tpc status report
DESCRIPTION
Marian Ivanov. TPC status report. Outline. Planning tool Savannah bugs concerning TPC TPC reconstrunction status (Thursday 25 June 2009) TPC calibration/alignment using Kalman Filter ( Thursday 25 June 2009) . Planning tool. - PowerPoint PPT PresentationTRANSCRIPT
23.06.2009
TPC status report
Marian Ivanov
23.06.2009
Outline
Planning tool
Savannah bugs concerning TPC
TPC reconstrunction status (Thursday 25 June 2009)
TPC calibration/alignment using Kalman Filter ( Thursday 25 June 2009)
23.06.2009
Planning tool
2471 – New OCDB entry – time dependent gain added and used in the reconstruction – Calib/TimeGain (To be added also to the OFFLINE OCDB)
2468 – New OCDB entry for drift velocity
Array of spline fits (corrections) (data volume ~ 1 Kby)
Different fits for each trigger mask (identified by strings) + one for all trigger+ one for calibration using laser
Not yet in OCDB
2468 b - New OCDB Entry for space point correction (array of Transformations) (Thursday presentation)
2468 – Work in progress (special TPC HLT/OFFLINE meeting on Thursday)
23.06.2009
Drift velocity correction Correction using tracks
crossing central electrode
Data corrected for P/T
Open issue – P and T in Online (HLT) different time granularity than in OFFLINE
Verification of procedure using laser
Not yet done
Not overlap between cosmic and usable laser tests
Calibration using ITS/TPC matching as AnalysisTask – Work in progress
Rel
ativ
e co
rrec
tion
23.06.2009
Planning tool / Simulation
2454 – 2455 - Done
2456 – To be done (before 03.07)
2458 – Working
2459 – Time stamp for simulated events missing – potential problems to apply calibration parameters changing during the run (e.g. drift velocity, gain)
23.06.2009
Gain calibration
23.06.2009
Planning tool
2460
2461 – Stored in the OCDB Procedure to be tested in P2 (Christian Lippmann)
2462 – New RCU data format used in Das, usage in the reconstruction to be tested/commited (Jens Wiechula)
23.06.2009
Planning tool - Reconstruction
2077 – Cuts to be tuned in the analysis
2309, 2463 – Done, to be verified in July
2464-2467 – AliExternalTrackParam::Propagate doesn't take into account Br and Brfi – to be fixed by Jouri Belikov
Preliminary tests with exact MC references - improvement in pt, but not in theta/z
2465 – Time dependent gain correction in OCDB, position dependend correction also implemented used (small mismatch between simulated and real data)
23.06.2009
Planning tool.
2477 – To be tested at Point 2
Other not yet finished – (Peter Christiansen)
QA checker for TPC simulation/reconstruction implemented in parallel in PWG1- expert mode (see Jacek Otwinoski talk)
QA for the detector matching – expert mode – to be added
23.06.2009
Online Calibration
Ø Any news/updates on the procedures?
Drift velocity and gain gain calibration (HLT)
DA using raw data- Drift velocity calibration to be commited soon
Ø Is everything properly integrated in the Shuttle framework?
Not the case for prevously mentioned entries
Ø For which run type would you need the GRP object (in order to be able to reconstruct the run)?
Laser run in addition
Ø Are any updates necessary in the Shuttle code running at P2?
See above
23.06.2009
Alignment/Calibration offline procedures
Ø If you did not mention this during the review, do you foresee any offline procedure especially as far as alignment is concerned?
Yes
Ø Does your procedure comply with the Framework?
See presenetation on Thursday (Kalman filter)
In case of filtering the ESD friends:
Ø What is the size of the fraction you would need to store (compared to the present size/ to the ESDs size; depending on the type of collision, energy...)?
Pt cut, all cosmic, sample of all data (1-5 %)
Ø Would you need to store any other object?
Calibration components (drift, gain)
Ø What are the specific requirements of your task, if any?
2 kind of tasks – light (to run on full statistisitc), heavy (to run on filtered ESD friends) – special calibration train
23.06.2009
Alignment/Calibration offline procedures
Ø What is the foreseen size of the object you will need to store? (depending on the type of collision, energy...)
~1-10 MBy
Ø Is the memory consumption of your procedure under control?
Gain correction calibration, PID calibration, Alignment – ThnSparse used
Ø Is the AnalysisTask to compute the alignment/calibration constants already defined?
2 implementations – one inside of the framework, combined calibration/alignment – not Analysis task (yet?)
Ø Would you need manual intervention before writing the object in the OCDB? Do you foresee to have it automatic?
Manual intervention needed for everything except of the gain and drift velocity calibration
Ø What are the specific requirements of your task, if any?
23.06.2009
Savannah
Ø Is your detector concerned by any important Savannah report?
Yes
Ø If yes, does this affect the quality of the physics results?
Pt, theta, z shift influence physical result
Ø What are the current actions to solve these problems?
Taking into acount Br and Brfi component of the magnetic field
23.06.2009
Test with new propagation inside of the TPC (Jacek)
23.06.2009
Test with new propagation inside of the TPC (Jacek)
23.06.2009
Savannah
23.06.2009
Performance issues
Ø Is your detector affecting the overall CPU and memory (resident and virtual) consumption in the simulation (including the expert QA mode)?
Ø Is your detector affecting the overall CPU and memory (resident and virtual) consumption in the reconstruction (including the expert QA mode)?
No in reconstruction.
Expert QA mode affected
Ø If yes, what are the current actions to solve these problems?
Expert mode to be done in Performance train on filtered ESD friends