motion

INTRODUCTIONVishay is one of the world’s largest manufacturers of discrete semiconductors and passive electronic com-ponents and is one of a respected echelon of component manufacturers whose reputation for reliability and quality is complemented by a decades-long record of service to the automotive industry.

TTI’s Transportation business serves all areas of the transportation and automotive markets including Au-tomotive Equipment, Agricultural Vehicles, Commercial Vehicles, Construction Equipment, Electric Motor-ized Vehicles, Marine and Recreational Vehicles. TTI can support you throughout the entire life cycle of your transportation products, from design and prototype to production, and allow you to reduce your time to market by calling upon the technical resources, experience, and logistics excellence that have made TTI the world’s leading specialist distributor for passive, connector, electromechanical and discrete compo-nents.  TTI, Inc. has more in stock inventory on Vishay products than any other distributor in the industry, and has the most knowledgeable customer service team available.

COMPONENTS FOR TRANSPORTATIONV I S H AY I N T E R T E C H N O LO GY, I N C .

European HeadquartersTTI, Inc.Ganghoferstr. 3482216 Maisach-GernlindenGermanyT: +49 (0) 81 42 66 80 0F: +49 (0) 81 42 66 80 490E: sales@de.ttiinc.comwww.ttieurope.com

Part NumberTECHNOLOGY

V I S H AY I N T E R T E C H N O LO GY, I N C .

VMN-MS6886-14042/4

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PRODUCT SHEET

Commercial Vehicles Agricultural, Construction, Truck & Bus• Pedal Position Controls / Steering Controls• Forklifts / Cranes

THE VISHAY ADVANTAGE

AEC Qualifications

Robust Design

High Reliability

Durability

Long Life

and more...

981 HE Throttle Position SensorNon-Contacting Technology: Hall Effect

• Accurate linearity down to: ± 0.5 %

• Designed for applications in harsh environments

• Spring-loaded types available

34 THEBushing Mount Hall Effect Sensor

• Accurate linearity down to ± 0.5 %

• Very long life: 50 M cycles for servo, 10 M cycles for bushing

• All electrical angles available up to 3600°

• Designed for applications requiring long life

P11/PE30 Potentiometers

• 12.5 mm and 19.7 mm single-turn panel controls

• Tested according to CECC 41000 or IEC 60393-1

• RoHS-compliant

• High power and versatile options

MM_/SMMProfessional Thin Film MELF Resistors

• Available from 0R1 to 15M

• TCR down to 25 ppm/K

• Unrivaled pulse load robustness

NTHS0603/ NTCS0603E3SMD NTC 0603 Chip Thermistor

• Tolerance R25 down to 1 %

• High-density monolithic construction with glass overcoat

• Wide operating temperature range: - 40 °C to + 125 °C

IHLP-6767GZ-5A Low-Profile, High-Current IHLP® Inductor

• Shielded construction

• Handles high transient current spikes without saturation

• High operating temperatures to +180 °C

101/102 PHR-STPower High Ripple Current Screw Terminal

• Long useful life: up to 15 000 h at 85 ºC and 400 000 h at 40 ºC

• Available in voltages from 25 V to 450 V; capacitance values from 220 µF to 1 000 000 µF

• Sizes up to 90 mm x 220 mm; standard and high-current terminals

S1G400 V, 1 A Standard Rectifier in SMA

• Glass-passivated chip technology

• Ideal for automated placement

• Meets MSL level 1

• RoHS-compliant

3KASMC24 3000 W Surface-Mount PAR® TVS

• Junction passivation optimized design passivated anisotropic rectifier technology

• TJ = 185 °C capability; suitable for high- reliability and automotive requirements

• 3000 W peak pulse power capability with a 10/1000 μs waveform

SQ4425EY- 30 V P-Channel in SO-8:0.012 Ω, 18 A 

• SO-8 - 30 V p-channel for any high-side load switch in automotive

• 175 °C maximum temperature

VLMW41R1T1 White LED in PLCC-2 Package Based on In-GaN Technology

• Typical color temperature: 5500 K

• Luminous intensity of 180 mcd to 450 mcd

• Operating temperature from 40 °C to 100 °C

VEMT3700High-Speed Phototransisitor in PLCC2 Package

• Spectral sensitivity from 450 nm to 1080 nm

• Half angle of sensitivity ± 60°

• Collector light current, typical, 0.5 mA with Ee = 1 mW/cm2

Part NumberTECHNOLOGY

V I S H AY I N T E R T E C H N O LO GY, I N C .

VMN-MS6886-14043/4

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PRODUCT SHEET

TNPW e3 SeriesHigh-Stability Thin Film Chip Resistors

• Low temperature coefficient and tight tolerances: ± 0.1 %, ± 10 ppm/K

• Excellent overall stability at different environmental conditions

• AEC-Q200 qualified

WSL…18 WSLPxxxxSMD, Power Metal Strip® Resistor

• Available in case sizes from 0603 to 2512

• Very high power ratings, from 0.2 W to 3 W, for SMD devices

• Very low resistance value range: 0.5 mΩ to 500 mΩ

IHTHxxxx

High-Current Through-HoleInductor

• High-temperature series

• Shielded construction

• Handles high transient current spikes without saturation

• Ultra-low buzz noise due to composite construction

IHLP-1616AB IHLP-4040DZ-5A IHLP-5050FDLow-Profile, High-Current IHLP® Inductor

• AEC-Q200 qualified

• Shielded construction

• Handles high transient current spikes without saturation

146 CTI125 °C, Low Impedance, High Ripple, SMD

• Soldering heat resistant according to IPC/JEDEC J-STD-020 (up to 260 ºC/40 s)

• Long useful life: up to 6000 h at 125 °C

• AEC-Q200 qualified

TH3SMD Tantalum Molded Case

• Automotive and industrial applications

• Operating temperature: up to 150 °C

• AEC-Q200 qualified

• 100 % surge current tested (B, C, D, E case sizes), RoHS-compliant

MKT1820Automotive Grade DC MKT Film Capacitor

• AEC-Q200 approved, automotive grade

• Maximum application temperature: 125 °C

• Maximum operating temperature for limited time: 150 °C

• Capacitance range: 1000 pF up to 15 µF

TCUT1300X01Dual Channel Transmissive Sensor

• Resolve direction and speed with dual channel transmissive (interrupter) sensor

• Wide gap of 3 mm; compatible with mechanical tolerances

SQJ409EP

40 V P-Channel PowerPAK® SO-8L: 0.0076 Ω, 60 A • AEC-Q101 qualified

• Low RDS(on) for reverse battery protection or HS driver

• 175 °C maximum temperature

MCW 0406 AT Professional and Pre-cisionWide Terminal Thin Film Chip Resistors

• Rated dissipation up to 300 mW

• Superior temperature cycling robustness

• Operating temperature: up to 175 °C for 1000 h

CRCW-HPPulse-Proof, High-Power Chip Resistor

• Combines high power ratings with small case sizes

• Superior anti-surge and pulse characteristics compared to standard resistors

Automotive /Sub-Systems• Engine Control / Heating / Steering• Braking and Safety / Transmission ECU• Comfort

THE VISHAY ADVANTAGE

AEC Qualifications

High-Temperature Performance

High Reliability

Low Profile

Long Life

and more...

SMxS24A PAR® Transient Voltage Suppressor

• Junction passivation optimized design passivated anisotropic rectifier technology

• TJ = 175 °C capability suitable for high reliability and automotive requirements

• Available in uni-directional polarity only

Part NumberTECHNOLOGY

V I S H AY I N T E R T E C H N O LO GY, I N C .

VMN-MS6886-14044/4

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PRODUCT SHEET

Electric / Hybrid Vehicles and EV Infrastructure• Main Inverters• Battery Management

THE VISHAY ADVANTAGE

AEC Qualifications

High-Temperature Performance

High Reliability

High-Voltage Performance

Transient-Voltage Capabilities

and more...

• Chargers• Converters / Boosters

WSBS8518Power Metal Strip® Battery Shunt Resistor

• 36 W power capability in 8518 size package

• Extremely low resistance of 50 µΩ to 1000 µΩ

• Features very low thermal EMF design and all-welded construction

D2TO35 Power Thick Film Resistor

• TO-263 standard package

• RoHS-compliant/high temperature capability

• High pulse capability up to 10 J short pulse

IHLP-8787 Low-Profile, High-Current Inductor

• High temperature, up to 155 °C

• Shielded construction

• Handles high transient current spikes without saturation

• High operating temperatures to +180 °C

RCL Long Side Termination Thick Film Resistor

• Higher power dissipation due to wider terminals

• Better ability to withstand temperature cycle test

MMB 0207 Professional and PrecisionMELF Resistors

• Advanced thin film technology

• Single pulse capability up to 3 kV or 1 kW

• Superior stability down to class 0.05

• Approved to EN 140401-803

LPS1100High-Power ThickFilm Resistor

• High power for small size: up to 1100 W at 25 °C

• Low weight: 83 g

• Non-inductive down to 1 µH

• High pulse capability up to 1000 J short pulse

K...V SeriesRadial Leaded MLCCs for Automotive

• Operating temperature from - 55 °C to + 160 °C

• Rated voltage of 50 V, 100 V, and 200 V

• Class 1 and class 2 ceramic

• Radial leaded

MKP1848S Low Profile DC-LinkCapacitor

• Slim design – low profile

• High CV product: 2 μF to 100 μF; 500 V to 1000 V

• Long useful life: > 100 000 h at UNDC and 70 °C

• High ripple current (up to 17.5 A)

159 PUL-SI105 ºC Power Long-Life Snap-in

• Long useful life: up to 5000 h at 105 °C with high ripple current

• Keyed polarity snap-in version available

• Special configurations for high vibration and automatic insertion available

SQJ431EP- 200 V P-Channel PowerPAK® SO-8L: 0.213 Ω, 12 A 

• 5 mm x 6 mm; ideal for antenna filtering or where high voltage is needed with automotive ruggedness and reliability

• 175 °C maximum temperature

5KASMC 5000 W Surface-Mount PAR® TVS

• Junction passivation optimized design passivated anisotropic rectifier technology

• TJ = 185 °C capability; suitable for high- reliability and automotive requirements

• Available in unidirectional polarity only

AU1PKLow-Profile, Surface-Mount Ultrafast Ava-lanche Rectifiers

• Very low profile: typical height of 1.0 mm

• Glass-passivated chip junction

• Ultrafast recovery times for high frequency