toshiba_32z13bg_[sch].pdf

8/11/2019 Toshiba_32Z13BG_[SCH].PDF

1/41

SCHEMATIC DIAGRAM

WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION", "SAFETY

PRECAUTION" AND "PRODUCT SAFETY NOTICE" ON THE MANUAL FOR THIS MODEL.

CAUTION: The international hazard symbols "*" in the schematic diagram and the parts list designate componentswhich have special characteristics important for safety and should be replaced only with types identical to those in theoriginal circuit or specified in the parts list. The mounting position of replacements is to be identical with originals.Before replacing any of these components, read carefully the PRODUCT SAFETY NOTICE on the MANUAL for thismodel. Do not degrade the safety of the receiver through improper servicing.

NOTE:

1. RESISTOR Resistance is shown in ohm [K = 1.000, M = 1.000.000]. All resistors are 1/6W and 5%

tolerance carbon resistor, unless otherwise noted as the following marks.

1/2R = Metal or Metal oxide of 1/2 watt 1/2S = Carbon compsistion of 1/2 watt

1RF = Fuse resistor of 1 watt 10W = Cement of 10 watt

K = 10% G = 2% F = 1%

2. CAPACITOR Unless otherwise noted in schematic, all capacitor values less than 1 are expressed in

?F, and the values more than 1 in pF.

All capacitors are ceramic 50V, unless otherwise noted as the following marks.

Electolytic capacitor Mylar capacitor

MODEL : 32Z13B / 32Z13G


2/41

Electolytic capacitor Mylar capacitor

SCHEMATIC DIAGRAM MODEL : 32Z13B / 32Z13G

WARNING: BEFORESERVICING THISCHASSIS, READTHE "X-RAYRADIATIONPRECAUTION", "SAFETYPRECAUTION" AND"PRODUCT SAFETYNOTICE" ON THEMANUAL FORTHIS MODEL.

CAUTION: The internationalhazard symbols "*" in the schematic diagram and the partslist designate componentswhich have specialcharacteristics important for safety and should be replaced only with types identicalto those in theoriginalcircuit or specified in the parts list. The mounting position of replacements is to be identical with originals.Before replacing any of these components, read carefully the PRODUCT SAFETYNOTICEon the MANUAL for thismodel. Do not degrade the safety of the receiver through improper servicing.

4. Voltages read with DIGITAL MULTI-METERfrom point indicated to chassing ground, using a color bar signal with all

controls at normal, line voltage 220 volts.

5. Waveforms are taken receiving color bar signalwith enough sensitivity.

6. Voltage reading shown are nominalvalues and may vary 20% except H.V.

NOTE:

1. RESISTOR Resistance is shown in ohm [K= 1.000, M = 1.000.000]. Allresistors are 1/6Wand 5%

tolerance carbon resistor, unless otherwise noted as the following marks.

1 /2R= Metalo r Meta lox ide o f 1/2 wat t 1 /2S= Carbon compsis tion of 1 /2 wat t

1 RF = F us e r es is to r o f 1 wa tt 1 0W = Ce me nt of 10 wa tt

K= 10% G = 2% F = 1%

2. CAPACITOR Unlessotherwise noted in schematic, allcapacitor values less than 1 are expressed in

?F, and the values more than 1 in pF.

Allcapacitorsare ceramic 50V, unless otherwise noted as the following marks.

E le ct ol yt ic c ap ac it or M yl ar c ap ac it or

3. The partsindicated with " * " have specialcharacteristics, and should be replaced with identicalparts only.


3/41


4/41


5/41


6/41


7/41


8/41


9/41


10/41


11/41


12/41


13/41


14/41


15/41


16/41


17/41


18/41


19/41


20/41


21/41


22/41


23/41


24/41


25/41


26/41


27/41


28/41


29/41


30/41


31/41


32/41


33/41


34/41


35/41


36/41


37/41


38/41


39/41


40/41


41/41

toshiba_32z13bg_[sch].pdf

Documents