tools equipment section

The Largest Independent O&P Distributor

8 0 9E Q U I P M E N T

EQ

UIP

ME

NT

EQUIPMENTHand Tools Measuring Devices .....................................811 Cutting Tools ..............................................813 Scissors and Shears .....................................817 Punches and Riveting Tools .......................819 Contouring and Bending Devices .............820 Drill Bits and Accessories ...........................821 Heat Guns and Accessories ....................... 822 Miscellaneous Hand Tools .........................824Alignment and Fitting Aids ..........................826Vices ................................................................827Router and Sanding ......................................828Vacuum Equipment .......................................837Ovens ............................................................. 838

Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com

8 1 0 E Q U I P M E N T

EQ

UIP

ME

NT

E Q U I P M E N T Hand Tools 8 1 1


EQ

UIP

ME

NT

MEASURING DEVICES

a. Retractable Measuring Tape

60” length. Retractable flexible vinyl in compact plastic casing. Inch over metric. Handy metal hook at end.

Sold each. From BMI Tools.

Item No. ð RMT-60

b. Standard Measuring Tape

60” length. Flexible fiberglass construction. Inch and metric both sides. Various colors. Sold each. From Fillauer.

Item No. ð SMT-60

c. Goniometer with Level and Protractor

Combination level and adjustable protractor. Ideal for obtaining measurements that are relative to a hori-

zontal plane. Sold each. From Hosmer.

Item No. ð 51848

d. Goniometer

Clear plastic with black markings. Sold each. From Trulife.

Item No. ð 40049

e. Cobb Scoliosis Ruler

Measures the degree of curvature of the spine on an x-ray. 2-3/8” width. 6-3/4” length. Clear plastic with

black markings. Sold each. From Trulife.

Item No. ð 228001


E Q U I P M E N T8 1 2 Hand Tools

EQ

UIP

ME

NT

MEASURING DEVICES — Continued

a. Transfemoral Length Gauge

Measures in inch and metric. Sold each. From Fillauer.

Item No. ð 220137

b. Transtibial Length Gauge


Item No. ð 220145

c. AP-ML Gauge


Description Item No.ò

Universal Gauge with Level, 17 220336

Original AP-ML Gauge, 22” 220335

d. BK Measuring Calipers

Used for measuring transtibial limbs in the M-L and A-P planes. Sold each. From Trulife.

Item No. ð T095000000

e. Compact Scale

Reads up to 2,000 grams in 1 gram increments. Sleek low profile design. Large high contrast LCD display. Energy

saving auto shut-off feature. Battery or AC powered. Rugged plastic construction. Sold each. From ACME Scale.

Item No. ð CS2000



EQ

UIP

ME

NT

CUTTING TOOLS

f. Scarpas Knife

Two blade sizes. Sold each. From Fillauer.

Blade Size Small Large

Item No. ð 220461 220460

g. Tubing Cutter

I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation. Sold

each. From Grainger and Friddle’s Orthopedic.

Item No. ð 33055

RTC-205-R Replacement Blade

33190 Replacement Wheel

h. Cast Modification Handle

The perfect size—not too big that it’s in the way, and not too small that you can’t hang onto it during ag-

gressive modifications. Easy to use and clean. Reduces blade breakage and is used with flat or half rounds.

Also fits 10” Surform® blades. From Coyote Design.

Color Blue Pink

Item No. ð CD309 CD309P

DISCON Replacement Blades, Flat, 10/Pack

DISCON Replacement Blades, Half Round, 10/Pack

i. Surform® Flat File

Includes regular cut flat blade with edge cut for inside corners. Sold each. From MSC Industrial Supply and

WBC Industries.


Flat File Complete 21-295

21-293 Replacement Blade

j. Surform® Round File

14-1/4” overall length. Round regular cut hardened steel blade is 5/8” in diameter. Sold each. From MSC

Industrial Supply and SPT Technology.


Round File Complete 21-297

21-291 Replacement Blade, Round 21-299 Replacement Blade, Half Round



EQ

UIP

ME

NT

CUTTING TOOLS — Continued

a. Plastic Edging/Deburring Tool

Sold each. From Fillauer and Titan Tool Supply.

Item No. ð 220321

E-100 Replacement Blade

b. Deluxe Plastic Edging Tool

Blade swivels 360°. Hollow handle stores three blades (included). Sold each. From Titan Tool Supply.

Item No. ð GB-E

E-100 Replacement Blade, A

E-200 Replacement Blade, B

E-300 Replacement Blade, C

c. Ceramic Deburring Tool

Great for deburring and shaping edges on AFOs. Features a superior design that will deburr hard plastics

effortlessly without the fear of cutting your hand. Ideal for curved and complicated shapes. Excels on ultra-

hard resins like glass fiber, carbon fiber, and talc filled plastics. Can also be used on soft metals like aluminum,

copper, and brass. Blade requires no resharpening. The blade and handle measure 6.75” and the length of

the blade is 1.5”. Sold each. From WBC Industries.

Item No. ð SC-100DT

d. Stanley® Retractable Utility Knife

Features multi-position blade slide and blade storage in handle. Includes 3 blades. Sold each. From Grainger.

Item No. ð 10-099

e. Stanley® Blade Dispenser

100 blade pack. Sold each. From Grainger.

Item No. ð CDT-100



EQ

UIP

ME

NT

f. Scalpel Handle and Blades

Scalpel handles sold each. Blades sold 100/pkg. From Moore Medical and Dynarex.


Scalpel Handle No. 3 202886

Scalpel Handle No. 4 5020-H4

MooreBrand® Surgical Blades No. 10 No. 11 No. 15 No. 20

Stainless Steel Sterile - 39356AK - 54239

Carbon Steel Sterile - - 37811 -

Carbon Steel Non-Sterile 37810AK 37809 - -

Dynarex Medi-Cut Surgical Blades No. 20 No. 21 No. 22 No. 23

Item No. ð SB-20 SB-21 SB-22 SB-23

g. American Orthopaedic™ Cast Cutter

Specially designed for rugged use. Balance of weight and power helps reduce user fatigue. Internally lubri-

cated for extended life. Hex drive. 10 ft cord with hospital grade plug. 115 VAC, 50-60 Hz, 1.5 amps. Sold

each. From BSN Medical.

Item No. ð 0295-200

h. Dotco Pneumatic Cast Saw

Oscillating saw cuts through fiberglass, plaster and plastic. 0.6 Hp. 2-1/2” blade capacity. 8.9” length. 1/4” air

inlet. 90 psi. Sold each. From California Pneumatic Tool.

Item No. ð 12L2065-90

i. 940 Cast Cutter

A multi-purpose cast removal tool with an ergonomic design that optimizes user control and comfort. Dual

speed cutting to meet varied cast removal needs. Compact design to enhance maneuverability. Sold each.

From Stryker®.

Item No. ð DISCON

DISCON Ion Nitrided Blade, Nonsterile, 1/pkg

DISCON Stainless Steel Blade, Nonsterile, 4/pkg

DISCON Ion Nitrided Blade for Cast Cutter Model 840, 1/pkg

j. Cast Cutter Blade

Universal hub. Sold each. From BSN Medical and Ortho-Care.

Diameter 2” 2-1/2”

Stainless Steel CC1-002 CC1-001

Titanium Coated CC2-0X CC2-5X



EQ

UIP

ME

NT

CUTTING TOOLS — Continued

a. Cast Cutter Blades

Universal hub fits both pin and hex drives. Hardened stainless steel. 4183-110 and 4183-112 sold 6 per pack-

age. All others sold each. From BSN Medical.

Coating Teflon® Titanium Dicronite® None None Nitride

Plaster 3 3 3 3 3

Synthetics 3 3 3

Composites 3 3 3

Plastic 3 3 3

2” 4183-114 N/A N/A 4183-110 0295-219

2-1/2” 31-0265 31-0168 0295-226-BS 4183-112 31-0261

2-1/2” Sectioned N/A N/A N/A 4183-145 N/A

b. Diamond Cast Cutter Blade

Constructed with a layer of diamonds around the diameter of the blade instead of teeth for durability and

fast cutting. Sold each. From Diamond Tool Supply.


2-1/2” with Universal Hub SBUH-25

2-1/2” with Universal Hub, Sectioned SBUH-25-SECT

3” with Round Hub SBSS-30

c. 840 Cast Cutter Blade

Ion nitrided blade for Stryker Cast Cutter Model 840. Sold each. From Stryker.

Item No. ð DISCON

d. Motor Brush

Sold each. From Stryker.

Item No. ð DISCON



EQ

UIP

ME

NT

SCISSORS and SHEARS

e. Tailor’s Points Scissors

Knife edge. Sharp points. Ring bow pattern. Double-plated (chrome over nickel). 5” length. Sold each. By

Gingher from WBC Industries.

Item No. ð 482H-5

f. Utility Shears

Double plated (chrome over nickel). 8” length. Sold each. By Gingher from WBC Industries.


Blunt Points, Knife Edge 9080C-8

Sharp Points, Knife Edge 9480C-8

g. Large Bent Trimmers

Sharp points. Double-plated (chrome over nickel). Easy adjust, flush mount pivot assembly. Sold each. By

Gingher from WBC Industries.

Length 10” 12”

Item No. ð 8500C-10 8500C-12

h. Textile Scissors

Stainless steel ice-tempered blade designed for maximum cutting performance and long life. Botec Cut®

curved blade for easy continuous cutting. Skin friendly soft rubber grip. Sold each. From WBC Industries.

Description 8” Length 9.5” Length 10” Length 10” Length Heavy Duty*

Item No. ð 72020-WB 73224 72025 73225

i. Bandage Scissors

7” length. Stainless steel. Sold each. From AliMed.

Item No. ð 31-704



EQ

UIP

ME

NT

SCISSORS and SHEARS — Continued

a. Lister Bandage Scissors

Extra fine blades. German. 5-½” length. Sold each. From AliMed.

Item No. ð 98SCS1-12

b. Economy Bandage Scissors

Sold each. From Medline Industries.

Length 5-1/4” 7”

Item No. ð 301 302-CG

c. Bandage Scissors

Sold each. From Medline Industries.

Item No. ð 320BK

d. 7-¼” Lister Bandage Scissors

Sold each. From San Fernando Distribution Company.

Item No. ð 1007

e. Sock Removal Scissors

Sold each. From STS.

Item No. ð 1006-ST



EQ

UIP

ME

NT

f. Bandage and Plaster Shears

Stainless steel. Sold each. From UCO International.


Mini Bandage Scissors, 90mm 52/5363-090

Super Mite Serrated Cutter 50/1550-125

Lister Bandage Scissors, 180mm (pictured) 52/3550-180

Plaster Scissors, 220mm 52/5359-220

Plaster Scissors “Excentric”, 190mm 52/5362-190

PUNCHES and RIVETING TOOLS

g. Revolving Punch

Frame made of highly polished forged steel. Cutting tubes are turned from special carbon tool steel and

threaded to allow easy replacement. Sold each. By C.S. Osborne from WBC Industries.


Revolving Punch with 6 Tubes 155 0-7

Replacement Tubes, Set of 6 155T 0-7

Extra Anvil 155-A

Replacement Tube Size 0 Size 1 Size 2 Size 3 Size 5 Size 7

Item No. ð 155T-0 155T-1 155T-2 155T-3 155T-5 155T-7

h. Rivet Setter

Sold each. By C.S. Osborne from WBC Industries.

Size #8 #9 #10

Item No. ð 170-8 170-9 170-10

i. Laurence Standard Rivet Set

6 piece set. Includes wooden case. From Laurence of Oakland.

Item No. ð S150



EQ

UIP

ME

NT

PUNCHES and RIVETING TOOLS — Continued

a. Laurence Deluxe Rivet Set

9 piece set. Includes wooden case. From Laurence of Oakland.

Item No. ð S151

b. ProLine Tools® Rivet Set

Includes four sets (3/32”, 1/8” and 5/32”), two draw (sizes 8 and 12). Nickel-plated low carbon case hardened

steel. Round stand included. Sold set.

Item No. ð PL-600

c. ProLine Tools® Riveting Bar

Heat treated alloy steel riveting bar. 27” length. PL-92102-S houses three removable anvils (one each: convex,

flat and concave).


Riveting Bar PL-92102

Riveting Bar with Removable Anvils (pictured) PL-92102-S

Replacement Anvil Set (one each: convex, flat and concave) PL-92102-A

CONTOURING and BENDING DEVICES

d. Stirrup Bender

Sold each. From Fillauer.

Item No. ð 220038



EQ

UIP

ME

NT

e. Stirrup Bender

Sold each. From Trulife.

Item No. ð T041000000

f. Contouring Irons

Nickel plated bronze. Wide-radius jaws. Will not mar finished metal or leather work. Sold pair. From Fillauer.

Item No. ð 220285

g. Bending Irons

High quality forged steel. Heat treated and plated. Two head thicknesses. Sold pair. From Trulife.

Head Thickness 3/4” 1/2”

Item No. ð 204001 204003

h. ProLine Tools® Bending Irons

Precision machined from high quality steel. One end accommodates material 3/16” or less. The opposite end

accommodates up to 1/4”. Smooth, rounded jaw radius allows proper bends without damage. 3/4” width.

Sold pair.

Item No. ð PL-800

DRILL BITS and ACCESSORIES

i. Drill Bit Set

29 piece set ranges from 1/16” to 1/2”; 13 piece set from 1/16” to 1/4”. From Western Tool Supply.


29 Piece Set DBS-29

13 Piece Set DBS-13



EQ

UIP

ME

NT

DRILL BITS and ACCESSORIES — Continued

a. Drill Bits

Sold each. From Grainger.

Size 1/32” 1/8” 9/64” 5/32” 3/16” 13/64”

Item No. ð DB-132 DB-018 DB-964 DB-532 DB-316 DB-1364

Size 1/4” 23/64” 29/64” 15/32” 31/64”

Item No. ð DB-014 DB-2364 DB-2964 DB-1532 DB-3164

Size #12 #18 #21 #28 #30

Item No. ð DB-12 DB-18 DB-21 DB-28 DB-30

b. Mixing Blade

Made of 304 polished stainless steel. Designed for medium jobs in 1-2 gallon containers. Easily fits any 1/4”

electric chucked power tool. Maximum speed 800 RPMS. Tools with 450-750 RPMS get the best rate of thor-

ough mixing. Can be permanently installed. 30” (762mm) shaft length. Sold each. From Jiffy Mixer.

Item No. ð HS-304-L

c. Reverse Spotfacer and Pilot

Reverse spotfacers are designed for use in restricted areas where conventional spotfacers cannot be utilized.

High speed steel construction. Plain pilot featuring bayonet lock design sold separately. From U.S. Industrial

Tool and Supply.

Diameter 1/4” 5/16” 3/8” 7/16” 1/2” 1/2”

Hole Size 1/8” 3/32” 3/16” 5/32” 5/32” 3/16”

Spotfacer TP491-1/4R TP492-5/16P TP493-3/8T TP494-7/16S TP495-1/2S TP495-1/2T

Use Plain Pilot TP510R TP510P TP510T TP510S TP510S TP510T

HEAT GUNS and ACCESSORIES

d. Master Varitemp® Heat Gun

Lockable variable temperature control allows locked setting from ambient to 1000° F. Powerful, high speed

universal motor. Sturdy die cast housing. Adjustable non-slip stand. Weight 3.8 lb. 120 V. Sold each. From

Master Appliance.

Item No. ð 10298



EQ

UIP

ME

NT

e. Master Heat Gun

High temperature and power ratings. Air flow 23 CFM at 3,000 FPM. Sturdy die cast housing. Adjustable

non-slip stand. Weight 3.7 lb. 120 V. Sold each. From Master Appliance.


Model HG-501A, 500° to 750° F 10104-MA

Model HG-751B, 750° to 1,000° F 10109

HAS-011K Replacement Element for HG-501A

HAS-043K Replacement Element for HG-751B

51309 Pinpoint Attachment, 1/4”

f. UltraHeat™ Heat Gun

Dual temperature or variable temperature. Sold each. From Steinel.


Model SV-800, Dual Temperature, 600° and 900° F 34100

Model SV-803, Variable Temperature to 1,000° F 34103

07062 Reducer Nozzle, 9mm



07011 Spreader Nozzle, 50mm (2”)

g. Three-Stage Professional Heat Gun

Multi-purpose heat gun with cool air stage and choice of two temperature settings for convenient hand-held

or benchwork. Steinel’s exclusive DuraTherm™ heating element ensures long life and even heat. Accepts a

full range of nozzles and accessories. Sold each. From Steinel.

Item No. ð 34820

h. Variable Temperature Electronic Heat Gun

Powerful heat gun with variable temperature and electronic thermocouple control for flexible use and maxi-

mum reliability. Steinel’s exclusive DuraTherm™ heating element ensures long life and even heat. Accepts a

full range of nozzles and accessories. Sold each. From Steinel.

Item No. ð 34830



EQ

UIP

ME

NT

MISCELLANEOUS HAND TOOLS

a. PVA Sealing Iron

Teflon® covered shoe for sealing polyethylene and other plastic film. Accurately balanced. Durable construc-

tion. Thermostatic heat setting control 175° F to 550° F. 110V. 150W. Sold each. From Clamco.


PVA Sealing Iron 50-T

1-122 Replacement Teflon® Boot

1-125 Replacement Metal Clip and Teflon® Boot (Set)

b. Yates Clamp

Three sizes. Sold each. From Monogram Aerospace Fasteners.

Length 3-1/4” 3-3/4” 4-3/4”

Item No. ð W-01 W-02 W-03

c. Cast Spreader

High quality stainless steel construction with spring-loaded handle for one hand operation. Sold each. From

Moore Medical.


Cast Spreader, 3-Prong 68178

Cast Spreader, 4-Prong 0082-000-000

d. Spatula Mixing Knife

Sold each. From PEL Supply Company

Item No. ð S2494

e. Balldriver Screwdriver

4mm. Sold each. From WBC Industries.

Item No. ð 10660



EQ

UIP

ME

NT

f. Balldriver T-Handle

4mm. Sold each. From WBC Industries.

Item No. ð 13160

g. T-Handle Hex Wrench

4mm. 6” length. Sold each. From WBC Industries.

Item No. ð 15260

h. Corking Tool

Used to install all catches on knee joints. Sold each. From Becker Orthopedic.

Description 1/8” 3/16”

Corking Tool T-18 T-16

BCB-18 Ball Bearing, 1/8”

BCB-316 Ball Bearing, 3/16”

BCS-18 Spring, 1/8”

BCS-316 Spring, 3/16”

i. Staple Gun and Staples

Staple gun sold each. Staples sold 4-pack (5,000 quantity). From Western Tool Supply.


Staple Gun T-50-GUN

Staple Size 1/4” 5/16” 3/8” 1/2” 9/16”

Item No. ð T-50-14 T-50-516 T-50-38 T-50-12 T-50-916


E Q U I P M E N T8 2 6 Alignment and Fitting Aids

EQ

UIP

ME

NT

ALIGNMENT and FITTING AIDS

a. Universal Alignment Fixture

Sold each. From Fillauer.

Item No. ð 220128

b. Joint Alignment Tool

Used to assist in aligning joints of bent stirrup. 1/4” diameter. 8” length. Sold each. From Fillauer.

Item No. ð 220020

c. Vertical Fabrication Jig (VFJ-100)

Vertical orientation allows continuous alignment during all phases of duplication and fabrication process.

Sold each. From Hosmer.

Item No. ð 52056

52057 Post Assembly 52075 Bolt 55992 Mandrel Bushing

52106 Collar Assembly 52076 Plate 52103 Mandrel Bushing

52086 Screw Assembly 51674 Bolt 72334 Cord

52084 Center Screw Assembly 52071 Ankle Bracket Assy 52109 Plumb Bob

52079 Thumb Screw Set 52082 Yoke Assembly 52108 Plumb Bob Support

50270 Washer 52088 Socket Clamp Assy 52062 Clamp Assembly

VFJ-107 Mandrel Bushing

d. ProLine Tools® Prosthetic Fitting Stool

Main support ratchets by one-inch increments to accommodate different leg lengths. Overall height ranges

from 11” to 26”. Solid, tread-covered platform can be adjusted up or down for a perfect fit and locked into

position. Non-skid feet provide stability. Supports up to 350 lb. Sold each.

Item No. ð PL-STOOL

E Q U I P M E N T Vices 8 2 7


EQ

UIP

ME

NT

VICES

e. Pipe Holding Fixture

Adjustable. Sold each. From Fillauer.

Description Item No.ò Vice Mount Model (pictured) 220129

Bench Mount Model 220131

f. Prosthetic Bench Vice

Opens to 16” with an 8” depth. Swivel jaw. Replacement pads available. Sold each. From Fillauer.

Item No. ð 220178

g. ProLine Tools® Prosthetic Vice

Concentric clamp adapts to any diameter pipe. Zinc plated, yellow chromate low carbon steel. Sold each.

From Wagman Manufacturing.

Description Item No.ò Vice Mount Model PL-T04

Bench Mount Model PL-T04B


E Q U I P M E N T8 2 8 Router and Sanding

EQ

UIP

ME

NT

ROUTER and SANDING

a. ProLine Tools® Portable Router

Easily repositionable at only 28 lb, the PL-500 bridges the gap between stationary and portable router equip-

ment. The 1/3 Hp motor with lifetime-lubricated ball bearings is completely enclosed to keep mechanical noise

to a minimum. The adjustable head can be positioned at any angle or height for a variety of tasks. Welded

base is pre-drilled for easy table mounting. 7 ft power cord. 110/115 V. Sold each.

Item No. ð PL-500

PL-100-CBD ProLine Router Circuit Board Drive

b. Router Foot Switch

Sold each. From Grainger.

Item No. ð SR-200E-FS

c. Dust Collector Attachment

Infinitely adjustable. Steel construction. 4” exhaust for connection to vacuum system. Appropriate for floor

carvers. Sold each. By Trautman from Fillauer.

Item No. ð 2100L

d. Angled Accessory Holder Attachment

Keeps your accessories organized and visible. Appropriate for floor carvers. Sold each. By Trautman from

Fillauer.

Item No. ð 2100M

E Q U I P M E N T Router and Sanding 8 2 9


EQ

UIP

ME

NT

e. ProLine Tools® Router Adapter

Attaches to standard 1/2-13 thread and provides a 5/8-11 thread at opposite end. Overall length 2-7/8”. Alu-

minum construction. Sold each. From Wagman Manufacturing.

Item No. ð PL-1109

f. Pneumatic Sanding Drum

Standard 1/2-13 thread. 3-1/2” diameter. 5-1/4” length. Sold each. From Qualis International.

Item No. ð 594000

594002-NS Replacement Bladder for 594000 New Style

594002-OS Replacement Bladder for 594000 Old Style

g. Sanding Sleeve for Pneumatic Sanding Drum

Sleeves fit Pneumatic Sanding Drum above. Sold each. From Qualis International.

Description 120 Grit 80 Grit 60 Grit 24 Grit

Item No. ð 5940120 594080 594060 594024

h. Garalun Drum

6-1/2” face. 6” LD x 5-5/8” SD. Sold each. From Saint Gobain Abrasives.

Description 150 Grit 24 Grit

Item No. ð 95761 95813

i. Tapered Sand Drum Sleeve

Fits the 5001 Trautman Arbor. Sold each. By Trautman from Fillauer.

Description 240 Grit 180 Grit 120 Grit 50 Grit 24 Grit

Item No. ð S240 S180 S120 S50 S24



EQ

UIP

ME

NT

ROUTER and SANDING — Continued

a. Sand-Rite Jacket

Sold each. From Sand-Rite.

Size 2” x 8” 3” x 7” 4” x 9” 6” x 7” 6” x 9” 8” x 9”

Item No. ð SRJ-28 SRJ-37 SRJ-49 SRJ-67 SRJ-69 SRJ-89

b. Sutton Abrasive

Sold each. From DJ Distributors.


Item No. ð B45980 B45960 B45940 B45924

c. Sanding Belt

4” x 59”. Sold case/10. From Shoe Systems Plus.

Description 40 Grit 24 Grit

Item No. ð BZ45940 BZ45924

d. Rubber Sand Core and Sleeves

Standard 1/2-13 thread. Sold each. See next page for sanding cones. By Trautman from Fillauer.

Size X-Small Small Large

Top Diameter .75” 1.062” 1.437”

Bottom Diameter 1.25” 1.937” 1.937”

Length 4.125” 4.125” 4.125”

Rubber Sand Core RAXS RAS RAL

Sanding Sleeve X-Small Small Large

180 Grit RAXS-180 N/A N/A


80 Grit N/A RAS-080 RAL-080


36 Grit N/A RAS-036 RAL-036

Finishing Cone X-Small Small Large

Fine (Blue) RAXS-F RAS-F RAL-F

Medium (Red) RAXS-M RAS-M RAL-M

Coarse (Brown) RAXS-C RAS-C RAL-C



EQ

UIP

ME

NT

e. Trautman Sand Cone

For rubber sand cores. Sold each. By Trautman from Fillauer.

Description 120 Grit 80 Grit 24 Grit

For Small Size Core (2100D) D120 D80 D24

For Medium Size Core (2100C) C120 C80 C24

f. Felt Arbor

May be shaped to any contour. Used for polishing edges of plastic laminate. Sold each. By Trautman from

Fillauer.

Dimensions 3” x 4” 2-1/2” x 4” 2” x 3” 2-1/2” x 4” 2” x 3”

Thread 1/2” 1/2” 1/2” 5/8” 5/8”

Item No. ð 225062 225064 225066 225086 225094

g. Tapered Felt Arbor/Core

For use with Fillauer sand cones. Used for polishing plastic edges. Sold each. By Trautman from Fillauer.

Dimensions 2”x 4” 1-1/2” x 4” 1” x 4” 2” x 4” 1-1/2” x 4”

Thread 1/2” 1/2” 1/2” 5/8” 5/8”

Item No. ð 225068 225070 225072 225128 225177

h. Sand Cones for Tapered Felt Arbor/Core

For use with Tapered Felt Arbor/Core above. Sold dozen. By Trautman from Fillauer.

Description 80 Grit 120 Grit 36 Grit 100 Grit 120 Grit 36 Grit 80 Grit

Dimensions 1” x 4” 1” x 4” 1-1/2” x 4” 1-1/2” x 4” 1-1/2” x 4” 2” x 4” 2” x 4”

Item No. ð 225173 225175 225151 225169 225171 225136 225141

i. Diamond Sanding Cone

Fine, coarse and dual in 30mm, 35mm and 50mm diameter at threaded end. Standard 1/2-13 thread. Sold

each. From Diamond Tool Supply.

Grit Fine Course Dual

30mm Diameter (X-Small) CONE-30-F CONE-30-C CONE-30-D

35mm Diameter (Small) CONE-35-F CONE-35-C CONE-35-D

50mm Diameter (Large) CONE-50-F CONE-50-C CONE-50-D



EQ

UIP

ME

NT


a. Rubber Arbor 749

Slip-on type fits router shaft. Includes one 80 grit sanding sleeve. 7-3/4” length. 3” diameter. Sold each. From

Friddle’s Orthopedic.

Item No. ð RA-749

Sanding Sleeve 100 Grit 80 Grit 60 Grit 40 Grit 24 Grit

Item No. ð RA-749-100 RA-749-080 RA-749-060 RA-749-040 RA-749-024

b. Garalun Cone

4” face. Sold each. From Saint Gobain Abrasives.


1-11/32” LD x 1-1/16” SD N/A 99864 99863 99862

1-15/16” LD x 1-3/8” SD 98098 N/A 95742 99865

c. Sanding Sleeve

Sold each. From Sand-Rite.

Dimensions 150 Grit 120 Grit 100 Grit 80 Grit

3” x 7” SRSS-3X7-150 SRSS-3X7-120 SRSS-3X7-100 SRSS-3X7-080






Dimensions 60 Grit 40 Grit 36 Grit 24 Grit







d. 3M™ Sanding Screen

Strong synthetic fibers provide durable, uniform, open screen construction for low loading. Silicon carbide

mineral for effective abrasive performance. Sheet size 9” x 11”. Sold sheet. From 3M Company.

Description 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit

Item No. ð 3MSS-220 3MSS-180 3MSS-150 3MSS-120 3MSS-100 3MSS-080



EQ

UIP

ME

NT

e. Tycro Polishing Arbor

Tycro polishing arbor is double ended with 5/8” thread one end, 1/2” thread opposite end. 3” diameter. 3-1/2”

length. Sold each. By Trautman from Fillauer.

Item No. ð 225110

f. Tycro Cone

Sold each. From Friddle’s Orthopedic.

Description 1” X 4” 2” X 4”

Item No. ð TC1X4 TC2X4

g. Tycro Wheel with Glass

2” x 2-1/2”. Use with Tycro Converter Seat below. Sold each. From UCO International.

Item No. ð 52/6658-606

h. Mini Sander Attachment

Standard 1/2-13 thread. Includes 6 sanding sleeves. Replacement sanding sleeves available. Sold each. From

B&G Rehab.


Mini Sander Attachment, Complete 1111-BR

1111-F Sanding Sleeve, Fine, 6/Pkg

1111-C Sanding Sleeve, Coarse, 6/Pkg

i. Mini Tycro Buffer Attachment

Standard 1/2-13 thread. Replacement buffer available. Sold each. From B&G Rehab.


Mini Tycro Buffer Attachment 1108

1108-RTB Replacement Tycro Buffer Head



EQ

UIP

ME

NT


a. Mini Rasp Attachment

Standard 1/2-13 thread. Sold each. From B&G Rehab.

Item No. ð 1110-BI

b. Mini Arbor Adapter

Standard 1/2-13 thread. Sold each. From B&G Rehab.

Item No. ð 1108-A

c. ProLine Tools® Tycro Cone Adapter

Standard 1/2-13 thread. Sold each. From Wagman Manufacturing.

Item No. ð PL-1138

d. Tycro Converter Seat

Converts Tycro thread to standard 1/2-13. Sold each. From UCO International.

Item No. ð 52/6662-003

e. Diamond Rasp

Constructed with a surface layer of diamonds instead of teeth, diamond rasps are available in fine and coarse

grits. Standard 1/2-13 thread fits most router equipment. Sold each. From Diamond Tool Supply.

Grit Fine Coarse

Item No. ð RASP-PA-FINE RASP-PA-COARSE



EQ

UIP

ME

NT

f. Grinding Rasp

Sharp, high quality steel. Standard 1/2” thread. Does not require adapter. Sold each. By Trautman from Fillauer.

Item No. ð 2100E

g. Grinding Rasp

Sharp, high quality steel. 5/8” thread requires router adapter. Sold each. By Trautman from Fillauer.

Description Dimensions Item No.ò

For use on transtibial sockets 1-1/2” x 2-1/4” 225052

For small diameter and channel work 1-3/8” x 3-3/8” 225045

With extra fine teeth for plastic 1-3/8” x 2-1/8” 225060

For general transfemoral socket work 1-3/4” x 3-1/8” 225037*

*Not pictured.

h. Coneiak Polishing Arbor

Sold each or in a set with one each with handsome storage case. 1/2–13 thread. By Trautman from Fillauer.

Style Ball Nose Tapered Grooved Slim 4 Set w/Case

Color Orange Red Gray Blue Mixed

Item No. ð 225400 225410 225420 225440 225490

i. Polishing Cone

For rubber sand cores. Sold each. By Trautman from Fillauer.

Grit Fine Medium Coarse

Color Blue Maroon Brown

For Mini Size Core (2100P) 225117 225118 225119

For Small Size Core (2100D) 225111 225112 225113

For Medium Size Core (2100C) 225114 225115 225116

j. FOA Polishing Cone

Fine grit, blue color. Sold each. From Friddle’s Orthopedic.

Size 1” x 4” 1-1/2” x 4” 2” x 4”

Item No. ð 25000 25001 25002



EQ

UIP

ME

NT


a. Soft Foam Shaper

Ideal for contouring both inner and outer areas of the foam cover. Fine steel bristles barely protrude through

the surface of the plastic allowing foam to be shaped smoothly and evenly. Measures 2-3/4” x 5”. Sold each.

From Hosmer.

Item No. ð 51391

b. ProLine Tools® Foam Finisher

Attaches to standard 1/2-13 thread for a smooth finish without grabbing. Sold each. From Wagman Manu-

facturing.

Item No. ð PL-100

E Q U I P M E N T Vacuum Equipment 8 3 7


EQ

UIP

ME

NT

VACUUM EQUIPMENT

c. Portable Vacuum

Features a permanently lubricated 1/4 Hp motor with enough power to operate two vacuum laminating jigs

simultaneously. 4 cubic feet per minute capacity. Adjustable vacuum from 3” to 27” of mercury. Standard

110/115 volt 50/60 Hz single phase. Includes gauge, regulator, filter, hoses and overflow traps. From Hosmer.

Item No. ð 51277

56161 Cord 54091 Intake Filter Jar Only 51273 Tubing

51276 Klemm Filter 56182 Intake Filter Only 54662 Siphon Oiler

54663 Tee 55124 Bushing 56189 Siphon Oiler Jar Only

53963 Bleeder Valve 55125 Pipe Tee 51272 Close Nipple

55603 Close Nipple 51268 Street Elbow 56159 Front Support

54093 Intake Filter Assembly 51271 Hose Connector 54724 Oil

d. Vacuum Laminating Jig

May be positioned to hold cast at any angle or degree of rotation. Large PVA tie-off ring and hose attach-

ment for inside and outside vacuum lines make laminating easier and faster. From Hosmer.

Item No. ð 51454

51459 Vacuum Device Assy 51455 Laminating Assembly 51456 Pipe Lock

51462 Clamp Assembly 51271 Hose Connector 51273 1/4” Hose, 6’ Length

51463 Post Base Assembly 51458 Stopper 55706 Lamination Mandrel

52062 Clamp Assembly 51457 Plug 51275 3/16” Tie-Off Hose

e. Supreme Vacuum Press

Features a unique perimeter air flow that allows a more even distribution of pressure, locking handle, quick-

release bladder frame and built-in pressure relief valve to protect pump. Oversized (10” x 17”) or Supersized

(17” x 18”) work area with 3” pan depth. Sold each. From Shoe Systems Plus.

Style Single Dual

Inside Dimensions 10” W x 17” L 17” W x 18” W

Outside Dimensions 16.5” W x 25” L 23.5” W x 26” L

Weight 32 lb 41 lb

Item No. ð SVP1017 SVP1718

Replacement Bladder SVP-RB1017 SVP-RB1718


E Q U I P M E N T8 3 8 Ovens

EQ

UIP

ME

NT

OVENS

a. PDQ BT-1

Intended for flat plastics only, the BT-1 incorporates all the infrared efficiency of the full size PDQ ovens in a

smaller, more versatile size. Aluminum and stainless steel construction. Four 650 watt infrared emitters. Other

features include interior light, double pane viewing window, programmable digital temperature control and

tray with a fitted Teflon® cover. 1 year warranty. From OTS Corporation.

Specifications

Footprint: 43”D x 42”W Height: 20” (44” with legs) Interior Dimensions: 30”D, 38”W, 6”H Uncrated Weight: 150 lb Electrical: 220V/20A/Single Phase Heat Source: (4) 650 watt emitters

Item No. ð O BT1

OR MIS LATCH Replacement Latch

b. PDQ PO-2

PDQ’s top-of-the-line infrared oven features banks of lights above and below for the quickest and most even

heating of either sheet plastic or thick bubble forming plastic. Caster-mounted tray can be rolled to your

vacuum area. Aluminum and stainless steel construction. Four 1,000 watt infrared emitters on top and bottom.

Other features include interior light, two double pane viewing window, programmable digital temperature

control and a fitted Teflon® sheet for tray. 1 year warranty. From OTS Corporation.

Specifications

Footprint: 60”D x 40”W Height: 53” Interior Dimensions: 36”D, 50”W, 20”H Electrical: 220V/50A/Single Phase Heat Source: 16-650 watt quartz infrared tubes Interior Lighting: (8) 1,000 watt bulbs

Item No. ð O PO2

c. PDQ BT-4

The BT-4 is capable of bubble forming and heating sheet plastic while taking up a minimal amount of floor

space. It is big enough to heat most KAFO sheet plastics and has enough drop for even the biggest check

socket. The BT-4 has the same speed and reliability as other PDQ Infrared Ovens. The eight 1000 watt emit-

ters—four on top and four on bottom—along with the dual electric fans allow bubble forming plastics to be

heated evenly and efficiently. It is truly the best of both worlds with its small size and large capacity. Other

features include programmable digital temperature controller, 4 interior lights and large viewing window,

access point for vacuum line, sheet-plastic tray with fitted Teflon® cover and 18” clearance for bubble form-

ing. Aluminum and stainless steel construction. 1 year warranty. From OTS Corporation..

Specifications

Footprint: 49”D x 32”W Height: 61” Interior Dimensions: 40”D, 27”W, 24”H Electrical: 220V/50A/Single Phase Interior Lighting: (8) 1,000 watt bulbs

Item No. ð O BT4

E Q U I P M E N T Ovens 8 3 9


EQ

UIP

ME

NT

d. PDQ Rollabout

An excellent solution for heating large sheets of plastic for hip spicas, AFOs or check sockets. Four sizes, each

features a hydraulic assisted height adjustable tray for easy operation. The tray includes a fitted Teflon® cover,

is mounted on casters, and can be rolled to your vacuum area. Aluminum and stainless steel construction.

650 watt infrared emitters (1,000 watt on 8E). Features include interior light, double pane viewing window,

programmable digital temperature control. 1 year warranty. From OTS Corporation.

Exterior Dimensions (48”H) 49”W x 35”D 47”W x 55”D 59”W x 55”D 70”W x 52”D

Interior Dimensions (18”H) 38”W x 31”D 36”W x 51”D 48”W x 51”D 60”W x 48”D

Item No. ð O 5A O 6B O 7C O 8E

OR TEFLON 5A Teflon Sheeting for 5A Rollabout

OR TEFLON 6B Teflon Sheeting for 6B Rollabout

OR TEFLON 7C Teflon Sheeting for 7C Rollabout

OR TEFLON 8E Teflon Sheeting for 8E Rollabout

e. PDQ Rollabout 8D

Designed for the high-volume facility, the convertible double tray Rollabout 8D model features two separate

height adjustable trays that can be connected together to create one area measuring 80” wide and 50” deep.

The bottom of the oven consists of two trays with fitted Teflon® covers. These trays can be connected together

and covered with one large tray (included). Aluminum and stainless steel construction. Caster rollers. 1 year

warranty. From OTS Corporation.

Specifications

Footprint: 54”D x 92”W Height: 48” with legs Interior Dimensions: 50”D, 80”W, 18”H Electrical: 220V/20A/Single Phase Heat Source: (4) 1,000 watt emitters

Item No. ð O 8D-2


8 4 0

This page intentionally left blank.

8 4 1


This page intentionally left blank.


8 4 2

tools equipment section

Documents