tp series - vpt, inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s,...
TRANSCRIPT
![Page 1: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/1.jpg)
TP Series
TP-XXX-10 http://www.vptpower.com
Sales Information: Phone: (425) 353-3010
Fax: (425) 353-4030 E-mail: [email protected]
1
ACCESSORY THERMAL PADS
DESCRIPTION
The TP series of accessory thermal pads provide an
effective method of ensuring a low thermal resistance path, good thermal performance, and excellent isolation between the DC-DC converter and the mounting plane. They are intended to fill air gaps between DC-DC converters and printed circuit boards, heat sinks, or chassis without the use of thermal greases in order to improve heat conduction. The thermal pads have good thermal conductivity and extremely high conformability. They consist of an extremely soft silicone elastomer loaded with aluminum oxide particles, laminated to a thin thermally conductive
reinforcing material which resists puncture and eases handling. They are non-toxic, do not require grease and do not exhibit the cracking problems of ceramic materials. The pads may temporarily react to some cleaning agents by swelling, but are not damaged after the solvent is removed.
FEATURES
• Thermal Conductivity: 2.6 W/m-K
• Breakdown Voltage: >5 kV
• Temperature Rating: -60°C to 200°C
• Color: Gold
• Specific Gravity: 3.2 g/cc
• Heat Capacity: 1 J/g-K
• Hardness (Shore Type 00): 80
• Dielectric Constant: 7.0
• Volume Resistivity: 1010 Ω-m
![Page 2: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/2.jpg)
TP Series
TP-XXX-10 2
CROSS REFERENCE
THERMAL PAD
DC-DC CONVERTER SERIES THERMAL
RESISTANCE FIGURE
TP-001 DVFL2800S, DVFL2800D 0.07°C/W 1
TP-002 DVHF2800S, DVHF2800D 0.16°C/W 2
TP-003 DVTR2800S, DVTR2800D, DVHV2800S, DVHV2800D, DVEHF2800T,
DVHE2800S 0.11°C/W 3
TP-004 DVTR2800T, DVETR2800S, DVETR2800D, DVWR2800T 0.11°C/W 4
TP-005 DVSA2800S, DVSA2800D 0.27°C/W 5
TP-006 DV200-2800S, DV200-2800D, DV200-27000S, DV200-27000D 0.06°C/W 6
TP-007 DVHF+2800T, DVSB2800D, DVGF+2800T 0.16°C/W 7
TP-008 VPT5-2800S, VPT5-2800D, VPTF1-28, VHR5-2800S, VHR5-2800D, VHRF1-28
0.25°C/W 8
TP-009 VPT15-2800S, VPT15-2800D, VPTF3-28, VHR15-2800S, VHR15-2800D,
VHRF3-28 0.17°C/W 9
TP-010 VPT30-2800S, VPT30-2800D, VPT30-2800T, VPTF10-28, VHR30-2800S, VHR30-2800D, VHR30-2800T, VHRF10-28
0.13°C/W 10
TP-011 VPT100-2800S, VPT100+2800D, VPT100+2800S, VPTF20-28, VPTPCM, VPTHVM, VPTi10, VPTc10, VHR100-2800S, VHR100+2800D,
VHR100+2800S, VHRF20-28
0.08°C/W 11
TP-012 VXR7-2800S, VXR7-2800D, VXRF2-28 0.25°C/W 12
TP-013 VXR15-2800S, VXR15-2800D, VXRF5-28 0.19°C/W 13
TP-014 VXR15-2800SM, VXR15-2800DM, VXRF5-28M 0.19°C/W 14
TP-015 VXR30-2800S, VXR30-2800D, VXRF10-28 0.17°C/W 15
TP-016 VXR100-2800S, VXRF20-28 0.08°C/W 16
TP-017 VPT250-2800S, VXR250-2800S 0.05°C/W 17
TP-018 VXR100-2800D 0.07°C/W 18
![Page 3: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/3.jpg)
TP Series
TP-XXX-10 3
DIMENSIONS (TP-001)
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole
locations, and ± 0.040” for all other unspecified dimension tolerances.
Figure 1 – Dimensions (TP-001)
![Page 4: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/4.jpg)
TP Series
TP-XXX-10 4
DIMENSIONS (TP-002)
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole
locations, and ± 0.040” for all other unspecified dimension tolerances.
Figure 2 – Dimensions (TP-002)
![Page 5: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/5.jpg)
TP Series
TP-XXX-10 5
DIMENSIONS (TP-003)
Note: 1. Dimensions are in inches.
2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole
locations, and ± 0.040” for all other unspecified dimension tolerances.
Figure 3 – Dimensions (TP-003)
![Page 6: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/6.jpg)
TP Series
TP-XXX-10 6
DIMENSIONS (TP-004)
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole
locations, and ± 0.040” for all other unspecified dimension tolerances.
Figure 4 – Dimensions (TP-004)
![Page 7: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/7.jpg)
TP Series
TP-XXX-10 7
DIMENSIONS (TP-005)
Note: 1. Dimensions are in inches.
2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole
locations, and ± 0.040” for all other unspecified dimension tolerances.
Figure 5 – Dimensions (TP-005)
![Page 8: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/8.jpg)
TP Series
TP-XXX-10 8
DIMENSIONS (TP-006)
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole
locations, and ± 0.040” for all other unspecified dimension tolerances.
Figure 6 – Dimensions (TP-006)
![Page 9: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/9.jpg)
TP Series
TP-XXX-10 9
DIMENSIONS (TP-007)
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole
locations, and ± 0.040” for all other unspecified dimension tolerances.
Figure 7 – Dimensions (TP-007)
![Page 10: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/10.jpg)
TP Series
TP-XXX-10 10
DIMENSIONS (TP-008)
.060
0
.10
3
.90
0
1.0
03
0.035.200
.335
.700
.988
.118
0
.035
.435
.800
.222
.422 .472
.222
.672
.872
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole
locations, and ± 0.010” for all other unspecified dimension tolerances.
Figure 8 – Dimensions (TP-008)
![Page 11: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/11.jpg)
TP Series
TP-XXX-10 11
DIMENSIONS (TP-009)
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole
locations, and ± 0.010” for all other unspecified dimension tolerances.
Figure 9 – Dimensions (TP-009)
![Page 12: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/12.jpg)
TP Series
TP-XXX-10 12
DIMENSIONS (TP-010)
2X .125 6X .060 R.030 TYP
0
.1
15
.0
50
1.6
00
1.6
50
1.7
65
0
.185
.100
.200
.250
.400
.500
.600
.750
.975
1.135
0
.025
.200 .300
.400 .500
.650 .700
.800
.850
.950
1.000
Note: 1. Dimensions are in inches.
2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole
locations, and ± 0.010” for all other unspecified dimension tolerances.
Figure 10 – Dimensions (TP-010)
![Page 13: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/13.jpg)
TP Series
TP-XXX-10 13
DIMENSIONS (TP-011)
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole
locations, and ± 0.010” for all other unspecified dimension tolerances.
Figure 11 – Dimensions (TP-011)
![Page 14: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/14.jpg)
TP Series
TP-XXX-10 14
DIMENSIONS (TP-012)
R.030 TYP.
4X .060
0
.050
.250
.550
.200
.450
.650
.750 .800
.948
.148
0
.9
00
.9
98
.0
98
Note: 1. Dimensions are in inches.
2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole
locations, and ± 0.010” for all other unspecified dimension tolerances.
Figure 12 – Dimensions (TP-012)
![Page 15: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/15.jpg)
TP Series
TP-XXX-10 15
DIMENSIONS (TP-013)
.060 TYP
0
.300
.500
.800
.988
.178
0
.1
03
1.2
00
1.3
03
.200
.400
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole
locations, and ± 0.010” for all other unspecified dimension tolerances.
Figure 13 – Dimensions (TP-013)
![Page 16: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/16.jpg)
TP Series
TP-XXX-10 16
DIMENSIONS (TP-014)
2X .137 .060 TYP.
0
.443
.300
.500
.800
1.243
0
.1
03
1.1
15
.0
85
1.2
00
1.3
03
1.055
.200
.255
.400
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”.
3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole locations, and ± 0.010” for all other unspecified dimension tolerances.
Figure 14 – Dimensions (TP-014)
![Page 17: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/17.jpg)
TP Series
TP-XXX-10 17
DIMENSIONS (TP-015)
2X .137 5X .060
R.030 TYP.
0 0
.050
.200
.400
.300
.650
.700
.225
.398
.898
.200
.150
.100
.150
.500
.725 0
.1
23
.0
50
1.4
00
1.4
50
1.5
73
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole
locations, and ± 0.010” for all other unspecified dimension tolerances.
Figure 15 – Dimensions (TP-015)
![Page 18: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/18.jpg)
TP Series
TP-XXX-10 18
DIMENSIONS (TP-016)
R.030 TYP 4X .137
0
.1
23
.0
50
2.0
50
2.1
00
2.2
23
0
.200
.373
.150
.300
.350
.450
.650
.800
1.000
1.173
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole
locations, and ± 0.010” for all other unspecified dimension tolerances.
Figure 16 – Dimensions (TP-016)
![Page 19: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/19.jpg)
TP Series
TP-XXX-10 19
DIMENSIONS (TP-017)
4X .137
0
.228
2.000
2.228
0
.2
18
1.9
00
2.1
18
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole
locations, and ± 0.010” for all other unspecified dimension tolerances.
Figure 17 – Dimensions (TP-017)
![Page 20: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/20.jpg)
TP Series
TP-XXX-10 20
DIMENSIONS (TP-018)
.060 4X .137
R.030 TYP.
0
.0
50
.1
23
2.1
50
2.2
00
2.3
23
0
.250
.423
.200
.100
.400
.600
.700
.800
1.050
1.223
Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole
locations, and ± 0.010” for all other unspecified dimension tolerances.
Figure 18 – Dimensions (TP-018)
![Page 21: TP Series - VPT, Inc. · 2019. 5. 22. · tp-001 dvfl2800s, dvfl2800d 0.07°c/w 1 tp-002 dvhf2800s, dvhf2800d 0.16°c/w 2 tp-003 dvtr2800s, dvtr2800d, dvhv2800s, dvhv2800d, dvehf2800t,](https://reader035.vdocuments.mx/reader035/viewer/2022062510/613526cedfd10f4dd73c303f/html5/thumbnails/21.jpg)
TP Series
TP-XXX-10 21
ORDERING INFORMATION
TP - 001
1 2
(1) (2)
Product Series Thermal Pad
Configuration
TP
001 002
003 004 005 006 007 008
009 010 011 012 013 014
015 016 017 018
Please contact your sales representative or the VPT Inc. Sales Department for more information concerning additional configurations for other applications.
CONTACT INFORMATION
To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales Department at:
Phone: (425) 353-3010
Fax: (425) 353-4030 E-mail: [email protected]
All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors
or omissions. The products or specifications contained herein are subject to change without notice.