DIAMETER

mm

0.81.01.21.6SP

ABCDE

a

JOB

MEASURING RESITANCEDISPLAY 1 (D1) DISPLAY 2 (D2)

KEY 1 (K1)

KEY 2 (K2)

KEY 3 (K3)

ACCESS MENU. Switch Machine on. Press K1, K2 & K3 Simultaneously. Displays will change

Press K3 until Display 1 reads

Clean tip of torch and touch only tip to Clean Earth on jobPull trigger on torch.Displays should read similar to this.

Repeat this process Several times. If vary by more than + or - 2 Check earth conections

Press K3 until the following is displayed

Disengage lock on wire rollers in box and torch.Pull trigger on torch.Display 1 will read

Pull tigger again. Displays will indicate...Rollers will run at various speeds until stopping

Display 1 will read

Re-engage all rollers.Pull trigger again.Displays will indicate....Rollers will again run at various speeds until stopping.