towards international linear collider: experiments...
TRANSCRIPT
![Page 1: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/1.jpg)
Towards International Linear Collider:
Experiments At ATF2 (Final Focus Test)
K. Kubo (KEK) ATF2 Collaboration 2014.06.18 IPAC14
![Page 2: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/2.jpg)
ILC beam at Interaction Point (Focal point) For High Luminosity
σy ~6 nm
σx ~470 nm (σz ~300000 nm)
Horizontal beam size is limited by beam-beam force (beamstrahlung)
Luminosity limited by vertical beam size
Flat beam
For small beam we need • Low vertical emittance • Small aberrations in Final Focus System
Being tested at ATF(Accelerator Test Facility at KEK)
![Page 3: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/3.jpg)
ATF, Accelerator Test Facility at KEK
1.3 GeV
![Page 4: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/4.jpg)
ATF2 International Collaboration Design, Construction, Operation
CERN Germany DESY France IN2P3; LAL, LAPP, LLR UK Univ. of Oxford Royal Holloway Univ. of London STFC, Daresbury Univ. of Manchester Univ. of Liverpool Univ. College London Italy INFN, Frascati Spain IFIC-CSIC/UV Russia Tomsk Polytechnic Univ.
Japan KEK Tohoku Univ. Univ. of Tokyo Waseda Univ. Nagoya Univ. Kyoto Univ. Hiroshima Univ. China IHEP Korea PAL KNU India RRCAT
USA SLAC LBNL FNAL LLNL BNL Cornell Univ. Notre Dome Univ.
ATF Main Institutes
![Page 5: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/5.jpg)
Chromatic Aberration in Final Focus Different focal points for different energy particles in beam. Energy spread causes large beam size.
Low energy High energy
Correction: Sextupole magnets located at Horizontal Dispersion Focal strength proportional to particle energy cancels chromatic aberrations.
NOT SO SIMPLE Other aberrations (geometrical aberration) created by the sextupole field Because of energy-independent position spread (beam size)
![Page 6: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/6.jpg)
Global chromatic correction Final Quads
Chromatic aberration Collision
Chromaticity 2 Chromaticity 1
Mainly for y Mainly for x
1 2
β1/2
ηx
2,1,
Matrix Transfer
xx
Iηη =
−=
6-poles 6-poles
Put two 6-pole magnets symmetrically. Geometrical aberrations automatically cancelled.
Chromaticity
Add 2 regions dedicated to Chromaticity
![Page 7: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/7.jpg)
Local chromatic correction
Final Quadrupole magnets
Chromaticity
collision
Chromatic Correction 6-pole magnets
Geometric Correction 6-pole magnets
Geometrical Aberration
~nπ ~nπ
Chromaticity Cancel
Horizontal Dispersion
Put 6-pole magnet next to each of Final Quads for Chromatic correction Correct geometrical aberration in upstream
(P.Raimondi and A.Seryi, Phys. Rev. Lett. 86, 3779 (2001))
![Page 8: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/8.jpg)
Comparison of Chromaticity Correction Methods
• Shorter beam line
• Better designed performance (Large energy acceptance.
Small halo at final quads.)
Advantages of “Local” correction
Disadvantage?
Chosen for ILC
• Complicated design
• Difficulties in tuning (operation)
Chromaticity 2
Chromaticity 1 Global
Local
(P.Raimondi and A.Seryi, Phys. Rev. Lett. 86, 3779 (2001))
![Page 9: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/9.jpg)
Expected Difficulties/Complications In Local Chromatic Correction
• For Designing – No obvious (simple) symmetries for cancelling aberrations
• In Operation – Interleaved sextupoles Interference between horizontal and
vertical parameters – Nonzero angle dispersion at focal point – Many aberrations can be coupled
Expected difficulties: Motivation of ATF2 Project. Test of Local Correction
Global Correction was successfully tested in 1994 at SLAC: FFTB(Final Focus Test Beam) (V. Balakin et al., Phys. Rev. Lett. 74, 2479 (1995))
![Page 10: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/10.jpg)
Two Goals of ATF2
• Small beam size (Goal 1) : This Report – Demonstration of a compact final focus system based
on local chromaticity correction – Designed beam size: 37 nm – (Without chromatic correction, beam size is ~450 nm.)
• Control of beam position (Goal 2) – Demonstration of beam orbit stabilization with a few
nanometer precision at the IP • Establishment of beam jitter controlling techniques at the
nanometer level with an ILC-like beam
ATF2 Collaboration, “ATF2 Proposal,” (2005)
![Page 11: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/11.jpg)
Parameter ILC ATF2 Beam Energy [GeV] 250 1.3 Energy Spread (e+/e-) [%] 0.07/0.12 0.06~0.08 Final quad – IP distance (L*) (SiD/ILD detector) [m]
3.5/4.5 1.0
Vertical beta function at IP (β*y) [mm] 0.48 0.1 Vertical emittance [pm] 0.07 12 Vertical beam size at IP (σ*y) [nm] 5.9 37 L*/β*y (~natural vertical chromaticity, SiD/ILD detector)
7300/9400 10000
Design parameters of ILC and ATF2 Final Focus
ATF2 Collaboration, “ATF2 Proposal,” (2005)
ILC Technical Design Report, https://www.linearcollider.org/ILC/Publications/Technical-Design-Report
![Page 12: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/12.jpg)
Final Focus Optics, ILC and ATF2
ILC
ATF2
yx,*β
yx,*β
xη
xη
Same magnet configuration, Almost identical optics
Up to 500 GeV ~700 m
1.3 GeV ~30 m
![Page 13: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/13.jpg)
Tolerances for Final Focus System Magnet Errors Comparison of ILC and ATF2
Field strength
Rotation
Jitter position
Static position
Same magnet names, similar tolerances.
ILC ATF2
ATF2 Collaboration, “ATF2 Proposal,” (2005)
![Page 14: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/14.jpg)
Figure from: Y. Yamaguchi, Master thesis at Graduate School of Science, The University of Tokyo, 2010
Beam Size Monitor at Focal Point (IPBSM) Shintake Monitor, using interference of laser beam
![Page 15: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/15.jpg)
Scan interference fringe phase. Fit modulation M:
Fringe phase
Gam
ma-
ray
sign
al G
Example
( ))cos(1)( 00 φφφ ++= MGG
−= 2
222expcosh
M σπθ
Evaluate beam size, σ, from this expression.
Beam size measurement
For Gaussian beam profile Possible errors reduce M and make apparent beam size larger. Measured size: Upper limit
Small M
)2/sin(2 θλ
=h
Large beam
Large M
Small beam
![Page 16: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/16.jpg)
Measureable Beam Size Range of IPBSM
0
0.2
0.4
0.6
0.8
1
10 100 1000 104
174O
30O
8O
2 O
Mod
ulat
ion
σy (nm)
)2/sin(2 θλ
=hPitch of interference fringe:
Sensitive beam size range depends on crossing angle (θ) of two laser beams.
There are 3 different crossing angle modes for covering wide range.
Crossing angle mode 174 deg. 30 deg.
2-8 deg. continuously adjustable
Covers 25 nm – 6000 nm
![Page 17: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/17.jpg)
Vertical Beam Size Tuning (Final stage of beam tuning)
Changing parameters Corrected coupling Linear knobs (Linear Optics adjustment)
6-poles horizontal moves yy’ (Focal Position)
6-poles vertical moves yE (Dispersion)
x’y (x-y coupling) Non-linear knobs (2nd order optics adjustment)
6-poles strength x’yy’ yy’E (chromaticity)
Skew 6-poles strength xxy xyE
yEE (2nd order dispersion) yy’y’
Each knob changes one coupling term.
![Page 18: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/18.jpg)
After each scan, “knob” was set at the peak of the fitted line.
Examples of Tuning knob Scans yy’ coupling knob yy’E coupling knob
M vs. knob strength IPBSM 30 deg. mode
M vs. knob strength IPBSM 174 deg. mode
![Page 19: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/19.jpg)
History of measured minimum beam size
Still being improved.
0
50
100
150
200
250
300
350
400
Mea
sure
d M
inim
umBe
am S
ize
(nm
)
Dec 2010
Dec 2012
Feb-Jun 2012
Mar 2013Apr 2014
Eart
hqua
ke (M
ar 2
011)
May 2014Jun 2014
![Page 20: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/20.jpg)
What Contributed to Improvement? • Cures for Higher Order Magnetic Field Errors.
– Multi-pole field components of Quadrupole magnets • Adopt optics with 10 times larger β*x than nominal, smaller beam
size at magnets reduce x-y coupling effects • Replace final QF magnet
(Small aperture, strong multi-pole fields Large aperture, weak multi-pole fields) • Found one coil of strongest 6-pole magnet was shorted
• Exchange with weakest one (January 2013) • Turned off, by changing 2nd order optics (April 2014)
• Suppress Orbit Drifts in Final Focus Beam Line – Improvement of orbit feedback
• Improvement of Beam Size Monitor • Wakefield reduction (?)
![Page 21: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/21.jpg)
Beam Size Tuning after 3 weeks shutdown Small beam (~60 nm) observed ~32 hours from operation start
0
200
400
600
800
1000
10 20 30 40 50 60
2-8 deg. mode30 deg. mode174 deg. mode
σ y (n
m)
Time (hours) from Operation Start after 3 Weeks Shutdown Week 2014 April 7
Different colors: different crossing angle modes
![Page 22: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/22.jpg)
Beam Size Tuning after 3 days shutdown Small beam (~60 nm) observed ~16 hours from operation start
0
200
400
600
800
1000
10 20 30 40 50 60 70
2-8 deg. mode30 deg. mode174 deg. mode
σy (n
m)
Time (hours) from Operation Start after 3 days shutdown
Week from April 14, 2014
Week 2014 April 14
![Page 23: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/23.jpg)
Beam is stable for 30 – 60 min. without tuning. Examples of consecutive beam size measurements
April 17, 2014 Mean: 0.42 Standard dev.: 0.04 IPBSM
Modulation (174 degree Crossing angle)
Mean: 0.50 Standard dev.: 0.04
May 22, 2014
Beam size Evaluated from Modulation (no systematic error assumed)
Mean: 55 nm Standard dev.: 3 nm
Mean: 50 nm Standard dev.: 3 nm
Bunch charge ~ 0.16 nC Bunch charge ~ 0.09 nC
![Page 24: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/24.jpg)
Example of vertical beam size measurement (Fringe Phase Scan)
There must be some systematic errors, drift of beam position or monitor’ laser, etc., which tend to reduce modulation and make apparent beam size larger.
Data on April 17, 2014. IPBSM with a crossing angle of 174 degrees. Bunch charge ~0.16 nC. Fitted modulation is 0.45, evaluated beam size 53 nm
![Page 25: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/25.jpg)
Data of Last Week (June 12)
0
1
2
3
4
34 36 38 40 42 44 46 48 50
20140612
Ent
ries
Evaluated σy (nm)
Mean: 44 nm Standard dev.: 3 nm
Beam Size Evaluated from Modulation (no systematic error assumed)
0
1
2
3
4
0.5 0.55 0.6 0.65 0.7 0.75
20140612
Ent
ries
Modulation (Crossing Angle 174 degrees)
Mean: 0.58 Standard dev.: 0.05
IPBSM Modulation (174 degree Crossing angle)
Bunch charge ~ 0.16 nC
![Page 26: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/26.jpg)
IPBSM modulation as function of bunch population. Measured with crossing angle 174 degrees (left) and 30 degrees (right).
Beam Size Depends on Bunch Intensity
nm. 3-2by size beamintensity -zero than larger bemay nC) 0.16-0.1(at size beam minimum Measured
nm/nC. 100 as fitted is ,)0()( Assuming 2222
⇒
+= wqwq yy σσ
![Page 27: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/27.jpg)
Intensity Dependence • Beam size strongly depends on bunch intensity.
– Most probably, due to transverse wakefield. – Compare with ILC, much stronger effects: Low beam energy (1.3 GeV/250 GeV) and Long bunch (7 mm/0.3 mm)
• Estimation of effects of Wakefield – Wakefield of Cavity BPMS, Bellows, Steps are calculated. – Experimental studies by introducing wakefield source on mover.
• Reduction of wakefield – Shield discontinuities in beam line – Remove possible strong wakefield sources – Move possible sources from high beta region to low beta region
![Page 28: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/28.jpg)
Remaining Issues for Goal 1 (small beam)
Beam Size Still Slightly Larger Than Designed 37 nm • Confirm emittance of incoming beam • Confirm optics matching (β*y) • Further Improvement of beam size monitor • Detect/correct beam position drift/jitters
– High resolution BPMs at IP region will solve the question. (related to Goal 2, stabilization of beam orbit)
Study of intensity dependence (Wakefield)
![Page 29: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/29.jpg)
Status of Goal 2 (Stable beam)
• Intra-pulse, bunch to bunch feedback successfully demonstrated – Sub-micron to micron level stability. Limited by BPM resolution
and bunch to bunch uncorrelated jitters.
• For nanometer level stabilization – High resolution BPMs installed around focal point. – Basic BPM performance studies on going. – Feedback is being prepared.
Other reports in this conference. ID: 2811, TUPME009, P. Burrows, et.al. ID: 2781, THOAA02, N. Blaskovic, et.al.
![Page 30: Towards International Linear Collider: Experiments …research.kek.jp/group/nkocbeam/report/2014/IPAC14_Kubo.pdfTowards International Linear Collider: Experiments At ATF2 (Final Focus](https://reader031.vdocuments.mx/reader031/viewer/2022041108/5f0c08d57e708231d4336d28/html5/thumbnails/30.jpg)
SUMMARY Small beam • Performance of Final Focus System of ILC, Local
Chromatic Correction, Has Been Demonstrated. – Vertical beam size ~45 nm was confirmed at low
intensity. • Beam size tuning method for this beam size level
established – Small beam routinely observed.
Stable beam • Feedback system successfully tested. • Nanometer level stabilization being prepared.