tubes catalogue

2GENERAL TERMS AND CONDITIONS

General terms and conditionsDEFINITIONS

The company shall mean Tubes International Sp. z o.o. with registered office at Bystra Street 15a, 61-366Pozna, entered to National Court Register (KRS) kept by District Court in Poznan, VIII Commercial under the number: 0000124055, VAT number: 781-00-46-084, share capital: 115.500 PLN.The customer shall mean a buyer who made an agreement to purchase products from the company (verbal or written agreement).The order shall mean a stated intention to buy specific products or services.The products shall mean the subject of an agreement between the customer and the company.Standard terms of sale of products and services offered by the company are stated in the conditions given below. No other terms will apply unless the parties agreed in writing. The conditions of sale are also available at our website and in all branches of the company.

GENERAL GUIDELINES

Catalogues, brochures, price lists and other publications about products offered by the company areissued only by means of indication and should not be treated as trade offers as stated by the Polish law. Product samples should be treated as trial and display materials. All technical data included in the catalogues, price lists and other advertising materials are approximate only and are not binding unless clearly stated in an agreement. The company owns copyright to all documents. The customer must provide information needed to complete an order successfully. It is customers responsibility to provide details of working conditions in which ordered items will be used, the quantity and the precise name and address of both the purchaser and the delivery point. The acceptation of the conditions of sale when placing the first order means subsequent accepting them at all following orders if the customer maintains regular trade relations with the company.

SALE OPTIONS

Two ways of sale of products and services are available:- direct sale in the company branches,- mail order when the goods are delivered by

forwarders.

PLACING AN ORDER

Placing orders can be done in two ways:- verbally where a signature is a confirmation or in a

written form both during direct sale,- in a written form, by fax or email when using mail

order.

When an order is placed, code numbers and precise names of products must be taken from our latest catalogue. If an order concerns an offer made earlier,

the number of that offer must be included in the order Following the above standards allows for precise and fast completion of an order. The customer is always responsible for giving the correct data both in an order and in documents enclosed in an order. Each time an order is submitted a written confirmation is sent (by fax or email) within 7 days from the date of its submission unless agreed differently. Execution of an order starts either when confirmation is sent or according to the agreements of a contract, but not earlier than before all necessary documents are delivered by the customer and before the payment conditions are met. Delivery date is considered to be reached if the products left the warehouse by the agreed time or the purchaser was acknowledged that the goods are ready to be sent. The delivery date can be postponed by reason of a force majeure. The force majeure is the appearance of obstacles that are not caused by the company and cannot be overcome in any way. The company acknowledges the customer immediately if any of the above happens and tell the expected date of delivery.

DELIVERY

The company is obliged to deliver the products that meet the conditions outlined in the confirmation of an order, which include delivery date, quantity, type of products and price. Any changes made in the delivery conditions require written approval. When the products are passed to the customer from the company warehouse or are taken by a forwarders, all responsibility regarding any gains or burdens connected with the products and danger of its accidental loss or damage are transferred to the customer. Delivery charges are not included in the product prices. The products are delivered by forwarders at the expense of the customer to the address indicated in the customers order. The products delivered by the company remain the property of the company until the payment is made. The company reserves the right to choose a forwarder and to refuse the return of any products that are sent back by the customer without any prior notice.

PAYMENT

Payment options:- by cash or cheque (in case of a mail order, payment

is collected by forwarders),- money transfer within 7 days from the date of an

invoice),- money transfer (within 14 days from the date of an

invoice).Any other conditions of payment are agreed upon individually with a Sales Department Manager. Money transfer is available for customers who have already bought products from the company and provided following:- valid extract from National Court Register (KRS) or

Business Activity Register,- copy of VAT number or REGON statistical number,


the complaint is to be resolved at longer time agreed by both sides. The customer shall be informed about the outcome of the complaint by mail, fax or verbally by an authorized employee of the company or in any other agreed upon way. If a complaint is acknowledged and delivery of defect-free products is agreed, the goods which are the subjectof a complaint should be sent back to the company. If the complaint is resolved in any other way, the company shall repair the defective product. The customers do not have a right to eliminate defects themselves or have someone else repair it at the expense of the company.

FINAL STATEMENTS

We do not allow the cession of rights resulting from any agreement with the company to the third party without the written permission of the company. For an agreement to be completed, the customer has to accepts the right of the company to process personal data for marketing purposes. For issues not settled hereunder Polish law applies.The company shall try to settle all disputes resulting from the agreements between the company and the customer out of court. If the dispute is not settled out of court, a court assigned to the city of Poznan decides.

Owner

- a completed money transfer application (available in our branches and at www.tubes-international.com).

If the customer does not pay on time or exceeds credit limit, execution of orders paid with money transfer will be suspended until all overdue payments are made by the customer.In case of overdue payments, the company has a right to:- demand from the customer to pay interest for default,- withdraw a contract and demand to return products,- suspend order execution,- suspend money transfer orders and withdraw granted

discounts,- suspend all allowances the customer is entitled to

having the customer credit.

PRODUCT QUALITY AND WARRANTY

The company guarantees meeting all technical parame-ters of offered products. These technical parameters are determined by the information outlined in the sale correspondence (enquiry, offer, order, order confirmation). The customer is fully responsible for providing correct and detailed information regarding all technical parameters (working conditions) of ordered products. Proper attests, certificates, letters of conformity or other documents that confirm product quality are provided with the product if such a requirement was stated in the order. There can be additional charge for those documents. The company will not accept liability in the event of product failure caused by mechanical damage, abuse of the products or when incorrect technical parameters of the products were provided by the customer. The company is not responsible for faults resulting from defects not lying in the product itself. In particular it is not responsible for faults resulting from accidental damage or its results, damage done by incorrect handling or storage by the customer or design and implementation mistakes performed by the third party. The warranty shall not apply to defects resulting from incorrect usage or modifications of the products performed by the purchaser or the third party. In case of justified claims in virtue of defects, the company will not accept liability to compensate lost profits, production loss, etc.In case of machines and equipment sold by the company, the warranty conditions are stated in a warranty card.

COMPLAINT PROCESS

Lodging a complain does not entitle the customer to defer payment for the purchased goods or for its part. The company has a right to postpone the performance of provisions of a claim until all overdue payments are settled.The ground to lodge a complaint is an immediate complain in writing to the company. The complaint must include a detailed specification of the defect along with all documents justifying the complaint. We aim to resolve all complaints within 14 days of a receipt. If performance of tests, examination or repair at manufacturer is needed,

General terms and conditions - continuation


How to choose the appropriate hose?Flexible hoses are widely used in all branches of the industry. Appropriate selection means choosing a product suitable for technical specification of certain application along with assurance of safe and faultless performance. For these reasons, we advise to choose the appropriate hose with the help of Sales or Technical Department of TUBES INTERNATIONALThe appropriate hose selection is possible only when we have full information about working conditions of the hose. The customer should provide such information in a written form.

Essential information for the appropriate hose selection:- medium (substance conveyed),- internal diameter,- maximum working pressure,- temperature (inside and outside of the hose),- all other features that may affect hose performance and life such as: vibrations, deformations during work,

exposure for external damage, etc.,- type of hose ends (type of fitting, thread size, type of sealing),- way of assembling the hose fittings (clip, band, clamp),- length of the hose (in case of a hose assembly the complete length of hose along with fittings).

Rules mentioned above also concern appropriate selection of different products such as couplings, valves, fittings, etc.

Information and all technical specifications given in the catalogue were gathered with all possible care. However there is a risk of mistakes. It was not possible to include all information on every product in our offer so please contact our specialists from Sales and Technical Departments for further details.

We reserve the right to change all data given in the catalogue.

Pressure Equipment Directive 97/23/WE

After the accession of Poland into the European Union, an obligation were imposed on pressure equipment producers to conform to Community legislation concerning safety and protection of health. The unification of national legislation of each of the Member States in this respect is the only means of ensuring the free circulation of goods in the internal market. The Pressure Equipment Directive 97/23/WE (PED) of 29 May 1997 is the most important act laying down requirements for the free movement of the pressure equipment including flexible hose assemblies. The Directive lays the rules for classifying the equipment into certain categories, the use of the CE conformity marking, the conditions and procedures for conformity assessment. As far as Poland is concerned, it is Minister of Economy provision of 21 December 2005 on basic requirements for pressure equipment and assemblies composed of several pieces of pressure equipment that implements the resolutions of Directive 97/23/WE. Regulations make a clear division between pressure equipment which demands affixing CE marking and pressure equipment which does not require to be affixed with this marking, however in order to ensure its safe usage it have to be designed and manufactured according to the guidelines of sound engineering practice. The equipment that requires to be CE marked was divided into four categories (I, II, II, IV) taking into account increasing level of danger caused by pressure, state of aggregation and the group of fluid (group 1 - dangerous fluids, group 2 - all other fluids). There are detailed rules for defining pressure equipment categories and sound engineering practice outlined in the regulations. Depending on the category, certain conformity assessment procedures apply which may demand participation of an independent unit, called a notified body.The manufacturer of complete pressure hose assemblies is fully responsible for assuring that the equipment sa-tisfies the requirements of this Directive. It includes proper classification and affixing the CE marking. In order to define the category of pressure equipment and to draw up a written (EU) declaration of conformity, when selecting a complete hose assembly, a customer is obliged to give necessary information on the application of the assembly.These essential details are as follows: nominal diameter (DN), maximum working pressure, concentration and group of fluids - specified type of hazard (very toxic, toxic, health hazardous, caustic, irritant, explosive, oxidizing, highly flammable, flammable, harmful for the environment).TUBES INTERNATIONAL offers pressure hose assemblies classified into I and II category. They are affixed with the CE marking and supplied with a written (EU) declaration of conformity. Flexible hose assemblies below the limits given in the regulations are designed and manufactured in accordance with the sound engineering practice.

5ENQUIRY - INFORMATION CARD Attachment Afor P-4-04

company name: NIP:

post code: city: street:

tel: fax: e-mail:

contact person:

Technical requirements regarding the hose (hose assembly)

internal diameter: working pressure: bar

inside temperature: C ambient temperature: C

medium: (type of substance transferred within the hose) type:

liquidgassteamfood productssolid

classification to 97/23/WE (mark X)::

dangerous - explosive (E)dangerous - extremely flammable (F+)dangerous - highly flammable (F)dangerous - flammable (wt higher than ignition temperature)dangerous - very toxic (T+)dangerous - toxic (T)dangerous - oxidizing (O)otherconcetration: %

additional information: (detailed description)

possible external damage tothe hose, external conditions:

instalation: dynamic / static: (bending during work or lack of it)

additional requirements:

required quality documents:

third party inspections: TDT WDT UDT DNV GL other

end fitting no 1: (type, size, material) end fitting no 2: (type, size, material)

number of assemblies/ complete length (mm): expected delivery time:

space for a drawing of a hose assembly, installation or additional remarks:

product used so far:

prepared by: date, signature:

6Characteristics

General purpose hoses as the name suggest are widely used for: air, water, non-aggressive chemicals, oil and fuel. Some of them are also used for food products. Made of such materials as: PVC, PU, rubber with a spiral, braid or cord reinforcement (for pressure resistance). If PVC hose is chosen for a particular application the drop of pressure in higher temperatures must be taken into consideration!

Fittings for general purpose hoses (see chapter COUPLINGS, VALVES, CLAMPS) must be assembled with the use of ferrules (crimped with the use of crimping machines) clamps and worm drive hose clamps.

Hoses for different applications see in different chapters of INDUSTRIAL HOSES.

INDUSTRIAL HOSES - general purpose

CPUMaterial:Working temp.:

Soft, transparent polyurethane From -30C to +70C(with peaks up to +100C)

General purpose, highly flexible hose used for oils, greases, petroleum products, chemicals, granulates and food substances (according to FDA 21 CFR 175.105 requirements). Designed for no pressure or low pressure applications as well as used for protection.

Characteristics:

code I.D. [mm]O.D. [mm]

bending radius [mm]

standard length

[m]CX-CPU-03 3 6 36 30CX-CPU-05 5 8 48 30CX-CPU-06 6 9 63 30CX-CPU-08 8 11 66 30CX-CPU-10 10 16 96 30CX-CPU-13 13 19 114 30

RPUInternal layer:Reinforcement:External layer:Working temp.:

Transparent polyurethanePolyester-nylon cordTransparent polyurethaneFrom -30C to +70C(with peaks up to +100C)

General purpose, highly flexible hose used for water, air, oils, greases, petroleum products, chemicals, granulates and food products (according to FDA 21 CFR 175.105 requirements).

Characteristics:


working pressure 20C

[bar]

bursting pressure 20C

[bar]

weight [kg/m]

standard length

[m]CX-RPU-06 6,3 11,5 19 60 0,10 30CX-RPU-10 10 16 16 53 0,14 30CX-RPU-13 12,5 18,5 14 35 0,18 30CX-RPU-16 16 23 11 38 0,24 30CX-RPU-19 19 26 9 35 0,28 30CX-RPU-25 25 33 7 28 0,41 30

7INDUSTRIAL HOSES - general purpose

WTZInternal layer:Reinforcement:External layer:Working temp.:

Transparent PVCPolyester cordTransparent PVCFrom -5C to +50C

General purpose, flexible hose. Widely used for household applications, in agriculture and gardening industry. Available as a complete hose assembly (DN10) with the length of 10 or 15 meters with pneumatic plug (DN 7,2) on one end and pneumatic socket (DN 7,2) on the other end.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

standard length

[m]WTZ hose

PR-WTZ-08 8 12,5 15 60 50PR-WTZ-10 10 14,5 10 40 50PR-WTZ-12 12,5 17 12 48 50

WTZ-P hose assemblyPR-WTZ/P-10/10 10 14,5 10 40 10PR-WTZ/P-10/15 10 14,5 10 40 15

General purpose, flexible, delivery hose. It is widely used for compressed air, slightly aggressive chemicals, fluid and semi-fluid food substances such as water, beer, wine, juices, beverages, alcohols up to 28% concentration. Not recommended for food substances containing oil and fat as well as dairy products. In compliance with European Directive 1935/2004 CE (stimulant A, B and C). Safety factor 3:1.

Characteristics:

RAGNO CRInternal layer:Reinforcement:External layer:Working temp.:

Transparent PVCPolyester cordTransparent PVCFrom -5C to +60C



[bar]


[bar]


[bar]

standard length

[m]ME-RAGNO/CR-04 4 10 20 16 12 100ME-RAGNO/CR-05 5 11 20 16 12 100ME-RAGNO/CR-06 6 11 20 16 12 100ME-RAGNO/CR-08 8 13 18 13 9 100ME-RAGNO/CR-10 10 15 18 13 9 100ME-RAGNO/CR-12 12 18 12 9 6 50ME-RAGNO/CR-13 13 19 12 9 6 50ME-RAGNO/CR-16 16 22 10 7 4 50ME-RAGNO/CR-19 19 25 10 7 4 50ME-RAGNO/CR-25 25 32 8 5 3 50ME-RAGNO/CR-32 32 42 8 4 2 50ME-RAGNO/CR-38 38 48 8 4 2 50ME-RAGNO/CR-50 50 62 8 4 2 25


RAGNO N 20-40 BARSUPER RAGNO N 80 BARInternal layer: Reinforcement:

External layer: Working temp.:

PVCPolyester cord (single or doubledepending on a version or on a diameter)PVCUp to +60C

Lightweight, flexible hose designed to transfer compressed air, water or slightly aggressive chemicals. Widely used for compressors or in the agriculture industry to water, dew, irrigate or to splash crops with pesticides or herbicides. External layer is resistant to abrasion and weather conditions.

Characteristics:



[bar]


[bar]

standard length

[m]RAGNO N 20

ME-RAGNO/N20-08 8 13 20 60 100ME-RAGNO/N20-10 10 15 20 60 100ME-RAGNO/N20-13 13 19 20 60 100ME-RAGNO/N20-16 16 23 20 60 100ME-RAGNO/N20-19 19 26 20 60 100ME-RAGNO/N20-25 25 34 20 60 50

RAGNO N 40ME-RAGNO/N40-08 8 14 40 120 100ME-RAGNO/N40-10 10 16 40 120 100ME-RAGNO/N40-13 13 21 40 120 100

RAGNO N 80ME-RAGNO/N80-08 8 15 80 240 100ME-RAGNO/N80-10 10 19 80 240 100ME-RAGNO/N80-13 13 23 80 240 100

RAGNO PUInternal layer 1:Internal layer 2:Reinforcement:External layer:Working temp.:

Abrasive resistant polyurethanePVC + rubber compoundPolyester cordPVC + rubber compoundFrom -15C to +60C

Very lightweight, flexible hose with a small bending radius and kink resistance. External layer ishighly resistant to ozone, fats, oils and slightly aggressive chemicals. Widely used for pneumatic tools, spray guns, painting guns, sandblasting, etc. Suitable for hose reel applications. In compliance with European Directive 1935/2004 CE (stimulant A, B and C).

Characteristics:



[bar]


[bar]

standard length

[m]ME-RAGNO/PU-06 6 10 20 60 100ME-RAGNO/PU-08 8 12 20 60 60ME-RAGNO/PU-10 10 15 20 60 50ME-RAGNO/PU-13 13 19 20 60 30ME-RAGNO/PU-16 16 23 20 60 25


General purpose, flexible, delivery hose. Widely used for water, compressed air, semi-aggressive chemicals, fluid and semi-fluid food substances. Safety factor 3:1.

Characteristics:

RPInternal layer:Reinforcement:External layer:Working temp.:

Transparent PVCPolyester cordBlue or red PVCFrom -20C to +55C

code (red)

code (blue)

I.D. [mm]

O.D. [mm]

working press. 20C

[bar]

bursting press. 20C

[bar]

weight [kg/m]

standard length

[m]CX-RP-06R CX-RP-06BL 6,3 11,5 20 61 0,09 30CX-RP-08R CX-RP-08BL 8 13,5 19 59 0,12 30CX-RP-10R CX-RP-10BL 10 16 16 48 0,15 30CX-RP-12R CX-RP-12BL 12,5 18,5 15 45 0,18 30CX-RP-19R CX-RP-19BL 19 26 13 39 0,31 30

General purpose, flexible, delivery hose used for water, air and slightly aggressive chemicals. Fluorescent external layer provides good visibility in limited lighting conditions. Safety factor 3:1.

Characteristics:

CHANTIERInternal layer:Reinforcement:External layer:Working temp.:

Black PVCPolyester cordOrange PVCFrom -15C to +60C


working press. 20C

[bar]

bursting press. 20C

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]TR-CHANTIER-19 19 25,5 9 27 225 0,29 50

Characteristics: Robust, suction-delivery flexible hose designer to transfer water, semi-aggressive chemicals, pest control products, etc.

ARMORVIN INDUSTRYMaterial:Reinforcement:Working temp.:

Transparent PVCSteel wire helixFrom -5C to +65C

code I.D. [mm]

wall thickness

[mm]

working press. 20C

[bar]

vacuum [bar]

bending radius [mm]

weight [kg/m]

standard length

[m]ME-ARMIND-025 25 3,5 4 0,8 85 0,40 60ME-ARMIND-032 32 3,75 3 0,7 95 0,55 60ME-ARMIND-038 38 3,75 3 0,7 110 0,65 30ME-ARMIND-045 45 4,5 2 0,6 125 0,92 30ME-ARMIND-050 50 4,5 2 0,6 145 1,04 30

10


ARMORVIN PRESS PUInternal layer:Reinforcement:External layer:Working temp.:

Smooth transparent polyurethaneSteel wire helixSmooth transparent polyurethaneFrom -20C to +90C

Lightweight, very flexible suction and delivery hose used for pneumatic and hydraulic applications as well as to transfer chemicals and semi-fluid food substances (in compliance with FDA 21 CFR 177.2600 stimulant E and F). Resistant to oils and hydrocarbons.

Characteristics:

code I.D. [mm]

wall thickness

[mm]

working pressure

20C [bar]

bursting pressure [bar] vacuum

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]20C 70C

ME-ARMPREPU-05 5 2,5 20 130 28 0,9 20 0,08 60ME-ARMPREPU-06 6 2,5 20 125 26 0,9 23 0,10 60ME-ARMPREPU-08 8 2,7 18 110 24 0,9 32 0,14 60ME-ARMPREPU-09 9,5 3 18 105 23 0,9 38 0,17 60ME-ARMPREPU-10 10 3 17 100 23 0,9 40 0,18 60ME-ARMPREPU-12 12 3 16 85 21 0,9 45 0,21 60ME-ARMPREPU-13 13 3,1 15 80 20 0,9 50 0,23 60ME-ARMPREPU-14 14 3,2 14 78 19 0,9 56 0,26 60ME-ARMPREPU-16 16 3,5 14 75 18 0,9 63 0,29 60ME-ARMPREPU-18 18 3,5 12 73 17 0,9 70 0,34 60ME-ARMPREPU-19 19 3,5 12 72 17 0,9 76 0,35 60ME-ARMPREPU-20 20 3,5 12 70 16 0,9 80 0,37 60

ARMORVIN PU OILInternal layer:Reinforcement:External layer:Working temp.:

Smooth transparent polyurethaneSteel wire helixGreen transparent PVCFrom -20C to +90C

Flexible hose designed to transfer food substances especially with fat or oil (e.g. olive oil) contents. In compliance with European Directive 1935/2004 CE (stimulant D). Widely used also for industrial oil, semi-aggressive chemicals and abrasive materials.

Characteristics:

code I.D. [mm]

wall thickness

[mm]

working press. 20C

[bar]

vacuum [bar]

bending radius [mm]

weight [kg/m]

standard length

[m]ME- ARMPUOIL-020 20 4,0 5 0,8 80 0,40 30ME- ARMPUOIL-025 25 4,2 5 0,8 100 0,52 30ME- ARMPUOIL-030 30 4,5 4 0,8 120 0,60 30ME- ARMPUOIL-040 40 4,8 4 0,8 160 0,95 30ME- ARMPUOIL-050 50 5,1 4 0,8 200 1,30 30ME- ARMPUOIL-060 60 7 3 0,8 240 1,75 30ME- ARMPUOIL-080 80 6,7 3 0,7 320 2,40 30ME- ARMPUOIL-100 100 7,5 2 0,7 400 3,70 30

11

Characteristics: Lightweight, very flexible suction and delivery hose used for pneumatic, hydraulic applications as well as abrasive materials transfer. Resistant to oils and hydrocarbons.

ARMOFLEX PUInternal layer:Reinforcement:External layer:Working temp.:

Smooth, transparent polyurethaneSteel helix wireSmooth, transparent PVCFrom -20C to +80C


VACUPRESS SUPERELASTICInternal layer:Reinforcement:External layer:Working temp.:

White PVCSteel helix wire, polyester cordBlack PVCFrom -25C to +60C

Flexible suction-delivery hose designed to transfer dry foods, food substances such as water, beer, wine, alcohols up to 28% concentration, juices, beverages. Not recommended for food substances containing oil and fat as well as dairy products. In compliance with European Directive 1935/2004 CE (stimulant A, B and C). Widely used in industrial applications as well as for loading and unloading of tank trucks. Remains very flexible even at low temperatures. Smooth internal layer improves cleaning maintenance and loading/unloading performance and time by 20%. It is resistant to weather conditions and abrasion (according to DIN 53516 : mm3

12

Characteristics: Lightweight, flexible suction-delivery hose designer to transfer water, Beer, wine, alcohols up to 28% concentration, juices, beverages and slightly aggressive chemicals Not recommended for food substances containing oil and fat as well as dairy products. In compliance with European Directive 1935/2004 CE (stimulant A, B and C).

Material:Reinforcement:Working temp.:

Transparent PVCRigid PVC spiralFrom -5C to +60C

FLORIDA


code I.D. [mm]

wall thickness

[mm]

working press. 20C

[bar]

vacuum [bar]

bending radius [mm]

weight [kg/m]

standard length

[m]ME-FLORIDA-20 20 2,4 6,5 0,6 110 0,21 25ME-FLORIDA-25 25 2,4 6,5 0,6 140 0,25 25ME-FLORIDA-30 30 2,5 6 0,6 175 0,33 25ME-FLORIDA-32 32 2,6 6 0,6 180 0,35 25ME-FLORIDA-35 35 2,7 6 0,6 195 0,40 25ME-FLORIDA-38 38 2,8 6 0,6 210 0,43 25ME-FLORIDA-40 40 3,0 5,5 0,6 220 0,48 25ME-FLORIDA-45 45 3,5 5,5 0,6 255 0,64 25ME-FLORIDA-50 50 4,0 5,5 0,6 275 0,76 25ME-FLORIDA-55 55 4,3 5,5 0,6 310 0,86 25ME-FLORIDA-60 60 4,3 4 0,6 330 0,90 25ME-FLORIDA-63 63 4,1 4 0,6 350 0,97 25ME-FLORIDA-70 70 4,5 3 0,6 450 1,13 25ME-FLORIDA-75 75 4,7 3 0,6 500 1,20 25ME-FLORIDA-80 80 4,7 3 0,6 550 1,45 25

Characteristics: Lightweight, very flexible, suction-delivery hose designed to transfer water, slightly aggressive chemicals, pest control products, etc.

Material:Reinforcement:Working temp.:

Transparent PVCRigid PVC spiralFrom -25C to +55C

LUISIANA SUPERELASTIC

code I.D. [mm]

wall thickness

[mm]

working press. 20C

[bar]

vacuum [bar]

bending radius [mm]

weight [kg/m]

standard length

[m]ME-LUISIASE-020 20 3,1 6,5 0,7 65 0,28 50ME-LUISIASE-025 25 3,3 6,5 0,7 100 0,33 50ME-LUISIASE-030 30 3,5 5,5 0,7 125 0,42 50ME-LUISIASE-032 32 3,6 5,5 0,7 135 0,46 50ME-LUISIASE-035 35 3,4 5 0,7 145 0,50 50ME-LUISIASE-038 38 3,7 4,5 0,7 155 0,55 50ME-LUISIASE-040 40 3,8 4,5 0,7 160 0,61 50ME-LUISIASE-045 45 3,7 4 0,7 180 0,67 50ME-LUISIASE-050 50 4,1 3,5 0,7 200 0,81 50ME-LUISIASE-060 60 4,5 3,5 0,7 245 0,97 50ME-LUISIASE-063 63 4,0 3,5 0,7 260 1,04 50ME-LUISIASE-076 76 5,2 2,5 0,7 315 1,38 50ME-LUISIASE-102 102 6,2 2,5 0,7 430 2,20 25ME-LUISIASE-127 127 6,3 2 0,5 670 3,13 25ME-LUISIASE-152 152 7,2 2 0,5 750 4,25 25

13


Characteristics: Flexible hose used for washing applications (cold and hot water) and slightly aggressive chemicals. External layer is resistant to animal and vegetable fats. Recommended for food industry. In compliance with European Directive 1935/2004 CE and 2007/19/CE (stimulant A, B and C). Fittings and ferrules should be assembled after the hose is heated for 30 seconds in hot water (+60C). To be used with hydraulic fittings (TI-Z) crimped with ferrules or fittings assembled on the hose with the use of safety clamps (that are to be tightened during first use in elevated temperature).

THERMOCLEAN AL 20Internal layer:Reinforcement:External layer:Working temp.:

White, smooth PVCSynthetic cordBlue, smooth PVCFrom -15C to +70C


working pressure

20C/70C [bar]

bursting pressure

20C/70C [bar]

bending radius [mm]

weight [kg/m]

standard length

[m]

TR-THERMOAL20-12 12 20 33/20 100/60 108 0,26 25TR-THERMOAL20-16 16 24 33/20 100/60 144 0,32 25TR-THERMOAL20-19 19 28 33/20 100/60 171 0,43 25

General purpose hose designed to transfer air, water and other fluids. Five layer constructionensures high resistance to sudden temperature changes, cyclic pressure and deformation. Chemical resistance to certain acids, bases, bleach and sea water combined with other pro-perties of THERMOSOFT hose makes it a new alternative to several types of rubber hoses. To be used with hydraulic fittings (TI-Z) crimped with ferrules or fittings assembled on the hose with the use of safety clamps (that are to be tightened during first use in elevated temperature). Safety factor 3:1.

Characteristics:

THERMOSOFTInternal layer:Reinforcement:External layer:Working temp.:

Black PVCTextile braidYellow PVCFrom -20C to +100C(with peaks up to +120C)


working press. 20C

[bar]

working press. 100C

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]TR-THERMOSOFT-13 13 22 30 15 75 0,31 25TR-THERMOSOFT-16 16 25 30 15 90 0,36 25TR-THERMOSOFT-19 19 28 30 15 105 0,41 25TR-THERMOSOFT-25 25 34 30 15 130 0,51 25

14


Characteristics: Flexible hose used for washing applications (cold and hot water) and slightly aggressive chemicals. External layer is resistant to animal and vegetable fats. Recommended for food industry. In compliance with European Directive 1935/2004 CE and 2007/19/CE (stimulant A, B and C). To be used with crimped THERMOCLEAN fittings.

THERMOCLEAN 100Internal layer:Reinforcement:External layer:Working temp.:

White, smooth PVCPolyester cordBlue, smooth PVCFrom -15C to +100C(with peaks up to +120C)

Characteristics: Flexible hose used for washing applications (cold and hot water) and slightly aggressive chemicals. External layer is resistant to animal and vegetable fats. Recommended for food industry. In compliance with European Directive 1935/2004 CE and 2007/19/CE (stimulant A, B and C). To be used with crimped THERMOCLEAN fittings.

THERMOCLEAN 40Internal layer:Reinforcement:External layer:Working temp.:

Grey, smooth PVC Double polyester cordBlue, smooth PVCFrom -10C to +70C(with peaks up to + 80C)


working pressure

20C/70C [bar]

bursting pressure

20C/70C [bar]

bending radius [mm]

weight [kg/m]

standard length

[m]

TR-THERMO40-12 12 22 80/40 240/120 84 0,33 50


working pressure

20C/100C [bar]

bursting pressure

20C/100C [bar]

bending radius [mm]

weight [kg/m]

standard length

[m]

TR-THERMO100-013 13 22 30/15 90/45 80 0,31 40TR-THERMO100-016 16 25 30/15 90/45 95 0,36 40TR-THERMO100-019 19 28 30/15 90/45 115 0,41 40TR-THERMO100-025 25 34 26/13 78/39 150 0,52 40

For THERMOCLEAN hoses we can use hydraulic fittings (TI-Z) along with industrial ferrules (TI-L) or special fittings (hygienic finish) with integrated ferule made of AISI 304. Fittings with different threads, material or for different diameters are also available.

Fittings for THERMOCLEAN hoses

code BSP thread size [inch]hose I.D.

[mm]TR-THERMO-12-BZ140-08SS 1/2 12 13

15

WINGFOOT 300Internal layer:Reinforcement:External layer:

Working temp.:

Black NBR rubberSynthetic cordBlue rubber compoundChemivic (NBR + vinyl)From -30C to +90C

Top grade (flexible, non-staining, kink and torsion resistant), general purpose hose used for a wide range of industrial applications such as: air, hot and cold water, oil, hydraulic fluids, slightly aggressive chemicals, diluted acids, cleaning fluids. External layer resistant to oil, ageing and ozone. Low elongation and high dimensional stability make the hose specially suited for hose reels. Nonconductive (R > 1 M/m at 1000 V DC).

Characteristics:


bending radius [mm]

working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]GY-WINGB300-10 9,5 17,5 95 20 80 0,28 152,5GY-WINGB300-13 12,7 21,8 130 20 80 0,39 152,5GY-WINGB300-16 15,9 25,9 160 20 80 0,49 152,5GY-WINGB300-19 19,1 30,2 190 20 80 0,63 152,5GY-WINGB300-25 25,4 38, 255 20 80 0,92 137,3


NIPLAFLEXInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth NBR/PVC compoundSynthetic cordBlack, smooth NBR/PVC compoundFrom -20C to +70C

General purpose, highly flexible hose used for water, air, oil, petrol, grease, many chemicals, pesticides, etc. Non-staining external layer resistant to ageing and ozone.

Characteristics:

code I.D. [mm]

wall thickness

[mm]

O.D. [mm]

working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]BG-3240006000 6 3 12 25 75 0,11 100BG-3240008000 8 3,5 15 25 75 0,17 100BG-3240009000 9 3,5 16 25 75 0,19 100BG-3240010000 10 3,5 17 25 75 0,20 100BG-3240013000 13 4 21 25 75 0,28 100BG-3240019000 19 4,5 28 25 75 0,44 50

16


PLICORD ARCTIC ORTACTMInternal layer:Reinforcement:External layer:Working temp.:

ECO black rubberTwo synthetic cords Blue neoprene rubberFrom -55C to +80C

General purpose delivery hose designer to transfer air, petrochemical products, chemical products at low temperatures.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]GY-PLICORDAO-25 25,4 39,1 20 80 0,87 30,5GY-PLICORDAO-32 31,8 45,3 20 80 1,04 30,5GY-PLICORDAO-35 34,9 50,6 20 80 1,30 30,5GY-PLICORDAO-38 38,1 53,6 20 80 1,41 30,5GY-PLICORDAO-51 50,8 67,4 20 80 1,86 30,5

GORILLAInternal layer:Reinforcement:

External layer:

Working temp.:

Black NBR rubberAramid fibre braid(synthetic braid for 2)Special yellow Carbryn(C-NBR) rubberFrom -30C to +90C

Top grade, highly flexible (with kink and torsion resistance) general purpose hose. Internal layer suitable for oil, fat, bases, air, kerosene, cold and hot water. External layer has excellent abrasion resistance and good resistance to animal fat and oil. External layer flame resistance meets MSHA 2G-14C/14 standards. High tensile strength and dimensional stability make the hose particularly suitable for hose reels. Nonconductive (R > 1 M/m at 1000 V DC). Safety factor 4:1.

Characteristics:


bending radius [mm]

working pressure

[bar]

weight [kg/m]

standard length

[m]GY-GORILLA-06 6,4 15,5 65 35 0,25 152,5GY-GORILLA-08 7,9 17,5 80 35 0,30 152,5GY-GORILLA-10 9,5 18,6 95 35 0,33 152,5GY-GORILLA-13 12,7 22,6 130 35 0,42 152,5GY-GORILLA-16 15,9 26,9 160 35 0,52 152,5GY-GORILLA-19 19,1 30,2 190 35 0,61 152,5GY-GORILLA-25 25,4 37,8 255 35 0,86 137,3GY-GORILLA-32 31,8 45,6 320 35 1,18 122GY-GORILLA-38 38,1 51,8 380 35 1,27 91,5GY-GORILLA-51 50,8 66,6 510 35 1,76 152,5

17

TUBANO OILMaterial:Working temp.:

Nitrile and polychloroprene rubberFrom -40C to +125C

Hose used for cooling and heating installations, water, some acids and diluted alkalis. Resistant to high temperatures and ozone but with limited chemical resistance. Supplied in 1 m pieces to enable easy cutting and fitting into an installation.

Characteristics:


code I.D. [mm]extensibility

[mm]

bending radius [mm]

working pressure

[bar]

standard length

[m]EC-102111 20 20,0 25,0 70 1,5 1EC-102112 25 25,0 31,0 85 1,5 1EC-102113 31,5 31,5 36,0 105 1,5 1EC-102114 33,5 33,5 38,0 110 1,5 1EC-102115 37 37,0 44,0 115 1,5 1EC-102116 44 44,0 48,0 120 1,5 1EC-102117 48 48,0 55,0 125 1,5 1EC-102118 55 55,0 65,0 130 1,5 1EC-102119 65 65,0 75,0 140 1,5 1

INSTA-GRIPTM 300Internal layer:

Reinforcement:External layer:Working temp.:

Black synthetic ChemivicTM rubber(NBR + vinyl)Sythetic cordBlack synthetic rubberFrom -40C to +90C

General purpose delivery hose designed for pneumatic and hydraulic applications. Widely used in automotive industry (no silicone used during hose production External layer has excellent abrasion, weather condition and oil resistance. External layer flame resistance meets MSHA 2G-14C/14 standards. Nonconductive (R > 1 M/m at 1000 V DC). Safety factor 4:1. Hose designed for use For use with push-on fittings.

Characteristics:


bending radius [mm]

working pressure

[bar]

weight [kg/m]

standard length

[m]GY-INSTAGRIP300-06 6,4 13,7 65 20 0,13 152,5GY-INSTAGRIP300-08 7,9 15,7 75 20 0,18 152,5GY-INSTAGRIP300-10 9,5 17,5 75 20 0,21 152,5GY-INSTAGRIP300-13 12,7 20,6 130 20 0,25 152,5GY-INSTAGRIP300-16 15,9 23,6 150 20 0,30 152,5GY-INSTAGRIP300-19 19,1 27,2 180 20 0,39 152,5

18

INDUSTRIAL HOSES - air and water

Characteristics

Hoses for air and water designed for industrial water, sewage, cooling water, washdown, compressed air (compressors, pneumatic tools, hose reels) and some for food products. Made of rubber, PVC, polyethylene with textile braid, PVC or steel wire helix. Apart from general purpose hoses in this group we distinguish hoses for:

- cooling installations in steel mills,- fire equipment,- portable toilets,- car and rail brake systems,- cooling systems in cars,- motor and pleasure boats,- snow cannons,- hot air in tank trucks.

Fittings for air and water hoses (see chapter COUPLINGS, VALVES, CLAMPS) can be mounted with worm drive clamps, safety clamps or crimped.

For air and water hoses see also: food hoses , steel hoses, PTFE hoses, TYGON, or chapters: HIGH PRESSURE and PNEUMATICS.

General purpose flexible delivery hose. Double external layer and a strong textile knitted braid ensure better tensile strength.External layer resistant to abrasion and UV radiation. Due to its construction recommended for irrigation systems in agriculture, gardening and construction industry.

Characteristics:

TRICOFLEXInternal layer:Reinforcement:External layer:Working temp.:

Two layers of black PVCStrong textile braidYellow PVCFrom -15C to +60C


working pressure

[bar]

bursting pressure

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]TR-TRICOFLEX-13 12,5 18 10 25 125 0,14 50TR-TRICOFLEX-15 15 20,5 10 25 135 0,18 50TR-TRICOFLEX-19 19 25,5 9,2 23 180 0,26 50TR-TRICOFLEX-25 25 32,5 8 20 240 0,44 50TR-TRICOFLEX-30 30 39 8 20 300 0,64 50TR-TRICOFLEX-35 35 45 8 20 350 0,82 50TR-TRICOFLEX-40 40 51 8 20 400 1,03 50TR-TRICOFLEX-50 50 63 8 20 500 1,51 50

19


VACUPRESS FLEXInternal layer:Reinforcement:External layer:Working temp.:

Black plasticized PVCSteel wire helix, polyester yarnBlack plasticized PVCFrom -25C to +60C

Highly flexible, lightweight, suction-delivery hose designed to transfer dry materials, water, sewage, mud. Widely used in irrigation systems, loading and unloading of tank trucks, industrial plant engineering, etc. Remains very flexible even at low temperatures. Smooth internal and external layer facilitate maintaining highest hygiene standards and increase reloading rate by 20%. Resistant to weather conditions and abrasion (according to DIN 53516: 150 mm3). Available in straight (not bent) lengths from 3 to 6 meters.

Characteristics:

code O.D. [mm]O.D. [mm]

bending radius [mm]

working press. 20C

[bar]

bursting press. 20C

[bar]

vacuum [bar]

weight [kg/m]

standard length

[m]ME-VACUPRFX-050 50 63 150 12 36 0,9 1,60 30ME-VACUPRFX-060 60 74 180 12 36 0,9 2,00 30ME-VACUPRFX-076 76 92 210 12 36 0,9 2,90 30ME-VACUPRFX-080 80 96 220 10 30 0,9 2,95 30ME-VACUPRFX-090 90 107 250 10 30 0,9 3,50 30ME-VACUPRFX-102 102 119 300 10 30 0,9 4,00 30ME-VACUPRFX-120 120 138 350 8 24 0,9 5,30 20ME-VACUPRFX-127 127 145 370 7 21 0,9 5,80 20ME-VACUPRFX-152 152 171 480 5 15 0,9 6,85 20

Characteristics: Hose designed for water and non-corrosive fluids. Widely used in sanitary systems, boilers and cooling systems. Two red stripes in the braid of the hose indicate the resistance to high fluid temperature.

ZINCOFLEX - CInternal layer:Reinforcement:Working temp.:

Non-toxic EPDM rubberGalvanised steel braidFrom -10C to +100C


working pressure

[bar]

bursting pressure

[bar]

bending radius [mm]

standard length

[m]RK-ZCF/C-06 6 9 15 60 20 50RK-ZCF/C-10 10 13,2 15 60 40 50RK-ZCF/C-13 13 18 15 60 60 50RK-ZCF/C-19 19 25 10 40 80 50RK-ZCF/C-25 25 32 10 40 100 50RK-ZCF/C-32 32 41 10 40 160 50RK-ZCF/C-40 40 51 6 24 180 50RK-ZCF/C-50 50 62 6 24 230 50

20


Flexible hose assembly designed to sanitary systems (hot and cold water). Widely used in industrial installations, central heating and air-conditioning. Resistant to glycol (concentration to 35%). Available with brass fitting and stainless steel (AISI 304) ferrules. Hose assemblies with different thread types and lengths available on request.

Characteristics:

WS - STWS - GIInternal layer:

Reinforcement:Working temp.:

Black, smooth EPDM rubber(with increased parameters)External AISI 304 braidTo +110C


working pressure

[bar]

thread 1

[inch]

thread 2

[inch]

flow max. * [l/min.]

length [mm]

VO-ST-06DP-06DP/020

8 13

16

3/8 female

3/8 female

29

200VO-ST-06DP-06DP/040 400VO-ST-06DP-06DP/060 600VO-ST-06DP-06DP/080 800VO-ST-06DP-06DP/100 1000VO-ST-08DP-08DP/020

1/2 female

1/2 female

200VO-ST-08DP-08DP/040 400VO-ST-08DP-08DP/060 600VO-ST-08DP-08DP/080 800VO-ST-08DP-08DP/100 1000VO-GI-08DP-08DP/030

12 20 65

300VO-GI-08DP-08DP/040 400VO-GI-08DP-08DP/050 500VO-GI-08DP-08MP/030

1/2 male

300VO-GI-08DP-08MP/040 400VO-GI-08DP-08MP/050 500VO-GI-12DP-12DP/030

3/4 female

3/4 female

300VO-GI-12DP-12DP/040 400VO-GI-12DP-12DP/050 500VO-GI-12DP-12MP/030

3/4 male

300VO-GI-12DP-12MP/040 400VO-GI-12DP-12MP/050 500

* - at 3 bar working pressure

21


TUBES 2116 TInternal layer:Reinforcement:External layer:Working temp.:

White, smooth EPDM rubberPolyester cordRed or blue, smooth EPDM rubberFrom -40C to +100C

General purpose industrial hose designed to air and water transfer. Widely used in hot water washdown applications to clean floors and equipment. Suitable for outdoor usage. Resistant to weather conditions and abrasion.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]TUBES 2116 T (red external layer)

PR-TU2116T-13R 13 23 10 40 152 0,44 100PR-TU2116T-16R 16 28 10 40 191 0,63 100PR-TU2116T-19R 19 32 10 40 228 0,79 100PR-TU2116T-25R 25 39 10 40 305 1,041 100

TUBES 2116 T (blue external layer)PR-TU2116T-13BL 13 23 10 40 152 0,44 100PR-TU2116T-16BL 16 28 10 40 191 0,63 100PR-TU2116T-19BL 19 32 10 40 228 0,79 100PR-TU2116T-25BL 25 39 10 40 305 1,041 100

TUBES 2116Internal layer:Reinforcement:External layer:Working temp.:

Black, smooth EPDM rubberPolyester cordRed, smooth EPDM rubberFrom -40C to +100C

General purpose industrial hose designed to air and water transfer. Widely used in hot water washdown applications to clean floors and equipment. Suitable for outdoor usage. Resistant to wether conditions and abrasion.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]PR-TU2116-13 13 21 10 40 40 0,27 60PR-TU2116-16 16 26 10 40 60 0,41 60PR-TU2116-19 19 28,5 10 40 90 0,45 60PR-TU2116-25 25 35 10 40 120 0,60 40

22

SPECTRATM 300Internal layer:Reinforcement:External layer:Working temp.:

Black, smooth NBR rubberSynthetic cordWhite ChemivicTM synthetic rubberFrom -30C to +93C

Delivery hose designed to hot water washdown applications to clean floors and equipment in food processing plants, dairies, packing houses, bottling plants, breweries, canneries, etc. Safety factor 4:1.

Characteristics:


bending radius [mm]

working pressure

[bar]

weight [kg/m]

standard length

[m]GY-SPECTRA300-13 12,7 23,1 125 20 0,40 152,5GY-SPECTRA300-19 19,1 30 190 20 0,60 152,5GY-SPECTRA300-25 25,4 38,1 250 18 0,89 137,3

FORTRESS 300Internal layer:Reinforcement:External layer:

Working temp.:

Black NBR rubber compoundSynthetic cordBlue Carbryn rubber protectedby Microban coverFrom -30C to +93C

High-quality, flexible, non-staining, kink and torsion resistant hose. Widely used for washdown applications in food processing plants, dairies, packing houses, bottling plants, breweries, canneries due to Microban antimicrobial external protection layer that inhibits the growth of bacteria, mold, and fungi. In compliance with ISO 1307.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]GY-FORT300-13 12,9 22,8 20 80 0,43 152,5GY-FORT300-16 15,9 27 20 80 0,54 152,5GY-FORT300-19 19,1 30,2 20 80 0,61 152,5


23


Working temp.:


High-quality, flexible, non-staining, kink and torsion resistant hose. Widely used for washdown applications in food, pharmaceutical and cosmetic industry due to Microban antimicrobial external protection layer that inhibits the growth of bacteria, mold, and fungi. In compliance with ISO 1307. Use with hydraulic fittings (TI-Z) crimped with appropriate ferules.

Characteristics:


Working temp.:


High-quality, flexible, non-staining, kink and torsion resistant hose. Widely used for washdown applications in food, pharmaceutical and cosmetic industry due to Microban antimicrobial external protection layer that inhibits the growth of bacteria, mold, and fungi. In compliance with ISO 1307. Use with hydraulic fittings (TI-Z) crimped with appropriate ferules.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]GY-FORT1000-10 9,5 19,1 69 276 0,27 152,5GY-FORT1000-13 12,7 21,8 69 276 0,30 152,5GY-FORT1000-19 19,1 30,5 69 276 0,63 152,5


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]GY-FORT3000-06 6,4 13,5 207 828 0,22 152,5GY-FORT3000-10 9,5 17,5 207 828 0,36 152,5GY-FORT3000-13 12,7 20,8 207 828 0,48 152,5


24

Characteristics: Industrial hose designed to washdown application to clean floors and equipment in e.g. meat, food and dairy industries. Suitable for outdoor usage. Resistant to weather conditions and abrasion.

MICHIGANInternal layer:Reinforcement:External layer:Working temp.:

White, smooth SBR rubberSynthetic cordWhite EPDM rubberFrom -40C to +80C


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]IV-MICHIGAN-013 13 20 10 30 0,24 120IV-MICHIGAN-016 16 24 10 30 0,31 120IV-MICHIGAN-019 19 26 10 30 0,29 120IV-MICHIGAN-025 25 34 10 30 0,54 120IV-MICHIGAN-032 32 46 10 30 1,10 120IV-MICHIGAN-038 38 54 10 30 1,44 120


Characteristics: Softwall hose designed for hot water, low temperature steam, condensation water. Widely used in humidifiers as well as in air conditioning installations.

CONDITIONERInternal layer:Reinforcement:External layer:Working temp.:

White, smooth butyl rubberSynthetic cordWhite butyl rubberFrom -30C to +110C


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]IV-CONDITIONER-22 22 32 1 40 0,49 120IV-CONDITIONER-30 30 40 1 40 0,64 120

25

OSLO 10Internal layer:

Reinforcement:External layer:Working temp.:

Black, smooth EPDM rubber(110 x 118 - SBR rubber)Synthetic cordBlack, smooth EPDM rubberFrom -25C to +70C (EPDM)From -30C to +80C (SBR)

Delivery hose designed for the most severe working conditions. Widely used for water transfer, irrigation and draining systems, sewer cleaning, etc. Resistant to abrasion and weather conditions.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]IV-OSLO/10-032 32 38 10 30 0,55 120IV-OSLO/10-038 38 45 10 30 0,64 120IV-OSLO/10-051 51 58 10 30 0,72 120IV-OSLO/10-063 63,5 70 10 30 0,78 120IV-OSLO/10-076 76 83 10 30 1,00 120IV-OSLO/10-090 90 98 10 30 1,24 120IV-OSLO/10-102 102 110 10 30 1,53 120IV-OSLO/10-110 110 118 10 30 1,72 120IV-OSLO/10-127 127 135 10 30 1,93 120IV-OSLO/10-152 152 160 10 30 2,30 120IV-OSLO/10-203 203 215,5 10 30 4,54 120IV-OSLO/10-254 254 270 10 30 7,82 120


TORONTO LIGHTInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth synthetic rubberSynthetic cord and steel helix wireBlack, synthetic rubberFrom -30C to +70C

Suction and delivery hose designed to transfer industrial water, sewage, mud, drainage, etc. Resistance to kinking and a strong construction makes it suitable for heavy-duty applications. Vacuum 0,9 bar.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]IV-TORONTO/L-019 19 27 10 30 100 0,44 120IV-TORONTO/L-025 25 33 10 30 125 0,53 120IV-TORONTO/L-032 32 40 10 30 160 0,71 120IV-TORONTO/L-038 38 47,5 10 30 190 0,92 120IV-TORONTO/L-040 40 49,5 10 30 200 0,96 120IV-TORONTO/L-051 51 60,5 10 30 255 1,24 120IV-TORONTO/L-063 63,5 75 10 30 380 1,94 120IV-TORONTO/L-076 76 87 10 30 455 2,13 120IV-TORONTO/L-102 102 114 10 30 610 3,18 120IV-TORONTO/L-110 110 125 10 30 660 3,97 120IV-TORONTO/L-127 127 143 10 30 700 7,17 120IV-TORONTO/L-152 152 170,5 10 30 1000 10,30 120IV-TORONTO/L-203 203 225 10 30 1200 12,17 60IV-TORONTO/L-254 254 278 5 15 1530 22,95 12

26

FIRE CHICAGOInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth EPDM rubberSynthetic cordBlack, smooth EPDM rubberFrom -40C to +100C

Robust, flexible hose designed for water delivery and suitable for hose reels. Widely used for high pressure fire extinguishing equipment. External layer is resistant to fire retardant chemicals, foams, abrasion and weather conditions.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]IV-CHICAGO-19 19 32 40 120 0,57 120IV-CHICAGO-25 25 38 40 120 0,70 120IV-CHICAGO-28 28 44 40 120 0,97 120IV-CHICAGO-32 32 45 40 120 0,85 120IV-CHICAGO-38 38 52 40 120 1,21 120


ANKARAInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth NR/SBR rubberSynthetic cordBlack, smooth SBR rubberFrom -40C to +70C

Robust, flexible hose adjusted to be used on hose reels. It is used for high pressure fire extinguishing equipment. Electrically conductive internal layer is resistant to fire extinguishing powders and foams. External layer resistant to abrasion and weather conditions.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]IV-ANKARA-25 25 37 20 60 0,67 120IV-ANKARA-32 32 46 20 60 0,90 120

27

Characteristics: Delivery hose designed for water. External layer resistant to high temperatures. Widely used in cooling systems. Recommended especially for water installation in metallurgical furnaces.

ESSENInternal layer:Reinforcement:External layer:

Working temp.:

Black, smooth EPDM rubberSynthetic cordWhite EPDM rubber coveredwith vulcanized glass fibre plyFrom -40C to +130C(external layer to +375C)



working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]IV-ESSEN-013 13 23 10 30 0,33 120IV-ESSEN-019 19 31,5 10 30 0,59 120IV-ESSEN-025 25 37 10 30 0,69 120IV-ESSEN-032 32 44 10 30 0,85 120IV-ESSEN-038 38 53 10 30 1,32 120IV-ESSEN-045 45 62 10 30 1,79 120IV-ESSEN-051 51 67,5 10 30 1,89 120IV-ESSEN-063 63,5 80 10 30 2,29 120IV-ESSEN-076 76 96 10 30 3,30 120IV-ESSEN-090 90 110 10 30 3,85 120IV-ESSEN-102 102 124 10 30 4,82 120

Characteristics: Suction-delivery hose designed for water. External layer resistant to high temperatures. Widely used in cooling systems. Recommended especially for water installation in metallurgical furnaces. Vacuum 0,9 bar.

ESSEN / LLInternal layer:Reinforcement:External layer:

Working temp.:

Black, smooth EPDM rubberSynthetic cord, steel helix wireWhite EPDM rubber coveredwith vulcanized glass fibre plyFrom -40C to +130C(external layer to +375C)


working pressure

[bar]

bursting pressure

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]IV-ESSEN/LL-012 12 23 10 30 85 0,46 120IV-ESSEN/LL-019 19 31 10 30 95 0,76 120IV-ESSEN/LL-025 25 37 10 30 115 0,92 120IV-ESSEN/LL-032 32 44 10 30 150 1,09 120IV-ESSEN/LL-038 38 51 10 30 180 1,49 120IV-ESSEN/LL-051 51 64 10 30 245 1,97 120IV-ESSEN/LL-063 65 79 10 30 315 2,76 120IV-ESSEN/LL-076 76 92 10 30 375 3,60 120IV-ESSEN/LL-102 102 120 10 30 530 5,39 120

28


Characteristics: Delivery hose designed for water. External layer resistant to high temperatures. Widely used in cooling systems. Recommended especially for water installation in metallurgical furnaces.

ESSEN 20Internal layer:Reinforcement:External layer:

Working temp.:

White, smooth EPDM rubberSynthetic cordWhite EPDM rubber coveredwith vulcanized glass fibre plyFrom -40C to +130C(external layer to +375C)


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]IV-ESSEN20-013 13 24 20 60 0,35 120IV-ESSEN20-016 16 27 20 60 0,41 120IV-ESSEN20-019 19 31 20 60 0,54 120IV-ESSEN20-025 25 39 20 60 0,85 120IV-ESSEN20-032 32 47 20 60 1,10 120IV-ESSEN20-038 38 55 20 60 1,43 120IV-ESSEN20-051 51 68 20 60 1,85 120IV-ESSEN20-060 60 81 20 60 2,75 120IV-ESSEN20-063 63,5 83 20 60 2,69 120IV-ESSEN20-076 76 94 20 60 2,76 120IV-ESSEN20-090 90 110 20 60 3,65 120IV-ESSEN20-102 102 126 20 60 4,91 120

GEYSER / 20 - BB / FVInternal layer:

Reinforcement:External layer:

Working temp.:

White, smooth, dielectricEPDM rubberSynthetic cordWhite EPDM rubber coveredwith vulcanized glass fibre plyFrom -35C to +120C(external layer to +400C)

Delivery hose designed for cooling water transfer especially in metallurgical furnaces, electrical transformers and electrical transducers. Resistance to heat radiation (to +400C) and splashes of hot metals. Internallayer resistant to electrical brakedown (E> = 5000 V/mm).

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

min. bending radius [mm]

weight [kg/m]

standard length

[m]MT-GEYSER/20-BB/FV-013 13 24 20 60 65 0,44 40MT-GEYSER/20-BB/FV-019 19 32 20 60 95 0,62 40MT-GEYSER/20-BB/FV-025 25 39 20 60 125 0,78 40MT-GEYSER/20-BB/FV-032 32 48 20 60 160 1,05 40MT-GEYSER/20-BB/FV-038 38 55 20 60 190 1,28 40MT-GEYSER/20-BB/FV-050 50 68 20 60 250 1,78 40MT-GEYSER/20-BB/FV-060 60 80 20 60 300 2,50 40MT-GEYSER/20-BB/FV-075 75 95 20 60 380 2,90 40MT-GEYSER/20-BB/FV-080 80 100 20 60 400 3,15 40MT-GEYSER/20-BB/FV-100 100 124 20 60 500 4,90 40

Min bending radius given for 1 bar working pressure.

29

DERBY RADIATORInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth EPDM rubberSynthetic cordBlack EPDM rubberFrom -40C to +120C

Hose designed for heating and cooling systems, automotive pumps and industrial machines.Resistant to cooling fluids and manufactured according to DIN 73411 (1979) standards.

Characteristics:



working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]IV-RADIATOR-008 8 15 4 12 0,14 120IV-RADIATOR-010 10 18 4 12 0,19 120IV-RADIATOR-012 12 19 4 12 0,19 120IV-RADIATOR-013 13 20 4 12 0,21 120IV-RADIATOR-015 15 22 4 12 0,23 120IV-RADIATOR-016 16 23 4 12 0,22 120IV-RADIATOR-018 18 25 4 12 0,27 120IV-RADIATOR-019 19 28 4 12 0,37 120IV-RADIATOR-020 20 27 4 12 0,29 120IV-RADIATOR-022 22 29 4 12 0,32 120IV-RADIATOR-025 25 32 4 12 0,36 120IV-RADIATOR-028 28 36 4 12 0,43 120IV-RADIATOR-030 30 38 4 12 0,46 120IV-RADIATOR-032 32 40 4 12 0,49 120IV-RADIATOR-035 35 43 4 12 0,53 120IV-RADIATOR-038 38 48 4 12 0,77 120IV-RADIATOR-040 40 50 4 12 0,80 120IV-RADIATOR-042 42 52 3 9 0,84 120IV-RADIATOR-045 45 55 3 9 0,89 120IV-RADIATOR-048 48 58 3 9 0,94 120IV-RADIATOR-050 50 60 3 9 0,98 120IV-RADIATOR-055 55 65 3 9 1,07 120IV-RADIATOR-060 60 70 3 9 1,16 120IV-RADIATOR-065 65 75 3 9 1,25 120IV-RADIATOR-070 70 80 3 9 1,33 120IV-RADIATOR-075 75 85 3 9 1,43 120IV-RADIATOR-080 80 91,5 3 9 1,71 120IV-RADIATOR-100 100 112,5 2 6 2,34 120IV-RADIATOR-110 110 122 2 6 2,41 120IV-RADIATOR-114 114 126 2 6 2,50 120

30


RADIATOR / LCLInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth CR rubberSynthetic cord, steel helix wireBlack CR rubberFrom 40C to +100C

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]IV-RADIATOR/LCL-16 16 26 4 12 60 0,42 60IV-RADIATOR/LCL-18 18 26 4 12 65 0,46 60IV-RADIATOR/LCL-20 20 28 4 12 70 0,50 60IV-RADIATOR/LCL-22 22 32 4 12 80 0,51 60IV-RADIATOR/LCL-25 25 35 4 12 85 0,57 60IV-RADIATOR/LCL-28 28 36 4 12 95 0,59 60IV-RADIATOR/LCL-30 30 38 4 12 100 0,63 60IV-RADIATOR/LCL-32 32 42 4 12 105 0,70 60IV-RADIATOR/LCL-35 35 45 4 12 115 0,76 60IV-RADIATOR/LCL-38 38 48 4 12 130 0,82 60IV-RADIATOR/LCL-40 40 50 4 12 135 0,85 60IV-RADIATOR/LCL-42 42 52 4 12 140 0,89 60IV-RADIATOR/LCL-45 45 55 4 12 150 0,95 60IV-RADIATOR/LCL-50 50 60 4 12 165 1,04 60IV-RADIATOR/LCL-51 51 61 4 12 165 1,06 60IV-RADIATOR/LCL-55 55 65 4 12 180 1,13 60IV-RADIATOR/LCL-60 60 72 4 12 200 1,30 60IV-RADIATOR/LCL-70 70 82 3 9 230 1,50 60IV-RADIATOR/LCL-76 76 89 3 9 250 2,10 60IV-RADIATOR/LCL-90 90 102 3 9 300 2,45 60

Suction-delivery square corrugated hose designed to hot water and anti-freeze liquids in cooling automotive systems and industrial vehicle engines. Internal layer resistant to anti-freeze liquids and external layer resistant to oil, heat and ageing. Available in lengths (1 - 2 meter) with soft ends on request.

MINE SPRAYInternal layer:Reinforcement:External layer:Working temp.:

Black NBR rubberSteel braidYellow ChemivicTM rubber From -20C to +90C

Delivery hose designed for underground water spray service in dust control applications. Widely used on continuous mining machinery at the head-face and on other mechanical mining machines. External layer in compliance with MSHA standards. Safety factor 4:1.

Characteristics:


bending radius [mm]

working pressure

[bar]

weight [kg/m]

standard length

[m]GY-MINESPRAY-25 25,4 36,8 200 70 0,94 30,5GY-MINESPRAY-32 31,8 44,5 250 70 1,28 30,5GY-MINESPRAY-38 38,1 50,3 300 70 1,61 30,5GY-MINESPRAY-51 50,8 64,8 400 70 2,34 30,5

31


AUTO SILCAR REDInternal layer:Reinforcement:External layer:Working temp.:

Red, smooth siliconeSynthetic cordRed, smooth siliconeFrom -50C to +180C(with peaks up to +200C)

Delivery hose designed to transfer hot air or hot water mixed with anti-freeze liquids. Widely used in cooling systems of vehicles where resistance to high temperature and oil is required.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

standard length

[m]IV-SILCAR-015 15 22 3 9 40IV-SILCAR-022 22 29 3 9 40IV-SILCAR-025 25 32 3 9 40IV-SILCAR-028 28 35 3 9 40IV-SILCAR-032 32 39 3 9 40IV-SILCAR-038 38 45 3 9 40IV-SILCAR-051 51 58 3 9 40IV-SILCAR-055 55 64 3 9 40IV-SILCAR-105 105 114 3 9 10IV-SILCAR-110 110 121 3 9 10IV-SILCAR-305 305 319 3 9 10IV-SILCAR-320 320 337 3 9 10

AUTO SILCAR RED / LLInternal layer:Reinforcement:External layer:Working temp.:

Red, smooth siliconeSynthetic cord, steel helix wireRed, smooth silicone From -50C to +180C(with peaks up to +200C)

Suction-delivery hose designed to transfer hot air or hot water mixed with anti-freeze liquids. Widely used in cooling systems of vehicles where resistance to high temperature and oil is required.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

vacuum [bar]

bending radius [mm]

standard length

[m]IV-SILCAR/LL-013 13 23,5 3 9 -0,9 80 40IV-SILCAR/LL-025 25 35,5 3 9 -0,9 150 40IV-SILCAR/LL-038 38 48,5 3 9 -0,9 230 40IV-SILCAR/LL-051 51 61,5 3 9 -0,9 300 40

32


BOAT ETNAInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth synthetic rubberSynthetic cord, steel helix wireBlack, corrugated synthetic rubberFrom -30C to +100C

Lightweight and very flexible suction-delivery hose designed to convey wet exhaust fumes in pleasure boats (exhaust of fumes and cooling water). External layer resistant to fire and weather conditions.Lloyds 99/00169 (E2).

Characteristics:

Standards:

code I.D. [mm]

bursting pressure

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]IV-ETNA-032 32 5 130 0,65 60IV-ETNA-038 38 5 150 0,75 60IV-ETNA-040 40 5 160 0,78 60IV-ETNA-045 45 5 170 0,87 60IV-ETNA-051 51 5 180 1,07 60IV-ETNA-058 58 5 190 1,20 60IV-ETNA-063 63,5 5 200 1,30 60IV-ETNA-076 76 5 250 1,46 60IV-ETNA-090 90 5 330 1,73 60IV-ETNA-102 102 5 410 2,06 60IV-ETNA-127 127 5 560 2,58 60IV-ETNA-152 152 5 680 3,18 60IV-ETNA-203 203 5 995 5,52 60

AUTO SILCAR RED / LOInternal layer:Reinforcement:External layer:Working temp.:

Red, smooth siliconeSynthetic cord, steel helix wireRed, corrugated siliconeFrom -50C to +180C(with peaks up to +200C)

Suction-delivery hose designed to transfer hot air or hot water mixed with anti-freeze liquids. Widely used in cooling systems of vehicles where resistance to high temperature and oil is required.

Characteristics:

code I.D. [mm]

working pressure

[bar]

bursting pressure

[bar]

standard length

[m]IV-SILCAR/LO-030 30 3 9 40IV-SILCAR/LO-040 40 3 9 40IV-SILCAR/LO-051 51 3 9 40IV-SILCAR/LO-063 63,5 3 9 10IV-SILCAR/LO-076 76 3 9 10IV-SILCAR/LO-100 100 3 9 10IV-SILCAR/LO-110 110 3 9 10IV-SILCAR/LO-305 305 3 9 10

33


BOAT SANITARYInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth SBR rubberSynthetic cord, steel helix wireWhite SBR rubberFrom -30C to +70C

Hardwall suction-delivery hose used for water supply and sanitary installations. External layer is resistant to abrasion and weather conditions. It is widely used on pleasure boats, ships, yachts etc.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]IV-SANITARY-16 16 27 3 9 65 0,60 120IV-SANITARY-19 19 30 3 9 80 0,66 120IV-SANITARY-25 25 36 3 9 105 0,82 120IV-SANITARY-38 38 49 3 9 165 1,17 120

Characteristics:

Standards:

Lightweight and very flexible suction-delivery hose designed to convey wet exhaust fumes in pleasure boats (exhaust of fumes and cooling water). External layer resistant to fire, abrasion and weather conditions. ISO 13363 type 2A, SAE J 2006:03 type R2, R.I.N.A., Lloyds Register, DNV.

VESUVIO / LLInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth synthetic rubberSynthetic cord, steel helix wireBlack, smooth synthetic rubberFrom -30C to +100C


bursting pressure

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]IV-VESUVIO/LL-020 20 29 2,5 80 0,53 120IV-VESUVIO/LL-025 25 34 2,5 100 0,66 120IV-VESUVIO/LL-030 30 39 2,5 120 0,75 120IV-VESUVIO/LL-035 35 44 2,5 140 0,86 120IV-VESUVIO/LL-038 38 47 2,5 150 0,91 120IV-VESUVIO/LL-040 40 50 2,5 160 1,02 120IV-VESUVIO/LL-045 45 55 2,5 170 1,15 120IV-VESUVIO/LL-051 51 61 2,5 180 1,32 120IV-VESUVIO/LL-060 60 70 2,5 190 1,53 120IV-VESUVIO/LL-063 63,5 73,5 2,5 200 1,61 120IV-VESUVIO/LL-065 65 75 2,5 210 1,65 120IV-VESUVIO/LL-070 70 80 2,5 230 1,76 120IV-VESUVIO/LL-076 76 86 2,5 250 1,90 120IV-VESUVIO/LL-080 80 90 2,5 290 2,00 120IV-VESUVIO/LL-090 90 100 2,5 330 2,37 120IV-VESUVIO/LL-102 102 112 2,5 410 2,67 120

34

STONEHOSEInternal layer:Reinforcement:External layer:

Working temp.:

Black, smooth PVC/NBR compoundDouble polyester cordBlack or yellow, smoothPVC/PU compoundFrom -10C to +60C

Lightweight, very flexible hose designed for compressed air. Highly resistant to abrasion and mineral oil. Yellow external layer ensures very good hose visibility. It is used for pneumatic hammers and air-drills.

Characteristics:


working pressure

[bar]

bursting press. 20C

[bar]

bursting press. 60C

[bar]

weight [kg/m]

standard length

[m]ME-STONE-19 19 27 20 75 55 0,39 60ME-STONE-25 25 35 20 75 55 0,60 60


SUPER NOBELAIR SOFTInternal layer:Reinforcement:External layer:Working temp.:

Black PVCPolyester cordBlue PVCFrom -20C to +60C

Highly flexible hose designed for compressed air. Due to such qualities as: lightweight, flexibility in low temperatures and resistance to elongation it is used for pneumatic tools, compressors, hose reels, etc.

Characteristics:


working press. 20C

[bar]

bursting press. 20C

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]TR-SUPNOBS-06 6,3 11 15 60 45 0,09 50TR-SUPNOBS-08 8 13 15 60 56 0,10 50TR-SUPNOBS-09 9 14,5 15 60 63 0,13 50TR-SUPNOBS-10 10 15,5 15 60 70 0,14 50TR-SUPNOBS-12 12,7 19 15 60 89 0,20 50TR-SUPNOBS-16 16 23 15 60 112 0,27 50TR-SUPNOBS-19 19 26,5 15 60 133 0,34 50TR-SUPNOBS-25 25 33,5 15 60 175 0,50 50

35

NOBELAIR AS / RInternal layer:Reinforcement:External layer:Working temp.:

Black, antistatic PVCPolyester cordDull blue PVCFrom -20C to +60C

Highly flexible hose designed for compressed air. Due to such qualities as: lightweight, flexibility in low temperatures and resistance to elongation it is used for pneumatic tools, compressors, hose reels, etc. Manufactured according to EN 14593, EN 14594 standards.Antistatic (R

36

MONTANA 20Internal layer:Reinforcement:External layer:Working temp.:

Black, smooth SBR rubberSynthetic cordBlack, smooth EPDM rubberFrom -35C to +70C

Flexible hose for air and water used for heavy-duty applications. Internal layer resistant to oil mist. It is resistant to abrasion and weather conditions.


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]IV-MONTA/20-010 10 19 20 60 0,29 120IV-MONTA/20-013 13 23 20 60 0,38 120IV-MONTA/20-016 16 26 20 60 0,42 120IV-MONTA/20-019 19 30 20 60 0,59 120IV-MONTA/20-025 25 35 20 60 0,61 120IV-MONTA/20-032 32 44 20 60 0,95 120IV-MONTA/20-038 38 51 20 60 1,18 120IV-MONTA/20-040 40 54 20 60 1,22 120IV-MONTA/20-051 51 69 20 60 2,26 120IV-MONTA/20-063 63,5 81,5 20 60 2,69 120IV-MONTA/20-076 76 94,5 20 60 3,12 120IV-MONTA/20-090 90 110 20 60 3,94 120IV-MONTA/20-102 102 122 20 60 4,44 120


ALASKAInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth SBR rubberSteel braidYellow, smooth EPDM rubberFrom -30C to +70C

Robust and resistant to the most severe working conditions in mining, quarries, construction industry, etc. Designed for air applications.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]IV-ALASKA-013 13 25 70 210 0,57 120IV-ALASKA-019 19 31,5 50 150 0,75 120IV-ALASKA-025 25 37,5 45 135 0,93 120IV-ALASKA-032 32 48 45 135 1,58 120IV-ALASKA-038 38 55 45 135 1,94 120IV-ALASKA-051 51 68 40 120 2,40 120IV-ALASKA-063 63,5 80 35 105 2,85 120IV-ALASKA-076 76 96,5 35 105 4,67 120IV-ALASKA-102 102 127 30 90 7,26 60

Characteristics:

37

SAHARA BDInternal layer:Reinforcement:External layer:Working temp.:

White, smooth EPR rubberSynthetic cordBlue EPDM rubberFrom -40C to +220C(with peaks up to +240C)

Flexible, kink resistant hose designed for hot air transfer in industrial installations as well as in cement, feed and tank trucks, etc. External layer resistant to abrasion, ozone and weather conditions. Fulfils FDA requirements.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

standard length

[m]IV-SAHARA/BD-025 25 41 10 30 120IV-SAHARA/BD-032 32 48 10 30 120IV-SAHARA/BD-038 38 54 10 30 120IV-SAHARA/BD-040 40 56 10 30 120IV-SAHARA/BD-051 51 69 10 30 120IV-SAHARA/BD-060 60 78 10 30 120IV-SAHARA/BD-063 63,5 82 10 30 120IV-SAHARA/BD-076 76 94 10 30 120IV-SAHARA/BD-090 90 108 10 30 120IV-SAHARA/BD-102 102 125 10 30 120


SAHARA / LL BDInternal layer:Reinforcement:External layer:Working temp.:

White, smooth EPR rubberSynthetic cord, steel helix wireBlue EPDM rubberFrom -40C to +220C(with peaks up to +240C)

Flexible, kink resistant hose designed for hot air transfer in industrial installations as well as in cement, feed and tank trucks, etc. External layer resistant to abrasion, ozone and weather conditions. Fulfils FDA requirements.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

standard length

[m]IV-SAHARA/LL/BD-025 25 37 10 30 120IV-SAHARA/LL/BD-032 32 44 10 30 120IV-SAHARA/LL/BD-038 38 50 10 30 120IV-SAHARA/LL/BD-040 40 53 10 30 120IV-SAHARA/LL/BD-051 51 64 10 30 120IV-SAHARA/LL/BD-060 60 74 10 30 120IV-SAHARA/LL/BD-063 63,5 77,5 10 30 120IV-SAHARA/LL/BD-076 76 91 10 30 120IV-SAHARA/LL/BD-090 90 105,5 10 30 120IV-SAHARA/LL/BD-102 102 117,5 10 30 120

38

RAIL BRAKE UIC-830-I-85Internal layer:Reinforcement:External layer:

Black, smooth synthetic rubberSynthetic cordBlack, smooth synthetic rubber

Flexible hose used for air transfer in railway air brake systems according to UIC-830-I-85 standards.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]IV-RAILBUIC-16 16 32 10 70 0,52 120IV-RAILBUIC-18 18 32 10 70 0,67 120IV-RAILBUIC-22 22 38 10 70 0,75 120IV-RAILBUIC-28 28 46 10 70 0,82 120IV-RAILBUIC-30 30 46 10 70 0,86 120IV-RAILBUIC-35 35 51 10 70 0,95 120


BREATHING HOSEInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth EPDM rubberAramid cordBlack, smooth EPDM rubberFrom -40C to +120C

Very flexible delivery hose designed to convey compressed air or fresh air for breathing. Widely used in breathing masks and compressed air supply lines. Electrical conductivity of external and internal layer at 103 /m < R < 108 /m level. Extremely durable and reliable due to its high resistance to temperature and abrasion. Meets the requirements of EN14593/14594 standard.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

bending radius [mm]

weight [kg/m]

standard length

[m]TR-5501735 7,2 14,2 10 80 100 0,17 80TR-5501738 9,5 17,5 10 80 125 0,24 80

AIR BRAKEInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth EPDM rubberHigh strength synthetic cordBlack, smooth EPDM rubberFrom -40C to +70C

Hose used for air transfer in car brake systems. Manufactured according to DIN 74310standards.Characteristics:


working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]IV-AIRBRAKEDIN-11 11 18 10 25 0,17 100IV-AIRBRAKEDIN-13 13 25 10 25 0,40 100

39


HILCOFLEX SPEZIAL 90Material:

Working temp.:

Yellow NBR/PVC compound totally embedded in polyester/polyamide braid during hose extrusion processFrom -20C to +100C

Heavy duty, delivery hose designed to transfer water or compressed air in irrigation systems, agriculture, mining, construction sites, etc. The colour (yellow) ensures perfect visibility. Excellent resistance to abrasion, ozone, weather conditions, oil, fuel and a wide range of chemicals. More flexible and lightweight compared to standard rubber hoses. Easy handling and storage due to layflat construction. Does not require cleaning nor drying. For pneumatic hammers and air-drills there is DN 20 or DN 25 option available, both 20 m long with increased flow claw couplings, ensuring minimum pressure loss.

Characteristics:

code I.D. [mm]

wall thickness

[mm]

working pressure [bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]water airGH-HFLEX/S90-020 20 2,3 30 22 90 0,19 100GH-HFLEX/S90-026 26 2,5 30 22 90 0,23 100GH-HFLEX/S90-038 38 3,3 30 22 90 0,40 100GH-HFLEX/S90-052 52 3,3 30 22 90 0,60 100

HILCOFLEX SPEZIAL 90 assemblyGH-HFLEX/S90-020/20 20 2,3 30 22 90 0,19 20GH-HFLEX/S90-026/20 26 2,5 30 22 90 0,23 20

INDUSTRIAL / SRInternal layer:Reinforcement:Working temp.:

Smooth synthetic rubberPolyester braid with polyester helix wire From -40C to +70C

Very lightweight, flexible hose designed for fire protection in buildings, transfer of air, dust or light solid particles. Manufactured according to EN 694 specifications.

Characteristics:


working pressure

[bar]

bursting pressure

[bar]

standard length

[m]BZ-INDUSTRIAL/SR-25 25 29 12 42 100

40

JAMAICA LInternal layer:Reinforcement:External layer:Working temp.:

Black, smooth PVCPolyester cordBlue, yellow or black PVCFrom -10C to +60C

Very lightweight, flat (when not used) delivery hose designed for water transfer. Widely used in agriculture, mining, shipbuilding, etc.

Characteristics:


code I.D. [mm]

working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]ME-JAMAIL-020 20 8,5 25,5 0,13 50/100ME-JAMAIL-025 25 8,5 25,5 0,15 50/100ME-JAMAIL-032 32 8,5 25,5 0,21 50/100ME-JAMAIL-035 35 8,5 25,5 0,22 50/100ME-JAMAIL-038 38 8,5 25,5 0,24 50/100ME-JAMAIL-040 40 8,5 25,5 0,25 50/100ME-JAMAIL-045 45 6,5 19,5 0,28 50/100ME-JAMAIL-051 51 6,5 19,5 0,32 50/100ME-JAMAIL-063 63 6,5 19,5 0,42 50/100ME-JAMAIL-070 70 5,5 16,5 0,45 50/100ME-JAMAIL-076 76 5,5 16,5 0,52 50/100ME-JAMAIL-080 80 5,5 16,5 0,58 50/100ME-JAMAIL-090 90 5,5 16,5 0,66 50/100ME-JAMAIL-102 102 5,5 16,5 0,72 50/100ME-JAMAIL-110 110 5,5 16,5 0,78 50/100ME-JAMAIL-127 127 3 9 1,13 50/100ME-JAMAIL-152 152 3 9 1,35 50/100ME-JAMAIL-204 204 2,5 7 2,00 50

41


HILCOFLEXMaterial:

Working temp.:

Black NBR/PVC compound totally embedded in polyester/polyamide braid during hose extrusion processFrom -20C to +100C

Heavy duty, delivery hose designed to transfer water or compressed air in irrigation systems, agriculture, mining, construction sites, etc. Resistant to abrasion, ozone, weather conditions, oiil, fuel and a wide range of chemicals. More flexible and lightweight compared to standard rubber hoses. Easy handling and storage since the hose is a layflat type. Does not require cleaning nor drying. Lengths up to 200m available from 76 mm diameter.

Characteristics:

code I.D. [mm]

wall thickness

[mm]

working pressure [bar]

bursting pressure

[bar]

weight [kg/m]

standard length

[m]water airGH-HFLEX-020 20 2 25 18 75 0,16 100GH-HFLEX-026 26 2 25 18 75 0,18 100GH-HFLEX-032 32 2 20 15 60 0,23 100GH-HFLEX-035 35 2 16 12 50 0,25 100GH-HFLEX-038 38 2 16 12 50 0,28 100GH-HFLEX-045 45 2,2 16 12 50 0,35 100GH-HFLEX-052 52 2,2 16 12 50 0,40 100GH-HFLEX-055 55 2,2 16 12 50 0,44 100GH-HFLEX-060 60 2,2 16 12 50 0,47 100GH-HFLEX-065 65 2,2 16 12 50 0,51 100GH-HFLEX-070 70 2,3 16 12 50 0,60 100GH-HFLEX-076 76 2,5 16 12 50 0,68 100GH-HFLEX-080 80 2,5 16 12 50 0,75 100GH-HFLEX-090 90 2,8 16 12 50 0,90 100GH-HFLEX-102 102 2,8 16 12 50 1,00 100GH-HFLEX-110 110 3 16 12 50 1,10 100GH-HFLEX-120 120 3 15 11 45 1,30 100GH-HFLEX-127 127 3 15 11 45 1,40 100GH-HFLEX-152 152 3 14 10 42 1,70 100GH-HFLEX-203 203 3,3 14 10 42 2,40 100

INDUSTRIAL / PVCInternal layer:Reinforcement:Working temp.:

Smooth PVCPolyester braidFrom -40C to +70C

Very lightweight, flexible hose for general application. Widely used in industry, agriculture and on construction sites. Delivered as complete hose assemblies with aluminium STORZ couplings.

Characteristics:

code I.D. [mm]

working pressure

[bar]

bursting pressure

[bar]

lug distance

[mm]

standard length

[m]BZ-INDUSTRIAL/PVC-45/20 45 8 20 C-66 20

42

FIRE UNIVERSALInternal layer:Reinforcement:Working temp.:

PVC inner liningPolyester braidFrom -30C to +50C

Very lightweight, flexible hose designed for fire protection in buildings, fire hydrants and other equipment used by firefigthers. Widely used in all branches of civil engineering. Manufactured according to EN 14540 specifications.

Characteristics:

code I.D. [mm]

working pressure

[bar]

bursting pressure

[bar]

lug distance

[mm]

standard length

[m]hose assembly with STORZ couplings

BZ-FIRE/U-025/15 25 15 45 D-31 15BZ-FIRE/U-025/20 25 15 45 D-31 20BZ-FIRE/U-052/15 52 15 45 C-66 15BZ-FIRE/U-052/20 52 15 45 C-66 20BZ-FIRE/U-075/20 75 15 45 B-89 20BZ-FIRE/U-110/20 110 12 36 A-133 20

hoseBZ-FIRE/U-025 25 15 45 - 100BZ-FIRE/U-052 52 15 45 - 100BZ-FIRE/U-075 75 15 45 - 100BZ-FIRE/U-110 110 12 36 - 100


FIRE UNIVERSAL / PUInternal layer:Reinforcement:External layer:Working temp.:

Smooth polyurethanePolyester braidRed polyurethane coatingFrom -40C to +70C

Very lightweight, flexible hose designed for fire protection in buildings, fire pumps, water pumps and other equipment used by firefighters. Widely used in all branches of civil engineering. Polyurethane external layer is dirt repellent and increases resistance to wear and abrasion.

Characteristics:

code I.D. [mm]

working pressure

[bar]

bursting pressure

[bar]

lug distance

[mm]

standard length

[m]hose assembly with STORZ couplings

BZ-FIRE/U/PU-052/20 52 15 45 C-66 20BZ-FIRE/U/PU-075/20 75 15 45 B-89 20BZ-FIRE/U/PU-110/20 110 12 36 A-133 20

hoseBZ-FIRE/U/PU-052 52 15 45 - 100BZ-FIRE/U/PU-075 75 15 45 - 100BZ-FIRE/U/PU-110 110 12 36 - 100

43


GREENMaterial:Reinforcement:Working temp.:

PVCRigid PVC wire helix From -25C to +55C

Flexible hose designed for water and sewage. Used in industrial applications. Due to high resistance to low temperature it is widely used to empty septic tanks. Version with antistatic wire is available on request.

Characteristics:


working press. 20C

[bar]

vacuum [bar]

bending radius [mm]

weight [kg/m]

standard length

[m]ME-GREEN-051 51 62 4,5 0,9 200 0,96 30ME-GREEN-063 63,5 75,5 4 0,9 250 1,30 30ME-GREEN-076 76 89 3,5 0,9 300 1,70 30ME-GREEN-080 80 93 3,5 0,9 320 1,75 30ME-GREEN-102 102 116 3 0,9 400 2,60 30ME-GREEN-110 110 125 2,7 0,9 440 3,00 30ME-GREEN-127 127 144 2,3 0,9 500 3,60 20/30ME-GREEN-152 152 170 1,8 0,9 600 4,70 20/30

Characteristics: Special high pressure hose designed for snow guns, resistant to abrasion, UV radiation, weather conditions and ozone. The colour (yellow) of the external layer ensures perfect visibility even on snow. Delivered as complete hose assemblies with CAMLOCK C and E couplings made of AISI 316, maximum working pressure 60 bar.

SNOWBLASTInternal layer:Reinforcement:External layer:

Working temp.:

EPDM rubberPolyester braid Special, yellow coatingresistant to abrasionFrom -40C to +100C

code I.D. [mm]

wall thickness

[mm]

working pressure

[bar]

bursting pressure

[bar]

weight [kg/m]

length [m]

GH-SNOWBLAST-52/10 52 4 60 150 0,7 10GH-SNOWBLAST-52/20 52 4 60 150 0,7 20

44


Characteristics:

ARIZONA SUPERELASTICMaterial:Reinforcement:Working temp.:

PVCRigid PVC helix wireFrom -25C to +55C

Flexible hose designed for water and sewage. Widely used to empty septic tanks, in irrigation systems, to transfer water in industrial systems, etc. Remains very flexible at low temperature. Available as an AS antistatic type with antistatic wire or ARIZONA EXTREME ELASTIC that remains flexible even at very low temperature (up to -40C).

code I.D. [mm]

wall thickness

[mm]

working press. 20C

[bar]

vacuum [bar]

bending radius [mm]

weight [kg/m]

standard length

[m]standard version

ME-ARIZONA/S-025 25 4,4 7 0,9 100 0,50 50ME-ARIZONA/S-032 32 4,4 6 0,9 130 0,60 50ME-ARIZONA/S-038 38 4,4 6 0,9 150 0,70 50ME-ARIZONA/S-045 45 5 5,5 0,9 180 0,90 50ME-ARIZONA/S-050 50 5,5 5 0,9 200 1,05 50ME-ARIZONA/S-060 60 5,6 4,5 0,9 240 1,25 50ME-ARIZONA/S-063 63 6 4,5 0,9 250 1,39 50ME-ARIZONA/S-075 75 6,5 4 0,9 300 1,70 30ME-ARIZONA/S-076 76 6,5 4 0,9 300 1,70 30ME-ARIZONA/S-080 80 6,5 3,5 0,9 320 1,85 30ME-ARIZONA/S-090 90 6,7 3,5 0,9 360 2,25 30ME-ARIZONA/S-100 100 7,4 3 0,9 400 2,70 30ME-ARIZONA/S-102 102 7,3 3 0,9 400 2,70 30ME-ARIZONA/S-110 110 7,5 3 0,9 440 3,10 20ME-ARIZONA/S-120 120 8 2,5 0,9 480 3,60 20ME-ARIZONA/S-125 125 8,3 2,5 0,9 500 3,90 20ME-ARIZONA/S-127 127 8,3 2,5 0,9 510 3,90 20ME-ARIZONA/S-130 130 8,5 2,5 0,9 520 4,10 20ME-ARIZONA/S-133 133 8,5 2 0,9 550 4,20 20ME-ARIZONA/S-150 150 9 2 0,9 600 5,00 20ME-ARIZONA/S-152 152 9 2 0,9 610 5,00 20ME-ARIZONA/S-160 160 9,4 2 0,9 640 5,60 20ME-ARIZONA/S-200 200 13 1,5 0,9 800 10,00 -

antistatic versionME-ARIZONA/S/AS-076 76 6,5 4 0,9 300 1,71 30ME-ARIZONA/S/AS-102 102 7,3 3 0,9 400 2,72 30ME-ARIZONA/S/AS-127 127 8,3 2,5 0,9 510 3,92 20ME-ARIZONA/S/AS-152 152 9 2 0,9 610 5,03 20

45

HI-VACInternal layer:Reinforcement:External layer:Working temp.:

PolyethyleneRigid helix wirePolyethyleneFrom -45C to +65C

Flexible hose designed for water and sewage. Due to high resistance to low temperature it is widely used as an empting hose for septic tanks, portable restrooms, toilets. Delivered in lengths listed below with welded cuffs as a standard.

Characteristics:

GENESIS ToiVacMaterial:Reinforcement:Working temp.:

PolyethylenePolyethylene profileFrom -40C to +60C

Flexible hose designed for water and sewage. Due to high resistance to low temperature it is widely used as an empting hose for septic tanks, portable restrooms, toilets. Delivered in lengths listed below with welded cuffs as a standard.

Characteristics:


code I.D. [mm]vacuum

[bar]

bending radius [mm]

weight [kg/pcs]

length [m]

SC-GENESIS/TV-051/1051 0,95 85

11,00 10SC-GENESIS/TV-051/15 16,50 15SC-GENESIS/TV-051/20 22,00 20SC-GENESIS/TV-063/10

63 0,95 10512,50 10

SC-GENESIS/TV-063/15 18,80 15SC-GENESIS/TV-063/20 25,00 20SC-GENESIS/TV-076/10

76 0,9 12515,00 10

SC-GENESIS/TV-076/15 22,50 15SC-GENESIS/TV-076/20 30,00 20SC-GENESIS/TV-102/10

102 0,85 16520,00 10

SC-GENESIS/TV-102/15 30,00 15SC-GENESIS/TV-102/20 40,00 20

code description

SC-GENESIS/TV-51K cuff for GENESIS 51 mmSC-GENESIS/TV-63K cuff for GENESIS 63 mmSC-GENESIS/TV-76K cuff for GENESIS 76 mm


bursting pressure

[bar]

vacuum [bar]

bending radius [mm]

weight [kg/pcs]

length [m]

PR-HIVAC-51/03

51 70 4 0,98 125

3,80 3PR-HIVAC-51/09 11,60 9,15PR-HIVAC-51/12 15,50 12,2PR-HIVAC-5

tubes catalogue

Documents

mail order

conditions of sale

company branches

direct sale

specific products

sale optionstwo ways

standard terms of sale

precise names of products