tube and hose fittings - cords canada ltd. · 170 cords canada ltd., 62 densley avenue, toronto, on...

TUBE ANDHOSE FITTINGS

168 Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1

Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: [email protected]

Suggested advantages:

• No corrosion

• Lightweight

• Can often be used with fluids that

attack metals

• Low cost

• Do not cut fingers

• Electrically non-conductive

• No galvanic reaction with metals

• Made of materials listed by FDA.

Other fittings not listed here are

available. Can be run in other materials

(eg. nylon 6-6HS, polypropylene) for a

minimum of 10,000.

NOTES:

MPT – Male taper pipe thread

GHT – Garden hose thread

Temperature Ratings

HDPE: -55° to +90°C

Nylon: -40° to +100°C

ADAPTERS–MALE

ADAPTERS–FEMALE

1/8

1/4

3/8

1/2

3/4

GHT

1

1-1/4

1-1/2

2

5/32

3/16

1/4

5/16

3/8

3/16

1/4

5/16

3/8

1/2

1/4

5/16

3/8

1/2

5/8

3/16

1/4

3/8

1/2

5/8

3/4

1

1/4

3/8

1/2

5/8

3/4

1

3/16

1/4

3/8

1/2

5/8

3/4

3/4

1

1

1-1/4

1-1/2

3/4

1

1-1/4

1-1/2

2

F 253 PE

F 23 PE

F 24 PE

F 25 PE

F 26 PE

F 43 PE

F 44 PE

F 45 PE

F 46 PE

F 48 PE

F 64 PE

F 65 PE

F 66 PE

F 68 PE

F 610 PE

F 83 PE

F 84 PE

F 86 PE

F 88 PE

F 810 PE

F 812 PE

—

F 124 PE

F 126 PE

F 128 PF

F 1210 PE

F 1212 PE

—

—

—

—

—

—

F 1612 PE

F 1616 PE

—

—

—

—

—

—

—

—

F 253

F 23

F 24

F 25

F 26

F 43

F 44

F 45

F 46

F 48

F 64

F 65

F 66

F 68

F 610

F 83

F 84

F 86

F 88

F 810

F 812

F 816

F 124

F 126

F 128

F 1210

F 1212

F 1216

F G3

F G4

F G6

F G8

F G10

F G12

F 1612

F 1616

A 1141

A 114

A 114112

A 11234

A 1121A 112114

A 112

A 200

Minimum order 50.

Nylon 6 Black HDPE MPT Tube ID

Part No.

Plastic Tube and Hose Fittings

Available in sizes 1/8"-3/4"tube ID in both natural nylonand black polyethylene.

169Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1


ELBOWS-MALE

1/8

1/4

3/8

1/2

3/4

GHT

1

1-1/4

1-1/2

2

3/16

1/4

5/16

3/8

3/16

1/4

5/16

3/8

1/2

5/8

1/4

5/16

3/8

1/2

5/8

1/4

3/8

1/2

5/8

3/4

1

1/4

3/8

1/2

5/8

3/4

1

3/8

1/2

3/4

1

1/2

3/4

1

1

1-1/4

1-1/2

2

E 23

E 24

E 25

E 26

E 43

E 44

E 45

E 46

E 48

E 410

E 64

E 65

E 66

E 68

E 610

E 84

E 86

E 88

E 810

E 812

E 816

E 124

E 126

E 128

E 1210

E 1212

E 1216

EL 3438G

EL 3412G

EL 3434G

EL 3410G

E 168

E 1612

E 1616

EL 1141

EL 114

EL 112

EL 200

E 23 PE

E 24 PE

E 25 PE

E 26 PE

E 43 PE

E 44 PE

E 45 PE

E 46 PE

E 48 PE

E 410 PE

E 64 PE

E 65 PE

E 66 PE

E 68 PE

E 610 PE

E 84 PE

E 86 PE

E 88 PE

E 810 PE

E 812 PE

—

E 124 PE

E 126 PE

E 128 PE

E 1210 PE

E 1212 PE

E 1216 PE

—

—

—

—

—

E 1612 PE

E 1616 PE

—

—

—

—

Nylon 6 Black HDPE MPT

Tube

ID

Male Part No.

Minimum order 50.

NOTES:



Temperature Ratings

HDPE: -55° to +90°C

Nylon: -40° to +100°C

ELBOWS–FEMALE

Plastic Tube and Hose Fittings CONTINUED

Available in sizes 1/8"-3/4"tube ID in both natural nylonand black polyethylene.



L 33

L 44

L 66

L 84

L 86

L 88

L 1010

L 1212

L 1616

EB 112

EB 200

L 33 PE

L 44 PE

L 66 PE

L 84 PE

L 86 PE

L 88 PE

L 1010 PE

L 1212 PE

—

—

—

Tube ID Tube IDNylon 6 Black HDPE

ELBOWS–BARBED

1/8

1/4

3/8

1/2

3/4

1

3/16

1/4

3/16

1/4

3/8

1/2

1/4

3/8

1/2

3/8

1/2

1

3/4

1

1

AT 23

AT 24

AT 43

AT 44

AT 46

AT 48

AT 64

AT 66

AT 68

AT 86

AT 88

AT 816

AT 1212

AT 1216

AT 1616

MPT Hose ID

TEES–ADAPTER

Part No.

Nylon 6 Black HDPE

Part No.

AT 23 PE

AT 24 PE

AT 43 PE

AT 44 PE

AT 46 PE

AT 48 PE

AT 64 PE

AT 66 PE

AT 68 PE

AT 86 PE

AT 88 PE

—

—

—

—

Minimum order 50.

Minimum order 50.


NOTES:


Temperature Ratings

HDPE: -55° to +90°C

Nylon: -40° to +100°C

3/16

1/4

3/8

1/2

5/8

3/4

1

1-1/2

2

3/16

1/4

3/8

1/4

3/8

1/2

5/8

3/4

1

1-1/2

2

C 22 PE

C 33 PE

C 44 PE

C 55 PE

C 66 PE

C 88 PE

C 1010 PE

C 1212 PE

C 1616 PE

—

—



SAN 4

SAN 4W

SAN 6

SAN 8

SAN G

1/4

1/4 Wing

3/8

1/2

GHT

Depends on

adapter

(see below)

Nuts_Swivel

SA 4

SA 6

SA 8

SA 8-4

SAG 4

SAG 6

SAG 8

SAG 12

SAN 4 or 4W

SAN 6

SAN 8

SAN 8

SAN G

1/4

3/8

1/2

1/4

1/4

3/8

1/2

3/4

Fits nut size Adapters_Swivel

CONNECTORS_BARBED HOSE MENDERS

CONNECTORS_REDUCING

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

1

1-1/4

1-1/2

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

1

1-1/4

1-1/2

C 22

C 33

C 44

C 55

C 66

C 88

C 1010

C 1212

C 1616

C 114

C 112

Hose ID Hose ID

1/4

3/8

1/2

5/8

1/8

3/16

1/4

1/4

3/8

3/8

1/2

C 42

C 43

C 64

C 84

C 86

C 106

C 108

SA

SAN 4W

SAN

SAG

Nylon Black HDPE

FPT Hose ID

Part No.

Not available

Not available

Minimum order 50.

Minimum order 50.

Minimum order 50.


NOTES:

FPT – Female taper pipe thread


Temperature Ratings

HDPE: -55° to +90°C

Nylon: -40° to +100°C

C 42 PE

C 43 PE

C 64 PE

C 84 PE

C 86 PE

C 106 PE

C 108 PE

Tube ID Tube ID

SWIVEL ADAPTERS AND NUTS



TEES–BARBED

Nylon Black HDPE Leg Hose ID Tee Hose IDNylon Black HDPE Leg Hose ID Tee Hose ID

T 64

T 66

T 68

T 610

T 612

T 86

T 88

T 810

T 812

T 1010

T 1212

T 1616

T 114

T 112

T 200

T 64 PE

T 66 PE

T 68 PE

T 610 PE

T 612 PE

T 86 PE

T 88 PE

T 810 PE

T 812 PE

T 1010 PE

T 1212 PE

T 1616 PE

__

__

__

3/8

1/2

5/8

3/4

1

1-1/4

1-1/2

2

1/4

3/8

1/2

5/8

3/4

3/8

1/2

5/8

3/4

5/8

3/4

1

1-1/4

1-1/2

2

PN 1/8*

PN 1/4

PN 3/8

PN 1/2

PN 3/4

.562

.812

1.000

1.250

1.500

.640

.943

1.130

1.400

1.700

.225

.232

.285

.362

.409

Part No. F D H

Minimum order 100.* This size only double chamfered; all others washer-faced. All sizes also available

taper tapped (NPT).

These natural nylon nuts are for use where insulation

is desirable, such as plumbing, electrical work, etc.

Fit NPT sizes. Straight thread (available taper thread).

Also see Nylon Locknuts, pages 92 or 131.

T 22

T 532

T 33

T 36

T 44

T 45

T 46

T 48

T 410

T 55

T 58

T 510

T 22 PE

T 532 PE

T 33 PE

T 36 PE

T 44 PE

T 45 PE

T 46 PE

T 48 PE

T 410 PE

T 55 PE

T 58 PE

T 510 PE

1/8

5/32

3/16

1/4

5/16

1/8

5/32

3/16

3/8

1/4

5/16

3/8

1/2

5/8

5/16

1/2

5/8

Part No. Part No.

Minimum order 50.


Nylon Hex Pipe Nuts

NOTES:

Temperature Ratings

HDPE: -55° to +90°C

Nylon: -40° to +100°C



The sharp barb makes a leak-proof

seal. Just push on polyurethane, PE,

PVC or other soft tubing with end cut

straight. (Withstands 75-125 psi

depending on tubing.)

Clamp may not be required for low

pressure applications.

BARBED ADAPTERS –STRAIGHT

MIF 01

MIF 11

MIF 21

MIF 225

MIF 425

MIF 02

MIF 12

MIF 22

MIF 532

MIF 32

MIF 42

MIF 62

MFF 22

MFF 24

MIF 04

MIF 24

MIF 34

MIF 44

MIF 68

MIF 88

MIF 01 PP

MIF 11 PP

MIF 21 PP

MIF 225 PP

MIF 425 PP

MIF 02 PP

MIF 12 PP

MIF 22 PP

MIF 532 PP

MIF 32 PP

MIF 42 PP

MIF 62 PP

MFF 22 PP

MFF 24 PP

MIF 04 PP

MIF 24 PP

MIF 34 PP

MIF 44 PP

MIF 68 PP

MIF 88 PP

1/16

3/32

1/8

1/8

1/4

1/16

3/32

1/8

5/32

3/16

1/4

3/8

1/8

1/16

1/8

3/16

1/4

3/8

1/2

10/32 UNF

1/4-28 UNF

1/8 MPT

1/8 FPT

1/4 FPT

1/4 MPT

1/2

Nylon Polypropylene Tube ID Thread

MIE 01

MIE 21

MIE 22

MIE 32

MIE 42

MEF 32

MEF 42

MIE 01 PP

MIE 21 PP

MIE 22 PP

MIE 32 PP

MIE 42 PP

MEF 32 PP

MEF 42 PP

1/16

1/8

1/8

3/16

1/4

3/16

1/4

10/32 UNF

1/8 MPT

1/8 FPT


BARBED ADAPTERS–ELBOW

Part No.

Part No.

Minimum order 50.

Minimum order 50.

Miniature Nylon Tube Fittings

NOTES:



Temperature Ratings

Nylon: -40° to +100°C

Polypropylene: -20° to +100°C



ELBOWS–BARBED

TEES–ADAPTER

TEES–RUN

TEES–BARBED

Nylon PP Tube ID

MIL 0

MIL 1

MIL 2

MIL 3

MIL 4

MIL 6

MIL 8

MIL 0 PP

MIL 1 PP

MIL 2 PP

MIL 3 PP

MIL 4 PP

MIL 6 PP

MIL 8 PP

1/16

3/32

1/8

3/16

1/4

3/8

1/2

MIT 0

MIT 1

MIT 2

MIT 53

MIT 3

MIT 4

MIT 6

MIT 8

MIT 0 PP

MIT 1 PP

MIT 2 PP

MIT 53 PP

MIT 3 PP

MIT 4 PP

MIT 6 PP

MIT 8 PP

1/16

3/32

1/8

5/32

3/16

1/4

3/8

1/2

Nylon Polypropylene Tube ID


Part No.

Part No.

Part No.

Part No.

MAT 21

MAT 02

MAT 42

MAT 22

MAT 21 PP

MAT 02 PP

MAT 42 PP

MAT 22 PP

1/8

1/16

1/4

1/8

10/32 UNF

1/8 MPT

MRT 32 MRT 32 PP 3/16 1/8 MPT


Minimum order 50.

Part No.

Nylon PP Tube to Tube

MIL 01

MIL 02

MIL 23

MIL 35

MIL 01 PP

MIL 02 PP

MIL 23 PP

MIL 35 PP

1/16 - 3/32

1/16 - 1/8

1/8 - 3/16

3/16 - 5/32

Reducing

Minimum order 50.

Minimum order 50.

Minimum order 50.

Regular

Miniature Nylon Tube Fittings CONTINUED

NOTES:


Temperature Ratings

Nylon: -40° to +100°C


Minimum order 50.

CONNECTORS–BARBED BARBED CONNECTORS–REDUCING

THREAD REDUCERS NIPPLE

MIC 00

MIC 11

MIC 22

MIC 33

MIC 44

MIC 66

MIC 88

1/16

3/32

1/8

3/16

1/4

3/8

1/2

Part No. Tube ID

MIC 01

MIC 02

MIC 12

MIC 32

MIC 453

MIC 43

MIC 62

MIC 64

3/32 to 1/16

1/8 to 1/16

1/8 to 3/32

3/16 to 1/8

1/4 to 5/32

1/4 to 3/16

3/8 to 1/8

3/8 to 1/4

Part No. Tube ID

MIN 11

MIN 22

MIN 44

10/32 UNF

1/8 MPT

1/4 MPT

Part No. Thread

1/8 MPT to 10/32 UNF

1/8 MPT to 1/4-28 UNF

1/4 MPT to 10/32 UNF

1/4 MPT to 1/4-28 UNF

1/4 MPT to 1/8-27 FPT

Thread

MIR 21

MIR 225

MIR 41

MIR 425

MIR 42

Part No.

PLUGS

MIP 1

MIP 2

MIP 4

10/32 UNF

1/8 MPT

1/4 FPT

Part No. Thread

Minimum order 50.

Minimum order 50.

Minimum order 50.

Minimum order 50.

Minimum order 50.

LOCKING SLEEVESLocking sleeves enable barbed fittings

to be used at up to 100% of the rated

burst pressure of the flexible plastic

tubing. To use, simply slide appropriate

sleeve over suggested OD tubing, insert

miniature barbed fitting into tubing, slide

sleeve back over barb. Soft tubing locks

onto the self-sealing barb.

LS 125

LS 156

LS 187

LS 250

LS 375

1/8

5/32

3/16

1/4

3/8

.310

.375

.400

.435

.625

.245

.281

.300

.315

.375

.147

.176

.215

.260

.425

Part No. Tube OD SD T ID

Minimum order 1000.

Miniature Nylon Tube Fittings CONTINUED

NOTES:


Temperature Ratings

Nylon: -40° to +100°C




Miniature Tube/Hose FittingsBARBED CROSS CONNECTORS

Stocked in nylon and polypropylene, this 1/4" barbed

cross fitting features 4 self-sealing barbs placed at 90o

increments from an easy-to-grip, square base and will fit

tubing with an ID of 1/4". Self-sealing sharp barbs are test-

ed to hold up to 125 P.S.I. without the use of ties or clamps.

This fitting is also available in black heat-stabilized nylon,

HDPE, LDPE, polycarbonate, Kynar and acetal if quantities

are sufficient.



Cords offers a full line of polypropylene tube

fittings including tube to tube, tube to male and

tube to female pipes. They come as union con-

nectors, bulkhead, elbow and tee unions, etc.

Sizes range from 1/4" to 5/8" nominal tube OD

and from 1/8 to 3/4 NPT for either male or

female pipe. Please call for further information.

Polypropylene Tube Fittings

Premium Grade Fittings

“Y” CONNECTORS - PREMIUM GRADE

Part No. Tubing ID

MY 01

MY 11

MY 2

MY 53

MY 3

MY 4

MY 6

1/16 x 1/16 x 1/16

3/32 x 3/32 1/32

1/8 x 1/8 x 1/8

5/32 x 5/32 x 5/32

3/16 x 3/16 x 3/16

1/4 x 1/4 x 1/4

3/8 x 3/8 x 3/8



Cords is proud to offer a full line of premium grade fittings

designed with laboratory and instrumentation applications in

mind. All premium grade fittings feature a barb moulded without

a parting line. No parting line ensures a leak-proof seal by

eliminating flash or mould mismatch in the moulding process.

Premium grade fittings are moulded from 100% virgin

material only and are carefully manufactured under controlled

conditions with new technology and inspected for even the

slightest quality defect.

These fittings have an easy-to-hold base and a barb 1.4 to

1.5 times larger (depending on size of fitting) than the tubing ID.

Once the single sharp barb is inserted into the tubing, a secure,

leak-proof seal is formed that can hold up to 125 P.S.I. without

the use of clamps or ties.

They come in Tube to Port Fittings, 90 degree Tube to Port,

Barbed Connectors, Barbed Reducing Connectors, Barbed

Tees, Barbed Reducing Tees, Barbed Elbows, etc.

Available in white nylon, natural polypropylene, natural Kynar

and clear polycarbonate.

Luer Fittings

Luer Valves

FEMALE

Full-thread female luers are designed to provide an even greater

sealing mechanism for quick-disconnect luer applications. The

full thread gives more sealing area for the connection and will

provide a virtually leak-proof seal up to 125 P.S.I. when used

with male luers that have a locking nut.

Full-thread female luers are available in natural nylon, natural

polypropylene and clear polycarbonate and come in a variety

of sizes and applications.

QUICK-DISCONNECT

Luer fittings have conical tapers moulded to ISO standards

that ensure compatibility with all luers moulded to the same

standard. With locking or non-locking characteristics, they can

be used in most any application and are pressure tested up to

125 P.S.I. They are stocked in nylon, polypropylene and clear

polycarbonate. The clear polycarbonate offers high-impact

strength with clear visibility for visual inspections.

Polycarbonate can be autoclaved and is FDA approved.

Made of nylon or clear polycarbonate, the quick-disconnect

swivel luer fittings offer a more secure lock than a standard luer

connection. The additon of the swivel luer lock assures that the

connection is strong and aids in the removal of the luer from the

connection. Simply twist the swivel nut counterclockwise and

the connection is disassembled. No need to twist the tubing or

rearrange downstream apparatus in order to accomodate the

luer connection. Allows for universal connections.

Quick-Disconnect Luer Fitting Quick-Disconnect Swivel Fitting



Manufactured in durable clear polycarbonate, featuring a

white high-density polyethylene handle, these 1-way stopcock

luer valves come with two ports with a 360o rotating handle that

will simply shut off flow when the “OFF” handle is rotated per-

pendicular with either port. This has the feature of rotating the

handle 90o in any direction to quickly change from ON to OFF or

from OFF to ON.

The 4-way stopcock luer valve has three ports with a 360o

rotating handle that will shut off flow when the “OFF” handle is

rotated in line with any port. The handle may also be rotated to

180o from the middle port to allow flow to all three ports.

They are available with locking male, slip male or threaded

female ports for easy, secure connections to standard luer appli-

cations. Our locking male port features a free-turning nut to

allow simple installation without rotating the body or the con-

necting line.

One-Way Valve Four-Way ValveOpen Closed Open Closed

PLUGS

Part No.

AP 3/8-24

AP 7/16-24

AP 1/2-20

AP 9/16-18

AP 9/16-20

ADAPTERS

Part No.

AA 3/8-24

AA 7/16-24

AA 1/2-20

AA 9/16-18

AA 9/16-20

Thread A B

Thread

3/8-24 UNF

7/16-24 UNF

1/2-20 UNF

9/16-18 UNF

9/16-20 UNF

.380

.440

.500

.560

.560

.580

.620

.660

.690

.700

3/8-24 UNF

7/16-24 UNF

1/2-20 UNF

9/16-18 UNF

9/16-20 UNF

A B C D E F

.110

.100

.110

.100

.110

.173

.173

.173

.173

.173

.380

.380

.380

.380

.380

.580

.620

.670

.690

.700

.230

.230

.230

.230

.230

.380

.440

.500

.560

.560

(5/32 ID)

(5/32 ID)

Automotive Fittings



ELBOW–FEMALE TAPER THREADS

ADAPTERS–MALE TO FEMALE THREADS

COUPLINGS –FEMALE TAPER THREADS

ELF 14

ELF 12

ELF 34

ELF 100

ELF 114

ELF 112

ELF 200

ELF 14 PP

ELF 12 PP

ELF 34 PP

ELF 100 PP

ELF 114 PP

ELF 112 PP

ELF 200 PP

1/4

1/2

3/4

1

1-1/4

1-1/2

2

1/4

1/2

3/4

1

1-1/4

1-1/2

2

G 1818

G 3412

G 3434

G 1818 PP

G 3412 PP

G 3434 PP

1/8

GHT

1/8

1/2

3/4

FTC 12

FTC 34

FTC 100

FTC 114

FTC 112

FTC 200

FTC 12 PP

FTC 34 PP

FTC 100 PP

FTC 114 PP

FTC 112 PP

FTC 200 PP

1/2

3/4

1

1-1/4

1-1/2

2

1/2

3/4

1

1-1/4

1-1/2

2

Gray Nylon Polypropylene FPT FPT

Part No.

Gray Nylon Polypropylene MPT FPT

Part No.

Gray Nylon Polypropylene FPT FPT

Part No.

Minimum order 10.

Minimum order 10.

Minimum order 10.

Pipe Fittings

NOTES:




Temperature Ratings

Nylon: -40° to +100°C




CAPS

HC 4

HC 6

HC 8

RC G

RC 12

HC 4 PE

HC 6 PE

HC 8 PE

RC G PE

RC 12 PE

1/4

3/8

1/2

GHT

3/4

Hex

Hex

Hex

Ribbed

Ribbed

Nylon 6 Black HDPE FPT Style

Part No.

Minimum order 50.

STREET ELBOWSGray Nylon Polypropylene MPT FPT

Part No.

SE 18

SE 14

SE 38

SE 12

SE 34

SE 100

SE 114

SE 112

SE 200

SE 1418

SE 1814

SE 1838

SE 1438

SE 18 PP

SE 14 PP

SE 38 PP

SE 12 PP

SE 34 PP

SE 100 PP

SE 114 PP

SE 112 PP

SE 200 PP

SE 1418 PP

SE 1814 PP

SE 1838 PP

SE 1438 PP

1/8

1/4

3/8

1/2

3/4

1

1-1/4

1-1/2

2

1/4

1/8

1/8

1/4

1/8

1/4

3/8

1/2

3/4

1

1-1/4

1-1/2

2

1/8

1/4

3/8

3/8

Minimum order 10.

Pipe Fittings CONTINUED

NOTES:



Temperature Ratings

Nylon: -40° to +100°C




NIPPLES

Nylon 6 Black HDPE MPT MPT

Part No.

Minimum order 50.

N 22

N 44

N 66

N 88

N 1212

N 1616

N 1140

N 1120

N 2000

N 22 PE

N 44 PE

N 66 PE

N 88 PE

—

N 1616 PE

—

—

—

1/8

1/4

3/8

1/2

3/4

1

1-1/4

1-1/2

2

1/8

1/4

3/8

1/2

3/4

1

1-1/4

1-1/2

2

REDUCER BUSHINGSNylon 6 Black HDPE MPT FPT

Part No.

RB 1418

RB 3818

RB 3814

RB 1214

RB 1238

RB 3418

RB 3414

RB 3438

RB 3412

RB 1012

RB 1034

RB 11434

RB 1141

RB 11234

RB 1121

RB 112114

RB 2001

RB 200114

RB 200112

RB 300200

RB 1418 PE

RB 3818 PE

RB 3814 PE

RB 1214 PE

RB 1238 PE

RB 3418 PE

RB 3414 PE

RB 3438 PE

RB 3412 PE

RB 1012 PE

RB 1034 PE

RB 11434 PE

RB 1141 PE

RB 11234 PE

RB 1121 PE

RB 112114 PE

RB 2001 PE

RB 200114 PE

RB 200112 PE

RB 300200 PE

1/4

3/8

1/2

3/4

1

1-1/4

1-1/2

2

3

1/8

1/8

1/4

1/4

3/8

1/8

1/4

3/8

1/2

1/2

3/4

3/4

1

3/4

1

1-1/4

1

1-1/4

1-1/2

2

Minimum order 10.

NOTES:



Temperature Ratings

HDPE: -55° to +90°C

Nylon: -40° to +100°C

NIPPLES–REDUCER

Nylon 6 Black HDPE MPT MPT

Part No.

Minimum order 50.

R 42

R 62

R 64

R 82

R 84

R 86

R 126

R 128

R G8

R G12

R 42 PE

R 62 PE

R 64 PE

R 82 PE

R 84 PE

R 86 PE

R 126 PE

R 128 PE

—

—

1/4

3/8

1/2

3/4

GHT

1/8

1/8

1/4

1/8

1/4

3/8

3/8

1/2

1/2

3/4


NOTES:




Temperature Ratings

HDPE: -55° to +90°C

Nylon: -40° to +100°C



PLUGS –HEX HEAD

Nylon 6 Black HDPE MPT

Part No.

P 2

P 4

P 6

P 8

PG 12

P 12

P 16

P 114

P 112

P 2 PE

P 4 PE

P 6 PE

P 8 PE

__

P 12 PE

P 16 PE

P 114 PE__

1/8

1/4

3/8

1/2

3/4 GHT

3/4

1

1-1/4

1-1/2

Minimum order 50.




TT 1218

TT 3418

TT 3414

TT 10018

TT 10014

TT 11418

TT 11414

TT 11218

TT 11214

TT 1218 PP

TT 3418 PP

TT 3414 PP

TT 10018 PP

TT 10014 PP

TT 11418 PP

TT 11414 PP

TT 11218 PP

TT 11214 PP

1/2

3/4

1

1-1/4

1-1/2

1/8

1/8

1/4

1/8

1/4

1/8

1/4

1/8

1/4

TEES–FEMALE TAPER THREADS

GAUGE TEES–FEMALE TAPER THREADS with port for gauge

TTM 18

TTM 14

TT 12

TT 34

TT 100

TT 114

TT 112

TT 200

TTM 18 PP

TTM 14 PP

TT 12 PP

TT 34 PP

TT 100 PP

TT 114 PP

TT 112 PP

TT 200 PP

1/8

1/4

1/2

3/4

1

1-1/4

1-1/2

2

Gray Nylon 6 Polypropylene FPT

Part No.

Gray Nylon 6 Polypropylene FPT Tee FPT Gauge

Part No.

Minimum order 10.

Minimum order 10.

NOTES:



Temperature Ratings

HDPE: -55° to +90°C

Nylon: -40° to +100°C

FLEXIBLE VINYL (PVC)DUROMETER 68 SHORE A

Plasticized from non-toxic, flexible

PVC, this tubing is resistant to a wide

range of chemicals. A good choice for

various piping problems where the use

of corrosive, pure or sensitive solutions

is involved. While not as strong or kink-

resistant as polyurethane tubing, this is

an excellent alternative choice if cost is

the determining factor.

Available in 12 sizes, from IDs of

1/16" up to 1/4" (some IDs have

different wall thicknesses to choose

from). They come in both 100-foot coils

and bulk reel lengths in natural (clear),

black, white, and in the following opaque

colours: blue, yellow, red and green.

(Note: all pigments are non-migratory.)

Vinyl tubing is also available in crystal

clear 70 durometer, in tube IDs of 1/16"

up to 2-1/2". Formulated of V-1 vinyl, it

fully meets FDA specifications for con-

tact with food and drugs for human con-

sumption.

POLYURETHANE DUROMETER 85 SHORE A

This polyether-based polyurethane

tubing shares the best properties of two

materials: it has the elongation and

recovery characteristics associated with

rubber and also offers the chemical

resistance of plastic. It demonstrates

superior resistance to kinking, abrasion,

tearing, hydrolysis, oxidation, ozone,

fungus and humidity. It’s an excellent

choice for flexibility, even in cold temper-

atures. Some of the typical uses for

polyurethane tubing are robotics, air

tools, vacuum equipment, medical and

lab applications and pressure measure-

ment apparatus.

Available in 12 sizes, from IDs of 1/16"

up to 1/4" (some IDs have different wall

thicknesses to choose from). They come

in both 100-foot coils and bulk reel

lengths in natural (clear), black, white,

and in the following opaque and trans-

parent colours: blue, yellow, red and

green. (Note: all pigments used are non-

migratory.)

POLYETHYLENE DUROMETER 55 SHORE D

Available in natural or UV-resistant

black extruded linear LDPE. Provides

excellent flexibility and low temperature

toughness. It comes in four sizes (IDs of

1/16", .170, 1/4", and 3/8") in 100-foot

coils or bulk reel lengths.

Other types of polyethylene tubing

available: instrument grade (in a variety

of colours), black flame-retardant and

black HDPE.

NYLON

The nylon tubing comes in two styles:

flexible and semi-rigid high strength. Both

are made of nylon 11 and come in either

black or white.

Flexible: Lightweight tubing with

extremely low level water absorption. Its

resistance to stress cracking far out-

weighs that of ordinary nylon tubing.

Thirteen tube IDs are available, from .093"

to .253".

Semi-rigid, high strength: This tubing

offers better chemical resistance than the

flexible nylon, has good resistance to high

ambient temperatures and low moisture

absorption. It contains no plasticizers. Its

high tensile strength gives it excellent

coupling retention in high pressure,

temperature and vibration situations.

Comes in eleven tube IDs, from .091"

to .350".

POLYPROPYLENE

Laboratory grade polypropylene tubing

comes in white or UV-resistant black. May

be used at higher temperatures and

working pressures than polyethylene.

Its resistance to environmental stress

cracking, hot water and hot corrosive

acids is excellent (it will last much longer

than nylon tubing in hot water service). It

has good resistance to vegetable oils, and

water absorption is less than .01%. Meets

FDA requirements for food contact. It is

available in seven tube IDs, from .080"

to .500".

Tubing



tube and hose fittings - cords canada ltd. · 170 cords canada ltd., 62 densley avenue, toronto, on...

Documents