train station-instruction
TRANSCRIPT
LITTLETOWNThe Train Station
Instructions Booklet
Assembly instructions
Cut lines
Mountain fold
Valley fold
glue spot
small hangar part 1
map of Littletown’s train stationtree tree
main building train station
benc
h
lampost
stairs
platform train station
grass
Note: Glue these two parts first to the roof edges before gluing the roof to the top of the house.
little edge
CAUTION• Use caution
when using scissors or a hobby knife.
• Glue, scissors, and other tools should be kept out of the reach of younger children.
LITTLETOWN1 - Small Hangar
Tip: Always try out the pieces before gluing to check where they fit or if they need some adjusment.
Cut lines
Mountain fold
Valley fold
glue spot
small hangar part 1
map of Littletown’s train stationtree tree
main building train stationpart 2be
nch
lampost
stairs
platform train station
grass
Note: First glue part 3 to part 1, then glue on part 2. (See photo.)
edge
This building has a few complex parts to assemble, so take your time and don’t worry if it doesn’t turn out perfectly. Your work will improve as you gain experience.Have fun and enjoy building your model.
Assembly instructions
LITTLETOWN2 - Train Station
Building
newspaper pages (See photo for a suggestion of where to glue.)
More Assembly Tips• Write the number of
each part on the back before cutting it out. This ensures keeping track of parts even after cutting them out. This is especially helpful in the case of small parts.
• Take your time to cut each piece out carefully.
• When gluing the 2 sides of a character or similar part, use glue stick instead of white glue to prevent the warping of the paper due to the large area to be glued.
• Always try out the parts to be glue before applying the glue. This helps in understanding how the parts fit together, and to notice if any adjustements are needed.
• And remember, there is no hurry, take your time, and don’t feel shy about asking another for help if a piece is difficult to assemble. Experience will come with practice and soon you will be capable of assembling complex models.
step 1
step 2
step 3
step 4
Hello!
3 - Train StationPlatform and AccessoiriesAssembly instructions
Cut lines
Mountain fold
Valley fold
glue spot
small hangar part 1
map of Littletown’s train station
main building train stationpart 2
benc
hlampost
stairs
platform train station part 3
grass
edge
This model has a few complex parts to assemble, so take your time and don’t worry if it doesn’t turn out perfectly. Your work will improve as you gain experience.Have fun and enjoy building your model.
grass
LITTLETOWN
Form three triangles and glue them under the platform to add extra strength to support the two buildings of the train station.
Glue the sign against the edge
Glue the lamposts on the floor of the platform and up against the edges to add extra strength.