BASIN A

RL:7.00

BASIN B

RL:8.00

BASIN C

RL:9.00

BASIN D

RL:6.00

MAIN HOSPITAL BUILDING

ON-GRADE CARPARK

127.2 m

114.3 m

62.9

m

74.2

m

292.7 m

72.3

m

PRODUCE FARM

CUDGEN ROAD

KINGSCLIFF TAFE

KINGSCLIFF POOLTURN

OC

K STR

EET

ENVIRONMENTAL AREA

McPHAIL AVENUE

134.3 m

14.2

m

14.1

m

63.5

m

32.6

m

57.9

m

160.5 m

320.8 m

10.2

m239.4 m

MULTI-DECK CARPARK

HEALTH HUB

30.0

m

31.5

m

SKILLS CENTRE.

EXISTING AGRICULTURAL

DAM TO BE FILLED

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONSUSE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS MUST

VERIFY ALL DIMENSIONS ON THE SITE BEFORE COMMENCING ANY

WORK OR MAKING ANY SHOP DRAWING WHICH MUST BE SUBMITTED

AND REVIEWED BEFORE MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

1

BIM

360

://T

wee

d V

alle

y H

ospi

t al/T

VH

_BS

_SIT

E_R

2018

.rvt

TWEED VALLEY HOSPITAL

06/09/19 BM BS

10363 STB-AR-SKE-PRW-1000020

BOUNDARY SETBACKS

1 : 1250@ A1

1 : 2500@A3

REV DESCRIPTION DRN DATE

1 ISSUED FOR SSD2 BM 06/09/19

0 50 100 m

PMF LEVEL

(AHD+8.0)

APZ (DRAFT 2017) 67m OFFSET

67m OFFSET FROM

IDENTIFIED HAZARD

(USED FOR INITIAL

SITING OF BUILDING

ENVELOPE AND

DETERMINATION OF

APZ'S

APZ (DRAFT 2017)

67m OFFSET

SURVEYED

TREE TRUNK

LINE

30M VEGETATION BUFFER

10M V

EGETATION B

UFFER

30M VEGETATION BUFFER

MAIN HOSPITAL BUILDING

ON-GRADE CARPARK

PRODUCE FARM

CUDGEN ROAD

KINGSCLIFF TAFE

KINGSCLIFF POOLTURNOCK STREET

ENVIRONMENTAL AREA

McPHAIL AVENUE

SKILLS CENTRE

67

.0 m

67.0 m

BASIN A

RL:7.00

BASIN B

RL:8.00

BASIN C

RL:9.00

BASIN D

RL:6.00

MULTI-DECK CARPARK

HEALTH HUB

67

.0 m

EXISTING AGRICULTURAL

DAM TO BE FILLED

LEGEND

SEDIMENT BASIN WORKS ALREADY COMPLETE

VEGETATION BUFFER

SITE BOUNDARY

67m APZ OFFSET FROM EXTERNAL BUILDING FOOTPRINT.

IPA/ OPA BOUNDARY.

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONSUSE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS MUST

VERIFY ALL DIMENSIONS ON THE SITE BEFORE COMMENCING ANY

WORK OR MAKING ANY SHOP DRAWING WHICH MUST BE SUBMITTED

AND REVIEWED BEFORE MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

1

BIM

360

://T

wee

d V

alle

y H

ospi

t al/T

VH

_BS

_SIT

E_R

2018

.rvt

TWEED VALLEY HOSPITAL

06/09/19 BM BS

10363 STB-AR-SKE-PRW-1000021

SITE SETBACK CONDITIONS

1 : 1250@ A1

1 : 2500@A3

0 50 100 m

REV DESCRIPTION DRN DATE

1 ISSUED FOR SSD2 BM 06/09/19

J K L M N O P Q R S T U V W

13 13

14 14

15 15

16 16

17 17

H1

H2

H4

H5

HA

HA

HB

HB

HC

HC

HD

HD

H3

SOUTHERN ENTRY

4595 3975 3705 3705 2720

3725

3725

3725

3500

3250

3250

3525

3975

2300

3725

5485

6380

600

3600 300

300

3600

600

6745 6745 6745 6745 7800

6240

1:65 F

ALL

1:2

6 R

ISE

1:4

2 R

ISE

1:29 RISE

1:2

6 R

ISE

PROPOSED

BUS SHELTER

TITLE BOUNDARY

150 KERBBUS LAYBY

1:4

2 R

ISE

SSL. 26.600

SSL. 26.900

SSL. 25.650

SSL. 25.650

SSL. 25.650SSL. 25.750

SSL. 25.750

SSL. 25.650

SSL. 25.650

SSL. 25.850

SSL. 25.850 SSL. 25.950

SSL. 26.000

SSL. 26.000

SSL. 25.900

SSL. 25.900

SSL. 25.950

SSL. 27.750

SSL. 25.000

SSL. 26.200

SSL. 26.900

SSL. 26.800

SSL. 26.700

SSL. 26.600

SSL. 26.500

SSL. 26.400

SSL. 26.300

SSL. 26.900

SSL. 26.400

SSL. 26.600

SSL. 26.000

SSL. 26.000

SSL. 26.200

SSL. 26.200

SSL. 26.400

SSL. 26.000

SSL. 26.200

SSL. 26.000

SSL. 26.000

SSL. 25.850

SSL. 26.000

1831

0

1039

0

8515

2340

3275

4195

15390

3000

3325

15460

4360

11585

11755

4360

3975

10585 2925

1600

6000 1450

2300

6650

SSL. 27.750

SSL. 27.750

SSL. 27.750 SSL. 27.750

SSL. 27.750

SSL. 27.750

SSL. 27.750

SSL. 27.602SSL. 27.000

SSL. 26.880

SSL. 26.970SSL. 26.970

SSL. 26.898

33290

1290

50897

1:4

3 F

AL

L

1:64 FALL

187530001365

SSL. 27.602SSL. 27.602

SSL. 27.647

SSL. 27.718

SSL. 27.750

1:4

2 F

AL

L

SSL. 27.180

SSL. 27.030SSL. 27.452

SSL. 27.452SSL. 27.452

SSL. 27.452

SSL. 27.030 SSL. 27.452

1:4

2 F

AL

L

4914

SSL. 26.860

SSL. 26.691

SSL. 26.841

1:50 RISE

27384

1:4

2 R

ISE

HUB BUILDING

RL: 26.600

MAIN HOSPITAL BUILDING

RL: 27.750

SSL. 27.100

SSL. 26.600

SSL. 27.150SSL. 27.000

SSL. 26.600

SSL. 26.500

SSL. 27.350

SSL. 27.000

CUDGEN ROAD

RETAIL OPPORTUNITIES

SSL. 25.560

SSL. 27.170

SSL. 26.900

SSL. 26.900

SSL. 27.200

SSL. 27.200

SSL. 27.350

SSL. 27.000

SSL. 26.691

SSL. 27.000

SSL. 26.600

SSL. 26.850

F G H I

17

EDCBA

SOUTHERN ROAD

CARPARK ENTRY-SOUTH

32503250

3500

3500

3525

3975

2300

3725

RAMP DOWN

ROAD ISLAND TO BE MOUNTABLE

3525

F

13

12

11

10

9

14

15

16

17

EDCBA

ED PUBLIC DROP OFF

AMBULANCE HARDSTAND

7520

3500

3500

5400

7800

3200

2300

6300

6300 6300

6300

6300

6300

2600

2600

2600

2600

2620

5400

2300

SITE KEY N.T.S

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONSUSE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS MUST

VERIFY ALL DIMENSIONS ON THE SITE BEFORE COMMENCING ANY

WORK OR MAKING ANY SHOP DRAWING WHICH MUST BE SUBMITTED

AND REVIEWED BEFORE MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

4

BIM

360

://T

wee

d V

alle

y H

ospi

t al 2

020/

TV

H_B

S_S

ITE

_A20

.rvt

TWEED VALLEY HOSPITAL

07/18/19 BM BS

10363 STB-AR-DWG-PRW-1000012

SITE HARDSTAND ZONAL

1:200@A0

1 : 200

SOUTHERN ENTRY1

1 : 200

SOUTHERN ROAD2

1 : 200

ED DROP OFF3

12

3

AREAS UNDER REVIEW

REV DESCRIPTION DRN DATE

1 ISSUED FOR INFORMATION BM 18/07/192 ISSUED FOR SCHEMATIC DESIGN BM 23/08/193 ISSUED FOR SCHEMATIC DESIGN BM 18/10/194 SUBSTRUCTURE PRELIM TENDER ISSUE BM 09/12/19

NOTE:

BUS STOPS AND SHELTERS IN ACCORDANCE WITH TWEED SHIRE COUNCIL

REQUIREMENTS AND STA BUS INFRASTRUCTURE GUIDE.

21 June - 9am 21 June - 10am

21 June - 11am 21 June - 12pm

Method of Production

Geometry produced in Revit.Survey information based on Survey 22633 B, dated 15.06.2018, produced by B & P Surveys.Shadows generated by Rhinoceros 3D & Vray.Sunlight system based on MGA 56 Zone.

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONSUSE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS MUST VERIFY ALL DIMENSIONS ON THE SITE BEFORE COMMENCING ANY WORK OR MAKING ANY SHOP DRAWING WHICH MUST BE SUBMITTED AND REVIEWED BEFORE MANUFACTURE.FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

As indicated@A1

1

BIM

360

://Tw

eed

Valle

y H

ospi

tal/T

V H_B

S_SI

T E_R

2018

. rvt

TWEED VALLEY HOSPITAL

06/09/19 CE BS

10363 STB-AR-SKE-PRW-1000030

SHADOW STUDIES(1 OF 2)

REV DESCRIPTION DRN DATE1 ISSUED FOR SSD2 BM 06/09/19

21 June - 1pm 21 June - 2pm

21 June - 3pm

Method of Production

Geometry produced in Revit.Survey information based on Survey 22633 B, dated 15.06.2018, produced by B & P Surveys.Shadows generated by Rhinoceros 3D & Vray.Sunlight system based on MGA 56 Zone.

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONSUSE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS MUST VERIFY ALL DIMENSIONS ON THE SITE BEFORE COMMENCING ANY WORK OR MAKING ANY SHOP DRAWING WHICH MUST BE SUBMITTED AND REVIEWED BEFORE MANUFACTURE.FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

As indicated@A1

1

BIM

360

://Tw

eed

Valle

y H

ospi

tal/T

V H_B

S_SI

T E_R

2018

. rvt

TWEED VALLEY HOSPITAL

06/09/19 BM BS

10363 STB-AR-SKE-PRW-1000031

SHADOW STUDIES(2 OF 2)

REV DESCRIPTION DRN DATE1 ISSUED FOR SSD2 BM 06/09/19

F

2

3

4

5

6

7

8

9

10

11

12

13

G H I J K L M N O P Q R S

1

ED

CBA

8a

9b

10a

11a

12a

FOOD

SERVICES

MATERIALS

MANAGEMENT

ENGINEERING & BIOMEDICAL

ENGINEERING

MORTUARY

ENVIRONMENTAL

SERVICES

STAFF

HUBE-HEALTH

MORTUARY

PLANT

WASTE

CLEAN DOCK

SHELL -UNALLOCATED

SHELL -UNALLOCATED

5m 10m 15m 20m 25m 30m0m

1:300

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE

THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONS

USE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS

MUST VERIFY ALL DIMENSIONS ON THE SITE BEFORE

COMMENCING ANY WORK OR MAKING ANY SHOP DRAWING

WHICH MUST BE SUBMITTED AND REVIEWED BEFORE

MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE

DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE

AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES

ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE

SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

1 : 300@A1

1

BIM

360

:// T

we

ed

Va

lley H

ospita

l/T

VH

_B

UIL

DIN

G_

R18

.rvt

TWEED VALLEY HOSPITAL

06/09/19 RN AB

10363 STH-AR-SKE-MHB-200B1001

GENERAL ARRANGEMENT PLANBASEMENT

REV DESCRIPTION DRN DATE

1 ISSUED FOR SSD 2 RN 06/09/19

F ZB

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

G H I J K L M N O P Q R S T U V W X Y Z ZA

1

ED

8a

9b

10a

11a

12a

ELECTRICAL

PLANT

PATHOLOGY

DRUG &

ALCOHOL

SATELLITE

IMAGING

EMERGENCY

DEPARTMENT

PHARMACY

MENTAL HEALTH

INPATIENT UNIT

COMMUNITY

MENTAL HEALTH

PLANT

SECURITY & FLEET

MANAGEMENT

COURTYARD COURTYARD

COURTYARD

COURTYARD

COURTYARDPUBLIC

ED ENTRY

AMBULANCE ENTRY

PA

TH

OL

OG

Y

EX

PA

NS

ION

PLANT

SERVICE YARD BELOW

OUTLIN

E OF

BUNKE

RS ABOVE

WALKWAY ABOVEMULTIFAITH

ROOF

FUTU

RE BUNKE

R

EXPANSION ABOVE

WAIT

EMERGENCY DEPARTMENT

PUBLIC ENTRY

PUBLIC LOBBY

CLINICAL LOBBY

PUBLIC LOBBY

CLINICAL LOBBY

5m 10m 15m 20m 25m 30m0m

1:300

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE

THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONS

USE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS

MUST VERIFY ALL DIMENSIONS ON THE SITE BEFORE

COMMENCING ANY WORK OR MAKING ANY SHOP DRAWING

WHICH MUST BE SUBMITTED AND REVIEWED BEFORE

MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE

DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE

AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES

ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE

SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

1 : 300@A1

1

BIM

360

:// T

we

ed

Va

lley H

ospita

l/T

VH

_B

UIL

DIN

G_

R18

.rvt

TWEED VALLEY HOSPITAL

06/09/19 RN AB

10363 STH-AR-SKE-MHB-200LG001

GENERAL ARRANGEMENT PLANLOWER GROUND

REV DESCRIPTION DRN DATE

1 ISSUED FOR SSD 2 RN 06/09/19

F

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

G H I J K L M N O P Q R S T U V W X Y Z

1

ED

8a

9b

10a

11a

12a

VOID

AMBULATORY

CARE

VOID

MEDICAL IMAGING

FRONT OF

HOUSE

BOOKING UNIT

TRANSIT

LOUNGE

VOID

VOID

RENAL

INTEGRATED CANCER

CENTRE

RADIATION ONCOLOGY

AMBULATORY CARE

PLANT

PLANT

PL

AN

T

TERRACE

PL

AN

T

PUBLIC ENTRY

MAIN ENTRY

PLANT

PLANT

AIRLOCK

TERRACE

CAFE / RETAIL

AIRLOCKSHELL

PUBLIC LOBBY PUBLIC LOBBY

CLINICAL LOBBY

CLINICAL LOBBY

SHELL -

UNALLOCATED

SHELL -

UNALLOCATED

5m 10m 15m 20m 25m 30m0m

1:300

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE

THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONS

USE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS

MUST VERIFY ALL DIMENSIONS ON THE SITE BEFORE

COMMENCING ANY WORK OR MAKING ANY SHOP DRAWING

WHICH MUST BE SUBMITTED AND REVIEWED BEFORE

MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE

DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE

AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES

ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE

SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

1 : 300@A1

1

BIM

360

:// T

we

ed

Va

lley H

ospita

l/T

VH

_B

UIL

DIN

G_

R18

.rvt

TWEED VALLEY HOSPITAL

06/09/19 RN AB

10363 STH-AR-SKE-MHB-20000001

GENERAL ARRANGEMENT PLANGROUND

REV DESCRIPTION DRN DATE

1 ISSUED FOR SSD 2 RN 06/09/19

F

4

5

6

7

8

9

10

11

12

13

14

15

16

17

G H I J K L M N O P Q R S T U V W X Y ZED

8a

9b

10a

11a

12a

INTEGRATED

PERIOPERATIVE UNIT

MATERNITY UNIT

SPECIAL CARE

NURSERY

PLANT

TERRACE

TERRACEST

AF

F

WO

RK

SP

AC

E

ST

AF

F

WO

RK

SP

AC

E

PUBLIC PUBLIC LOBBY

CLINICAL

CLINICAL

5m 10m 15m 20m 25m 30m0m

1:300

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE

THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONS

USE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS

MUST VERIFY ALL DIMENSIONS ON THE SITE BEFORE

COMMENCING ANY WORK OR MAKING ANY SHOP DRAWING

WHICH MUST BE SUBMITTED AND REVIEWED BEFORE

MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE

DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE

AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES

ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE

SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

1 : 300@A1

1

BIM

360

:// T

we

ed

Va

lley H

ospita

l/T

VH

_B

UIL

DIN

G_

R18

.rvt

TWEED VALLEY HOSPITAL

06/09/19 RN AB

10363 STH-AR-SKE-MHB-20001001

GENERAL ARRANGEMENT PLANLEVEL 01

REV DESCRIPTION DRN DATE

1 ISSUED FOR SSD 2 RN 06/09/19

F

4

5

6

7

8

9

10

11

12

13

14

15

16

17

G H I J K L M N O P Q R S T U V W X YED

8a

9b

10a

11a

12a

CSSD

PLANT

REHABILITATION UNIT

OLDER PERSONS UNIT

CHILD &

ADOLESCENT UNIT

TERRACE

STAFF

WORKSPACE

STAFF WORKSPACE

PLANT

TERRACE

REHABILITATION

UNIT - OUTPATIENT

ZONE

TERRACE

TERRACE

PUBLIC PUBLIC

CLINICAL

CLINICAL

SHELL -UNALLOCATED

PLANT

PL

AN

T

5m 10m 15m 20m 25m 30m0m

1:300

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE

THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONS

USE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS

MUST VERIFY ALL DIMENSIONS ON THE SITE BEFORE

COMMENCING ANY WORK OR MAKING ANY SHOP DRAWING

WHICH MUST BE SUBMITTED AND REVIEWED BEFORE

MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE

DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE

AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES

ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE

SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

1 : 300@A1

1

BIM

360

:// T

we

ed

Va

lley H

ospita

l/T

VH

_B

UIL

DIN

G_

R18

.rvt

TWEED VALLEY HOSPITAL

06/09/19 RN AB

10363 STH-AR-SKE-MHB-20002001

GENERAL ARRANGEMENT PLANLEVEL 02

REV DESCRIPTION DRN DATE

1 ISSUED FOR SSD 2 RN 06/09/19

F

4

5

6

7

8

9

10

11

12

13

14

15

16

17

G H I J K L M N O P Q R S T U V W X YED

8a

9b

10a

11a

12a

INTENSIVE CARE & CLOSE

OBSERVATION UNIT

CARDIOLOGY

INPATIENT UNIT

CO

RO

NA

RY

CA

RE

U

NIT

DIAGNOSTICS

INPATIENT UNIT

- 28B MEDICAL IPU (STROKE)

PLANT

STAFF

WORKSPACE

PLANT PLANT

STAFF

WORKSPACE

TE

RR

AC

E

CLINICAL

INFORMATION UNIT PLANT

PLANT

PUBLIC PUBLIC

CLINICAL CLINICAL

TERRACE

SHELL -UNALLOCATED

STAFF ON CALL

5m 10m 15m 20m 25m 30m0m

1:300

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE

THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONS

USE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS

MUST VERIFY ALL DIMENSIONS ON THE SITE BEFORE

COMMENCING ANY WORK OR MAKING ANY SHOP DRAWING

WHICH MUST BE SUBMITTED AND REVIEWED BEFORE

MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE

DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE

AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES

ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE

SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

1 : 300@A1

1

BIM

360

:// T

we

ed

Va

lley H

ospita

l/T

VH

_B

UIL

DIN

G_

R18

.rvt

TWEED VALLEY HOSPITAL

06/09/19 RN AB

10363 STH-AR-SKE-MHB-20003001

GENERAL ARRANGEMENT PLANLEVEL 03

REV DESCRIPTION DRN DATE

1 ISSUED FOR SSD 2 RN 06/09/19

F

4

5

6

7

8

9

10

11

12

13

14

15

16

17

G H I J K L M N O P Q R S T U V W XED

8a

9b

10a

11a

12aPLANT PLANT

INPATIENT UNIT -

28B SURGICAL IPU 1

INPATIENT UNIT -

28B MEDICAL IPU 2

INPATIENT UNIT - 28B

SURGICAL IPU 2

INPATIENT UNIT -

28B MEDICAL IPU 3

STAFF

WORKSPACE

STAFF

WORKSPACE

PUBLIC PUBLIC

CLINICAL CLINICAL

TERRACE

SHELL -UNALLOCATED

SHELL -UNALLOCATED

PLANT PLANT

5m 10m 15m 20m 25m 30m0m

1:300

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE

THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONS

USE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS

MUST VERIFY ALL DIMENSIONS ON THE SITE BEFORE

COMMENCING ANY WORK OR MAKING ANY SHOP DRAWING

WHICH MUST BE SUBMITTED AND REVIEWED BEFORE

MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE

DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE

AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES

ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE

SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

1 : 300@A1

1

BIM

360

:// T

we

ed

Va

lley H

ospita

l/T

VH

_B

UIL

DIN

G_

R18

.rvt

TWEED VALLEY HOSPITAL

06/09/19 RN AB

10363 STH-AR-SKE-MHB-20004001

GENERAL ARRANGEMENT PLANLEVEL 04

REV DESCRIPTION DRN DATE

1 ISSUED FOR SSD 2 RN 06/09/19

F

4

5

6

7

8

9

10

11

12

13

14

15

16

17

G H I J K L M N O P Q R S T U V W XED

8a

9b

10a

11a

12a

ADMINISTRATION

INPATIENT UNIT 7 - 25B MEDICAL IPU

(ONCOLOGY / PALLIATIVE CARE)

INPATIENT UNIT 6 -

28B SURGICAL IPU 3

STAFF

WORKSPACE / ADMIN

STAGE 2B

INPATIENT UNIT

STAGE 2B

INPATIENT UNIT

PUBLIC PUBLIC

CLINICAL

CLINICAL

PLANT PLANT

PLANT

PLANT

5m 10m 15m 20m 25m 30m0m

1:300

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE

THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONS

USE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS

MUST VERIFY ALL DIMENSIONS ON THE SITE BEFORE

COMMENCING ANY WORK OR MAKING ANY SHOP DRAWING

WHICH MUST BE SUBMITTED AND REVIEWED BEFORE

MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE

DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE

AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES

ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE

SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

1 : 300@A1

1

BIM

360

:// T

we

ed

Va

lley H

ospita

l/T

VH

_B

UIL

DIN

G_

R18

.rvt

TWEED VALLEY HOSPITAL

06/09/19 RN AB

10363 STH-AR-SKE-MHB-20005001

GENERAL ARRANGEMENT PLANLEVEL 05

REV DESCRIPTION DRN DATE

1 ISSUED FOR SSD 2 RN 06/09/19

F

4

5

6

7

8

9

10

11

12

13

14

15

16

17

G H I J K L M N O P Q R S T U V W XED

8a

9b

10a

11a

12a

PLANT

5m 10m 15m 20m 25m 30m0m

1:300

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE

THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONS

USE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS

MUST VERIFY ALL DIMENSIONS ON THE SITE BEFORE

COMMENCING ANY WORK OR MAKING ANY SHOP DRAWING

WHICH MUST BE SUBMITTED AND REVIEWED BEFORE

MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE

DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE

AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES

ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE

SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

1 : 300@A1

1

BIM

360

:// T

we

ed

Va

lley H

ospita

l/T

VH

_B

UIL

DIN

G_

R18

.rvt

TWEED VALLEY HOSPITAL

06/09/19 RN AB

10363 STH-AR-SKE-MHB-20006001

GENERAL ARRANGEMENT PLANLEVEL 06

REV DESCRIPTION DRN DATE

1 ISSUED FOR SSD 2 RN 06/09/19

F

4

5

6

7

8

9

10

11

12

13

14

15

16

17

G H I J K L M N O P Q R S T U V W X Y ZED

8a

9b

10a

11a

12a

HELIPAD

5m 10m 15m 20m 25m 30m0m

1:300

N

ARCHITECTS

CLIENT

CHECKEDDATE

DRAWING No REVISION

SCALE

PROJECT No

DRAWN BY

PROJECT

KEY PLAN

DRAWING TITLE

ABN: 21 134 476 065LEVEL 4, 89 YORK STREET

SYDNEY NSW 2000, AUSTRALIAPH: (02) 8299 4600 FAX: (03) 9885 2455

THIS ARCHITECTURAL DESIGN IS THE COPYRIGHT OF SILVER THOMAS HANLEY AND BATES SMART AND SHALL NOT BE REPRODUCED WITHOUT THEIR WRITTEN PERMISSION

COPYRIGHTALL RIGHTS RESERVED. THIS WORK IS COPYRIGHT AND CANNOT BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS (GRAPHIC, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING) WITHOUT THE WRITTEN PERMISSION OF THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT. ANY LICENCE, EXPRESS OR IMPLIED, TO USE

THE DOCUMENT FOR ANY PURPOSE WHATSOEVER IS RESTRICTED TO THE TERMS OF THE AGREEMENT OR IMPLIED AGREEMENT WITH THE PRINCIPAL UNDER THE TERMS OF THE CONTRACT.

DIMENSIONS

USE FIGURED DIMENSIONS, DO NOT SCALE. CONTRACTORS

MUST VERIFY ALL DIMENSIONS ON THE SITE BEFORE

COMMENCING ANY WORK OR MAKING ANY SHOP DRAWING

WHICH MUST BE SUBMITTED AND REVIEWED BEFORE

MANUFACTURE.

FIXTURES, FITTINGS & EQUIPMENT SPECIFICATIONS

SUBSTITUTE FF&E EQUIPMENT SPECIFICATIONS THE FIT-OUT DESIGN AND DOCUMENTATION HAS BEEN COMPLETED ON THE BASIS OF FF&E AND EQUIPMENT ADVISED TO THIS OFFICE AT THE TIME OF BRIEFING THE

DESIGN. THE DESIGN PROVISIONS FOR FF&E AND EQUIPMENT INCORPORATES SPATIAL ALLOCATIONS, SERVICING, LOADING AND ACCESS CLEARANCES AND WHERE APPROPRIATE SERVICES REQUIREMENTS, HAVING DUE REGARD FOR SURROUNDING FIXTURES AND FITTINGS. IT SHOULD BE NOTED THAT SUBSTITUTE FF&E OR EQUIPMENT WITH ALTERNATE SPECIFICATIONS SHOULD NOT BE PROCURED PRIOR TO VALIDATING THOSE SPECIFICATIONS AGAINST THE ITEM CONTROL SCHEDULE

AND DESIGN PROVISIONS IN THE MODEL. THIS OFFICE ACCEPTS NO RESPONSIBILITY FOR THE PROCUREMENT OF SUBSTITUTE FF&E AND EQUIPMENT WHICH HAS NOT BEEN REVIEWED AND VALIDATED AGAINST THE ORIGINAL DESIGN PROVISIONS.

THE SERVICE POINTS IDENTIFIED ON THESE DRAWINGS HAVE BEEN OVERLAYED FROM THE BUILDING SERVICES ENGINEERING MODEL, AND ARE PROVIDED FOR INFORMATION AND SET-OUT PURPOSES ONLY. WE HAVE BEEN ADVISED BY THE SERVICES

ENGINEERS THAT THE POINTS REPRESENTED ON THESE DRAWINGS ARE CORRECT AT THE TIME OF PUBLICATION. THIS OFFICE DOES NOT WARRANT THE ACCURACY OF THIS DATA. REFER TO THE BUILDING SERVICES ENGINEERING DOCUMENTATION FOR THE INSTALLATION OF THE SERVICES POINTS, AND THE INTERFACE BETWEEN THE

SERVICES POINTS AND THE RESPECTIVE ENGINEERING SYSTEMS.

SERVICE POINTS DISCLAIMER

ISSUED FOR INFORMATION

PROJECT MANAGER

43 BRISBANE STREET,SURRY HILLS, NSW 2010

ABN: 68 094 740 986 PH: (02) 8354 5100E: syd@batessmart.com.au

M12147

1 : 300@A1

1

BIM

360

:// T

we

ed

Va

lley H

ospita

l/T

VH

_B

UIL

DIN

G_

R18

.rvt

TWEED VALLEY HOSPITAL

06/09/19 RN AB

10363 STH-AR-SKE-MHB-20007001

GENERAL ARRANGEMENT PLANLEVEL 07

REV DESCRIPTION DRN DATE

1 ISSUED FOR SSD 2 RN 06/09/19