Very high protection against corrosion using a specific treat-
ment identical to the one applied to luminaires
DESCRIPTION
The body of the luminaire is made from cast aluminium and
protected with a special paint developed to resist the most
severe conditions encountered in tunnels.
The floodlight includes either a narrow beam reflector in
metallised aluminium (version 1), or an extensive distribution
reflector in anodised aluminium (version 2).
The prismatic protector is made from tempered glass or
polycarbonate and sealed onto the body of the luminaire.
Electricity is supplied through a compression gland made
from synthetic materials that comply with anti-fire standards
(V0 and 0 % halogen).
TMB
Tightness level (*) IP 66
Impact resistance (protector) (**) IK 10 (polycarbonate)IK 06 (glass)
Electrical class (*) I
Fire behaviour (***) V0 0% halogen
Weight 9,3 kg (version 1)5 kg (version 2)
(*) according to standard EN 60598-1 / -2.3(**) according to standard EN 50102(***) according to standard UL 94
Version 1 Version 2
404 mm 254 mm
125 mm 117 mm
Ø 2
48 m
m
TMB
INSTALLATION
The luminaire is installed using two stainless steel mounting
screws situated on either side of the floodlight.
The positioning of the lamp is preset at the factory.
Version 1
150 W metal halide with ceramic arc tube
Prismatic glass (squared pattern)
2600 2080 1560 1040 520
90° - 270°0° - 180°
Version 2
300 W halogen
Prismatic glass (grooved)
2510 2080 1560 1040 520
90 - 2700 - 180
MAINTENANCE
The lamp is accessed by a rapid activation of the two closing
levers situated at the back of the floodlight and by releasing the
electrical terminal.
The optical compartment does not require any maintenance. The
high tightness level does not allow dust or humidity to penetrate
into the floodlight. To maintain the original photometric perform-
ance of the TMB floodlight, it is sufficient to clean the external
surfaces.
ELECTRICAL INSTALLATION
Nominal voltage: 230V / 50Hz
In the version with a metal halide lamp with ceramic arc tube,
the control gear plate is integrated into the floodlight.
PHOTOMETRY
DIMENSIONS
www.schreder.com