transformer neutral earthing
TRANSCRIPT
-
8/23/2019 Transformer Neutral Earthing
1/12
Presented
By
H.JAYAKUMAR
-
8/23/2019 Transformer Neutral Earthing
2/12
WHY GROUNDING IS REQUIRED?
GROUNDING PLAYS A VITAL ROLE INPOWER SYSTEM OPERATION. EFFECTIVE
GROUNDING IS NECESSARY FOR THEPROPER OPERATION AND CO-ORDINATION OF PROTECTION
SCHEMES IN THE POWER SYSTEM ASWELL AS FOR PERSONNEL SAFETY.
-
8/23/2019 Transformer Neutral Earthing
3/12
PURPOSE OF EARTHING
-
8/23/2019 Transformer Neutral Earthing
4/12
GENERAL REQUIREMENTS
LOW VALUE OF EARTH RESISTANCE.
ACCEPTABLE SURFACE POTENTIALGRADIENTS
-
8/23/2019 Transformer Neutral Earthing
5/12
INDIAN ELECTRICITY RULES 1956.
IS: 3043/1966, 1987 : CODE OF PRACTICE
FOR EARTHING.
BS : CP 1013:1965
CBI & P RECOMMENDATIONSIGRE APPLICATION GUIDE
ANSI / IEEE STD.80/ 1961,1967,1986.
-
8/23/2019 Transformer Neutral Earthing
6/12
TYPES OF EARTHING SYSTEM EARTHING.
PROTECTIVE EARTHIN
-
8/23/2019 Transformer Neutral Earthing
7/12
SYSTEM EARTHING
EFFECTIVELY EARTHED SYSTEM(Xo / X1) < 3
(Ro / X1) < 1
Xo= ZERO SEQUENCE REACTANCE.
X1= POSITIVE SEQUENCE REACTANCE.
Ro= ZERO SEQUENCE RESISTANCE.
UNDER THE FAULT CONDITIONS THE VOLTAGES
OF THE OTHER TWO HEALTHY PHASES WILLNEVER BE MORE THAN 80% OF THE LINE TO LINEVOLTAGE OF THE SYSTEM. THIS IS ALSO CALLEDCO-EFFICIENT OF EARTHING.
-
8/23/2019 Transformer Neutral Earthing
8/12
-
8/23/2019 Transformer Neutral Earthing
9/12
-
8/23/2019 Transformer Neutral Earthing
10/12
BENEFITS Improved reliability
Improved fault protection
Fewer Faults.
Simplification of locating faults.
Greater Safety
Limitation of transient over voltages.
Lower cost and less maintenance.
-
8/23/2019 Transformer Neutral Earthing
11/12
Function of Earthing
Transformers Holding the neutral shift within limits.
Permitting the circulation of unbalanced load current
in the neutral. To limit the current during ling to earth fault.
To earth the system.
To provide single phase line to neutral load.
Can be used with resistance / reactance / arc
suppression coil.
-
8/23/2019 Transformer Neutral Earthing
12/12
SPECIFICATION (IS:3151)Voltage : Line to Line voltage of the system.
Current: The maximum neutral current.
Time : 10 sec for protection 60sec for feeders.
Reactance: This quantity is a function of thepositive sequence short circuit reactance of the
power system or x1