traditional - narvi finnish sauna heaters. 2 kota heaters and cauldrons have, for almost half a...
TRANSCRIPT
KOTA SAUNA HEATERS & HEATING EQUIPMENT 2016
Made by NARVI Finland
TRADITIONAL
Traditional Finnish sauna heaters.
2
Kota heaters and cauldrons have, for almost half a century, offered quality
at a good price to enthusiastic sauna-goers. New Kota heaters continue
to respect Finnish sauna traditions while being superior quality and reliable
products. All Kota heaters and cauldrons have been designed and made in
Finland and bear the quality marking of a key flag.
Top-quality Kota fireplaces, wood stoves, and smokers are handy at home,
summer houses and other places for spending free time. Kota products are
the right choice when you are looking for good quality at an affordable price.
3
4
Kota LuostoKota base Kota Luosto VS (water tank)
SAUNA HEATERS AND CAULDRONS
Kota Inari
ONE BASE - THREE DIFFERENT HEATERS!!
5
KOTA LUOSTO & LUOSTO VS
THE EXCEPTIONAL SHAPE OF THE HEATER FACILITATES INSTALLATION IN NARROWER SPACES AS WELL.
THE KOTA L HEATER HAS BEEN UPDATED. THE HEATER IS NOW BETTER THAN BEFORE AND IS SOLD UNDER THE NAME KOTA LUOSTO
»
»
IN THE TANK THAT FORMS THE CASING, 30L OF WATER IS HEATED WHILE THE HEATER BURNS.
THE DURABLE ENAMEL FINISHING IS STYLISH AND EASY TO KEEP CLEAN.
»
»
Our tradition-bearing favourite product, the Kota L heater designed for enthusiastic sauna-goers, has been revamped.
Besides excellent durability and steam properties, the new Kota Luosto heater has adjustable legs and a cast iron glass
door with a sturdy handle. The wooden handle does not become hot, adding to the comfort of use of the heater. The heater
has the most massive ash drawer, making the heater very durable.
This environmentally friendly heater heats up quickly with only a few logs. The sauna heater is CE marked and has been
tested in Finland. The heater is also available with a stainless 30 l water tank (VS).
This sauna heater is CE marked and has been tested in Finland.
The tap can be turned any way desired.
Adjustable legs make the heater easy to install.
CLASSIC!
Technical specifications & safety clearances on page 10
6
Technical specifications & safety clearances on page 10
Kota inari
Thanks to the grid, the stones are displayed in an eye-catching way.
This environmentally friendly heater heats up with only a few logs.
»
»
This reliable heater lasts even for the next generations.
The sauna heater is provided with a glass door on a cast-iron frame and with adjustable legs.
»
»
The Kota Inari is a heater with character. The new sturdily built, framed heater also offers sustained and enjoyable steam
for frequent sauna-goers. The stones that remain naked to the eye add beauty to the heater. The previous Kota L and new
Luosto can be combined into the elegant Inari heater, using the optional stone grid. The wooden handle of the glass door
does not become hot, adding to the comfort of use of the heater.
This sauna heater is CE marked and has been tested in Finland.
The large amount of stones provides an excellent sauna experience.
7
KOTA KURU 14, 20, 14 VS, 14 ST
THIS PRACTICALLY SHAPED HEATER FITS EVEN IN NARROW SPACES.
THE CASING OF THIS SAUNA HEATER IS MADE OF BLACK PAINTED STEEL.
»
»
FOUR MODELS AVAILABLE: KURU 14, KURU 14 ST (TUNNEL), KURU 14 VS (WATER TANK) AND KURU 20
THE WOODEN HANDLES DO NOT GET TOO HOT.
»
»
The stylish and reliable Kota Kuru is an excellent sauna heater, which creates an authentic sauna experience and ensures
pleasant sauna steam. The glass door allows for enjoying the play of flames while sitting in the sauna. The tap in the front
of the model, provided with a water tank, can be installed either on the right or left side. The sauna heater is CE marked
and has been tested in Finland.
The Kota Kuru replaces the Narvi Mirva. As the connection sizes remain the same, the Kuru heater can be easily installed
in place of the Mirva.
This sauna heater is CE marked and has been tested in Finland.
8
KOTA CAULDRONS
A REMOVABLE STAINLESS STEEL INTERIOR FACILITATES THE CLEANING OF THE BOILER.
THE 80 L CAULDRON IS AVAILABLE IN ROUND BLACK-PAINTED AND STAINLESS STEEL-COVERED VERSIONS.
»
»
THE INSULATION MATERIAL IS VERMICULITE MASS, WHICH IS FIRE- AND MOISTURE RESISTANT.
THE 50 L CAULDRON IS AVAILABLE IN QUADRANGULAR FORM AND IS BLACK-PAINTED.
»
»
Kota cauldrons are suitable for summer houses and home saunas and create the atmosphere of bygone days. The boilers
can be used to heat large quantities of water. Heated water remains warm up to 24 h. Kota cauldrons are available in 50
and 80 litre sizes. The 80 l boiler covered with stainless steel can also be installed outside and features a chimney designed
for use in external conditions.
AVAILABLE 50 AND 80 L
Technical specifications & safety clearances on page 10
ENAMELLED CASING
9
Kota SAANA
THE CASING IS AVAILABLE PAINTED BLACK OR MADE OF STAINLESS STEEL.
THE HEATER IS EASILY SWITHED ON AND THE TEMPERATURE CAN BE ADJUSTED WITH THE EXTERNAL CONTROL PANEL.
»
»
TWO DIFFERENT POWER RATINGS: 6,8 KW AND 9,0 KW
AN 20 CM EXTENSION BASE (RST) AND AN INSTALLATION FLANGE (BLACK OR RST) ARE AVAILABLE.
»
»
In the Kota Saana electric sauna heater, good steam properties are combined with a stylish design. Thanks to the large
amount of sauna stones and its design, the Kota Saana has excellent heat accumulating properties and provides users
with soft, sustained steam. The electronic thermostat keeps the temperature at the required and pleasantly even level. The
set of the sauna heater also includes a stylish, external control panel that makes it very easy to use the sauna heater. The
standard length of the cable of the control unit is 3 m; 10 m cables are also optionally available.
10
*) For a 90° connective flue, the height of the bottom edge from the floor is 85 cm.**) For the 54 cm rear connection a hole may be made in the stone basket by cutting through three steel wires.
TECHNICAL SPECIFICATIONS
Room size 8–20 m3 8–20 m3 8–16 m3
Height 75 cm 75 cm 75 cm
Width - - -
Diameter 50 cm 60 cm 55 cm
Maximum weight / Weight of the stones 88 kg / 35 kg 98 kg / 35 kg 113 kg / 60 kg
Outer diameter of the connective flue 119 mm 119 mm 119 mm
Distance of the bottom edge of the connective flue from the floor
54 cm *) 85 cm *) 85 cm / 54 cm *)**
Volume of the water tank - 30 l -
Casing Black, enamelled Stainless steel Black steel grid
Room size 8–14 m3 8–14 m3 8–14 m3 10–20 m3
Height 68 cm 68 cm 68 cm 68 cm
Width 42 cm 43 cm 42 cm 46 cm
Depth 48 cm 64 cm 64 cm 48 cm
Maximum weight /
Weight of the stones84 kg / 35 kg 87 kg / 35 kg 93 kg / 35 kg 95 kg / 40 kg
Outer diameter of the
connective flue119 mm 119 mm 119 mm 119 mm
Distance of the bottom edge of the connective flue from the floor without adjustable legs
47 cm 62 cm 47 cm 47 cm
CasingPainted black
Painted black
Painted black
Painted black
Room size 5–8 / 8–14 m3
Height 92 cm
Width 32 cm
Maximum weight /
Weight of the stones90 kg / 80 kg
CasingPainted black
/ stainless steel
Luosto
14
KURU 14 vs14 ST (TUNNEL) 20
Luosto VS inari
saana 6,8 / 9,0 kW
11
Room size 5–8 / 8–14 m3
Height 92 cm
Width 32 cm
Maximum weight /
Weight of the stones90 kg / 80 kg
CasingPainted black
/ stainless steel
Height 73 cm 81 cm
Width 48 cm -
Depth 52 cm -
Diameter - 59 cm
Maximum weight 66 kg 85 kg
Outer diameter of the connective flue 115 mm 140 mm
Distance of the bottom edge of the connective flue from the floor 53 cm 58–61 cm
Casing Painted blackPainted black
/ stainless steel
80 l50 l, QUADRANGULARcauldrons
*) Safety clearance as measured from the height of the door of the sauna heater.
LUOSTO, LUOSTO VS, INARI KOTA KURU KOTA SAANA CAULDRONS
Safety clearances of Kota sauna heaters and water tanks between combustible materials and objects
recommended stones
Side 300* mm 250 mm 120 mm 150 mm
Front 500* mm 500 mm 120 mm 500 mm
Top 1 280 mm 1 350 mm 970 mm 1 000 mm
Rear 350* mm 250 mm 120 mm 150 mm
We recommend using Ø 10–15 cm olivine diabase sauna stones in wood-burning heaters, and Ø 5–10 cm olivine diabase
sauna stones in electrical heaters. Detailled heater-based recommendations can be found in installation and user manuals.
12
HEATERS, STOVES & SMOKERS
13
Heatable room size 60–120 m3
Rated power 6 kW
Height 88 cm
Width 51 cm
Depth 41 cm
Total weight 90 kg
Outer diameter of the connective flue
130 mm
Distance of the bottom edge of the connective flue from the floor
68 cm
TASOKOTA MINI
THE SMOKE FLUE CONNECTION IS EITHER FROM THE TOP OR REAR.
TASOKOTA MINI IS SUITABLE FOR SMALLER SPACES
»
»
TasoKota Mini is designed to be used as a small addi-
tional heater in residential premises. The fireplace is
equipped with state-of-the-art air adjustment technology
which allows precise adjustment of combustion air as well
as cleaner burning of the logs. Flames generate heat and
set the atmosphere through beautiful doors. The carefully
designed structure allows quick heating of even larger
rooms.
14
SAFETY DISTANCES ON PAGE 22
Heatable room size 60–120 m3
Rated power 6,5 kW
Height 111 cm
Width 60 cm
Depth 46 cm
Total weight 125 kg
Outer diameter of the connective flue
150 mm
Distance of the bottom edge of the connective flue from the floor
88 cm
ROYALKOTA
THE SMOKE FLUE CONNECTION IS EITHER FROM THE TOP OR REAR.
FLAMES SEEN THROUGH THE LARGE GLASS DOORS CREATE A COSY ATMOSPHERE.
»
»
The RoyalKota’s modern design and colouring is ideal
as an extra heater in a modern home. The fireplace is
equipped with state-of-the-art air adjustment technology
which allows precise adjustment of combustion air as well
as cleaner burning of the logs. The finished details and
technical solutions of the fireplace ensure compliance
with even the strictest quality requirements. Available in
graphite grey.
15
KOTA STOVE
ADJUSTABLE LEGS MAKE THE INSTALLATION EASY.
THIS EFFICIENT STOVE HEATS UP QUICKLY WITH ONLY A FEW LOGS
»
»
THE SMOKE FLUE CONNECTION IS EITHER FROM THE TOP OR REAR.»
Kota Stove is an efficient source of heating that respects
traditions. Its stylish cast iron glass door sets the atmos-
phere and the oven plate can be conveniently used to
make coffee or prepare a meal. The casing of the fireplace
is of black enamelled steel, which is very durable and easy
to keep clean.
Heatable room size 30–100 m3
Rated power 7 kW
Height 84 cm
Width 39 cm
Depth 59 cm
Total weight 73 kg
Outer diameter of the connective flue
122 mm
Distance of the bottom edge of the connective flue from the floor
66 cm
ROYALKOTA
16
Kota miniretro
EASY TO USE AND ADJUST.
EFFICIENT ENOUGH FOR LARGER SPACES
»
»
THE PRACTICAL SIZE MAKES THIS STOVE EASY TO INSTALL IN SMALLER SPACE.»
The MiniRetro with its round contours and beautiful
design leaves an imprint on the furnishings. Seen through
the glass door, flames create a warm atmosphere through.
Thanks to its low stature, the Kota MiniRetro also fits eas-
ily in a small room.
Heatable room size 40–110 m3
Rated power 4 kW
Height 78 cm
Width 36 cm
Depth 36 cm
Total weight 50 kg
Outer diameter of the connective flue
130 mm
Distance of the bottom edge of the connective flue from the floor
58 cm
SAFETY DISTANCES ON PAGE 22
17
Rated power 12 kW
Height 88 cm
Width 70 cm
Depth 46 cm
Total weight 200 kg
Outer diameter of the connective flue
150 mm
Distance of the bottom edge of the connective flue from the floor
14 cm
Locations
of the Kota
Cooker’s flue
apertures:
Furnace on the left Furnace on the right
KOTA COOKER
HIGHLIGHT OF THE KITCHEN
HEATS UP QUICKLY WITH ONLY A FEW LOGS.
»
»
The traditional Finnish made Kota Cooker is the cosy
centre of the kitchen. The Kota Cooker is equipped with
a cast iron hotplate and an oven. As such, it is a versatile
tool for preparing food. Durable, quality materials facilitate
its maintenance and ensure a long service life.
18
Rated power 6 kW
Height 83 cm
Width 74 cm
Depth 50 cm
Total weight 125 kg
Outer diameter of the connective flue
150 mm
Distance of the bottom edge of the connective flue from the floor
64 cm
SAFETY DISTANCES ON PAGE 22
RAME COOKER
THIS EFFICIENT COOKER HEATS UP QUICKLY WITH ONLY A FEW LOGS.
FLAMES CREATE A COSY ATMOSPHERE THROUGH THE GLASS DOOR.
»
»
The Rame Cooker is equipped with a cast iron hotplate
and an oven. As such is a versatile tool for preparing food.
This stove, which pays respect to tradition, fits perfectly in
a traditional or modern kitchen. Food preparation is easy
while the stove heats up the room.
19
KOTA SMOKERThe Kota Savustin is an easy-to-use quality product for
smoking. It has been designed for outdoor use in both
homes and summer houses. The smoker is fully enam-
elled. Enamelling makes the surface beautiful, durable and
easily maintainable. The smoker can also be used as a
coal-operated grill.
Height 80 cm
Width 43 cm
Depth 65 cm
Total weight 41 kg
KOTA ELECTRIC SMOKERThe Kota electric smoker has been designed for outdoor
use in both homes and summer houses. Its precise ther-
mometre allows the temperature to be kept at the appro-
priate level. Enamelled steel surfaces are beautiful, easily
maintainable and durable. It should be remembered that
smoking chips (alder chips) must be placed at the bottom
of the oven. A grease sheet must be placed on the chips
to prevent grease dripping on them.
Power 2 kW
Height 63 cm
Width 43 cm
Depth 48 cm
Total weight 26 kg
Fuse 10 A
Parts & accessoriesKota’s additional parts and accessories are compatible with Narvi heaters.
Cauldrons
Kota cauldrons allow for heating large quantities of water.
Thanks to fire-resistant vermiculite insulation, heated
water remains warm up to 24 h. The inner boiler is made of
wear-proof stainless steel and can be easily removed for
cleaning. Cauldrons are available in 50 and 80 litre sizes.
Sauna stones
Durable and traditional Kota sauna stones are available
in 5–10 cm and 10–15 cm sizes and 20 kg packages.
Rounded Kota sauna stones are 5–10 cm and available
in a 15 kg package. White Kota heater stones, intended
to be used as surface stones, are suitable for all electrical
and continuous burning heaters. One crate contains 10 kg
of white sauna stones.
Connective pipes
The connective flues are made of 2.0 mm steel sheet and
painted with heat-resistant paint. A versatile selection of
Kota connective flues allows installation of heaters and
furnaces in the most complicated structures. See details
and measurements: www. narvi.fi
Stonecage
The stonecage makes use of the warmth of the connec-
tive flue. Also, the steam is more endurable as the steam
water runs from the stones down to the actual heater.
Stonecage may also be stacked, thus adding more style
to the sauna. Stonecage is available painted in black and
in stainless steel.
365
125 25
0
500
1 00
0
605
260
ø 118
ø 123
ø 123
ø 123
375
90˚ø 123 ø 127 ø 127 ø 127
60˚
20
Protective solutions
Narvi offers installation-ready solutions for safe reduction
of safety clearances of different furnaces. The protective
walls also help to avoid water spray on the wooden wall
and between the logs. The protective walls are made of
stylish brushed chromed stainless steel. Ready-made
protection finalizes the whole installation.
The protective walls help to save space and offer more
possibilities for placing the sauna heater in the most suit-
able location. Walls are available in one and two tiers.
Single protective walls are available in two different sizes
and make it possible to reduce the safety clearance of
furnaces by a max 50%. Double protective walls are avail-
able in three different models, which can be united in
one system, if necessary. Double protective walls help to
reduce the safety clearance by a max 75%.
By using an installation base the sauna heater can also
SMOKING FOIL
Front plate Installation base Roof protection Protective wall, single
Protective wall, double
Chimney
protection
921126 Protective wall 1, single 65 x 3 x 115
921125 Protective wall 2, single 75 x 3 x 115
804001 Protective wall 1, double 76 x 3,7 x 123
804002 Protective wall 2, double 65 x 3,7 x 123
804003 Protective wall 3, double 59 x 3,7 x 70/123
921122 Frontplate, rst 55 x 45
Dimensions (cm)
921123 Chimney protection, rst Ø 25 x 50
921124 Roof protection, rst 65 x 65
921117 Installation base, rst 55 x 62
921121 Installation base, rst 60 x 75
921119 Installation base (VS), rst 55 x 75
802136 Installation base (octagon), rst 60 x 60
be installed in a sauna with a wooden floor or boards under
which there is floor heating or water insulation. If the floor
of the room is inclined, the sauna heater can be levelled by
means of adjusting the legs of the base. The installation
base is made of stainless steel. The size of the installation
base should match the size of the sauna heater. The instal-
lation bases are available in five different models.
Our product range of protective solutions also includes
ceiling protection, front sheet steel and smoke flue
protection. More detailed information about protective
solutions can be found in the table below.
Smoking is now easier and cleaner. Thanks to the smoking
foil, the fish and meat you smoke is juicer than ever as the
grease is caught on the base made from the smoking foil.
The smoking foil facilitates cleaning since the grease does
not drip to the bottom of the oven. Foil size 40 x 80 cm.
21
22
DESIGN DRAWINGS
1
2
3
4
KotaKota electric smoker1) Smoking tray 2) Grease sheet / coal oven
3) Smoking plate 4) Smoke oven lid
1
2
3
4
5
6
77
Kota smoker1) Smoking tray 2) Draught regulator
3) Grease sheet / coal base 4) Smoking plate
5) Smoke oven lid 6) Smoke pipe
7) Plate girder
SAFETY DISTANCES
Side 400 mm 250 mm 200 mm
Front 1 000 mm 1 000 mm 1 000 mm
Top 1 000 mm 1 000 mm 1 000 mm
Rear 400 mm 250 mm 200 mm
Side 200 mm
Front 1 000 mm
Top 1 000 mm
Rear 200 mm
Tasokota Mini, royal kota, kota miniretro kota COOKERkota kamiina RAME COOKER
Steel flue 15 Steel flue 24Diameter (Ø) 125 mm 150 mm
Extension has insulation 30 cm / 60 cm 60 cm / 120 cm
Connection pipes,not insulated
100 cm 13 cm
The Kota Steel fue is a high-quality, safe smoke flue for sauna
heaters and other furnaces. The delivery kit also includes a safe
installation-ready solution for feeding the smoke flue through
the roof and attic floor. A valve is also included.
The length of the insulated section of the Kota Steel flue 15
smoke flue (Ø 125 mm) is 1 500 mm and this includes all parts
needed for installation. The basic package is about 2 500 mm
without extensions. Extension sections available for the smoke
flue: 300 mm and 600 mm.
The length of the insulated section of the Kota Steel flue 24
smoke flue (Ø 150 mm) is 2 400 mm and this includes all parts
needed for installation. The basic package is about 2 530 mm
without extensions. Extension sections available for the smoke
flue: 600 mm and 1 200 mm.
The delivery kit of Steel flue smoke flues contains everything needed for installing and connecting a smoke flue.
The external casing of the smoke flue is made of zinc-coated steel finished with black heat-resistant paint and the inner tube is made of stainless steel.
The safe Kota Steel flue is provided with CE-marking confirming that the flue fulfils the requirements of fire safety class T600.
The capacity of the water tank is 22 litres. It is only suitable with Kota Steel flue 15.
»
»
»
»
Kota Steel flue 15 & 24 Everything in one package!
Rainfall cover of the flue
Flue partKota Steel flue 15: 300 mmKota Steel flue 24: 1 200 mm
Rubber sealing of the roof
Support / seal of the base
To the flue channel
Ceiling duct casingHeight 400 mm
Ceiling duct insulationHeight 200 mm
Anti-steam flange
Ceiling duct flange0-22 degrees
Fastening ring
Portion of the
insulated valve1 200 mm
Uninsulated connection pipeKota Steel flue 15: 1 000 mmKota Steel flue 24: 130 mm
23
Narvi heaters provide a versatile and high-quality
selection of wood-burning and electric sauna
heaters for pleasant everyday sauna bathing.
All sauna heaters are Finnish designed and
made.
v1/2015
6 4 1 8 5 3 0 0 1 0 1 2 5
NARVI Oy pidättää oikeudet tuotteisiin tuleviin muutoksiin.
Design you own sauna!
SAUNASIMULAATTORI
Yrittäjäntie 14, FI-27230 Lappi
tel. +358-207 416740
www.narvi.fi
Choose the right heater:
kiuasvalitsin.fi
Get inspired by the sauna designer!
Examples found in this catalogue. narvi.fi
NARVI Oy pidättää oikeudet tuotteisiin tuleviin muutoksiin.NARVI OY reserves the right to make changes to their products.
Made by NARVI Finland
5/2016 PJG.FI