training & certification services - lipro.ly · pdf filelibyan professionals for...
TRANSCRIPT
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
1 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
في مجال اإلختبارات غير الهدامة ومنح التراخيص الدوليةفي المجاالت الهندسية عرض فني ومالي للتدريب
Engineering Courses and ASNT (SNT-TC-1A) NDT Level I & II – NDT Training Courses Offer
:جدول الدورات
المدة المستوى رقم الدورة اسم الدورة ر.م
1 Ultrasonic Testing (UT Level I & II) اسبوعين الثاني االول و UT014/1 طريقة الموجات فوق الصوتية
2 Magnetic Testing (MT Level I & ll ) الممغنطة الجسيمات اسبوع االول والثاني MT014/2 طريقة
3 Pentrant Testing (PT Level I & ll ) النافدة طريقة الصبغيات PT014/3 اسبوع االول والثاني
4 Radiographic Testing (RT Level I & ll) اسبوعين االول والثاني RT014/4 طريقة التصوير االشعاعي
5 Visual Testing for weld (VT level I & II ) للحام طريقة الفحص البصري VT014/5 يناسبوع االول والثاني
6 Radiation Safety ( RT ) الوقاية من االشعة RS014/6 ------------- اسبوع
7 Corrosion Controle course اية من التاكل مدورة الح CO014/7 ------------- اسبوع
8 Cathodic Protection course دورة الحماية المهبطية CP014/8 ------------- اسبوع
9 Paint Inspection course دورة الكشف عن الطالء PI014/9 ------------- اسبوع
10 Liffting Gear Inspection دورة في الكشف عن الروافع LG014/10 ---------------- اسبوع
11 Welding Technology تقنيات اللحام WT014/11 --------------- اسبوع
اسبوع ------------- Production Chemistry PC014/12الكيميائية المعالجة مجال في عامة دورة 12
13 General course Project Management Engineer دارة المشاريع الهندسية الدورة عامة PM014/13 ------------- اسبوع
14 Quality Management دورة إدارة الجودة QM014/14 ------------- اسبوع
الرسوم تشمل االتي
النظري ولنوعي والعملي( االمتحانات النهائية المصاحبة(
وامتحانات االعادة المجانية . 5الى 1من طريقة اختبار لكل
.لمرة واحدة
ترخيص مزاولة معتمد دوليا بالمستوى االول او الثاني
من طرق االختبارات االمتحانات في كل طريقةلمجتازي
. غير الهدامة
الة /كراسات مالحظات/حقيبة تدريب تحوي قاموس
.قرطاسية كافية/حاسبة
التي خاصة باالختبارات غير الهدامةشهادة حظور معتمدة
يمكن بها اجراء امتحانات الطريقة داخل وخارج ليبيا خالل
وشهادات حضور الدورة بحضورسنوات دون االزم 3
لباقي الدورات الهندسية.
كتاب المواصفات والمعايير الدولية / الكتاب الفصلي المقرر
.كتاب االسئلة واالجابات المنشورة في كل طريقة/ المقرر
مطبوعات الملخصات والواجبات اليومية للمحاضرات .
وجبة افطار مع بوفية قهوة وشاي وبسكويت مفتوح طيلة
.ساعات التدريب
لكل وتقيم الحضور نسبة يتضمن الدورة نهاية تقرير
.مشارك
Training package fees includes
Theoretical (Genera + Specific) & Practical Exams from 1 to 5.
Beside the course approved attendance certificate. ASNT-SNT-TC-1A Level II/ I certificates will be issued if candidate passing the written and practical examinations for NDT course.
Training bag containing dictionary, notebook, calculator and stationary ... etc.
ASNT Classroom NDT Training Hand Book (general dynamics) for each method.
Standard & Codes level II book for each method. ASNT- Published Questions & Answers (Q & A)
books for each method. NDT course handouts. Coffee breaks & breakfast. Final training courses report including evaluation
for each participant
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
2 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
اهمية الدورات
اهمية للعاملين في مجاالت الجودة والتفتيش ومراقبة ذاتتعتبر
الملحومات )التأكل وانهيارات المعادن بمختلف تقنيات انتاجها
في االنشأت والمصانع اثناء و( المطروقات ,المسبوكات ,
تجميعها او تشغيلها او عند التفتيش على المورد
Suitable for
All quality, corrosion, NDT personnel, inspectors and technicians engaged in, or responsible for, inspection of welds, castings, forgings or fabricated items during manufacture or in-service.
تجديد تراخيص مزاولة االختبارات غير الهدامة منتهية الصالحية:
دل لكل 450انعقاد الدورات وبرسوم قدرها ءلدينا اثنامتوفر
ترخيص
NDT Certification Renewal
Renewal of expired NDT Level I & II certificates are available during courses by rate of 450 LD / Certificate.
الطرق مختلف في المتدربين عابيالستواالدنى االعلى الحد
متدربين في جميع طرق 1متدرب واالدنى 81الحد األعلى اإلختبارات .
The Max. & Min Number of Trainees/Course
Maximum number of trainees is 18 and the minimum is 8 trainees for all test methods.
وامتحانات الترخيص المؤهل االدنى لحضور هذة الدورات
:للمواصفات لدولية في هذا المجال يكون الحد االدنى للتقدم المتحاناتوفقا
دبلوم عالي في العلوم الهندسية او الصناعية -المستوى الثاني
.اويكون مرخص بالمستوى االول
دبلوم متوسط في العلوم الهندسية او الصناعية -المستوى االول
.وبمستوى متوسط في اللغة االنجليزية
Qualifications Entry Requirements
Candidate seeking any of above NDT method certificate for Level II shall have a min. of high/advanced
diploma or a Bachelor degree in engineering /industry or method Level I certificate
LeveI I shall have a min. of 3 years Associate diploma in engineering /industry
Daily Schedule 9:00 to 14:45 54:45 حتى 0:00 الساعة من: اليومي التدريب جدول
* Description الوقت Time الوصف *
General Lecture 10:20-09:00 في الجزء العام محاضرة
Coffee Break 10:20:10:30 القهوة إستراحة
General Lecture 11:30-10:30 العام الجزء في محاضرة
Breakfast 12:00-11:30 وجبة إفطار
Specific & Practical 13:00-12:00 عمليالجزء النوعي والمحاضرة
Coffee Break& Prayer Options 13:30-13:00 القهوة ووقت الصالة إستراحة
Specific & Practical 14:45-13:30 والعملي النوعي الجزء محاضرة
دورة، وتشمل عند نهاية كل * تكون اإلمتحانات
النوعي.اإلمتحان العام والعملي و
.
* Exams are at the end of the course, and those are Practical, General & Specific exams
Equipment & Facilities
LIPRO Will Practically Provide More Than 80 Exercises Using: Advanced recommended equipment & accessories
for each NDT method. Training Defective Samples. Recommended Samples for Practical Examination.
ASNT Vision Examination Requirement
Near-Vision Acuity The examination should assure natural or corrected near-distance acuity in at least one eye such that the applicant is capable of reading a min. of Jaeger No. 2 or equivalent type and size letter at distance of not less than 12 in (30.5 cm) on a standard Jaeger test chart.
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
3 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
Color Contrast Differentiation
The examination should demonstrate the capability of distinguishing and differentiating contrast among colors or shades of gray used in the method. Note that those vision examinations will be done by our specialist.
Location
Training courses will be held in our premises or in Libya Insurance Co.(Naam Center) All will be in Tripoli, Libya.
LiPr
O
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
4 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
محتويات المنهاج
Magnetic Particle Testing (MT) Course
Content
Principles of magnetism; magnetic fields; induction;
permeability and reluctance; magnetisation; lines of force,
methods of testing; interpretation of indications;
demagnetisation; practical exercises; methods of assessing
sensitivity; instruction writing. The course ends with a
written and practical exam.
Outline
1. Glossary of terms.
2. Physical principles.
Lines of force. Permanent magnet.
Theory of magnetism.
Magnetic flux.
Magnetic induction.
Field strength.
Permeability.
Hysteresis.
3. Use of electric current to produce magnetization –
circular magnetization (current through specimen):
Field produced by current flow in coil.
Use of prods.
Field produced by prods.
4. Longitudinal magnetization (specimen as core of
solenoid ):
Field produced by current flow in coil.
Field strength in solenoid.
5. Use of different current types:
Direct current.
Half wave rectified current.
Alternating current.
Comparison of results using standard.
6. Detecting media (visual and fluorescent):
Wet.
Dry.
Comparison of results using standard
7. Selection of magnetization technique:
Alloy shape and condition.
Type of magnetization.
Direction.
Sequence of operation.
Examples of magnetization on different
commonest.
8. Flaws to be detected
Castings.
Forging.
Welds.
9. Interpretation and standards
ASTM – ASME
10. Test equipment
Manual.
Heavy duty.
Flux meters.
Penetrameters.
Magnetic media.
Practical Training, 20 exercises in:
Magnetograph
Lifting power check
Magnitude and direction of field check
Approval of magnetic particle
Magnetic particle inspection using yoke, prod, and
coil for pipe and plate
Interpretation, evaluation and reporting for weld
Inspection code & standards
References
1- Level II & I Study Guide: Magnetic Particle Testing (Revised) -
ASNT Publication.
2- Principles of Magnetic Particle Testing- ASNT Publication.
3- NDT Handbook: Volume 6, Magnetic Particle Testing - ASNT
Publication.
4- Classroom MT Training Book (general Dynamics) - ASNT
Publication.
5- Recommended Practice No. SNT-TC-1A - ASNT Publication.
6- Question and Answer (Q&A) Book Magnetic Particle Method -
ASNT Publication.
7- Mathematic and Formulas for Nondestructive Testing- TWI
Publication.
8- NDT Applications & Limitations Book-ASNT Publication.
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
5 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
Ultrasonic Testing (UT) Course
Content
Thickness measurement and weld defects; basic principles of
ultrasonics; the flaw detector; practical exercises on test
specimens containing simulated flaws; examination of
parent plate, butt welds; instruction writing. The course
ends with a written and practical exam.
Outline
1. Fundamentals of Ultrasonic Testing.
Glossary of terms and propagation of sound waves
Frequency, velocity & wavelength relationship.
Longitudinal and shear waves.
Elastic properties of materials.
2. Snell’s Law application:
Transverse wave production.
Mode conversion at interfaces.
3. Acoustic impedance:
Air-steel interface.
Couplants.
4. Beam geometry:
Dead, near and far zones.
Beam spread. (6, 20) dB, maximum amplitude.
Reflections in near zone.
D.G.S. system.
5. Ultrasonic attenuation – testable components:
Absorption.
Scattering.
Wavelength grain size relationships.
Use of an attenuator – conversions.
6. Generation of ultrasonic waves:
Piezo-electric – natural – ceramics.
Probes. Normal, angle, twin.
7. Ultrasonic instruments:
Cathode ray tube.
Time base.
Pulse.
Resolution.
8. Techniques:
A-scan.
B-scan.
C-scan.
9. Basic metallurgy and formation of flaws:
Forging.
Casting.
Welding
10. Sizing of flaws- setting of sensitivity:
(6, 20) dB maximum amplitude.
Standards – ASME Boiler & Pressure Vessel Code.
11. Examination techniques for components:
Forging.
Casting.
Welding.
Practical Training, 30 exercises in:
Calibration for normal and angle-probe
Flaw detector calibration check
Probe check
Resolution check
Sensitivity check
Normal and angle probe usage
Application on different samples which have
different artificial defects
Interpretation, evaluation and reporting for weld
Inspection code & standards
References
1- Level II & I Study Guide: Ultrasonic Testing - ASNT Publication.
2- NDT Handbook: Volume 7, Ultrasonic Testing - ASNT
Publication.
3- Classroom UT Training Book (general Dynamics) - ASNT
Publication.
4- Recommended Practice No. SNT-TC-1A - ASNT Publication.
5- Question and Answer (Q&A) Book - Ultrasonic Testing
Method - ASNT Publication.
6- Ultrasonic: Fundamentals, Technology, and Applications-
ASNT Publication.
7- Mathematic and Formulas for Nondestructive Testing- TWI
Publication.
8- NDT Applications & Limitations Book-ASNT Publication.
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
6 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
Pentrant Testing (PT) Course
Content
Materials, methods, compatibility of materials, equipment
and safety aspects; practical exercises; methods of assessing
sensitivity. During the Level 2 instruction writing and
application, attendees requiring only Level 1 training will
carry out practical applications to written instructions. The
course ends with a written and practical exam.
Outline
1. Glossary of terms.
2. History of penetrants.
Oil and chalk.
Fluorescent.
Visible.
3. Physical properties of penetrants:
Viscosity.
Surface tension.
Contact angle.
Specific gravity.
Wettability.
Flash point.
4. Physical properties of developers (wet & dry).
Wettability.
Drying ability.
Grain size.
Coverage.
5. Examination materials:
Visible.
Fluorescent.
Water washable.
Solvent removable.
Post emulsifiable.
6. Techniques:
Pre-cleaning.
Application of penetrant.
Excess penetrant removal.
Developing.
Inspection.
Post cleaning.
7. Test equipment:
Manual.
Automatic.
Lighting.
Precautions.
8. Indications:
Relevant.
Non- relevant.
False.
9. Inspection procedures and standard:
ASTM, ASME.
10. Formation of flaws:
Welds.
Forging.
Castings
Practical Training, 20 exercises in:
Penetrant sensitivity
Application of different penetrant types
Interpretation, evaluation and reporting for weld
Inspection code & standards
References
1- Level II & I Study Guide: Liquid Penetrant Testing -ASNT
Publication.
2- NDT Handbook: Volume 2, Liquid Penetrant Tests -ASNT
Publication.
3- Classroom PT Training Book (general Dynamics) - ASNT
Publication.
4- Recommended Practice No. SNT-TC-1A -ASNT Publication.
5- Question and Answer (Q&A) Book- Liquid Penetrant Testing-
ASNT Publication.
6- Mathematic and Formulas for Nondestructive Testing- TWI
Publication.
7- NDT Applications & Limitations Book-ASNT Publication.
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
7 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
Radiographic Testing (RT) Course
Content
Welding processes and weld defects; properties of X- and
gamma-rays; sensitometry; film selection; film processing
and spurious indications; factors controlling contrast and
definition; X- and gamma-ray equipment; ionizing radiation
hazards; regulations; use of screens and filters; selection of
angle of aspect; image quality indicators; defect depth
location; castings; reporting. The course ends with a written
and practical exam.
Outline
1. Radiological protection: Ionizing radiation, (sealed sources) regulations.
2. Properties of X-rays: Electromagnetic spectrum. X-ray tubes. Quality of radiation. Quantity of radiation. High energy radiation machines.
3. Properties of gamma rays: Radioactive sources. Curie, Rad, Seifert. Decay constant, half-life. Natural isotopes, Ir. Co. Th. Principal radiation, thickness ranges (steel)
4. Photographic process: Film Density – densitometer. Characteristic curve relationships. Contrast latitude – subject contrast – film contrast. Film speed – grain size. Intensifying screens, fluorescent lead. Intensification factor.
5. Processing: Development, fixing, washing. Dark- room layout. Automatic processing technique. Faults in processing
6. Sensitivity of radiographic technique: Contrast. Subject. Thickness. Film. Density type. Quality of radiation.
7. Definition: Geometric unsharpness. Film screen contrast. Film type – grain size. Radiation quality.
Development. Exposure chart – production of chart. Scattered radiation – measurement of scatter Filtration to reduce scatter Blocking
8. Image quality indicators: Penetrameters. Step type – ASTM, ASME. Wire type – ASTM, ASME. Measurement of penetrametre sensitivity.
9. Radiographic techniques: Single wall – related to pipe diameter. Double wall – related to pipe diameter.
10. Formation and detection of defects: Welds (relationship to welding process) & castings Interpretation
11. Inspection procedures and standards: ASME & API
Practical Training, 30 exercises in:
Radiographic test principles Exposure parameters Exposure charts Determination of geometrical unsharpness &
source size Radiograph quality determination by means of
measuring the sensitivity and film processing faults Interpretation, evaluation and reporting for weld Inspection code & standards
References
1- Level II & I Study Guide: Radiographic Testing, ASNT Publication.
2- NDT Handbook: Vol. 4, Radiographic Testing, ASNT Publication.
3- Classroom RT Training Book (general Dynamics) - ASNT Publication.
4- Recommended Practice No. SNT-TC-1A 5- Question and Answer (Q&A) Book Radiographic Testing
Method - ASNT Publication. 6- Working Safety in Radiography – ASNT Publication 7- Mathematic and Formulas for Nondestructive Testing -TWI
Publication. 8- NDT Applications & Limitations Book-ASNT Publication.
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
8 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
Content
Visual inspection provides the basic element for evaluation of structures or components being fabricated/maintained. It constitutes an important aspect of practicable quality control for weldments with joints that may require testing. It has been proven in numerous situations that an effective program of visual inspection will result in the discovery of the vast majority of those defects which would be found later using some other more expensive non-destructive test methods.
Outline
Personnel Requirements Fundamentals of Visual Inspection Visuals Lighting Material Attributes Environmental and Physiological Factors Visual Perception Equipment Weld joint geometry and welding terminology Welding processes Welding discontinuities Non-destructive testing Hands-on practical session involving the use of
inspection equipment
Who should attend?
Welding inspectors, quality assurance /quality control inspectors, maintenance engineers, design engineers, supervisors, foreman, mechanical engineers, technical officers, technicians, welders and inspection personnel
References
1. Level II & I Study Guide: Visual Testing, ASNT Publication. 2. Nondestructive Testing Handbook, 1st Ed., Robert C. McMaster
3. Classroom VT Training Book (general Dynamics) - ASNT
Publication.ASM Handbook, 9th Ed., Vol. 17
4. Hobart Institute of Welding Technology Welding Guide
5. Question and Answer (Q&A) Book Visual Testing Method -
ASNT Publication.
6. Visual Examination Technology, 2nd Ed., Vol. 8Welding
7. Handbook: Welding Technology, Vol. 1, 8th Ed.
8. Mathematic and Formulas for Nondestructive Testing -TWI
Publication
Visual Testing (VT) for welds
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
9 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
Description
This course is designed for those with very little or no
knowledge of radiation safety. The course is suited to
those requiring a knowledge of radiation safety including
trainees, industrial radiographers, managers and
supervisors.
The course is structured to meet national requirements
and recommendations and is ideal for all radiography
examination routes which may contain a basic radiation
safety content such as ASNT(SNT-TC-1A), NAS410 and
BGAS-CSWIP.
The course is ideal for those personnel working in the
radiation field as radiographers / welding inspectors or
assistances’
Course content
Basic radiation physics Radiographic equipment Radiation units Biological effects Dose limits Radiation detection and measurement Protection against radiation Calculations for radiation protection Storage of radiation sources Transport of radioactive substances Appointments and responsibilities Local Rules and contingency plans Personal dosimetry Normative documents
References
1. Level II & I Study Guide: Radiographic Testing, ASNT Publication.
2. NDT Handbook: Vol. 4, Radiographic Testing, ASNT Publication.
3. Classroom RT Training Book (general Dynamics) - ASNT Publication.
4. Recommended Practice No. SNT-TC-1A 5. Question and Answer (Q&A) Book Radiographic Testing
Method - ASNT Publication. 6. Working Safety in Radiography – ASNT Publication 7. Mathematic and Formulas for Nondestructive Testing -TWI
Publication.
Radiation Safety (RS)
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
10 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
Corrosion Training Course Outlines
Content
Principles of Corrosion phenomena, introduction,
electrochemistry, Environments, Engineering materials, forms
of corrosion, The course ends with a written and practical
evaluation Exams.
Outline
11. Introduction:
Corrosion Definition.
Costs of corrosion.
12. Corrosion Electrochemistry:
Thermodynamics.
Kinetics.
13. Effect of Environments:
Soil.
Sea Water.
Atmospheric.
Temperature.
Moisture content
14. Protection Methods:
Internal Protection Methods.
External Protection Method.
15. Engineering Material:
Metallic.
Non-Metallic.
16. Corrosion Monitoring method:
Cathodic Protection survey.
Coating inspection.
Chemical treatment.
Material Selection.
References
NACE Standard.
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
11 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
lifting gear inspection course
Content
This course is aimed at supervisory personnel who are
involved in mechanical lifting operations at all levels including
a combination of rigging and lifting and banksman /slinger
techniques. Preparation of lifting plan complex level which
supported by any calculation required.
Also to teach delegates the technical aspects of proof load
testing and thorough examination of lifting accessories and
manual appliances according national standards.
Outline
1. Lifting regulation international standard : PUWER
1998, LOLER 1998 , API:2C & 2RD,SMR , MHSWR 1999
2. Integrated Safe Systems of Work.
3. Load weight Estimation.
4. Centre of Gravity.
5. Angles and Tensions.
6. Moment effect and calculation.
7. LOADS: Static Loads, Lifted Loads , Centrifugal Force,
Dead Loads, Load Distribution, Dynamic Loads, Wind
Loads & Mechanical Advantage.
8. Crane Operations Overview and selection.
9. Rejection Criteria.
10. Wire rope: types , inspection and handling
11. Safety Devices.
12. NDT requirements.
13. Slinging Applications and Guidelines.
14. Hand Signals and Radios Communications.
15. Environmental Hazards.
16. Planning Lifting Operations : lift data , site data ,
rigging arrangement , rigging drawing, handling load
and soil ,underground condition.
17. Critical lift handling
18. Completing Complicated Rigging and Lifting
Operations.
Risk Assessment associated to the lifting plan.
Structure Training:
The course should design between classroom and
practical demonstrations and exercises. On
completion of a written test paper, the successful
delegates are issued with a license certification.
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
12 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
Cathodic Protection Program
Content
This course is aimed at supervisory personnel who are involved in mechanical lifting operations at all levels including a combination of rigging and lifting and banksman /slinger techniques.
Outline
1. Basics of electricity, electrical laws, electrochemistry, corrosion and CP theory
2. Polarity related to current flow and metal corrosion activity
3. Conduct tests to identify shorts and continuity tests in CP systems
4. Use test instruments to perform a variety of field tests such as structure-to-soil potentials, voltage and current measurements, soil resistivity, pipe/cable locating and rectifier readings
5. CP components including impressed current systems, galvanic anodes and test stations
6. Read shunts and understand their use in rectifiers, bonds, and anodes
7. Perform periodic surveys to confirm the effectiveness of a CP system
8. Reference cells, their maintenance, use, and precautions
9. Basic location mapping, report preparation, and recordkeeping
10. Review safety issues specific to CP 11. Code requirements related to CP
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
13 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
Project Management Engineer
Outline
1. The Project Management Life Cycle
What is a Project?
The Project Management Life Cycle
The Role of the Project Manager
2. Setting Up for Success The Meaning of Success
What Happens in the Initiation Phase?
Project Definition and Scope
Putting Together a Statement of Work
The Project Charter
3. The Project Team The Teamwork Challenge
Selecting Team Members
The Team Charter
4. Risk Management
Project Risk
5. The Project Team
The Work Breakdown Structure
Work Package Sequencing
6. The Project Schedule
The Scheduling Process
Time Estimates
7. The Project Budget
What is a Budget?
Creating a Preliminary Budget
Budget and Schedule Balancing
8. Project Tracking and Control
Moving the Project Forward
Monitoring for Project Progress
Earned Value Analysis
Getting Back on Track
9. Project Reports
Communications Overview
Project Performance Reports
Project Change Requests
10. Project Close-out
Elements of Close-out
Evaluation of People and Projects
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشارات اــوا ليبيــمحترف
Training & Certification Services
Updated : 04.02.2014
14 www.lipro.ly
Libyan Professionals for Inspection & Consultancy
للتفتيش واالستشاراتمحترفـوا ليبيـا
Tele: +218 21 363 2385 Fax: +218 21 363 2385 Mobile: +218 91 989 0959 Email: [email protected] P.O. Box: 83098 Algomhoria St., Tripoli, Libya
Production chemistry
Outline
1. Corrosive agents
2. Corrosion inhibitor selection and application
3. Predicating and monitoring corrosion rates
4. Basics of oil field emulsions
5. Demulsifier selection and field application
6. Foams
7. Defoamers
8. Foam basics
9. Field application of foams
10. How defoamers work
11. Compounds that cause scaling
12. Predication of scaling tendency
13. Scale inhibitors
14. Solvents to dissolve scales
15. Requirements for gas hydrates to form
16. Types of compounds used to control hydrate
formation
17. Causes of paraffin (wax) problems
18. Paraffin treatment chemicals
19. Asphaltene stability tests
20. Asphaltene treatment chemicals
21. Chemicals used as H2S scavengers
22. Application of scavengers
23. Oil carryover in water
24. Removal of oil and oily solids
25. Tests required for chemicals used in deep water
26. Green chemicals (Environmentally friendly
chemicals)
27. International guidelines