tourcob par rgbw - showtools international€¦ · 2 die casting 200w cob par 4-in-1 rgbw user...
TRANSCRIPT
1
TOURCOB PAR RGBW
2
Die Casting 200W COB Par 4-in-1 RGBW
User Manual
Please read the manual before operation.
A. SPECIFICATION
1. Voltage: AC100V-240V, 50Hz/60Hz
2. Power consumption: 210W
3. LED: 200W RGBW 4-in-1
4. Beam angle: 60°/30°/15°
5. DMX channels: 4, 6, 8ch
6. Operation mode: LCD display
7. Working temperature: -20~40℃
8. IP grade: IP20
9. Dimension: 269*203.3*437mm
10. Inner packing size:500*300*270mm
11. Outer packing size:525*625*575mm
12. Net weight: 4.8kgs
13. DMX linking: 30pcs
14. Power linking: 8pcs@240V, 4pcs@110V
15. Luminous Flux:
60° 8308lm
30° 6744lm
15° 6263lm
16. Lumen:
R 410lux@2m
G 746lux@2m
B 161lux@2m
W 803lux@2m
ALL 2036lux@2m
3
B. OPERATION
This series product has rich effect programs, easier operation, there are eight working modes:
Auto Running Mode
Built-in Programs Mode
DMX Control Mode
Slave Mode
Sound-active Mode
Dimming Mode
Setting Mode
Information Mode
1. OPERATION
a. Operation Mode Transformation
2. Operation Mode Illustration
(1)Auto running mode
The light will cycle operation in accordance with the speed and strobe of the built-in program
Program Show:02~ Program Show:14
(2)Built- in program mode
There are 14 effect programs in this mode. You can select by the up or down button.
a. ProgramShow01
Static colors are as follows. They can be selected by up or down button.
0.Black 1.Red 2.Green 3.Blue 4.White 5.Amber 6.Orange 7.Yellow
8.Purple 9.Pink 10.Cyan 11.Light
Red
12.Light
Green
13.Light
Blue
14.Warm
White
15.Cold
White
b. Static color strobe setting. Please press the setup key and up or down key.
The detail is as follows.
c. Press the setup key to set the run speed or strobe value. As follows.
4
(3) Slave mode
After connecting DMX cable, the light will run with the main fixture at same step.
(4) DMX control mode
You can control the light by the control console or software after connecting DMX cable. The
detail is as follows.
3. Channel protocol specification
a) Channels 4-CH
CH1 CH2 CH3 CH4
Red Green Blue White
0~255 0~255 0~255 0~255
b) Channels 6-CH
CH1 CH2 CH3 CH4 CH5 CH6
Dimmer Red Green Blue White Strobe
0~255 0~255 0~255 0~255 0~255 5~255
c) Channels 8-CH
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
Dimmer Red Green Blue White Program Speed Strobe
0~255
0~255 0~255 0~255 0~255 CH2~5 0
Color Marco DMX
Value
R(0)G(0)B(0)W(0) 0~15
R(255)G(0)B(0)W(0) 16~31
R(0)G(255)B(0)W(0) 32~47
R(0)G(0)B(255)W(0) 48~63
R(0)G(0)B(0)W(255) 64~79
R(255)G(150)B(0)W(0) 80~95
5
Program
01
1~16
R(255)G(180)B(0)W(0) 96~111
5~255
R(255)G(255)B(0)W(0) 112~127
R(255)G(0)B(255)W(0) 128~143
R(255)G(0)B(140)W(0) 144~159
R(0)G(255)B(255)W(0) 160~175
R(255)G(0)B(0)W(210) 176~191
R(0)G(255)B(0)W(210) 192~207
R(0)G(0)B(255)W(210) 208~223
R(255)G(200)B(40)W(90) 224~239
R(255)G(255)B(255)W(255) 240~255
Program
02
17~33
0~255
Program
03
34~50
Program
04
51~67
Program
05
68~84
Program
06
85~10
1
Program
07
102~1
18
Program
08
119~1
35
Program
09
136~1
52
Program
10
153~1
69
Program
11
170~1
86
Program
12
187~2
03
Program
13
204~2
20
Program
14
221~2
37
Sound 238~2
55
0~255 (Sensitivity 0~31)
(5) Sound active mode
The light can transform effect in accordance with the beautiful music.
Press the setup key to enter and set sound active sensitivity by up or down key.
The detail is as follows.
6
(6) Dimming mode
You can set monochrome value. The detail is as follows.
(7) Setting mode
The detail is as follows.
a) Dimming curve setting
1) Linear dimming
2) Square Law dimming
3) Inv Square Law dimming
7
4) S-curve dimming
b ) Dimmer Speed dimming
c)LCD backlight time setting
There are five backlight time. (10s，20s，30s，60s，ON(bright)
d) Restore the factory setting
After restore the factory setting, all the data will be recovered the original state.
e) DMX Fail Control console signal clear
DMX Fail Off (When the DMX signal connects unsuccessfully, the lighting
will be closed.)
Hold (When the DMX signal connects unsuccessfully, the lighting
will keep the current status)
(f) DMX Synchronization setting
The function is for DMX synchronization setting. Under the condition of DMX mode, no DMX,
several lightings can also synchronize automatically.
DMX Synchronous ON Open DMX synchronization
OFF Close DMX synchronization
(g) Information setting
It can store related information by this mode.
SETUP
8
a. Temperature fault detection
Temperature Normal
Warning! Error (In order to avoid the temperature is too high,
the user need detect the lighting.)
b. Software version
C. Notice
a. When products are power on, pressing the “MODE” and “SETUP” buttons at the
same time. Then they can restore factory settings and the data will be initialized.
b. The products are power on. If the LED display will flash “Tempt error” two times, to
make sure they can operate normally, please check whether the line of internal
temperature control connect well.
c. In order to avoid any problem, please follow the user manual to make sure it is in
safety operations.
d. If the environment temperature is not in the using range, please reduce the using time
of the full power to prevent products damaging because of overheating.
e. In order to prevent the accident, please don’t operate under the condition of charging.
SETUP