tsunami® tsu-750 installation notes · tsunami® tsu-750 installation notes overview wiring...
TRANSCRIPT
SoundTraxx CurrentKeeper™Tsunami® TSU-750 Installation Notes
Wiring DiagramOverviewThis application note describes how to install a CurrentKeeper onto a Tsunami TSU-750 Digital Sound Decoder™.
Bill of MaterialsP.N. Description TSU-750 Digital Sound Decoder810140 CurrentKeeper
Tools You Will Need■ 25W Soldering Iron■ Rosin Core Solder■ Wire Strippers■ Wire Cutters■ Heat Gun or Blow Dryer
Installation1. Prepare the CurrentKeeper for installation: Using wire
cutters, trim the blue and black wires to about 3”.
2. Strip and tin the ends of the CurrentKeeper’s wires as well as the Tsunami’s blue (Function Common) and yellow-striped green wires.
3. Slide a piece of the black heat-shrink tubing (included) over each of the CurrentKeeper’s wires. Solder the blue CurrentKeeper wire to the blue decoder wire and the black CurrentKeeper wire to the yellow-striped green decoder wire. Slide the pieces of heat-shrink tubing over the connections and heat to insulate.
5. Secure in place with Kapton® tape (or equivalent) if desired.
Note: Once placed on the track, it will take about 2 minutes for the CurrentKeeper to be fully charged.
TSU-750
TSU-AT1000
TSU-BW1000Side A
Side B
TSU-GN1000
TSU-IM1000
TSU-KT1000Side A
Side B
TSU-1000
CurrentKeeper
CurrentKeeper
CurrentKeeper
CurrentKeeper
CurrentKeeper
CurrentKeeper
1
2
3
4
10
9
8
75 6
CurrentKeeper
Func
tion
Com
mon
Func
tion
Com
mon
141 Burnett Drive • Durango, CO 81301Phone: (970) 259-0690 • Toll Free: 888-789-7637 • Fax: (970) 259-0691
Email: [email protected] • Website: www.soundtraxx.com©2017 Throttle Up! Corp.All Rights Reserved