TriAngle® UltraSpecPrecision Electronic Autocollimator

• adjustment and verification of the straight-ness of linear stages

• run out measurement of rotary tables• measurement of large-area surface

flatness• adjustment of optical components• alignment of machines and equipment• stability studies• and much more…

The electronic autocol l imators of the TriAngle® UltraSpec Series represent high-pre-cision angle measurement systems for ex-tremely high demands on angle resolutionand measuring accuracy. TriAngle® UltraSpecautocollimators are used for a wide variety ofmeasuring, testing and adjustment processeswhere highest precision and reliability in angledetermination are required, for example:

The light source consists of a stabilized highpower LED illuminating a newly developedreticle for enhanced angle resolution.

TRIOPTICS offers the TriAngle® UltraSpec auto-collimator as a complete measuring systemincluding a mobile touchscreen control unit.The user-friendly OptiAngle® software is in-stalled on the control unit and covers all com-mon measuring requirements with an ad-vanced, menu-guided graphical user inter-face. User-specific measuring functions cansimply be added.

Each autocollimator of the TriAngle® Ultra-Spec Series is calibrated with PTB angle stan-dards and supplied with test certificates andindividual calibration curves. Traceability of the measuring results to inter-national standards of the angle measuringvariable is consistently ensured.

The mechanically and thermally optimizeddesign of the TriAngle® UltraSpec permits con-sistently precise measurements even underdifficult conditions outside the measuring lab.The optical system of the TriAngle® UltraSpecautocollimators consists of a superbly correct-ed objective lens with very small distortionand a high-resolution digital CCD camerawith extremely low sensor noise.

Specifications TriAngle® UltraSpec

TRIOPTICS GmbH . Optische Instrumente

Hafenstr. 35-39 . D-22880 Wedel / Germany

Phone: +49-4103 - 18006 - 0 . Fax: +49-4103 - 18006 - 20

E-mail: info@trioptics.com . http://www.trioptics.com

© 2010 TRIOPTICS GmbH . All rights reserved

Measuring range 3000" (horiz.) × 2200" (vert.)within approx. 2 m measuring distance,diminishing beyond this

Focal Length 300 mm

Clear aperture 45 mm

Resolution 0,01"

Measuring accuracy ±0.05" within 10" measuring range±0.10" within 20" measuring range±0.25" within the total measuring range

LED wavelength 530 nm

Measuring rate > 10 measurements / sec.

Scope of delivery • TriAngle® UltraSpec autocollimator• Mobile touchscreen control unit• PC interface• Interface cables• OptiAngle® software package on CD• Individual calibration certificate• Operating Instructions