tsc electronics - unp · 2019. 8. 5. · z mb1206-190 1000 (Ω) 100 10 1 1 10 100 1000 frequency...

TS

C E

lect

roni

cs

R

Contacting Us

For quotations, orders, or inquiries, call usdirectly between 8 am to 5 pm PacificStandard Time.

Fax us quotations, orders, or inquiries 24hours a day. We will respond to all faxeswithin the next business day.

Email quotations, orders, or inquiries 24hours a day. We will respond to all emailswithin the next business day.

Send all mail inquiries to:

TSC Electronics, Ltd.1610 Lockness PlaceTorrance, CA 90501USA

Contact your local sales representative.

Telephone (310) 534-2738

Fax (310) 534-3216

email: [email protected]

Local Sales Office

Mailing Address

Custom Designs?We welcome all custom designs.

We will work with you to devleop

the exact solution you need.

TSC Electronics, Ltd. Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.com i

For a free disk call310-534-2738

R

Electronic

Catalog

TSC Electronics, Ltd. Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.comii

TSC Electronics, Ltd. makes no representation that the use ofthe circuits described herein will not infringe on existing or futurepatent rights, nor do the descriptions contained herein imply thegranting of licenses to make, use or sell equipment constructedin accordance therewith.

©1997, by TSC Electronics, Ltd. All rights reserved. This book,or any part or parts thereof, must not be reproduced in any formwithout permission of the copyright owner.

NOTE: The information presented in this book is believed to beaccurate and reliable. TSC Electronics, Ltd. reserves the right tomake changes to the products contained herein to improveperformance, reliability, or manufacturability. However, noresponsibility is assumed by TSC Electronics, Ltd.

Table of Contents

Magnetics

MB Series - Ferrite Chip EMI Suppressors

ML Series - Multilayer Chip Inductors

HL Series - Multilayer Chip Inductors

CM Series - Molded Chip Inductors

D300 Series - SMT Power Inductors

T200 Series - Surface Mount Toroids

T410 Series - SMT Power Inductor/Transformers

B100 Series - Balun Transformers

MC Series - Molded Leaded Inductors

EC Series - Coated Leaded Inductors

PC Series - Power Line Chokes

FC Series - Flat Coil Inductors

VL Series - Variable Inductors

WBC Series - Wide Band Chokes

LBC Series - Leaded Bead Chokes

D100 Series - Power Line Chokes

D200 Series - Fixed Inductors

T100 Series - Toroids

T300 Series - Current Sensors

Custom Magnetics

1-3

1-14

1-20

1-24

1-26

1-35

1-37

1-38

1-39

1-41

1-43

1-44

1-45

1-47

1-48

1-49

1-52

1-54

1-55

1-56

TSC Electronics, Ltd . Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.com iii

About TSC

In 1980, TSC Electronics, Limited was established as adivision of a major Taiwan film capacitor company with thesole purpose of producing film capacitors and inductors.

Today, after years of experience, dedication, commitment toquality, and progress, this small division has grown into alarge manufacturer of passive components with factories andoffices in three countries.

Our product line includes: high precision and commercialgrade film capacitors, surface mount chip ferrite beads,surface mount inductors and transformers, and leadedchokes, coils and transformers.

With our expertise in manufacturing, equipment design, andcost competitive processes, our aim is to provide highquality, innovative products and services to meet ourcustomers' requirements. Our customers' needs are alwaysour first priority.

R

TSC Electronics, Ltd. Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.com v

MAGNETICS

MB Series Surface Mount Chip EMI Suppressorsn

SMT Chip EMI SuppressorsR

1-3TSC Electronics, Ltd. Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.com

PACKAGING QUANTITIES

T(178mm[7.008 inches] reel dia.)

4000 pcs/reel

4000 pcs/reel

2000 pcs/reel

2000 pcs/reel

2000 pcs/reel

1000 pcs/reel

SizeCode

MB0603

MB0805

MB1206

MB1210

MB1806

MB1812

ImpedanceRange

Circuit Page

80 ~ 300

11 ~ 1000

19 ~ 1000

31 ~ 60

80 ~ 150

70 ~ 1500

1-4

1-4

1-6

1-6

1-8

1-8

MB0603

MB0805

MB1206

MB1210

MB1806

MB1812

SeriesDescription

Chip EMISuppressors

General Specifications

Impedance Range:Storage Temp:Operating Temp:Resistance to Solder Heat:Resistance to Solvent:

7 Ohms to 1000 Ohms-40°C to + 85°C-25°C to + 85°C260°C, 10 SecondsPer MIL-STD-202F

B

AChip Bead Solder Land

C

RECOMMENDED PRINTED CIRCUIT BOARD PATTERNS

B

0.028 inches

0.039 inches

A

0.028 inches

0.039 inches

SolderResist

Pattern

C

0.071 ~ 0.079 inches

0.118 ~ 0.157 inches

MB0603

MB0805

RSurface Mount Chip EMI Suppressors

MB0603, MB0805 Series

1-4 TSC Electronics, Ltd. Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.com

MB0805-110

MB0805-121

MB0805-301

MB0805-601

MB0805-102

MB0603-800

MB0603-121

MB0603-301

ImpedanceZ ( ) ± 25%at 100MHZ

ΩResistanceRdc. Max.

( )Ω

RatingCurrent Max

(mA)

11

120

300

600

1000

0.1

0.18

0.50

0.50

0.8

300

300

200

200

100

Part NumberDescription

.032"±.012

.032"±.012

.024"±.008 FerriteExternal Electrode

.063"±.006

.05"±.008

.036"±.008

.024"±.008

FerriteExternal Electrode

.08"±.008

80

120

300

0.2

0.2

0.35

250

150

150


MB0603, MB0805 Series • Impedance vs. Frequency Curves

1000

1000(Ω)

100

10

11 10 100

Frequency (MHz)

XL

R

Z

MB0805-121

1000

1000(Ω)

100

10

11 10 100

XL

R

Z

MB0805-110

Frequency (MHz)

1000(Ω)

100

10

11 10 100 1000

Frequency (MHz)

XLR

Z

MB0805-301

100

1000(Ω)

10 100 1000Frequency (MHz)

XLR

Z

10

11

MB0805-60110000

(Ω)

1000

100

101 10 100 1000

Frequency (MHz)

XLR

Z

MB0805-102

1000(Ω)

Frequency (MHz)

100

10

11 10 100 1000

Z

XL

R

MB0603-8001000(Ω)

100

10

11 10 100 1000

Frequency (MHz)

Z

R

XL

MB0603-1211000(Ω)

100

10

11 10 100 1000

Frequency (MHz)

XL

R

Z

MB0603-301



MB1206, MB1210 Series • Surface Mount Chip EMI Suppressors

n




B


C


B

0.079 inches

0.079 inches

A

0.047 inches

0.047 inches

SolderResist

Pattern

C

0.165 ~ 0.205 inches

0.165 ~ 0.205 inches

MB1206

MB1210




( )Ω

RatingCurrent Max

(mA)

31

60

.05

.05

3000

3000

MB1210-310

MB1210-600


.064"±.008

.043"±.008

.024"±.008


.126"±.008

.10"±.008

.052"±.008

.024"±.008


.126"±.008

MB1206-190

MB1206-310

MB1206-520

MB1206-700

MB1206-151

MB1206-601

MB1206-102

19

31

52

70

150

600

1000

.04

.04

.05

.05

0.2

0.5

0.5

3000

3000

3000

3000

1000

1000

200



1000(Ω)

100

10

11 10 100 1000

Frequency (MHz)

XL

R

Z

MB1210-600

1000(Ω)

100

10

11 10 100 1000

Frequency (MHz)

XL

R

Z

MB1206-190

1000(Ω)

100

10

11 10 100 1000

Frequency (MHz)

XL

R

Z

MB1206-1511000(Ω)

100

10

11 10 100 1000

Frequency (MHz)

XL

R

Z

MB1206-601

Frequency (MHz)

10000(Ω)

1000

100

10

1 10 100 1000

XL

R

Z

MB1206-102


MB1206-520100(Ω)

10

1

1 10 100 1000Frequency (MHz)

XL

R

Z

1000(Ω)

100

10

11 10 100 1000

Frequency (MHz)

XL

R

Z

MB1210-310

1000(Ω)

100

10

1

1 10 100Frequency (MHz)

XL

RZ

MB1206-700

1000

MB1206-3101000(Ω)

100

10

11 10 100 1000

Frequency (MHz)

XL

R

Z


MB1806, MB1812 Series • Surface Mount Chip EMI Suppressors





B


C


B

0.118 inches

0.118 inches

A

0.047 inches

0.047 inches

SolderResist

Pattern

C

0.217 ~ 0.256 inches

0.217 ~ 0.256 inches

MB1806

MB1812



( )Ω

RatingCurrent Max

(mA)

80

100

150

70

120

125

1500

0.1

0.1

0.3

0.1

0.1

0.1

0.05

6000

6000

6000

6000

6000

6000

6000

MB1806-800

MB1806-101

MB1806-151

MB1812-700

MB1812-121

MB1812-131

MB1812-152


.126"±.008

.06"±.008

.024"±.008


.180"±.008

.063"±.008

.063"±.008

.024"±.008 FerriteExternal Electrode

.180"±.008



1000(Ω)

100

10

11 10 100 1000

Frequency (MHz)

XL

R

Z

MB1806-8001000(Ω)

100

10

1


XL

R

Z

MB1806-101

1000(Ω)

100

10

1


XL

R

Z

MB1812-121

Frequency (MHz)

1000(Ω)

100

10

1

1 10 100 1000

XL

R

Z

MB1812-700

1000(Ω)

100

10

11 10 100 1000

Frequency (MHz)

XL

R

Z

MB1806-151


10000(Ω)

1000

100

10


XL

R

Z

MB1812-152

MB1812-1311000(Ω)

100

10

1


XL

R

Z

Operating temperature range

Storage temperature andhumidity ranges

Soldering heat resistance

Solderability

Pull strength

Low temperaturestorage life test

Preheat: 150 C, 60 secondsSolder: H63ASolder temperature: 260 +/- 5 CFlux: ResinDip time: 10 +/- 0.5 seconds

Preheat: 150 C, 60 secondsSolder: H63ASolder temperature: 230 +/- 5 CFlux: RosinDip time: 4 +/- 1 seconds

After soldering a lead wire to a terminal electrode, apply atensile force, T, in the direction shown.

Temperature: -40 +/- 2 CTesting time: 1008 +/- 12 hoursMeasurement taken after placing for 24 hours minimum.

-25 to +85 C

40 C max., 70% RH max.

No cracking of the chip may occur.Solder must cover greater than 75% of the totalsurface area of the terminal electrode.Impedance must be within +/- 20% of the initialvalue.

New solder must cover greater than 90% of thetotal surface area of the terminal electrode.

The terminal electrode and the ferrite shall not bedamaged by the tensile forces applied by theconditions shown.

Chipping, cracking or any other physical defectswhich are harmful to the electrical characteristicsshall not be allowed.Impedance must be within +/- 20% of the initialvalue.

Dipping Natural cooling

60 seconds 10 +/- 0.5 seconds

260 C

150 C

Dipping Natural cooling

60 seconds 4 +/- 1 seconds

230 C

150 C

T (N)


Performance and Test Conditions

Criteria Performance Parameters


Size Code

MB0603

MB0805

MB1206

MB1210

MB1806

MB1812

T (N)

4.9

5.9

9.8

9.8

9.8

14.7

High TemperatureResistance

Humidity Resistance

Thermal Shock

Flexural strength After soldering a chip to the center of a test substrate,deflect the midpoint of the substrate by 2mm (0.079 inches)and allow it to return to the initial position.Soldering shall be done in accordance with therecommended PC board pattern and reflow soldering.

The terminal electrode and the ferrite shall not bedamaged by the forces applied by the conditionsshown.

40[1.575]

100 [3.937]

Glass epoxy PC board.

1[0.039]

10 [0.394]

Deflection

20[0.787]

Radius = 10 [0.394]

45 [1.772]45 [1.772]

Load

Temperature: 85 +/- 2 CApplied current: Rated current (maximum value)Testing time: 1008 +/- 12 hoursMeasurement taken after placing for 24 hours minimum.

Humidity: 90 to 95% RHTemperature: 40 +/- 2 CApplied Current (maximum value)Testing time: 1008 +/- 12 hoursMeasurement taken after placing for 24 hours minimum.

Temperature: -40 C, +85 C, kept steady for 30 minutes each.Cycle: 100 cycles

Measurement takenafter placing for 24 hoursminimum.

24 hours

24 hours

85 C

40 C

1008 hours

1008 hours

Roomtemperature

Roomtemperature

The physical appearance of the ferrite shall not bedamaged.Impedance must be within +/- 20% of the initialvalue.

The physical appearance of the ferrite shall not bedamaged.Impedance must be within +/- 20% of the initialvalue.

Chipping, cracking or any other physical defectswhich are harmful to the electrical characteristicsshall not be allowed.Impedance must be within +/- 20% of the initialvalue.

30 minutes30 minutes

85 C

Roomtemperature

-40 C


Performance and Test Conditions

Criteria Performance Parameters


Fig. 1

A +/- 0.1 [0.004]

B +/- 0.1 [0.004]

2 +/- 0.05[0.079 +/- 0.002]

1.75 +/- 0.1[0.069 +/- 0.004]

3.5 +/- 0.05[0.138 +/- 0.002]

4 +/- 0.1[0.157 +/- 0.004]

1.1 +/- 0.05[0.043 +/- 0.002]

1.5 +0.1, -0[0.472 +0.008, -0]

4 +/- 0.1[0.157 +/- 0.004]

t +/- 0.05 [0.002]

T +/- 0.05 [0.002]

8 +/- 0.2[0.315 +/- 0.008]

Fig. 2

B +/- 0.1 [0.004]

1.75 +/- 0.1[0.069 +/- 0.004]

5.5 +/- 0.05[0.217 +/- 0.002]

4 +/- 0.1[0.157 +/- 0.004]

A +/- 0.1 [0.004] 1.6 +/- 0.1[0.063 +/- 0.004]

1.5 +0.1, -0[0.472 +0.008, -0]

8 +/- 0.1[0.315 +/- 0.004]

t +/- 0.05 [0.002]

T +/- 0.05 [0.002]

12 +0.2, -0[0.472 +0.008, -0]

2 +/- 0.05[0.079 +/- 0.002]

Drawing direction

500 to 560 [19.685 to 22.047]

LeaderBlank

440 [17.323]

Blank

(10 to 20pitches)

Chips

Dimensions in mm [inches].

T

1.1[0.043]

1.2[0.047]

1.4[0.055]

1.7[0.067]

1.8[0.072]

2.05[0.081]

t

0.3[0.012]

0.3[0.012]

0.3[0.012]

0.3[0.012]

0.3[0.012]

0.3[0.012]

B

1.9[0.075]

2.3[0.091]

3.5[0.138]

3.6[0.142]

4.9[0.193]

4.9[0.193]

A

1.1[0.043]

1.55[0.061]

1.9[0.075]

2.9[0.114]

1.9[0.075]

3.6[0.142]

Fig.

1

1

1

1

2

2

SizeCode

MB0603

MB0805

MB1206

MB1210

MB1806

MB1812

TAPE DIMENSIONSRev. 97001


Tape Dimensions



Cross Reference Guide

0603,0603,0603,0603,0603,0603,0603,0603,0603,0603,0603,0603,0603,0603,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,0805,1206,1206,1206,1206,1206,1206,1206,1206,1206,1206,1206,1206,1206,1266,1210,1210,1210,1210,1210,1210,1210,1210,1210,1806,1806,1806,1806,1806,1806,1806,1812,1812,1812,

6875

120140220240300420470600750

100015001800

57

1011

11 , hc121517223347567580

100120200240400430470600750

1000150018002200

1919 , hc

2626 , hc

3131W, hc

607090

100150600

10007031

31 , hc525560

60 , hc65

80 , hc100

456880

100105150170

70120125

ΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩ

ΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩΩ

ΩΩ

ΩΩ

ΩΩΩΩΩΩΩΩΩ

ΩΩΩΩ

ΩΩ

ΩΩΩΩΩΩΩΩΩΩΩΩ

MB0603-680MB0603-750MB0603-121MB0603-141MB0603-221MB0603-241MB0603-301MB0603-421MB0603-471MB0603-601MB0603-751MB0603-102MB0603-152MB0603-182MB0805-050MB0805-070MB0805-100MB0805-110MB0805-110MB0805-120MB0805-150MB0805-170MB0805-220MB0805-330MB0805-470MB0805-560MB0805-750MB0805-800MB0805-101MB0805-121MB0805-201MB0805-241MB0805-401MB0805-431MB0805-471MB0805-601MB0805-750MB0805-102MB0805-152MB0805-182MB0805-222MB1206-190MB1206-190MB1206-260MB1206-260MB1206-310MB1206-310MB1206-600MB1206-700MB1206-900MB1206-101MB1206-151MB1206-601MB1206-102MB1266-700MB1210-310MB1210-310MB1210-520MB1210-550MB1210-600MB1210-600MB1210-650MB1210-800MB1210-101MB1806-450MB1806-680MB1806-800MB1806-101MB1806-1050MB1806-151MB1806-171MB1812-700MB1812-121MB1812-131

BLM11B750DBLM11A121SBLM11B141DBLM11A221S

BLM11B421S

BLM11A601S

BLM11B102S

BLM21B050S

BLM21A121SBLM21B201S

BLM21A401S

BLM21A601SBLM21B751SBLM21A102S

BLM21B222S

BLM31A206S

BLM31A700S

BLM31A601S

BLM41A400S

BLM41A151S

ACB1608M-120

ACB1608M-300

HF30ACB201209HF70ACB201209HF50ACB201209HF50ACC201209

HF30ACB321611HF30ACC321611HF70ACB321611HF70ACC321611HF50ACB321611HF50ACC321611

HF30ACB322513HF50ACC322513HF70ACB322513

HF50ACB322513HF50ACC322513

HF30ACB453215HF70ACB453215HF50ACB453215

25Z0805.0S0

25Z0805-1S0

25Z1206.0S0

25Z1206.1S0

25Z1210.0S0

25Z1806-1S0

25Z1806.0S0

25Z1812.0S0

BCB-0805

KCB-0805

LCB-0805

DCB-1206

ACB-1206

BCB-1206

KCB-1206

ACB-1210

BCB-1210

ACB-1806BCB-1806

KCB-1806

ACB-1812BCB-1812

BK 1608 LL 680

BK 1608 HS 241

BK 1608 HM 471BK 1608 HS 601BK 1608 LM 751BK 1608 HM 102BK 1608 LM 152BK 1608 LM 182

BK 2125 HS 150

BK 2125 HS 220BK 2125 HS 330BK 2125 HS 470BK 2121 LL 560BK 2121 HS 750

BK 2125 HS 101BK 2125 HS 121

BK 2125 HS 241

BK 2121 HS 431BK 2125 HM 471BK 2125 HS 601

BK2125 HM 102BK2125 LM 152BK2125 LM 182

Description TSC Murata TDK DW Steward ACT Taiyo Yueden



Inductance Range:Storage Temp:Operating Temp:Resistance to Solder Heat:Resistance to Solvent:

0.047 uH to 4.7 uH-40°C to + 85°C-20°C to + 85°C260°C, 10 SecondsPer MIL-STD-202F

ExternalElectrode

Ferrite

W

TL

E

Size Code

ML0603

L

.064"±.008

Dimensions

W

.032"±.008

T

.032"±.008

E

.012"±.008

ML0603 Series

Multilayer Chip InductorsR

Specifications are subject to change without notice.

ML0603 Series

ML0603-47NML0603-68NML0603-82NML0603-R10ML0603-R12ML0603-R15ML0603-R18ML0603-R22ML0603-R27ML0603-R33ML0603-R39ML0603-R47ML0603-R56ML0603-R68ML0603-R82ML0603-1R0ML0603-1R2ML0603-1R5ML0603-1R8ML0603-2R2ML0603-2R7ML0603-3R3ML0603-3R9ML0603-4R7

Part No.Inductance

(µH)InductanceTolerance

QMin.

TestFreq.L, Q

(MHz)

Self-resonantFrequency(MHz) Min.

DC Resistance( ) Max.Ω

RatedCurrent

(mA)Max.

0.0470.0680.0820.100.120.150.180.220.270.330.390.470.560.680.821.01.21.51.82.22.73.33.94.7

±20%±20%±20%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%

101010151515151515151515151515353535353535353535

505050252525252525252525252525101010101010101010

260250245240205180165150136125110105959085756560555045403533

0.30.30.30.50.50.60.60.80.80.8511.351.551.72.10.60.80.80.951.151.351.551.72.1

505050505050505050353535353535252525251515151515

TSC Electronics, Ltd. Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.com1-14

R

ML0603 Series • Performance Curves

100

10

1

0.1

0.011 5 10 50 100 500

DC current (mA)

Indu

ctan

ce (

µH

)

INDUCTANCE vs. DC SUPERPOSITIONCHARACTERISTICS

Test equipment: LCR meter 4291A

22µH

8.2µH

1.0µH

0.68µH

100

10

1

0.1

0.011 5 10 50 100 500

DC current (mA)

Indu

ctan

ce (

µH

)

IMPEDANCE vs. FREQUENCYCHARACTERISTICS

Test equipment: Impedance analyzer 4291A

1000

0.68µH8.2µH

1.0µH22µH

INDUCTANCE vs. TEMPERATURECHARACTERISTICS


10

5

0

-5

-10

+25 +50 +850-25

1.0µH8.2µH

0.68µH22µH

1.0µH8.2µH

0.68µH22µH

Temperature (°C)

∆L/L

(%)

Q vs. FREQUENCY CHARACTERISTICS

80

60

40

20

00.1 0.5 1 5 10 50 100 500 1000

Frequency (MHz)


Q

0.68µH

8.2µH1.0µH

22µH


Multilayer Chip Inductors

ML0805 Series



ML0805 Series

ML0805-47NML0805-68NML0805-82NML0805-R10ML0805-R12ML0805-R15ML0805-R18ML0805-R22ML0805-R27ML0805-R33ML0805-R39ML0805-R47ML0805-R56ML0805-R68ML0805-R82ML0805-1R0ML0805-1R2ML0805-1R5ML0805-1R8ML0805-2R2ML0805-2R7ML0805-3R3ML0805-3R9ML0805-4R7ML0805-5R6ML0805-6R8ML0805-8R2ML0805-100ML0805-120ML0805-150ML0805-180ML0805-220ML0805-270

Part No.Inductance


QMin.

TestFreq.L, Q

(MHz)



RatedCurrent

(mA)Max.

0.0470.0680.0820.100.120.150.180.220.270.330.390.470.560.680.821.01.21.51.82.22.73.33.94.75.66.88.2101215182227

±20%±20%±20%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%

151515202020202020202525252525454545454545454545505050505030303030

505050252525252525252525252525101010101010101010444221111

320280255235220200185170150145135125115105100756560555045413835322926242219181614

0.20.20.20.30.30.40.40.50.50.550.650.650.750.81.00.40.50.50.60.650.750.80.91.00.91.01.11.151.250.80.91.11.15

3003003003002502502502502502502502002001501501505050505030303030301515151515555



0.047 uH to 27 uH-40°C to + 85°C-20°C to + 85°C260°C, 10 SecondsPer MIL-STD-202F

ExternalElectrode

Ferrite

W

TL

E

Size Code

ML0805

L

.08"±.008

Dimensions

W

.05"±.008

T

.036"±.008

E

.024"±.008


R

ML0805 Series • Performance Curves

100

10

1

0.1

0.011 5 10 50 100 500

DC current (mA)

Indu

ctan

ce (

µH

)



22µH

1.0µH

10µH

0.1µH

100

10

1

0.1

0.011 5 10 50 100 500

DC current (mA)

Indu

ctan

ce (

µH

)



1000

1.0µH

22µH

10µH

0.1µH



8

4

0-5

-8

+25 +50+85

0-25

10µH0.1µH

22µH0.1µH

1.0µH

Temperature (°C)

∆L/L

(%)

12

-12

-16

10µH

1.0µH

22µH


80

60

40

20

00.1 0.5 1 5 10 50 100 500 1000

Frequency (MHz)


Q

1.0µH

22µH

10µH

0.1µH


Multilayer Chip Inductors

ML1206 Series


ML1206-47NML1206-68NML1206-R10ML1206-R12ML1206-R15ML1206-R18ML1206-R22ML1206-R27ML1206-R33ML1206-R39ML1206-R47ML1206-R56ML1206-R68ML1206-R82ML1206-1R0ML1206-1R2ML1206-1R5ML1206-1R8ML1206-2R2ML1206-2R7ML1206-3R3ML1206-3R9ML1206-4R7ML1206-5R6ML1206-6R8ML1206-8R2ML1206-100ML1206-120ML1206-150ML1026-180ML1206-220ML1206-270ML1206-330

0.0470.0680.100.120.150.180.220.270.330.390.470.560.680.821.01.21.51.82.22.73.33.94.75.66.88.210121518222733

±20%±20%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%±20%, ±10%

202020202020202020202020202045454545454545454550505050503535353535

50502525252525252525252525251010101010101010104442211110.4

32028023522020018517015014513512511510510075656055504541383532292624221918161413

0.150.250.250.30.30.40.40.50.60.50.60.70.80.90.40.50.50.50.60.60.60.60.60.60.60.60.60.60.60.60.60.91.05

30030025025025025025025025020020015015015010010050505050505050252525251555555

Part No.Inductance


QMin.

TestFreq.L, Q

(MHz)



RatedCurrent

(mA)Max.

ML1206 Series




0.047 uH to 33 uH-40°C to + 85°C-20°C to + 85°C260°C, 10 SecondsPer MIL-STD-202F

ExternalElectrode

Ferrite

W

TL

E

Size Code

ML1206

L

.126"±.008

Dimensions

W

.064"±.008

T

.043"±.008

E

.024"±.008


RMultilayer Chip InductorsML1206 Series • Performance Curves



100

10

1

0.11 5 10 50 100 500

Frequency (MHz)

Indu

ctan

ce (

µH

)

10µH0.1µH

100µH

220µH

1.0µH



100

10

1

0.1

1 5 10 50 100 500DC current (mA)

Indu

ctan

ce (

µH

)

500

10µH

0.1µH

100µH

1µH

220µH



2

-2

-10

+25 +50 +85

0-25

1.0µH0.1µH

10µH

100µH

Temperature (°C)

∆L/L

(%)

-4

-6

-8

0

4

6

8 0.1µH100µH

8.2µH220µH1.0µH

220µH

100

80

60

40

20

0

Q

0.5 1 5 10 50 100

Frequency (MHz)



1.0µH10µH

0.1µH220µH

100µH



HL0603 Series

HL0603-FH1N2SHL0603-FH1N5SHL0603-FH1N8SHL0603-FH2N2SHL0603-FH2N7SHL0603-FH3N3*HL0603-FH3N9*HL0603-FH4N7*HL0603-FH5N6*HL0603-FH6N8*HL0603-FH8N2*HL0603-FH10N*HL0603-FH12N*HL0603-FH15N*HL0603-FH18N*HL0603-FH22N*HL0603-FH27N*HL0603-FH33N*HL0603-FH39N*HL0603-FH47N*HL0603-FH56N*HL0603-FH68N*HL0603-FH82N*HL0603-FHR10*

Part No.Heights (T)

(mm)

Inductance(nH)

100MHz

S.R.F.(MHz)(Typ.)

0.80.80.80.80.80.80.80.80.80.80.80.80.80.80.80.80.80.80.80.80.80.80.80.8

1.21.51.82.22.73.33.94.75.66.88.2

10.012.015.018.022.027.033.039.047.056.068.082.0100

InductanceTolerance

±0.3 nH±0.3 nH±0.3 nH±0.3 nH±0.3 nH

±0.3 nH,10%±0.3 nH,10%±0.3 nH,10%±0.3 nH,10%

5%,10%5%,10%5%,10%5%,10%5%,10%5%,10%5%,10%5%,10%5%,10%5%,10%5%,10%5%,10%5%,10%5%,10%5%,10%

>6000>6000>6000>6000>6000

59005600480043503750330028502500215020501850175015001350120011001000

900830

0.100.100.120.160.200.220.250.280.290.300.330.350.400.450.500.550.600.650.700.901.001.502.002.50

10001000100010001000100010001000

600600600600600600600600600600500500500400400

30

Q (Typ.)(MHz)

100 800

131312121212131212121313151516171718171717181818

604751383841504142403445464848454339

(37)(35)(32)(34)(32)(27)

Rdc( )

(Max.)Ω

Idc(mA)

(Max.)

HL0603 Series




1.2 nH to 100 uH-40°C to + 85°C-40°C to + 100°C260°C, 10 SecondsPer MIL-STD-202F

ExternalElectrode

Ferrite

W

TL

E

Size Code

HL0603

L

1.6±0.15

Dimensions

W

0.8±0.15

T

0.8±0.15

E

0.3±0.2


RMultilayer Chip InductorsHL0603 Series • Performance Curves


FH82N

FH27N

FH10N

FH4N7

FH2N7

FH1N2

FHR10

1000

100

10

1

10 100 1000 10000

Indu

ctan

ce(n

H)

Frequency (MHz)



200

150

50

0

Q

10 100 1000 10000Frequency (MHz)

Q vs. FREQUENCY CHARACTERISTICSTest equipment: Impedance analyzer 4291A

100

FH39N

FH27N

FH10N

FH4N7

FH2N7

FH1N2

FHR10

FH68N


HL0805 Series

HL0805-F1N8HL0805-F2N2HL0805-F2N7HL0805-F3N3HL0805-F3N9HL0805-F4N7HL0805-F5N6HL0805-F6N8HL0805-F8N2HL0805-F10NHL0805-F12NHL0805-F15NHL0805-F18NHL0805-F22NHL0805-F27NHL0805-F33NHL0805-F39NHL0805-F47NHL0805-F56NHL0805-F68NHL0805-F82N

Part No.Heights (T)

(mm)

Inductance(nH)

100MHz

S.R.F.(MHz)(Typ.)

.024

.024

.024

.024

.024

.024

.024

.024

.024

.034

.034

.034

.034

.034

.034

.034

.034

.040

.040

.040

.040

1.82.22.73.33.94.75.66.88.2

10.012.015.018.022.027.033.039.047.056.068.082.0

InductanceTolerance

±0.3 nH±0.3 nH±0.3 nH

K, MK, MK, MK, MK, MK, MK, MK, MK, MK, MK, MK, MK, MK, MK, MK, MK, MK, M

60006000600060005400450040003650300025002450200017501700155013501300120011501000

850

0.100.100.100.130.150.200.230.250.280.300.350.400.450.500.550.600.650.700.750.800.90

300300300300300300300300300300300300300300300300300300300300300

Q (Typ.)(MHz)

100 600

131312131515151515161617171718181818191920

424432364645474446404342424238443936363525

Rdc( )

(Max.)Ω

Idc(mA)

(Max.)

HL0805 Series




1.8 nH to 82.0 uH-40°C to + 85°C-30°C to + 85°C260°C, 10 SecondsPer MIL-STD-202F

ExternalElectrode

Ferrite

W

TL

E

Size Code

HL0805

L

.08"±.008

Dimensions

W

.05"±.008

T

.024"±.008

.034"±.012

.04"±.012

E

.016"±.012


RMultilayer Chip InductorsHL0805 Series • Performance Curves


1000

100

10

1

10 100 1000 10000

Indu

ctan

ce(n

H)

Frequency (MHz)



33N

3N9

R10

70

10

0

Q

10 100 1000 5000Frequency (MHz)

Q vs. FREQUENCY CHARACTERISTICSTest equipment: Impedance analyzer 4291A

F39N

F56N

FR27F82N

FR12

FR18FR39

60

50

40

30

20

20 30 50 200 300 500 2000

221KGeneral Specifications

Temp Rise:Ambient Temp:Storage Temp:Operating Temp:Terminal Strenght:Current Rating:

Resistance to Solder Heat:Resistance to Solvent

20°C Max80°C Max-40°C to + 100°C-20°C to + 100°C0.5 KG MinBased on current flow and temperaturerise of 20°C maximum.260°C, 10 SecondsPer MIL-STD-202

221K.128"±.01

3.30mm±.3

Dimensions

.024"±.0080.6mm

.100"±.012.50mm±.2

0.088"±0.082.2mm±.2

0.32"±0.004.08mm

Parallel

3

3

0.5

21 1

Pc Board Pattern (in mm)

Series

3

1 2 3 2 1

CM322522 Series

Surface Mount Inductors Chip InductorsR

n


CM322522-R12MCM322522-R15MCM322522-R18MCM322522-R22MCM322522-R27MCM322522-R33MCM322522-R39MCM322522-R47MCM322522-R56MCM322522-R68MCM322522-R82MCM322522-1R0MCM322522-1R2MCM322522-1R5MCM322522-1R8MCM322522-2R2MCM322522-2R7MCM322522-3R3KCM322522-3R9KCM322522-4R7KCM322522-5R6KCM322522-6R8KCM322522-8R2KCM322522-100KCM322522-120KCM322522-150KCM322522-180KCM322522-220KCM322522-270KCM322522-330KCM322522-390KCM322522-470KCM322522-560KCM322522-680KCM322522-820KCM322522-101KCM322522-121KCM322522-151KCM322522-181KCM322522-221K

0.12 ± 20%0.15 ± 20%0.18 ± 20%0.22 ± 20%0.27 ± 20%0.33 ± 20%0.39 ± 20%0.47 ± 20%0.56 ± 20%0.68 ± 20%0.82 ± 20%

1.0 ± 20%1.2 ± 20%1.5 ± 20%1.8 ± 20%2.2 ± 20%2.7 ± 20%3.3 ± 10%3.9 ± 10%4.7 ± 10%5.6 ± 10%6.8 ± 10%8.2 ± 10%

10.0 ± 10%12.0 ± 10%15.0 ± 10%18.0 ± 10%22.0 ± 10%27.0 ± 10%33.0 ± 10%39.0 ± 10%47.0 ± 10%56.0 ± 10%68.0 ± 10%82.0 ± 10%100 ± 10%120 ± 10%150 ± 10%180 ± 10%220 ± 10%

25.225.225.225.225.225.225.225.225.225.225.27.967.967.967.967.967.967.967.967.967.967.967.962.522.522.522.522.522.522.522.522.522.522.522.520.7960.7960.7960.7960.796

500450400350320300250220180160140120100

858075706055504743403633302725201716151312111010

877

450450450450450450450450450450450400390370350320290260250220200180170150140130120110

807065605550454070656050

PART NUMBER INDUCTANCE(uH)

QMIN

TEST FREQ.(MHZ)

SRFMIN (MHZ)

DCRMAX (OHM)

IDC(mA)

CM322522 Series

30303030303030303030303030303030303030303030303030303030303030303030302020202020

0.220.250.280.320.360.400.450.500.550.600.650.700.750.850.901.001.101.201.301.501.601.802.002.102.502.803.303.705.005.606.407.008.009.00

10.0010.0011.0015.0017.0021.00


CM453232 Series

Surface Mount Inductors Chip InductorsR

n

102KGeneral Specifications

Temp Rise:Ambient Temp:Storage Temp:Operating Temp:Terminal Strenght:Current Rating:

Resistance to Solder Heat:Resistance to Solvent

20°C Max80°C Max-40°C to + 100°C-20°C to + 100°C0.5 KG MinBased on current flow and temperaturerise of 20°C maximum.260°C, 10 SecondsPer MIL-STD-202

102K.177"±.01

4.50mm±.3

Dimensions

.040"±.0081mm

.126"±.013.20mm±.3

0.128"±0.083.2mm±0.2

.047"±0.0041.20mm

Parallel

4

4

0.6

31.5 1.5

Pc Board Pattern (in mm)

Series

4

1.5 3 3 3 1.5

PART NUMBER INDUCTANCE(uH)

QMIN

TOLERANCE±%

TESTFREQ.(MHz)

SRF(MHZ)MIN.

DCROhmsMAX.

IDC(mA)

CM453232-R10MCM453232-R12MCM453232-R15MCM453232-R18MCM453232-R22MCM453232-R27MCM453232-R33MCM453232-R39MCM453232-R47MCM453232-R56MCM453232-R68MCM453232-R82MCM453232-1R0KCM453232-1R2KCM453232-1R5KCM453232-1R8KCM453232-2R2KCM453232-2R7KCM453232-3R3KCN453232-3R9KCM453232-4R7KCM453232-5R6KCM453232-6R8KCM453232-8R2KCM453232-100KCM453232-120KCM453232-150KCM453232-180KCM453232-220KCM453232-270KCM453232-330KCM453232-390KCM453232-470KCM453232-560KCM453232-680KCM453232-820KCM453232-101KCM453232-121KCM453232-151KCM453232-181KCM453232-221KCM453232-271KCM453232-331KCM453232-391KCM453232-471KCM453232-561KCM453232-681KCM453232-821KCM453232-102K

0.100.120.150.180.220.270.330.390.470.560.680.821.01.21.51.82.22.73.33.94.75.66.88.2

10.012.015.018.022.027.033.039.047.056.068.082.0

100.0120.0150.0180.0220.0270.0330.0390.0470.0560.0680.0820.0

1000.0

35353535404040404040404050505050505050505050505050505050505050505050505040404040404040404030303020

20202020202020202020202010101010101010101010101010101010101010101010101010101010101010101010101010

25.225.225.225.225.225.225.225.225.225.225.225.27.967.967.967.967.967.967.967.967.967.967.967.962.522.522.522.522.522.522.522.522.522.522.522.520.7960.7960.7960.7960.7960.7960.7960.7960.7960.7960.7960.7960.252

30028025022020018016515014514013513010080706055504540353327252018171513121110109.09.08.08.06.05.05.04.04.03.53.03.03.03.02.52.5

0.180.200.220.240.250.260.280.300.320.360.400.450.500.550.600.650.700.750.800.901.001.101.201.401.602.002.502.803.203.604.004.505.005.506.007.008.008.009.009.5010.012.014.018.026.030.030.035.040.0

800770730700665635605575545520500475450430410390380370355330315300285270250225200190180170160150140135130120110110105102100

9285806250503030


CM453232 Series


D310 Series

SMT Power InductorsR

.370"

9.40 Max

.510"

12.95 Max 1stsignificant

digit

2ndsignificant

digit

Multiplier

.330"

8.38 Max

.250"

5.21 Max

.100"

2.54

.100"

2.54

.300"

7.62

.115"

2.92.290"

7.37

.110"

2.79

Mounting Pads

PARTNUMBER

D310-1R0D310-1R5D310-2R2D310-3R3D310-4R7D310-6R8D310-100D310-150D310-220D310-330D310-470D310-680D310-101D310-151D310-221D310-331D310-471D310-681D310-102


INDUCTANCE(µH±20%)

1.01.52.23.34.76.8101522334768

100150220330470680

1000

DCR max.( )Ω

.009

.010

.012

.015

.018

.022

.029

.046

.058.10.14.18.26.38.61.93

1.271.842.47

ISAT(A)

9.08.07.06.45.44.63.83.02.62.01.61.41.21.0

.8

.6

.5

.4

.3

IRMS(A rms)

6.86.46.15.44.84.43.93.12.72.11.81.51.31.0

.8

.6

.5

.4

.3

inchesmm( )


D315 Series


.330"

8.38 Dia.

.370"

9.40 Max

.510"


digit

2ndsignificant

digit

Multiplier

.100"

2.54

.100"

2.54

.300"

7.62

.115"

2.92.290"

7.37

.110"

2.79

.450"

11.43

Mounting Pads

PARTNUMBER

D315-100D315-150D315-220D315-330D315-470D315-680D315-101D315-151D315-221D315-331D315-471D315-681D315-102


INDUCTANCE(µH)

101522334768

100150220330470680

1000

DCR max.( )Ω

.033

.042

.054

.080.10.17.22.34.44.70.951.22.0

ISAT(A)

8.07.05.54.03.83.02.52.01.61.21.01.0

.8

IRMS(A rms)

3.53.02.52.01.61.21.2

.9

.7

.6

.3

.2

.1

inchesmm( )

TSC Electronics, Ltd. Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.com 1-27

D320 Series


.370"

9.40 Max

.510"


digit

2ndsignificant

digit

Multiplier

8.6 Max

3.0 Max

2.50

2.50

.300"

7.62

.115"

2.92.290"

7.37

.110"

2.79

Mounting Pads

PARTNUMBER

D320-100D320-150D320-220D320-330D320-470D320-680D320-101D320-151D320-221D320-331D320-471D320-681D320-102


INDUCTANCE(µH±20%)

101522334768

100150220330470680

1000

DCR max.( )Ω

.09.012.019.025.032.055.0701.001.602.203.304.407.00

ISAT(A)

2.42.01.61.41.00.90.70.60.50.40.30.20.1

IRMS(A rms)

2.01.51.31.10.80.70.60.50.40.30.20.10.05

inchesmm( )



D325 Series

R Surface Mount Inductors

Features

• Compact, low profile (3.3mm max height)• Suitable for reflow soldering.• Available on tape and reel for automatic insertion.• Ideal for a variety of DC-DC converter inductor applications.

PARTNUMBER

D325-471D325-561D325-681D325-821D325-102D325-122D325-152D325-182D325-222D325-272D325-332D325-392D325-472D325-562

Electrical Specifications

INDUCTANCEL (µH)±20%

LTEST

FREQUENCY(KHz)

DCRESISTANCE

( ) MAXΩ

RATEDDC CURRENT

(A) MAX

0.470.560.680.82

1.01.21.51.82.22.73.33.94.75.6

100100100100100100100100100100100100100100

5.76.47.61012161928303648546372

19018017014013011010080757065555048

*Maximum allowable current is DC current which causes 10% inductance reduction of the initial value,or coil temperature to rise by 40°C, whichever is smaller. (Reference ambient temperature 20°C)

3.3Max

UNIT: (m/m)

4.4 2.02.03.0

7.3Max

2.0

5.0

D330 Series



7.9±

0.1

12.0

±0.1

4.9±0.1

6Max

12.5

±0.1

512.5±0.15

GENERAL CHARACTERISTICS

• Ideal for a variety of DC-DC converter inductor applications.• Available on tape and reel for automatic insertion.• Low DC resistance and large permissable DC current.• This can be surface mount assembly and reflow soldering is also possible.

PARTNUMBER

D330-100MD330-120MD330-150MD330-180MD330-220MD330-270MD330-330MD330-390MD330-470MD330-560MD330-680MD330-820MD330-101MD330-121MD330-151MD330-181MD330-221MD330-271MD330-331MD330-391MD330-471MD330-561MD330-681MD330-821MD330-102M



LTEST

FREQUENCY(KHz)

DCRESISTANCE

( ) MAXΩ

RATEDDC CURRENT

(A) MAX

101215182227333947566882

100120150180220270330390470560680820

1000

1111111111111111111111111

0.0250.0270.0300.0340.0360.0510.0570.0680.0750.110.120.140.160.170.230.290.400.460.510.690.770.861.201.341.53

4.003.503.303.002.802.302.102.001.801.701.501.401.301.101.000.900.800.750.680.650.580.540.480.430.40


Electrode

UNIT (m/m)


D335 Series


7.9±

0.1

12.0

±0.1

4.9±0.1

6Max

12.5

±0.1

5

12.5±0.15

GENERAL CHARACTERISTICS

• Ideal for a variety of DC-DC converter inductor applications.• Available on tape and reel for automatic insertion.• Low DC resistance and large permissable DC current.• This can be surface mount assembly and reflow soldering is also possible.

PARTNUMBER

D335-1R2MD335-1R5MD335-2R2MD335-3R3MD335-4R7MD335-5R6MD335-6R8MD335-8R2MD335-100MD335-120MD335-150MD335-180MD335-220MD335-270MD335-330MD335-390MD335-470MD335-560MD335-680MD335-820MD335-101MD335-121MD335-151MD335-181MD335-221MD335-271MD335-331MD335-391MD335-471MD335-561MD335-681MD335-821MD335-102M



LTEST

FREQUENCY(KHz)

DCRESISTANCE

( ) MAXΩ

RATEDDC CURRENT

(A) MAX

1.21.52.23.34.75.66.88.2

10.012.015.018.022.027.033.039.047.056.068.082.0

100.0120.0150.0180.0220.0270.0330.0390.0470.0560.0680.0820.0

1000.0

111111111111111111111111111111111

19.50m21.76m22.58m23.69m25.82m26.69m28.06m29.58m32.62m36.05m39.12m43.03m46.82m55.40m61.22m65.65m77.60m97.06m

0.100.120.130.170.190.250.290.310.450.500.730.800.911.001.35

9.07.97.46.45.95.55.04.94.03.83.63.23.02.92.72.42.22.11.81.61.51.41.31.11.0

0.900.810.790.700.640.600.560.49


ElectrodeUNIT: (m/m)


2.0

6.98.5

4.4 2.02.0

3.2

7.3

7.3

1.6

1.1

D350 Series

R

Features

• Compact, low profile (7.3mm square, 3.9mm high)• Suitable for reflow soldering.• Available on tape and reel for auto insertion.• Ideal for a variety of DC-DC converter inductor applications.

PARTNUMBER

D350-3R3MD350-4R7MD350-6R8MD350-100MD350-150MD350-220MD350-330MD350-470MD350-680MD350-101MD350-151MD350-221MD350-331MD350-471M



LTEST

FREQUENCY(KHz)

DCRESISTANCE

( ) MAXΩ

RATEDDC CURRENT

(A) MAX

3.34.76.8

10.015.022.033.047.068.0

100.0150.0220.0330.0470.0

100100100100100100100100100100100100100100

0.0250.0330.0440.0550.0870.1140.1700.2130.3550.4470.6441.1201.4402.370

1.921.591.371.110.920.740.610.500.430.320.280.230.200.16


3.9 Max

Surface Mount Inductors

3.0

UNIT: (m/m)


2.0

6.98.5

4.4 2.02.0

3.2

7.3

7.3

1.6

1.1

D353 Series

R

Features

• Low profile (7.3mm square, 5.2mm high)• Suitable for large current.• Available in magnetically shielded or unshielded version.• Available on tape and reel for automatic insertion.• Ideal for a variety of DC-DC converter inductor applications.

PARTNUMBER

D353-1R0MD353-1R5MD353-2R2MD353-3R3MD353-4R7MD353-6R8MD353-100MD353-120MD353-150MD353-180MD353-220MD353-270MD353-330MD353-390MD353-470MD353-560MD353-680MD353-820MD353-101MD353-121MD353-151MD353-181MD353-221MD353-271MD353-331MD353-391MD353-471MD353-561M



LTEST

FREQUENCY(KHz)

DCRESISTANCE

( ) MAXΩ

RATEDDC CURRENT

(A) MAX

1.01.52.23.34.76.8

10.012.015.018.022.027.033.039.047.056.068.082.0

100.0120.0150.0180.0220.0270.0330.0390.0470.0560.0

100100100100100100100100100100100100100100100100100100100100100100100100100100100100

0.0200.0240.0280.0340.0390.0500.0550.0730.0810.1020.1150.1590.1820.1990.2210.3060.3450.3900.4320.4400.7300.7800.9401.2501.4001.5201.7002.390

2.802.592.382.141.961.791.631.421.331.151.090.910.840.800.750.640.600.570.500.470.400.390.330.310.270.270.250.22


5.2 Max

Surface Mount Inductors

3.0

UNIT: (m/m)


D355 Series

R Surface Mount Inductors

Features

• Compact, low profile (7.3mm square, 5mm high)• Suitable for reflow soldering.• Available on tape and reel for automatic insertion.• Ideal for a variety of DC-DC converter inductor applications.

PARTNUMBER

D355-100KD355-120KD355-150KD355-180KD355-220KD355-270KD355-330KD355-390KD355-470KD355-560KD355-680KD355-820KD355-101KD355-121KD355-151KD355-181KD355-221KD355-271KD355-331KD355-391KD355-471KD355-561KD355-681KD355-821KD355-102K



LTEST

FREQUENCY(KHz)

DCRESISTANCE

( ) MAXΩ

RATEDDC CURRENT

(A) MAX

101215182227333947566882

100120150180220270330390470560680820

1000

100100100100100100100100100100100100100100100100100100100100100100100100100

0.1040.1160.1330.1460.1670.1880.2180.2440.3840.4030.4520.5100.9040.9401.0801.2291.3831.5632.4382.6933.0563.4413.9384.7855.650

1.501.441.361.301.231.111.000.930.850.750.700.650.520.500.450.400.380.350.300.280.260.240.210.190.17


8.56.9

2.0

3.2

7.3

7.3

1.1

1.6

5Max

UNIT: (m/m)

T210 Series

Surface Mount ToroidsR

A Max.

B Max.

D+.015-

F+ .005-

E +- .005

2X.060

C Max.

.005 4 Surfaces

GENERAL CHARACTERISTICS•Suited for IR and vapor reflow solder process•Rated up to 130° Celsius•Standard packaging in tubes, optional packaging

in plastic trays or tape-and-reel•Custom designs available upon request

MECHANICAL DATA

12345

0.3400.4350.5600.5900.670

0.3400.4400.5650.6150.700

0.2700.3600.3600.3900.390

0.2600.3500.4500.5000.580

0.3000.4000.5200.5500.620

0.2700.3600.4600.5100.590

VERSIONA max

(INCHES)B max

(INCHES)C max

(INCHES)D

(INCHES)E

(INCHES)F

(INCHES)

T210-01T210-02T210-03T210-04T210-05T210-06T210-07T210-08T210-09T210-10T210-11T210-12T210-13T210-14T210-15T210-16T210-17T210-18T210-19T210-20T210-21

7.0022.7035.3073.00

167.00292.00672.00

1134.001950.00

1.1012.3021.9040.5072.905.207.50

14.0025.903.807.90

16.00

1.41.01.41.30.90.90.70.70.73.42.82.72.72.64.85.45.55.18.07.87.2

6.217.629.758.1

114.0192.0383.0645.0

1070.01.09.4

16.229.150.03.85.19.0

16.12.54.99.3

0.0700.1250.1660.2900.3800.5600.8621.2501.7000.0110.0430.0630.0850.1330.0170.0180.0220.0320.0080.0120.019

112323345123452345345

Part NumberL @ 0 Adc µH

(tolerance ±20%)

Idc AMPS(Estimated rise of 55°Cfor conditions shown)

LW/Idc uH(Estimated rise of 55°Cfor conditions shown)

DC ResistanceOhms

Maximum(Ω)Version

ELECTRICAL SPECIFICATIONS

1-35TSC Electronics, Ltd . Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.com

T220 Series

Surface Mount InductorsR

1-36 TSC Electronics, Ltd . Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.com

15.70±0.1

14.00±0.1

12.00±0.1

15.3

0±0.

1

10.8

0±0.

1

9.4 Max

Features

• Surface Mount• Low profile (9.4mm high).• High reliability.• Suitable for reflow soldering.• Available on tape and reel for automatic insertion.

PARTNUMBER

T220-1R0MT220-1R5MT220-2R2MT220-3R3MT220-4R7MT220-6R8MT220-8R2MT220-100MT220-150MT220-220MT220-330MT220-470MT220-680MT220-101M



DCRESISTANCE

( ) MAXΩ

1.001.502.203.304.706.808.20

10.0015.0022.0033.0047.0068.00

100.00

3.8914.4015.1519.3714.4015.6120.0030.0842.2652.9095.12

112.25180.00225.83

*Rated for an operating temperature range of -30°C to 130°C (ambient temperature plus the temperature rise of the inductor)with a linear inductance variation.

10%DROP DC

(AMPS)

4.804.503.502.902.301.901.901.701.401.201.000.800.600.50

20%DROP DC

(AMPS)

7.507.005.504.203.702.902.902.502.001.7013.01.100.950.75

30%DROP DC

(AMPS)

10.009.007.505.504.804.003.803.302.602.201.801.501.301.00

T410 Series

SMT Power Inductor/ TransformersR

0.16

5"

.005 IN. MIN.FOR CLEANING

CLEARANCE

0.350"

3

4

0.450"

0.45

0"

0.35

0"

1

2

BOTTOM VIEW

PARTNUMBER

OPENCIRCUIT

INDUCTANCEµH±20%

FULL LOADINDUCTANCE

µH MIN

FULLLOAD

CURRENTAdc

2.302.001.901.101.000.740.720.640.540.460.440.380.37

DCRESISTANCE

Ohms MAX

0.0310.0400.0440.0800.1460.1670.2930.3660.5170.6900.7850.9661.142

OPENCIRCUIT

INDUCTANCEµH±20%

FULL LOADINDUCTANCE

µH MIN

FULLLOAD

CURRENTAdc

1.151.000.950.550.500.370.360.320.270.230.220.190.19

DCRESISTANCE

Ohms MAX

0.1220.1580.1760.3190.5840.6671.1711.4622.0652.7623.1373.8624.567

4.817.869.85

14.3520.2824.2833.6949.7267.4082.40

100.26150.80202.40

2.664.084.858.74

11.5416.3519.8429.3439.7348.5258.7285.16

107.60

19.8332.0140.6057.6483.90

100.21131.90203.00276.50331.00406.20607.50817.15

10.6416.3419.4034.9646.1565.4279.37

117.38158.92196.42234.88340.64430.39

SIZE 1 PARALLEL SERIES


T4105-1T4108-1T41010-1T41015-1T41020-1T41025-1T41033-1T41050-1T41068-1T41082-1T410100-1T410150-1T410200-1

1

2

4

3

SERIES

1

2

4

3

TRANSFORMER

1

2

4

3

PARALLEL

1-37TSC Electronics, Ltd . Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.com

B110 Series

Balun TransformersR4.

4 M

ax

6.1 Max

2 M

ax2

Max

0.6±

0.1

6.4 Max

Surface Mount (Unit: inches/mm) Features

Applications

• Pair wire coil for high stability.• Base pin terminal treated, allowing

mounting 'as is' on a PCB.

• Double balance mixers, broad-bandtranformers, impedance transformers, etc.

Double Balanced MixerFig. 1

DistributorFig. 3

TransformerFig. 3

1

3

1

1

IN OUT1

OUT2

Directional CouplerFig. 4

1

1IN OUT 1

OUT 2

Pin Connection

WindingTurns

1

2

3

4

5

2

1x2 1

2x2 2

3x2 3

4x2 4

5x2 5

------

4

5

6

OperatingFrequency

Range

50MHz~400MHz

10MHz~1.0GHz

8MHz~800MHz

6MHz~600MHz

5MHz~500MHz

400MHz~1.3GHz

------

9MHz~350MHz

3.5MHz~470MHz

2.2MHz~400MHz

1.5MHz~300MHz

20MHz~600MHz

6MHz~600MHz

6MHz~600MHz

6MHz~600MHz

InsertionLoss

10dB max.

6dB max.

3.5dB max.

2.5dB max.

2dB max.

4dB max.

3dB max.

3dB max.

3dB max.

3dB max.

3dB max.

IN to OUT-1,2 4.5dBmax.

OUT-1 to OUT-2(ISOLATION)

10dB min.

IN to OUT-1 1.3dB max.IN to OUT-2 11dB~14dB

IN to OUT-1 0.9dB max.IN to OUT-2 13dB~16dB

IN to OUT-1 0.8db max.IN to OUT-2 15dB~17dB

PinConnection

Fig.

1

1

1

1

1

1

2

2

2

2

2

3

4

4

4

B110-1012

B110-1013

B110-1003

B110-1008

B110-1011

B110-1005

B110-1085

B110-1052

B110-1024

B110-1086

B110-1087

B110-1014

B110-1015

B110-1006

YB001-1007

DoubleBalanced

Mixer

FrequencyMixer

Distributor

DirectionalCoupler

PartNumber



Inductance Range:Operating Temperature Range:Current Rating:Ambient Temperature:Inductance Tolerance:Marking:

0.10 µH to 1,000 µH-55°C to +105°C.Based on temperature rise not to exceed 35°C.70°C.±10% over entire inductance range.5-band color code.

0.250"±0.010

0.095"±0.010

24 AWG/TCW

1.15"Nom.

MCM Series

Molded InductorsR

MCM-R10KMCM-R12KMCM-R15KMCM-R18KMCM-R22KMCM-R27KMCM-R33KMCM-R39KMCM-R47KMCM-R56KMCM-R68KMCM-R82KMCM-1R0KMCM-1R2KMCM-1R5KMCM-1R8KMCM-2R2KMCM-2R7KMCM-3R3KMCM-3R9KMCM-4R7KMCM-5R6KMCM-6R8KMCM-8R2KMCM-100KMCM-120KMCM-150KMCM-180KMCM-220KMCM-270KMCM-330KMCM-390KMCM-470KMCM-560KMCM-680KMCM-820KMCM-101KMCM-121KMCM-151KMCM-181KMCM-221KMCM-271KMCM-331KMCM-391KMCM-471KMCM-561KMCM-681KMCM-821KMCM-102K

.10

.12

.15

.18

.22

.27

.33

.39

.47

.56

.68

.821.01.21.51.82.22.73.33.94.75.66.88.2

101215182227333947566882

100120150180220270330390470560680820

1000

40403835333330303030282825252830303745454550505555454050505045454545505050303030303030303030303030

25252525252525252525252525

7.97.97.97.97.97.97.97.97.97.97.97.92.52.52.52.52.52.52.52.52.52.52.52.5

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

680640600550510430410365330300275250230150140125115100

90807565605550403530252024222018151413121110

987.06.56.05.04.03.83.4

.08

.09

.10

.12

.14

.16

.22

.30

.35

.50

.60

.851.00

.18

.22

.30

.40

.55

.851.01.21.82.02.73.72.72.83.13.33.53.43.64.55.76.77.38

131517212528354246606572

13501270120011051025

960815700650545495415385590535455395355270250230185175155130155150145140135130125110100

928884666157524745403635302928

PartNumber

Inductance(µH)

Self ResonantFreq. Min. (MHz)

DCResistance

Max ( )Ω

Rated DC CurrentMax (mA)

TestFreq.(MHz)

QMin


TSC Electronics, Ltd . Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.com 1-39

MCS Series

Molded InductorsR


Inductance Range:Operating Temperature Range:Ambient Temperature:Inductance Tolerance:

Marking:

0.15 µH to 1,000 µH-55°C to +105°C.+70°C±20% from 0.15 µH to 0.47 µH; ±10% from 0.56 µHto 33 µH; ±5% from 36 µH to 1,000 µH5-band color code.

50504545505050503333333333333333455050556565757560606565606060555555555555505050606565656565656565656565656565656565656565656565

MCS-R15MMCS-R22MMCS-R33MMCS-R47MMCS-R56KMCS-R68KMCS-R82KMCS-1R0KMCS-1R2KMCS-1R5KMCS-1R8KMCS-2R2KMCS-2R7KMCS-3R3KMCS-3R9KMCS-4R7KMCS-5R6KMCS-6R8KMCS-8R2KMCS-100KMCS-120KMCS-150KMCS-180KMCS-220KMCS-240KMCS-270KMCS-300KMCS-330KMCS-360JMCS-390JMCS-430JMCS-470JMCS-510JMCS-560JMCS-620JMCS-680JMCS-750JMCS-820JMCS-910JMCS-101JMCS-111JMCS-121JMCS-131JMCS-151JMCS-161JMCS-181JMCS-201JMCS-221JMCS-241JMCS-271JMCS-301JMCS-331JMCS-361JMCS-391JMCS-431JMCS-471JMCS-511JMCS-561JMCS-621JMCS-681JMCS-721JMCS-821JMCS-911JMCS-102J

DC Resistance Max ( )ΩSelf Resonant Freq. Min. (MHz)

2525252525252525

7.97.97.97.97.97.97.97.97.97.97.97.92.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.5

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.03

.055

.09

.12

.135

.15

.22

.29

.42

.23

.65

.951.202.002.302.60

.32

.50

.60

.901.101.402.252.52.502.602.803.002.502.602.702.752.853.003.153.303.703.904.305.504.905.205.456.056.406.057.107.457.80

11.012.012.012.516.317.117.918.819.625.927.228.630.031.533.0

525450360310280250250200180160150135120110100

9055555045424034302625211915.514.513.71312.712.011.511.010.510.310.0

9.58.98.78.58.07.58.06.56.25.95.75.15.14.84.54.23.93.73.83.33.12.92.72.52.3

2740208015801370129012201020

880730670590485430335310294565450410335305271213202202202191185202198194193189184180176166162154151144140137130126130123117115143136136134117115112109107

939188868482

.15

.22

.33

.47

.56

.68

.821.01.21.51.82.22.73.33.94.75.66.88.2

1012151822242730333639434751566268758291

100110120130150160180200220240270300330360390430470510560620680720820910

1000

Part Number Inductance (µH) Rated DC Current Max (mA)Test Freq. (MHz)Q Min

0.375"±0.010

0.156"±0.010

22 AWG/TCW

1.15"Nom.


TSC Electronics, Ltd . Tel: (310) 534-2738 • Fax: (310) 534-3216 • http://www.tscgroup.com1-40


Inductance Range:Operating Temp:Terminal Strength:Rated Current:

0.10 µH to 1000 µH-20°C to +105°C5 lbs pull testBased on coil temperature

Dimensions

1.20" Nom.

24 Awg 0.30" Max

0.12" Max

Marking

Color

BlackBrownRedOrangeYellowGreenBlueVioletGreyWhiteGold

1st & 2ndSig. Fig.

0123456789-

3rdMultiplier

110

1001000

------

0.1

4thTolerance

±3%

±5%

ECM Series

Conformal Coated ChokesR

±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%

Part No. Inductance

[µH] Tol.

Q(min)

Self-ResonanceFrequency[MHz] (min)

DCResistance

[Ohm] (max)

IDC

[mA]

TestFrequency

[MHz]

ECMR10KECMR12KECMR15KECMR18KECMR22KECMR27KECMR33KECMR39KECMR47KECMR56KECMR68KECMR82KECM1R0KECM1R2KECM1R5KECM1R8KECM2R2KECM2R7KECM3R3KECM3R9KECM4R7KECM5R6KECM6R8KECM8R2KECM100KECM120KECM150KECM180KECM220KECM270KECM330KECM390KECM470KECM560KECM680KECM820KECM101KECM121KECM151KECM181KECM221KECM271KECM331KECM391KECM471KECM561KECM681KECM821KECM102K

0.100.120.150.180.220.270.330.390.470.560.680.821.01.21.51.82.22.73.33.94.75.66.88.2

101215182227333947566882

100120150180220270330390470560680820

1000

480450420400380360320310300280240200180160140120110

8570655040302822201615131110

9.58.57.56.56.05.55.44.74.34.03.73.42.82.52.32.01.51.2

0.060.060.070.070.080.090.100.120.150.180.200.220.250.280.300.350.400.450.500.550.600.650.700.800.850.901.001.201.351.802.102.302.602.903.203.804.204.505.006.007.007.508.00

10.0013.0015.0016.0023.0026.00

140013501270120011501110111010001000

950900900815740700655630595575555530500470425370350335315285270255240205195185175165160150140130120100

959085756560


35353535353535354040404040505050505050505050505050505050505050505050505050505050505050505050505050

25.225.225.225.225.225.225.225.225.225.225.225.225.27.967.967.967.967.967.967.967.967.967.967.967.962.522.522.522.522.522.522.522.522.522.522.522.52

0.7960.7960.7960.7960.7960.7960.7960.7960.7960.7960.7960.796


ECS Series

Conformal Coated ChokesR


Inductance Range:Operating Temp:Terminal Strength:Rated Current:

0.10 µH to 2000 µH-20°C to +105°C5 lbs pull testBased on coil

Dimensions

1.20" Nom.

22 Awg 0.42" Max

0.16" Max

Marking

Color

BlackBrownRedOrangeYellowGreenBlueVioletGreyWhiteGold

1st & 2ndSig. Fig.

0123456789-

3rdMultiplier

110

1001000

------

0.1

4thTolerance

±3%

±5%

Part No.Inductance

[µH] Tol.

Q(min)

Self-ResonanceFrequency[MHz] (min)

DCResistance

[Ohm] (max)

IDC

[mA]

TestFrequency

[MHz]

ECSR10KECSR12KECSR15KECSR18KECSR22KECSR27KECSR33KECSR39KECSR47KECSR56KECSR68KECSR82KECS1R0KECS1R2KECS1R5KECS1R8KECS2R2KECS2R7KECS3R3KECS3R9KECS4R7KECS5R6KECS6R8KECS8R2KECS100KECS120KECS150KECS180KECS220KECS270KECS330KECS390KECS470KECS560KECS680KECS820KECS101KECS121KECS151KECS181KECS221KECS271KECS331KECS391KECS471KECS561KECS681KECS821KECS102KECS122KECS152KECS182KECS222K

0.100.120.150.180.220.270.330.390.470.560.680.821.01.21.51.82.22.73.33.94.75.66.88.2

101215182227333947566882

100120150180220270330390470560680820

10001200150018002200

480450420400380340300280250230210172157144131121110100

94868074685340342014

9.97.66.56.56.36.25.75.34.83.83.53.02.82.62.42.01.81.61.61.41.20.70.60.50.4

0.060.060.070.070.080.090.100.120.130.140.150.160.170.180.200.220.240.250.300.350.400.450.500.600.650.700.750.800.901.001.101.201.301.501.802.002.503.004.004.505.006.006.507.508.509.50

12.0014.0020.0032.5037.0041.0045.00

17001640156014801400132012801200115011001030

980920880830790750720670640620590550530500480460430410390370350340320305290275185175165155145137133126120113105100

90504030

5050505050505050505050505050505050606060707070808070706060505050454540353060606060606055505045454030303030


±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%

25.225.225.225.225.225.225.225.225.225.225.225.225.27.967.967.967.967.967.967.967.967.967.967.967.962.522.522.522.522.522.522.522.522.522.522.522.52

0.7960.7960.7960.7960.7960.7960.7960.7960.7960.7960.7960.7960.2520.2520.2520.252



Inductance Range:Inductance Tolerance:

Test Frequency:Saturation Current:Temperature Rating:Encapsulation:

3.9 µH to 100,000 µH±10%, Standard(±5% Optional)1 KHzLowers inductance by 10%-55°C to +100°CPVC Shrink Tubing(Polyolefin Tubing Optional)

L

D

20 Awg

Series

PCL

PCS

L

0.92" max

0.60" max

D

0.47" max

0.26" max

Lead Length

1.20" nom.

1.20" nom.

PCL and PCS Series

Power Line ChokesR

PCL-3R9KPCL-4R7KPCL-5R6KPCL-6R8KPCL-8R2KPCL-100KPCL-120KPCL-150KPCL-180KPCL-220KPCL-270KPCL-330KPCL-390KPCL-470KPCL-560KPCL-680KPCL-820KPCL-101KPCL-121KPCL-151KPCL-181KPCL-221KPCL-271KPCL-331KPCL-391KPCL-471KPCL-561KPCL-681KPCL-821KPCL-102KPCL-122KPCL-152KPCL-182KPCL-222KPCL-272KPCL-332KPCL-392KPCL-472KPCL-562KPCL-682KPCL-822KPCL-103KPCL-333KPCL-683KPCL-104K

PCS-3R9KPCS-4R7KPCS-5R6KPCS-6R8KPCS-8R2KPCS-100KPCS-120KPCS-150KPCS-180KPCS-220KPCS-270KPCS-330KPCS-390KPCS-470KPCS-560KPCS-680KPCS-820KPCS-101KPCS-121KPCS-151KPCS-181KPCS-221KPCS-271KPCS-331KPCS-391KPCS-471KPCS-561KPCS-681KPCS-821KPCS-102KPCS-122KPCS-152KPCS-182KPCS-222KPCS-272KPCS-332KPCS-392KPCS-472KPCS-562KPCS-682KPCS-822KPCS-103KPCS-123KPCS-153KPCS-183K

3.94.75.66.88.2101215182227333947566882

100120150180220270330390470560680820

100012001500180022002700330039004700560068008200

100003300068000

100000

3.94.75.66.88.2101215182227333947566882

100120150180220270330390470560680820

100012001500180022002700330039004700560068008200

10000120001500018000

.007

.008.011.011.013.017.019.022.023.026.027.032.033.035.037.047.060.090.113.129.150.162.208.212.281.380.420.548.655.8441.041.181.562.002.062.632.753.193.925.696.327.30

25.7057.3089.00

.019

.022

.024

.026

.028

.033

.037

.040

.044

.050

.056

.076

.094

.109

.140

.131

.152

.208

.283

.340

.362

.430

.557

.665

.7721.151.271.611.962.302.653.454.034.485.406.568.639.6613.916.320.826.429.942.548.3

15.513.912.611.69.898.708.217.346.646.075.364.824.363.983.663.313.102.792.542.221.981.891.631.511.391.241.171.05.97.87.79.70.64.58.53.47.43.39.359.322.293.266.146.101.081

7.36.35.65.34.54.13.63.33.02.72.52.22.01.81.71.51.41.21.11.0.95.86.77.70.64.59.54.49.44.40.35.33.29.27.24.22.20.18.166.151.136.125.114.098.091

444444444444443.22.52.01.61.61.61.61.61.61.61.61.21.01.0.8.8.6.6.6.5.4.4.4.4.315.250.250.250.125.082.065

1.281.281.281.281.281.281.281.281.281.281.281.00.804.804.804.804.804.632.508.508.508.508.400.400.400.315.315.250.200.200.200.158.158.158.125.125.100.100.082.082.065.050.050.039.039

Part Number Part NumberInd.[µH]

Ind.[µH]

DCR[Max]

[Ohms]

DCR[Max]

[Ohms]INCR,I[DC,A]

INCR,I[DC,A]

RatedI, AC[Max]

RatedI, AC[Max]


PCL Series PCS Series



Inductance Range:Current Rating:

Operating Temperature:Inductance Tolerance:Terminal Strength:

1.0 µH to 10,000 µHBased on current flow temperature rise of 20° maximum at 80°Cambient temperature.-20°C to +10°C.±10% over entire range.5 lb. minimum

24 AWG/TCW

.35"±.05

.40" max

1.00" min

.35"±.05

.15"±.03

Dimensions

FC Series

Flat CoilR

INDUCTANCE(uH)

QMIN.

TESTFREQ.(MHz)

DCRESISTANCE

(Ohms)

1.01.21.51.82.22.52.73.33.94.75.05.66.87.68.2

101215182225273339475056687582

100120150180220250270330390470500560680750820100012001500180022002500270033003900470060007500

10000

RATED DCCURRENTMAX (A)

FC-1R0KFC-1R2KFC-1R5KFC-1R8KFC-2R2KFC-2R5KFC-2R7KFC-3R3KFC-3R9KFC-4R7KFC-5R0KFC-5R6KFC-6R8KFC-7R6KFC-8R2KFC-100KFC-120KFC-150KFC-180KFC-220KFC-250KFC-270KFC-330KFC-390KFC-470KFC-500KFC-560KFC-680KFC-750KFC-820KFC-101KFC-121KFC-151KFC-181KFC-221KFC-251KFC-271KFC-331KFC-391KFC-471KFC-501KFC-561KFC-681KFC-751KFC-821KFC-102KFC-122KFC-152KFC-182KFC-222KFC-252KFC-272KFC-332KFC-392KFC-472KFC-602KFC-752KFC-103K

37393537384043353737403829303280404040405050454545404040405080707070504050504540354045304070706262606060505050352525

.015

.012

.014

.020

.025

.030

.028

.036

.050

.053

.080

.092

.113

.110

.116

.190

.140

.158

.180

.230

.500

.285

.346

.371

.502

.600

.687

.8081.2001.2001.6001.7251.8552.0702.1052.7002.5303.3353.4505.2905.3005.4055.9305.9506.3258.600

10.0014.2615.7617.7018.0019.1021.7426.0028.0031.0050.0070.00

7.97.97.97.97.97.97.97.97.97.97.97.97.97.97.97.92.52.52.52.52.52.52.52.52.52.52.52.52.52.5

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.79

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

7.06.05.04.84.44.14.03.73.43.22.92.82.62.52.22.12.01.61.61.41.31.31.21.11.031.00

.95

.90

.86

.86

.70

.65

.60

.58

.49

.49

.45

.41

.39

.35

.34

.32

.29

.28

.27

.21

.21

.19

.17

.15

.14

.14

.13

.12

.11

.10

.08

.07

PARTNUMBER



.300" Max.

.300"Max.

S

F

.177"±.005

.177"±.005

WindingDirection

.475"Max.

.138"±.04

.039"±.01

VL01 and VL02 Series

Variable Shielded InductorsR

Wire:Core:Testing:

1.

2.3.

AWG #24 TCW6-32 (.129 x 32 TPI) Captive Slot

Inductance and Q measured on Q meter HP4342A. Attach 1/2" AWG #16 TCW soldered alongfull length of the coil leads. Then bend 1/4" down from bottom of stand of f at an angle of 90°.Inductance min. is measured with core flush to top of form.All inductance values greater than 0.1µH read at recommended Q meter frequency .

.038

.051

.071

.086

.107

.125

.150

.039

.054

.076

.095

.115

.134

.156

.0395

.056

.081

.104

.123

.143

.162

BrownRed

OrangeYellowGreenBlueViolet

Part NumberInd.[Min][µH]

Ind.[Nom][µH]

Ind.[Max][µH]

Color

VL01 SeriesMin. Q@ Ind.[Nom]

65 @ 50 MHz70 @ 50 MHz77 @ 50 MHz80 @ 50 MHz78 @ 50 MHz80 @ 50 MHz80 @ 50 MHz

VL01-02VL01-04VL01-06VL01-08VL01-10VL01-12VL01-14

.037

.054

.080

.100

.120

.142

.172

.200

.234

.260

.038

.058

.085

.110

.135

.163

.194

.224

.260

.288

.039

.063

.090

.120

.150

.184

.216

.248

.284

.315

BrownRed

OrangeYellowGreenBlueVioletGrayWhiteBlack


Ind.[Nom][µH]

Ind.[Max][µH]

Color

VL02 SeriesMin. Q@ Ind.[Nom]

76 @ 50 MHz78 @ 50 MHz78 @ 50 MHz78 @ 50 MHz76 @ 50 MHz72 @ 50 MHz68 @ 50 MHz66 @ 50 MHz60 @ 50 MHz56 @ 50 MHz

VL02-02VL02-04VL02-06VL02-08VL02-10VL02-12VL02-14VL02-16VL02-18VL02-20


Wire:Core:Testing:

1.

2.3.4.

AWG #22 Single Polyurethane10-32 (180 x 32 TPI) Hex Hole

Q & L readings taken on HP 4342A Q meter with 1/2" long of AWG #16 TCW soldered alongthe coil leads and with one end flush with the bottom of the coil. Then bent 1/4" down fromstand off at an angle of 90°.L min measured with core halfway out top of form.All L values greater than 0.1µH read at recommended Q meter frequency.All L values below 0.1µH calculated from readings taken at 50 MHz.

.414" Max.

.414"Max.

S

F

.276"±.007

.276"±.007

WindingDirection

.515"±.01

.138"±.04

.06"±.01

.157"±.04

VL03, VL04, and VL05 Series

Variable Shielded InductorsR

---------------------------------------------

88 @ 40 MHz86 @ 40 MHz85 @ 40 MHz80 @ 40 MHz77 @ 40 MHz80 @ 40 MHz82 @ 40 MHz---------------------------------------------------------------------------

105 @ 40 MHz104 @ 40 MHz

97 @ 40 MHz104 @ 40 MHz

93 @ 40 MHz80 @ 40 MHz82 @ 40 MHz78 @ 40 MHz80 @ 40 MHz80 @ 40 MHz78 @ 40 MHz80 @ 40 MHz76 @ 40 MHz76 @ 40 MHz82 @ 40 MHz80 @ 40 MHz74 @ 40 MHz

.044

.070

.117

.156

.197

.240

.280

.322

.363

.410

.045

.074

.099

.122

.149

.175

.200

.226

.256

.282

.369

.416

.468

.509

.556

.604

.660

.720

.770

.814

.846

.896

VL03-02VL03-04VL03-06VL03-08VL03-10VL03-12VL03-14VL03-16VL03-18VL03-20VL04-02VL04-04VL04-06VL04-08VL04-10VL04-12VL04-14VL04-16VL04-18VL04-20VL05-02VL05-04VL05-06VL05-08VL05-10VL05-12VL05-14VL05-16VL05-18VL05-20VL05-22VL05-24

.042

.064

.115

.147

.182

.220

.259

.299

.338

.382

.043

.070

.092.111.132.154.176.202.239.270.315.355.396.433.475.515.583.638.693.754.792.847

.045

.074

.120

.160

.205

.248

.290

.337

.377

.422

.047

.078

.106

.133

.165

.196

.223

.250

.274

.295

.423

.477

.540

.585

.637

.693

.738

.801

.846

.874

.900

.945

BrownRed

OrangeYellowGreenBlueVioletGrayWhiteBlackBrownRed

OrangeYellowGreenBlueVioletGrayWhiteBlackWhiteBlackBrownRed

OrangeYellowGreenBlueVioletGrayWhiteBlack


Ind.[Nom][µH]

Ind.[Max][µH]

Color

VL03, VL04, VL05 SeriesMin. Q@ Ind.[Nom]


Features

- Wide Band Chokes:Standard configurations available in 1½ turns, 2½ turns, 2 X 1½ turns and 3 turns.Custom winding configurations available upon request.Ideal for interference suppression.Initially resistive with flat impedance matching characteristics above 60 MHz.

WBC Series

Ferrite BeadsR

WBC0610-115-AWBC0610-115-BWBC0610-120-AWBC0610-120-BWBC0610-125-AWBC0610-125-BWBC0610-215-AWBC0610-215-BWBC0610-130-AWBC0610-130-B

Part Number Imp. ( )Ω Test Freq.Numberof turns

Dim. A(mm)

Dim. B(mm) Fig.#

425375600480675580425350625550

100100100100100100100100100100

1.51.52.02.02.52.5

2x1.52x1.5

3.03.0

6.0±0.36.0±0.36.0±0.36.0±0.36.0±0.36.0±0.36.0±0.36.0±0.36.0±0.36.0±0.3

10±0.510±0.510±0.510±0.510±0.510±0.510±0.510±0.510±0.510±0.5

1133224455


24AWG

A

40 mm Nom. B

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Turns

1.51.5222.52.52X1.52X1.533

Fair Rite

2943666661296166666129436666512961666651294366667129616666712943666681296166668129436666312961666631

Philips

VK20009-3BVK20019-4B

VK20010-3BVK20020-4BVK20011-3BVK20021-4B

Steward

28C0236-OAW

28C0236-OCW

28C0236-OBW

28C0236-ODW

28C0236-OEW

TSC

WBC0610-115BWBC0610-115AWBC0610-120BWBC0610-120AWBC0610-125BWBC0610-125AWBC0610-215BWBC0610-215AWBC0610-130BWBC0610-130A

Act

WB2-1.5TWB4-1.5TWB2-2.0TWB4-2.0TWB2-2.5TWB4-2.5TWB2-2X1.5TWB4-2X1.5TWB2-3.0TWB4-3.0T

Imp.

375425480600580675350425550625

Ω Freq. MHz

100100100100100100100100100100

Type

WBCWBCWBCWBCWBCWBCWBCWBCWBCWBC



NOTE: Cross reference information supplied as a guide. Use TSC Electronics, Ltd. sample for verification.

Features

-Leaded Bead Chokes:Higher current carrying capability than surface mount devices.Lowest cost component for signal filtering.

Applications include: High frequency filtering of clocks and video signals, prevents oscillations in highfrequency amplifiers, and filtering power input of oscillators or logic devices using high speed clocks.

LBC Series

Ferrite BeadsR

D C

B A

LBC035045-ALBC035045-BLBC035052-ALBC035052-BLBC035060-ALBC035060-BLBC035067-ALBC035067-BLBC035076-ALBC035076-BLBC035089-ALBC035089-BLBC035095-ALBC035095-BLBC035114-ALBC035114-BLBC035138-ALBC035138-B

Part Number Imp. ( )Ω Test Freq. Dim. A(mm)

Dim. B(mm)

Dim. C(mm)

Dim. D

50686182709178

10090110105133112150135180163220

100100100100100100100100100100100100100100100100100100

3.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.253.5±0.25

62.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.562.0±1.5

4.45±0.254.45±0.255.25±0.255.25±0.25

6.0±0.256.0±0.256.7±0.256.7±0.25

7.6±0.37.6±0.38.9±0.38.9±0.39.5±0.39.5±0.3

11.4±0.411.4±0.413.8±0.513.8±0.5

22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG22 AWG

LBC Series


Type

LBCLBCLBCLBCLBCLBCLBCLBCLBCLBCLBCLBCLBCLBCLBCLBCLBCLBC

Fair Rite

274300111227430151122743005112274300311227430041122743002112274300711227430081122743003112276100111227610151122761005112276100311227610041122761002112276100711227610081122761009112

Steward

08L0138-10028L0138-80028L0138-20028L0138-20028L0138-90028L0138-A0028L0138-40028L0138-50028L0138-60028L0138-700

TSC

LBC035045-BLBC035052-BLBC035060-BLBC035067-BLBC035076-BLBC035089-BLBC035095-BLBC035114-BLBC035138-BLBC035045-ALBC035052-ALBC035060-ALBC035067-ALBC035075-ALBC035089-ALBC035095-ALBC035114-ALBC035138-A

Act

K5A-035045K5A-035052K5A-035060K5A-035067K5A-035078K5A-035090K5A-035095K5A-035115

Imp. Ω Freq. MHz

100100100100100100100100100100100100100100100100100100


6882911001101331501802205061707890105112135163


NOTE: Cross reference information supplied as a guide. Use TSC Electronics, Ltd. sample for verification.

Part No. Inductance(µh ± 10%)

DC ResistanceOhms

Maximum

CurrentSaturatingAmps DC

Dimension (A)(inches)

D110 Series

Power Line ChokesR

A.660" max

.5"

.840" max




1.0 µH to 560 µHBased on current flow temperature rise of 20° maximum at 80°Cambient temperature.-20°C to +10°C.±10% over entire range.5 lb. minimum

87.068.056.056.047.047.040.036.032.029.026.024.521.219.017.516.515.814.413.211.811.010.0

8.98.27.55.85.65.14.34.13.83.33.22.9

D110-1R0KD110-1R2KD110-1R5KD110-1R8KD110-2R2KD110-2R7KD110-3R3KD110-3R9KD110-4R7KD110-5R6KD110-6R8KD110-8R2KD110-100KD110-120KD110-150KD110-180KD110-220KD110-270KD110-330KD110-390KD110-470KD110-560KD110-680KD110-820KD110-101KD110-121KD110-151KD110-181KD110-221KD110-271KD110-331KD110-391KD110-471KD110-561K

0.0030.0030.0040.0040.0040.0050.0050.0060.0070.0070.0070.0080.0090.0100.0110.0150.0200.0300.0400.0460.0620.0690.0770.0830.0950.1270.1810.2170.2400.3000.3360.4600.6360.696

.550

.550

.550

.550

.550

.550

.550

.550

.550

.550

.550

.550

.550

.550

.550

.550

.550

.550

.406

.469

.469

.485

.500

.500

.500

.480

.480

.480

.480

.480

.480

.480

.450

.450

1.01.21.51.82.22.73.33.94.75.66.88.2

10.012.015.018.022.027.033.039.047.056.068.082.0

100.0120.0150.0180.0220.0270.0330.0390.0470.0560.0


D120 Series

Power Line ChokesR

.825" max

.5"

.840" max





D120-1R0KD120-1R2KD120-1R5KD120-1R8KD120-2R2KD120-2R7KD120-3R3KD120-3R9KD120-4R7KD120-5R6KD120-6R8KD120-8R2KD120-100KD120-120KD120-150KD120-180KD120-220KD120-270KD120-330KD120-390KD120-470KD120-560KD120-680KD120-820KD120-101KD120-121KD120-151KD120-181KD120-221KD120-271KD120-331KD120-391KD120-471KD120-561KD120-681KD120-821KD120-102KD120-122KD120-152KD120-182KD120-222K

1.01.21.51.82.22.73.33.94.75.66.88.2

10.012.015.018.022.027.033.039.047.056.068.082.0

100.0120.0150.0180.0220.0270.0330.0390.0470.0560.0680.0820.0

1000.01200.01500.01800.02200.0

0.0030.0030.0030.0030.0040.0050.0050.0050.0050.0060.0070.0070.0090.0090.0130.0180.0190.0260.0290.0300.0350.0390.0530.0600.0800.0900.0980.1100.1500.2130.3050.3200.3550.3880.4300.5900.8181.4101.2601.3901.540

108.0108.0

83.068.068.058.058.050.050.044.039.036.030.027.025.022.021.020.518.617.015.113.612.711.310.4

9.48.67.87.06.35.24.94.54.13.73.43.12.72.42.22.0

0.6200.6200.6200.6200.6200.6200.6200.6200.6200.6200.6200.6200.6200.6200.6250.6300.6300.5460.5460.5940.6250.6250.6560.6560.5930.5930.5930.6710.5930.5620.5900.5900.5900.5900.5900.5900.5900.5900.5900.5900.590

Part No. Inductance(µh ± 10%)

DC ResistanceOhms

Maximum



A


D130 Series

Power Line ChokesR

1.10" max

.5"

.840" max





D130-1R0KD130-1R2KD130-1R5KD130-1R8KD130-2R2KD130-2R7KD130-3R3KD130-3R9KD130-4R7KD130-5R6KD130-6R8KD130-8R2KD130-100KD130-120KD130-150KD130-180KD130-220KD130-270KD130-330KD130-390KD130-470KD130-560KD130-680KD130-820KD130-101KD130-121KD130-151KD130-181KD130-221KD130-271KD130-331KD130-391KD130-471KD130-561KD130-681KD130-821KD130-102KD130-122KD130-152KD130-182KD130-222KD130-272K

1.01.21.51.82.22.73.33.94.75.66.88.2

10.012.015.018.022.027.033.039.047.056.068.082.0

100.0120.0150.0180.0220.0270.0330.0390.0470.0560.0680.0820.0

1000.01200.01500.01800.02200.02700.0

0.0030.0030.0030.0030.0030.0030.0030.0030.0030.0030.0040.0040.0060.0080.0090.0100.0110.0120.0170.0220.0240.0260.0290.0320.0340.0460.0640.0720.0800.1100.1220.1690.1870.2050.2560.2880.4260.4620.5180.7051.0201.140

116.0116.0116.090.090.074.074.062.054.054.047.042.038.035.032.029.025.023.020.019.019.117.515.614.013.212.110.8

9.78.77.97.16.76.05.55.04.54.13.73.42.82.52.3

0.8000.8000.8000.8000.8000.8000.8000.8000.8000.8000.8000.8000.7000.6900.6900.6900.7900.7900.7900.7900.7500.7500.7500.7500.7810.7500.7810.7810.7500.8120.7500.7500.7500.7500.7180.8430.7500.7500.7500.7700.7700.770

Part No.Inductance(µh ± 10%)

DC ResistanceOhms

Maximum



A


D210 Series

Fixed InductorsR

(Unit: mm)

8.5 Max. 11 Max. 5

5

0.62

Ideal as a choke coil for noise filtering and DC/DC Converterapplication.Tape and reel for automated Assembly.

Frequency Range:Inductance Range:Temperature Coefficient:

Features:

10-1200kHz1.0-1000µH400ppm/C, max.

D210-1R0M=RD210-1R5M=RD210-2R2M=RD210-3R3M=RD210-4R7M=RD210-6R8M=RD210-100K=RD210-120K=RD210-150K=RD210-180K=RD210-220K=RD210-270K=RD210-330K=RD210-390K=RD210-470K=RD210-560K=RD210-680K=RD210-820K=RD210-101K=RD210-121K=RD210-151K=RD210-181K=RD210-221K=RD210-271K=RD210-331K=RD210-391K=RD210-471K=RD210-561K=RD210-681K=RD210-821K=RD210-102K=R

1.0±20%1.5±20%2.2±20%3.3±20%4.7±20%6.8±20%10±10%12±10%15±10%18±10%22±10%27±10%33±10%39±10%47±10%56±10%68±10%82±10%

100±10%120±10%150±10%180±10%220±10%270±10%330±10%390±10%470±10%560±10%680±10%820±10%

1000±10%

20202020202050505040404030303030303020202020202020202020202050

7.967.967.967.967.967.962.522.522.522.522.522.522.522.522.522.522.522.520.7960.7960.7960.7960.7960.7960.7960.7960.7960.7960.7960.7960.252

0.0130.0160.0210.0250.0300.0350.0450.0500.0560.0610.0700.0800.0900.100.120.180.210.230.280.320.370.580.650.750.851.01.11.41.61.82.9

108.56.55.54.33.73.02.62.32.22.01.71.61.51.41.31.21.10.910.840.750.690.640.570.540.480.460.410.380.350.29

150130100

79512914131211

9.28.57.86.96.55.44.94.13.73.43.22.82.72.42.32.11.91.81.61.51.3

PartNumber

Inductance(1) Qu(1)(min.)

TestFrequency ofL, Qu (Mhz)

Rated DCCurrent(2)

DCResistance(4)

( max.Ω)

Selt ResonantFrequency(3)(5)

(MHz) min.

(1) Q and Inductance are measured by Q meterYHP-4343B equivalent.

(2) The rated DC current is that which the inductance valuedecreases 10% by the excitation DC current, measuredat 1kHz by Precision LCR meter 4284A(hp) or equivalent.

(3) SRF is measured by Network Analyzer 3577A(hp),MS560J(Anristu) or equivalent.

(4) DC Resistance is measured by Digital MultimeterTR6871(Advantest) or equivalent.

(5) SRF is for Reference Only.


D220 Series

Fixed InductorsR

Ideal as a choke coil or trap coil for low profile equipment.Entire winding core is encapsulated in heat-shrinked plastichousing to provide mechanical and environmental protection.

Frequency Range:Inductance Range:Temperature Coefficient:

Features:

10-1200kHz0.1-15mH400ppm/°C, max.

D220-101KD220-121KD220-151KD220-181KD220-221KD220-271KD220-331KD220-391KD220-471KD220-561KD220-681KD220-821KD220-102KD220-122KD220-152KD220-182KD220-222KD220-272KD220-332KD220-392KD220-472KD220-562KD220-682KD220-882KD220-103( )D220-123( )D220-153( )

0.100.120.150.180.220.270.330.390.470.560.680.821.001.201.501.802.202.703.303.904.705.606.808.20

10.0012.0015.00

606060606060606060606060808080808080808080808080606060

796796796796796796796796796796796796252252252252252252252252252252252252079.6079.6079.6

2.03.03.03.03.03.04.04.05.06.06.07.09.09.0

11.012.014.015.025.030.032.036.040.045.055.065.080.0

200200200200150150150100100100100

50505050505050404040303030202020

6.15.55.04.74.54.13.83.53.22.92.72.32.11.91.81.61.51.40.90.90.80.70.70.60.60.50.5

PartNumber

Inductance(2)(mH)

Q(2)(min.)

TestFrequency

(kHz)

Rated DCCurrent(3)(mA) max.

DCResistance

( max.Ω)

Selt ResonantFrequency(4)(MHz) min.

(1) Add the tolerance code of Inductance to within the ( )of the Part Number as follows: J=±5%, K=±10%.

(2) Q and Inductance are measured by Q meter YHP-4343Bor equivalent.

(3) The rated DC current is that which the inductancevalue decreases 10% by the excitation DC current,measured at 1kHz by universal bridge or equivalent.

(4) Self resonant frequency is for reference only.

ø8Max

6.2 Max2.3

ø0.7

5

(Unit: mm)


T110 Series

ToroidsR

GENERAL CHARACTERISTICS•Characterized for general purpose uses and Ripple Filters•Single layer designs•Can be used as Differential Mode Inductors in EMI Filters•Mounting package available upon request

M

NP

L

WITHOUT MOUNT

D

B

C

FE

2EA

WITH MOUNT

PartNumber

MountOption

L Typical(u Hy) (1)

Idc(Amps)

ETop(V-uSec)

L No D.C.±20%-12%

1000HzTest VoltsNo D.C.

DC ResistanceOhms

Maximum(Ω)

CoilSizeCode

MountPackage

Lead Dia.In. ±0.003

Min.Energy

Storage (uJ)

REFERENCE OPERATING VALUES DESIGN CONTROL VALUES

ELECTRICAL CHARACTERISTICS AT 25° Celsius

T110-01T110-02T110-03T110-04T110-05T110-06T110-07T110-08T110-09T110-10T110-11T110-12T110-13T110-14T110-15T110-16T110-17T110-18T110-19T110-20

202550

1003570

145285450100165270

4012

100170

55955555

2.02.52.52.52.53.03.03.03.03.54.04.04.05.05.05.05.07.07.0

10.0

HABCBCDEFDEFCGEFDFEF

.06

.04

.07

.10

.04

.05

.09

.14

.20

.04

.07

.10

.03

.03

.04

.05

.02

.03

.02

.02

1232345

45

3

5

4

5

0.0200.0200.0200.0200.0250.0250.0250.0250.0250.0320.0320.0320.0320.0320.0420.0420.0420.0510.0510.064

4075

150300110300650

12752000

60013002150

300150

12502100

650230013002750

523050905585

140300425130240350

7044

200300100225150175

32.820.745.794.128.461.0

141.8264.1436.3

90.7152.0263.9

37.920.390.7

159.754.996.049.155.9

0.00340.00230.00470.00940.00370.00760.0150.0350.0530.0120.0270.0410.0060.00380.0210.0320.0090.0250.0150.019

MMMMMMM

MM

M

M

M

M

12345

0.3400.4500.4500.6000.700

0.5780.6480.8280.9481.248

0.600.650.850.951.25

0.290.3250.4150.4750.625

0.1100.1500.1500.2250.250

0.1100.1100.1100.1100.110

A B C D E FSTANDARDPACKAGE NOMINAL ±0.005 NOMINAL TYPICAL

SIZE CODE

P MAX

N MAX

L=±.125-.025

A

.50

12, 70

.22

5, 58

0.375

9, 53

B

.64

16, 25

.32

8, 12

0.375

9, 53

C

.79

20, 06

.32

8, 12

0.375

9, 53

D

1.00

25, 40

.49

12, 44

0.375

9, 53

E

1.23

31, 24

.56

14, 22

.0875

22, 23

F

1.50

38, 10

.62

15, 74

.0875

22, 23

G

.78

19, 81

.29

7, 36

.075

19, 05

H

.61

15, 49

.26

6, 60

.075

19, 05

WITHOUT MOUNT DIMENSIONS (INCHES/MM)

WITH MOUNT DIMENSIONS (INCHES)


.70"17,8

Max

.80"20,3 Max

.20"5.08 Max

3 1

.50"±.01512,7±0,38

.375"9,53

Max.

I

A

.22"/.16"5,6/4,1

.036"/.030"0,91/0,76

3

B

T310 Series

Current SensorsR

PARTNUMBER TURNS

SENSEDCURRENT

T310-1050T310-1100T310-1200T310-1750

50100200750

10243530

INDUCTANCE(mH)

520

1001125

SENSITIVITYVOLTS AMPS

1111

1111

TERMINATINGRESISTOR ( )*Ω

50100200750

* Varying terminating resistance will increase or decrease output voltage/Ampere in conductor. Effect is essentially linearover a restricted operating range. Frequency response is also affected by varying terminating resistance.


inchesmm( )


RCustom Capabilities

CUSTOM MAGNETIC PRODUCTS

If you need something other than standard products, TSC has the capabilities todesign and build to your requirements:

Styles:

Types:

Packaging:

Please contact us and let us serve your Magnetic needs.

Toroidal, E Core, RM Core, Pot Core, Laminated, Air Core, Slug Core...

EMI Filter Beads, Power Inductors, Coupling Transformers, PulseTransformers, Hybrid Transformers, Switching Magnetics, High VoltageTransformers, Converter Transformers...

Surfacemount, Low Profile, PC Mount, Leadset, Flying Leads...

Tel: (310) 534-2738Fax: (310) 534-3216email: [email protected].


tsc electronics - unp · 2019. 8. 5. · z mb1206-190 1000 (Ω) 100 10 1 1 10 100 1000 frequency...

Documents