TSP100ECO

TSP100ECO

Star Environmental

STAR MICRONICS ECOLOGICAL INITIATIVE

PRODUCT CONCEPT

During the design and development of this product, Star has worked on every

aspect of the product life cycle from its manufacturing… An Advanced ECO Engineered Product

– Reduction in power consumption• Power consumption reduced during operation (Star Technology)• Power consumption reduction during non- operation (Energy Star)

– Due to its low energy consumption while idle it has been Energy Star Certified

– Less than 0.05 Watts in idle state– Materials of TSP100ECO

• Housing uses Environmental Friendly materials– Manufacturing of Printer

• Factory has reduction of Greenhouse Gas emissions• Star Micronics purchase of Carbon Offset Credits

To its field use and finally to its waste management Product Efficiency

– Reduce blank space (top margin)– Reduce length of receipt– Reduce paper width

NEW Packaging – Use of recyclable material

AN ADVANCED ECO ENGINEERED PRODUCT

Reduction in Power Consumption

The TSP100ECO satisfies the Low Power

Consumption Level for ENERGY STAR.

Less than 0.05 Watts in idle state

The power consumption at “Print Ready Mode” on

TSP100ECO is only 0.76 [W]!* Reference : TSP100U = 3.2

[W]

System Check Mode 1.8W

Print Ready Mode 0.76W

USB Plug In

Printing 34.0W

Yes

No

Is Host Powered OFF?

Yes

Is Host Powered ON?No

Yes

No

System Off Mode 0.05W

System Check Mode 1.8W1

* Not Zero Power Consumption

After 5 seconds

0.3 - 0.5 seconds

0.2　 seconds

Power-Saving Mode Transition Diagram

* Rolling ASCII Print*

Reduction in Power Consumption

Through Power Management

AN ADVANCED ECO ENGINEERED PRODUCT

Print Signal?

Reduction in Power Consumption

TSP100ECO vs. CompetitionConditions

[TIME] 24 hours/day [Cycle]7 days/Week

[Receipt Qty] 300 receipts/day [Length of Receipt]150 mm

PrinterTSP100ECO TSP143U TM-T88IV HSP7000 TM-H6000III

    +PS-180 +PS60A-24B +PS-180

Power Consumption kWh 36.7 143.5 61.4 151.2 136.1

CO2 CO2 Emission kg 15.4 60.3 25.8 63.5 57.2

TSP100ECO

TSP143U

TM-T88IV+PS-180

HSP7000+PS60A-24B

TM-H6000III+PS-180

36.7

143.5

61.4

151.2

136.1

Power Consumption (kWh)- (For 5 Years)

150

mm

[Note] CO2 calculation methods are different among countries.

In this table, it is calculated by Japanese method.

AN ADVANCED ECO ENGINEERED PRODUCT

Modification of Printer HousingThe Printer Housing of the new TSP100ECO is made of Polymer Alloy, a compound manufactured from Polystyrene (PS) and Polyphenylene Ether (PPE)

Environmental Significance Halogen-free ⇒ Reduction of Environmental Impact

No more Dioxin emission during the manufacturing process

Made with 10% of recycled material ( PS ) ⇒ Conservation of Resources

Light Resistance ⇒ no more color fading

New Housing Material to stress the emphasis of Star’s Environmental Consideration for use of Halogen-Free and

Recycled Material in the TSP100ECO printer.

AN ADVANCED ECO ENGINEERED PRODUCT

Reduce Blank space• Capability of changing the top margin from 11mm to 3mm in 1mm

increments (default setting is 3mm)• With Partial Cut only using back feed

Savings on Paper Consumption

11 mm 3 mm

PRODUCT EFFICIENCY

PRODUCT EFFICIENCY

75 %

Com

pre

ss

50 %

Com

pre

ss50

% C

omp

ress

67 % Compress

100

%

Paper Saving of 50% when utilizing vertical 50% compression

Paper Saving increased when using 3mm top margin + vertical 50% compression

Paper Saving increased additional 33% when using 53mm paper from 80mm paper

Capability of Vertical and Horizontal Receipt Compression• Vertical : 100% · 75% · 50%• Horizontal : 100% · 67%

PRODUCT EFFICIENCY

Configuration Utililtyo Eco Settings

• Scaling (Compress)• Horizontal• Vertical

• Top Margin• 11mm to 3mm

Capability to Choose if a Receipt is to

be printed

If yes, the receipt is printed

If no, the receipt is not printed, BUT the

Receipt can be saved in the PC Hard Drive

This function is available with OPOS

and JavaPOS for Windows, as well.

Instant paper savings when thereceipt is not printed!

PRODUCT EFFICIENCY

PRODUCT EFFICIENCY

Configuration Utililtyo Eco Settings

• “On Demand”

ECO Analysis ToolUsers can simulate Money-Save-Effect by paper saving.* This tool is only for calculation of Paper Savings, not for Power Savings, as the “Money-Savings-Effect” by Power Savings may be perceived as small.

* Working daysDefault :

365

* Receipts per dayMax :

10,000

* Receipt Length Max :

1,000 mm

* Monetary Unit

JPY

USD

HKD

MYR

CNY

GBP

EUR

AUD

* Top margin 3 to 11

mm

* Paper width used 58 or 80

mm

* Receipt length reduction

Original25%

reduction50%

reduction

How many receipts do you print and just how much paper could you save?

PRODUCT EFFICIENCY

14

SAMPLE PAPER ROLL 80mm

6 FT. POWER CABLE

• USB CABLE• VERTICAL MOUNT ACCESSORY• 58 MM ROLL PAPER GUIDE • UPPER GUIDE

WALL BRACKET KIT

NEW PACKAGING

INSTALLATION CD and FUTUREPRNT software

ALL IN ONE BOX!

FUTUREPRNT SOFTWARE INCLUDED

WHQL Certified - Certified by Microsoft® for effortless installation

ESC/POS™ Emulation - Easy drop-in replacement

2D Bar Code Printing - 2D bar codes store more information than traditional

1D types and replicate the data multiple times for better scanning reliability.

QR Code is supported.

Maintenance Counter Status - Keep track of how many times the auto cutter

has cut and the distance that the print head has printed for hardware

performance measurable

Two Color Printing Capability - Highlight important information

Logo Utility - Store logos and other graphics for professional receipt branding

Memory Switch Utility - Fine-tune your print outs or print in different

languages by enabling, changing, or disabling certain settings

CARBON OFFSET

For every TSP100ECO printer manufactured, Star Micronics purchased Carbone Emission Credit equal to the printer manufacturing and operation for the first 5 years.

“Carbon offsetting is the act of counterbalancing unavoidable CO2 emissions from your daily life or economic activities by supporting the CO2 reduction projects conducted globally”

Amount of CO2 Offset per unit: Total 33.9 kg / unit(* From Manufacturing & disposal process : 11.9 Kg / From Power consumption for 5 years : 22.0 kg)

CO2 OFFSET PROCESS

TSP100ECO USER PARTICIPATIONIN CO2 REDUCTION CAMPAIGN

FOR the END USER TO Display to their customers – they are participating inSAVING the ENVIRONMENT

TSP100II VS TSP100

Printer Speed is now 28RPM from 22 RPM

TSP100ECO available with CUTTER (Partial Cut only)

NO TEAR BAR VERSION

PUTTY OR CHARCOAL GRAY COLOR

USB INTERFACE

Best product e

ver needs th

e

best warra

nty ever!

First y

ear has a Swap-A-Star

+ 4 year full w

arranty (c

utter

and Print h

ead included)

TSP100II VS TSP100

Warranty on the TSP100ECOFull 3 Year Warranty (Print Head & Cutter included)

Complimentary Swap-A-Star on 1st Year

Complimentary Extend-A-Star on Year 2, 3 & 4

Upper Guide – Installation required for

Vertical Orientation of Printer

TSP100ECO – PRINTER OPERATIONS

Note : Upper Guide for TSP100ECO is not compatible with Upper Guide for previous TSP100 Series.

• XML file which was created for current TSP100 Series can be used with TSP100ECO

• When the USB cable is connected to host, Plug & Play will work. The AC (Power) Cable does not have to be connected.

TSP100ECO – PRINTER OPERATIONS

TSP100ECO – PRINTER OPERATIONS

Print Speed is 150mm/sec Print Speed has been improved compared with TSP100U (125 mm/s).

No Power Switch Printer automatically goes into System-Off-Mode (0.07W), when host is shut down. Self-Print instructions:

1.Connect Power Cable 2. Connect ONE USB Plug

3. Hold FEED Button DOWN

4. Connect OTHER USB Plug

TSP100ECO SPECIFICATIONS

Printer Specifications

[1] Print Method Direct Line Thermal Printing

[2] Print Resolution 8 x 8 dots / 203 dpi

[3] Print Speed 28 RPM

[4] Paper Feed Speed Up to 150 mm per second

[5] Printable Width Max. 72 mm

[6] Top Margin 3 mm – 11 mm (Default 3 mm)

[7] Paper Sensors PE sensor

[8] Auto-Cutter Partial cut (Guillotine)

[9] Min. Cut Length 24 mm

[10] Auto-Cutter Life 1 million cuts

[11] Print Head Life Max. 100 million pulse / 100 Km (using recommended paper)

[12] Reliability 60 million lines MCBF

[13] Dimensions 142 (W) x 204 (D) x 132 (H) mm

[14] Weight 1.72 kg

[15] Power Supply Internal (100V – 240V)

[16] Power Consumption [System Off] 0.05 W [System Check] 1.8 W [Printing] 34W

TSP100ECO SPECIFICATIONS

Paper Specifications

[1] Width 80 mm / 58 mm

[2] 2 Color Printing Special thermal paper required

[3] Thickness 0.065 ~0.085mm

[4] Roll Diameter Max 83 mm

Software

[1] Emulations Star Line Mode & ESC/POS

[2] Code Pages 40 pages

[3] Interface USB only

[4] Interface Options N/A

[5] Drivers Windows, Linux, OPOS, JPOS, Mac,

THE END