ttiieeââuu cchhuuaaåånn kkhhooaa hhooïïcc...

TTHHÖÖ VVIIEEÄÄNN TTRRÖÖÔÔØØNNGG ÑÑAAÏÏII HHOOÏÏCC CCOOÂÂNNGG NNGGHHIIEEÄÄPP TTPP.. HHCCMM

--------------------

SSAAÛÛNN PPHHAAÅÅMM TTRRÍÍCCHH BBAAÙÙOO TTAAÏÏPP CCHHÍÍ

KKHHOOAA HHOOÏÏCC && CCOOÂÂNNGG NNGGHHEEÄÄ

TTiieeââuu cchhuuaaåånn KKhhooaa hhooïïcc –– CCooâânngg nngghheeää

VViieeäätt NNaamm && TThheeáá ggiiôôùùii 0044//22001111

0044//22001111

hhttttpp::////lliibb..hhuuii..eedduu..vvnn

:

http://lib.hui.edu.vn/

2

Tiêu chuẩn Việt Nam

TT Số hiệu

Tiêu chuẩn Tên tiêu chuẩn A4

01 QCVN 01:2011/BCT Quy chuẩn kỹ thuật Quốc gia về an toàn trong

khai thác than hầm lò. 305

02 QCVN 03:2011/BTC Thay

thế: QCVN 3: 2008/BTC

Quy chuẩn kỹ thuật quốc gia về dự trữ nhà nước

đối với nhà bạt cứu sinh loại nhẹ. 14

03 QCVN 31:2010/BTNMT Quy chuẩn kỹ thuật quốc gia về môi trường đối

với phế liệu sắt, thép nhập khẩu. 7

04 QCVN 31:2011/BGTVT Quy chuẩn kỹ thuật quốc gia về thiết bị giám sát

hành trình của ôtô. 11

05 QCVN 7:2010/BYT

Quy chuẩn kỹ thuật quốc gia về vệ sinh phòng

bệnh truyền nhiễm trong các cơ sở giáo dục thuộc

hệ thống giáo dục quốc dân.

14

06 QCVN QTĐ-8:2010/BCT Quy chuẩn kỹ thuật quốc gia về kỹ thuật điện Tập

8: Quy chuẩn kỹ thuật điện hạ áp. 42

07 TCVN 1597-2:2010 Thay

thế: TCVN 1597-2:2006

Cao su, lưu hoá hoặc nhiệt dẻo. Xác định độ bền

xé rách. Phần 2: Mẫu thử nhỏ. 18

08 TCVN 4654-1:2009 Thay

thế: TCVN 4654:1988

Quặng sắt. Xác định hàm lượng lưu huỳnh. Phần

1: Phương pháp khối lượng. 18

09 TCVN 4654-2:2009 Thay

thế: TCVN 4654:1988

Quặng sắt. Xác định hàm lượng lưu huỳnh. Phần

2: Phương pháp đốt/chuẩn độ. 14

10 TCVN 5597:2010 Thay thế:

TCVN 5597:1991

Phụ gia cao su. Than đen. Phương pháp xác định

hàm lượng lưu huỳnh. 10


TCVN 6086:2004.

Cao su thiên nhiên thô và cao su tổng hợp thô. Lấy

mẫu và chuẩn bị mẫu. 10


TCVN 6087:2004 Cao su. Xác định hàm lượng tro. 8

3


TCVN 6088:2004. Cao su thô. Xác định hàm lượng chất bay hơi. 15

14 TCVN 6090-1:2010 Thay

thế: TCVN 6090- 1:2004

Cao su chưa lưu hoá. Phương pháp sử dụng nhớt

kế đĩa trượt. Phần 1: Xác định độ nhớt. 16


TCVN 6094:2004

Cao su. Xác định đặc tính lưu hoá bằng máy đo

lưu hoá đĩa dao động. 15


TCVN 6324:2006

Sản phẩm dầu mỏ. Xác định cặn cácbon. Phương

pháp. 14


TCVN 7143:2006

Xăng. Phương pháp xác định hàm lượng chì bằng

quang phổ hấp thụ nguyên tử. 19


TCVN 7647:2006

Cao su, lưu hoá. Xác định độ bám dính với sợi

kim loại. 20

19 TCVN 7800:2009 Tiêu chuẩn nhà ở có phòng cho khách du lịch

thuê. 10


TCVN 6092-2:2004

Cao su chưa lưu hoá. Xác định độ dẻo. Phương

pháp máy đo độ dẻo nhanh. 8


TCVN 6092:1995

Cao su thiên nhiên thô. Xác định chỉ số duy trì độ

dẻo (PRI). 12

22 TCVN 8624:2010 Quặng sắt. Xác định hàm lượng niken. Phương

pháp quang phổ hấp thụ nguyên tử ngọn lửa. 19

Tiêu chuẩn ISO

TT Số hiệu


01 ISO 4017:2011 Replace:

ISO 4017:1999 Hexagon head screws - Product grades A and B. 10


ISO 4018:1999 Hexagon head screws - Product grade C. 9

http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=56449

http://www.iso.org/iso/iso_catalogue/catalogue_ics/catalogue_detail_ics.htm?csnumber=26378



4


ISO 7048:1998 Cross-recessed cheese head screws. 5


ISO 8676:1999

Hexagon head screws with metric fine pitch thread

- Product grades A and B. 11

05

ISO 11783-13:2011

Replace: ISO 11783-

13:2007

Tractors and machinery for agriculture and

forestry - Serial control and communications data

network - Part 13: File server.

46

06 ISO 3864-1:2011 Replace:

ISO 3864-1:2002

Graphical symbols - Safety colours and safety

signs - Part 1: Design principles for safety signs

and safety markings.

17

07

ISO 17359:2011 Replace:

ISO 13380:2002;ISO

17359:2003

Condition monitoring and diagnostics of machines

- General guidelines. 26

08 ISO 14066:2011

Greenhouse gases - Competence requirements for

greenhouse gas validation teams and verification

teams.

25

09 ISO/TR 22849:2011 Design recommendations for bevel gears. 37

10 ISO 294-5:2011 Replace:

ISO 294-5:2001

Plastics - Injection moulding of test specimens of

thermoplastic materials - Part 5: Preparation of

standard specimens for investigating anisotropy.

7

11 ISO 10927:2011

Plastics - Determination of the molecular mass

and molecular mass distribution of polymer

species by matrix-assisted laser

desorption/ionization time-of-flight mass

spectrometry (MALDI-TOF-MS).

13

12 ISO 29601:2011

Paints and varnishes - Corrosion protection by

protective paint systems - Assessment of porosity

in a dry film.

7






















5

13

ISO 28927-10:2011

Replace:ISO 8662-

2:1992;ISO 8662-

3:1992;ISO 8662-5:1992

Hand-held portable power tools - Test methods for

evaluation of vibration emission - Part 10:

Percussive drills, hammers and breakers.

27

14 ISO 80601-2-12:2011

Medical electrical equipment - Part 2-12:

Particular requirements for basic safety and

essential performance of critical care ventilators.

78

15 ISO/TS 12747:2011

Petroleum and natural gas industries - Pipeline

transportation systems - Recommended practice

for pipeline life extension.

22

16 ISO 20884:2011 Replace:

ISO 20884:2004

Petroleum products - Determination of sulfur

content of automotive fuels - Wavelength-

dispersive X-ray fluorescence spectrometry.

9

17 ISO 18308:2011

Replace:ISO/TS 18308:2004

Health informatics - Requirements for an

electronic health record architecture. 25

18 ISO 1174-1:2011 Replace:

ISO 1174-1:1996

Assembly tools for screws and nuts - Driving

squares - Part 1: Driving squares for hand socket

tools.

4


ISO 3315:1996

Assembly tools for screws and nuts - Driving parts

for hand-operated square drive socket wrenches -

Dimensions and tests.

7

20

ISO 8038:2011 Replace:

ISO 8038-1:1997;ISO 8038-

2:2001

Microscopes - Screw threads for objectives and

related nosepieces. 5

21 ISO 16589-3:2011 Replace:

ISO 16589-3:2001

Rotary shaft lip-type seals incorporating

thermoplastic sealing elements - Part 3: Storage,

handling and installation.

9

22 ISO 16589-1:2011 Replace:

ISO 16589-1:2001


thermoplastic sealing elements - Part 1: Nominal

dimensions and tolerances.

13





























6

23 ISO 16589-4:2011

Replace: ISO 16589-4:2001


thermoplastic sealing elements - Part 4:

Performance test procedures.

15

24 ISO 16589-5:2011 Replace:

ISO 16589-5:2001


thermoplastic sealing elements - Part 5:

Identification of visual imperfections.

14

25 ISO 27065:2011

Protective clothing - Performance requirements

for protective clothing worn by operators applying

liquid pesticides.

18

26

ISO/IEC 13249-3:2011

Replace: ISO/IEC 13249-

3:2006

Information technology - Database languages -

SQL multimedia and application packages - Part

3: Spatial.

742

27 ISO/TS 17575-3:2011

Electronic fee collection - Application interface

definition for autonomous systems - Part 3:

Context data.

91

28 ISO/TS 13143-1:2011

Electronic fee collection - Evaluation of on-board

and roadside equipment for conformity to ISO/TS

12813 - Part 1: Test suite structure and test

purposes.

68

29 ISO/TS 13140-1:2011

Electronic fee collection - Evaluation of on-board

and roadside equipment for conformity to ISO/TS

13141 - Part 1: Test suite structure and test

purposes.

44


ISO 1352:1977

Metallic materials - Torque-controlled fatigue

testing. 23

31 ISO 15883-6:2011

Washer-disinfectors - Part 6: Requirements and

tests for washer-disinfectors employing thermal

disinfection for non-invasive, non-critical medical

devices and healthcare equipment.

7
















7

32

ISO/IEC 14443-3:2011


3:2001

Identification cards - Contactless integrated circuit

cards - Proximity cards - Part 3: Initialization and

anticollision.

60

33 ISO 15031-5:2011 Replace:

ISO 15031-5:2006

Road vehicles - Communication between vehicle

and external equipment for emissions-related

diagnostics - Part 5: Emissions-related diagnostic

services.

129


ISO 3720:1986 Black tea - Definition and basic requirements. 3

35 ISO 8255-1:2011 Replace:

ISO 8255-1:1986

Microscopes - Cover glasses - Part 1: Dimensional

tolerances, thickness and optical properties. 6

36

ISO/IEC 20000-1:2011


1:2005

Information technology - Service management -

Part 1: Service management system requirements. 26

37

ISO 14253-3:2011

Replace:ISO/TS 14253-

3:2002

Geometrical product specifications (GPS) -

Inspection by measurement of workpieces and

measuring equipment - Part 3: Guidelines for

achieving agreements on measurement uncertainty

statements.

12

38 ISO 14253-2:2011 Replace:

ISO/TS 14253-2:1999

Geometrical product specifications (GPS) -

Inspection by measurement of workpieces and

measuring equipment - Part 2: Guidance for the

estimation of uncertainty in GPS measurement, in

calibration of measuring equipment and in product

verification

71

39 ISO/IEC 13818-1:2007/Cor

3:2011

Corrections concerning VBV buffer size,

semantics of splice_type and removal rate from

transport buffer for ITU-T H.264 ISO/IEC 14496-

10 advanced video coding.

3






















8

40 ISO 14997:2011 Replace:

ISO 14997:2003

Optics and photonics - Test methods for surface

imperfections of optical elements 14

41 ISO 12153:2011

Welding consumables - Tubular cored electrodes

for gas shielded and non-gas shielded metal arc

welding of nickel and nickel alloys –

Classification.

9

42 ISO 18437-5:2011

Mechanical vibration and shock - Characterization

of the dynamic mechanical properties of visco-

elastic materials - Part 5: Poisson ratio based on

comparison between measurements and finite

element analysis.

13

43 ISO 29821-1:2011 Condition monitoring and diagnostics of machines

- Ultrasound - Part 1: General guidelines. 17

44 ISO 16175-2:2011

Information and documentation - Principles and

functional requirements for records in electronic

office environments - Part 2: Guidelines and

functional requirements for digital records

management systems.

61

45

ISO 10303-210:2011

Replace: ISO 10303-

210:2001

Industrial automation systems and integration -

Product data representation and exchange - Part

210: Application protocol: Electronic assembly,

interconnect, and packaging design.

400

46 ISO 10303-203:2011

Industrial automation systems and integration -

Product data representation and exchange - Part

203: Application protocol: Configuration

controlled 3D design of mechanical parts and

assemblies.

400

47 ISO 10241-1:2011

Replace:ISO 10241:1992

Terminological entries in standards - Part 1:

General requirements and examples of

presentation.

57















9

48 ISO 23269-3:2011

Ships and marine technology - Breathing

apparatus for ships - Part 3: Self-contained

breathing apparatus (safety equipment) required

by the IMO IBC and IGC Codes.

4

49 ISO 9328-1:2011 Replace:

ISO 9328-1:2003

Steel flat products for pressure purposes -

Technical delivery conditions - Part 1: General

requirements.

16

50 ISO 9328-7:2011 Replace:

ISO 9328-7:2004


Technical delivery conditions - Part 7: Stainless

steels.

49


ISO 2702:1992

Heat-treated steel tapping screws - Mechanical

properties. 6

52 ISO 9328-3:2011 Replace:

ISO 9328-3:2004


Technical delivery conditions - Part 3: Weldable

fine grain steels, normalized.

18

53 ISO 9328-5:2011 Replace:

ISO 9328-5:2004



fine grain steels, thermomechanically rolled.

15

54 ISO 9328-6:2011 Replace:

ISO 9328-6:2004



fine grain steels, quenched and tempered.

14

55 ISO 9328-4:2011 Replace:

ISO 9328-4:2004


Technical delivery conditions - Part 4: Nickel-

alloy steels with specified low temperature

properties.

13

Tiêu chuẩn IEC

TT Số hiệu

















10

01 IEC 60050-113 ed1.0 International Electrotechnical Vocabulary - Part

113: Physics for electrotechnology. 249

02 IEC 60512-8-2 ed1.0

Connectors for electronic equipment - Tests and

measurements - Part 8-2: Static load tests (fixed

connectors) - Test 8b: Static load, axial.

13

03 IEC 60512-8-3 ed1.0


measurements - Part 8-3: Static load tests (fixed

connectors) - Test 8c: Robustness of actuating

lever.

16

04 IEC 60512-9-4 ed1.0


measurements - Part 9-4: Endurance tests - Test

9d: Durability of contact retention system and

seals (maintenance, ageing).

12

05 IEC 60598-2-3-am1 ed3.0

Amendment 1 - Luminaires - Part 2-3: Particular

requirements - Luminaires for road and street

lighting.

8

06 IEC 60603-7-1 ed3.0

Connectors for electronic equipment - Part 7-1:

Detail specification for 8-way, shielded, free and

fixed connectors.

49

07 IEC 60728-6 ed3.0

Cable networks for television signals, sound

signals and interactive services - Part 6: Optical

equipment.

61

08 IEC 60745-2-13 ed2.1

Consol. with am1

Hand-held motor-operated electric tools - Safety -

Part 2-13: Particular requirements for chain saws. 69

09 IEC 60749-21 ed2.0 Semiconductor devices - Mechanical and climatic

test methods - Part 21: Solderability. 44

10 IEC/TR 61156-1-3 ed1.0

Multicore and symmetrical pair/quad cables for

digital communications - Part 1-3: Electrical

transmission parameters for modelling cable

assemblies using symmetrical pair/quad cables.

26

11

11 IEC 61850-4 ed2.0

Communication networks and systems for power

utility automation - Part 4: System and project

management.

74

12 IEC 62087-BD ed3.0

Methods of measurement for the power

consumption of audio, video and related

equipment.

102

13 IEC 62495 ed1.0

Nuclear instrumentation - Portable X-ray

fluorescence analysis equipment utilizing a

miniature X-ray tube.

19

14 IEC 62574 ed1.0 Audio, video and multimedia systems - General

channel assignment of multichannel audio. 25

15 IEC/TR 62627-03-01 ed1.0

Fibre optic interconnecting devices and passive

components - Part 03-01: Reliability - Design of

an acceptance test for fibre pistoning failure of

connectors during temperature and humidity

cycling: demarcation analysis.

18

16 ISO/IEC 13249-3 ed4.0

Information technology - Database languages -

SQL multimedia and application packages - Part

3: Spatial.

742

17 ISO/IEC 14443-3 ed2.0

Identification cards - Contactless integrated circuit

cards - Proximity cards - Part 3: Initialization and

anticollision.

60

18 ISO/IEC 20000-1 ed2.0 Information technology - Service management -

Part 1: Service management system requirements. 26

19 IEC 61850-SER ed1.0 Communication networks and systems in

substations - All Parts. 1850

Tiêu chuẩn ASTM

TT Số hiệu


12

01 ASTM A387/A387M Standard Specification for Pressure Vessel Plates,

Alloy Steel, Chromium-Molybdenum. 6

02 ASTM A1017/A1017M Standard Specification for Pressure Vessel Plates,

Alloy Steel, Chromium-Molybdenum-Tungsten. 3

03 ASTM D3715/D3715M Standard Practice for Quality Assurance of

Pressure-Sensitive Tapes. 6

04 ASTM D5264 Standard Practice for Abrasion Resistance of

Printed Materials by the Sutherland Rub Tester. 3

05 ASTM D5375/D5375M Standard Test Methods for Liner Removal at High

Speeds from Pressure-Sensitive Label Stock. 4

06 ASTM D6255/D6255M Standard Specification for Steel or Aluminum

Slotted Angle Crates. 19

07 ASTM D6295/D6295M Standard Test Method for Dispensability of Light-

Duty Pressure-Sensitive Film Tape. 4

08 ASTM D7298

Standard Test Method for Measurement of

Comparative Legibility by Means of Polarizing

Filter Instrumentation.

5

09 ASTM F1884 Standard Test Method for Determining Residual

Solvents in Packaging Materials. 7

10 ASTM F2391 Standard Test Method for Measuring Package and

Seal Integrity Using Helium as the Tracer Gas. 8

11 ASTM NACE/ASTMG193 Standard Terminology and Acronyms Relating to

Corrosion. 20

12 ASTM B374 Standard Terminology Relating to Electroplating. 9

13 ASTM B653/B653M Standard Specification for Seamless and Welded

Zirconium and Zirconium Alloy Welding Fittings. 3

14 ASTM B658/B658M Standard Specification for Seamless and Welded

Zirconium and Zirconium Alloy Pipe. 5

13

15 ASTM B678 Standard Test Method for Solderability of

Metallic-Coated Products. 5

16 ASTM B752

Standard Specification for Castings, Zirconium-

Base, Corrosion Resistant, for General

Application.

3

17 ASTM B884

Standard Specification for Niobium-Titanium

Alloy Billets, Bar, and Rod for Superconducting

Applications.

4

18 ASTM C539

Standard Test Method for Linear Thermal

Expansion of Porcelain Enamel and Glaze Frits

and Ceramic Whiteware Materials by

Interferometric Method.

6

19 ASTM D409/D409M Standard Test Method for Grindability of Coal by

the Hardgrove-Machine Method. 14

20 ASTM D906

Standard Test Method for Strength Properties of

Adhesives in Plywood Type Construction in Shear

by Tension Loading.

4

21 ASTM D950 Standard Test Method for Impact Strength of

Adhesive Bonds. 4

22 ASTM D1144 Standard Practice for Determining Strength

Development of Adhesive Bonds. 2

23 ASTM D1183 Standard Practices for Resistance of Adhesives to

Cyclic Laboratory Aging Conditions. 3

24 ASTM D1582

Standard Test Method for Nonvolatile Content of

Liquid Phenol, Resorcinol, and Melamine

Adhesives.

2

14

25 ASTM D1971

Standard Practices for Digestion of Water Samples

for Determination of Metals by Flame Atomic

Absorption, Graphite Furnace Atomic Absorption,

Plasma Emission Spectroscopy, or Plasma Mass

Spectrometry.

6

26 ASTM D2339


Adhesives in Two-Ply Wood Construction in

Shear by Tension Loading.

3

27 ASTM D3107 Standard Test Methods for Stretch Properties of

Fabrics Woven from Stretch Yarns. 5

28 ASTM D3164


Adhesively Bonded Plastic Lap-Shear Sandwich

Joints in Shear by Tension Loading.

4

29 ASTM D3776/D3776M Standard Test Methods for Mass Per Unit Area

(Weight) of Fabric. 5

30 ASTM D4338

Standard Test Method for Flexibility

Determination of Supported Adhesive Films by

Mandrel Bend.

3

31 ASTM D4680

Standard Test Method for Creep and Time to

Failure of Adhesives in Static Shear by

Compression Loading (Wood-to-Wood).

10

32 ASTM D5040 Standard Test Methods for Ash Content of

Adhesives. 2

33 ASTM D5113 Standard Test Method for Determining Adhesive

Attack on Rigid Cellular Foam. 2

34 ASTM D5824

Standard Test Method for Determining Resistance

to Delamination of Adhesive Bonds in Overlay-

Wood Core Laminates Exposed to Heat and

Water.

5

15

35 ASTM D6507 Standard Practice for Fiber Reinforcement

Orientation Codes for Composite Materials. 4

36 ASTM D7149 Standard Practice for Determining the Freeze

Thaw Stability of Adhesives. 2

37 ASTM F386 Standard Test Method for Thickness of Resilient

Flooring Materials Having Flat Surfaces. 3

38 ASTM F387 Standard Test Method for Measuring Thickness of

Resilient Floor Covering With Foam Layer. 3

39 ASTM F696 Standard Specification for Leather Protectors for

Rubber Insulating Gloves and Mittens. 4

40 ASTM F1674 Standard Test Method for Joint Restraint Products

for Use with PVC Pipe. 4

41 ASTM F2903

Standard Guide for Tissue Engineered Medical

Products (TEMPs) for Reinforcement of Tendon

and Ligament Surgical Repair.

7

42 ASTM G86

Standard Test Method for Determining Ignition

Sensitivity of Materials to Mechanical Impact in

Ambient Liquid Oxygen and Pressurized Liquid

and Gaseous Oxygen Environments.

19

43 ASTM G93

Standard Practice for Cleaning Methods and

Cleanliness Levels for Material and Equipment

Used in Oxygen-Enriched Environments.

22

44 ASTM G175

Standard Test Method for Evaluating the Ignition

Sensitivity and Fault Tolerance of Oxygen

Regulators Used for Medical and Emergency

Applications.

14

Tiêu chuẩn JIS

TT Số hiệu


16

01 JIS B 0001:2010 Replace:

JIS B 0001:2000 Technical drawings for mechanical engineering. 92


JIS B 1118:1995 Square head set screws. 5


JIS B 1173:1995 Studs. 9

04

JISA1302:1994/Amendment

1:2011 Replace: JIS A

1302:1994;

Method of fire test for noncombustible structural

parts of buildings (Amendment 1). 1

05

JISA1304:1994/Amendment


1304:1994

Method of fire resistance test for structural parts of

buildings (Amendment 1). 2

06

JIS

A1321:1994/Amendment


1321:1994

Testing method for incombustibility of internal

finish material and procedure of buildings

(Amendment 1).

1

07

JIS

A5513:2002/Amendment


5513:2001

Gabions (Amendment 1). 1

08 JIS B 1071:2010 Replace

JIS B 1071:2005

Fasteners - Methods of verification for size and

geometry. 41

09 JIS G 0404:2010 Replace

JIS G 0404:2009

Steel and steel products - General technical

delivery requirements. 21


JIS G 3115:2005

Steel plates for pressure vessels for intermediate

temperature service. 18


JIS G3125:2004

Superior atmospheric corrosion resisting rolled

steels. 11

http://www.webstore.jsa.or.jp/webstore/Com/FlowControl.jsp?lang=en&bunsyoId=JIS+A+1302%3A1994%2FAMENDMENT+1%3A2011&dantaiCd=JIS&status=1&pageNo=0










http://www.webstore.jsa.or.jp/webstore/Com/FlowControl.jsp?lang=en&bunsyoId=JIS+B+1071%3A2010&dantaiCd=JIS&status=1&pageNo=0

http://www.webstore.jsa.or.jp/webstore/Com/FlowControl.jsp?lang=en&bunsyoId=JIS+G+0404%3A2010&dantaiCd=JIS&status=1&pageNo=0



17


JIS G 3131:2005 Hot-rolled mild steel plates, sheet and strip. 11


JIS G 3302:2004 Hot-dip zinc-coated steel sheet and strip. 41


JIS G 3313:2004 Electrolytic zinc-coated steel sheet and strip. 54


JIS G 3444:2006 Carbon steel tubes for general structure. 16


JIS G 3445:2004 Carbon steel tubes for machine structure. 15


JIS G 3456:2008 Carbon steel pipes for high temperature service. 19


JIS G 3466:2006

Carbon steel square and rectangular tubes for

general structure. 15

19

JISG3552:2007/Amendment

1:2011 Replace JIS G

3552:2007

Chain link wire netting (Amendment 1). 1

20



3553:2007

Crimped wire cloth (Amendment 1). 1

21



3554:2007

Hexagonal wire netting (Amendment 1). 1

22



3555:2004

Woven wire cloth (Amendment 1). 1

23 JIS H 3250:2010 Replace

JIS H3250:2006 Copper and copper alloy rods and bars. 30








http://www.webstore.jsa.or.jp/webstore/Com/FlowControl.jsp?lang=en&bunsyoId=JIS+G+3552%3A2007%2FAMENDMENT+1%3A2011&dantaiCd=JIS&status=1&pageNo=0








http://www.webstore.jsa.or.jp/webstore/Com/FlowControl.jsp?lang=en&bunsyoId=JIS+H+3250%3A2010&dantaiCd=JIS&status=1&pageNo=0

18

24 JIS Q 10001:2010 Quality management - Customer satisfaction -

Guidelines for codes of conduct for organizations. 20

25 JIS Q 10003:2010

Quality management - Customer satisfaction -

Guidelines for dispute resolution external to

organizations.

38

26 JIS Q 9004:2010 Replace

JIS Q 9004:2000

Managing for the sustained success of an

organization - A quality management approach. 53

Thư viện Trường Đại học Công Nghiệp TP.HCM đã ký hợp đồng cung cấp thông tin trọn gói với

Trung tâm thông tin khoa học và công nghệ TP.HCM, toàn thể sinh viên, giảng viên và cán bộ nhân

viên trong trường có nhu cầu tra cứu thông tin vui lòng liên hệ:

Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM

Địa chỉ: 79 Trương Định - Q1 - TP.HCM

ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957

Website: www.sesti.gov.vn Email: [email protected]

Lưu ý

1/: Cung cấp thông tin miễn phí (chỉ thanh toán tiền photocopy và in) khi đến gửi yêu cầu thông tin,

nhớ mang theo thẻ sinh viên/thẻ học viên cao học hoặc/và thẻ giảng viên của trường.

2/ Nếu bạn đọc không thể đến Trung tâm thông tin khoa học và công nghệ TP.HCM - hãy gửi yêu cầu

thông tin cho Thư viện Đại học Công Nghiệp TP.HCM bằng 1 trong 2 cách:

Thông qua Cổng thông tin Thư viện: http://lib.hui.edu.vn hoặc:

Liên hệ: Thủ thư Phòng Nghiệp vụ - Thư viện Trường ĐH Công nghiệp TP. HCM.

ĐT: (08)38940390 (130)

Email: [email protected]

Thư viên Trương Đai hoc Công nghiêp Thanh phô Hô Chi Minh.

http://www.webstore.jsa.or.jp/webstore/Com/FlowControl.jsp?lang=en&bunsyoId=JIS+Q+10001%3A2010&dantaiCd=JIS&status=1&pageNo=0



http://www.sesti.gov.vn/

mailto:[email protected]

http://lib.hui.edu.vn/

mailto:[email protected]

ttiieeââuu cchhuuaaåånn kkhhooaa hhooïïcc...

Documents