track and hardware for commercial and residential door … · line of specialty pocket door frames...
TRANSCRIPT
KrisTrack® Full Line Catalogue • Revision (12) August 27, 2019
Track and Hardware Specialists
PRINTED CATALOGUE MAY NOT BE UP TO DATE. ALWAYS REFER TO WEBSITE FOR MOST UP TO DATE CONTENT.
TRACK AND HARDWARE FOR COMMERCIAL AND RESIDENTIAL DOOR APPLICATIONSBIFOLD DOOR TRACK, SLIDING DOOR TRACK, HARDWARE AND ACCESSORIES, POCKET DOOR FRAMES
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 2 © Copyright KrisTrack®
About A.K. Draft Seal Ltd. & Kristrack
Tomorrow’s Innovative Solutions for Today’s Doors & Windows
General Information & Terms
This KrisTrack® Catalogue supersedes all previous versions. Please visit www.KrisTrack.com for our full terms & conditions, freight, warranty, returns & allowances, claims policy, & other general information.
Product drawings throughout this catalogue are representations of the product size, dimensions, shape, etc. Changes & updates to this catalogue may occur without notice. This may include, but not limited to, specifications, product availability & product materials. A. K. Draft Seal Ltd. and KrisTrack® MFG. will not be held liable for any changes to this catalogue, or products depicted in this catalogue that may not match our CAD drawings.
KrisTrack® MFG., a division of A. K. Draft Seal Ltd. will not be liable for defects or damages arising from improper installation, product modification, incorrect application or storage of product. Written notice of damages must occur within the warranty period. Liability shall be limited to the replacement of product or component determined to be defective & shall not include costs arising from removal or reinstallation of product. Cost of replacement shall not exceed original purchase price. No other claims will be allowed. In no event shall liability be extended to include punitive, incidental or consequential damages arising from use of KrisTrack® MFG. products. This is the sole warranty given by KrisTrack® MFG., a division of A. K. Draft Seal Ltd. No other warranty implied or expressed shall be allowed.
By purchasing our products you agree to our Terms & Conditions herein stated.
Draft Seal Co. was founded in 1960 by Anton Kamensek then incorporated in 1973 as A. K. Draft Seal Ltd. During the 1990s we became known by our trademark name DraftSeal®, the largest manufacturer of weatherstrip products in Western Canada. After his retirement in the early nineties, his son, Chris, who had been with the company since 1973, purchased DraftSeal® and started the KrisTrack® division. The year 2010 marked our 50th year in business as a manufacturer and supplier of weathersealing and door sill products for commercial and residential applications. In 2013 we introduced our new DS1 Storm - Sill System to comply with the new building code that requires exterior door sill systems to be tested for air, water and structural. We will be introducing our new DSF1 Accordion Screen, which is integrated with our DS1 Storm - Sill System. Our manufacturing centre in British Columbia, Canada, produces a line of weatherstrip and sill products for the pre-hung door industry as well as a do-it-yourself line of residential weatherstripping for the consumer market.
KrisTrack® Manufacturing Ltd., was formed in 1991 to compliment the DraftSeal® line of weathersealing and door sill products. KrisTrack®, a division of A. K. Draft Seal Ltd., manufactures and supplies sliding and bifold door track with accompanying hardware and accessories. Applications include residential and commercial. Our manufacturing centre in British Columbia, Canada, also produces a line of specialty pocket door frames custom made in knock down, half knock down, and ready-made styles.
® ®
Weathersealing Specialists Since 1960 - Weatherstripping, Thresholds, Sweeps & Astragals
Interior Track And Hardware For Sliding, Bifold And Pocket Doors
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 3© Copyright KrisTrack®
INDEX
KTA2FGUIDE 52, 66, 78
KTA2SERIES 66, 67
KT5FASCIA 18, 19
KT6FC (FASCIA) 22, 25
KTA7GUIDE 52, 68, 69
KTA7SERIES 68, 69
KTA8SERIES 70-76, 79
KTA8SPACER 76, 79
KTA8S10MM 76, 79
KT10TRACK 36
KT15HANGER 35, 40
KT15KIT-2L 35
KT15PIVOT 35, 54
KTSD15SPACER 79
KT19C 46, 47, 49
KT19D 46, 47, 49
KT20A 46, 47
KT20D 46, 47
KT23BLVE 46
KT23D 46, 48
KT23D-RADIUS156 37
KTSD30SPACER 79
KT31HANGER 27, 39
KT34TRACK 34, 39
KT34FLATH 34, 39
KT34OFFSETH 34, 39
KT35HANGER 5, 7, 40
KT35KIT 5
KT35PDKIT 7
KT38HANGER 5, 7, 40
KT38KIT 5
KT38PDKIT 7
KT38SOFTCLOSEH1 14-17
KT38SOFTCLOSEH2 14-17
KT40ECWSINGLE 18
KT40HANGER 5, 7, 40
KT40KIT 5, 20
KT40PDKIT 7
KT40TRACK 4, 6, 10, 14
KT41C-RADIUS156 38
KT41D-RADIUS156 38
KT41HANGER 30, 32, 41
KT82HANGERSS 30, 32, 41
KT41KIT 30
KT41KITSS 30
KT41TRACK 30, 32
KT43KIT 11
KT47C (FASCIA) 20, 21
KT47ECR 21
KT47ECL 21
KT47TRACK 20, 21
KT50KIT 9
KT50TRACK 8, 16, 40
KT51KIT 33
KT51KITSS 33
KT52KIT 11
KT53KIT 11
KT55KIT 9
KT58KIT 9
KT60ECDOUBLE 26
KT60ECSINGLE 26
KT60FGUIDE 52
KT60HANGER 22-25
KT60KIT 23, 25
KT60TRACK 22, 41
KT61ECSINGLE 26
KT61ECSINGLEWOOD 26
KT61TRACK 24, 26, 41
KT70D-RADIUS156 38
KT70HANGERSS 28, 41
KT70RPLATE 28
KT70TRACK 28, 41
KT81 55
KT84 55
KT96 55
KT101 12, 49, 52
KT102 4, 50
KT103 12, 49
KT106 8, 50
KT107 6, 51
KT110 51
KT111 51
KT112 15, 52
KT113 4, 20, 51
KT114 5, 47, 49
KT115 54
KT116 5, 21, 51
KT119 47
KT120 47
KT122 7, 53, 58
KT123 53
KT124 4, 53
KT125 4, 21, 53
KT127SS1 46, 48
KT127SS2 46, 48
KT128 28, 29, 53
KT129 31, 33, 53
KT142 31, 54
KT143 55, 60, 62
KT144 55, 60, 62
KT146 4, 5, 54
KT147 31, 33, 54
KT151 5, 54
KT155 55
KT156 11, 12, 49
KT158 27
KT159 27
KT166 8, 55
KT168 55
KT172-40 80
KT172-80 80
KT174 55, 77, 79
KT175 55
KT176 55
KT177 55
KT178 55
KT179CH 55
KT189 36, 55
KT190 36, 54
KT191 36, 54
KT192 36, 54
KT193 36, 54
KT194 36, 54
KT195 36, 54
KT197 36, 54
KT198 54
KT256 65
KT300BGT 42, 43
KT400BGT 44, 45
KT502 65
Pocket Door FramesKT-FRAME-RM 56, 59
KT-FRAME-HDK 56, 59
Specialty Pocket Door FrameKT MONDOOR 80 - 83
Pocket In A BoxKT1035PDKIT 59, 63
KT1038PDKIT 59, 63
KT1040PDKIT 59, 63
KT1000 SERIES 60, 61
KT1100SERIES 60, 61
KT1200SERIES 62, 63
KT1300SERIES 62, 63
Open Rail SeriesKTA2 OPEN RAIL 66, 67
KTA7 OPEN RAIL 68, 69
KTA8 OPEN RAIL 70-76, 79
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 4 © Copyright KrisTrack®
1-3/8” (35mm)
wall
KT146 top track wall mount bracket
from top of trackto top of doormin = 2-1/8”
(54mm)max = 2-3/8” (60mm)
KT40TRACK
KT5FASCIAoptional
1-23/32” (43.50mm)
KT40 Series: Single Track For Sliding Doors, Ceiling Or Wall Mount
1-9/32” (32mm)
1-7/32”(31mm)
from top of trackto top of doormin = 2-1/8” (54mm)max = 2-3/8” (60mm)
KT40TRACK
1-3/8” (35mm) or1-3/4“ (44.45mm) or
2-1/4” (57mm)door thickness
KT102floor guide
31/64” (12.3mm)
min 3/16” (8mm)max 5/8” (15.8mm)
1”(25.4mm)
finished floor line
Ceiling mount
FULL SCALE
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.4mm)
TRACK: Extruded aluminum, mill finish.
HANGER: Steel plated or cast carrier, 4 nylon wheels, ball bearing.
OPTIONS: KT23 floor channel extruded aluminum, bronze anodized with PVC insert. Also available KT20 & KT19 floor channels. KT146 wallmount brackets. KT151 face door mount bracket.
KIT INCLUDES:
Hangers (2 ea)
KT102 floor mounted guide (2 ea)
KT113 adjustable bottom guide (1 ea)
KT125 Intrack bumper stop, optional
KT125KT124 Intrack hanger stop for KT35 & KT38 kit only, optional
KT113 adjustable bottom guide
KT155 wrench (1 ea)
Wall mount
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 5© Copyright KrisTrack®
KT40 Series: Single Track For Sliding Doors, Ceiling Or Wall Mount
One Track, Three Hanger Choices:
OPTIONS Ceiling mount with hanger adapter
KT23 door bottom channel aluminum with pvc insert
KT127 roller guidefinished floor line
KT151hanger adapter
bracket, face-mounted on door
1-11/16”(43.5mm)
1-1/2”(38mm)
1-1/8”(28.5mm)
KT146 Wall-mount bracket (metal) for KT40 Series track, order separately
KT116 Adjustable bottom guide (metal & plastic) jamb mounted for wall mounted door 1-3/8” or 1-3/4” door thickness
KT114 Bottom guide (plastic), spring loaded, for KT19 floor channel
KT35KIT for 1 door application: KT35HANGER (2 ea) hangers, KT102 (2 ea) floor mounted guide, KT113 (1 ea) adjustable bottom guide for wall mounted door, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting doors order two kits (KT35KIT) and two (KT125) intrack door stops.Residential, max door weight: 100 lbs. (45 kg) = 2 hangers
KT38KIT for 1 door application: KT38HANGER (2 ea) hangers, KT102 (2 ea) floor mounted guide, KT113 (1 ea) adjustable bottom guide for wall mounted door, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting doors order two kits (KT38KIT) and two (KT125) intrack door stops.Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT40KIT for 1 door application: KT40HANGER (2 ea) hangers, KT102 (2 ea) floor mounted guide, KT113 (1 ea) adjustable bottom guide for wall mounted door, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting doors order two kits (KT40KIT) and two (KT125) intrack door stops.Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
KT120 Bottom guide for KT20 door bottom channel
KT120
KT20 door bottom channel
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 6 © Copyright KrisTrack®
KIT INCLUDES:
KT107 jamb mounted metal guide for 1-3/8” (35mm) door thickness
3-1/4” (82mm)
1-3/8” (35mm)door thickness
KT40TRACK
3-1/2” (88.9mm)4-1/2” (114.3mm)
2-3/4”(71mm)
5/8”(17mm)
3/8”(9.5mm)
1-1/4” (31.7mm)
min = 2-1/8” (54mm)max = 2-3/8” (60mm)
1-9/32” (32mm)
1-7/32”(31mm)
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.4mm)
TRACK: Extruded aluminum, mill finish.
HANGER: Steel plated or cast carrier, 4 nylon wheels, ball bearing.
OPTIONS: KT23 floor channel extruded aluminum, bronze anodized with PVC insert. Also available KT20 & KT19 floor channels.
KT40PDF Series: Single Track For Pocket Frames
KT107 Door guide (1 ea)
Hangers (2 ea)
KT155 wrench (1 ea)
FULL SCALE
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 7© Copyright KrisTrack®
One Track, Three Hanger Choices:
OPTIONS
KT35PDKIT for 1 door application: KT35HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors order two kits (KT35PDKIT).Residential, max door weight: 100 lbs. (45 kg) = 2 hangers
KT38PDKIT for 1 door application: KT38HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors order two kits (KT38PDKIT).Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT40PDKIT for 1 door application: KT40HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors order two kits (KT40PDKIT).Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
KT23 door bottom channel
KT127 roller guidefinished floor line
KT40PDF Series: Single Track For Pocket Frames
KT122 Bumber stop, nail on, white, order separately.
KT114 Bottom guide (plastic), spring loaded, for KT19 floor channel
KT120
KT20 door bottom channel
KT120 Bottom guide for KT20 door bottom channel
KT125 Intrack bumper stop
KT125
KT124 Intrack hanger stop for KT35 & KT38 kit only, optional
KT81 steel stif fener, 81”KT84 steel stif fener, 84” KT96 steel stif fener, 96”
55/64”(22mm)
7/16”(11mm)
Pocket Door Frame Stiffeners
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 8 © Copyright KrisTrack®
KT50 Series: Track For Bypass Sliding Door, Ceiling Mount
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.4mm)
TRACK: Extruded aluminum, mill finish.
HANGER: Steel plated or cast carrier, 4 nylon wheels, ball bearing.
OPTIONS: KT20 extruded aluminum channel with KT120 steel plate, nylon swivel guide, minimum door thickness 1-3/8” (35mm) when using guide channel. Oblong flush pulls size 1-5/8” (410mm) x 4-1/2” (1143mm) available in finishes, KT174DCH (dull chrome), KT174BRZ powder coat bronze, KT174CH bright chrome.
1-3/16”(30mm)
5-5/16” (135mm) finished floor line
3” (77mm)
KT50TRACK(1 piece, dual track)
from top of trackto top of doormin = 2-1/8” (54mm)max =2-3/8” (60mm)
1-3/8” (35mm) or1-3/4” (44.45mm)
door thickness
KT106 guide can beconverted for 1-3/4”
door thickness
1-3/8” (35mm) or1-3/4” (44.45mm)
door thickness
1-7/32”(31mm)
13/16”(20.5mm)
KT5FASCIAoptional fascia, order separately
3” (7
6.2m
m)
5/16” (8mm) 9/16” (14mm)
KT106floor mounted
convertible guide
KT166 flush pull (2 ea)
KT106 Convertible floor guide (1 ea)
KIT INCLUDES:
Hangers (4 ea)
KT155 wrench (1 ea)
FULL SCALE
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 9© Copyright KrisTrack®
KT50 Series: Track For Bypass Sliding Door, Ceiling Mount
One Track, Three Hanger Choices:
OPTIONS
KT55KIT for 2 door application: KT35HANGER (4 ea) hangers, KT106 (1 ea) convertible floor mounted guide, KT166 (2 ea) chrome finger pulls, KT155 (1 ea) wrench, installation sheet plus all screws.Residential, max door weight: 100 lbs. (45 kg) = 2 hangers
KT58KIT for 2 door application: KT38HANGER (4 ea) hangers, KT106 (1 ea) convertible floor mounted guide, KT166 (2 ea) chrome finger pulls, KT155 (1 ea) wrench, installation sheet plus all screws.Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT50KIT for 2 door application: KT40HANGER (4 ea) hangers, KT106 (1 ea) convertible floor mounted guide, KT166 (2 ea) chrome finger pulls, KT155 (1 ea) wrench, installation sheet plus all screws.Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
KT174 Flush door pull
1-3/4” (44.45mm)
finished floor line
15/16”(24mm)
7/8”22mm
1/4” (6mm)
KT23 door bottomchannel
KT127 roller guide
KT19KT114
finished floor lineKT114 Bottom guide (plastic), spring loaded, for KT19 floor channel
KT120
KT20 door bottom channel
KT120 Bottom guide for KT20 door bottom channel
KT125 Intrack bumper stop
KT124 Intrack hanger stop for KT55 & KT58 kit only, optional
1-3/8” (35mm)
clearance range:min=9/16” (14mm)max=1-1/8” (28.5mm)
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 10 © Copyright KrisTrack®
KT53 Series: Triple Track For Multi-Sliding Doors, Ceiling Mount
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.4mm)
TRACK: Extruded aluminum, mill finish.
HANGER: Steel plated or cast carrier, 4 nylon wheels, ball bearing.
OPTIONS: KT20 extruded aluminum floor channel with KT120 steel plate, nylon swivel guide, minimum door thickness 1-3/8” (35mm) when using floor guide channel. Oblong flush pulls size 1-5/8” (410mm) x 4-1/2” (1143mm) available in finishes, KT174DCH (dull chrome), KT174BRZ powder coat bronze, KT174CH bright chrome.
Spacing For 1-3/8” Door Thickness
KT166 flush pull (3 ea)
KT102 floor mounted guide (2 ea)
Hangers (6 ea)
KIT INCLUDES:
KT106 convertible floor guide (2 ea)
15/32”(12mm)
3/8”(9.5mm)
3/8”(9.5mm)
15/32”(12mm)
4-3/4” (120mm)1-1/4” (32mm)
from topof track totop of door
min =2-1/8”
(54mm)max =2-3/8”
(60mm)
1-3/8” (35mm) 1-3/8” (35mm) 1-3/8” (35mm)
5-5/16” (135mm)7-1/16” (179mm)
1-3/16”(30mm)
5/16” (8mm) 9/16” (14mm)
finished floor line
KT40TRACK(X 3)
one KT102 floor guide shown
One KT106 floor guide shown in front
One KT106 floor guide
shown in backKT155 wrench (1 ea)
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 11© Copyright KrisTrack®
KT53 Series: Triple Track For Multi-Sliding Doors, Ceiling Mount
One Track, Three Hanger Choices:
KT43KIT for 3 door application:KT35HANGER (6 ea) hangers, KT102 (2 ea) floor mounted guide, KT106 (2) convertible floor guide, KT166 (3 ea) chrome finger pulls, KT155 (1 ea) wrench, installation sheet plus all screws. Residential, max door weight: 100 lbs. (45 kg) = 2 hangers
KT52KIT for 3 door application: KT38HANGER (6 ea) hangers, KT102 (2 ea) floor mounted guide, KT106 (2) convertible floor guide, KT166 (3 ea) chrome finger pulls, KT155 (1 ea) wrench, installation sheet plus all screws. Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT53KIT for 3 door application: KT40HANGER (6 ea) hangers, KT102 (2 ea) floor mounted guide, KT106 (2) convertible floor guide, KT166 (3 ea) chrome finger pulls, KT155 (1 ea) wrench, installation sheet plus all screws. Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
5-1/2” (140mm) 7/8”
(22mm)
3/8” (9.5mm)
3/8” (9.5mm)
7/8”(22mm)
1-3/4” (44.45mm)
door thickness
1-3/4” (44.45mm)
door thickness
1-3/4” (44.45mm)
door thickness
KT156
KT40TRACKwhen using 1-3/4” door the gap between tracks is 7/8” (22mm)
SPACING FOR 1-3/4” DOOR THICKNESSSPACING FOR 1-3/8” DOOR THICKNESS
SPACING FOR 1-3/4” DOOR THICKNESS
15/32”(11.5mm)
1-3/8” (35mm) 1-3/8” (35mm)
3/8” (9.5mm)3/8” (9.5mm)
1-3/8” (35mm)
KT101floor guide
KT103KT114
finished floor line
KT156
1-3/4” (44.45mm)
1-3/4” (44.45mm)
1-3/4” (44.45mm)
3/8” (9.5mm)
3/8” (9.5mm)
One KT106 floor guide shown in front
One KT106 floor guide shown in back
One KT102 floor guide shown
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 12 © Copyright KrisTrack®
15/32” (12mm) 15/32” (12mm)4-3/4” (120mm)
11/32” (9mm)
1-3/8” (35mm)
15/32” (11.5mm)
11/32” (9mm)
1-1/4” (32mm)
1-7/32”(30.5mm)
KT19 floor channel aluminum
The Multi-Slide interior sliding system is designed to slide shutters or doors in a residential or commercial applications. A number of doors may be installed as parallel sliding. Collectors can be used to pick up one panel with the next as they are operated.
Example of 3 door system
BOTTOM GUIDING OPTION 1
nylon collectors are fastened to top and bottom of panel stiles
PANEL SIZING Maximum recommended panel dimensions: width = 48” (1220 mm) wide height = 96” (2438 mm) high
3 doors parallel sliding clear past opening WALL
clearance range: min = 9/16” (14mm)max = 1-1/8” (28.5mm)
KT101 KT103
KT156
KT156
KT19
Orientation of spacers and shims is the same for either 1-3/8” or 1-3/4” door thickness
KT102
KT102
KT102
KT106
KT106
KT102
KT106
KT106
KT53 Series: Triple Track For Multi-Sliding Doors, Ceiling Mount
1-3/8” (35mm) 1-3/8” (35mm)
11/32”(9mm)
1-3/8” (35mm)
11/32”(9mm)
KT156
KT19KT114 finished floor line
A) spacer B) spacer & shim
A
AB
BB
B
KT156 (2 piece set) KT101KT103
WALL
BOTTOM GUIDING OPTION 2
BOTTOM GUIDING OPTION 1
Standard Hardware Kit
placement of KT103 is here
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 13© Copyright KrisTrack®
11/32” (9mm)
KTMS Series: Double Track For Sliding Doors, Ceiling Mount
2 doors parallel sliding clear past opening
11/32” (9mm)
1-3/8” (35mm)
KT40TRACK KT40TRACK
KT156
KT156KT114
KT19finished floor line finished floor line
WALL
WALL
The interior sliding door system is designed to slide shutters or doors in a residential or commercial applications. A number of doors may be installed as parallel sliding. Collectors can be used to pick up one panel with the next as they are operated.
Example of 2 door system
BOTTOM GUIDING OPTION 3
BOTTOM GUIDING OPTION 2
BOTTOM GUIDING OPTION 1
PANEL SIZING Maximum recommended panel dimensions: width = 48” (1220 mm) wide height = 96” (2438 mm) high
WALL
KT156
KT103KT101
31/64” (12.3mm)
1”(25.4mm)
KT102
KT102
finished floor line
min 5/16” (8mm)max 5/8” (15mm)
1-3/8” (35mm) 1-3/8” (35mm)
KT156 Collector (nylon) for Multi-Slide doors, two piece set. Not included wiht kit, order separately.
shim spacer
BOTTOM GUIDING OPTION 1
AB B
KT101KT103
WALL
A) spacer B) spacer & shim
KT156 (2 piece set)
nylon collectors are fastened to top and bottom of panel stiles
11/32” (9mm)
clearance range:min=9/16” (14mm)max=1-1/8” (28.5mm)
placement of KT103 is here
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 14 © Copyright KrisTrack®
KT38SC (Soft Close) Residential Series: Single Track For Sliding Doors, Ceiling Mount
1-1/4” (32mm)
1-1/4”(32mm) vertical adjustment
from top of track
to top of doormin =
2-1/8” (54mm)max =
2-3/8”(60mm)
1-3/8” (35mm) or 1-3/4” (44.45mm)
door thickness
KT40TRACK
23/32”(18mm)1/4” (6mm)
FULL SCALE
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.4mm) MIN & MAX DOOR THICKNESS: 1-3/8” to 1-3/4” (35mm to 44.45mm)
MAX DOOR HEIGHT: 84” (2134mm)TRACK: Extruded aluminum, mill finish. HANGER: Steel plated or cast carrier, 4 nylon wheels, ball bearing.
OPTIONS: KT5Fascia, extruded aluminum painted white, with end caps. KT23 floor channel extruded aluminum, bronze anodized with PVC insert. Also available KT20 & KT19 floor channels.
KT38SOFTCLOSEH1 KIT INCLUDES
SOFT CLOSE ONE WAY
KT38SOFTCLOSEH2KIT INCLUDES
SOFT CLOSE BOTH WAYS
Soft close & auto release activator
(1 ea)
Soft close & auto release activator
(2 ea)
floor guide (2 ea)
floor guide (2 ea)
Intrack stop included with hanger (1 ea)
KT155 Wrench (1 ea)
KT155 Wrench (1 ea)
Soft close assembly & hanger
Soft close assembly
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 15© Copyright KrisTrack®
KT112 Floor guide, plastic, for wood doors
KT38SC (Soft Close) Residential Series: Single Track For Sliding Doors, Ceiling Mount KT38SC (Soft Close) Residential Series: Single Track For Sliding Doors, Ceiling Mount
KT5FASCIA optional fascia, painted white
Ceiling mount application
One Track, Two Hanger Choices:
KT38SOFTCLOSEH1 for 1 door application: (1 ea) Soft close assembly on one side, hanger on the other side, (1 ea) intrack stop, (2 ea) floor guides, (1 ea) soft close & auto release activator, (1 ea) wrench, installation sheet plus all screws.Max door weight: 80 lbs. (36 kg). Min door width: 24” (610mm)
KT38SOFTCLOSEH2 for 1 door application: (2 ea) soft close assemblies, (2 ea) floor guides, (2 ea) soft close & auto release activator, (1 ea) wrench, installation sheet plus all screws.Max door weight: 80 lbs. (36 kg). Min door width: 32” (813mm)
OPTIONS
KT146 wallmount bracket
Wallmount application
5/16” (8mm)
7/8” (22mm)
3/8” (9.5mm)
2-9/32" (58mm)
FULL SCALE
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 16 © Copyright KrisTrack®
KT50SC Residential Series: Ceiling Mount Bypass Sliding Door Track & Hardware
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.4mm) MIN & MAX DOOR THICKNESS: 1-3/8” to 1-3/4” (35mm to 44.45mm)
MAX DOOR HEIGHT: 84” (2134mm)TRACK: Extruded aluminum, mill finish. HANGER: Steel carrier, plated, 4 nylon wheels, ball bearing.
OPTIONS: KT5FASCIA, extruded aluminum painted white, 10 lengths available. KT23 floor channel extruded aluminum, bronze anodized with PVC insert. Also available KT20 & KT19 floor channels.
1-3/8” (35mm) or1-3/4” (44.45mm)
door thickness
KT50TRACK
3” (76.2mm)
1-3/8” (35mm) or1-3/4” (44.45mm)
door thickness
vertical adj.from top
of track to top of door
min = 2-1/8”
(54mm)max = 2-3/8”
(60mm)
1/16”(1.9mm) 23/32”
(18mm)1/4” (6mm)
3/8”(9.5mm)
Closet Application Ceiling Mount
KT38SOFTCLOSEH1 KIT INCLUDES
SOFT CLOSE ONE WAY
KT38SOFTCLOSEH2KIT INCLUDES
SOFT CLOSE BOTH WAYS
Soft close & auto release activator
(1 ea)
Soft close & auto release activator
(2 ea)
floor guide (2 ea)
floor guide (2 ea)
Intrack stop included with hanger (1 ea)
KT155 Wrench (1 ea)
KT155 Wrench (1 ea)
Soft close assembly & hanger
FULL SCALE
Soft close assembly
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 17© Copyright KrisTrack®
KT50SC Residential Series: Ceiling Mount Bypass Sliding Door Track & Hardware KT50SC Residential Series: Ceiling Mount Bypass Sliding Door Track & Hardware
KT5FASCIA optional fascia
Room Partition Application - Ceiling Mount Closet Application
One Bipass Track, Two Soft Close Choices:
OPTIONS
Soft Close one direction
Soft Close both directions
KT38SOFTCLOSEH1 for 1 door application:(2 kits required for bipass application) (1 ea) Soft close assembly on one side, hanger on the other side, (1 ea) intrack stop, (2 ea) floor guides, (1 ea) soft close & auto release activator, (1 ea) wrench, installation sheet plus all screws.Max door weight: 80 lbs. (36 kg). Min door width: 24” (610mm)
KT38SOFTCLOSEH2 for 1 door application:(2 kits required for bipass application) (2 ea) soft close assemblies, (2 ea) floor guides, (2 ea) soft close & auto release activator, (1 ea) wrench, installation sheet plus all screws.Max door weight: 80 lbs. (36 kg). Min door width: 32” (813mm)
KT112 Floor guide, plastic, for wood doors
5/16” (8mm)
7/8” (22mm)
3/8” (9.5mm)
2-9/32" (58mm)
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 18 © Copyright KrisTrack®
KT40 With KT5FASCIA Options
End Cap For KT40 Track (ceiling or wallmount application) & KT5FASCIA one side only
1-3/4” (44.45mm)
1-3/8” (35mm)
1-3/8” (35mm)
1-3/8” (35mm)
1-3/4” (44.45mm)
1-3/4” (44.45mm)
21/64” (8.4mm)
21/64” (8.4mm)
21/64" (8.4mm)
21/64” (8.4mm)
21/64” (8.4mm)
1/2” (12.7mm)
1/2” (12.7mm)
1/2" (12.7mm)
1/2” (12.7mm)
1/2” (12.7mm)
wood fascia by other
wood fascia by other
End cap, painted white for single fascia application. Fits KT40TRACK with one fascia only
1-59/64” (48.7mm)
3-1/64” (76.7mm)
ceiling mount onlyceiling or wall mount
ceiling or wall mount ceiling mount only
ceiling mount only
ceiling mount only
KT40ECWSINGLE
Wood fascia attached to full length of aluminum fascia
Wood fascia attached to full length of aluminum fascia
Depending on application, if the track is open at either end, then intrack stop must be fastened to either one or both ends of track
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 19© Copyright KrisTrack®
KT50 Ceiling Mount With KT5FASCIA Options
Wallmount Application
1/8” (2.8mm)
1/8” (2.8mm)
3/32” (2.5mm)
1/2” (12.7mm)
1/2” (12.7mm)
1/2” (12.7mm)
1/2” (12.7mm)
1-3/4” (44.4mm)
1-3/4” (44.4mm)
1-3/4” (44.4mm)
1-3/4” (44.4mm)
wood fascia
by other
1-3/8” (35mm)
1-3/8” (35mm)
1-3/8” (35mm)
1-3/8” (35mm)
2 fascias for room divider
for room divider application track is installed wall to wall, no open end of track showing
1 fascia for closet application
KT146 wallmount bracket
KT146 wallmount bracket
KT5FASCIAoptional
KT5FASCIA optional
Wood fascia
attached to full
length of aluminum
fascia
3”(76.2mm)
13/16”(20.5mm)
FULL SCALE
Depending on application, if the track is open at either end, then intrack stop must be fastened to either one or both ends of track
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 20 © Copyright KrisTrack®
KT47 Commercial Series: Wall Mount Sliding Door Track, Hardware & Fascia
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.4mm)
TRACK: Extruded aluminum, mill finish.
HANGER: Steel plated or cast carrier, 4 nylon wheels, ball bearing.
OPTIONS: KT47C Fascia, extruded aluminum, clear anodized (standard). KT23 floor channel extruded aluminum, bronze anodized with PVC insert.
FULL SCALE
One Track, Two Hanger Choices:KT38KIT for 1 door application: KT38HANGER (2 ea) hangers, KT102 (2 ea) floor mounted guide, KT113 (1 ea) adjustable bottom guide for wall mounted door, KT155 (1 ea) wrench, installation sheet plus all screws. Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT40KIT for 1 door application: KT40HANGER (2 ea) hangers, KT102 (2 ea) floor mounted guide, KT113 (1 ea) adjustable bottom guide for wall mounted door, KT155 (1 ea) wrench, installation sheet plus all screws. Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
KT102 Floor guide (2 ea)
KT155 wrench (1 ea)
KT38HANGER (2 ea)
KT40HANGER (2 ea)
Bracket is mountedo� center
2-13/32” (61mm)2-1/2” (63.5mm)
2-5/8”(67mm)
4”(102mm)
KT40HANGER
KT47TRACK
KT47C fascia(optional)
min = 2-1/8”
(54mm)
max = 2-3/8” (60mm)
Wall
9/16”(14mm)
3/8”(9.5mm)
1-3/8” (35mm) or1-3/4” (44.45mm)
door thickness
3/64” (1mm)o�set line
center line
5/8”(16mm)
KT113 adjustable bottom guide
finished floor line
1/8”(3mm)o�set
line
centerline
13/32”(10mm)
1-3/8” (35mm)door thickness
5/8”(16mm)
finished floor line
Wall
KT113adjustable bottom guide
FULL SCALE
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 21© Copyright KrisTrack®
KT47 Commercial Series: Wall Mount Sliding Door Track, Hardware & Fascia
KT116 Adjustable bottom guide (metal & plastic), for doors up to 1-3/4” (45mm) thick
Jamb Mounted Guide for Wall Mounted Sliding Doors
Outside Corner 90º Application
SINGLE SLIDING DOOR APPLICATION
3/16”(5mm)
KT116 guidejamb
1-3/8” (35mm) or1-3/4” (44.45mm)
door thickness
KT125 Intrack bumper door stop
KT40HANGER
KT47ECR end cap (right side) for KT47C fascia
KT47ECL end cap (lef t side) for KT47C fascia
KT47ECend cap (right and left side) use with KT47C fascia
TOP VIEW
CORNER PREP BY OTHER
FULL SCALE
Bottom Guiding Options
15/16” (24mm)
7/8”(22mm)
1/4”(6.4mm)
finishedfloor line KT23
Recessedfloor channel
KT127 roller guide
1-3/4” (44.45mm)
SS
SS
KT127SS1 ball bearing, single roller, stainless steel
KT127SS2 ball bearing, double roller, stainless steel
KT125 Intrack bumper stop, optional
KT125
FULL SCALE
4”(102mm)
2-1/4” (63.5mm)
1-3/4” (44.45mm)
finished floor line
15/16” (24mm)
7/8”(22mm)
1/4”(6mm)
KT23 doorbottomchannel
KT127 roller guide
FULL SCALE
Depending on application, if the track is open at either end, then intrack stop must be fastened to either one or both ends of track
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 22 © Copyright KrisTrack®
1-3/8” (34mm)
1-3/4” (44.45mm)or 1-3/8” (35mm)door thickness
KT60TRACKKT60HANGER
KT60FGUIDE
1-3/8”(35mm)
from top of track
to top of doormin = 2-1/8”
(54mm)max = 2-1/2”
(63.5mm)
19/32”(15mm)
15/32” (12mm)
3/8”(9.5mm)
FULL SCALE
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 3/8” (9.5mm) TRACK: Extruded aluminum, clear anodized. HANGER: Steel plated or cast carrier, 4 nylon wheels, ball bearing, QUICK RELEASE FEATURE.
OPTIONS: KT6FC fascia, extruded aluminum, clear anodized (standard) or custom colour, 4 lengths available: 84" (2133mm), 96" (2438mm), 120" (3048mm) & 160" (4064mm). KT23 floor channel extruded aluminum, bronze anodized with PVC insert. Also available KT20 & KT19 floor channels.
Floor guide (x2)
KT60HANGER Quick release hanger (x2)
Intrack stop (x2)
KIT INCLUDES
Wrench (x1)
KT60 Commercial Series: Single Track For Sliding Doors, Ceiling Mount
SINGLE TRACK WITH OPTIONAL FASCIA
3-1/32”(77mm)
43/64”(17mm)
KT6FC Fascia aluminum clear anodized. Lenghts available 84" (2133mm), 96" (2438mm), 120" (3048mm) & 160" (4064mm)
FULL SCALE
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 23© Copyright KrisTrack®
KT102 Floor guide (plastic)
2X SINGLE TRACK FOR BYPASS APPLICATION. FAS-CIAS BOTH SIDES FOR ROOM DIVIDER APPLICATION.
KT60KIT for 1 door application: KT60HANGER (2 ea) quick release hangers, KT60FGUIDE (1 ea) floor guide, KT60STOP (2 ea) intrack stops, (1 ea) wrench, installation sheet plus all screws. Max door weight: 132 lbs. (60 kg) = 2 hangers
Bottom Guiding Options
KT23 door bottom channel
KT127 roller guidefinished floor line
QUICK RELEASE feature allows for fast and safe installation and adjustment of door. Hanger bolt snaps into bracket and holds while you’re making adjustments
KT6FC Fascia aluminum clear anodized
KT114 Bottom guide (plastic), spring loaded, for KT19 floor channel
STEP 1hanger and bracket before assembly
STEP 2slide lever open STEP 3
slide bolt into slotSTEP 4release lever to lock in place
KT60 Commercial Series: Single Track For Sliding Doors, Ceiling Mount
For room divider application track is installed wall to wall, no open end of
track showing
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 24 © Copyright KrisTrack®
19/32”(15mm)
15/32” (12mm)
finished floor line
1-3/4” (44.45mm)or 1-3/8” (35mm)door thickness
from top of track to top
of doormin =
2-1/8” (54mm)max =
2-1/2” (63.5mm)KT61TRACKKT60HANGER
wall
KT60FGUIDE 3/8”(9.5mm)
1-59/64” (48.8mm)
FULL SCALE
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 3/8” (9.5mm) TRACK: Extruded aluminum, clear anodized. HANGER: Steel plated or cast carrier, 4 nylon wheels, ball bearing, QUICK RELEASE FEATURE.
OPTIONS: KT6FC Fascia, extruded aluminum, clear anodized (standard) or custom colour, 4 lengths available available: 84" (2133mm), 96" (2438mm), 120" (3048mm) & 160" (4064mm). KT23 floor channel extruded aluminum, bronze anodized with PVC insert. Also available KT20 & KT19 floor channels.
Floor guide (x2)
Intrack stop (x2)
KIT INCLUDES
Wrench (x1)
KT60HANGER Quick release hanger (x2)
KT61 Commercial Series: Single Track For Sliding Doors, Wall Mount
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 25© Copyright KrisTrack®
KT102 Floor guide (plastic)
OPTIONS
KT116 Adjustable bottom guide (metal & plastic) for wall mounted 1-3/4” (44.45mm) door
KT23 door bottom channel
KT127 roller guidefinished floor line
KT114 Bottom guide (plastic), spring loaded, for KT19 floor channel
KT60KIT for 1 door application: KT60HANGER (2 ea) quick release hangers, KT60FGUIDE (1 ea) floor guide, KT60STOP (2 ea) intrack stops, (1 ea) wrench, installation sheet plus all screws. Max door weight: 132 lbs. (60 kg) = 2 hangers
Quick release feature allows for fast and safe installation and adjustment of door. Hanger bolt snaps into bracket and holds while you’re making adjustments
STEP 1hanger and bracket before assembly
STEP 2slide lever open STEP 3
slide bolt into slotSTEP 4release lever to lock in place
KT116 Adjustable bottom guide (metal & plastic), for doors up to 1-3/4” (45mm) thick
Jamb Mounted Guide for Wall Mounted Sliding Doors
3/16”(5mm)
KT116 guidejamb
1-3/8” (35mm) or1-3/4” (44.45mm)
door thickness
FULL SCALE
KT61 Commercial Series: Single Track For Sliding Doors, Wall Mount
Fascia
KT6FC fascia opitonal
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 26 © Copyright KrisTrack®
KT6FC Fascia for KT60 Ceiling Mount Track
1-3/4” (44.45mm) or 1-3/8” (35mm) door thickness
1-3/4” (44.45mm) or 1-3/8” (35mm) door thickness
5/16” (8mm)
5/16” (8mm)
1-3/4” (44.45mm) or 1-3/8” (35mm) door thickness
5/16” (8mm)
5/16” (8mm)
5/16” (8mm)
1-3/4” (44.45mm) or 1-3/8” (35mm) door thickness
5/16” (8mm)
Wood fascia
attached to full
length of aluminum
fascia
Wood fascia
attached to full
length of aluminum
fascia
wood fascia by
other
wood fascia by
other
END CAP SELECTION
KT60ECSINGLE End cap, satin finish, for single fascia application. Fits KT60TRACK with fascia one side
1-15/16” (49.2mm)
3-7/64” (78.9mm)
KT60ECDOUBLE End cap, satin finish, for double fascia application. Fits KT60TRACK with one fascia each side
2-17/32” (64.3mm)
3-7/64” (78.9mm)
KT6FC Fascia for KT61 Wall Mount Track (end caps must be installed)
1-3/4” (44.45mm) or 1-3/8” (35mm) door
5/16” (8mm)
13/32” (10.5mm)
KT61ECSINGLE End cap, satin finish, for single fascia application. Fits KT61TRACK with fascia
1-3/4” (44.45mm) or 1-3/8” (35mm) door
wood fascia by other
5/16” (8mm) 13/32” (10.5mm) KT61ECSINGLEWOOD
End cap, satin finish, for single fascia application. Fits KT61TRACK with wood fascia over aluminum fascia
2-33/64” (64mm)
2-33/64” (64mm)
4-3/64” (102.6mm)
3-7/64” (79mm)
wallwall
Depending on application, if the track is open at either end, then intrack stop must be fastened to either one or both ends of track.
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 27© Copyright KrisTrack®
KT31 Commercial Series: Ceiling mount overhead track system, for supporting trailing cables, industrial curtains, tarpaulins, short hall nets, etc.
KT31HANGER
KT158S hook
KT159leather strap
1-9/32” (32mm)
1-1/4”(32mm)
1”(25mm)
7-5/8”(195mm)
KT31HANGER
KT159 leather strap
Curtain or tarpaulin bolted to hangers by others. Hanger center should not exceed 15” (375mm)
MAXIMUM DOOR WEIGHT: 33 lbs (15kg) = one hanger.
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
TRACK: Extruded aluminum, mill finish.HANGER: Steel carrier, plated, 2 nylon wheels, ball bearing.
FULL SCALE
KT40TRACK
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 28 © Copyright KrisTrack®
KT70 Commercial Series: Ceiling Mount Sliding Door Track & Hardware
2-7/16” (62mm)
1-31/32”(50mm)
from top of track to top of doormin = 3” (76mm)max = 3-1/4” (82.5mm)
KT70HANGERSSKT70TRACK
1-3/8” (35mm), 1-3/4” (44.45mm) or 2-1/4” (57mm)door thickness
KT128 intrack door stop
KT70HANGERSS stainless steel carrier with 4 nylon wheels
KT70RPLATE Mounting plate only for KT70HANGERSS (replacement part)
MAXIMUM DOOR WEIGHT: 650 lbs (300 kg) = two hangers
MIN & MAX DOOR THICKNESS: 1-3/8” (35mm), 1-3/4” (44.45mm) or 2-1/4” (57mm)
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.3mm)
TRACK: Extruded aluminum bronze or clear anodized.
HANGER: Stainless steel carrier, 4 nylon wheels, ball bearing
OPTIONS: KT23 extruded aluminum floor channel or door bottom channel, bronze anodized, with PVC channel insert.
FULL SCALE
No bottom guide included, with hanger, order separately
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 29© Copyright KrisTrack®
KT70 Commercial Series: Straight Sliding Door Track & Hardware, Ceiling Mount
3/16”(5mm)
1-3/8” (35mm) or1-3/4“ (44.45mm) or
door thickness
KT116 guidejamb
KT128 intrack bumper door stop
KT70HANGERSS
Bottom Guiding Options
KT116 Adjustable bottom guide (metal & plastic), for doors up to 1-3/4” (45mm) thick
FULL SCALE
15/16” (24mm)
7/8”(22mm)
1/4”(6.4mm)
finishedfloor line KT23
Recessedfloor channel
KT127 roller guide
1-3/4” (44.45mm)
SS
SS
Jamb Mounted Guide for Wall Mounted Sliding Doors
FULL SCALE
1-3/4” (44.45mm)
finished floor line
15/16” (24mm)
7/8”(22mm)
1/4”(6mm)
KT23 doorbottomchannel
KT127 roller guide
FULL SCALE KT127SS1 ball bearing, single roller, stainless steel
KT127SS2 ball bearing, double roller, stainless steel
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 30 © Copyright KrisTrack®
1-3/8” (35mm)
1-1/2”(38mm)
from top of track to top of door
min = 2-3/8” (60mm)
max = 2-5/8” (67mm)
KT41HANGERKT41TRACK
1-3/8” (35mm) or1-3/4“ (44.45mm) or
2-1/4” (57mm)door thickness
KT102floor guide
31/64” (12.3mm)
min 3/16” (8mm)max 5/8” (16mm)
1”(25.4mm)
finished floor line
KT41 Commercial Series: Ceiling Mount Sliding Door Track & Hardware
MAXIMUM DOOR WEIGHT: 385 lbs (175 kg) = 2 hangers (plated steel or stainless steel)
MIN & MAX DOOR THICKNESS:
Ceiling mount: 1-3/8” (35mm), 1-3/4” (44.45mm) or 2-1/4” (57mm). Wall mount: 1-3/8” (35mm) to 1-3/4” (44.45mm).
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6mm)
TRACK: Extruded aluminum, clear or bronze anodized.
HANGER: Steel carrier, plated, 4 nylon wheels, ball bearing or Stainless steel carrier, 4 nylon wheels, ball bearing.
OPTIONS: KT23 floor channel extruded aluminum, bronze anodized with PVC insert. KT142 wall mount bracket. KT147 face door mount bracket.
HARDWARE KITS: KT41KIT for single door application: KT41HANGER (2 ea) plated steel hangers, KT102 (2 ea) floor mounted guides, installation sheet plus all screws.KT41KITSS for single door application: KT82HANGERSS plated (2 ea) stainless steel hangers, KT102 (2 ea) floor mounted guides, installation sheet plus all screws.
FULL SCALE
KT41KIT INCLUDES KT41KITSS INCLUDES
KT102 floor mounted guide (2 ea)
KT102 floor mounted guide (2 ea)
KT41HANGER plated steel (2 ea) (2 ea)
KT82HANGERSS stainless steel
Max door weight: 385 lbs. (175 kg) = 2 hangers
Max door weight: 385 lbs. (175 kg) = 2 hangers
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 31© Copyright KrisTrack®
2-7/8”(73mm)
2-3/4”(70mm)
1-1/2”(38mm)
KT129 intrack door stop set
KT41 Commercial Series: Ceiling Mount Sliding Door Track & Hardware
KT142 wall mount bracket (required)
KT129 Intrack door
stop set
KT147 Hanger adapter bracket (optional)
Ceiling mount applicationWall mount application
KT41HANGER
3/16”(5mm)
1-3/8” (35mm) or1-3/4“ (44.45mm) or
door thickness
KT116 guidejamb
KT116 Adjustable bottom guide (metal & plastic), for doors up to 1-3/4” (45mm) thick
FULL SCALE
Bottom Guiding
OPTIONS
15/16” (24mm)
7/8”(22mm)
1/4”(6.4mm)
finishedfloor line KT23
Recessedfloor channel
KT127 roller guide
1-3/4” (44.45mm)
Jamb mounted guide for wall mounted sliding doors Intrack door stop
2-7/8”(74mm)
2”(50mm)
1-3/16”(30mm)
FULL SCALE
1-3/4” (44.45mm)
finished floor line
15/16” (24mm)
7/8”(22mm)
1/4”(6mm)
KT23 doorbottomchannel
KT127 roller guide
FULL SCALE
SS
SS
KT127SS1 ball bearing, single roller, stainless steel
KT127SS2 ball bearing, double roller, stainless steel
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 32 © Copyright KrisTrack®
KT102 Floor mounted
guide (3 ea)
KT102 Floor mounted
guide (3 ea)
KT106 convertible floor guide (1 ea)
KT106 convertible floor guide (1 ea)
KT51 Commercial Series: Ceiling Mount Bypass Door Track & HardwareMAXIMUM DOOR WEIGHT: 385 lbs (175 kg) = 2 hangers (plated steel or stainless steel)MIN & MAX DOOR THICKNESS: 1-3/8” (35mm) to 1-3/4” (44.45mm)
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.3mm)
TRACK: Extruded aluminum, clear or bronze anodized.
HANGER: Steel carrier, plated, 4 nylon wheels, ball bearing or Stainless steel carrier, 4 nylon wheels, ball bearing.
OPTIONS: KT23 floor channel extruded aluminum, bronze anodized with PVC insert,
HARDWARE KITS: KT51KIT for bypass door application: KT41HANGER plated steel (4 ea) hangers, KT102 (3 ea) floor mounted guides, KT106 (1 ea) convertible floor guide, installation sheet plus all screws.KT51KITSS for bypass door application: KT82HANGERSS stainless steel (4 ea) hangers, KT102 (3 ea) floor mounted guides, KT106 (1 ea) convertible floor guide, installation sheet plus all screws.
KT51KIT INCLUDES KT51KITSS INCLUDES
(4 ea)
KT82HANGERSS stainless steel
KT41HANGER plated steel (4 ea)
FULL SCALE
1-1/
2” (3
8mm
)
3-3/8” (85.7mm)
KT41TRACK(2 separate tracks used)
KT41HANGER
from top of trackto top of doormin = 2-3/8” (60mm)max =2-5/8” (67mm)
1-3/8” (35mm) or1-3/4” (44.45mm)
door thickness
1-3/8” (35mm) or1-3/4” (44.45mm)
door thickness
min 3/16” (8mm)max 5/8” (16mm)
31/64” (12.3mm)
1”(25.4mm)
KT102
KT102KT102
finished floor line
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 33© Copyright KrisTrack®
KT51 Commercial Series: Ceiling Mount Bypass Door Track & Hardware
KT147 hanger adapter bracket, face mounted on door
KT129 intrack door stop set
OPTIONS
1-3/4” (44.45mm)
1/4” (6.4mm)finished floor line
15/16” (24mm) KT23 door bottomchannel
KT127 roller guide
7/8”
(22m
m)
11/32” (9mm)
KT156
finished floor line
WALL
11/32” (9mm)
15/16” (24mm)
7/8”(22mm)
recessedfloor
channel
1/4”(6mm)
KT23
KT127roller guide
finishedfloor line
One Track, Two Hanger Choices:
KT51KIT for bypass door application: KT41HANGER plated steel (4 ea) hangers, KT102 (3 ea) floor mounted guides, KT106 (1 ea) convertible floor guide, installation sheet plus all screws.Commercial, max door weight: 385 lbs. (175 kg) = 2 hangers
KT51KITSS for bypass door application: KT82HANGERSS stainless steel (4 ea) hangers, KT102 (3 ea) floor mounted guides, KT106 (1 ea) convertible floor guide, installation sheet plus all screws.Commercial, max door weight: 385 lbs. (175 kg) = 2 hangers
2-7/8”(74mm)
2”(50mm)
1-3/16”(30mm)
KT114
KT19
clearance range:min=9/16” (14mm)max=1-1/8” (28.5mm)
34 © Copyright KrisTrack®ALL DRAWINGS NO SCALE, EXCEPT AS NOTED |
KT34 Residential Series: Bi-Pass Door Track & Hardware
KT34FLATH Hanger (2 ea)
KT34OFFSETH Hanger (offset), 2 ea
KT106 convertible floor guide (1 ea)
KT166 Flush pull, chrome, 3/4” (20mm), 2 ea
1-3/16”(30mm)
5-5/16” (135mm)
finished floor line5/16” (8mm) 9/16” (14mm)
21/64” (8.3mm)
KT106floor mountedconvertible guide
2-19/64” (58.5mm)
min = 1-5/8” (41mm)max = 2” (51mm)
KT34TRACK
3/4” (19mm) or1-3/8” (35mm)door thickness
3/4” (19mm) or1-3/8” (35mm)door thickness
KT34KIT INCLUDES
2-19/64” (58.5mm)
KT5FASCIA (optional)
2-15/16” (74.7mm)
3” (7
6.3m
m)
1-17/64”(32mm)
KT34TRACK
FULL SCALE
MAX DOOR WEIGHT: 60 lbs (27 kg) = 2 hangers MIN & MAX DOOR THICKNESS: 3/4” (19mm) to 1-3/8” (35mm)VERTICAL ADJUSTMENT: 3/8” (9.5mm)TRACK: Extruded aluminum FASCIA: Extruded aluminum, painted white (optional)HANGER: Steel carrier plated, one plastic wheel, ball bearing.
HARDWARE KIT: KT34KIT for 2 door application KT34FLATH (2 ea) hangers, KT34OFFSETH (2 ea) hangers, KT106 (1 ea) convertible floor guide, KT166 (2 ea) chrome finger pulls, installation sheet plus all screws.
35| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED© Copyright KrisTrack®
KT15 Commercial Series: Bifold Door Track & Hardware
hardware can accommodate3/4” (19mm) to
1-3/4” (44.45mm)door thickness
1-3/8” (35mm)door thickness shown
min =1/2” (12.7mm)max =7/8” (22mm)
from top of the trackto top of the doormin =1-13/16” (46mm)max =2-1/16” (52mm)KT40TRACK
KT15PIVOT
1-7/32”(31mm)
1-9/32” (32mm)
KT15HANGER
hinge by other
1-9/16” (40mm)
equal
equal
1-9/16” (40mm)
bottom of door to finished floor 5/8” (16mm)
1/4” (6mm) clearance edge of door to wall both sides
2 leafs= 1 door
KT15PIVOT Set,complete assembly
MAXIMUM DOOR WEIGHT: 120 lbs (55 kg) per bi-fold door (2 leafs)
MIN & MAX DOOR THICK-NESS: 3/4” (19mm) to 1-3/4” (44.45mm)
MAXIMUM CAPACITY: Max leaf width = 24” (609mm). Max door height = 96” (2834mm). For door leafs over 18” (457mm) wide and or over 33 lbs (15 kg) in weight, bottom guiding system must be used.
VERTICAL ADJUSTMENT: 1/4” (6mm)
TRACK: Extruded aluminum, mill finish.
HANGER / PIVOTS: Steel carrier, plated, 4 nylon wheels, ball bearing. Pivots are steel and nylon.
OPTIONS: KT20 extruded aluminum floor channel, with KT120 steel plate, nylon swivel guide
HARDWARE KITS: KT15KIT-2L for 2 leaf application KT15HANGER (1 ea), KT15PIVOT (1 ea) top and bottom pivots, KT189 (1 ea) knob, KT155 (1 ea) wrench, installation sheet plus all screws.
NOTE: For multiple leafs folding to one side use one KT15KIT-2L for the first 2 leafs and for each additional 2 leafs add one KT15HANGER & one KT189 bifold door knob.
1/2”(12mm)
7/8”(22mm)
1”(25.4mm)
5/8”(15mm)
KT120 swivelguide
KT20 floor channelsurfacemount
finished floor line
1-3/8” (35mm)
Optional bottom guiding
2 leafs= 1 door
KT15HANGERKT15PIVOT
pull handle
top and bottom top only
4 leafs in open position
4 leafs in closed position
*
*
3/4” (19mm) top of door to bottom of track
FULL SCALE
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 36 © Copyright KrisTrack®
MAXIMUM DOOR WEIGHT: 30 lbs (13.6 kg) per bifold door = 2 leafs
MIN & MAX DOOR THICKNESS: 3/4” (19mm) to 1-3/8” (35mm).
MAXIMUM CAPACITY: Max leaf width 24” (609mm). Max door height 80” (3032mm)
VERTICAL ADJUSTMENT: 3/8” (9.5mm).
TRACK: Extruded aluminum, painted white. KT193 (1 ea) top pivot bracket included in track up to and including 36” (914mm). Track lengths of 48” (1219mm) and greater include 2 brackets.
HANGER / PIVOTS: Steel and plastic.
HARDWARE KITS: KT10KIT for 1 door (2 leaf) application KT189 (1 ea) bifold door knob, KT190 (1 ea) bottom jamb bracket, KT191 (1 ea) door bottom pivot, KT192 (1 ea) top door pivot, KT193 Intrack top bracket (1 ea) included with top track, KT194 (1 ea) top roller guide, KT195 (1 ea) two leaf snugger, KT197 (1 ea) door aligner.
KT189 Bifold door knob, white plastic
KT195 2 leaf snugger (1 door)
KT10 Residential Series: Bifold Door Track & Hardware
KT197 Door aligner
min = 1” (25.4mm)max =1-3/8” (35mm)
35/64”(14mm)
1-1/32” (26mm)
min =1-1/16”(27mm)max =1-9/16”(40mm
KT10TRACK KT193KT192
KT190
hardware can accommodate3/4” (19mm) to1-3/8” (35mm)door thickness
1-3/8” (35mm)door thickness shown
finished floor line
KT193 Intrack top bracket (included with top track)
KT190 Bottom jamb bracket
KT191 Door bottom pivot
KT194 Top roller guide,
spring loaded
KT192 Top door pivot spring loaded
2 leafs= 1 door
2 leafs= 1 door
4 leafs= 2 doorsFULL SCALE
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 37© Copyright KrisTrack®
KT-Radius Series
RC
X
CP
ALArc Length (AL)
R = Radius (length from the C.P. to the edge of the circle)
C = chord lengthX = height of crownCP = center pointAL = arc length
RADIUS APPLICATION
Center point (CP)
Track only
E3 folding door header detail
DOORS
DOORS
Minimum Radius14’-7” / 175” (4445mm)to inside face of top track.(Warranty on hardware void if under minimum radius)
EXTERIOR INTERIOR
KT23D-RADIUS156 bronze anodized with PVC insert, 156” (3962mm)
Floor Channel for Radius Application
SS
FULL SCALE
CUSTOM ORDER ONLY, CALL FOR MANUFACTURING TIME.
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 38 © Copyright KrisTrack®
MAXIMUM DOOR WEIGHT: Weights listed next to each track
MIN & MAX DOOR THICKNESS: 1-3/8” (35mm) to 1-3/4” (44.45mm)
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes provided the weight of the door does not exceed the maximum weight listed .
VERTICAL ADJUSTMENT: Listed next to each track
TRACK & CHANNEL: Extruded aluminum, mill finish, clear or bronze anodized. Finishes listed below next to each track
HANGER: Steel carrier, plated, 4 nylon wheels, ball bearing or Stainless steel carrier, 4 nylon wheels, ball bearing (see below).
KT-Radius Series
KT70D-RADIUS156 bronze anodized, 156” (3962mm) KT41C-RADIUS156 aluminum clear anodized, 156” (3962mm)KT41D-RADIUS156 bronze anodized, 156” (3962mm)
Top Tracks Available for Radius Application
Weight:650 lbs (300 kg) = two hangers
Vertical adjustment:1/4” (6.4mm)
Weight:385 lbs (175 kg) = two hangers
Vertical adjustment:1/4” (6.4mm)
KT70HANGERSS stainless steel KT41HANGER
FULL SCALE
FULL SCALE
KT82HANGERSS stainless steel
PRODUCTS ON THIS PAGE CUSTOM ORDER ONLY, CALL FOR MANUFACTURING TIME.
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 39© Copyright KrisTrack®
Hardware & Accessories: Hangers
KT34FLATH Hanger for KT32 sliding door track (bipass). Max door weight: 60 lbs (27 kg) = 2 hangers
KT34TRACK
KT34TRACK
nylon wheel, ball bearingHanger for Sliding Doors (Bipass)
KT34OFFSETH Hanger (offset) for KT32 sliding door track (bipass). Max door weight: 60 lbs (27 kg) = 2 hangers
nylon wheel, ball bearingHanger for Sliding Doors (Bipass)
KT44OFFSETH for KT42 sliding door track (bipass). Max door weight: 60 lbs (27 kg) = 2 hangers
KT42TRACK
Hanger for Sliding Doors (Bipass)
KT42FLATH for KT42 sliding door track (bipass). Max door weight: 60 lbs (27 kg) = 2 hangers
KT42TRACK
Hanger for Sliding Doors (Bipass)
KT31HANGER for KT31 for overhead curtain system. Max door weight: 33 lbs (15 kg) = 1 hanger
Hanger for Sliding Nets, Curtains, etc.
KT40TRACK
21/32"(16.6mm)
35/64"(14mm)
5/8"(17mm)
7/8"(22mm)
2-3/8"(61mm)
2-3/8"(61mm)
2-3/16"(56mm)
1-1/32"(26mm)
2-5/8"(66mm)
2-5/8"(66mm)
1-3/8"(35mm)
1-3/8" (35mm)
160°
140°
2-31/64"(63mm)
2-31/64"(63mm)
1-49/64"(45mm)
1-49/64"(45mm)
9/32" (7mm)
DISCONTINUED
DISCONTINUED
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 40 © Copyright KrisTrack®
Hardware & Accessories: Hangers
KT15HANGER for KT15 bifold system. Max door weight: 120 lbs (55 kg) per bifold door (2 leafs)
Hanger for Bifold Doors
2 leafs= 1 door
KT40TRACK
KT35HANGER for KT40 & KT50 sliding door track. Max door weight: 100 lbs (45 kg) = 2 hangers
Hanger for Sliding Door (Single, Bipass, Triple)
KT40TRACK
KT50TRACK for bypass
Hanger for Sliding Door (Single, Bipass, Triple)
KT38HANGER For KT40 & KT50 sliding door track. Max door weight: 132 lbs (60 kg) = 2 hangers
KT40TRACK
KT50TRACK for bypass
KT40HANGER for KT40 & KT50 sliding door track. Max door weight: 220 lbs (100 kg) = 2 hangers
Hanger for Sliding Doors (Single, Bipass, Triple)
KT40TRACK
KT50TRACK for bypass
61/64"(24mm)
63/64"(25mm)
63/64"(25mm)
2-7/16"(62mm)
13/16" (20.5mm)
23/32" (18mm)
23/32" (18mm)
31/32" (25mm)
2-5/8" (66.5mm)
3-3/4" (95.6mm)
3-3/4" (95.6mm)
3-27/64" (87mm)
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 41© Copyright KrisTrack®
Hardware & Accessories: Hangers
Hanger for Sliding Doors (Single, Bipass, Triple)
KT41HANGER for KT41 & KT51 sliding door track. Max door weight: 385 lbs (175 kg) = 2 hangers
KT41TRACK
KT82HANGERSS for KT41 & KT51 sliding door track. Max door weight: 385 lbs (175 kg) = 2 hangers
SS SS
STAINLESS STEEL
KT41TRACK
KT41TRACK (X 2) For bypass
KT60TRACK (X 2) For bypass
Hanger for Sliding Doors
STAINLESS STEEL
KT70HANGERSS for KT70 sliding door track. Max door weight: 650 lbs (300 kg) = 2 hangers
SS SS
KT70TRACK
Hanger for Sliding Doors
KT60HANGER for KT60 & KT61 sliding door track. Max door weight: 132 lbs (60 kg) = 2 hangers
KT60TRACK KT61TRACK
Hanger for Sliding Doors
63/64" (25mm)
63/64" (25mm)
3-15/32" (88mm)
3-15/32" (88mm)
3-5/32" (80mm)
2-3/32" (53mm)
1-17/64" (32mm) 5-29/32" (150mm)
1-9/64" (29mm)
1-9/64" (29mm)
31/32" (25mm)
2" (50.5mm)
1-1/16" (27mm)
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 42 © Copyright KrisTrack®
Thresholds for Bottom Guiding
3” (76mm)
1-7/32”(30.6mm)
1-3/8” (35mm) 1-3/8” (35mm)
11/32” (9mm)
3” (76mm)
carpet or tile hardwood
3/8” (9.5mm)finished floor line
9/16”(14mm)
KT120 bottom guidemetal and plastic, mounting plate mortisedinto bottom of door
from top of trackto top of doormin = 2-1/8” (54mm)max = 2-3/8” (60mm)
KT114 Bottom guide (plastic), spring loaded
KT119 Bottom guide (plastic) for floor channel
KT120 Bottom guide (metal and plastic) for floor channel
Optional Bottom Guides
FULL SCALE
KT5FASCIA optional fascia, aluminum painted white.
Fascia is optional, application above shows fascia applied to one side of the bi-pass door track, typically used in a closet application.
KT300BGTC Bottom guided threshold, aluminum clear anodized
Application example below shows bottom guiding threshold installed on subfloor with tile, hardwood or carpet adjacent to one or both sides.
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 43© Copyright KrisTrack®
Thresholds for Bottom Guiding
KT114 Bottom guide (plastic), spring loaded
KT119 Bottom guide (plastic) for floor channel
KT120 Bottom guide (metal and plastic) for floor channel
Optional Bottom Guides
KT5FASCIA optional fascia, aluminum painted white.
Fascia is optional, application above shows fascia applied to both sides of the bi-pass door track, typically used as a room divider.
3” (76mm)
1-7/32”(30.6mm)
1-3/4” (44.45mm)
13/32” (10mm)
3” (76mm)
3/8” (9.5mm)
9/16”(14mm)
15/16”(24mm)
1-3/4” (44.45mm)
1-3/32” (27.5mm)1-3/32” (27.5mm)
finished floor line
KT120 bottom guidemetal and plastic, mounting plate mortisedinto bottom of door
from top of trackto top of doormin = 2-1/8” (54mm)max = 2-3/8” (60mm)
FULL SCALE
KT300BGTC Bottom guided threshold, aluminum clear anodized
Application example below shows bottom guiding threshold surface mounted on finished floor
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 44 © Copyright KrisTrack®
Thresholds for Bottom Guiding
3” (76mm)
1-7/32”(30.6mm)
1-3/8” (35mm) 1-3/8” (35mm)
11/32” (9mm)
4” (101.6mm) finished floor line
9/16”(14mm)
15/16”(24mm)
3/8” (9.5mm)
KT120 bottom guidemetal and plastic, mounting plate mortisedinto bottom of door
from top of trackto top of doormin = 2-1/8” (54mm)max = 2-3/8” (60mm)
FULL SCALE
Application example below shows bottom guiding threshold surface mounted on finished floor
KT114 Bottom guide (plastic), spring loaded
KT119 Bottom guide (plastic) for floor channel
KT120 Bottom guide (metal and plastic) for floor channel
Optional Bottom Guides
KT5FASCIA optional fascia, aluminum painted white.
Fascia is optional, application above shows fascia applied to one side of the bi-pass door track, typically used in a closet application.
KT400BGTC Bottom guided threshold, aluminum clear anodized
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 45© Copyright KrisTrack®
Thresholds for Bottom Guiding
3” (76mm)
1-7/32”(30.6mm)
1-3/4” (44.45mm)
13/32” (10mm)
9/16”(14mm)
15/16”(24mm)
1-3/4” (44.45mm)
1-3/32” (27.5mm)1-3/32” (27.5mm)
finished floor line4” (101.6mm)
1/4” (6.4mm)
KT120 bottom guidemetal and plastic, mounting plate mortisedinto bottom of door
from top of trackto top of doormin = 2-1/8” (54mm)max = 2-3/8” (60mm)
FULL SCALE
Application example below shows bottom guiding threshold surface mounted on finished floor
KT114 Bottom guide (plastic), spring loaded
KT119 Bottom guide (plastic) for floor channel
KT120 Bottom guide (metal and plastic) for floor channel
Optional Bottom Guides
KT400BGTC Bottom guided threshold, aluminum clear anodized
KT5FASCIA optional fascia, aluminum painted white.
Fascia is optional, application above shows fascia applied to both sides of the bi-pass door track, typically used as a room divider.
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 46 © Copyright KrisTrack®
15/16” (24mm)
7/8”(22mm)
1/4”(6.4mm)
finishedfloor line KT23
Recessedfloor channel
KT127 roller guide
1-3/4” (44.45mm)
Floor Channel Choices For Single Sliding Doors
15/16” (24mm)
7/8”(22mm)
1/4”(6.4mm)
finished floor line
KT23 Floor channelsurfacemount
KT127 roller guide
1-3/4” (44.45mm)
1-3/4” (44.45mm)
finished floor line
15/16” (24mm)
7/8”(22mm)
1/4”(6mm)
KT23 doorbottomchannel
KT127 roller guide
1” (25mm)
9/32” (7mm)
KT23D Floor channel, aluminum bronze anodized with pvc insert.
KT20A Floor channel, aluminum mill finishKT20D Bronze anodized
KT19C Floor channel aluminum clear anodized KT19D Bronze anodized 12 ft stock length only
KT23BLVE Replacement PVC insert (only)
15/16” (24mm)
7/8”(22mm)
1/2” (12mm)
5/8”(15mm)
SS
SS SS
SS
KT127SS1 ball bearing single roller, stainless steel
KT127SS2 ball bearing double roller, stainless steel
KT127SS Bottom guide, ball bearing roller (stainless steel) for surface mount floor channel
KT127SS Bottom guide, ball bearing roller (stainless steel) for door bottom channel
KT127SS Bottom guide, ball bearing roller (stainless steel) for recessed floor channel
FULL SCALEFULL SCALE
FULL SCALE FULL SCALEFULL SCALE
FULL SCALE
FULL SCALE
FULL SCALE
3/4" (19mm)
3/4" (19mm)
4-5/16” (110mm)
4-5/16” (110mm)
KT127SS1 ball bearing, single roller, stainless steel
KT127SS2 ball bearing, double roller, stainless steel
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 47© Copyright KrisTrack®
finished floor line
1-3/8” (35mm)
KT20floor
channel
KT119 floor guide
5/8”(15mm)
1/2”(12mm)
Floor Channel Choices For Single Sliding Doors
5/8”(15mm)
1-3/8” (35mm)
7/8”(22mm)
1” (25.4mm)
KT120 swivel guide
KT20door
bottomchannel
finished floor line
5/16”(8mm)
19/32”(15mm)
5/8”(16mm)
47/64”(18.6mm)
KT119floor guidefinished floor line
1-3/8” (35mm)
KT20door
bottomchannel
1-3/8” (35mm)
1” (25mm) finished floor line
9/32”(7mm)
KT114 floor guide
KT19 floor channel
1/2” (12mm)
7/8”(22mm)
5/16”(8mm)
1” (25.4mm)
5/8”(15mm)
1/4” (6.4mm)
KT120 swivel guide
KT20 floor channelrecessed
finished floor line
1-3/8” (35mm)
1/8” (3mm)
finished floor line
3/4”(19.2mm)
13/16”(20.6mm)
1-3/4” (44.45mm)
1/4”(5mm)
7/8”(22mm) 5/8”
(15mm)
1/4” (6.4mm)
1/2” (12mm)
KT119 Bottom guide (plastic) for floor channel
FULL SCALE
FULL SCALE FULL SCALE
FULL SCALE
FULL SCALE
FULL SCALE
clearance range:min=9/16” (14mm)max=1-1/8” (28.5mm)
mounting plate mortisedinto bottom of door
mounting plate surface mounted on bottom of door
KT120 Bottom guide (metal & plastic) for floor channel
KT114 Bottom guide (plastic), spring loaded, for KT19 floor channel
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 48 © Copyright KrisTrack®
15/16” (24mm)
7/8”(22mm)
recessedfloor channel
1/4”(6mm)
KT23
KT127roller guide
finishedfloor line
15/16” (24mm)
7/8”(22mm) floor mounted
channel
1/4”(6mm)
KT23
KT127 roller guide
finished floor line
1-3/4” (44.45mm)
finished floor line
15/16” (24mm)
7/8”(22mm)
1/4” (6mm)
KT23 door bottomchannel
KT127 roller guide
Floor Channel Choices For Bypass Sliding Doors
KT127SSBottom guide, ball bearing roller (stainless steel) for surface mount floor channel
KT127SSBottom guide, ball bearing roller (stainless steel) for door bottom channel
SS
KT127SSBottom guide, ball bearing roller (stainless steel) for recessed floor channel
SS
SSSS
3/4” (19mm)wheel diameter =5/8” (16mm)
4-5/16” (110mm)
4-5/16” (110mm)
wheel diameter =5/8” (16mm) 3/4” (19mm)
KT127SS1 ball bearing single roller, stainless steel
KT127SS2 ball bearing double roller, stainless steel
FULL SCALE
FULL SCALE
FULL SCALE
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 49© Copyright KrisTrack®
1-3/8” (35mm) 1-3/8” (35mm) 1-3/8” (35mm)
KT101floor guide
KT103KT114
finished floor line
KT156 KT156
15/32”(11.5mm)
11/32” (9mm) 11/32” (9mm)
Bottom Guiding For Multi-Sliding Doors
1-3/8” (35mm) 1-3/8” (35mm) 1-3/8” (35mm)11/32”(9mm)
11/32”(9mm)
KT19
KT114
finished floor line
KT156 KT156
11/32” (9mm)
KT19
KT114
finished floor line
KT156
KT101 Floor guide (plastic)
KT103 Bottom link guide (stainless steel) for 1-3/8” (35mm) doors
KT156 Collector (nylon) for Multi-Slide doors, two piece set
Shim spacer
KT114 bottom guide
KT19C Floor channel aluminum clear anodized KT19D Bronze anodized, 12 ft stock length only
1” (25mm)
9/32” (7mm)
clearance range:min=9/16” (14mm)max=1-1/8” (28.5mm)
clearance range:min=9/16” (14mm)max=1-1/8” (28.5mm)
clearance range:min=9/16” (14mm)max=1-1/8” (28.5mm)
FULL SCALE
FULL SCALE
FULL SCALE
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 50 © Copyright KrisTrack®
KT102 Floor guide (plastic)
KT106 Convertible floor guide (plastic) shown with 1-3/8” (35mm) door
KT106 Convertible floor mounted guide (plastic) shown with 1-3/4” (44.45mm) door
Bottom Guiding Options For Bypass Or Multi Slide Doors
1-3/8” (35mm) 1-3/8” (35mm)
1-3/16”(30mm)
5-5/16” (135mm) finished floor line
5/16” (8mm) 9/16” (14mm)
KT106floor mounted
guide
31/64” (12.3mm)
1”(25.4mm)
KT102
KT102
finished floor line
min 5/16” (8mm)max 5/8” (15mm)
1-3/8” (35mm) 1-3/8” (35mm)
1-3/16”(30mm)
5-5/16” (135mm) finished floor line
5/16” (8mm) 9/16” (14mm)
KT106floor
mountedguide
1-3/4” (44.45mm) 1-3/4” (44.45mm)
Assembly of convertible floor guide for 1-3/4” door
Assembly of convertible floor guide for 1-3/8” door
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 51© Copyright KrisTrack®
Hardware & Accessories: Guides
KT110 Door guide (plastic) for 1-3/8” (35mm) pocket door
KT107 Door guide (metal) for 1-3/8” (35mm) pocket door
KT111 Door guide (plastic) one piece each side for 1-3/4” (44.45mm) door thickness
KT116 Adjustable bottom guide (metal & plastic) for 1-3/8” (35mm) door
KT116 Adjustable bottom guide (metal & plastic) for 1-3/4” (44.45mm) door
KT113 Adjustable bottom guide for wall face mounted door for 1-3/8” or 1-3/4” door thickness
wall1-3/8”(35mm)
3/16” (5mm)
KT116guide1-3/4” (44.45mm) jamb
finished floor line
KT116guide1-3/8” (35mm) jamb
3/16” (5mm) finished floor line
1-3/8” (35mm)door thickness
KT107jamb mounted guide,metal
3-1/4” (82mm)
Bottom Guiding Options: Jamb Mounted Adjustable Guide for (Face Wall) Mounted Single Sliding or Double Biparting
Bottom Guiding Options: Jamb Mounted Guide for Pocket Doors
1-3/8” (35mm)door thickness
3-3/4” (96mm)
KT110plastic floor guide
1-3/4” (44.45mm)door thickness
1-3/16”(30mm)
KT111plastic floor guide
52 © Copyright KrisTrack®ALL DRAWINGS NO SCALE, EXCEPT AS NOTED
Hardware & Accessories: Guides
KT112 Floor guide, plastic KT101 Floor guide, plastic
KT60FGUIDE Floor guide, plastic
KTA2FGUIDESS Floor guide, SS metalKTA2FGUIDESSBLACK black
KTA7FGUIDE Floor guide, plastic
19/32” (15mm)
15/32” (12mm)
5/16” (8mm)
15/32” (11.5mm) 27/32” (21.5mm)
7/8” (22mm)
3/8” (9.5mm)
3/8” (9.5mm)
3/8” (9.5mm)
15/32” (12mm)
25/32” (20mm)
9/32” (7mm)
25/32” (20mm)
25/32” (20mm)
9/32” (7mm)
KT101KT103
KT114
KT156
FULL SCALE FULL SCALE
FULL SCALE
FULL SCALE FULL SCALE
11/64"(6mm)
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 53© Copyright KrisTrack®
Hardware & Accessories
KT125 Intrack bumper stop for KT47 Series, KT40 Series, KT31 Series, KT50 Series, KT40MS Series, KT53 Series
KT128 intrack door stop for KT70 track
Intrack Door Stops
Bumper Stops
KT122 Bumber stop, nail on, white
1-7/16”(37mm)
1-7/8”(47.6mm)
KT129 intrack door stop set for KT41 Series, KT51 Series
1-17/32”(39mm)
1-31/32”(50mm)
1-5/16”(33mm)
1-7/8”(48mm)
attach to top of door
intrack door stop
7/16” (11mm)
13/16” (21mm)
KT123 Bumber stop, attach with screw two choices bumper stops
KT124 bracket not included with hanger
KT125
TOPVIEW BACKVIEW
1-1/4”(32mm)
3/4”(20mm)
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 54 © Copyright KrisTrack®
Bifold
Hardware & Accessories
KT15PIVOT for KT15 Series bifold Miscellaneaus Bifold AccessoriesKT10PIVOT Set for KT10 Series bifold track
KT193 Intrack top bracket for pivot
KT192 Top door pivot
KT190 Bottom jamb bracket for pivot
KT191 Door bottom pivot
KT198 Bottom plate for multiple sets of bi-fold doors
KT194 Top roller guide
Brackets
2-7/8”(73mm)
2-3/4”(70mm)
1-1/2”(38mm)
2-7/8”(74mm)
2”(50mm)
1-3/16”(30mm)
KT142 wallmount bracket (metal) for KT41 series track
KT147 hanger adapter bracket (metal), face mounted on door, for KT41HANGER
1-1/2”(38mm)
1-1/8”(28.5mm)
1-3/4”(44.45mm)
KT151 hanger adapter bracket (metal), face-mounted on door, for KT35HANGER, KT38HANGER & KT40HANGER
1-11/16”(43.5mm)
1-1/2”(38mm)
1-1/8”(28.5mm)
KT146 Wall-mount bracket (metal) for KT40 Series track
Top pivot set
Bottom pivot set
KT197 Bifold door aligner
KT195 2 leaf snugger (1 door), inserts into KT10 track
KT115 spring guide, universal style for bi-fold door track
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 55© Copyright KrisTrack®
Pulls, & knobs
Pocket Door Frame Accessories
Hardware & Accessories
KT189 Bifold door knob (white plastic)
KT179CH Keyed lock for pocket door or bypass door, 1-3/8” or 1-3/4” door thickness
KT168 Flush pull, chrome 2-1/8” (54mm) hole diameter x 7/16” (12mm) depth
KT166 Flush pull, chrome, 3/4” (20mm) hole diameter x 5/16” (8mm) depth
KT143 Floor bracket for KD pocket door frame split jamb (pocket in a box)
KT177CH Privacy, bright chromeKT177DCH Privacy, dull chromeKT178CH Passage, bright chromeKT178DCH Passage, dull chrome
KT175SS Privacy, brushed stainless steelKT175PSS Privacy, polished stainless steelKT176SS Passage, brushed stainless steelKT176PSS Passage, polished stainless steel
KT144 bracket for KD pocket door frame header (pocket in a box)
KT174BRZ Flush pull, bronzeKT174CH polished chromeKT174DCH dull chrome
KT81 steel stif fener, 81”KT84 steel stif fener, 84” KT96 steel stif fener, 96”
55/64”(22mm)
7/16”(11mm)
Pocket Door Frame Stiffeners
Pocket Door Privacy or Passage Set Pocket Door Privacy or Passage Set2-9/32”(58mm)
3-1/4”(82.5mm)
1-3/4”(44.45mm)
2-7/8”(73mm)
Notching Dimensions
non handed for 1-3/8” (35mm) door thickness
2-9/16”(65mm)
2-9/16”(65mm)
For 1-3/8” door thickness
FRONT VIEW
SIDE VIEW
1-11/16”(43mm)
1/2” (12.7mm)
4-1/2”(114mm)
KT155 Wrench for KT35, KT38, KT40, KT43, KT50, KT52, KT53 & KT58
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 57© Copyright KrisTrack®
Specialty and Standard Pocket Door Wood Frame Selection
Standard Biparting Pocket Door Frame (RMBP) Standard Pocket Door Frame (HKD)Half Knock Down for Easy Transportation
Standard Pocket Door Frame (RM)
Specialty Pocket Door Frame RMPLY2 With Plywood One Side (custom order)
Specialty Pocket Door Frame RMPLY2 With Plywood Both Sides (custom order)
This custom frame has plywood on both sides for strength and allows towel bars, grab bars and cabinets to be installed on the pocket frame wall without compromising the integrity of the frame and wall.
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 58 © Copyright KrisTrack®
KT-Frame Rm Or HKD Series: Pocket Door Wood Frames Single & Double
The RM (Ready Made style) is fully assembled for quick and easy installation. The HKD is designed for ease of shipping and to minimize storage requirements. Chance of frame damage during transport is lessened due to compact packaging. Flat jamb, bottom rail and header are strapped to frame cage as shown below. Assembly takes approximately 10 to 20 minutes.
Frames built for 4-1/2” (114.3mm) wall thickness are designed to hold doors 1-3/8” (34.92mm) thick. Frames built for 6-1/2” (165.1mm) wall thickness are designed to hold doors up to 1-3/4” (44.45mm) thick.
Hardware Kit not Included, order separately.
NOTE: replace all track screws with # 8 x 1-1/2” (38mm) screws (included) after frame is installed and before drywall.
2’4” x 6’8” (711mm x 2032mm)2’6” x 6’8” (762mm x 2032mm)2’8” x 6’8” (812mm x 2032mm)
1’6” x 6’8” (457mm x 2032mm)2’0” x 6’8” (609 mm x 2032mm)2’2” x 6’8” (660mm x 2032mm)
2’10” x 6’8” (63mm x 2032mm)3’0” x 6’8” (914mm x 2032mm)3’0” x 7’0” (914mm x 2134mm)
Standard size frames available in both single and double, for 4-1/2” (114mm) and 6-1/2” (165.1mm) wall thickness:
Custom made frames are available and are non returnable, consult factory.
RM (READY MADE) Complete assembled frame
KT steel stif fener (full height on split jamb)
55/64”(22mm)
7/16”(11mm)
A
A
BB
C
C
This section of wood is cut out
after installation
ONE FRAME, 2 OPTIONSHKD (HALF KNOCK DOWN) Half assembled frame
ROUGH OPENING (RO) RO in width: 2 times the door size plus 2” (51mm) RO in height: 4-1/4” (108mm) more than door height Double pocket door frame: 4 times door width, + 2” (50.8mm)
MAX DOOR WEIGHTKT35PDKIT: 100 lbs (45 kg) = 2 hangers (KT35HANGER) KT38PDKIT: 132 lbs (60 kg) = 2 hangers (KT38HANGER) KT40PDKIT: 220 lbs (100 kg) commercial application = 2 hangers (KT40HANGER)
KT122 Bumber stop, nail on, attach to frame
C
(Hardware kit not included with frame, order separately)(Hardware kit not included with frame, order separately)
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 59© Copyright KrisTrack®
KT-Frame Rm Or HKD Series: Pocket Door Wood Frames Single & Double
Example shown for standard 3’ (915mm) x 6’-8” (2032mm) doorTypical pocket door frame construction
84” (
2134
mm
)
84” (2134mm)
35-15/16” (913mm)
36-1/8” (918mm)
73-1/2” (1867mm)
35-1/2” (902mm)3/8” (10mm)
One Track, Three Hanger Choices:
KT35PDKIT for 1 door application: (Hardware kit not included with frame, order separately) KT35HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors order two kits (KT35PDKIT).Residential, max door weight: 100 lbs. (45 kg) = 2 hangers
KT38PDKIT for 1 door application: (Hardware kit not included with frame, order separately) KT38HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors order two kits (KT38PDKIT). Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT40PDKIT for 1 door application: (Hardware kit not included with frame, order separately) KT40HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors order two kits (KT40PDKIT).Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
KT107 jamb mounted metal guide for 1-3/8” (35mm) door thickness
3-1/4” (82mm)
1-3/8” (35mm)
door thickness
KT40TRACK
3-1/2” (89mm)4-1/2” (114.3mm)
2-3/4”(71mm)
5/8” (17mm)
3/8” (9.5mm)1-1/4”
(31.7mm)
min = 2-1/8”
(54mm)max = 2-3/8”
(60mm)
1-9/32”(32mm)
1-7/32”(31mm)
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 60 © Copyright KrisTrack®
KT1000 (2 x 4 Wall) / KT1100 (2 x 6 Wall) Series: Pocket in a Box
NOTE: After installing pocket frames, replace all track screws with #8 x 11/2” (38mm) screws (included), before drywall.
BA
A
55/64”(22mm)
7/16”(11mm)
KT steel stif fener (full height on rear uprights and front split jamb)
A
C
KT122 Bumber stop, nail on, attach to RO stud
ROUGH OPENING (RO) The width is calculated by multiplying the door width by two and adding 1” (25.4mm) IE: 36” x 2 = 72”; 72” + 1” = 73” opening (914mm x 2 = 1828mm); (1828mm + 25.4mm) Rough opening in height is 4-1/4” (108mm) more than door height.
MIN & MAX DOOR THICKNESS 3/4” (19mm) to 1-3/8” (35mm)
VERTICAL ADJUSTMENT 3/8” (9.5mm)
DOOR WIDTH & HEIGHT Width: 24” (609mm) to 36” (914mm) / Height: Up to 80” (2032mm)
TRACK Extruded aluminum, keyhole punched
HANGER Steel construction zinc plated, 4 plastic wheels
HARDWARE KIT included with pocket in a box
KT40TRACK
B
Floor bracket for 2 x 4 wall. For 2 x 6 wall thickness wood bracket supplied
1 x 4 rear uprights (split studs) with 2 steel stif feners
1 x 4 front split jamb with 2 steelstif feners
FLAT JAMB, HEAD TRIM AND SPLIT JAMB TRIM NOT INCLUDED WITH THE KT1000 / KT1100 SERIES POCKET IN A BOX
KIT INCLUDES:
KT107 Door guide (1 ea)
Hangers (2 ea)
KT155 wrench (1 ea)
KT122 Bumber stop, nail on (1 ea)
KT143 Floor bracket for KD pocket door frame split jamb
(pocket in a box) (2 ea)
C
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 61© Copyright KrisTrack®
KT1000 (2 x 4 Wall) / KT1100 (2 x 6 Wall) Series: Pocket in a Box
One Track, Three Hanger Choices:
KT1035PDKIT: for 1 door application: (Hardware kit included with frame) KT35HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT143 floor brackets (2 ea), KT122 nail on bumper stop (1 ea), KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors two KT1035PDKIT required and two KT125 intrack door stops required.Residential, max door weight: 100 lbs. (45 kg) = 2 hangers
KT1038PDKIT for 1 door application: (Hardware kit included with frame) KT38HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT143 floor brackets (2 ea), KT122 nail on bumper stop (1 ea), KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors two KT1038PDKIT required and two KT125 intrack door stops required.Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT1040PDKIT for 1 door application: (Hardware kit included with frame) KT40HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT143 floor brackets (2 ea), KT122 nail on bumper stop (1 ea), KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors two KT1040PDKIT required and two KT125 intrack door stops required.Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
Frame Kit1 header with KT40TRACK2 split stud 1 x 42 split jamb 1 x 44 galvanized steel stif feners1 fixed header end bracket1 adjustable header end bracket
Hardware Kit2 hangers (4 wheels each)1 jamb mounted door guide1 nail on door bumper2 floor brackets (jamb spacers)1 wrench, screws & instructions
WHAT’S IN THE BOX: COMPONENT LIST
KT1035-1 2'-0" to 3'-0" x 6'-8" 100 lbs
KT1035-2 2'-0" to 3'-0" x 7'-0" 100 lbs
KT1038-1 2'-0" to 3'-0" x 6’-8" 132 lbs
KT1038-2 2'-0" to 3'-0" x 7’-0" 132 lbs
KT1040-1 2'-0" to 3'-0" x 6'-8" 220 lbs
KT1040-2 2'-0" to 3'-0" x 7'-0" 220 lbs
KT1135-1 2'-0" to 3'-0" x 6'-8" 100 lbs
KT1135-2 2'-0" to 3'-0" x 7'-0" 100 lbs
KT1138-1 2'-0" to 3'-0" x 6'-8" 132 lbs
KT1138-2 2'-0" to 3'-0" x 7'-0" 132 lbs
KT1140-1 2'-0" to 3'-0" x 6'-8" 220 lbs
KT1140-2 2'-0" to 3'-0" x 7'-0" 220 lbs
POCKET IN A BOX - KT40TRACKFor 4-9/16” wall (116mm), 1-3/8” (35mm) door thickness. Flat jamb, head trim & split jamb not included.
For 4-5/8” to 7-1/4” (117.5 to 184mm) wall, 1-3/4” (44.45mm) door thickness. Flat jamb, head trim & split jamb not included.
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 62 © Copyright KrisTrack®
KT1200 (2 x 4 Wall) / KT1300 (2 x 6 Wall) Series: Pocket in a Box
ROUGH OPENING (RO) The width is calculated by multiplying the door width by two and add 1” (25.4mm) IE: 36” x 2 = 72”; 72” + 1” = 73” opening (914mm x 2 = 1828mm); (1828mm + 25.4mm) Rough opening in height is 4-1/4” (108mm) more than door height
MIN & MAX DOOR THICKNESS 3/4” (19mm) to 1-3/8” (35mm)
VERTICAL ADJUSTMENT 3/8” (9.5mm) for KT1250 & KT1258
TRACK Extruded aluminum, keyhole punched
HANGER Steel construction zinc plated, 4 plastic wheels.
HARDWARE KIT Included in pocket in a box
A
C
D
55/64”(22mm)
7/16”(11mm)
KT steel stif fener (full height on rear uprights )
A
KT40TRACK
HEAD TRIM AND SPLIT JAMB TRIM INCLUDED WITH THE KT1200 / KT1300 SERIES POCKET IN A BOX. FLAT JAMB NOT INCLUDED
NOTE: After installing pocket frames, replace all track screws with #8 x 11/2” (38mm) screws (included), before drywall.
Floor bracket for 2 x 4 wall. For 2 x 6 wall thickness wood bracket supplied
1 x 4 split jamb with split jamb trim
split jamb trim
B
D
head trim
KT122 Bumber stop, nail on, attach to RO stud
C
KIT INCLUDES:
KT107 Door guide (1 ea)
Hangers (2 ea)
KT155 wrench (1 ea)
KT122 Bumber stop, nail on (1 ea)
KT143 Floor bracket for KD pocket door frame split jamb
(pocket in a box) (2 ea)
1 x 4 rear uprights (split studs) with 2 steel stif feners
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 63© Copyright KrisTrack®
KT1200 (2 x 4 Wall) / KT1300 (2 x 6 Wall) Series: Pocket in a Box
One Track, Three Hanger Choices:
KT1035PDKIT: for 1 door application: (Hardware kit included with frame) KT35HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT143 floor brackets (2 ea), KT122 nail on bumper stop (1 ea), KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors two KT1035PDKIT required and two KT125 intrack door stops required.Residential, max door weight: 100 lbs. (45 kg) = 2 hangers
KT1038PDKIT for 1 door application: (Hardware kit included with frame) KT38HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT143 floor brackets (2 ea), KT122 nail on bumper stop (1 ea), KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors two KT1038PDKIT required and two KT125 intrack door stops required.Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT1040PDKIT for 1 door application: (Hardware kit included with frame) KT40HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT143 floor brackets (2 ea), KT122 nail on bumper stop (1 ea), KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors two KT1040PDKIT required and two KT125 intrack door stops required.Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
KT1235-1 2'-0" to 3'-0" x 6'-8" 100 lbs
KT1235-2 2'-0" to 3'-0" x 7'-0" 100 lbs
KT1238-1 2'-0" to 3'-0" x 6'-8" 132 lbs
KT1238-2 2'-0" to 3'-0" x 7'-0" 132 lbs
KT1240-1 2'-0" to 3'-0" x 6'-8" 220 lbs
KT1240-2 2'-0" to 3'-0" x 7'-0" 220 lbs
KT1335-1 2'-0" to 3'-0" x 6'-8" 100 lbs
KT1335-2 2'-0" to 3'-0" x 7'-0" 100 lbs
KT1338-1 2'-0" to 3'-0" x 6'-8" 132 lbs
KT1338-2 2'-0" to 3'-0" x 7'-0" 132 lbs
KT1340-1 2'-0" to 3'-0" x 6'-8" 220 lbs
KT1340-2 2'-0" to 3'-0" x 7'-0" 220 lbs
POCKET IN A BOX - KT40TRACKFor 4-9/16” wall (116mm), 1-3/8” (35mm) door thickness. Includes head trim & split jamb.
For 4-5/8” to 7-1/4” (117.5 to 184mm) wall, 1-3/4” (44.45mm) door thickness. Includes split jamb.
Frame Kit1 header with KT40TRACK2 bevelled head trim2 split stud 1 x 42 split jamb 1 x 42 split jamb trim4 galvanized steel stif feners1 fixed header end bracket1 adjustable header end bracket
Hardware Kit2 hangers (4 wheels each)1 jamb mounted door guide1 nail on door bumper2 floor brackets (jamb spacers)1 wrench, screws & instructions
WHAT’S IN THE BOX: COMPONENT LIST
64 © Copyright KrisTrack®
Wallmount Rail System & Sliding Door Hardware For Wood Doors
KTA2 Open Rail (Round) Track System TM Series: for wood doors (rollers are top mounted)KTA2 Open Rail (Round) Track System FM Series: for wood doors (rollers are door face mounted)
A2 face mount hanger
KT174 flush pull
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 65© Copyright KrisTrack®
Handles for Sliding Wood Doors
KT502SSH Brushed stainless steel, fits 1-3/8" or 1-3/4" door thickness.KT502BLACKH Black
KT256SSH Brushed stainless steel, fits 1-3/8" or 1-3/4" door thickness.KT256BLACKH Black
1" (25mm)diameter
11-13/16" (300mm)
19-3/4" (502mm)
1" (25mm)diameter
5-25/32" (174mm)
10-5/64" (256mm)
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 66 © Copyright KrisTrack®
KTA2 Open Rail (Round) Track System & Hardware for Wood Doors
FACE MOUNT APPLICATION - MAX DOOR WEIGHT: 210 LBS (95 KG)
1-3/8”(35mm)
or1-3/4”
(44.45mm)door
thickness
15/32”(11.6mm)
from wall toface of door.
If more clearanceis required thenbracket spacers
are available
1-25/32”(45mm)
8-9/32”(210.5mm)
2-5/32”(55mm)
finished floor line
9/32”(7mm)
25/32”(20mm)
wallmountbracket
screw and plug
doorstop
roller
hangeranti-jump pin
roundrail
wall
HALF SCALE
19-11/16” (500mm)19-11/16” (500mm)
19-11/16” (500mm)
79-3/32” (2009mm)
19-11/16” (500mm)19-11/16” (500mm)
98-25/32” (2509mm)
19-11/16” (500mm)19-11/16” (500mm)
2 track lengths available
KTA2RAILCON Connector piece, connects 2 pieces of rail end to end. Order separately.
Each kit includes: 1 track 4 brackets (78” track) or 5 brackets (98” track) 2 rollers / hangers 1 guide2 door stopsNOTE: Individual replacement parts available
KT116 Optional adjustable bottom guide (metal & plastic). Order separately.
KT116 Guide1-3/4” (44.45mm)
door thickness
9/16” (15mm)KTSD15SPACER Optional spacer not included with kit, order separately
KTA2ROLLERFMRoller & hangerassembly, ball bearing
KTA2ROLLERFMRoller & hangerassembly, ball bearing
1”(25mm)
KTA2FGUIDESS Floor guide, metalKTA2FGUIDESSBLACK black
KTA2SS78FMKIT A2 Round rail, stainless steel, 78” with 4 brackets, 2 door stops, 2 hangers face mount, 1 guideKTA2BL78FMKIT A2 Round rail, black, 78” with 4 brackets, 2 door stops, 2 hangers face mount, 1 guideKTA2SS98FMKIT A2 Round rail, stainless steel, 98” with 5 brackets, 2 door stops, 2 hangers face mount, 1 guideKTA2BL98FMKIT A2 Round rail, black, 98” with 5 brackets, 2 door stops, 2 hangers face mount, 1 guideNOTE: For biparting double doors, 2 of the above kits are required plus one connector piece (KTA2RAILCON)KTA2RAILCONSS A2 Connector piece, stainless steel, for joining 2 rails end to endKTA2RAILCONSSBL A2 Connector piece, black, for joining 2 rails end to end
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 67© Copyright KrisTrack®
KTA2 Open Rail (Round) Track System & Hardware for Wood Doors
TOP MOUNT APPLICATION - MAX DOOR WEIGHT: 187 LBS (85 KG)
4-1/32”(102.5mm)
1-5/32”(29.3mm)
from wall toface of door.
9/32”(7mm)
25/32”(20mm)
finished floor line
1-3/8”(35mm)
or1-3/4”
(44.45mm)door
thickness
hanger
roundrail
wallmountbracket
screw andplug
roller
door stop
anti-jumppin
wall
HALF SCALE
KTA2SS78TMKIT A2 Round rail, stainless steel, 78” with 4 brackets, 2 door stops, 2 hangers top mount, 1 guideKTA2BL78TMKIT A2 Round rail, black, 78” with 4 brackets, 2 door stops, 2 hangers top mount, 1 guideKTA2SS98TMKIT A2 Round rail, stainless steel, 98” with 5 brackets, 2 door stops, 2 hangers top mount, 1 guideKTA2BL98TMKIT A2 Round rail, black, 98” with 5 brackets, 2 door stops, 2 hangers top mount, 1 guideNOTE: For biparting double doors, 2 of the above kits are required plus one connector piece (KTA2RAILCON)KTA2RAILCONSS A2 Connector piece, stainless steel, for joining 2 rails end to endKTA2RAILCONSSBL A2 Connector piece, black, for joining 2 rails end to end
KTA2FGUIDESS Floor guide, metalKTA2FGUIDESSBLACK black
19-11/16” (500mm)19-11/16” (500mm)
19-11/16” (500mm)
79-3/32” (2009mm)
19-11/16” (500mm)19-11/16” (500mm)
98-25/32” (2509mm)
19-11/16” (500mm)19-11/16” (500mm)
2 track lengths available
KTA2RAILCON Connector piece, connects 2 pieces of rail end to end. Order separately.
Each kit includes: 1 track 4 brackets (78” track) or 5 brackets (98” track) 2 rollers / hangers 1 guide2 door stopsNOTE: Individual replacement parts available
KT116 Optional adjustable bottom guide (metal & plastic). Order separately.
KT116 Guide1-3/4”
(44.45mm)door thickness
31/32”(24.5mm)
KTA2ROLLERTMRoller & hangerassembly, ball bearing
KTA2ROLLERTMRoller & hangerassembly, ball bearing
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 68 © Copyright KrisTrack®
3-15/16” (100mm)
17-11/16” (450mm)
78-3/4” (2000mm)
4-15/16” (125mm)
17-11/16” (450mm)
98-7/16” (2500mm)
2 track lengths available
17/32”(13.8mm)
1-3/4”(44.45mm)door thickness27/32”
(21.8mm)
KTA7 Open Rail (FLat) Track System & Hardware for Wood Doors
Featuring the BOM Black roller, stronger than nylon.
FACE MOUNT APPLICATION - MAX DOOR WEIGHT: 220 LBS (100 KG)
3-17/32”(90mm)
11-13/32”(290mm)
hanger
1-9/16”(40mm)
Anti-jumpdisc
1-3/8”(35mm)
doorthickness
door stoproller
flat rail
screw & plug
17/32”(13.3mm)
27/32”(21.3mm)
from wall toface of door.
If more clearance
is requiredbracket spacers
are available
finishedfloor line
wall
HALF SCALE
KTA7SS78FMKIT A7 Flat bar, stainless steel, 78” with 5 brackets, 2 hangers face mount, 1 guide, 2 door stopsKTA7BLACK78FMKIT A7 Flat bar, black, 78” with 5 brackets, 2 hangers face mount, 1 guide, 2 door stopsKTA7SS98FMKIT A7 Flat bar, stainless steel, 98” with 6 brackets, 2 hangers face mount, 1 guide, 2 door stopsKTA7BLACK98FMKIT A7 Flat bar, black, 98” with 6 brackets, 2 hangers face mount, 1 guide, 2 door stopsKTA7SS156FMKIT A7 Flat bar, stainless steel, 2 x 78” with connector piece = 156” length with hardware for 2 doorsKTA7BLACK156FMKITA7 Flat bar, black, 2 x 78” with connector piece = 156” length with hardware for 2 doorsKTA8S10MMSS Spacer, brushed stainless steel, 13/32” (10mm) thickKTA8S10MMBL Spacer, black electro plating over s.s., 13/32” (10mm) thick
Each kit includes:1 track 5 brackets (78” track) or 6 brackets (98” track)2 rollers / hangers1 guide2 door stopsNOTE: Individual replacement parts available
KTA7FGUIDE Floor guide, plastic
KT116 Optional adjustable bottom guide (metal & plastic). Order separately.
KT116 guide
KTA8S10MMOptional spacer not
included with kit, order separately
13/32” (10mm)
KTA7ROLLERFMRoller & hangerassembly, ball bearing
KTA7ROLLERFMRoller & hangerassembly, ball bearing
1-1/8”(28.5mm)
3” (80mm)
1-3/5”(40mm)
Connector piece, connects 2 pieces of flat bar end to end to extend length for biparting doors. Total = 156" (3962mm) length. See KTA7SS156FMKIT & KTA7BLACK156FMKIT below.
both flatbars come predrilled and ready for assembly
Kit supplied as shown above
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 69© Copyright KrisTrack®
3-15/16” (100mm)
17-11/16” (450mm)
78-3/4” (2000mm)
4-15/16” (125mm)
17-11/16” (450mm)
98-7/16” (2500mm)
2 track lengths available
1-3/4”(44.45mm)door thickness
1/2”(13mm)
Featuring the BOM Black roller, stronger than nylon.
TOP MOUNT APPLICATION - MAX DOOR WEIGHT: 220 LBS (100 KG)
KTA7 Open Rail Track (FLat) System & Hardware for Wood Doors
1-3/8”(35mm)
doorthickness
4-5/8”(117.5mm)
finished floor line
Anti-jumpdisc
11/16”(17.8mm)
from wall toface of door.
if more clearanceis required thenbracket spacers
are available
wall
screw & plugroller
hanger
doorstopflat rail
KTA7SS78TMKIT A7 Flat bar, stainless steel, 78” with 5 brackets, 2 hangers top mount, 1 guide, 2 door stopsKTA7BLACK78TMKIT A7 Flat bar, black, 78” with 5 brackets, 2 hangers top mount, 1 guide, 2 door stopsKTA7SS98TMKIT A7 Flat bar, stainless steel, 98” with 6 brackets, 2 hangers top mount, 1 guide, 2 door stopsKTA7BLACK98TMKIT A7 Flat bar, black, 98” with 6 brackets, 2 hangers top mount, 1 guide, 2 door stopsKTA7SS156TMKIT A7 Flat bar, stainless steel, 2 x 78” with connector piece = 156” length with hardware for 2 doorsKTA7BLACK156TMKIT A7 Flat bar, black, 2 x 78” with connector piece = 156” length with hardware for 2 doors
HALF SCALE
Each kit includes:1 track 5 brackets (78” track) or 6 brackets (98” track)2 rollers / hangers1 guide2 door stopsNOTE: Individual replacement parts available
KT116 Optional adjustable bottom guide (metal & plastic). Order separately.
KTA7FGUIDE Floor guide, plastic
KTA7ROLLERTMRoller & hangerassembly, ball bearing
KTA7ROLLERTMRoller & hangerassembly, ball bearing
KT116 guide
both flatbars come predrilled and ready for assembly
Kit supplied as shown above
1-1/8”(28.5mm)
3” (80mm)
1-3/5”(40mm)
Connector piece, connects 2 pieces of flat bar end to end to extend length for biparting doors. Total = 156" (3962mm) length. See KTA7SS156TMKIT & KTA7BLACK156TMKIT below.
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 70 © Copyright KrisTrack®
KTA8 All Stainless Steel (Satin or Black Finish)Open Rail Track System for Sliding Doors
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 71© Copyright KrisTrack®
A8 Open Rail Track System for Sliding Doors, All Stainless Steel
1/4” (6mm)
KT23 channel with PVC insert
finished floor line
1-3/4”(44.5mm)
1-1/32”(26mm)
2”(51mm) 1-1/32”
(26.6mm)
5-23/32”(145mm)
1-3/8”(35mm)
1-5/16” (33.6mm)
2-21/32”(67.5mm)
track spacers
����������������=door height +2-1/4” (57mm)
3/16”(5mm)
KT116 guide
finished floor line
1-3/4”(44.5mm) jamb
1-1/32”(26mm)
2”(51mm) 1-1/32”
(26.6mm)
5-23/32”(145mm)
1-3/8”(35mm)
1-5/16” (33.6mm)
2-21/32”(67.5mm)
track spacers
����������������=door height +
2-3/16”(55.5mm)
2-21/32”(67.5mm)
5-23/32”(145mm)
11-13/16”(300mm)
6-13/32”(155mm)
5/8”(16mm)
1-3/4”(44.5mm)
heightdimension =door height +2-1/4” (57mm)
1-3/8”(35mm)
track spacers
2-1/32”(51mm)
11/16”(17.6mm)
1/4”(6mm)
floor channel flush with finished floor
7/8”(22mm)
15/16” (24mm)
KT23 channel with PVC insert
ARCHITECTURAL SPECIFICATIONS
Max door weight: 650 lbs (300kg) = 2 carriers Max door thickness: 2-1/4” (57.15mm) Max door width: 144” (12 ft / 3658mm)Max door height: 144” (12 ft / 3658mm)
TOP MOUNT SIDE VIEW FACE MOUNT SIDE VIEW
OPTION 1Channel installed into bottom of grooved door, KT127 roller guide mounted to floor
OPTION 2Guide fastened to jamb
OPTION 3Roller guide mounted to bottom of door
KTA8 Door stop
Open rail: flat bar stainless steel 304 (brushed or black) Carriers: all stainless steel (face mount or top mount)Door stop: all stainless steel with rubber bumpers Floor channel: aluminum with pvc channel insert, bronze anodizedGuides: jamb mounted or floor mounted or bottom of door mounted
PANEL SIZINGWeight dictates door dimensions, however for panels over 10 ft. (3000mm) wide, use three carriers for additional lateral support. If using three, adjust the middle carrier high to avoid it bearing any load.
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 72 © Copyright KrisTrack®
KTA8 Carrier Face Mount, Stainless Steel 304
HALF SCALE
NO SCALE
KTA8FACEFCSS Carrier, face mounted on door, brushed stainless steel.KTA8FACEFCBL Carrier, face mounted on door, black electro plating over stainless steel.
All carriers supplied with mounting fasteners.
TOP VIEW
FULL SCALE
12-1/8" (308mm)
11-3/4" (298.5mm)
2-1/4" (57mm)
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 73© Copyright KrisTrack®
KTA8 Carrier Face Mount, Stainless Steel 304
HALF SCALE
12-1/8" (308mm)
1-3/4" (44.45mm)
1-3/4" (44.45mm)
2-61/64" (75mm) radius
2-61/64" (75mm) radius
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 74 © Copyright KrisTrack®
A8 Carrier Top Mount, Stainless Steel 304
HALF SCALE HALF SCALE
NO SCALE
KTA8TOPFCSS Carrier, top mounted on door, brushed stainless steel.
KTA8TOPFCBL Carrier, top mounted on door, black electro plating over stainless steel.
All carriers supplied with mounting fasteners.
FULL SCALE
2-61/64" (75mm) radius
2-61/64" (75mm) radius
6-1/64" (153mm)
6-1/64" (153mm)
6" (152mm)
6" (152mm)1-1/2” (38mm)
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 75© Copyright KrisTrack®
KTA8 Door Stop (Attaches to KTA8 open rail), Stainless Steel 304 with Rubber Bumpers
TOP VIEW
HALF SCALE
KTA8DSTOPSS Door stop, brushed stainless steel.KTA8DSTOPBL Door stop, black electro plating over stainless steel.
FULL SCALE
FULL SCALE
3-35/64" (90mm)
2-1/8" (54mm)
2-59/64" (74mm)
1-47/64" (44mm)
3/4" (19mm)
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 76 © Copyright KrisTrack®
KTA8 Open Rail, Flat Bar Track, Stainless Steel 304
KTA8 Spacers, Stainless Steel
FULL SCALE
KTA8SPACERSS Spacer, brushed stainless steel.KTA8SPACERBL Spacer, black electro plating over stainless steel.
NOTE: Spacers not included with KTA8 open rail, order separately.
NOTE: All spacers supplied with mounting fasteners
NOTE: KTA8 open rail sold as complete system only: track, carriers, stops & guides
4” (102mm)
1-3/8” (35mm)
1-5/16” (33.5mm)
7/16” (11mm)
13/32” (10mm)
2” (50.8mm)
2” (50.8mm)
2” (50.8mm)
3/16” (5mm)
3/16” (5mm)
3/16” (5mm)
1-11/32” (34mm)
KTA8 Top railBrushed stainless steel Available with mounting holes (standard) or without mounting holes (special order)
KTA8TOPRAIL84SSBrushed stainless steel
KTA8TOPRAIL108SSBrushed stainless steel
KTA8TOPRAIL118BLBlack electro plate over stainless steel
KTA8TOPRAIL132SSBrushed stainless steel
KTA8TOPRAIL156SSBrushed stainless steel
KTA8TOPRAIL180SSBrushed stainless steel
84” (2133mm)
108” (2743mm)
118” (2997mm)
132” (3352mm)
156” (3962mm)
180” (4572mm)
All 16” (406mm) on center
All 16” (406mm) on center
15”(381mm)
15”(381mm)
11”(279mm)
16”(406mm)
16”(406mm)
16”(406mm)
16”(406mm)
16”(406mm)
16”(406mm)
16”(406mm)
10”(254mm)
10”(254mm)
3” (76mm)both ends
KTA8TOPRAIL84BLBlack electro plate over stainless steel84” (2133mm)
15”(381mm)
16”(406mm)
3” (76mm)both ends
3” (76mm)both ends
3” (76mm)both ends
3” (76mm)both ends
All 16” (406mm) on center
All 16” (406mm) on center
All 16” (406mm) on center
All 16” (406mm) on center All 16” (406mm) on center
3” (76mm) both ends
19” (482mm)
Black electro plate over stainless steelOnly available with mounting holes
KTA8S10MMSS Spacer, brushed stainless steel, 10mm thick.KTA8S10MMBL Spacer, black electro plating over stainless steel,10mm thick.Use with KTA8SPACERSS or KTA8SPACERBL
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 77© Copyright KrisTrack®
SS
SS
KTA8 Floor Channel & Floor Guide
KT127roller guide mounted to bottom of doorfloor channel installed flush with finished floor
Channel installed into bottom of grooved door, KT127 roller guide mounted to floor
KT174 flush pull mortise = 1-1/4” x 3-7/16”
FRONT VIEW SIDE VIEW
3/4” (19mm)wheel diameter =5/8” (16mm)
4-5/16” (110mm) 4-5/16” (110mm)
wheel diameter =5/8” (16mm) 3/4” (19mm)
KT127SS2Bottom guide, ball bearing single roller (stainless steel) for floor channel or bottom door channel
KT127SS1Bottom guide, ball bearing single roller (stainless steel) for floor channel or bottom door channel
SS
SS
KT174BRZ Flush pull, bronzeKT174CH polished chromeKT174DCH dull chrome
KT116 Adjustable bottom guide (metal & plastic), for doors up to 1-3/4” (45mm) thick
KT23DV Floor channel bronze anodized with PVC insert. Lenghts available: 36”, 72”, 111”, 147”, 183”, 222”, 294” (914mm, 1829mm, 2819mm, 3734mm, 4648mm, 5639mm, 7468mm)
KT116 guide1-3/8” (35mm)
3/16” (5mm)
FULL SCALEFULL SCALE
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 78 © Copyright KrisTrack®
KTA2, KTA7 & KTA8 Accessories
KT116 Adjustable bottom guide (metal & plastic), for doors up to 1-3/4” (45mm) thick
3/16” (5mm)
KT116 guidejamb1-3/8” (35mm) or1-3/4” (44.45mm)
door thickness
FULL SCALE
Optional Floor Channel & Floor Guide
Bottom Guides
SS
3/4” (19mm)wheel diameter =5/8” (16mm)
4-5/16” (110mm) 4-5/16” (110mm)
wheel diameter =5/8” (16mm) 3/4” (19mm)
KT127SS2Bottom guide, ball bearing single roller (stainless steel) for floor channel or bottom door channel
KT127SS1Bottom guide, ball bearing single roller (stainless steel) for floor channel or bottom door channel
SS
KT127roller guide mounted to bottom of door
floor channel installed flush with finished floor
KT23DV Floor channel bronze anodized with PVC insert. Lenghts available: 36”, 72”, 111”, 147”, 183”, 222”, 294” (914mm, 1829mm, 2819mm, 3734mm, 4648mm, 5639mm, 7468mm)
KT112 Floor guide, plastic
5/16” (8mm)
7/8” (22mm)
3/8” (9.5mm)
FULL SCALE
KTA2FGUIDESS Floor guide, SS metalKTA2FGUIDESSBLACK black
3/8” (9.5mm)
25/32” (20mm)
9/32” (7mm)
FULL SCALE
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 79© Copyright KrisTrack®
KTA2, KTA7 & KTA8 Accessories
KTA2RAILCONSS Connector piece, brushed stainless steel, connects 2 pieces of track end to end. KTA2RAILCONSSBL black finish over stainless steel.Order separately.
NOTE: For biparting double doors, 2 kits required plus one connector piece (KTA2RAILCON)
KTA2 Connector
KT174 flush pull mortise = 1-1/4” x 3-7/16”KT174BRZ Flush pull, bronzeKT174CH polished chromeKT174DCH dull chrome
Flush Pulls
KTSD30SPACER Spacer, brushed stainless steelUse with KTA2 systems
NOTE: Spacers not included with any KTA2, KTA7 or KTA8 kits, order separately.
2-9/32” (58mm)diameter
KTA8S10MMSS Spacer, brushed stainless steelKTA8S10MMBL Black electro plating over stainless steelUse with KTA7 or KTA8 systems
1-3/16” (33.5mm)diameter
13/32” (10mm) thickness 1-3/16” (30mm) thickness
KTSD15SPACER Spacer, brushed stainless steelUse with KTA2 systems
2-9/32” (58mm)diameter
9/16” (15mm) thickness
Spacers
FRONT VIEW SIDE VIEW1-11/16” (43mm) 1/2”
(12.7mm)
4-1/2”(114mm)
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 80 © Copyright KrisTrack®
TOP 10 COOL REASONS TO GO WITH MONDOOR
• Weightless• Very user friendly• Minimal wear• Smooth and noiseless• Space saving• Hygienic and aesthetic• No doorstep• Withstands rough handling• Minimal chance of malfunction• Lifetime warranty on magnetic action
If the standard designs do not work for you, then Mondoor® has a unique patented profile system that offers easy and affordable solutions for your custom size needs.
You have the option of choosing either a front-of-wall system (wall or ceiling mounted) or an in-wall system (pocket door frame).
Mondoor® brings you the door of the future. It doesn’t revolve or even slide; a Mondoor floats. The floating door is suspended in magnetic fields, giving it a weightless feel and making it very smooth to handle and comfortable to use. No wonder everybody is going for the Mondoor®.
By HEALTH CARE, COMMERCIAL & RESIDENTIAL.
FLOATING POCKET DOOR - FRAME SYSTEMSIn wall system (pocket door frame) or front of wall system (face-mount)
KT172-80 For doors up to 80 lbs. (36 kg)
3-3/32” (79mm)
5/8” (16mm)15/16”(24mm)
spring loaded plunger
Bumper Stop / Spring Loaded Auto Return for Mondoor Pocket Frame
Bore hole size 11/16” ( ) x 3-1/4” (83mm) Location of hole is 3” (76mm) up from center of door
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 81© Copyright KrisTrack®
Positive locking lever optional if requiredSatin finish on aluminum or brushed stainless steel
Mondoor header detail. The Mondoor® patented magnetic system ison top of the door.
For all of its floating door systems, Mondoor® of fers a lifetime warranty on the magnetic action, which makes the Mondoor® the perfect solution for high traffic areas.
Health care application
Optional Door Pull
Dull chrome, dark bronze powder coat and bright chrome
LOCKS OR PULLS NOT INCLUDED, ORDER SEPARATELY.
Pocket Door Privacy or Passage Set
Door edge finger pull included
Brushed stainless steel
By HEALTH CARE, COMMERCIAL & RESIDENTIAL.
FLOATING POCKET DOOR - FRAME SYSTEMSIn wall system (pocket door frame) or front of wall system (face-mount)
ALL DRAWINGS NO SCALE, EXCEPT AS NOTED | 82 © Copyright KrisTrack®
Door system with top lite panel
Facilitates moving patients from room to room through door ways without compromising or affecting the functionality of the sliding pocket door.
Ceiling Mounted Track & Lift
Mondoor metal pocket frame (satin coated steel 16 gauge) installed into wall. Pocket frame to be boarded vertically.
Experience the comfort of weightlessWith its revolutionary floating door system, Mondoor® has done away with the disadvantages of the traditional revolving and sliding doors. Aside from flexibility and reliability, the floating door and metal frame (satin coated steel 16 gauge) excel in both quality and hygiene. Plus, they save space. And since a closed magnetic circuit is used, there is no risk of affecting any equipment nearby.
HEALTH CARE, COMMERCIAL & RESIDENTIAL.By
FLOATING POCKET DOOR - FRAME SYSTEMSIn wall system (pocket door frame) or front of wall system (face-mount)
| ALL DRAWINGS NO SCALE, EXCEPT AS NOTED 83© Copyright KrisTrack®
STANDARD SIZES (20 STOCK SIZES AVAILABLE, REFER TO PRICE LIST): WIDTHS: 28” (711mm), 30” (762mm), 32” (813mm), 34” (864mm) & 36” (914mm). HEIGHTS: 80” (2032mm), 84” (2134mm), 90” (2286mm) & 96” (2438mm). In wall system (pocket door frames) can be custom built to suit max door size of 54” (1371mm) x 116” (2946mm). Front of wall system (wall or ceiling mount) are custom built to suit max door size of 72” (1829mm) x 120” (3048mm)Maximum door weight = 190 lbs (86 kg). Sizes not listed above & lift system are custom made, call for quote.
A B
A B
Cross sectionA - A
Cross sectionB - B
32” (813mm)
35” (889mm)
83.4
” (2
118m
m) f
ram
e he
ight
5” (127mm)
23”(584mm)
25-1/2”(648mm)
27”(686mm)
80”
(203
2mm
) fra
me
heig
ht
81-3
/4”
(207
6.45
mm
) cle
ar o
peni
ng
Door in pocket with handle
5-23
/32”
(145
mm
)
3-19
/32”
(91m
m)
2-13
/64”
(56m
m)
4” (101mm)
31” (787mm)clear opening
36” (914mm)door width
74-1/8” (1883mm)frame OSM width
Door in pocket with flush pull
5-23
/32”
(145
mm
)
3-19
/32”
(91m
m)
2-13
/64”
(56m
m)
36” (914mm)door width
74-1/8” (1883mm)frame OSM width
35” (889mm)clear opening
Dimensions below for a typical frame for a 36” (914mm) x 80” door (2032mm)
R.O. = 2 x door width plus 3” (76mm).Door height plus 5” (127mm) = R.O. height. Based on 3/4” (19mm) finished flooring thickness.
Typical gapping under door to finished floor = 11/16” (17mm). Pocket frame is installed on top of finished floor. If finished floor is not installed before pocket frame installation, then frame will be shimmed up for floor thickness.
Plywood can be applied to one side or both sides of pocket frame cage. Call for plywood pricing. Frame designed for 1/2” (12.7mm) or 5/8” (15.8mm) drywall.
Mondoor® Floating Pocket Door - Frame Systems can only be installed by certified Mondoor® Installers.
Mondoor® Pocket Frame includes: Magnets for top of door and all trim is included for both sides of frame. Trim available in 3 standard powder coated finishes: white, slate grey & bronze (RAL).Custom colors or wood grain also available, call for quote. Frame available fully assembled or KD.KD frame has to be riveted together on the job site. Rivets are supplied.
PLEASE NOTE: door panel for Mondoor® pocket frame by other, not included.
Closed Door
5-11
/16”
(145
mm
)
3-5/
8” (9
2mm
)fr
ame
dept
h2-
11/6
4” (5
5mm
)
1-3/8” (35mm) or 1-3/4” (44.45mm)
door thickness35”
clear opening36”
door width
74-1/8” (1883mm)frame OSM witdh
2-3/4” (70mm)
1-3/
4” (4
5mm
)
3-1/4” (82.5mm)
2-1/
8” (5
4.5m
m)
MONDOOR FRONT OF WALL SYSTEM, CEILING OR WALL MOUNT
HEALTH CARE, COMMERCIAL & RESIDENTIAL.By
FLOATING POCKET DOOR - FRAME SYSTEMSIn wall system (pocket door frame) or front of wall system (face-mount)
NEWPRODUCTS
2018
Head Office & Manufacturing Centre, Vancouver, CanadaUnit 100 - 4825 275th St, Langley, B.C. V4W 0C7 CanadaPhone: (604) 451-1080 • Fax: (604) 451-1140 • www.KrisTrack.com • [email protected] Vancouver, B.C., please use our toll free numbers: Phone: 1-888-520-9009 Fax: 1-800-567-2887
Branch Office & Manufacturing Centre, Toronto, CanadaPhone head office toll free 1-888-520-9009 for branch address
Branch Office & Distribution Centre, Los Angeles, California, USAPhone head office toll free 1-888-520-9009 for branch address
Track and Hardware Specialists