tt tool catalouge - trucktransmissions.com.au tool catalogue.pdf · zf assembly kit a1271 for use...

TOOL CATALOGUE

TT TOOL CATALOUGE TRUCK TRANSMISSIONS. KEEPS TRUCKS TRUCKING

1.5 Ton Transmission Jack A2045 • This set contains adjustable saddle brackets and chain, suited to every size of

transmission and differential. • Rust-proof with flashing chromed ram inside the hydraulic system. 360∘ rotary

handle. • Four swivel caster wheels make it easy to move under the vehicles. • Capacity : 1.5 tons

Clutch and Flywheel Jack A2273 • Spline shaft rotates 360 degrees, turns left and right for clutch and engine alignment.

2” and 1 3/4” spline shafts included. • Conveniently located release valve and 360 degree rotating pump handle allow jack

to be operated in any work position. • Open stance for ease of access to the work.


Stainless Professional Tool Box (7 Draws with 165 Tools) A1077.1 • All stainless construction. • All of the drawers are equipped with ball bearing rollers. • Non-slip pads for all draws. • 165 piece tool kit. Including screwdrivers, spanners, sockets etc • Size: 675mm x 460mm x 1100mm


Socket Tool Set (34 Piece) A2021

5pc 1/4" star-E socket: E4, E5, E6, E7, E8

4pc 3/8" star-E socket: E10, E12, E14, E16

2pc 1/2" star-E Socket: E18, E20

2pc 1/2" TORX bit socket:T55, T60

4pc 3/8" TORX bit socket:T40, T45, T47, T50

1pc 1/2" TAMPER. TORX bit socket: T55

3pc 3/8" TAMPER. TORX bit socket: T40, T45, T50

7pc 1/4" TORX bit socket:T8, T10, T15, T20, T25, T27, T30

6pc 1/4" TAMPER. TORX bit socket: T10, T15, T20, T25, T27,T30

Impact Hex & TX-Star Wrench Set (18 Piece) A2022

Hexagon: H5 H6 H7 H8 H10 H12 H14 H17

TX-STAR: T-30 T-40 T-45 T50 T55 T60 T70

1/2" 125mm extension bar

1/2" 250mm sliding T-handle

1/2" ratchet handle


Comprehensive Tool Kit (160 Piece) A2086

Combination wrenches

Hexkeys

1/4” Socket Set

3/8” Socket Set

Plus much more

1/4” & 1/2” Socket Set A2145

1/4” Socket 4mm-14mm

1/2” Socket 10mm-32mm

Sliding T handle

Extension bars, including flexible


Full Range of Scania Sockets A1090/B1090/C1090/D1090/F1090/G1090/C1125/C1126

A1090 3/4” 64mm (Nut 1525988/194484/184054)

B1090 3/4” 72mm (Nut 1461414/2094066)

C1090 3/4” 58mm (Nut 1461416)

D1090 3/4” 64mm (Nut 1461417/194894/315085)

F1090 3/4” 72mm (Nut 1461414/2094066)

G1090 3/4” 64mm (Nut 1338267)

C1125 1” 80mm (Front wheel nut)

C1126 1” 100mm (Rear wheel nut)

Roadranger Sockets B1320-070/B1320-7090

B1320-070 1” 70mm/2-3/4”

B1320-7090 1” 70mm/2-3/4” LONG


Hydraulic Bearing Puller (12 Ton) C2165

360 degree rotary socket.

Four stages of foldable & removable handle saves.

Easy release valve

Spring loaded live cantering nut for easy job removal.

Heavy duty carry case.

Heat treated forged alloy steel cross colts & manganous-phosphate plated jaws for long life service and rust proofing.


Bearing Puller A1120(-308/9/10/11/12)

Easy to use.

Strong and durable construction.

Heavy Duty carry case.

Contains pullers for bearing sizes 311/2/3/4/5

Additional attachments are available for bearing sizes 308/9/10


Differential Bearing Puller - European A1203

Designed for use on MAN and Mercedes-Benz Differentials.

Simple to use.

Heavy duty case.

ZF Assembly Kit A1271

For use on ZF Ecosplit Transmissions.

Specialist tools designed to make the job easier.

Heavy duty case.


Tiger Tool - Heavy Duty Uni Joint Puller TIGER.10102

World’s greatest and original Uni Joint Puller!

Engineering for use with up to a 1” impact wrench.

Eliminates dangerous vice and socket or hammering methods.

Does not damage the driveshaft, yokes, joints or bearing cups.

One piece unit – no bolts, cables or assembly required.

Spicer 1610, 1710, 1760, 1810, 1880, SPL140/170/250.

Meritor 16N, 17N, 18N, 1710, RPL20/25.

Tiger Tool - Intermediate Uni Joint Puller TIGER.10104




Spicer SPL90/100.


Tiger Tool - Automotive Uni Joint Puller TIGER.10105




Tiger Tool - SPL Bearing Cup Installer TIGER.10217

Installs bearing cups quickly and accurately.

Spicer SPL140/170/250.


Tiger Tool - Heavy Duty Yoke Puller TIGER.10803

Manufactured from high-grade steel for strength and durability.

Spicer and Meritor 1610, 1710, 1760, 1810.

Spicer SPL140/170/250.

Meritor RPL20/25.

Tiger Tool - Automotive Yoke Puller TIGER.10850

Manufactured from high-grade steel for strength and durability.

Black oxide finished coating resists corrosion.


Tiger Tool - Rockwell Hub Puller TIGER.10902

Forcing screw is manufactured from high-grade steel for strength and durability.

Black oxide finished coating resists corrosion.

Incorporates a bearing mounted stationary anvil, virtually eliminating torsional friction and resulting in increased pulling power.

Tiger Tool - Axle Shaft Puller TIGER.11001

Spring-loaded driver pin is case hardened and maintains direct contact with the centre of the axle flange.

Fully adjustable pulling arms and stud adapters are quick and easy to install.

Eliminates damage to axle studs.


Tiger Tool - Clutch Pilot Bearing Puller TIGER.11201

30mm bearing I.D.

Manufactured from high-grade metals for strength and durability.

Tiger Tool - Automotive Flange Style Yoke Puller TIGER.10851

Forcing screw is manufactured from high-grade steel for strength and durability.

Powder coated finish resists corrosion.

Tiger Tool - Uni Joint Puller Service Kit TIGER.20101

Features the necessary tools to service Unit Joints on everything from cars to highway application trucks.

Includes: o TIGER.10102 Heavy Duty Uni Joint Puller o TIGER.10104 Intermediate Uni Joint Puller o TIGER.10105 Automotive Uni Joint Puller o Traditional Bearing Cup Installer


Tiger Tool - Heavy Duty Uni Joint Service Kit TIGER.20150

Features the necessary tools to service Unit Joints virtually all heavy duty truck applications.

Includes: o TIGER.10102 Heavy Duty Uni Joint Puller o TIGER.10217 SPL Bearing Cup Installer o Traditional Bearing Cup Installer

Tiger Tool - Slack Adjuster Service Kit TIGER.20602

Specific-use slack adjuster pullers custom designed to fit all major brands of Manual and Automatic Self-Adjusting type slack adjusters.

Includes two brake clevis pin presses for quick removal of the clevis pins as the cotter pins are sheared off in the process.

Includes: o Manual Slack Adjuster Puller o Rockwell Slack Adjuster Puller o Gunite/Brunner/Bendix Slack Adjuster Puller o Haldex Slack Adjuster Puller (New Model) o Brake Clevis Pin Press o Slack Adjuster Rod Pin Press


Tiger Tool - Hydraulic Wheel Stud Service Kit TIGER.10608

Remove and install 10 studs in only 10-15 minutes.

Eliminates risk of damage to hubs, seals, wheel bearings and wheel studs.

10 tons of pressing power.

Rigid steel press frame.

Increased safety from accurate installations.

Interchangeable adapters for maximum flexibility.

Removal of the hub is not required.

Requires 10,000 PSI hydraulic pump.

Tiger Tool - Heavy Duty King Pin Press TIGER.90150

King Pins can now be removed in minutes with relative ease and efficiency.

Anti-torque arms prevent twisting of the main body while under extreme force.

Generates 20 tonnes of force.

Engineered for use with up to a 1” impact wrench.

tt tool catalouge - trucktransmissions.com.au tool catalogue.pdf · zf assembly kit a1271 for use...

Documents