tools & a - freebenoit.dc.free.fr/technique/parts/mini13.pdf · tires bonnet and body...

Mini Mania 13-1

13

TOOLS & ACCESSORIESWheels and Center Caps

Tires

Bonnet and Body Accessories

Doors and Fittings

Handles and Winders

Mirrors and Bumpers

Wheel Arches and Flare kits

Roll Cages and Moldings

Grilles

Dress up parts

Petrol Tanks

Guages

Dashes

Mats and trim

Cobra seats

Knobs and Pedals

Steering Wheels

Race and Rallying parts

Tools

Books and Videos

Keyfobs and Stickers

Toys

13-2 www.MiniMania.com e-mail [email protected] 800-946-2642 Tech: 408-942-5595

WHEELS

1 2

7

6

6

4 5

98

3

Mini Mania 13-3

13

DESCRIPTION

1 . REVO Genuine Revolution Wheels. The original style 4 spoke specification which arecomplete with center caps for the 63mm hole and stainless steel sleeved wheelnuts, except for the 13 wheel, has a different size chrome nuts.REVO1= 5 x 10 4 spoke, REVO2= 6x10 4 spoke,REVO3 = 5 x 12 4 spoke, REVO4= 6x12 4 spokeREVO5= 6 x 13 4 spoke.

2. REVO New 5 spoke RFX range as fitted to Mini Cabriolet and German Special Editions.The original 4 spoke Revolution fitted a sleeve type nut, but because RFX takestandard type wheel nuts they are not supplied. The 5x12 RFX uses the Mini/Cooper late type wheel nut NAM9075. The 6x13 RFX takes the large seat radiustype CN5.

REV11= RFX 6 x13, REV12= RFX 5 x12

3 . Minilite This is the new designed wheel by the newly formed Minilite Company. Theirwheels have the new distinctive logo center cap, the word Minilite embossedonthe rim.D344/A = 5x10, D456/A= 6x10

4 . Mamba The old and original Mamba as used since the 1960�s worldwide, is available in5 x10 and 6 x10, complete with center cap and stainless steel sleeved wheelnuts.WHL1012=5 x10, WHL1013=6 x10

5 . Superlite Austalian 6x13. * spoke type wheel. Includes CN5 chrome wheel nuts.C-21A1071

6 . Minilife Mini Spares own minilife 5x12 wheel shown in anthracite with diamond cut edge.From the same designs as all the minilife range, depicting the sporting characterof the 60�s and 70�s, which have the image favoured for the 90�s coopers. Alsoavailable in silver 41/2x10. Complete with front fitting center cap to fit the 67mmhole and stainless sleeved wheel nuts have a tapered washer for extra alignmentquantities. These wheels are being subject to testing for T.U.V.(Germany) andJ.W.L.(Japan). Wheels sold individually.

For anthracite diamond cut 5x12 C-21A1965For silver diamond cut 5x12 C-21A1966For anthracite diamond cut 4.5x10 C-21A1963For silver diamond cut 4.5x10 C-21A1964

7. Minilife The rest of the Minilife range of wheels. These are the original, silver all over,Minilite wheels that are faithful reproductions of those used by Special TuningAbingdons works and classic cars of the 60�s and 70�s. All supplied withstainless steel sleeved wheel nuts and center caps.

8. C-21A1967 The original 5 x 12 sprayed in Silver with center cap to fit the 67mm hole andstainless steel sleeved wheel nuts, with a tapered washer for better centralization.

9 . C-21A1968 The original thick front rimmed 4 1/2 x10 wheel fits within the bodyline withoutrequiring wheel arches, as per Special Tuning Abingdon specification in LM25 alloy.


WHEELS

12 13

11

7 9

10 8

6

4

3

5

1 2

Mini Mania 13-5

13

DESCRIPTION

1 . Rover Original Rover latest 13x6� only. Wheel used on cars with sportspack. Orderindividually as part number RRC109640NMH.

2. Rover Similar looking sports pack wheelwith 55mm centre cap hole.5x13� WHL10176X13� RRC109640MS7X13� WHL1020

3 . Miniator 5x10� Miniator 8 spoke wheel very similar to GB alloy with a center cap size of51mm. This uses standard nuts as used on pre 1984 steel wheels or chromeversoins CN4 or CN1. Supplied less nuts. # WHL1000

4 . Miniator 5x13� Miniator 8 spoke alloy wheel is available in silver or antracite with diamondcut edge wityh center cap for 59mm hole. Uses standard nuts as fitted to steelwheels 1984 on with 60 degree taper or chrome CN2 as an alternative. Suppliedless nuts.-Miniator in silver all over to fit Mini-5x13 # WHL1005-Miniator in silver all over to fit MG midget or sprite. Same wheel but with built in 5mm spacer.-5x13 # WHL1006-Miniator in anthracite with diamond cut edge to fit mini. 5x13 # WHL1007

5 . Miniator 5.5x13 Miniator wheel in silver only for Mini. Uses standard nuts used on steelwheels 1984 on with 60 degree taper or chrome CN2 as an alternative.-# WHL1008

6 . Caps Cap for Miniator 13� wheels. 59mm wide front fitting with badge/logo face areaof 40mm. # WHL1010

Cap for Miniator 10� wheels. 51mm center whole fitting.(not shown) #WHL1011

7 . Caps Weller steel wheel cap for 10� wheels. 63mm back/rear fitting with badge logoface area of 45mm. Comes with weller sticker seperate. #WELLA CAPSWeller steel wheel cap for 13� wheels. 69mm back/rear fitting with badge/logoface area of 45mm. Weller stickers are seperate. # WELLA CAPS12

8 . Caps Mamba cap, 76mm wide, front fitting. # WHL1014

9 . Caps Minilife cap, 67mm wide front fiting with badge/logo face area of 40mm. Minilifesticker seperate. Fits most original Tech Del Minilite wheels (check size).# C-21A1970

10. Caps Revolution plastic front fitting cap, 63mm front fitting for all 4 spoke type plus6x13 RFX. #REV0655mm for RFX 5 spoke 12� only. # REV07

11. Valve Caps Cooper emblem set of four. # MSA1123

12. Valve Caps Blue alloy # MTC6, Red alloy # MTC5, Gold alloy # MTC4, Silver alloy # MTC3

13. Decals Mini Cooper 50mm wheel decal #sticker21Minilife 50mm wheel decal #sticker26.


Tires

1 2 3 4

5 6 7

8

9 10 11

12 13

Mini Mania 13-7

13

NO. PART NO. DESCRIPTIONTIRES

1 . TYRE09 Colway MS Knobby 165x10. Good for muddy stages, grass tracking or wintrysnow conditions, soft wall.

2 . TYRE07 Falken 165x70x10 (OHTSU from Japan)

3 . TYRE01 Falken 165x60x12

4 . TYRE15 Yokohama AO32-R, 165x70x10. Aqua tusk tread design to increase tractionin the wet. This simetric tread pattern and advanced high grip treadcompound improves braking and cornering performance.

5 . TYRE02 Yokohama A008 175x50x13. High performance, competition grade tire withasymmetric tread pattern.

6 . TYRE091 Yokohama A510, 165x60x12. Unique tread pattern, great for wet or dry.Improved cornering and tread life.

7 . TYRE08 Yokohama A008, 165x70x10. The Aoo8 specification is every serious Miniowners�s favorite 10� tire.

8 . 205/50-10 Low profile Titan tire. An inch lower and an inch and a half wider than anythingwe�ve had before with deep aggressive tread!

9 . HOOSIER-10 165/70-10 RACE TIRES This is the tire to beat in vintage racing orautocrossing when slicks are not appropriate. They are 165/70 (bias ply) insize, but when mounted on a wheel look much wider.

10. PIRELLI/12 Pirelli P3000, 145x70x12 tire.

11. TIRE12 Nankang 145/70-12 tire.

12. TIRE03 OHTSU 165/70-10 tires. These Japanese-made steel belted radial Ohtsu tiresare made to last. 4.5" minimum wheel width is necessary to run 165 tires.

13. FALKEN/12 Falken tire 165/60-12


1

2

3

4

5

68

7

9

Wheel Spacers and Locknuts

Bonnet

4

5 6

6a

4a

3

2 1

Body Accessories

Mini Mania 13-9

13

WHEELS SPACERS & LUGS

1 . CW16 Pair of wheel spacers with studs 1� (25mm wide).

2 . CW15 Pair of wheel spacers with studs 3/4� (19mm wide).

3 . CW1 Pair of wheel spacers with studs 3/8� (10mm wide).

4a. SR4 Pair of wheel spacer shims (5mm wide).

b. SR3 Pair of wheel spacer shims (3mm wide).

5 . Wheel stud length starts from shoulder to end, not end to end.

2112064 Stud length 35mm with thread length 22mm.21A2064L Stud length 50mm with thread length 29mm.NAM5645 Stud length 32mm with thread length 23mm.21A1278 Stud length 55mm with thread length 20mm.ENJO-1039 Stud length 58mm with thread length 19mm.ENJO-1040 Stud length 78mm with thread length 27mm.

6 . LOCKNUT 1 4 locking nuts for latest Mini/Cooper 8 spoke Alloy.LOCKNUT 2 4 locking nuts for Mamba/Revo 10� wheels.LOCKNUT 3 4 locking nuts for Minilife/Original Minilite wheel pre 1980.LOCKNUT 4 4 locking nuts for 13� RFX/Phoenix/Superlite large radius seat CN5 nut.LOCKNUT 5 4 locking nuts, Mini steel - 84 on, Wella CN2-type.LOCKNUT 6 4 locking nuts, Mini steel - pre 1984. GB alloys CN1/2 type.

7 . CN1 #6 Chrome long nut, equiv. type fitted to Mini steel whls to 1984, roundradius bottom.

CN1A #6 Chrome short nut, equiv. to CN1 above.CN4 Lrg. seat # 6 Chrome long nut for round seat per steel wheel pre �84. Can be

used for CN1 if req�d.CN2 #5 Chrome long nut, equiv. to type fitted to all steel whls. from �84, 60

degree angle bottom. Fits Wella and Minator.CN5 Large seat #5 Chrome long nut fits Superlite, Revo RFX 6x13 or any whls. w/

60 degree deep seat for nut.

8 . C-21A1969 Sleeve nut and chamfered washer in stainless steel for Minilife.CN3 Chrome sleeve nut and flat washer for Wolfrace/Slot Mag/Old Minilite.REV09 Sleeve nut in stainless steel for Mamba/Revolution with washer.

BONNET and BODY ACCESSORIES

1 . MSSK019 Quick release bonnet hinges for standard metal bonnet. Pair of mk3 bonnethinges made for removing the whole bonnet for engine work.

2 . GS130273 Internal realease bonnet lock. The kit includes a new catch with bolts, correctlength cable and bracket to fit at the end of the parcel shelf. (not clubman)

3 . MSSK018 Spring loaded bracket bolts to original hinge as safe auxillary bonnet prop.

4 . RS17 Front plastic spoiler for Mini, about 6.5� deep.4a. RS18 Front plastic spoiler for Mini Clubman, about 6.5� deep.

5 . EBF100150 Plastic boot load liner sturdy, lightweight and easily removable. Tailor made for cars from 1974on with larger 7.5 gallon petrol tanks.

6 . MSA1118 Antenna. Wing mounting telescopic aerial, budget replacement6a. MSA1119 Antenna. Roof aerial for the 60�s look


Doors and Fittings

1 2

3

4

5

6

1 1

1 21 3

9

10 8

7

2 7

2 1

2 2

2 32 4

2 5

2 6

2 01 4

1 5

1 71 9

1 8

1 6

Mini Mania 13-11

13

WHEELS SPACERS & LUGS

1 . 14A7176 R/H door pocket alloy kick plate2 . 14A7177 L/H door pocket alloy kick plate

3 . 14E4289 Red door check strap.4 . 14E4290 Grey door check strap.5 . ALE1221 Black door check strap.6 . 14E4291 Green door check strap.

7 . 14A6745 Check strap bracket on body, two per car.8 . 14A764 Strap retainer, recessed screw holes, four per car.9 . 14A6744 Door pocket stiffener plate, two per car.10. SG604073 Check strap screws, 8 per car less nuts.

11. EAM8530 R/H vertical draught excluder between sliding door glass.EAM8530 L/H vertical draught excluder between sliding door glass.

12. 14A6833 Nylon dove tail guide for door.13. 14A6835 Retainer guide plate for dovetail on door frame.

14. 24A1194 Front window plastic catch R/H.24A1195 Front window plastic catch L/H.

15. 24A1196 Rear window plastic catch R/H.. 24A1197 Rear window plastic catch L/H.

16. 24A1198 Sealing gasket for window catch.17. 14A8151 Chrome boss to fix catch to window18. 14A7065B Correct size fibre for chrome boss.19. RMP307 Chrome headed screw for boss20. MSSK015 Complete car set of 4 catches and ancillaries.

21. 14A9773 for R/H Upper window moulding as per original Cooper and S mk 1/2 in stainless14A9774 for L/H steel for sliding windows only.

22. 24A341 for R/H Lower window moulding as per original Cooper and S mk 1/2 in stainless24A342 for L/H steel for sliding windows only.

23. EJU10003 Interior moulding and seal for all wind up window models, either side.

24. CZH1666 for R/H Outer door moulding and seal for wind up windows 1970 on as original onCZH1667 for L/H Cooper S and Mk3 upto the introduction of black protective end caps.

25. PAM1014 for R/H With protective black ends from 1981 on, outer window moulding with seal.PAM1015 for L/H clips are ADH3809 5 required.

26. BG5401 Original 1960�s accessory metal door stay kit.

27. 14A6818K(pair) Set of four hinges, bare (zinc alloy with stainless steel fittings for all Minis withexternal hinges.

14A6818 Upper R/H hinge14A6819 Upper L/H hinge14A6820 Lower R/H hinge14A6821 Lower L/H hingeBMP135 Gasket for hinges to �A� panelALA7844 Gasket for hinges to door


Handles and Winders

1

2

3

7

1 0

6

9

5 8

4

1 4 1 5

1 9

2 11 6

2 0

1 8

1 7

2 3

2 4

2 2 2 52 6

Mini Mania 13-13

13

DOOR WINDERS

1 . MSA1130 Polished alloy window winder handle2 . MSA1131 Polished alloy door open handle3 . MSA1132 Polished alloy door pull/grab handle

4 . MSA1133 Stainless steel bezel for door catch.

5 . MSA508GOLD Anodised gold alloy window winder.6 . MSA509GOLD Anodised gold alloy door open handle.7 . MSA510GOLD Anodised gold alloy door pull/grab handle.

8 . MSA508 Anodised silver alloy window winder.9 . MSA509 Anodised silver alloy door handle.10. MSA510 Anodised silver alloy door pull/ grab handle.

11. MSA1130C Carbon fiber window winder handle.12. MSA1131C Carbon fiber door open handle.13. MSA1132C Carbon fiber door pull/ grab handle.

CHROME LOCKS AND HANDLES

14. BONNETLOCK key operated that fixes to the grille where release is located.15. 8B12500 Door scoops, only for roll up window type doors, pair.

16. 8B12499 Scoop aith Monte Carlo Rally emblem etched on.17. G282 Chrome plated metal window winder handle sold individually.18. G283 Chrome plated metal door opening handle, sold individually.

19. CZH1785 for 3pc kit, CZH886 for R/H handle and key, CZH887 for L/H handle and key.Outer Chrome door handles from 1970 on. All matching barrells and keys.

20. JRC2844 Rear boot handle as fitted from 1970, with barrel and key.21. BARREL-SET Set of three matching barrels and keys.

DOOR HANDLES

22. MSA1142 Pair of door opening handles.

23. MSA1141 Pair of window winder handles.

24. MSA1140 Pair of door arm rests.

25. MSA1144 Stainless steel/chrome interior mirror.

26. MSA1143 Extension clip that fits on rocker switches for lights only.


Mirrors and Bumpers

1a

3

6

9

8 7

24

5

1 5

1 1

1 2

1 4

1 3

1 6

Mini Mania 13-15

13

MIRRORS AND BUMPERS

1 GAM105 Classic shape chrome torpedo mirror with flat glass for wing fitment. (a) GAM105C Classic shape chrome torpedo mirror with convex glass for wing fitment.

(Convex glass makes objects appear smaller and farther away.)2. GAM106 Alloy torpedo mirror with flat glass for wing fitment.3. Polished right hand door mirror complete with base and fitting. a. GAM215A R/H mirror with flat glass, stainless steel body. b. GAM217A R/H mirror will convex glass, stainless steel body. c. M688990E R/H mirror with flat glass, metal black body.4. Polished left hand door mirror complete with base and fitting. a. CAM216A L/H mirror with flat glass, stainless steel body. b. GAM218A L/H mirror with convex glass, stainless steel body. c. M688991E L/H mirror with flat glass, metal black body. 5. Original Tex round chrome mirror as used in the 1960's. a. 8G8731 Round chrome mirror with convex glass. b. 8G8710 Round chrome mirror with flat glass. 6. Original Tex classic alternative oval shape to the round mirror in the 1960's. a. M50201 Classic shape chrome mirror with flat glass. b. M50211 Classic shape chrome mirror with flat glass. 7. M16007 Tex chrome short straight arm. 8. N16008 Tex chrome angled arm. 9. M16009 Tex chrome curved arm.

670 Headlamp Eyebrows, Chrome11. JPC9848 Plastic door mirrors as fitted from 1980 on r/h. l/h-JPC984912. DMC92140 Plastic covers in carbon fiber weave look, to glue onto mirrors.13. CRB10184NAL Rover white painted mirror as fitted on coopers 1994 on. l/h-CRB10185NAL.14. DMC92141 White plastic covers to glue onto original plastic mirrors to create the Cooper look.15. MSA1144 Stainless steel/chrome interior mirror.16. MS25 Original kit complete with bumpers, corner bars, overiders and all fittings.17. KIT Front and rear kits of overider and corner bars, but less bumpers where purchasers wish to drill their own

stainless steel bumpers. Reverse lamps fitted from 1983 on will have to be relocated using bracketMSSK024. (a) For cars pre 1997 or late coopers with 2 spot lamps only-MSSK025. (b) Cars with 4 spotlamps or 1997 on, a different front kit is used with original rear kit-MSSK026. (c) A front kit only for cars with4 spot lamps or 1997 on. Has shorter corner bars.-MSSK027.

18. BUMPER Stainless steel bumper with holes for corner bars can be ordered individually-14A9871. (a) Genuine Roverstainless steel bumper without holes-DPB10166. (b) Budget chrome bumper-14A6779MS. (c) Budgetstainless steel bumper-DPB10165MS.

19. OVERIDER Stainless steel overider with hole for right hand front or left hand rear-14A9923. (a) Stainless steel overiderwith hole for left hand front and right hand rear-14A9924. (b) Plain stainless steel overider for mkII withoutholes-14A8738.

20. CORNER BAR Right hand front corner bar stainless steel- 14A9877 (a) Left hand front corner bar stainless steel-14A9878. (b) Right hand rear corner bar stainless steel- 14A9919. (c) Left hand rear corner bar stainlesssteel-14A9920.

21. KIT Fitting kit for mkI corner bars and overiders-MSSK010. Fitting kit for mkII overiders only-MSSK011.


MINI FLARES, SPOILERS, ETC.

1

6

5

7

8

4 3

2

Mini Mania 13-17

13

Flares DESCRIPTION

1 . MS131 EURO ARCH IN FIBERGLASS - This arch sticks out approximately 2.750" and enables bodyline(wheel arch & moulding lip) to be cut or modified to allow fitment of large wheels, ie:13" and isattached by screws from back of wing, (hence no visible screws). Fiberglass arch extendsbeyond bumper seam line at rear.

2 . MS128 GROUP 5 ARCH IN FIBERGLASS - This arch kit sticks out 3" and is used when body line iscut away or retained. Originally as a group 5 arch it was made for cars with no modificationsbut has become a cheap �jack of all trades�especially when large odd size wheels are used. Reararches stop at bumper seam line. Widest part at front approximately 5".

3 . MS132 MINI SPECIAL ARCH 1" WIDER IN FIBERGLASS - This arch kit sticks out 2.750" whenbodylines (wheel arch & moulding lip) are as original. The arch is similar to the plastic type fittedby Rover but is 1� wider. Fiberglass arch extends beyond bumper seam line. (not illustrated)

4 . C-AJJ3316 GROUP 2 IN FIBERGLASS - This arch kit sticks out 1.75", including lip, when bodylines (wheelarch and moulding lip) are kept original. Screws are visible and the chrome wheel archmoulding can be retained. These are copies of original ST Abingdon works arches. Rear archesstop at bumper seam line.

5 . C206 ALLOY ARCHES - This arch kit sticks out 1.75", including lip, when body lines (wheel arch& moulding lip) are kept original. Screws are visible as per securing lip and plastic wheel archmoulding can be retained. Rear arch slope at bumper seam line. Often used by Vintage/Historicracers overseas or foundation to blend and build on fiberglass arches.

6 . C-STN71 WORKS GROUP 5 ARCH IN FIBERGLASS - This arch kit sticks out 2.5", including lip, whenbodylines (wheel arch & moulding lip) are kept original. Screws are visible and plastic wheelarch moulding can be retained. Rear arch stops at bumper seam line. These are original STworks car copies.

7 . MS133 WP ARCH IN FIBERGLASS - This arch kit sticks out 2.25" maximum when bodyline(wheel arch& moulding lip) are kept original. Screws are not visible. Front arches taper away at frontexposing tire tread. Rear arches stop at bumper seam line. Has correct body to arch rubber sealincluded.

8 . GAW117 PLASTIC ARCH known as MINI SPECIAL ARCHES - (includes moulding between arches) Thisarch kit sticks out 1.750" when bodyline (wheel arch & moulding seam) are kept original.Originally fitted to Innocenti Minis become standard equipment on all Minis from 1984. Archesavailable separately. Screws are visible and rear arch extends beyond bumper seam line.

(not shown)


MINI FLARES, SPOILERS, ETC.

10

9

14

1 5

1 6

1 1

1 7

1 8

1 9

2 0

Mini Mania 13-19

13

F lares DESCRIPTION

9 . MS128W GROUP 5 EXTRA WIDE - This arch kit sticks out a nominal 3.5" and more when positioned atthe angle most racers use as shown. 5.5" wide at very front. Definitely only for cars with bodylinemodifications and fairly inexpensive to replace. Rear arches stop at bumper seam line. (notshown)

10. SK200 Black ABS plastic styling kit includes front, rear spoilers and wheel arch extensions with stilltrims built in. Has full fitting instructions and parts required. Can be painted using two packacrylic paint. Has a cut out in the rear valance for a fog lamp which was fitted from 1982.

11. FR200 Roof spoiler to compliment kit in ABS plastic from same manufacturer as SK200. (not shown)12. FR201 Boot spoiler from same manufacturer again to completely dress up your car. Black ABS plastic.

(not shown)

14. BG2405MS Set of 4 stainless steel covers to fit over the original plastic arches as fitted by Rover since 1984.15. BG2046MS Set of 2 stainless steel strips to fit on the body edge.

16. MS136 Latest mini arches in fiberglass sticks out 3 1/2� and bodyline is cut away. Available in fiberglass askit MS136, or as fitted by rover in rubber from 1996 on. R/H/F Arch- DFJ100240LML, L/H/F Arch-DFJ100250LML, R/H/R Arch- DFJ100460LML, L/H/R Arch DFJ100470LML.

17. MS129 Superflares- Front 4� Rear 4 1/2�

18. MS130-NASA Superflares- Front 4-5� Rear half body side 5 1/8-6 �

19. SK202 Exact replica of the ERA body kit (shown here on a convertable) with vented front spoiler for cooling.Body modifications will be required. Recommended use with 13� wheels. Molds into bodyworkunlike ERA, but could be adapted to fit with sealing rubber between body and arch kit.

20. SK203 Replica of the Lamme body kit as fitted to the Rover Cabriolet(shown here on a standard mini). Bodymodifications will be required. Recommended use with 13� wheels. Has slightly softer bodylinesthan the ERA replica kit. Molds into bodywork and fitting instructions are included.


ROLL CAGES AND MOLDINGS

1

2

3

4 5

1 0 9

6

8 7

Mini Mania 13-21

13

ROLL CAGES DESCRIPTION

a. C-STR237SD Front cageb . C-STR247SD Rear Cage no diagonalc. C-STR248SD Rear fixed diagonald . C-STR249SD Rear Cage removable diagonale. C-STR238SD Door bar single

Fiberglass DESCRIPTION

1 . MS101 Two piece fiberglass front end with detachable bonnet. Often used for race or road cars. Brace barsare required for all front ends to retain rigidity.

2 . MS104 Round fronted mini, one piece full front end without any cut outs. Budget specifications. MS103-clubman type square front.

3 . MS106 Pair of brace bars which bolt to front subframe . For rounded front mini shape3a. MS106C For square fronted clubman shape.

4. MS114 Budget quality bonnet skin without lip as per mkI Minis and Vans. No fixings.4a. MS114 Budget quality bonnet skin with lip for molding.4b. MS115 Clubman budget bonnet skin.

5 . MS110 Bootlid double skins or outerskins are unable to be fitted using original fixings. Available in mkI ormkIII design. Bootlid outer skin only mkI- MS110

5a. MS111 Bootlid outer skin only mkIII.5b. MS112 Bootlid inner and outer skin mkI.5c. MS113 Bootlid inner and outer skin mkIII.

6 . MS109 Minivan/Estate one piece rear fiberghlass door with window and seal fitted.

7 . MS139 Boot well to take hollow out of subframe floor, for better aerodynamics on race cars.

8. MS138 Battery box and small lid, with large lid inside car-MS137

9. MS140 Liners to cover inside of doors, done showing weave of carbon fiber.

10. MS141 Rear 1/4� liners, done showing weave in carbon fiber.

11. MS105 Carbon fiber doors, wind up window type.


Grilles

3

5 4

1 3

1 6

1 5

1 4

1 1

1 2

9

1 0

7

8

1

2

Mini Mania 13-23

13

GRILLES DESCRIPTION

1 . 24A2158 Stainless steel Morris Cooper grille. Full top slat internal bonnet release- 24A2159.

2 . 8B12506 Stainless steel grille with 6� lamp hole recess.

3 . DHB10150PME Genuine Rover black grille. Mini Spares black grille- CZH4015MS

4. DHB10150MMM Genuine Rover chrome grille. Mini Spares alloy chrome grill- ALA6654MS.

5. Buttons Red alloy-MS97, Blue alloy-MS97B, Black -MS98, Chrome-MS99, Lightweight aluminum-MS100.

6. 60�s grille 1960�s wavy grille as original per used on the mini mkI has been introduced for later cars 70�s on.If fitting to a car with an internal cable operated bonnet release- 8B12508, Witha finger recessed topslat for manual opening-8B12507.

7. 8B12503 Stainless steel grille with 6� lamp hole when an internal bonnet release is fitted.

8 . 8B12502 Stainless steel grille with 6� lamp hole for manual bonnet release.

9. 24A198 Grille as fitted to austin mkI cooper and �s�.

10. 14A7299 Grille as fitted to austin mkI mini, known as the wavy line grille because of its shape.

11. ALA6669 Bright trim alloy as original where internal bonnet release is used. Stainless steel heavy duty frontgrille where internal bonnet release is used- 8B12505.

12. ALA6668 Genuine alloy grille, maual opening for original mkII and �S�. Stainless steel heavy duty front grillewhen bonnet is opened manually-8B12504.

13. ALA6508 R/H grille molding 1967 mkII on. L/H grille molding 1967 mkII on-ALA6509.

14. ALA6559 Grille top molding 1967 on.

15. 14A7781 Grille moustache molding as fitted to mkI mini pre 1967.

16. 14A7781 R/H end m,olding for mkI moustache. L/H end molding for mkI moustache- 14A7783.

Moustache clips are ADA3583 in stainless steel and pop rivet for the clip RA608076. 3 required per molding.


Dress up Parts

1

2 3

4

5

8 9 1 0

1 1

6

7

1 2

1 3

1 4

1 5

1 6

1 7

1 8

1 9

1 7

1 8

2 1

2 0

Mini Mania 13-25

13

DRESS UP PARTS DESCRIPTION

1 . GWB219 Stainless steel bayonet fitting wiper blades.

2 . 13H5626 Stainless steel bayonet type wiper arm that park on the right hand side, as per all mkI/II to 1970. Alsofits left hand drive mkIII mini�s 1970 on.

3 . 13H5629 Stainless steel bayonet type wiper arm that park on the left hand side, as per all mkIII from 1970 on.LHD mkI/II mini�s to 1970.

4. 37H7738 Eight sided chrome nut that fit the wiper arm slide on to. This is for the 32 tooth wheel box fitted from1970. supplied individually.

5. 37H6316 Six sided chrome nut, fits wiper wheel box, that the wiper arm slides on to. This is for the 22 toothwheel fitted to mkI/II minis.

6. 37H6042C Chrome plated plastic wheel box plinths to replace those dowdy black ones. Comes with a sealingwasher to compliment the wiper arms and blades. Two types are available, complete with nuts. Soldin pairs. (a)Plynth and the six sided nut fitted to mkI/II-37H6042C. (b) Plynth and the eight sided nutas fitted to mkIII from 1970 on.

7. GWW102 Mechanical push button windscreen washer pump as used on Mini�s and MG/Sprites.

8 . GWW801 Chrome twin washer jet with nut fixings.

9. JETS (a)Black plastic jet with two holes for maximum cleaning. 1- nut fixing ideal for mkI/II- MS389. Pushfit as used from 1970 on.-GWW812. (b) Single hole 1- Round locating hole, push fit 1980-GWW804, 2- D shaped locating hole , push fit 1980 on- GWW1080.

10. GWW810 Chrome jet with nut fixing.

11. 8B12396 Stainless steel wiper arm hole plug. Theif proof, correct dome shapel.

12. NB4 Original wood and picket black nylon coated rear nudge bar.

13. NB3 Original wood and picket black nylon coated front nudge bar.

14. NB2 Original wood and picket stainless steel rear nudge bar.

15. NB1 Original wood and picket stainless steel front nudge bar.

16. 14A7270 Stainless steel polka dot pattern kick plates.

17. EBN100010 Set of doorstep sill guards in black plastic with satinless steel insert depicting �Mini�.

18. EBN100040 Set of doorstep sill guards as per 17 but with latest winged motif.

19. 14A7271 Set of stainless steel plain sill guards. (a) stainless steel etched mini cooper text and chequeredpattern. (b) 14A7273 stainless steel etched mini text and chequered pattern.

20. Seams Front pair of seams- 8B12400. Rear pair of seams- 8B12401. In plain metal, front-BMP127MS, rearr/h-BMP124MS, rear l/h-BMP125MS.

21. plastic trim Roll of specially shaped trim for one roof chrome- MT632, black- MT633.


Petrol Tanks and Caps

1

2

3

2

5 d

4a

5a5 b

4 b

6

8

7

9

1 0

1 2

1 1

1

2 3

4

55

Mini Mania 13-27

13

PETROL TANKS AND CAPS DESCRIPTION

1 . 21A2183 Cooper �S� right hand tanks 5.5 gallon fits any mini. (a) carburettor type 21A2183. 9b) fuel injectedtype- 21A2184 (c) standard left hand tank 7.5 gallon- ARP1043.

2 . MS82 (a) whole kit of fitting parts for original tanks- MS83. All parts except with extra parts for fuel injectedparts. MS83.

3 . MSA1126 Dummy neck with special rubber seal.

PETROL CAPSA rang of 1960�s look petrol caps. These are available in chrome or alloy and as a locking cap in alloy. The brass ring that fitsonto the petrol tank neck is only required with the non-locking type and is included with the cap. The brass ring is availableas a separate spare part.

4. The flat type with the large catch is known as the Aston and the Monza has the raised ridge on top. a. ASTON Aston chrome cap with fitting ring. b. ASTON01 Aston alloy cap with fitting ring. c. ASTON02 Aston alloy locking cap. d. ASTON03 Aston chrome locking cap.5.a MONZA Monza chrome cap with fitting ring. b. MONZA01 Monza alloy cap with fitting ring. c. MONZA02 Monza alloy locking cap. d. MONZA03 Monza chrome locking cap.6. COL25 Separate Brass Collar.

7. WLD100310 Chrome petrol locking cap for saloons 70 on.(a) chrome petrol locking capvented pre 1970 and all van/estates- GSS154A.

8 . GSS212A Black petrol locking cap (non vented) for saloons 1970 on..

9. WLD100350 Chrome petrol cap vented.

10. WLD10027 Black petrol cap non vented.

11. MSA1146 Petrol drip guards in various colors.

12. MSA1145 The classic petrol cap fits onto filler neck, and allows locking cap to be underneath.

CARBURETOR DASHPOTS & STUBSTACKS1. R23RED HS4 11/2" SU Red anodized cover

R23BLUE HS4 11/2" SU Blue anodized coverR23 HS4 11/2" SU Polished cover

2. R24RED HIF6/38/44SU Red anodized coverR24BLUE HIF/6/38/44 SU Blue anodized coverR24 HIF6/38/44 SU Ploished cover

3. R22RED HS2 11/4" SU Red anodized coverR22BLUE HS2 11/4" SU Blue anodized coverR22 HS2 11/4" SU Polished cover

4. Substack increases air flow when used in conjunction with K&N filter.K&N Substack for HS2 11/4" filter SS50 HS4 11/2" filter SS51

HS6 13/4" filter SS52HIF6/44 filter SS53

5. MIni Spares own Stubstacks. Greatly increased airflow into carburettor, for performance engines.C-AHT245 Carb stubstacks for HS2 shortC-AHT246 Carb stubstacks for HS2 longC-AHT247 Carb stubstacks for H4/HS4 shortC-AHT248 Carb stubstacks for H4/HS4 long

The HS2 Mini Spares short stubstacks will fit K&N pancake filters.


Gauges

4 1

2

3

6 5

7

8

9

1 1

1 0

1 3

1 2

2 83 3

3 2

3 03 43 12 9

1 9

2 6

1 4

2 7

Mini Mania 13-29

13

GUAGES DESCRIPTION

1 . ADU2341 Speedo 90mph with 3.4 final drive, 140kph with 3.4 final drive- ADU2343, 90mph, with3.76 finla drive -ADU2345.

2 . 134H4442 Speedo 130 mph with 3.4 final drive.3 . 13H4444 Speedo 200kph with 3.4 final drive.4. 24A2702 Original black Cooper �S� speedo housing. (a) oval beading-14A9907, Temp guage, in black-

13H4460, magnolia -13H4460MG.5. S1B120 0-80x100 80mm wide electronic impulse tachometer with chrome bezel and full wiring diagrams,

magnolia S1B 120MG.6. S1B122 0-1000x100 80mm distributor/coil sensed tachometer, magnolia-S1B122MG.7. S1B800 POD for 80mm tachometer black, in chrome-S1B801.8 . S1B220 Voltmeter/Ammeter in nlack, in magnolia-S1B220MG, (a) Ammeter with 60-60 scale-S1B320, in

magnolia-S1B320MG.9. S1B521 Oil pressure guage 0-100lb/in� with connecting pipe for mechanical fittings, for magnolia-S1B521MG10. S1B110 Electronic clock, in magnolia-S1B110MG11. S1B420 Oil temperature guage mechanical fitting, in magnolia S1B420MG.12. S1B422 Water temp 30-110 degrees centigrade with 6�6� capillary mechanical fittings.

In magnolia-S1B422MG.13. S1B130 Dual oil pressure/water temp guage with all fittings, in magnolia-S1B130MG

14. TIM004 Ammeter guage with 60-60 amps grading for use with alternator only. 6 or 12 volt neg or positive.15. TIM005 Water temp guage with 40-120 degre centigrade calibration. with 57� capilary metal tube.16. TIM006 Oil pressure guage 0-100 lbs calibration, copper pipeline and T piece fitting.17. TIM007 Battery voltometer guage, warns you of electrical or charging defects. low battery condition.18. TIM008 Vacuum performance guage, mechanical movements and colored segments indicating perfor-

mance with 0-30 ins/hg scale.19. TIM011 Tachometer with 0-80 RMPx100 scale 80mm (3&1/8�) diameter pod mounted for fitting under

dash. Easy to fit suitable for 4, 6, 8 cylinder with negative earth for petrol engines only.20. TIM014 Tachometer 0-8 RMPx1000 scale. 52mm diameter. Easy to fit suitable for 4, 6, 8 cylinder with

negative earth for petrol engines only.21. TIM023 Chrome bezel to fit all 52mm guages only.22. TIM034 Electrically operated temp guages with 0-12 centigrade scale, for neg earth only.23. TIM039 A dash mounting pod to hold any 52mm guage.24. TIM002 Time clock with second hand. Quartz mechanism, negative earth only.25. LMA017 Adaptor for oil guage if a plastic guage hose i preferred to original metal type.

26. Stewart Warner a. water temp 40-110 centigrade-SWG505, b. oil pressure 0-100lbs scale- SWG506, c. oil temp 40-150 centigrade-SWG509, d. Tachometer 0-100x100 80 mm-SWG511, e. Tachometer 0-100x100stainless steel 80 mm-SWG511ST, f. turbo boost plus/minus 30 psi- SWG527.

27. C-STR1058 80mm mechanical tachometer kit. Driven directly from the end of the camshaft. The most accurateway of counting rpm. Does not get interferred from other signals. 0-10,000 rpm. comes withtacometer, 48� drive cable, mounting boss, special Oldham coupling, cam nut, and relevent screws.

28. OL Five foot plastic oil pipe.29. OAA Angled oil pipe adaptor for fitting in confined spaces to eradicate damaging oil pipe.30. OA Oil guage adaptor for fitting into block or T piece.31. TP T piece for fitting to block enabling oil gauge and switch to be used tgether.

32. HPSI Oil pressure switch that triggers off when oil press. drops below 22lbs. oil pressure ajustable switchthat activates between 15-60lb as required-HPS3. Standard replacement oil switch that activates atabout 7-10lbs-GPS133.

33. DP1 Magnetic sump plug with extension to collect all magnetic debris in the gearbox.

34. TE5 Temperature guage adapter for fitting cylinder head or thermostat housing with take off. Alreadysupplied with TIM guages, but useful for SMITHS and other makes.

35. TIM021 Chrome 52 with single hole. Chrome with two holes-TIM022.


Dashes

3

1

2

4

6

1 0

9

8 7 5

1 1

1 2

1 31 5

1 7

1 8 1 9 2 0 2 1 2 2

Mini Mania 13-31

13

DASHES DESCRIPTION

1 . C-AJJ3330 Dash for right hand drive cars, 3 piece. LHD-C-AJJ3331

2 . C-AJJ3331 Navigators door switch panel rhd. LHD-C-AJJ3333.

3 . Fuse 4 bank fuse holder mounted under dash- C-JJ3334, 2 bank under dash-C-AJJ3335, 3 bank underdash-C-AJJ3336.

4. Wooden Wooden dashes are available in Burr walnut or charcoal grey with 2 or 3 clock holes and rhd or lhd.The 3 clock versions are also available with 3 extra guage holes above the radio blanking cover. 2block Burr dash rhd-DASH003, 2 block burr dash lhd-DASH004, 2 clock charcoal grey dark dashrhd-DASH005, 3+3 extra clock burr walnut dash rhd-DASH006, 3 clock burrwalnut dash lhd-DASH007, 3+3 extra clock burr walnut dash lhd-DASH008, 3clock charcoal grey dash rhd-DASH009, 3+3 extra clock charcoal grey dashrhd-DASH010, 3 clock charcoal grey dash lhd-DASH011, 3+3 extra clockcharcoal grey dash lhd-DASH012.

5. MSA0191 Door and rear side window cappings in Burr walnut. Sold as a set of four only, for grey MSA0200.

6. MSA0192 Door pull handles in burr walnut finish, sold as pairs, for grey-MSA0201.

7. MSA0193 Door opening handles in burr walnut, sold as a set of two, for grey-MSA0202.

8 . MSA0194 Door window winder handle in burr walnut, as a pair, in grey-MSA0203.

9. MSA0195 Handbrake grip in burr walnut, in grey-MSA0204.

10. MSA0196 Gearlever knob in burr walnut, in grey-MSA0205.

11. YSP024 Wooden 4 rockers switch and heater and choke surround in burr walnut, in grey-YSP024GREY,rocker in burr walnut-YSP025, in grey-YSP025GREY.

12. YSP026 For fuel injected models 5 switches surround in burr walnut, in grey-YSP026GREY, 4 switches inburr walnut-YSP027.

13. VISTADASH Plastic dash made for vehicles without air vents, has hole for toggle type switches .

14. DASH001 Dash with central speedo hole and 2 guages per original Coopers made to only fit with wide top dashpads as fitted to all late cars, burr dash. In charcoal grey-DASH002

15. DASH015 Stainless steel dash. Made as per original wooden dash. Dark wooden charcoal grey aroundguages, only available in rhd. 2 clock-DASH015, 3 clock-DASH018, 3+3 extra clock-DASH018.

16. MSA0180 Door and rear side window cappings in charcoal finish with stainless steel inserts, sold as four.

17. MSA0210 Set of two chrome air vent covers. These will enhance any dash board and can be used on either dash

18. 21A 1204 Original early locking choke cable- when twin carbs.19. 21A 1202 Original early mini choke cable.20. 14A 9988 Original early heater control cable.21. CHM 373 Original rubber/ plastic knob heater control cable 1968-1988, (a) rubber/ plastic knob heater

control cable from 1998 when plastic heater valve isfitted-JFF 1000322. 21A 2329 Rubber/plastic twist to lock choke cable.Rubber/plastic ratchet type locking choke cable-SBF 10027.

As above but 31� long for 1300cc onwards- C-AHT 85.23. 21A C-AHT 85 Special accelerator cable-anti friction, nylon inner sleeve, longer for webers and modified cars.24. BAU1924 Complete kit the lever mechanism moving on a plastic base will eradicate any

of the following problems: Broken on/off switch, control knob missing, looks tatty and rattles, hard to operate.

25. DASH0100 Colored dial kits, available in silver,blue,yellow,green,white,magnolia,and red.


Mats and Trims

1

2

3

5

4

6

7

8

9

1 0

Mini Mania 13-33

13

MATS AND TRIMS DESCRIPTION

1. CARPET13 Mini cooper emblem

2. CARPET12 Mini emblem

3. CARPET11 Mini Spares Logo emblem.

4. EAH104380 Rover�s tailored front reversible rubber mats, with mini logo embossed.

5. GAC181 Square rubber mats for the rear.

6. CAT10044 Mudflap with mini cooper laurelemblem.

7. GAC164 With the word mini emblem.

8. CAT100870 With the latest mini logo emblem.

9. CZH798 Bulkhead fire wall sound deadening piece for mk3 cars 1970 onwards.

10. 24A280 Bulkhead fire wall sound deadening piece for mkI/II cars.

11. 47H9615 Bonnet insulation kit, includes four segments to fit in between stiffener supports.

12. Soundproof Complete soundproofing kits to enjoy reduction of road and engine noise on early cars where littlesound deadining material was fitted. MkI/II mini�s except cooper-MS90, mk3 saloon 1970onwards- MS91, Coopers and Cooper �S� mkI/II-MS92, clubman saloon-MS93, clubman estate-MS94, soundproofingkit mini traveller-MS95, Soundproofing kit mini van-MS95M, roll of fireretardent felt-FELT, Tub of adhesive- FELT 860.


Knobs and Pedals

1

2

5 6

3

7

8

8

8

8 8

a

b c

d

e

f g

h

1 7 1 8

1 3 1 4 1 5 1 6

1 9

Mini Mania 13-35

13

KNOBS AND PEDALS DESCRIPTION

1. MSA0196 Burr walnut gear level knob with the latest mini emblem.

2. BG8110 Round alloy gear lever knob.

3. BG8114 Round alloy gear knob with recess to fit emblem.

4. BG2802 Wood and picket emblem, leather gear lever.

5. MCC300 Cooper alloy gear lever knob.

6. 22G110 Original mini gear lever knob pre 1973.

7. BG2602 Wood gear lever knob, without motif placing.

8. BG2702 Leather gear lever knob, without motif placing.

9. Stickers Stick on emblems for recessed gear knobs. Cooper �S�-MSA2002, Union Jack-MSA2004,BMC motif-MSA2008, GT-MSA2006, Austin-MSA2005, Mini-MSA2003, Cooper-MSA2007,5Speed MSA2000.

10. BG8117 Small mini spares gear knob, for recessed-BG8113.

11. BG8116 Medium minispares gear knob, for recessed-BG8111

12. BG8115 Large mini spares gear knob, for recessed-BG8111.

13. SZU10001 Latest clutch and brake heavy duty pedals.

14. GPR107 Original clutch and brake pedal pad, as fitted from 1976 up to the introduction of SZU10001pad.

15. GPR104 Clutch/brake pedal as fitted up to 1976, plus accelerator pad for vehicles 1976 on.

16. GPR105 Accelerator rubber pedal pad for vehicles pre 1976.

17. A200017 Race/Rally alloy pads for clutch and brake, as a pair.

18. A200015 Mini accelerator metal pedal for vehicles pre 1976.

19. A200016 Latest 1997 specification Rover look a like bolt on accelerator pedal for vehicles 1976 on..


Steering Wheels

1

2

4

5

6

7

3 8

81 2

1 21 2

Mini Mania 13-37

13

STEERING WHEELS DESCRIPTION

1 . 23SBLB Black center 3 spoke 12� leather semi dished wheel only.

2 . 23SPLB Polished center 3 spoke 12� semi dished wheel.

3 . 353SPW 13� 3 spoke, semi dished steering wheel with dark wooden rim, polished center

4. 33SBLB Black center 13� 3 spoke with slots, leather semi dished. polished-33SPLB

5. 33SPLBH Classic 1960�s and 1970�s look. 3 spoke 13� with holes, leather semi dished. black center-33SBLBH

6. 34SBLB Black center 4 spoke 13� leather semi dished, Black center 4 spoke 14�-44SBLB.

7. 34SPLB Polished center 4 spoke 13� leather semi dished. 4 spoke 14�-44SPLB

8 . SWAB Boss with horn push facility for vehicles with single indicator stalk pre 1976. Boss with horn pushfacility for vehicles with twin indicator/wash, wipe stalks as fitted from 1976-SWABC.

9. M34M3P? Add following to part number for color, B for black, S for silver, G for gold. Black moulded 3 spokeanodised centerm, with perforated hand grip.

10. M34M366? Add following to part number for color, B for black, S for silver, G for gold. For black rim M34M366?for red rim M34M377?, Blue rim- M34M388?.

11. M34M311? 3 spoke anodised center with leather rim, available in blak, red, blue, white, and grey. For black-M42M311?, Red-M34M322?, Blue-M34M333?, White-M34M355?, Grey-M34M355?

12. SWABM Multi hole adapter kit to fit all M range and mini spares ST range of steering wheels also fits MomoJamex, BBS, Sparco and others.

13. MOTO-LITA Mark 4 with holes 13� flat spoke MLW1111-13, 14� flat spoke-MLW1111-14, 13� dished spoke-MLW1113-13, 14� dished spoke-MLW1113-14.

14. COOPER For mk2 66-69- JCA9001MK2, for mk3 69-76-JCA9001MK3, 1977 on-JCA9001X

15. CLASSIC Hand finished with finger notches carved into the underside. 13� flat spoke-MLW1115-13, 14� flatspoke- MLW1115-14, 13� dished spoke MLW1116-13, 14� MLW1116-14.

16. CLASSIC Mark 3 with slots. 13� flat spoke-MLW1117-13, 14� flat spoke-MLW1117-14, 13� dished spoke-MLW1118-13, 14� dished-MLW1118-14.

17. MCC301 Billet Cooper steering wheel center

18. HORN PUSH Austin-27H6943, Morris-27H6944.

19. BG5101MS Steering column lowering bracket.


Cobra Seats

1 2 3

4 5 6

7 8

Mini Mania 13-39

13

COBRA SEATS DESCRIPTION

In addition of the standard models listed below, there is a range of options and a Cobra Signatureseries available. For further information or ordering of other models, please refer to our website atwww.minimania.com.

1 . CLASSIC CLASSIC01 Black Nylon CLASSIC02 Black Vinyl CLASSIC03 Grey VinylCLASSIC04 Black Leather CLASSIC05 Grey Leather

2 . CUB CUBSEA01 Black Nylon CUBSEA02 Black Vinyl CUBSEA03 Grey VinylCUBSEA04 Black Leather CUBSEA05 Grey Leather

3 . DAYTONA DAY001 Blackrock Fabric with Black Perforated Vinyl Patches. DAY002 BluerockFabric with Black Perforated Vinyl Patches. DAY003 Redrock Fabric with BlackPerforated Vinyl Patches. DAY004 Greyrock Fabric with Black Perforated VinylPatches. DAY005 Black Vinyl all over with no patches. DAY006 Grey Vinyl allover with no patches. DAY007 Black Leather all over with no patches. DAY008Grey Leather all over with no patches

4. EVOLUTION EVOLU01 All Blackrock with Black Perforated Vinyl Patches - Diolen. EVOLU02All Redrock with Black Perforated Vinyl Patches - Diolen. EVOLU03 All Bluerockwith Black Perforated Vinyl Patches - Diolen. EVOLU04 All Greyrock with BlackPerforated Vinyl Patches - Diolen. EVOLU05 All Blackrock with Black PerforatedVinyl Patches - Kevlar. EVOLU06 All Redrock with Black Perforated Vinyl Patches- Kevlar. EVOLU07 All Bluerock with Black Perforated Vinyl Patches - Kevlar.EVOLU08 All Greyrock with Black Perforated Vinyl Patches - Kevlar.

5. IMOLA IMOLA01 Diolen- Black Nylon - Black Perforated Vinyl Patches. IMOLA02Diolen- Black/Red Nylon - Black Perforated Vinyl Patches. IMOLA03 Diolen-Black/Blue Nylon - Black Perforated Vinyl Patches. IMOLA04 Diolen- Black/Green Nylon - Black Perforated Vinyl Patches. IMOLA05 Diolen- Black/Yellow -Black Perforated Vinyl Patches. IMOLA06 Kevlar- Diolen- Black Nylon - BlackPerforated Vinyl Patches. IMOLA07 Kevlar- Black/Red Nylon - Black PerforatedVinyl Patches. IMOLA08 Kevlar- Black/Blue Nylon - Black Perforated VinylPatches. IMOLA09 Kevlar- Black/Green Nylon - Black Perforated Vinyl Patches.IMOLA10 Kevlar- Black/Yellow - Black Perforated Vinyl Patches.

6. LE MANS 1LEMA01 Blackrock Fabric. LEMA02 Bluerock Fabric. LEMA03 Redrock Fabric.LEMA04 Greyrock Fabric. LEMA05 Black Vinyl all over. LEMA06 Grey Vinyl allover. LEMA07 Black Leather all over. LEMA08 Grey Leather all over.

7. MONACO MON001 Black Nylon Fabric with Black Perforated Vinyl Patches. MON002 BlueNylon Fabric with Black Perforated Vinyl Patches. MON003 Red Nylon Fabricwith Black Perforated Vinyl Patches. MON004 Blackrock Fabric with BlackPerforated Vinyl Patches. MON005 Bluerock Fabric with Black Perforated VinylPatches. MON006 Redrock Fabric with Black Perforated Vinyl Patches. MON007Greyrock Fabric with Black Perforated Vinyl Patches. MON008 Black Vinyl allover with no patches. MON009 Grey Vinyl all over with no patches.

8 . MONACO EVO MONEV01 Black/Yellow Nylon Fabric with Black Perforated Vinyl Patches.MONEV02 Red/Black Nylon Fabric with Red Perforated Vinyl Patches. MONEV03 Blue/Red Nylon Fabric with Red Perforated Vinyl Patches.


Cobra Seats

91 0

1 2

1 1

1 41 3

Mini Mania 13-41

13

COBRA SEATS DESCRIPTION

9 . NEW CLUBMAN CLUBM01 Black with Black centers and Black Perforated Vinyl Patches. CLUBM02Black with Blue centers and Black Perforated Vinyl Patches. CLUBM03 Black withRed centers and Red Perforated Vinyl Patches. CLUBM04 Black with Greycenters and Black Perforated Vinyl Patches.

10. ROASTER 7 ROADS01 Black Nylon/Black Nylon Piping. ROADS02 Black Vinyl/Black VinylPiping. ROADS03 Grey Vinyl/Grey Vinyl Piping. ROADS04 Black Leather/BlackPiping. ROADS05 Grey Leather/Grey Piping.

11. SIDEWINDER SIDEW01 Blackrock fabric with Bluerock fabric centers. SIDEW02 Blackrockfabric with Redrock fabric centers. SIDEW03 Blackrock fabric with Greyrockcenters. SIDEW04 Black Leather all over. SIDEW05 Grey Leather all over.

12. SPORTS CAR REC. SPOCAR01 Black Nylon. SPOCAR02 Grey Nylon. SPOCAR03 Black Vinyl. SPOCAR04 Grey Vinyl. SPOCAR05 Black Leather all over. SPOCAR06 Grey Leather allover.

13. SPORTLINE SPORT01 All Blackrock with Black Perforated Vinyl Patches - Diolen. SPORT0 AllRedrock with Red Perforated Vinyl Patches - Diolen. SPORT0 All Blackrock withBlack Perforated Vinyl Patches - Kevlar. SPORT0 All Redrock with Red Perforated Vinyl Patches - Kevlar.

14. SUZUKA SUZUK01 Diolen - All Blackrock with Black Perforated Vinyl Patches. SUZUK02Diolen - All Redrock with Black Perforated Vinyl Patches. SUZUK03 Diolen - AllBluerock with Black Perforated Vinyl Patches. SUZUK04 Kevlar - All Blackrockwith Black Perforated Vinyl Patches. SUZUK05 Kevlar - All Redrock with BlackPerforated Vinyl Patches. SUZUK06 Kevlar - All Bluerock with Black PerforatedVinyl Patches.


Race and Rallying parts

1 2 3

1 0

1 1 9 8

5

6 4 7

1 6

1 5

17

A

1 2

1 31 4

Mini Mania 13-43

13

RACE AND RALLYING PARTS DESCRIPTION

1 . MSA1111 Automatic securon seat belt.

2 . MSA1112 Static securon seat belt.

3 . MSA1114 3 point fixing rally harness, 4 point fixing rally harness- MSA1110

4. C-AJJ3329 This the original copy of the heavy lamp bar fitted to the Abingdon Special Tuning works cars. It issold only as a bar with the 3 chrome brackets.

4a. MSA1101 Budget lightweight version of the above in black powder coated finish.

5. C-AJJ4005 Original works quick lift jacking brackets. Two were fitted to both the front and rear about 12"apart from the center, which meant the car could quickly be raised by an over center quick lift jack asused by Formula One Teams.

6. C-AJJ3381 Original type leather bonnet strap, alloy fastening, and sold complete with screws.

7. 21A1241 Towing Eye hooks, replaces bolt that holds front subframe to front panel.

8 . C-AHT32 Original Special Tuning alloy heavy duty alternator bracket. Only fits Pre A- Plus engines.

9. BG5001MS Seat adjusting bracket. Two per seat.

10. SEAT 08 Seat subframes are not supplied with seats and are available as follows.

11. SEAT 09 Mini tailored seat subframe. Mini tailored seat subframe with locking mechanism to fit floor loops asfitted on late cars.-l/h-SEAT10LEFT, r/h-SEAT10RIGHT

OIL COOLERS, ETC.

12. MOC10ROW 10 row oil cooler.

13. C-ARH221 13 row oil cooler as fitted to Cooper 'S'.

14. C-RO9809 16 row oil cooler for competition use.

15. 21A1794 Original oil cooler brackets to fit on front subframe sold singly. (Checkclearance on latest cars.)

16. C-AHT4-MINI Braided oil cooler pipes, Mini Clubman and specials usually have the longerpipe kit and the standard Mini the shorter pipe kit, all unions included foreasy fitment.MOC100102-CLUBMAN , C-AHT4-MINI

17. P1079 Oil Cooler Shroud for cold weather driving.


Tools

1 2 3

4

5 6 7

8

12

13

91 0

1 2 1 3

1 1

Mini Mania 13-45

13

TOOLS DESCRIPTION

1 . EEZIBLEED Eezibleed, one person brake or clutch bleed kit. Includes container to holdnew fluid, interchangeable caps and pipe which connects to a tire forpressure. With fitting instructions. This kit fits many cars. Ideal forchanging fluid throughout the system, it makes life really easy.

2 . MSA1001 Clik-adjust is a tool made to simplify the job of adjusting valve clearance. Byusing the correct size socket on the tool, clearances can be set by turningthe clik-adjust the amount of turns that correspond to the instructions forthe clearance needed.

3 . GUNNSONO2 Colortune is a glass topped spark plug which allows you to see the color ofthe combustion in the chamber. Colortune takes the guess work out of themixture adjustment because different fuel/air mixtures burn with differentcolors. Kit includes everything you need with instructions and wall chart.

4 . MSA1003 Carbalancer allows both air intakes on twin and twin choke carburettors to bebalanced so they flow exactly the same amount of air. This in turn will giveyou better performance with a smoother engine and better economy.

5 . 660510 Brake adjusting spanner with longer handle for improved leverage has 5/16AF and 1/4AF hexagon closed ends. This will adjust the rear brake shoeson all Minis.

6 . BLM810 Brake adjusting spanner with longer handle for improved leverage has a 5/16AF open end for adjusting front brake shoes where the closed end forthe common sized rear bleed screw.

7 . 18G468MS This tool is required for fitting the chrome or black insert in the windscreenrubber or backlight rubber.

8 . MSA1004 The valve grinding stick is necessary for lapping in the valves whenrebuilding cylinder heads.

9 . UNI-SYN The Uni-syn tool is used to accurately balance twin carbs.

10. 00-3683 The SU tool kit includes instructions and all the special tools to adjust ormaintain the HS2/4.

11. 660220 Valve Spring Compressor for all small cylinder heads.

12. CA40 Box spanner for removing float needle valve.

13. 111-6083 Spanner for adjusting mixture of the HS2/4

14. T20 Vizibleed


Tools

1

23

4

5

10

9

8

7

11

12 13

6

Mini Mania 13-47

13

NO. PART NO. DESCRIPTION

TOOLS

1 . 07-035 A universal scissor type ball joint splitter for swivel pins, upper and lower armball joints plus track rod ends. The professionals tool.

2 . 660330 Suspension rubber cone compressor with two threaded pins, an AF threadedpin for suspension cones made before 1974 and a metric threaded pin forsuspension cones after 1976. Take care on early models, where thesuspension cone might already have been changed to metric, as it is easy tocross-thread the tool. Only the later metric type cone is available from Roveras a spare part.

3 . TOOL07 1.5", 1/2" drive deep socket is specially made for changing swivel pin joints inthe Mini and will also fit the flywheel bolt.

4 . TOOL04 1.5/16", 1/2" drive AF socket for use on the crankshaft bolt and camshaft nutwhen changing timing cover oilseal or timing gears, steering wheel and discbrake hub nuts.

5 . CE12 Two - part primary gear oil seal tool, (known as clutch seal tool). It includesthe sleeve that slides over the primary gear to protect the seal membrane onthe gear splines, plus the outer body that pushes the seal home square. Thisis achieved by using the flywheel bolt in the end and tightening.

6 . 07.001 Fly wheel puller that includes bolts for either early AF or metric type late flywheels.

7 . 18G1240 Inboard CV (pot joint) splitting tool for removing the constant velocity jointfrom the gearbox by way of driving it between them as a wedge. Does notremove joint from driveshaft.

8 . 660490 General purpose wedge type splitter for ball joints.

9 . BLM024 1.5" AF flat spanner tool for the flywheel bolt to change the clutch.

10. 660260 Rear hub puller for extracting rear hub neatly when changing studs, wheelbearings or oil seal.

11. CHM64 Jack, Standard Mini

12. MPT102 Hydraulic Hose Clamp


Books

Mini Mania 13-49

13

Books

103422A The Works Mini107793A SU carb manual111285 Cars of BMC NLC118552 Sports Cars & Competition DrivingBook 52 SU Tuning Tips & Techniques527 �59 - �69 Mini Workshop - Haynes

646 �69 - �93 Mini Workshop - Haynes907073174 Mini Cooper,�61 - �71907073174/2Mini Cooper, �61-�71 2nd edition.94648922 Practical Classics MiniAKD3891 Cooper �S� Drivers HandbookAKD4130 Moke Drivers HandbookAKD4935 Mini Workshop ManualAKM3547 Mini HandbookAKM4694 Metro Workshop Factory ManualAKM639 Mini Workshop, LateAKM6579 Manual Late CooperAKM7168 Mini drivers handbook, lateAKD7347 Mini 850 & 1000AKD4992 Handbook mini mkIIAKD4997 Mini cooper�s and �S� mkIIAKD7347 Mini 850 and 1000AKM4694 Metro Workshop ManualAKM6353 Mini shop man. 80 on.ALT9002 Factory SU Book, 1980 - onALT9201 SU bookALT9322 Factory SU Book, 1930 - 1980ALT9401 SU Needle ChartALT9520 SU reference catalogALT9525 SU workshop manualBKM3362 Handbook late cooper.BKM3575 Owner�s manual pkg #7Book 01 How to Modify Your Mini-David VizardBook 02 D.I.Y. Mini Restoration - Lindsay PorterBook 03 Mini Muscle Cars 61 - 79 - BrooklandsBook05 Flattened FaunaBook 08 �New Cooper Book�Book 09 Rover Heritage TrustBook10 Front wheel drive hp advantageBook11 More about mini.Book12 Roadkill cookbookBook 13 �Celebration of Mini�Book 16 Mini 30 Years On - Rob GoldingBook 17 The Sporting Mini�s - John BrigdenBook 18 Mini Cooper, The Real Thing - John TiplerBook 19 �Mini Down Under�Book 21 Moke Book - BrooklandsBook 22 Vintage Race BookBook 24 High Performance Driving - Bob BondurantBook 25 Tuning the Classic Mini - Clive TrickeyBook27 Race and rally source bookBook28 Piper tuning manualBook 30 Big Mini Book - Johannes HubnerBook 32 Original, Mini Cooper & �S� - John ParnellBook38 How to restore british sportcarsBook 39 Monte Carlo, The Mini Legend

Book 42 A-Z Works Rally Cars - Graham RobsonBook 43 Mini, 35 Years On - Rob GoldingBook 44 Vintage Auto RacingBook 47 Complete Mini By ReeseBook 48 MINI Service Guide 59 - 94Book 49 Brake Handbook - F. PuhnBook 50 Micro & MINI cars buyers guideBook 51 AUSTIN 7 SpecialsBook52 SU tuning tips and techBook 55 Driving in Competition by JohnsonBook 56 Haynes for Weber, SU/Stromberg & ZenithBook 58 Works MINIS, 2nd editionBook 59 Engineer to Win by SmithBook 68 MINI SURVIVAL MANUALBook66 Haynes paint and RepairBook 74 HI-PER MINIS PORTFOLIOBook 77 Tune to win. SmithBook78 Prepare to winBook82 Mini Complete storyBook83 Smith Nuts bolts plumBook84 Mini color family alblumBook87 Mini Gold Portfolio 1981-1997Book88 Mini:The design icon of a generationBook90 How to power tune 1275Book92 How to power tune 948-998Book93 Gold Portfolio Mini 1969-1980Book94 Building preparing and racing your miniBook95 Mini The racing story by John BaggotBoschbook Bosch automotive handbookCWM1004 SU Manual, haynes and various su carbsF732 Tuning the �A� Series Engine David VizardF395 Amazing Mini. Peter FilbyF445 Super profile miniFD3506 Mini service comp. Lindsey Porter.HP46 How to Make Your Car Handle - Fred PuhnMinitech Minitech NewsPamphlet Vintage Racing InformationP111 Mighty Mini - Chris HarveyPUB107 Army Part ManualPST104 Poster Mini vs Sprite

Videos

T352 Mini PowerT365 Mini Across AmericaT363 The Italian JobT360 Mini Wizardry on WheelsT353 The Mini CooperT356 Mini Goes Racing VideoT351 The Mini Video


Keyfobs and Stickers

31 32 33 34

35

36 37 3839

40

1 2 1 31 4 1 5

1 6 1 71 8

1 9

2 0

2 12 2

2 3

2 4 2 5

2 62 7

2 8

2 9 3 0

Mini Mania 13-51

13

KEYFOBS DESCRIPTION

STICKERS CP314 Morris motors chassis plate. CP339 Austin/Morris chassis plate CP343 Engine number plate. CP348 Austin rocker cover plate.

CP350 Weslake rocker cover plate.CP364 Morris rocker cover plate.CP379 Chassis plate mini all MK 1/2.CP422 Chassis plate MK3 Cooper �S�.BP10 Downton rocker cover.ST110 Leyland ST rocker cover labelST113 Negative earth label silver/black.ST115 Negative earth label red.ST120 Cooper air filter sticker.ST126 British Leyland (Logo) (32x40mm)for rocker cover.ST135 Morris rocker coverST136 Austin rocker coverST137 Weslake patentsST153 ST tuning Abingdon badge (green/white)ST154 Healey valve clearance

12. MSA2101 BMC decal on silver background. Square black leather key fob.13. MSA2106 Crossed flags on black leather key fob.14. MSA2108 Austin Seven on black leather key fob.15. MSA2104 Mini Spares go to Monte Carlo key fob.16. MSA2110 Morris Mini Minor on black leather key fob.17. MSA2111 Austin Mini on black leather key fob.18. MSA2113 Mini Minor on tan leather key fob.19. MSA 2100 Wood and Pickett key fob.20a. MSA2102 BMC decal on white background. Pear shape black leather fob.20b. MSA2103 BMC decal on white background. Pear shape tan leather fob.21. MSA2104 Mini Spares goes to Monte Carlo key fob.22. MSA2105 Square key fob bare (to take choice of decal). Black leather only.23. MSA2001 BMC motif stick on emblem.24. MSA2004 Union Jack stick on emblem.25. MSA2006 GT stick on emblem.26. MSA2000 Mini Spares 5 speed stick on emblem.27. MSA2007 Cooper stick on emblem.28. MSA2005 Austin stick on emblem.29. MSA2003 Mini stick on emblem.30. MSA2002 Cooper �S� stick on emblem.31. BADGE01 Union Jack, Body Badge32. PINO8 Lapel Pin, Small Union Jack34. PIN13 Lapel Pin, BMC Drivers Club35. PIN01 Lapel Pin, �Monte Mini 177�36. PIN04 Lapel Pin, �Mini� (choice of Sedan, PU, Van or Wagon various colors.38. PIN07 Lapel Pin, �Prince of Darkness�39. Lapel Pin, Morris Logo


Toys

Mini Mania 13-53

13

TOYS DESCRIPTION

1 . 04420 Mini Egg, 1:36 scale.

2 . 04410 Red union jack, 1:36 scale.

3 . 04412 Charcoal with checkers, 1:36 scale.

4. 04416 Kingfisher blue with checkers, 1:36 scale.

5. 04427 1997 RAC Rally minisport.

6. 61211 Mr Beans mini. Available in 1:43 scale and 1:36 scale.-04419

7. 96951 Classic police van, 1:43 scale.

8 . 06002 AA Classic patrol van, 1:43 scale.

9. 04413 British Racing Green with union jack, 1:36 scale.

10. 05506 Italian Job Set, Italian Job set with coach-36502

11. 06001 Minivan, post office telephones.

12. 08002 Royal mail and post 2 minivan set

13. 06003 Minivan bks air transport.

14. 04424 British gas rally car

tools & a - freebenoit.dc.free.fr/technique/parts/mini13.pdf · tires bonnet and body...

Documents