tools / equipment / machinery · 2020. 1. 28. · having vast circulation for healthy open...

GOVERNMENT OF THE PUNJAB OFFICE OF THE DISTRICT MANAGER (TEVTA)

SARGODHA & KHUSHAB Govt. Technical Training Institute 47 N.B Sargodha.

Phone # 048-3224255, 3223678 www.tevta.gop.pk E.mail: [email protected]

No.GTTI/47NB/SGD/--------------- DATED------/----/2020

BIDDING/TENDER DOCUMENTS

TOOLS / EQUIPMENT / MACHINERY INVITATION TO BID

As per rule -12(2) of Punjab procurement Rule 2014. The Bid / Tenders are floated in Newspaper

having vast circulation for healthy open competition, through Express, (Urdu), Dawat e Amal (urdu)

and the daily time (English). Last date of receiving Tenders /Bids is fixed, on 19 February, 2020 By

11: 00 noon and will be opened on the same day at 11.30 A.m. In addition to print media, this

procurement opportunity has also been advertised on TEVTA, website: www.tevta.gop.pk & PPRA

website www.ppra.punjab.gov.pk

INSTRUCTION TO BIDDER

1. The supplier / firm must be registered with sales tax department and should indicate their NTN and GST No. in the form of Bid as under:-

2. The suppliers / Firms must provide copies of their GST and NTN registration / certificate Documents.

3. Photocopies of Authorized Person CNIC.

FORM OF BID

Name of Firm: ___________________________________________________

___________________________________________________

NTN No. _______________________________________________ (Please attach copy)

GST No. _______________________________________________ (Please attach copy)

Phone No.________________________________Mobile. _______________________

Name of Authorized Person: ________________________________________________

CNIC No. __________________________________(Please attach copy of CNIC)

Earnest Money CDR No._______________________date.________________/2020.

Amount. ________________Name of bank ___________________city_______________

GOVERNMENT OF PUNJAB

TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY

GOVT. TECHNICAL TRAINING INSTITUTE

47 NB SARGODHA

www.tevta.gop.pk E-Mail: [email protected]

Phone # 048-3255563, 0300-6014643

http://www.ppra.punjab.gov.pk/

http://www.tevta.gop.pk/

mailto:[email protected]

GENERAL / SPECIAL TERMS AND CONDITIONS / DELIVERY TIME / BID

EVALUATION CRITERIA AND DETAILS OF STANDARD ELIGIBILITY.

1. Firms should not be a black listed, suspended or removed from the approved list of contractors of any Deptt. /Agency.

2. The rates quoted in the Tender should be valid up to 90 days from the date of opening of tenders.

3. Items must be supplied within 45 days period from the date of placement of order. Extension in delivery time may be granted in deserving cases.

4. Number of any item can be decreased or increased at any stage. 5. All the prevailing Govt. Taxes are to be paid by the firms /contractors as per policy/rules of

the Govt. Transportation and installation charges and also installation charges of all machinery / equipment would be carried by the firm/ contractor, therefore, the rates should be quoted inclusive of all taxes, installation charges as well as transportation/Freight charges.

6. In case of any dispute, decision of purchase Committee of this office would be the final. 7. Tenders will be opened in the presence of purchase committee and contractors or their

representative who wish to be there. 8. Payment will be made after the delivery, final inspection, installation and successful working

of all the machinery /equipment. Partial payment will also be allowed after the delivery, final inspection, installation and successful machinery /equipment partially supplied, on the request of supplier.

9. Relevant original literature, manuals, shall be supplied along with the machinery /equipment. (Where necessary / applicable).

10. All machinery / equipment supplied must be in original form / packing. 11. Incomplete, offer received after notified date and time will not be entertained. 12. Rates should be quoted both in figures and words. 13. Rates should be quoted on the basis of free delivery at consignee’s end in safe, sound and in

operational condition, i.e. Govt. Technical Training Institute 47 NB Sargodha. 14. The equipment should not be of poor quality / substandard. 15. The equipment/machinery should be in close conformity with the specifications given in the

tender documents. 16. The purchase Committee reserves the right to purchase full or part of the store. 17. Purchase / Technical Committee will make 100% inspection of the equipment after supply

before payment. 18. Purchase Committee reserves the right to reject all of the tenders before the acceptance. 19. All tenders shall accompany the earnest money equal to 2% of the Estimated Price in the

shape of CDR/DD/PO/ Banker’s cheque in the name of Govt. Technical Training Institute 47 NB Sargodha without which the offer will not be entertained.

20. Performance security @ 10% of total amount of the supplied items will be deducted at source at the time of payment or provided in shape of DD/PO/CDR/Banker’s Cheque at the time of issuance of supply order and will be returned after one year of supply of equipment subject to the successful execution of contract and satisfactory installation, working /maintenance of all the machinery equipment.

21. In case the firm / contractor fails to execute the contract strictly in accordance with the terms and condition laid down in the contract, the security deposited by him shall be forfeited and the machinery / equipment will be purchased / maintained at his risk and cost and the firm shall be black listed in addition to any other penalty and liquidated damages and not by way of penalty, a sum of up to 10% of the price of any stores which the contractor has failed to deliver as aforesaid for each month or part of month during which the delivery of such stores may be in arrears.

A-2 PERFORMANCE CRITERIA / WARRANTY /MAINTENANCE. 22. All machinery /equipment shall carry warranty of parts and labour at site for a period of at

least one year from the date of final payment. 23. Supplier will be responsible for successful installation and working of all the machinery /

equipment for a period of one year and any problem in equipment / machinery etc. will be removed by the supplier / firm free of cost including replacement of parts etc. if any.

24. Technical experts of the firm / contractor will visit this Institute on emergency call as and when required for the warranty period of one year in addition to any emergency call.

25. Technical evaluation performance will be on the basis of product quality, lowest and

practical lab requirement of the institute.

26. The contractor will be bound to abide by all rules & regulations / instructions / directions issued by the Federal / Punjab Governments / Purchase Committee in addition to above mentioned conditions.

27. In case of any query or information contact on telephone No: 048-3255563, 0300-6014643

CERTIFICATE

A. We undertake that our Firm M/S_____________________________ is not black listed by

any Government Department / Agency in any part of Pakistan.

B. We have read all terms & conditions and undertake to abide by all Terms & Conditions

mentioned in this Tender Document.

Name of Representative of the Firm Signature Date:

Sr.

No.Name & Specification of the Item Qty

Unit Price

Excluding GSTGST @17%

Price Per

Unit Including

GST

Total Cost

Including GST

Welder

Tools Item

1Acetone Acetone 4N 1090 Ley Court Farm 5 Liters

4N 1090 Ley Court Farm 5 Liters10 Nos.

2

Adjustable Wrench 8',10",12" (Each) Max Power

High Tensile Ductile Handle (Heavy Duty)

Length= 8 , 10 and 12 Inch

Chrome Vanadium steel High Qulity & Corrosion resistant

10 Nos.

3Allen Key Set 9 Pieces 0.5 mm to 12 mm Chrome Vanadium

0.5 mm to 12 mm Chrome vanadium steel High Quality10 set

4Anti Spatter Spray 400ml Binzel German

400ml for MIG/MAG10 Nos.

5

Anvil 60kg

Wieght 60 Kg

Horn Type single side

High Carbon Steel(Casted)

grade- 1055

surface hardness rating- HRC 58

Dimension -Length- 555 mm,

Base width- 230 mm,

Hieght- 240mm,

Face width 100 mm

2 Nos.

6Blower Gif-2 335watt 13000RPM 1.6Amp/ (Blower 800 E is available)

800W , No. load speed 16000RPM , Volumetric flow rate = 4.5m3 5 Nos.

7

Chipping Hammer 10”*4”

Chipping Hammer 4”*10”

Hardened, tempered & tough and chisel edge, wooden or PVC handle

Double End (PIN & Straight Peen)

10 Nos.

8

Combination Plier 8"

High leverage combination pliers

Chrome vanadium steel

Drop forged & heat treated

Induction hardened cutting edges

Serrated gripping surfaces 8" Inch

10 Nos.

9

Different File set 8,10,12 Inch (each) with Plastic or wooden Handle

8,10,12 inch (High Carbon steel (Hardened & Tempered

with plastic or wooden Handle) Grade-I

5 set

10Digital Multi-Meter Taiwan 500volt Ac, Dc 1000, 20 Mega Oham (Sets)

500 volt Ac, Dc 1000V ,20 mega oham (Sets)5 set

11Dungaree Large Size

Standard Size (Large)40 Nos.

12Dusters Stander Size Pakistan

White Board duster0 Nos.

13Ear Plug Standard Size

Standard Size (10-12 mm)40 Nos.

14Electrodes E 7018 Kiswel 12No,10No,08No

E 7018 12No, 10No ,08No (20Kg Pack Each)20 Pkt

15Exhaust fans 16 inch

Size 16 inch1 No.

16Filler Rod/ AWS Wire Er 70s-3 (kg)

AWS Er 70s-3 for TIG Welding6 Kg

17

Fire Blankets Fiber Glass 4ft * 6ft

Thickness 0.030 in weight 3.23 Ib color Brown

Fiber glass 4ft * 6ft

Thickness 0.030 inch

weight 3.23 Ib color Brown

100% polyester plush (all can customized):

Soft Velboa: 1.5mm, 2.5mm long fur; weight 280g - 400g per yard

PV Fleece: 7mm, 10mm, 12mm, 15mm, 18mm long fur; weight 380g - 550g per yard

Fur: 8mm - 110mm; weight 400g per yard

10 Nos.

18Fire Extinguisher Dry Powder 6Kg

(DCP , CO2, Foam) weight = 6kg10 Nos.

19

Hammers 1kg to 5kg Set

Hammer (Cross Peen) With Handle

High Carbon Steel Hardend & Tempered Head Forged From High Carbon Tested Steel

Head Induction Hardened & Tempered

Fitted With Seasoned Wooden Handled

10 set

List ofTools / Equipment / Machinery

GOVT. TECHNICAL TRAINING INSTITUTE 47 NB SARGODHA

1

Sr.


Unit Price


Price Per

Unit Including

GST

Total Cost

Including GST

Welder

20Leather apron

Material leather, large size48 Nos.

21Lighting System Energy Saver 45 watt

Energy saver 45 watt3 Nos.

22Liquid Cleaner

Stain remover (400 ML)24 Nos.

23Luster Drummond Metal Luster weight 18-0 Itom DL 6220K12 Brand Drummond

Drummond™ Metal Luster Metal Cleaner and Polish Weight 18-0 Item DL 6220K12 10 Nos.

24

Measuring Tools Lever Lock Stenley

Measuring Tape Lever Lock (5 Meters)

A corrosion-resistant lacquered blade 3-rivet blade hook Item Dimensions 8.99 x 4.5 x 14.5 cm Item

Weight 200 grams

5 Nos.

25Mig Plier 8 inch

Carbon Steel and Chrome Vanadium Steel 8 inch Handle PVC or Plastic coating grips10 Nos.

26

Open and Ring Spanner 12pes , 8mm to 24mm Chrome Vanadium (Set)

Combination wrench set 12 pieces

Drop forged, heat treated, chrome plated Precision machined box and open end Size: 8, 10, 11, 12, 13,

14, 15, 16, 17, 19, 22, 24

Material: Chrome Vanadium Includes roll up pouch for storage.

3 set

27

Safety Belt Model no R-502-N Body Belt Nylon

50mm weight 1.39kg color orange brown

Safety belt Model noR-502 N Body belt Nylon 50mm weight 1.39kg

color orange brown

40 Nos.

28

Safety gloves

Standard size , Heat resistant cowhide leather gloves. Adapted for MIG, TIG, Arc, foundry and Argon

welding.

30 Nos.

29

Safety Goggles Stander Size Pak

Standard size , High Quality

Frame Material: Plastic

Lens Thickness (mm): 2.5 mm

30 Nos.

30

Safety Shoes 8,9,10 NO Pak

Pure Leather with Heat And acid Resistance, Slip Proof

With Biult in Metal Safety ,Standard size 8, 9 and 10 Nos.

48 Nos.

31

Screw Driver Set 7 pcs

• Cushion Grip 2 Screwdriver

7 Piece Set

Phillips #0 x 60mm

Phillips #1 x 100mm

Phillips #2 x 45mm

Phillips #2 x 150mm

Slotted 3mm x 75mm

Slotted 5mm x 100mm

Slotted 6.5mm x 45mm

• Blade: chrome-vanadium-molybdenum steel, entirely hardened and tempered.

• Blade chrome plated,

blacken tip.

5 set

32

Socket Set 52 Pieces

Socket Set 52 pcs Chrome vanadium High Quality

Item Weight 4.45 pounds

Package Dimensions 16.1 x 7.8 x 1.9 inches

52 Piece Socket Set

Finish Chrome Plated

Material Tempered High Carbon Steel and CRV Steel

5 set

33

Star Set 7 Pieces Changeable Screw Driver

Pieces in set = 7 special chrome-vanadium-molybdenum tool steel hrough hardened for best wear

resistance

Precision machined exact fit black tips

1000 volt certified, 10,000 volt tested. Slotted sizes: 3.0, 4.0, 5.5, 6.5mm

Phillips sizes: #1 #2

5 set

34

Temple Sticks Tempindic 200 C

Tempindic 200 C

Temperature Indicator Temperature range 40 Deg C to 1200 Deg C

Calibrated at +/-1% Accuracy

Lead and Sulfur free

100 Nos.

35

Tip Cleaner Different Wire Size

Different wire size for 0 to 9 No tip standard size

Tip Cleaner Combo Set provides the two most common size for tip cleaning, 5” (130mm) and 3” (75mm).

Wires are made from quality stainless Steel and enclosed in a sturdy aluminum casing.

9 Nos.

2

Sr.


Unit Price


Price Per

Unit Including

GST

Total Cost

Including GST

Welder

36

Tool Box/Bins 18 Inch * 8 inch*6 inch 16Gauge sheet three step

Tool box/bins 18"x8"x6" , 16 SWG

sheet three steps

30 Nos.

37Tungsten Electrode 2.4mm 2% thoriated wt20 Liam

Tungsten Electrode Diameter 2.4mm x Length 150mm 2% thoriated wt20 Red Tip 10 Nos.

38

Welding Helmet Glass 4.5”*2” Blue Eagle

Welding Helmet =Photo sun type Glass , No 10

Standard Size Glass 4.5”x 2”

44 Nos.

39

Wire Brush 6 inch

Wire brush 6 inch

Strong and durable with solidly imbedded carbon steel bristles

Wood Shoe handle with pre-drilled hole for hanging

Carbon steel wire in 4 by 16 rows

4 Nos.

40Wire Spool 1.2mm Wire Size 15Kg weight

1.2mm Wire Size 15Kg weight AWS(Er 70s-6) for MIG/MAG Process10 Nos.

41

Work Station Jigs and Fixtures Model 60S* Fully loaded

Sturdy 1/8-in-thick steel frame construction consists

of 11/2 in square tubing weight capacity 454kg

Model 60S* Fully loaded

Sturdy 1/8-in-thick steel frame construction consists

of 11/2 in square tubing weight capacity 454kg

3 Nos.

42WPS/ Instruction Sheet Standard Size

WPS (welding procedure specification) according to ASME section IX / Instrction Sheet Standard Size4 Nos.

Machinery Items

43

Gas Cylinders (CO2, Argon) with accessories

Jumbo size,2000pound pak with Tig, Mig

Argon gas Cylinder (Attested) , Along with Cap

Internal/Service pressure =2400psig ,

Weight 143 lbs ,DOT Specs 3-AA , Height 55’’ (with Out Cap & Nozzle)

Outer Dia 9.25” , Approximate Capacity 277 Cu.ft *N2 @70*F atm, Internal Water Volume 49 litre,

CO2 gas Cylinder (Attested) , Along with Cap

Internal/Service pressure =2400psig ,

Weight 143 lbs , DOT Specs 3-AA ,

Height 55’’ (with Out Cap & Nozzle)

Outer Dia 9.25” , Approximate Capacity=

277 Cu.ft *N2 @70*F atm, Internal Water Volume 49 litre

10 Nos.

44

Generator 100kva

Generator 100kva

Process : SMAW,GTAW,FCAW and GMAW

Amperage range

AC SMAW , GTAW: 40 to 250 Amp

DC SMAW , GTAW: 40 to 275 Amp

FCAW and MIG :17 to 28 V

Rated output= 250A at 25V ,60% duty cycle

Welding process selector switch with auto-matic Polarity adjustment

AC and DC Out Put Capable Engine control switch Diesel Engine

Single phase Generator power Peak 11,000 Watts

Contonuous/Working =9500 Watt

Voltage=120/240Vac, 88/44A,60hz

Sound level =80db, Engine Horse power=19H.P at 3600 Rpm, Type Three cylinder , Oil cool, Diesel

engine , Stand by mode 2400rpm ,Working mode 3600rpm, Fuel capacity 12gallon (45litre)

Dimension LxWxH=(45x20x28) Inch (with-out Exhaust), Weight =289 to 300Kg with all accessories

(SMAW,GTAW,FCAW and GMAW)

2 Nos.

45

Welding Flux Drying Oven 100 Liter

100 Liter, Input Power= Single Phase Voltage: AC220V, AC220 /240V ,

electrode length= 450mm

Working temp.: 50-300 Degree C

Variable Resistance Switch

2 Nos.

46

Tungsten Electrode Grinder

Pedestal Grinding Machine

Accessories

• Eye Shields with Spark Arrestor

• Dust Collectors

-Gaurd

• Drill Point Grinding Attachment

Job Support/Tool Rest

With Standard Table Hieght= 2.5 ft

Technical Specifications

Electric Motor = 2HP

Input Voltage= 380 – 440 Volt, 3 Phase

Spindle Speed =1950 / 2200 rpm

Wheel Size = (Dia × Width × Bore)

300 × 40 × 31.75 mm

3 Nos.

47

Welding Flux Drying Oven 100 Liter

100 Liter, Input Power= Single Phase

Variable Resistance Switch

2 Nos.

3

Sr.


Unit Price


Price Per

Unit Including

GST

Total Cost

Including GST

Welder

IT Equipment Items

48

Laptop

Processor Intel 9th Ceneration Core i7 Processor 3.0 CHz or higher

Memory 8 GB- DDR-IV (Single Module) or higher, Support upto 32GB

Hard Disk Drive ITB (5400RPM) or higher.

Super Drive

lnternal

DVD-RW (Super Drive) or higher

Displal' Card/

Sound Card Builrin Video Craphics display and sound card.

Connectiv ity lntegrated Cigabit Ethernet (10/100/1000 Mbps), Built-in WIFI and

B luetooth

Display l5" High Definition Display or higher

Mouse & Key Touchpad Mouse and Standard Keyboard

Camera & Soeaker Built-in web cam rvith Mic, Integrated Speaker

Accessories

Original Carry-PacV Executive Bag (Branded) , Original Power Adapter &

Original Battery

Optional (Need Based)

Operating System Microsoft Windows l0 Professional or Latest Version (Licensed)

1 No.

49

Multimeda Projector

Brightness 3,000 Lumens (Lamp mode High) or better

Contrast Ratio

Native Resolution XGA (1024x768) or better

Aspect Ratio 4:3 or better

Acceptable Video

Signals

72Qp, 1080i,576i,576p

Lamp Life (hours) 3000 hour or hieher

Zoom Lens XI.J

Projection/ Display

Size:

30" to 300"

Optical Lens Shift Horizontal & Vertical

Ceiling Mountable &

Remote Control

Yes

Ports VCA. HDMI, PC AUdiO iN/OUt

USB Port PC-fiee slideshows feature with remote control (to run presentation

without Cornputer)

1 No.

50

Printer HP (Laser Jet Medium Duty)

Minirnum Print Speed: 40 PpM A,4 size,

Resolution 1200X1200 Dpi (1200 Image euality) or better.

Processor: 1024 MHz RISC or higher.

Mernory: 128 MB RAM or higher.

Paper Handling: Legal, ,A4 & letter size paper.

Duplex Printing: Auromatic Two-sided printing (Duplexer Card). .

Paper Tray(s): Two Paper Trays minimum.

Low Ink ind icator. Print cancel job etc

LCD/LED Display of the Print Status, with other Standard Features of the Manufacturer.

Drivers: Microsoft windows XP/vista/2003 l\i/|}/server 8l12 and Red Hat Linux

supportive. (with USB 2.0 cable)

1 No.

Total

4

Sr.


Unit Price


Price Per

Unit Including

GST

Total Cost

Including GST

HVAC

Tools Item

1Air Measuring tools

air velocity meter 4 digits measurements (10 to 50 m/s2) 3 set

2Allen Key set

9 pieces 0.5 to 12 mm10 set

3Blow Torch

flame type 5 set

4Capillary tube

capillary .028,.030,.031,.065 inches1 roll each

5

capillary tube cleaner

Hdrualic jack pressure type capillary tube cleaner sizes 0.30,0.31,0.36,

0.64 inches 5 set

6center punch

6 piece set HSS / Carbon Steel10 set

7chisels

6 inch complete set HSS / Carbon Steel20 set

8clamp on Amp-meter

AC+DC Electricity Ampere Measuerment digital 220V to 440 V 15 Nos.

9combination analysis tools

velocity + humidity+tempurature measuring digital merter 5 Nos.

10

Comperssor condenser

double tube type , shell and coil type, shell and tube type, 1/2 ton

capacity 1/4,1/5,1/6 comperssor

5 set

11Crimping Tool

crimping insultor remover plier type(8")3 Nos.

12

digital thermometer

Positive and Negative temp measuring from 20 to 45 degree

centigrade

5 set

13draft gauge

(+0.05 to 0 to -0.25" WC)5 set

14

drills

3,4,5,6,7,8,9 and 10mm bits for Sheet matel work HSS (for wall drilling

06-18 inches)

4 set

15

dry bulb & Wet Bulb Thermometer

handle type for wet and dry bulb temperature both thermomter(0-100

degree) centigrade and fahranhiet (32 - 212 F)

20 set

16Empty cylinder for Refrigerent

R22 R134 R4103 Nos.

17evaporator

coil fins type forced avaporator for non- frost Refigerator5 set

18

Expansion device

thermostatic expansion valve, Autometic expention valve,Hand

expanstion valve, low side float valve, high side float valve

5 Nos.

19

file set

for steel filing ,10 flate file set 8" 12" & for copper filing, 10 Round File

Set 1/2" 1/5" diameter

5 set

20filler gauge

0.05mm to 0.80mm15 set

21

flare tools

universal hydrualic, adjustable flare tool sizes : 3/16, 1/4, 5/16, 3/8 and

1/2” (for copper tube)

15 set

22gas charging adopter

adjustabel adopter, automatatic locator type, union type15 set

23hammer set ( MS, copper, robber)

500g to 1000g MS, Copper & Carbon Steel15 Nos.

24hollow punch

steel 17 piece set HSS 2mm to 25mm3 Nos.

25ladders

8' 10' 12' each4 Nos.

26leak decetors

digital with multiple ferion Gases5 set

27megar-meter complete set

for measuring Base earth 220 V to 440 Connectivity checking purpose3 set

28micron gauge

temp, Humidity measuing digital gauge (centigrade / fahranhiet) 4

29multi meter

AC DC Electricity Ampere Measuerment digital 220V to 440 V 5 set

30Nitrogen cylinder

leakage testing purpose standard size minimum 13kg4 set

31nitrogen tank

5 lb tank4 Nos.

32oxy accetylene cylinder/Oxy

2 x 250mm dia. 200kg SWL (safe working load). Standard size20 set



5

Sr.


Unit Price


Price Per

Unit Including

GST

Total Cost

Including GST

HVAC

33piercing valve

1/4,5/16,3/8,inches and 3in 1 size5 Nos.

34pinch of tool

plier type 6" HSS / Carbon Steel5 Nos.

35pipe cutter

adjustable GI Pipe (0 - 1 1/4 " )20 Nos.

36Pipe vice

GI Pipe vice hieght 12" with handle5 set

37pliers

6" & 8" standard for G.I Pipe5 set

38pressure temp measuring tools

low pressure(0-250 PSI) and High pressure Gauge (0-500PSI)5 Nos.

39pulley puller

3 leg external pulley puller (small,medium,large)5 set

40Reamers( copper)

inernal & External for copper tube (fixed / adjustable)5 set

41Ring spanner set

40 pieces in inches 5 set

42Ring spanner set

40 pieces in mili meter 15 Nos.

43Riveting Gun

plier type 12" 5 set

44Saws ( complete)

hand hack saw blade with frame (fixed / adjustable)4 Nos.

45scales

thermometer scale centigrade and fahrenheit dial type15 Nos.

46Scissors

6", 8 " , 10 " 15 set

47screw driver

flates and flips tip (6",8",12")15 set

48shear tool

electric hand shear tool for sheet work 6" to 12"10 Nos.

49shovel

hand shovel with wooden squad standard size20 Nos.

50sight glass

sight glass with both side flare Nut 1/2",1/4:,3/8",5/16"5 Nos.

51sling psychomotor

Chart (0-30 degree), 1-100 centigrade5 Nos.

52soldring iron

75Watt with stand5 Nos.

53sprit level

1' with both 90 Degree locator 8" to 12"5 Nos.

54steel rule

1' both inch & mm (0 - 12" & 0 - 300 mm)4 Nos.

55

sweging tool

lever and spining type Swages 3/16-Inch, 1/4-Inch, 5/16-Inch, 3/8-Inch,

1/2-Inch, 5/8-Inch and 3/4-Inch

5 Nos.

56

swedge

Hammer type 3/16-Inch, 1/4-Inch, 5/16-Inch, 3/8-Inch, 1/2-Inch, 5/8-

Inch and 3/4-Inch

4 Nos.

57tachometer

measuring RPM digital & analoag4 Nos.

58tap and die tool

GI Pipe 1/2" to 1.5" pipe4 set

59tin cutter

plier type 6" 12" Carbon Steel4 Nos.

60torch

gas welding torch size: min 8" (with all tips set)5 set

61try square

6"steel rule5 Nos.

62

tube bender

lever type 3/16-Inch, 1/4-Inch, 5/16-Inch, 3/8-Inch, 1/2-Inch, 5/8-Inch

and 3/4-Inch 0-180 degree

4 set

63

vacuum cleaner

electric vecuum cleaner for dust, Motor Max (W) : 100-1400, Dust

Capacity (L): 0.4, Suction Power:300-400 W

5 Nos.

64vacuum pump

3CFM to 5CFM3 Nos.

65wire brush

wooden handle standard size10 Nos.

66wire gauge

adjustable GI Pipe wrenches6",10",12"4 set

67wreches (assorted)

adjustable GI Pipe wrenches6",10",12"3 set

Total

6

Sr.


Unit Price


Price Per

Unit Including

GST

Total Cost

Including GST

HVAC

Machinery Items

68

comperssor

sealed type 1/4,1/5,1/6", semi sealed 5HP & open type type

reciprocating 5HP & , Rotary blade Rotary comperssor , scrol type 2

ton Capacity

5 set

69

different type of elecric motors

capacitor strat induction motor 1/2 HP, capacitor Run induction motor

1/2 HP, capacitor start and Runing induction motor 1/2 HP

5 set

70Grinders Hand

hand grinder with multi purpose disc wall and metal work (medium size)5 set

71Hand Electric Drilling Machine

220 V hammering type for wall drilling purpuse (Heavy duty)5 Nos.

72recover Machines Refrigerent gauge

plant with cyliner for R134,R22, R4105 set

73recover Machines Refrigerent gauge

plant with cyliner for R134,R22, R4105 set

Total

Total

7

Sr.


Unit Price


Price Per

Unit Including

GST

Total Cost

Including GST

Electronics Technician (Home

Appliances Technician)

1

Combination spanner set:

Combination spanner set of 11 pieces’ size: 8, 9, 10, 11,

12, 13, 14, 15, 17, 20 and 22 mm material and Head

material, chrome Vanadium Steel. Made by Germany.

japan, USA, uk Or equivalent

25 each

2

Allen key set:

Allen key Ball plus long Arm set Heat treated tempered

alloy steel provided high Key size: 1.2, 1.5, 2.5, 3, 4, 4.5,

5, 5.5, 6, 7, 8, 9, 10 mm size. Made by Germany. japan,

USA, uk Or equivalent

25 each

3

Hammer 100g:

Cross pein Hammer 100 gram with wooden handle Steel.

Made by Germany. japan, USA, uk Or equivalent

25 nos

4

Copper Hammer:

Copper hammer 425 gram with handle. Made by

Germany. japan, uk Or equaling

25 nos

5

Wooden Hammer:

Wooden Mallet hammer 100 gram 12” for electrician


25 nos

6

Files set:

File set of 9 pieces 6" double extra slim taper file 6" slim

taper file, 8" half-round file, 8" flat file, 10" half-round file,

10" flat file, 10" round file, 10" triangle file, 12" mill file, in

roll of pouch Made by Germany. japan, USA, uk Or

equivalent

25 each

7

Screw driver set (flat):

Screw driver set of 9 pieces (flat) Flat (slotted)

screwdriver, 0.5 mm (0.02 inch) thick, 0.8 mm (0.03 inch).

1mm (0.04-inch-thick x 3mm (0.12 inch), thick x 4mm

(0.16 inch), thick x 5.5 mm (0.22 inch) thick x 6.5 mm

(0.26 inch) wide x 80mm (3.15 inch), wide x 125mm (4.92

inch). Made by Germany. japan, USA, uk Or equivalent

25 each

8

Screw driver (Philips):

Screw driver set of 9 pieces (flat) Flat (slotted)

screwdriver, 0.5 mm (0.02 inch) thick, 0.8 mm (0.03 inch).

1mm (0.04-inch-thick x 3mm

25 each

9

Combination plier 6":

Combination plier 6” with insulation handle Pliers made

from high grade Steel, fully insulated with quality plastic

material sleeves ensures safe electrical working, excellent

wire cutting ability for soft and hard wires, with fully

polished head or Black phosphated and bright polished

head. Made by Germany. japan, USA, uk Or equivalent

25 nos



8

Sr.


Unit Price


Price Per

Unit Including

GST

Total Cost

Including GST



10

Eache (Nose) plier 6":

Eache plier 6” accurately machined and heat treated

jaws. Holds very thin wires and cuts fine wires with ease.

Made by Germany. japan, uk Or equaling

25 nos

11

Crow bar:

Crow bar 12" for electrician. Made by Germany. japan,


25 nos

12

Hand hacksaw:

Hand Hacksaw 300mm adjustable Heavy duty hacksaw

with Aluminum handle and strong box section steel beam

for professional performance Integral blade tension lever

Blade adjustable through 360 degrees at 45 degree

intervals. Made by Germany. japan, USA, uk Or

equivalent

25 nos

13

Socket set:

Socket set of Metric Sockets 8 to 34mm Consist of

Socket S-8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 – 16 - 17 - 18 -

19 - 20 -21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 -

32 - 33 - 34 Sliding Tee S.120A Extension 125mm S.210,

Extension 250mm S.215, Universal Joint S.240A, Speed

Brace S.110, Ratchet S.161 . Made by Made by

Germany. japan, USA, uk Or equivalent

25 each

14

Punch set (A_Z):

Punch set (A-Z) Hardness, High strength, Anti corrosive 8

x 75 mm, Finish: Black Burnish Finish, Material: Carbon

Steel, Technical : Induction Hardened. Made by


25 each

15

Number punch (0-9):

Number punch (0-9) Hardness, High strength, Anti

corrosive 8 x 75 mm, Finish: Black Burnish Finish,

Material: Carbon Steel, Technical: Induction Hardened.


25 nos

16

Impact wrench manual set:

Impact wrench manual set 1/2-Inch Drive Manual Hand

Impact Driver Set, of 7 Piece, Instant impact force

loosens rusted or frozen screws without damaging them,

Forward and reverse drive direction, Drives included

screwdriver bits or any 1/2 in. drive impact socket,

Comfortable handle with non-slip knurled grip, Frees

corroded brake caliper screws and other vehicle or

outdoor fasteners exposed to the elements, material and

Head material, chrome vanadium Steel. Made by


08 each

17

Pipe wrench 8":

Pipe wrench 8” Length 8”, use: all type of pipe work, Jas

type: Full-floating forged hook jaw with self-cleaning

thread, Made by Germany. japan, USA, uk Or equivalent

08 nos

18

Adjustable screw wrench 8":

Adjustable screw wrench 8”, Head Width 9/16”, Opening

1 ¼”. Overall length 8” . Made by Germany. japan, USA,

uk Or equivalent

25 nos

9

Sr.


Unit Price


Price Per

Unit Including

GST

Total Cost

Including GST



19

Chain wrench 12":

Chain wrench 12” , Double action allows use in either

direction, Concave-cut teeth for improved gripping; easily

re-sharpened if needed, Chrome Plated to resist rust,

Strong I-beam handle construction. Made by Germany.


25 nos

20

Grip plier 6":

Grip plier 7” Fast release curved Jaws capacity 1 ½”.


25 nos

21

Inspection mirror:

Inspection mirror Shape: Round, Mirror Size: 3-1/4 Dia,

Overall Length: 15in, Expandable Handle Material: Vinyl

(Grip), Material Category: Plastic. Made by Germany.


08 nos

22

Magnify glass 4":

Magnify glass 4” Length 7”, Glass diameter: 4”, Power

dual 3x and 10x lens material: Real glass, Made by


25 nos

23

Packing puller:

Packing puller 11” overall length with t-handle and 5/16”

Dia-cork screw tip. Made by Germany. japan, USA, uk Or

equivalent

25 nos

24

Measuring tape 6m:

Measuring tape 3M Pocket Steel Measuring Tape 3M

Metric/English tape A: Zero point at inside of the tip, with

belt clip, Ostop convex with rock button, with hand strap,

compact, High quality carbon steel with acrylic resin

coating, accurate measurements. Made by Germany.


25 nos

25

Scriber 4":

Scriber 200mm Double ended: 1 x straight & 1 x 90°,

Precision engineered with hardened steel tips, Chrome-

plated to resist corrosion, Knurled aluminum grip for

balance & control, For marking or scoring metal,

laminates, plastics & other materials Made by Germany.


25 nos

10

Sr.


Unit Price


Price Per

Unit Including

GST

Total Cost

Including GST



26

Gauges (filler, universal, thread, angular, radius,

depth, height, slip, bore, telescope, go /not go):

a) Filler Gauge 26 Blades 0.03 mm to 1.00 mm. b)

Universal Gauge height: 300mm, base length: 80mm,

65mm. c) Thread Gauge 1x0.25 to 39x4. d) Angular

Gauge Measuring range: 1 - 45°, numbers of blades: 20,

angles: 1°-2°-3°-4°-5°-6°-7°-8°-9°. e) Radius Gauge

measuring range radius: 1-25mm,f) Depth Gauge Dial

range: 0.05mm base size: 100x6.5mm (WxT), Range: 0

to 8, dial range:0.001. g) Height gauge digital 300mm,

resolution: 0.01mm, fine adjustment range:10mm, display

5 digit LCD, with dial indicator and all accessories,

measuring range:0 to 0.8mm. h) Slip Gauge set of 56

slips is made up as shown below :9 slips 1.001 to 1.009

in steps of 0.001 mm. 9 slips 1.01 to 1.09 in steps of 0.01

mm. 9 slips 1.0 to 1.9 in steps of 0.1 mm. 25 slips 1 to 25

in steps of 1.0 mm. 3 slips 25 to 75 in steps of 25 mm.

Slip of 1.0005 mm. i) Bore Gauge measuring range:

60 to 100mm, Mic head: 10mm, Sub Anvil: 10mm to

20mm, Wide range accuracy: 2um, Repeatability: 0.5um

adjacent Error: 1um. j) Telescope Gauge range: 8 to

150mm, set of 6 measuring spring loaded plage. k)

Go/Not go Gauge. Made by Germany. japan, USA, uk Or

equivalent

08 each

27

Dial indicator (digital, analog) (0.001”) with stand :

a) Digital Range:0-12, Accuracy: 0.005, Resolution:

0.001,b) Analogue: out side Screw gauge (0.01mm), for

precise straightness Or different measurement, Rotatable

bezel with adjustable tolerance markers, with shockproof

dial mechanism, jeweled bearing Made by Germany.


08 nos

28

Micrometer (1”-0.00005”) analog, digital :

a) Analogue: graduation: 0.01mm, 0.001mm, Flatness:

0.6um for models up to 300mm, Parallelism:

(2+R/100)um, R=max. rang(mm), measuring faces:

Carbide tipped. b) Digital: Accuracy list of

specifications. Resolution: 0.001mm or 0.001mm,

Flatness: 0.3um, Parallelism: 2um, measuring faces:

Carbide tipped, Display: LCD, Provided with a zero-set

key for easy origin setting, Made by Germany. japan,


08 each

29

Tachometer (analog, digital) (0.5-30,000) rpm:

a) Analog mechanical Tachometer, Range 0 to 10,000

RPM, Graduation: 2 RPM, Accuracy: ±0.5%, with

Concave rubber contact tip, convex rubber contact tip,

wheel (pulley) for peripheral speed measuring, spare

rubber contact tip.Made by Germany. japan, USA, uk Or

equivalent. b) Digital High Precision Optical tachometer,

contact-free measuring via laser or mechanical

attachment/ for linear measurement (in, m, FT, Yd.),

Frequency (in, m, FT, Yd), 5 digits large lighted display,

Adapter attachment for mechanical measurement, Range

laser-optic: 2.0 to 99,999, Range mechanical: 2.0-20,000

RPM, Resolution: 0.1 u/min 2.0-9999, 9 RPM, 1U/min

10,000-99,999 RP, Accuracy ±. 0.05% RPM measuring

Distance: 50-500mm,Made by Germany. japan, USA, uk

Or equivalent

08 each

30

Stethoscope dual head 22”:

Dual head 22” (56cm) thick walled tubing minimizing

background interface, lightweight non-chill ring. Made by


08 nos

11

Sr.


Unit Price


Price Per

Unit Including

GST

Total Cost

Including GST



31

dB meter:

db. meter LCD display: 4 digits, Measuring Level: 30 ~

130 dB(A) Accuracy: ±1.5 dB, Frequency Response: 31.5

Hz ~ 8.5 kHz, Resolution: 0.1 dB, Sound Level: Level 1:

30 ~ 80 dB, Level 2: 50 ~ 100 dB, Level 3: 60 ~ 110 dB,

Level 4: 80 ~ 130 dB, Level 5: 30 ~ 130 dB, Dynamic

Range: 50 dB / 100 dB, Analog Bar Graph: 1 dB / 1 bar

graph, PWM Signal Output: duty cycle = 0.01 x dB value

x 100% / 3.3, with Sponge Ball, USB cable, Software CD,

SD memory card.Made by Germany. japan, USA, uk Or

equivalent

08 nos

32

Multi Meter (digital and analog):

a) Digital Multi-meter: Display: 3 1⁄2 Digits with max.

reading 1999, DC Voltage: 200m/2/20/200V

±0.5%,1000V±0.8%, AC Voltage : 2/20/200V±1%

,700V±1.2%, DC current: 2m/20mA±1%, 20mA±1.5%,

10A±2%, AC current : 2mA±1.2%, 200mA±2%, 10A ±2%,

Resistance : 200/2K/20K/200K/2M/20MΩ±1, 200MΩ±5%,

Capacitance: 2n/20n/200n/2μ/20μF±4.0%, Temperature: -

20°c 1000°c±3%(optional), Frequency :

20KHz±1.5%(optional), Continuity Test, Diode Test.b)

Analog Multi-Meter Dc Voltage: 10-50-250-500V, AC

Voltage: 10-50-250-500V, DC Current: 10, 100,250.

500mA and 10A, Resistance: x10,x100,1K, continuity

Test. Made by Germany. japan, USA, uk Or equivalent

25 each

33

Screw drivers (different type and tips):

Screwdriver Different type and tips Heavy duty models,8

piece Screwdriver set: tip type Keystone* , tip 6mm, type

square, length 102mm, overall length 212mm, tip type

Keystone* , tip 8mm, type round, length 152mm, overall

length 278mm, tip type cabinet, tip 8mm, type round,

length 38mm, overall length 87mm,tip type cabinet, tip

5mm, type round, length 38mm, overall length 171mm,

tip type Philips, tip #1, type round, length 76mm, overall

length 171mm, tip type phillips, tip #2, type round, length

38mm, overall length 87mm, tip type phillips, tip #2, type

round, length 102mm, overall length 211mm, tip type

phillips, tip #3, type round, length 152mm, overall length

279mm. Made by Germany. japan, USA, uk Or

equivalent

25 each

34

Bubble level (sprit level):

Torpedo level Or toolbox level: length 12”, full plastic

body, Made by Germany. japan, USA, uk Or equivalent

05 nos

35Table lamp:

Table lamp 220V standard with lamp25 nos

Total

12