tps62730 –step down converter for low-power rf …...• tps62730 is a voltage regulator perfect...
TRANSCRIPT
TPS62730–step down converter
TI Information – Selective Disclosure 1
TPS62730–step down converter
for low-power RF applications.
Briefing presentation
Presented by: Thomas Hoffman
Why was the part developed?
TI Information – Selective Disclosure2
Market Situation
• Mobility is an unbreakable trend mostly driven by
convenience and hunger for information
• Mobile devices allow for simple patient monitoring
while increasing life quality
• Smart Metering enables flexible control of power
needs through simple consumer interaction
• Building technologies support a flexible adjustment
to life style and yet support reduce overall power
BT Accessories
Metering
Building
Technologies
TI Information – Selective Disclosure
to life style and yet support reduce overall power
consumption
• Most of the latest DC-DC Converters reach
efficiencies greater 90% and so other approaches
are needed to reduce power consumption or extend
application run time.
• Some applications are challenged to guarantee an
operating life through one battery of up to 10 years
Sports gear
Portable Medical
Smart Phone
Why was the part developed?
• Applications using low-power RF devices that run on a battery have
been burning more energy than necessary.
• One approach to solve the problem:
– One approach to avoid additional energy loss is to connect the battery to the
load without any additional voltage regulation, which adds cost and space.
– The load itself is still burning more energy than needed while operating
directly from the battery. This is because the minimum supply voltage of
these devices is already close to the level of a discharged battery – every
TI Information – Selective Disclosure 4
these devices is already close to the level of a discharged battery – every
input voltage about that level is a waste.
– Not a solution to the problem.
Need for a solution!
Real solution, with real power savings.
TI Information – Selective Disclosure5
New supply concept for wireless Apps
Historical Power Concept:System powered directly from battery
Wanted- keep ultra low Iq in sleep mode
- Reduce current consumption during Transmission
- Increase battery life time
Low powerController(MSP430)
Low Power
Buck Conversionto ~ 2V
Bypass Mode
TI Information – Selective Disclosure
Low powerController(MSP430)
Low Power Wireless(CCXXXX)
Sensors
New Power Concept:
• Sleep mode:
system directly powered from battery
• RF operation:
DC/DC conversion reduces power consumption
Low Power Wireless(CCXXXX)
Sensors
TPS62730 (TPS_Radio)100mA Low Noise DC/DC solution with Bypass Mode
• Selectable or Automatic Transition from DC/DC
to bypass mode
• Up to 95% Efficiency, 25uA (typ.) Quiescent
Current and 30nA (typ.) Shutdown Current
• Excellent low Output Voltage Ripple
• DCS-Control™ topology
• Extends application run time between 20% to 30%
• Support reduction of total power consumption from
battery
• Makes this device ideal for RF applications
• Enables seamless transition into Power Save Mode
and excellent AC line and transient load regulation
• Small external components and small IC package
allow for solution size of <12mm2
TI Information – Selective Disclosure
• Package: 1mm x 1.5mm QFN and 0402 caps,
0603 inductor
• BLE (Bluetooth Low Energy)
• MSP430 and alike controller supply
• HVAC (Heating, Ventilating, and Air
Conditioning)
• RF4CE (ZigBee)
• Metering
• Smoke Detectors
allow for solution size of <12mm2
TPS62730
VIN
ON/BYP STAT
GND VOUT
SW
V
2.1VOUTV
1.9V - 3.9VIN
C2.2
IN
µF
C2.2
OUT
µF
L 2.2 Hµ
ONBYP
TPS62730EVM-726
New! 100mA Low Noise DC/DC solution
with Bypass Mode: TPS62730 (TPS_Radio)
• Extends application run time between 20% to 30%
• Support reduction of total power consumption from battery
• Makes this device ideal for RF applications
• Enables seamless transition into Power Save Mode and
excellent AC line and transient load regulation
• Small external components and small IC package allow for
solution size of <12mm2
TI Information – Selective Disclosure
TPS62730EVM-726
• Selectable or Automatic Transition from DC/DC to bypass mode
• Up to 95% Efficiency, 25uA (typ.) Quiescent Current and 30nA
(typ.) Shutdown Current
• Excellent low Output Voltage Ripple
• DCS-Control™ topology
• Package: 1mm x 1.5mm QFN and 0402 caps, 0603 inductor
Product overview
TPS62730 is a high frequency synchronous step-down DC/DC
converter optimized for ultra low-power wireless applications, such as
TI’s low power wireless sub 1-GHz and 2.4 GHz RF transceivers. The
device reduces the current consumption drawn from the battery during
TX and RX mode by high-efficient step-down voltage conversion.
• Applications include:
– Bluetooth® low energy systems
TI Information – Selective Disclosure 9
– Metering
– Building technologies
– Mobile phones
– Consumer electronics
– Medical and human interface devices
Order of Target Customer Preferences
1.Power Saving
– Efficiency of up to 95%
– Active control through RF device enables
20-30% reduction of battery current
2.Performance
– Superior EMI and noise performance
TI Information – Selective Disclosure
– Superior EMI and noise performance
– No compromise on RF transmission power
3.Size
– Solution size <12% allows for fitting it easily on
the main PCB
– Max 1mm solution height
TPS62730: Power Savings100mA Low Noise DC/DC solution with Bypass Mode
TX Current Analysis CC430 / TPS62730
15.0E -3
20.0E -3
25.0E -3
30.0E -3
35.0E -3
40.0E -3
TI Information – Selective Disclosure
• Battery current is significantly reduced by adding TPS62730 to the solution
• High capacity batteries are expensive; an additional regulator is quickly
compensated through the power savings
000.0E+0
5.0E -3
10.0E -3
~11 10 0 -6 ~11 10 0 -6 ~11 10 0 -6
dBm dBm dBm
VCC: 3.0V VCC: 3.3V VCC: 3.6V
CC430 & TPS62730 Bypass 37.8E-3 34.8E-3 17.9E-3 15.0E-3 37.8E-3 34.9E-3 17.9E-3 15.0E-3 37.9E-3 34.8E-3 18.0E-3 15.1E-3
CC430 & TPS62730 29.6E-3 27.3E-3 14.1E-3 11.8E-3 27.1E-3 25.2E-3 12.9E-3 10.8E-3 25.3E-3 23.3E-3 11.9E-3 10.0E-3
TPS62730: Performance100mA Low Noise DC/DC solution with Bypass Mode
TI Information – Selective Disclosure
• Superior EMI and noise performance
• DCS-Control™ topology allows
• Fast AC line and transient load response
• Smooth transition between PWM and Power Save Mode
• Low output voltage ripple
TPS62730
VINC1
L1
TPS62730: Solution Size100mA Low Noise DC/DC solution with Bypass Mode
TI Information – Selective Disclosure
Proposed components size:
CIN, COUT: 0402 (1x0.5mm2)
L = 2012 size (2x1.2mm2)
IC: 1x1.5mm size (1.5mm2)
• Small solution footprint allows for fitting it
easily on the main PCB
• 1mm max solution height
GND VOUT
1
C2Total area is less
than 12mm²
TPS62730 target applications
• Metering– Gas, Water, Electricity Meter
– Heat cost allocator
– Consumer Interface
• Fitness & Healthcare:– Wearable monitoring
– Sports gear
• TPS62730 is a voltage regulator perfect for power-constrained applications
• High efficiency and low noise allow the POL regulator to support Low Power RF and BLE devices to either run longer with a given
TI Information – Selective Disclosure
• Bluetooth Accessories:– Headsets
– Consumer Audio
• Building Management:– Light, Heat and Safety mash networks
– Security & Surveillance
• Mobile phone– Smart Phones
– Feature Phones
Power RF and BLE devices to either run longer with a given battery or reduce costly battery capacity
Implementation diagrams
TI Information – Selective Disclosure15
TPS62730 and CC2540 Bluetooth® low energy system-on-chip device
TI Information – Selective Disclosure 16
TPS62730 and CC430 low power MCU
TI Information – Selective Disclosure 17