tritec 07.05.13 englisch - myob

TriTec® Steel Panel Formwork

Perfection

made in Germany

2

Conception and Properties

of the TriTec®

- System

8 7

2

� The formwork system with only one formwork clamp, GHI Formwork Clamp APC

� universally deployable and multi-functional panel formwork for concrete walls

� 3 system heights (1,20m, 2,70m und 3,30m) and 12 different element widths

� Clearly defined grid plan for any wall length

� extremely durable for full speed concreting

� vibration resistant and aligned at connection points with the APC Formwork Clamp

� Used with fewer spare parts for quick and easy working, with minimum storage needed

� developed, produced and tested according to Ger-man guidelines

1

9

10

3

5 6

3

4

Formwork Clamp APC long, Art.-No. 060041

Scaffold Bracket, available in 3 sizes

1 Formwork Clamp APC, Art.-No. 060040

Compensation Waler TTR 85, Art.-No. 060030

Push Pull Props, available in 3 sizes

2

3

Tie Rod (available in all lengths)

Base Plate PPS, painted Art. No. 060091

Brace Connector TT, Art.-No. 060060

Stop End Tie TTS, Art.-No. 060020

4

5

6

7

9

Wing Nut Plate DW 15, Art.-No. 060100

8

10

4

Showcase Presentation of

TriTec®- Element Combinations

� guaranteed the largest possible range of sizes with the least possible amount of panels

� reduced storage space on building sites

� increased amount of castings per element, held on the construction site

� reduced costs for through varied combinations for every ground plan

� stockpiling of horizontal lying panels viable

� stepped or slanted panels at different heights, offset walls, length adjustments and corner solutions are possible

5

TriTec®- Panels

ROBUST AND SOLID

� The Formwork element frame consist of a closed steel profile, hollow on the inside and an 18 mm layered sheet composed of Birch veneer

EASY AND HANDLE

� Due to the marginal amount of single components used, the search time has been reduced, interim storage simplified and the waiting time on the building site reduced to a minimum

MATERIAL SUITABLE FOR BUILDING SITES

� The steel panel frames have a profile height of 120 cm and a width of 60mm, standard and corner panels respectively with 20 mm. The form-work clamp APC is fitted onto the variable corrugation without any dis-turbances. The guard cover at panel top-ends, protect the plywood against damages.

� The 18mm film coated plywood consisting of Birch veneer is made to meet high demands. Bonded and glued crosswise according to BFU 100 with a Phenol resin 220g/m² coating

� Panel frames available in 3 heights and 12 widths.

� Associated systems parts such as the Push-Pull Props, Walers, Scaffold Brackets can be fastened to the integrated track. Corners are stiffened with steel plate

THE TRITEC® SYSTEM

� consist of 12 element widths

� Elements are galvanized for the best possible corrosion protection

� only one formwork clamp

� stability: up to 80 kN pressure absorption

� Plywood: resin coated Birch, 220 g

� quick assembly through a few single components

� longevity

SERVICES

� Buyback options

� financing

� application technique

� Logistics

6

TriTec

® - Panels 330 heights

330/20

330/55

PANEL 330 galvanized: Height Width Weight Article

TriTec-Panel 330 cm 240 cm 400,00 kg 020012













33

00

57

5

60

0

47

5

10

75

5

75

7

TriTec

® - Panels 270 heights

27

00

57

5

15

50

5

75

270/55

270/20









TriTec-Panel 270 cm 45cm 73,00 kg 030132






8















TriTec®

- Panels 120 heights

120/20

120/55

85

0

12

00

32

5

25

9

ARTICULATED CORNER

� for the use of variable walls angles

� side lengths respectively 30 cm

Height Width/Side Weight Article

TriTec-Shaft Corner 330 330 cm 30 cm 140,00 kg 020095



Corner Panels

INNER CORNER PANEL 90°

� for the shuttering of right-angled corners, from the inside

Height Width

/Side

Weight

galvanized

Article

galva-

nized

TriTec- Inner Corner 330 330 cm 30 cm 99,00 kg 020075

TriTec-Inner Corner 270 270 cm 30 cm 83,20 kg 030075

TriTec-Inner Corner 120 120 cm 30 cm 36,50 kg 040075

Article

powder

coated

020070

030070

040070

Weight

powder

coated

93,40 kg

78,50 kg

34,00 kg

SHAFT CORNER

� used for shaft shuttering

� 3 cm tolerance per side enables precise setting-up and easy solutions

powder coated Height Width

/Side

Weight Article

TriTec-Articulated Corner 330 330 cm 30 cm 124,00 kg 020090



10

TRITEC®- Universal

ECONOMIC DESIGN

� column shuttering

� outer corners

� stop end shuttering

� wall joinings

A Universal Panel with pre-drilled holes and a 3-hole grid at anchor level, can be delivered in

every height.

57

5

57

5

15

50

27

00

33

00

57

5

57

5

60

0

47

5

10

75

30

12

00

83

7

33

3

Universal Panel

galvanized

Height Width Weight

Article

TriTec-TTM-Universal Panel 330cm 72cm 138,00 kg 020082



11

WALL THICKNESS COMPENSATIOR

� is used to adjust the wall thickness in 5, 6 and 10 cm

Height Width Weight Article

Wall Thickness Compensator 330/5 steel 330 5 20,10 kg 020099


Wall Thickness Compensator 330/10 alu 330 10 15,70 kg 020097

FOUNDATION TIE CLAMP ART.NO: 060246

� is mounted at the profile, and secured with a bolt

� in connection with the perforated belt, the elements are firmly an-

chored, so that a shift is prevented

� the perforated band clamps holding the hole band voltage

TRITEC®

-Accessories

FOUNDATION STAP ART.NO: 060247

� foundation stap as connection for composed elements

with 6 cm edge profile

Alu




Wall Thickness Compensator 270/10 Alu 270 10 12,70 kg 030097




Wall Thickness Compensator 120/10 Alu 120 10 5,90 kg 040097

steel

12

TRITEC®

-Accessories

FORMWORK CLAMP APC LONG, ART.NO.: 011502

� straightens and draws all panels together

� secured and aligned

� galvanized

� only one formwork clamp for all panels compensating up

to 26 cm

COMPENSATION WALER TTR 90, ART.NO.: 060030

� universally operational waler made of high-quality steel

� bridges length adjustments

� increases rigidity in the inter-panel connection

� transfers anchor strength

� The walers are fastened onto the integrated track on the

panels. The necessary anchor holes for this, are integrated

in grid- like manner on the panels

FORMWORK CLAMP APC, ART.NO.: 060040

� straightens and draws all panels together

� secured and aligned

� galvanized

� only one formwork clamp for all panels compensating up to

12 cm

13

SCAFFOLDING BRACKET, TTW 80 ART.NO.: 060010

TTW 120 ART.NO.: 060011

� for the assembly of a secure 80 or 120 cm wide working plat-

form

� simply fasten to the vertical or horizontal panel

� high quality powder coating, on request

available in galvanized

TRITEC®

-Accessories

LIFTING HOOK 1,5 T, ART.NO. 060170

� to transport the vertically hanging panels

� certificated carrying load: 1,5 t

� top quality powder coating

LIFTING GEAR, ART.NO.: 060210

� for loading and unloading, as well as the movement of complete formwork packages

SCAFFOLDING BRACKET TTW 100 TWO PARTS ART.NO.: 060012

� for the assembly of a secure 100 cm wide working plat-

form

� simply fasten to the vertical or horizontal panel

� galvanized

14

PUSH-PULL PROPS

� erection aid

� allows for the simple adjustment of wall and column

formwork

� absorbs wind force

Typ extension range

PPS I 2,05 bis 2,95 m

PPS II 2,91 bis 3,80 m

PPS III 4,60 bis 6,00 m

Kicker PPS I 1,08 bis 1,40 m

Kicker PPS II 1,28 bis 1,90 m

Kicker PPS III 2,05 bis 2,94 m

Article

060140

060070

060150

060160

060080

060180

Weight

18,00 kg

22,10 kg

38,80 kg

5,20 kg

13,10 kg

17,00 kg

TRITEC®

-Accessories

� The Push-Pull Prop is attached to the panel

with the Brace Connector (Art. No. 060060)

spindle adjusting aid

15

TRITEC®

-Accessories

TIE RODS DW 15

� supplied in four standard lengths, additional lengths

are available upon request

� max. permissible load of the tie rod DW 15 and

DW 20 are according to DIN 18216

� WING NUT PLATE DW 15 (Art.No. 060100)

� fixed the tie rod

16

TRITEC®

- Column Formwork TTS

TRITEC ® AS COLUMN FORMWORK

� TriTec Column Panels are able to form and concrete columns, starting with a gird from 5 cm

reaching up to cross-sections of 75x75 cm. The panels are connected with the TriTec TTS

Column Tie Bolts and fastened with Wing Nuts. Unnecessary anchor holes are sealed off with

plugs.


TriTec-TTS Column Formwork 330 330 cm 90 cm 172,00 kg 090010




TriTec-TTS Brace Connector 0,65 kg 090040

Plug TTS 0,004 kg 099180

17

TRITEC®

-special panels and special colours

TRITEC® SPECIAL PANELS

� GHI is the contact person if you need special sizes. Some special sizes are already integrated in the

range. On request, we can of course make any other size.

� Prices on request.

TRITEC® SPECIAL COLOURS

� Give your items a personal touch. We offer a powder coating in all RAL colours.

� Price on request

120/20

120/40

120/45

120/50

120/55

18

TRITEC®

- galvanized

19

TRITEC®

- galvanized

20

TRITEC®

- production

21

TRITEC®

- production

22

TRITEC®

in use at a

23

construction site in Saudi Arabia

24

TRITEC®

in use construction site in Switzerland

25

TRITEC®

in use special elements 270 x 180; Belgium

26

PLANNING ▪ LOGISTICS ▪ SERVICE

Prompt quotations and comprehensive advice

CAD planning, production of formwork plans

Swift, on-time, reliable delivery– worldwide

We take complete charge of logistics and storage

Training and instructing your personnel on site

Cleaning, maintenance and repairs using new original

parts

Contact / Manufacturer

tritec 07.05.13 englisch - myob

Documents