truxor 09 eng2.pdf

8/18/2019 truxor 09 ENG2.pdf

1/16

®


2/16

Truxor with their unique properties as multi-functional machines has ad-

vanced throughout the world on both land and water since the first ma-

chine was manufactured in 1996. The machine is the first of its kind on the

market. Its amphibian properties make it superior when it comes to work

in and around the borders between land and water. With the correct driv-

ing method, the minimal ground pressure of the machine makes it possi-

ble to advance without undue damage to the land. Truxor is therefore suit-

able for use on golf courses, private lots, nature preserves and sensitive

land sites where other machines have difficulty moving.

Truxor is easy to drive, rotates completely around its own axle in water and

has great precision when operating around e.g. docks. The broad

assortment of tools gives the machines great flexibility in different kinds of

work. The quick connection system allows for easy exchange of most toolsand the machines are changed from reed cutters to collectors in the wink

of an eye.

Our machines are delivered with standard hydraulic oil, ISO WG 46.

The machines can also be delivered with environment-friendly oil.

We are pleased to offer two models which are largely similar to each

other. There operating properties differ in the different engines, hydraulic

systems and the optional tools.

Truxor DM 4700 B is our predecessor which has been available on the

market since 1996 and has been continuously up-dated and improved to

become the machine it is today. We recommend this machine forprofessionals and entrepreneurs who want a dependable and flexible work-

ing machine; primarily for reed cutting and gathering of water plants.

Truxor DM 5000 is our latest model with a stronger engine and a new

hydraulic system allowing use of all tools with the machine as a power

source. In addition to the cutting tools and rakes, we can also offer a new

and broader assortment focusing on oil decontamination and dredging for

this machine.

Fast exchange of equipment using a

quick-connection attachment .

®


3/16

TRUXOR DM 5000 has been developed on anumber of points:

•Hydraulic operation of all equipment

•Improved ergonomics

•New improved instrument panel

•Hydraulic pressure gauge (an advantage when e.g. dredging)

•Load-sensitive hydraulic system allowing for control of the output of

power

•A 34 hp Daihatsu engine with improved placement for easy service

•A filter system for ventilation of the radiator

•New design

•More optional tools

•Standard equipped with work lighting

•Many hydraulic outlets for operation of tools. Electrically-heated

driver's seat.

•Adjustable flow for all functions of the hydraulic system

A new machine – new possibilities-a result of 15 years in the branch

Truxor DM 5 is the latest addition to our

product assortment. The new Truxor model has been

developed and adapted to offer our customers the

latest technology in easy-to-work with and well de-

signed machines. Great importance has been placed

on a very good, user-friendly hydraulic system. The

power is regulated where it is required and can be con-

trolled between the power outlets and operation of the

machine. The hydraulic system has a high output andsupports the operation of demanding pumps for dredg-

ing or oil decontamination.

The driver’s cab has ergonomically designed joysticks

for the control of operations and tools. Truxor DM

5000 is a professional's machine for those who want a

complete multi-machine for dredging, reed cutting,

excavating, oil decontamination, cultivating, etc.

®

Technical Data: Truxor DM 5000

Engine: Daihatsu 35 hp diesel, Environment ClassEuro 2

Electric system: 12 Volt, generator 40 Ah, battery 45

Ah

Cooling system: Combi-cooler for engines and

hydraulic systems.

Left joystick: For driving the machine.

Hydraulic outlet 1 – working pressure 140 bar,

adjustable flow 0 - 25 L/min. Hydraulic outlet 2 -

working pressure 130 bar, flow 16 L/min.

Right joystick: lifting, tilting, weight division. Hydrau-

lic outlet 3 – working pressure 150 bar. Adjustable

flow 0 – 50 L/min.

Driver’s cab: Folding cab, ergonomic, adjustable

driver’s seat with electrically heated seat, adjustable

control lever, instrument panel with engine speed,

engine temperature control lights, hydraulic oil

temperature, hydraulic pressure and fuel gauge.

Driving speed: 0 – 100 m/min.

Front lifts: Lifting power 250 kg, DM attachment for

fast exchange of tools.

Material: Pontoons made of salt water-durable

aluminium. Heat galvanized steel design.

Dimension: Length 4,7 m. Width: 2.06 m Height: 2.1

m.

Weight: 1,380 kg

Equipment: Work lighting, service tool

Truxor DM 5000 is delivered CE-marked.

Art no. 94-5000


4/16

Truxor DM 4700 B is a popular, well-knownface on the market. The first machines were

sold in 1996 and have been exported during the

years to customers all over the world.

When the machine was introduced it was unique

and a new technology within the branch. It was

big news that one and the same machine could

perform both reed cutting and gathering,

dredging and digging. Today, the concept is just

as up-to-date and the machine stands strong in

its class.

Truxor DM 4700 B is a flexible work machinefor professional use with two joysticks; the left

regulates operation of the machine and the

right steers the lifting arm and operation of the

tools. Its amphibian properties allow the

machine to move easily between water and

land. In the water, the paddle tracks give the

machine good precision when driving in narrow

areas; the machine turns on its own axle. A

Truxor brakes in distance of less than a half

metre from full speed.

A quick-connection in the lifting arm allows foreasier exchange between most tools; easily

managed by one person.

Truxor's flexible construction allows for easy

loading and unloading on the trailer which

means enormous moveability with low starting

costs when beginning the work.

Compared with Truxor DM 5000, this model

has a more simple hydraulic system making it

most suitable for reed cutting, gathering and

maintenance of marshlands.For larger power requirements, we recommend

Truxor DM 5000.

®

Motor: Lombardini Focs

1003 27 hp diesel

engine environment

class Euro 2.

Electric system:

Generator 45 ampere,

battery 45 ah. RRadiator system:

Water-cooled with dou-

ble-cooler for engine

and hydraulic system.

Left Joystick: For driving

the machine, the hy-

draulic outlet with vari-

able flow of 5-25L/min

hydrostatic operation.

Right Joystick: lifts, tilts,

weight distribution.

Driver s seat: Folding cab,ergonomic, electrically

heated driver's seat,

adjustable

steering-regulator with

temperature meter, con-

trol lights, hourcounter.

Driving speed:

0-80 m/min.

Front lift: Lifting power

250 kg, DM attachment

for fast exchange of tools.

Material: Pontoons made

of saltwater-durablealuminium.

The steel construction is

heat galvanized.

Dimension: Length 4.7 m

Width: 2.06 m.

Height: 2.1 m.

Weight: 1350 kg

Equipment: Work

lighting -, service tools

TruxorDM4700B is

delivered CE-marked.

Art no. 94-4700B2S

Technical Data:Truxor DM 4700 B


5/16


6/16

Doro Cutter 3090/3091The Doro Cutter 3090 is recommended for nor-

mal reed cutting and is usually the obvious

choice in most waters. The cutter is operated

hydraulically and is easily connected to Truxor’sequipment bracket. Cutting depth is 1 m. The

knives are exchangeable and the working breadth

may be varied from 2.2 to 4 m. The cutter

requires water for lubrication during work and is

therefore not suitable for use on land.

A stone-triggered system protects it from

breaking the knives against solid objects.The Doro Cutter 3091 is the same model of

cutter, but has an extended cutting depth of 1.4

Both models are delivered as standard with a

knife work width of 4 metres.

Doro Cutter ESM 2100

The Doro Cutter ESM 2100 is a front-attached

cutter with Busati model double-action knives

which means that the cutter does not need

water as a lubricant when working. The knives

do not require water for lubrication and are

suitable for use in shallow water and in

marshlands. The Doro Cutter ESM 2100 hasgood capacity and can also be used for thick

reeds. Work width 2.1 m and cutting depth

0.5m.

Technical Data:

Doro Cutter 3090/3091

Work width 4 m

Weight 61 kg

Cutting depth 1 m

Art no. 95-3090T

DORO CUTTER 3091Weight 67 kg

Work width 4 m

Cutting depth 1.4 m

Art no. 95-3091T

Technical Data: Doro Cutter ESM 2100

Work width 2.1m

Weight 68 kg

Cutting depth 0.5 mArt no. 90-ESM2100

Cutting unit

Accessories: Knife kits

2 (off) Work width 2.2 m

Art no. 95-70022

2 (off) Work width 3 m

Art no. 95-70030

2 (off) Work width 4 mArt no. 95-70040


7/16


This cutter is side-mounted on Truxor for

cutting along riversides and

channels so that the angle of the cutting unit

can be adjusted. The knives are a Busati

model which means that the cutter

does not need water for lubrication when

working. Doro Cutter ESM 1700 is equipped

with an automatic stone-triggered solution

which protects the cutter when motion is

stopped due to solid objects. The cutter has awork width of 1.7 m and a cutting depth of

0.5 m. It has good capacity and the Doro

Cutter ESM 1700 cuts thick reeds and plant

growth without problems.


Doro Cutter ESM 2200 cuts and gathers at

the same time which is a good property for

work in small boat harbours and small

streams where the water is constantly inmotion and the gathering work is

facilitates the work considerably. When

using the cutting function only, the

collection net for the cutting bucket can be

disassembled.

Doro Cutter ESM 2200 has a work width

of 2.1 m and a cutting depth of

approximately 0.8 m in water. The knives

are a Busati double-action model which

means that the cutter does not require

water for lubrication while working.


Work width approx. 2.1 m

Weight 109 kg

Width 2.25 m

Cutting depth 0.8 m

Art no. 90-ESM2200

Cutting unit


Work width 1.7 m

Weight 75 kg

Art no. 90-ESM1700


8/16

Reed rake, standardwith collapsible side sections; for gathering

and transporting plants after reed cutting.

The rake can be complemented with strainer

plates for gathering of refuse, algae andabsorbers (oil decontamination).

Rake, high tipThis rake has a high tipping height which

facilitates loading onto e.g. trailers or barges.

The rake is made of perforated steel plating

and can gather smaller particles such as

litter, algae and absorbers (oil

decontamination).

Work width 2.13 m

Weight 68 kgMax. lift height in water 1.3 m

Max. lift height on land 1.7 m

Art no. 94-47700

Collection - just as important as cutting

Cut water plants left in the water act as a

fertiliser. We therefore recommend thatcut plants always be collected and

removed. By gathering water plants and

picking them up, you also help to remove

part of the "over-fertilization" from the

lake. For those using their reed cutter in

different type of water, we usually

recommend cleaning the machine between

moves in order to prevent spreading

undesired water plants to new water

systems.

Strainer plates, accessory to standard rake.

Springing rakeWhen the waterside is uneven, the material

can be removed from the water using the

springing rake and then collected using the

standard rake.

Work width 2.5 m

Weight 30 kg

Art no. 94-47600

Rakes

Work width: 2 or 3.5 m.

Weight: 60 kg

Art no. 94-22500

Work width:

2 or 3.5 m.

Weight:

60 kg

Art no.

94-22500


9/16

Gripping bucket & Grip

Technical Data: Gripping bucket and Grip

Work depth of telescopic extension 1.7 m.Work depth of mechanical arm approx. 0.9 m.Weight of gripping bucket 76 kg

Weight of grip 40 kg

Weight of telescope 33 kg

Weight of mechanical bracket 9 kg

Art no. gripping bucket 94-58100

Art no. grip 94-59500

Art no. telescope 94-58400

Art no. mechanical bracket 94-60600

The gripping bucket and grip are used to lift plants and sediment from lake bottoms and beaches. The tool

can be combined with a telescopic arm or a mechanical bracket. With the tool attached, the telescope

has a working depth or 1.7 m.

If the work area is primarily beach edges and surface work, a mechanical bracket for the grip and grippingbucket should be chosen. The work depth will then be approx. 0.9 m. The mechanical bracket has a lowerweight which gives it greater lifting power compared with the telescopic arm.

Lifting rakeIts strong construction makes the rake an excellent

tool option for e.g. cleaning beaches and lifting of

somewhat heavier objects. The strong forks allow

for lifting e.g. stones, trees and plants with roots

which can lie along the beachside and on the bot-

tom of the lake.

Work width: 1.2 m

Weight: 36 kgArt no. 94-68000


10/16

The Doro Pump is the latest addition of dredging pumps to

our assortment and is combined with the Truxor DM 5000. The

pump is run by a hydraulic engine; it has a capacity of 10 - 40

m³ /h. The pump is mounted on a telescopic arm (sold

separately). A rotating wheel with horizontal cutters and vertical

teeth aerates the sediment and cuts off roots and soft materials

to facilitate feeding of material into the pump. The rotating wheel

makes the pump easier to maneuveur than its predecessor

which had a feeding screw at the pump inlet.The feeding is important to providing an even flow of sediment to

the pump; also facilitated by the knives positioned at the inlet of

the pump.

Technical data: The Doro Pump

Capacity 10-40 m³ /hour depending on material,

lifting height and the length of the tubing.

Weight: 87 kg.

Dredging depth: 1.7 m. With extension 2.4 m

Diameter drilling wheel: 0.8 meter

Equipment carrier: Only Truxor DM 5000

The Doro Pump is delivered with a standard kit.

Doro Pump Art no. 78-2501

Telescopic arm Art no. 94-58400

Accessories:

Flat tubing 100 mm

(Delivered in lengths

of 50 m) Art no. 78-102

Splice sleeve 100 mm Art no. 78-18800

Tube clips 100 mm Art no. 01-110D20

Standard kit for Doro Pump :

Hydraulic drill wheel, 3 m spiral tubing, 25 mflat tubing Ø 100 mm with bracket for transport

tubing, 5 floating tubes, 1 end piece, 1

quick-connection, 1 suction funnel, 1 joint

coupling with frame bracket, 1 splice coupling

Ø 100 mm,1 off 0.7 m telescope extension.

Dredge pumps


11/16

Engine: Briggs & Stratton 23 hp, electric start,

air-cooled. Centrifugal coupling which protects the

pump from overloading.

Capacity: 10-40 m³ /hour depending on material,

lifting height and the length of the tubing.

Dredging depth: 1600 mm

Length: 1950 mm Weight: 166 kg

Dredge pump 2500 is delivered CE-marked

Dredge pump 2500 is delivered with a standard kit

Art no. 78-2500

Accessories:

Flat tubing 100 mm

(Delivered lengths of 50 m) Art no. 78-102

Joint sleeve 100 mm Art no. 78-18800Tube clamps 110 mm Art no. 01-110D20

Dredge pump 2500For pumping sediment. The feed screw aerates

the bottom so that the pump receives an evenflow. The pump can also be equipped with a

suction funnel which is recommended when the

sediment it light and soft. A cutting device at the

opening of the suction pump cuts roots and

other soft objects. The pump is controlled from a

start panel mounted by the driver's seat.

Dredge pumps

Standard kit for Dredge Pump 25

Hydraulic feed screw, 3 m spiral tubing, 25 m flat

tubingØ 100 mm with attachment for float

tubes, 5 off float tubes, 1 off end piece, 1 quick-

connection, 1 suction funnel, 1 joint couplingØ

100 mm and 1 off 10 Litre petrol tank.

Technical data: Sala Roll Pump

Weight: 90 kg

Capacity: 12 m³ /h at 6 bar

Working pressure 6 bar

Max. pressure: 9 bar

Technical vacuum: -0.95 bar Equipment holder: Truxor DM 5000

Art no.: 79-3000

Accessories:

Kit for dredging Art no. 79-3001

Telescope Art no. 94-58400

Kit for dredging :

1 dredging pipe (mounted on the telescope), 3.3 m

suction tube Ø 65 mm, 2 quick connection Ø 65mm, 1 m pressure tube Ø 50 mm, 1 quick

connection Ø 50 mm, 1 connection for flat tubing Ø

50 mm with a frame bracket.

Art Nr. 79-3001

Sala Roll PumpCan pump light sediment with a reduced

amount of water. The pump works with a strong

vacuum and pressure. The high pressure

transports the sediment long stretches. The

dredging can be carried out without the water

becoming murky. The dredging pipe is mounted

on the telescope which is pressed down into

the sediment. Light and soft sediment is

sucked directly from the bottom.

Technical data: Dredge Pump 2500


12/16

The excavator

can

be mounted on both our Truxormodels. The combination becomes a floating excavator which

presents unique possibilities. The excavator is suitable for

clearing inlets and outlets of lakes, excavation of channels,

ditch digging, digging around docks, cable-laying, etc.

The excavator is controlled from the driver's seat with a

two-lever system placed on a central bracket which can easily

be adjusted according to the driver's wishes. Truxor with the

excavator allows for work to be performed in otherwise

inaccessible places.

Technical data:

Excavator

Digging radius 3.1 m

Digging depth 2.3 m

Supporting legs max. depth 1.9 m

Weight 330 kg

Valve package with a two-lever system for swings, lifts,

bucket and poles.

The excavator is delivered with a 23-litre bucket and

supporting legs (studs).

Complete for mounting on a Truxor.

Art no. 77-1800

Accessories:

49-litre bucket, work width 0.6 m Art no. 77-11900

Root knife: work depth 0.6 m Art no. 77-13400

Excavation rake: work width 0.9m Art no. 77-12000

Excavator


13/16

The Doro Miller The Doro Miller with rotary knife

The Doro Miller is used as a restoration miller for wetlands, beaches and lake bottoms.The miller is available in different work widths; they are exchangeable and can be dismounted

from the operating unit. The operating unit is mounted on the lifting arm.

When water lily roots and other roots are to be removed, a rotary knife is attached using an exten-

sion on the lifting arm which gives a work depth of 1.6 m.

Cultivator

Technical Data: Doro Miller Operating unit

Weight 36 kg, Revolutions 0 - 300 r/min

Torque, max 400 Nm

Length: 0.9 m

Equipment carrier: Only Truxor DM 5000

Operating unit Art no. 72-10000

Millers for the Doro Miller

Miller 0.9 m, Weight 33 kg.

Art no. 72-10200


Art no 72-10300


Art no. 72-10400

Rotary knife for the Doro Miller

Work width 0.8 m

Weight: 14 kg

Art no. 72-10500

Extension for the rotary knife, 0.5 m

Weight: 16 kg

Art no. 72-10100


14/16

For the Truxor DM 5000 we can offer a new product assortment for oil decontamination.

Doroskimmer 400 can be combined with two types of pumps which take care of both heavy and

thin oil.

Sala Roll Pump can suck heavy sediment and oil without using a large amount of water. It is a pump

that can also be used separately for dredging, or ”vacuuming” oil residues where the Skimmer cannot

reach.

Foilex is a high-capacity pump which gives it advantages when large spills must be decontaminated.

Oil decontamination

Sala Roll PumpThe Sala Pump is a suitable pump for

decontamination operations for thick-flowing or

polluted substances in hard-to-reach places. A very

strong vacuum gives a high suction capacity. Thehigh discharge pressure transports the substances

long stretches. The Sala Roll Pump is used sepa-

rately with a suction piece or in combination with

the Doroskimmer 400.

Capacity 12 m3/h at 6 bar

Weight 90 kg

Working pressure 6 bar

Max. pressure 9 bar

Technical vacuum -0.95 bar

Equipment carrier only Truxor DM 5000

Art no. 79-3000

Doroskimmer 400A combi-skimmer used for oil decontamination of

heavy or thin oils and algae. The Skimmer is

delivered with a brush roller of mixed brush

thicknesses which is suitable for decontamination of

most type of oils. Combine with Sala or Foilex

pumps.

Capacity 0.20 m3/h

Weight 48 kg

Equipment holder Only Truxor DM 5000

Kit for decontamination includes: Suction pipe 3.3 m, suction tube 65 mm, 4 quick

connections Ø 65 mm, 1 m pressure tubing 65

mm. 1 frame bracket. Art no. 79-3002


15/16

Trailer LMT 2500 is a specially adapted

trailer for transporting a Truxor. The trailer

has guide rails fixed to its bed and a tip

function which, together with ramps allow

for easy loading and unloading of the

machine. The trailer has a specially

designed chassis of highly durable steel.

The specially designed I-girders providestrength and low weight. Dirt is easily

removed and maintenance is minimal

thanks to a well-thought-out design.

Clamps and ramps are available as acces-

sories.

Technical Data: Trailer LMT 2500 Bed dimensions 500 x 220 cm

Total length 620 cm

Bed height 70 cm

Service weight 630 kg

Total weight 2500 kg

Max. load 1870 kg

Art no. 75-LMT2500

Accessories:

Kit with ramps and clamps

Art no. 75-17100

Oil decontamination

Trailer LMT 2500

Oil decontamination has different prerequisites for

dif-ferent environments. During the final phase of work,

there are usually smaller areas with pools of oil where

it can be more practical to use a mobile tank.

The Doro Tank is mounted between the pontoons and

has couplings for simple connection to pumps as well

as a connection for emptying the tank. The Doro Tank is

used in combination with a Doroskimmer 400.

Technical Data: Doro Tank Volume 200 L

Weight 14 kg

Equip. carrier Truxor DM 5000

Art no. 79-6000


16/16

MANUFACTURING/SALES:

Dorotea Mekaniska ABÖstra Polarvägen 10917 32 Dorotea0942-258 80

We are a company specialising in machines for lake cleaning, marsh-

land and water care. We have delivered and manufactured, developed

products and initiated innovated ideas for 16 years. Today, we have

Sweden's and perhaps even the world's widest assortment of machines

for caring for lakes. We supply everything from the small, simple reed

cutters to the professional machines such as dredgers, excavators, cut-

ters and collectors. Good quality and performance have always been our

motto and we have, through time, gathered experience and a know-

ledge base which we willingly share with our customers. The factory in

Dorotea has manufacturing, a spare part stock as well as sales. Wehave customers and retailers throughout the world. And when the world

is our market, Dorotea is just as central as any other place!

Spare parts for our products are available at Dorotea

Mekaniska AB and at our partner’s Rajo, in Belgium,

About reed cuttingOur lakes and waterways are overgrown due to overfertilization and much discussed climate

changes. The lakes are acidified preventing the flow of water. By cutting and clearing inlets

and outlets, the lakes can continue to prosper and in many places cutting is performed to im-

prove the flow of water and prevent flooding.

Regular reed cutting allows for increased use of lakes and waterways in the form of available,

navigable waterways, access to fishing, more beautiful views and well-kept bathing sites.

Dorotea Mekaniska AB

At our web site you will always find the latest news!

Image galleries, films, brochures, etc.

North/ South America Sales & Service:

562 Alpha Drive, Pittsburgh PA 15238Tel: 412 963-9200 / Fax: 412 963-9214Email: info@megator com

truxor 09 eng2.pdf

Documents