toolmex workholding catalog - 2010 - lathe · pdf fileorder from logan actuator co. - (815)...
TRANSCRIPT
Precision Scroll ChucksPR
ECIS
ION
SCROLL
CHUCKS
50 PRECISION SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
3 and 4-Jaw Self-Centering Scroll ChucksForged Steel, High Speed
• Extremely accurate and guaranteed to maintain exceptionalaccuracy for an extended period of time
• Chucks have a modern and compact design• Use whenever high precision machining is needed
Chuck Body
• Drop forged of high grade steel then put through precisemachining operations
• All bearing surfaces are carefully hardened and precisely ground
Scroll Plate
• Drop forged of fine quality alloy steel and carefully case hardened• Thread flanks are ground on both sides• Each scroll is balanced
Jaws
• Made of fine alloy steel
Teeth and Guides
• Hardened and fully ground on both sides
Pinions
• Hardened and ground fine alloy steel
Bushings
• Made of fine alloy steel• Hardened ground and the pressed into the pinion seats
Precision grinding of scroll plate and jaw teethallows you to:
• Eliminate the possibility of deformation as a result ofheat treatment
• Reach uniform radial gripping force on all teeth of jaws• Increase guarantee period for high centering accuracy• Increase the gripping force
1. Chuck Body2. Back Cover3. Scroll Plate 7-887-5...4. Pinion 7-886-5...5. Pinion Half Ring 7-888-7...6. Pinion Sleeve 7-888-5..7. Hard Master Jaws 7-885-...8. Hard Top Jaws 7-883-...9. Grease Nipple10. Back Cover Mounting Bolts11. Chuck Mounting Bolts 7-897-...12. Back Cover Locating Pin13. Mounting Bolts14. ChuckWrench 7-889-0...15 and 16. Jaw mounting bolts 7-897-5..
Hardenedand GroundSurfaces
Outstanding Accuracy and Quality
American StandardTongue and Groove Jaws
Bison recommended chuck grease:Part Number 7-799-025
Spare Parts: page 66Backplates: pages 56-60
• Each scroll chuck is assembled and statically balancedto high tolerance levels
• Interstage and final inspections ensure high quality
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
51
PREC
ISION
SCR
OLL
CH
UC
KS
Precision Scroll Chucks
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
ChuckDia
PartNumber
HoleDia
RPMmax
Wtlbs
5" 7-820-0500 1.3976 4800 11
6-1/4" 7-820-0600 1.6535 4500 22
8" 7-820-0800 2.1654 4000 39
10" 7-820-1000 2.9921 3500 55
12-1/2" 7-820-1200 4.0551 2800 110
15-3/4" 7-820-1600 5.3543 2000 187
20" 7-820-2000 7.480 1200 320
25" 7-820-2500 9.921 1000 551
32" 7-820-3200 10.50 450 886
Front View of 20" and 25" ChucksSee page 53 forT-slot Dimensions
3 and 4-Jaw Self-Centering Scroll ChucksForged Steel Body Plain Back Chucks, Backplates Required3 Pinion Design
Front View
Back View
BISON 3-Jaw Scroll Chuckswith Two-Piece Hard Reversible Jaws
Each chuck is provided with:
• 1 Set of hard master jaws• 1 Set of hard top reversible jaws• 1 Chuck wrench• 1 Set of mounting bolts• 2 Hex keys• Eye bolts for chuck sizes15-3/4" diameter and larger
Type 3505
3-Jaw Self-Centering Chuckswith Two-Piece Hard Reversible Jaws
• Steel Body• Less friction between jaw and guide• Greater Clamping Force• Less wear due to direct pressure
PartNumber
Chuck Dia A MaxSpeed
MaxTorqueon Key
GrippingForce Wt Max
ClampingMin
Clamping B C D Emax F G H L P
mm in RPM lbt*ft lbf lbs inches
3-820-2800 700 28 873 516.3 26302.6 738.5 27.5591 3.3465 5.7087 25.9843 24.8031 8.8583 3.2283 8.5827 6xM20 2.3622 0.315
3-820-3600 900 36 679 516.3 28101.1 1245.6 35.4331 5.9055 6.4961 33.4646 31.8898 14.7638 3.2283 8.5827 6xM22 2.3622 0.3150
3-820-4000 1000 40 611 516.3 28101.1 1589.5 39.3701 7.8740 6.4961 37.4016 35.8268 15.3543 3.2283 11.6535 6xM24 2.3622 0.3937
3-820-4800 1200 48 509 516.3 28101.1 2645.5 47.2441 9.4488 7.2835 37.4016 35.8268 15.3543 3.1496 16.9291 6xM24 2.9528 0.3937
3-820-6300 1600 63 382 516.3 28101.1 6172.8 62.9921 9.4488 7.2835 37.4016 35.8268 15.3543 3.1496 16.9291 6xM24 2.9528 0.3937
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Precision Scroll ChucksPR
ECIS
ION
SCROLL
CHUCKS
52 PRECISION SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
BISON 3-Jaw Scroll Chucks with Two Sets of Hard Solid JawsEach chuck is provided with:
• 1 Set of hard solid ID jaws• 1 Set of hard solid OD jaws• 1 Chuck wrench• 1 Set of mounting bolts• 1 Hex key• Eye bolts for chuck sizes15-3/4" diameter and larger
ChuckDia
PartNumber
HoleDia
RPMmax
Wtlbs
4" 7-829-0400 .7874 5200 6.17
5" 7-829-0500 1.3976 4800 11
6-1/4" 7-829-0600 1.6535 4500 22
8" 7-829-0800 2.1654 4000 39
10" 7-829-1000 2.9921 3500 55
12-1/2" 7-829-1200 4.0551 2800 110
BISON 4-Jaw Scroll Chucks with Two-Piece Hard Reversible Jaws
Each chuck is provided with:
• 1 Set of hard master jaws• 1 Set of hard top reversible jaws• 1 Chuck wrench• 1 Set of mounting bolts• 2 Hex keys• Eye bolts for chuck sizes 15-3/4"diameter and larger
ChuckDia
PartNumber
HoleDia
RPMmax
Wtlbs
6-1/4" 7-841-0600 1.6535 4500 22
8" 7-841-0800 2.1654 4000 39
10" 7-841-1000 2.9921 3500 55
12-1/2" 7-841-1200 4.0551 2800 110
15-3/4" 7-841-1600 5.3543 2000 187
20" 7-841-2000 7.480 1200 320
25" 7-841-2500 9.921 1000 551
Type 3504
Type 3705
4-Jaw Self-Centering Chucks withTwo-Piece Hard Reversible Jaws
• Steel Body• Less friction between jaw and guide• Greater Clamping Force• Less wear due to direct pressure
PartNumber
ChuckDiaA
ChuckDiaA
MaxSpeed
MaxTorqueon Key
GrippingForce Wt Max
ClampingMin
Clamping B C D Emax F G H L P
mm in RPM lbt*ft lbf lbs inches
3-841-2800 700 28 873
516.3
26302.6 751.8 27.5591 3.3465 5.7087 25.9843 24.8031 8.8583
3.22838.5827
6xM20
2.36220.31503-841-3200 800 32 764 27651.5 914.9 31.4961 4.9213 6.1024 29.9213 28.7402 10.5512
3-841-3600 900 36 679
28101.1
1256.6 35.4331 5.90556.4961
33.4646 31.8898 14.7638 6xM22
3-841-4000 1000 40 611 1609.3 39.3701 7.874037.4016
35.8268 15.3543
11.65356xM24
0.39373-841-4800 1200 48 509 2711.6 47.24419.4488
7.28353.1496 16.9291 2.9528
3-841-6300 1600 48 382 6327.2 62.9921 7.4803 41.3386 6xM30
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
53
PREC
ISION
SCROLL
CHUCKS
Precision Scroll Chucks
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
L
T-slot Dimensions
BISON 3-Jaw Chuck T-slot Dimensionsfor 20" and 25" Diameter Chucks Only
BISON 3 and 4-Jaw Self-Centering Scroll ChucksPrincipal Dimensions – Back Mounting
ChuckDiaD
F E d C H h
4" 3.2677 2.7559 0.7874 .1181 1.969 -
5" 4.2520 3.7402 1.3976
.1575
2.422 1.575
6-1/4" 5.5118 4.9213 1.6535 2.756 1.693
8" 6.9291 6.2992 2.1654 3.150 1.772
10" 8.8189 7.8740 2.9921
.1969
3.543 2.087
12-1/2" 11.2598 10.2362 4.0551 3.937 2.244
15-3/4" 14.2519 12.9921 5.3543 4.331 2.639
20" 18.0314 16.5354 7.4803 4.685 3.150
25" 23.0709 21.4567 9.9212 .2756 5.079 3.425
32" 14.5000 17.7165 12.5984 .7874 6.2598 2.7559
Backplate Mounting Bolts
PartNumber
ThreadM L No. of
Bolts
7-897-105 M8 x 1.250.98
3
7-897-108 M10 x 1.5
6
7-897-110 M12 x 1.751.18
7-897-112
M16 x 27-897-125 1.57
7-897-584 1-8 6.00
ChuckDia A B C E T-slot
Length
20" .9055" .5512" .2362" .8268" 4.51"
25" 1.1811" .7087" .4724" 1.0236" 5.08"
See page 25 for clamping ranges
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Precision Scroll ChucksPR
ECIS
ION
SCROLL
CHUCKS
DIR
ECT
MOUNT
54 PRECISION SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
Type A2 Type A1
Type A
ChuckDia
PartNumber
TaperSize
HoleDiameter
d
RPMmax
Wtlbs
B(A2)
B1(A1) G C/C1* H h
6-1/4" 7-821-0615 A1-5 1.6535 4500 22 – 2.4374 3.2505 .563 2.6772 1.693
8"7-821-0815 A1-5 1.6535
4000 42– 2.4374 3.2505 .563
3.0709 1.7727-821-0816 A1-6 2.1653 – 3.2500 4.1880 .625
10"7-821-1016 A1-6 2.1653
3500 71– 3.2500 4.1880 .625
3.5039 2.0877-821-1018 A1-8 2.9921 – 4.3750 5.5007 .688
12-1/2"7-821-1226 A2-6 4.0551
2800 1215.2520 – 4.1880 .630
3.7874 2.2447-821-1228 A1-8 3.1496 – 4.3750 5.5007 .688
15-3/4"7-821-1628 A2-8 5.3543
2000 2036.7480 – 5.5007 .709
4.2520 2.6397-821-1629 A1-11 5.1181 – 6.5000 7.7507 .750
20"7-821-2028 A2-8 5.3543
1200 3536.7480 – 5.5007 .709
4.6850 3.0917-821-2029 A2-11 7.4803 9.2520 – 7.7507 .787
25"7-821-2529 A2-11 7.4803
1000 6289.2520 – 7.7507 .750
5.0787 3.4257-821-2530 A2-15 9.9213 13.000 – 11.251 .813
Mounting Bolts M
PartNumber Thread L Qty
7-897-520 7/16-14 2-3/8
37-897-521 7/16-142-3/4
7-897-532 1/2-13
7-897-533 1/2-13 3-1/8
6
7-897-542 5/8-11 2-3/4
7-897-535 1/2-13 4
7-897-543 5/8-11 3-1/8
7-897-550 5/8-114-1/2
7-897-563 3/4-10
7-897-551 5/8-114-3/4
7-897-568 3/4-10
7-897-566 3/4-10 5-5/16
7-897-571 7/8-9 5-1/8
*C=C1, depth of counterbore
L
BISON 3-Jaw, Type A1/A2, Direct Mount Self-Centering Scroll Chuckswith Two Piece Hard Reversible Jaws
• Forged steel body• High speed• Type A1 spindle has a 2 bolt hole pattern,inside (size B1), and outside the taper (size B).Either an A1 or A2 chuck will fit
• Type A2 spindle has 1 bolt pattern, outside the taper(size B) Only an A2 chuck will fit
Type 3515
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
55
PREC
ISION
SCROLL
CHUCKS
DIR
ECT
MOUNT
Precision Scroll Chucks
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
BISON 3-Jaw, Type D, Direct Mount Self-Centering Scroll Chuckswith Two Piece Hard Reversible Jaws
• Forged steel body• High speed• No machining required
ChuckDiaD
PartNumber
TaperSize
HoleDiad
RPMmax
Wtlbs B G C H h
6-1/4"
7-823-0633 D1-3
1.6535 4500 20
2.7795 2.1250.5118
2.6772 1.6937-823-0634 D1-4 3.2520 2.5005
7-823-0635 D1-5 4.1260 3.7505 .5629
8"7-823-0835 D1-5
2.1653 4000 424.1260 3.2505 .5629
3.0719 1.7727-823-0836 D1-6 5.2520 4.1880 .6299
10"7-823-1036 D1-6
2.9921 3500 715.2520 4.1880 .6299
3.5039 2.0877-823-1038 D1-8 6.7480 5.5007 .7087
12-1/2"
7-823-1236 D1-6
4.0551 2800 112
5.2520 4.1880 .62993.7874
2.2447-823-1238 D1-8 6.7480 5.5007 .7087
7-823-1239 D1-11 9.2520 7.7507 .7874 4.3976
15-3/4"7-823-1638 D1-8
5.3543 2000 2236.7480 5.5007 .7087
4.2570 2.6397-823-1639 D1-11 9.2520 7.7507 .7874
20"7-823-2038 D1-8 5.3543
1200 3316.7480 5.5007 .7087
4.6850 3.1507-823-2039 D1-11 7.5984 9.2520 7.7507 .7874
25"7-823-2538 D1-8 5.3543
1000 6046.7480 5.5007 .7087
5.0787 3.4257-823-2539 D1-11 7.4803 9.2520 7.7507 .7874
Camlock Studs
Part Number OD Thread Qty
7-899-103 9/16 M10x13
7-899-104 5/8 M10x17-899-105 3/4 M12x1
6
7-899-105 3/4 M12x17-899-106 7/8 M16x1.5
7-899-106 7/8 M16x1.5
7-899-108 1 M21.5
7-899-106 7/8 M16x1.5
7-899-108 1 M20x1.5
7-899-111 1-3/16 M22x1.5
7-899-108 1 M20x1.5
7-899-111 1-3/16 M22x1.5
7-899-108 1 M20x1.5
7-899-111 1-3/16 M22x1.5
7-899-108 1 M20x1.5
7-899-111 1-3/16 M22x1.5
CamlockSet Screw
Part Number
7-899-305
7-899-310
Type D
Type 3545
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Precision Scroll ChucksPR
ECIS
ION
BACKPL
ATE
S
56 PRECISION SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
BISON Rough-Finished Threaded Backplates for Threaded Spindles
ChuckDia
PartNumber
ThreadM A B C D h E Wt
lbs
4"7-871-041 1-10
1.5352.165 1.01500
4.095 .709 .5000 87-871-042 1-1/2-8 2.677 1.51421
5"7-871-051 1-10
1.5352.165 1.01500
5.079 .709 .5000 107-871-052 1-1/2-8 2.677 1.51421
6-1/4"7-871-062 1-1/2-8 1.535
3.1891.51421
6.535 .787.5000
127-871-063 2-1/4-8 1.791 2.26000 .6260
8"7-871-082 1-1/2-8 1.535
3.5831.51421
8.110 .866.5000 12
7-871-083 2-1/4-8 1.791 2.26000 .6260 13
10"7-871-103 2-1/4-8 1.791
4.1732.26000
10.079 .984.6260 22
7-871-104 2-3/8-6 2.047 2.38500 .7480 25
12-1/2"7-871-124 2-3/8-6
2.047 4.3312.38500
12.638 1.102 .7480 337-871-125 2-3/4-8 2.76000
NOTE: Rough Finished Backplates, see page 61 for mounting instructions
Rough-Finished Threaded Backplates for Threaded Spindles
ChuckDia
PartNumber
ThreadM A B C D h E Wt
lbs
5 3-871-052 1-1/2"-8 1.535 2.677 1.514 5.079 0.709 0.5 9.9
6¼3-871-062 1-1/2"-8 1.535
3.1891.514
6.535 0.7870.5
11.93-871-063 2-1/4"-8 1.791 2.26 0.626
8 3-871-083 2-1/4"-8 1.791 3.583 2.26 8.11 0.866 0.626 13
Type 8206
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
57
PREC
ISION
BACKPLA
TES
Precision Scroll Chucks
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
ChuckDia
PartNumber
ThreadD A C B B1 E Wt
lbs
5"7-922-051 M39 x 4
4.923.00 2.00 .75
.626011
7-922-053 2-3/16 - 10 3.11 1.61 .689
6-1/4" 7-922-063 2-3/16 - 10 6.3 3.11 1.61 .768 13
BISON Fully-Machined Threaded Backplates for Threaded Spindles
NOTE: Part number series 7-922- backplates require some machining on the counterboreprojection, see page 61 for more information
Fully-Machined Type D1 Backplates for Plain Back Chucks
ChuckDia
PartNumber
TaperSize
StudDia No. of Studs Hole Dia
C D G A B B1 Wtlbs
53-878-054 D1-4 5/8 3 2.40 3.25 2.50 4.92 1.02 0.87 5.3
3-878-056 D1-6 7/8 6 3.13 5.25 4.19 7.09 1.61 1.43 11.5
6¼ 3-878-064 D1-4 5/8 3 2.40 3.25 2.50 6.30 1.06 0.71 9.5
83-878-084 D1-4 5/8 3 2.40 3.25 2.50
7.871.06 0.71 15.4
3-878-086 D1-6 7/8 6 4.06 5.25 4.19 1.44 1.26 15.4
103-878-106 D1-6 7/8
64.06 5.25 4.19
9.841.44 0.87 24.3
3-878-108 D1-8 1 5.35 6.75 5.50 1.54 1.36 39.7
12½3-878-126 D1-6 7/8
64.06 5.25 4.19
12.401.56
0.94 39.73-878-128 D1-8 1 5.35 6.75 5.50 1.65
Type 8204
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
PREC
ISIO
NBACKPL
ATE
S
58 PRECISION SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
BISON Semi-Machined and Fully Machined Type D1 Backplates• The number of camlock studs needed varies depending on the spindle size; please refer to the table below• Plain back chucks require backplates which may require machining to fit• Designed for direct mounting on camlock spindle nose
** See mounting instructions on page 61*** The projection on the backplate must be sized to fit each chuck
Fully Machined D1 Backplates
Type 8242Type 8240
ChuckDia
TaperSize
Fully Machined*** Semi-Machined**StudDia
No.of
Studs
HoleDiaC
D GPartNumber
DiaA B B1 Wt
lbsPart
NumberDiaA
FlangeThickness
B
Wtlbs
4" D1-4 7-878-044 3.97 1.12 .87 3.65 – – – – 5/8
3
2.40 3.25 2.50
5"D1-3 7-878-053
4.94 1.02.57
5.3– – – – 9/16 2.02 2.78 2.13
D1-4 7-878-054 .87 – – – – 5/8 2.40 3.25 2.50
6-1/4"
D1-3 7-878-063
6.32
1.06 .71
9.5
7-878-0630
6.38
1.02
9.3
9/16 2.02 2.78 2.13D1-4 7-878-064 1.06 .71 7-878-0640 1.14 5/8 2.40 3.25 2.50
D1-5 7-878-065 1.18 1.0 7-878-0650 1.14 3/4 3.13 4.13 3.25
D1-6 7-878-066 1.44 1.32 – – – – 7/8 4.06 5.25 4.19
D1-8 7-878-068* 1.69 1.53 – – – – 1 4.16 6.75 5.50
8"
D1-3 7-878-083
7.89
1.06 .71
15.4
–
8.00
1.73
27
9/16 2.02 2.78 2.13D1-4 7-878-084 1.06 .71 7-878-0840 1.73 5/8 2.40 3.25 2.50
D1-5 7-878-085 1.18 .71 7-878-0850 1.97 3/4
6
3.13 4.13 3.25
D1-6 7-878-086 1.44 1.26 7-878-0860 1.38 7/8 4.06 5.25 4.19
10"
D1-5 7-878-105
9.86
1.18 .87 24.3 7-878-1050
9.96 1.93 35
3/4 3.13 4.13 3.25D1-6 7-878-106 1.44 .87 24.3 7-878-1060 7/8 4.06 5.25 4.19
D1-8 7-878-108 1.54 1.36 39.7 7-878-1080 1 5.35 6.75 5.50
12-1/2"
D1-6 7-878-126
12.42
1.56 .94
39.7
7-878-1260
12.52
2.76
49
7/8 4.06 5.25 4.19D1-8 7-878-128 1.65 .94 7-878-1280 2.17 1 5.35 6.75 5.50
D1-11 7-878-129 1.85 1.36 7-878-1290 2.17 1-3/16 7.59 9.25 7.75
15-3/4"
D1-6 7-878-166
15.77
1.44
1.10 79
7-878-1660
15.94
2.17
93
7/8 4.06 5.25 4.19D1-8 7-878-168 1.54 7-878-1680 2.76 1 5.35 6.75 5.50
D1-11 7-878-169 1.85 7-878-1690 1.96 1-3/16 7.59 9.25 7.75
20"D1-8 7-878-208
19.701.54
1.14 1327-878-2080
19.881.81
1591 5.35 6.75 5.50
D1-11 7-878-209 1.85 7-878-2090 2.83 1-3/16 7.59 9.25 7.75
25”D1-11 7-878-259
24.821.85
1.14 2327-878-2590 25.00 2.83 232 1-3/16 7.59 9.25 7.75
D1-15 7-878-265* 1.97 – – – – 1-3/8 11.00 13.0 11.25
Precision Scroll Chucks
Semi-Machined D1 Backplates
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Precision Scroll ChucksPR
ECISIO
NBACKPLA
TES
59Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
BISON Semi-Machined and Fully-Machined Type A1/A2 Backplates• For plain back chucks• Designed for direct mounting on A1 and A2 spindle nose• May be used for both scroll and independent chucks• Provided with spindle mounting bolts• See mounting instructions on page 61
Chuck Dia TaperSize
Fully MachinedPart Number ***
Wtlbs
Semi MachinedPart Number **
Wtlbs A B Thru Hole
C D E
5"A-6 7-873-0560* 5.3 7-873-056
6.5 51.02 2.13 5.25 4.19
A-8 – – 7-873-058 1.81 3.15 6.75 5.5
6-1/4" A-5 – – 7-873-065 6.5 6.4 1 3.13 4.125 3.25
8"A-5 7-873-0850* 18 7-873-085 19
7.991.5
2.174.125 3.25
A-6 – – 7-873-086 15.5 1.3 5.25 4.19
10"A-6 – – 7-873-106 38
9.961.3
3.175.25 4.19
A-8 – – 7-873-108 33 1.97 6.75 5.5
12-1/2"A-6 – – 7-873-126 45
12.521.3
4.065.25 4.19
A-8 – – 7-873-128 62 1.77 6.75 5.5
15-3/4"A-8 – – 7-873-168 85
15.941.7
5.366.75 5.5
A-11 7-873-169H 51 7-873-169 141 2.95 9.25 7.75
20"A-11 – – 7-873-209* 133
19.88 1.777.59
9.25 7.75A2-15 7-873-2095 71 – – –
25"
A-11 – – 7-873-259* 158
25
1.77 7.59 9.25 7.75
A-15 7-873-2600 154 7-873-2595 2182.205
11.1 13 11.25
A-20 – – 7-873-2598* 156 16 18.25 16.25
36" 40" 49"A2-15 – – 7-873-3615* 242
21.852.78
7.4813 11.25
A2-20 – – 7-873-3620* 249 3.15 18.25 16.25
* A2 only** Semi Machined backplates should be the first alternative for independent chucks*** Fully Machined backplates supplied with spindle mounting bolts
NOTES: Backplates require some machining on the counterbore projection, see page 61 for more informationThe projection on the backplate must be sized to fit each chuck
Type 8212Type 8210
Semi-MachinedType 8212
Fully MachinedType 8210
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Precision Scroll ChucksPR
ECIS
ION
BACKPL
ATE
S
60 PRECISION SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
Type 8250
Semi-Machined Type A1/A2 Backplates
Designed for direct mounting on A1 and A2 spindle noses• For plain back chucks• Designed for direct mounting on A1 and A2 spindle nose• May be used for both scroll and independent chucks• Provided with spindle mounting bolts• See mounting instructions on page 61
ChuckDia
PartNumber
TaperSize
ThreadDia A B C B1 Wt
lbs
5" 7-879-051 L00 3-3/4"-6 4.92 2.13 2.2 0.71 10
6-1/4"7-879-061 L00 3-3/4"-6
6.322.13 2.2
0.71 137-879-062 L0 4-1/2"-6 2.52 2.6
8"
7-879-081 L00 3-3/4"-6
7.91
2.13 2.2
0.71 227-879-082 L0 4-1/2"-6 2.52 2.6
7-879-083 L1 6"-6 2.99 3.35
10"
7-879-101 L00 3-3/4"-6
9.88
2.13 2.20
0.83 337-879-102 L0 4-1/2"-6 2.52 2.60
7-879-103 L1 6"-6 2.99 3.35
7-879-104 L2 7-3/4"-5 3.50 4.29
12-1/2"
7-879-122 L0 4-1/2"-6
12.44
2.52 2.60
1.10 577-879-123 L1 6"-6 2.99 3.35
7-879-124 L2 7-3/4"-5 3.50 4.29
15-3/4"
7-879-162 L0 4-1/2"-6
15.83
2.52 2.60
1.10 957-879-163 L1 6"-6 2.99 3.35
7-879-164 L2 7-3/4"-5 3.50 4.29
7-879-165 L3 10-3/8"-4 4.02 5.43
20"7-879-204 L2 7-3/4"-5
19.763.50 4.29
1.14 1597-879-205 L3 10-3/8"-4 4.02 5.43
25"7-879-254 L2 7-3/4"-5
24.823.78 4.29
1.38 3977-879-255 L3 10-3/8"-4 4.02 5.43
BISON Fully-Machined Type L Backplates
• For plain back, self-centering chucks• For direct mounting on type L spindle nose• See mounting instructions on page 61
ChuckDia
PartNumber
TaperSize A B C D E Wt
lbs
6¼ 3-873-065 A-5 6.4 1 3.13 4.125 3.25 6.5
83-873-085 A-5
7.991.5
1.504.125 3.25 19
3-873-086 A-6 1.3 5.252 4.19 15.5
103-873-106 A-6
9.961.3
3.170.207 4.19 38
3-873-108 A-8 1.97 6.75 5.50 33
12½3-873-126 A-6
12.521.3
4.065.252 4.19 45
3-873-128 A-8 2.17 6.75 5.50 62
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Precision Scroll ChucksIN
STRUCTIO
NS
FOR
MOUNTIN
GBACKPLA
TES
61Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
WARNING: READ CARFULLY BEFORE MOUNTING BACK PLATES ONTO SPINDLES
Installation Instructions for Mounting Backplates onto SpindlesAll Bison semi-machined and fully machined backplates will have the mounting dimensions for theirrespective spindles fully machined. The fully machined backplates are designed for scroll plain back chucks,which are .030", etc. They can be used on other styles/models, but the existing bolt hole patterns haveto be reviewed for mounting interference.
In all cases, the backplates will have to be finished/machined on the mounting projection, both onthe OD (approximately .030" oversize) and the length.
1. With an indicator check the spindle to see if there is any radial or axial runout.Refer to the chuck manual for spindle nose accuracy.
2. Wipe the protective factory grease off the backplate, then mount it to the respective spindlemaking sure that all fastening components are torqued appropriately.
3. When initially installing the bolts, leave finish tightening to a second pass, and make sure toalternate to the opposite bolt to evenly distribute pressure across the spindle’s taper. Using thedial indicator, recheck the radial and axial backplate runout. If there are major differences,loosen the backplate and refit it.
4. Once the backplate is in place, a technique used to further ensure a close tolerance to thechuck would be to blue the front face of the backplate and take a skim cut. In most casesthis is not required.
5. Next, measure the OD and depth of the counterbore on the backside of the chuck; these willbecome your working dimensions for final sizing. Depending on the size of the chuck, the ODshould be .001" to .005" less than the OD dimension and the length can be approximately .015"to .030" shorter. This minus tolerance will eliminate the possibility of the projection pressingagainst the back of the chuck, which can impact the scroll and create unnecessary friction withthe jaw teeth. This could make it difficult for the wrench to turn the pinions and in turn the jaws.Machine the backplate until a snug fit has been achieved; this may require removing the backplate.
Note: The purpose of this backplate projection to the chuck counterbore is to relievethe stress on the mounting bolts, and is a critical part of maintaining chuck concentricity.
6. The semi-machined backplates recommended for independent chucks do not have mountingholes, and will have to be machined to the chucks bolt hole pattern. Dimensions are availablein the BISON catalog, online at www.toolmex.com, or by calling a customer service representativeat 800-992-4766 or 508-653-8897.
7. Bolt hole patterns may require removal of the backplate for machining. Once machined, followthe procedures from steps 2 and 3 before mounting.
8. Re-indicate the chuck for basic run out on the OD and Face.
9. Take a round piece of ground stock and enclose the jaws. Then, indicate the part for runout atthe jaws, ½ way across its length, and at the end. This will give you an idea of the parametersthat will have to be accounted for part production.
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Precision Scroll ChucksPR
ECIS
ION
SPARE
PARTS
62 PRECISION SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
BISON Hard Master Jaws for 3 and 4-Jaw Steel Scroll Chucks• American Standard Tongue and Groove Jaws• Sold in sets
ChuckDia
3-Jaw 4-Jaw K H G F J S L D E B OALA
ThreadM
3-Jaw 4-JawPart Number inches Wt of Set – lbs
5" 7-885-305 – 5/8 57/64.4996 5/16
.1575
.126
.4724.3150 .3150 .7874
2.1259 5/16-18 0.93 –6-1/4" 7-885-306 7-885-406 3/4 1-1/8
.55112.5590
3/8-161.20 1.60
8" 7-885-308 7-885-408 7/8 1-3/8 .3543 .3937 .9843 3.1740 2.10 2.8010" 7-885-310 7-885-410 1-1/16 1-9/16
.7496 1/2
.6299.4331
.47241.1024 3.6220
1/2-133.20 4.27
12-1/2" 7-885-312 7-885-412 1-1/4 1-7/8 .5000 1.2598 4.3307 5.10 6.8015-3/4" 7-885-316 7-885-416
1-1/2 2-1/4 .2835
.8661 .5906
.5512
1.4173 5.1181 5/8-11 7.30 –20" 7-885-320 7-885-420
1.2598 .62991.5748 6.5351
3/4-1014.4 –
25" 7-885-325 7-885-4251.9685 8.2677
27.1 –32" 7-885-332 –
5" to 10" Diameters
20" Diameter 25" to 32" Diameters12" and 16" Diameters
All solid jaws and masterjaws are manufactured to Bison’s
rigid specifications
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
63
PREC
ISION
SPARE
PARTS
Precision Scroll Chucks
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
ChuckDia M H G J K D E F N C B OAL
A O P3-Jaw 4-Jaw
Wt of Set - lbs5" 5/8 57/64
.4996.35 .59
.3129
.157
.1260
.315 1.516 .866 2.205 .57 1.38 0.93 –6-1/4" 3/4 1-1/8
.43 .71.335 1.634 .984 2.638 .71 1.63 1.20 1.60
8" 7/8 1-3/8 .374 1.713 1.063 3.174 .85 2.01 2.10 2.8010" 1-1/16 1-9/16
.7496
.55 .78
.5004
.472 2.023 1.280 3.740 .96 2.32 3.20 4.2712-1/2" 1-1/4 1-7/8 .512 2.165 1.457 4.331 1.04 2.68 5.10 6.8015-3/4"
1-1/2 2-1/4.71 1.0
.2480.532 2.539 1.654
5.0001.06 3.01 7.30 –
20".87 1.3
.689 2.933 1.654 1.97 3.46 14.40 –25" .827 3.228 2.047 2.01 3.50 27.10 –
ChuckDia
3-Jaw 3-JawEnhanced Serration
4-Jaw
Part Number5" 7-883-305 – –
6-1/4" 7-883-306 – 7-883-4068" 7-883-308 – 7-883-40810" 7-883-310 7-883-3100 7-883-410
12-1/2" 7-883-312 7-883-3120 7-883-41215-3/4" 7-883-316 7-883-3160 7-883-41620" 7-883-320 7-883-3120 7-883-42025" 7-883-325 7-883-3250 7-883-425
BISON Hard Top Jaws for 3 and 4-Jaw Steel Scroll Chucks• American Standard Tongue and Groove Jaws• Sold in sets
Jaw Mounting BoltsSee page 48
Note: Hard Top Jaws are Interchangeable with Bison® Top Jaws
Hard Top Jaws for 3-Jaw Scroll Chucks• American Standard Tongue and Groove Jaws• Sold in 3 piece sets
ChuckDia
PartNumber M H G J K L D E F N1 N2 C B A O P Q Wt
lbs
6¼ 3-883-306 0.7480 1.12600.4996 0.4173 0.6496
0.43310.3126
0.15750.1181
0.3150 0.3543 1.6142 0.9843 2.6378 0.7047 1.6063 0.8268 0.12
8 3-883-308 0.8740 1.3799 0.5118 0.3543 0.3937 1.7717 1.0630 3.1496 0.8465 2.0079 0.9449 0.16
10 3-883-310 1.0630 1.5669
0.74960.5394 0.8268
0.5512
0.5000
0.4528 0.4921 2.0276 1.2992 3.8189 0.9724 2.3228 1.0039 0.28
12½ 3-883-312 1.2500 1.8740 0.5906 0.4921 0.5315 2.1654 1.4567 4.3307 1.0354 2.6811 1.1024 0.41
15¾ 3-883-316 1.5000 2.2500 0.6890 1.0236 0.7283 0.2362 0.5315 0.5709 2.5394 1.6535 5.0000 0.9567 2.9724 1.2795 0.61
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Precision Scroll ChucksPR
ECIS
ION
SPARE
PARTS
64 PRECISION SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
ChuckDia
3-Jaw 4-Jaw C L B F E N P O Hard Solid JawsWt of Set - lbs
Part Number inches 3-Jaw 4-Jaw
4" 7-881-304 – 1.2598 1.6535 .5906 .2362 .2362 .2756 1.063 .433 .58 –
5" 7-881-305 – 1.5748 2.0079 .7874 .3150.3150
.3150 1.319 .512 1.2 –
6-1/4" 7-881-306 7-881-406 2.0866 2.7559 .7874 .3150 .3937 1.772 .748 2.4 3.2
8" 7-881-308 7-881-408 2.1260 3.3465 .9843 .3543 .3937 .4724 2.244 .906 3.2 4.3
10" 7-881-310 7-881-410 2.4803 4.1339 1.1024 .4331.4724
.5512 2.736 1.102 5.2 7.0
12-1/2" 7-881-312 7-881-412 2.8740 4.9213 1.2598 .5000 .7087 3.268 1.358 8.7 12
15-3/4" 7-881-316 – 3.6220 5.7087 1.4173 .5906
.5512
.8661 3.898 1.417 16 –
20" 7-881-320 – 3.9370 7.0866 1.5748.6299
1.0236 4.705 1.969 22 –
25" 7-881-325 – 4.3307 8.8583 1.9685 1.1024 5.866 2.598 38 –
BISON I.D. Hard Solid Jaws for 3 and 4-Jaw Steel Scroll Chucks• Sold in sets
ChuckDia
3-Jaw 4-Jaw C L B F E N P O Hard Solid JawsWt of Set - lbs
Part Number inches 3-Jaw 4-Jaw
4" 7-880-304 – 1.2598 1.6535 .5906 .2362 .2362 .2756 1.063 .433 .58 –
5" 7-880-305 – 1.5748 2.0079 .7874.3150 .3150
.3150 1.319 .512 1.2 –
6-1/4" 7-880-306 7-880-406 2.0866 2.7559 .7874 .3937 1.772 .748 2.4 3.2
8" 7-880-308 7-880-408 2.1260 3.3465 .9843 .3543 .3937 .4724 2.244 .906 3.2 4.3
10" 7-880-310 7-880-410 2.4803 4.1339 1.1024 .4331.4724
.5512 2.736 1.102 5.2 7.0
12-1/2" 7-880-312 7-880-412 2.8740 4.9213 1.2598 .5000 .7087 3.268 1.358 8.7 12
15-3/4" 7-880-316 – 3.6220 5.7087 1.4173 .5906
.5512
.8661 3.898 1.417 16 –
20" 7-880-320 – 3.9370 7.0866 1.5748.6299
1.0236 4.705 1.969 22 –
25" 7-880-325 – 4.3307 8.8583 1.9685 1.1024 5.866 2.598 38 –
BISON O.D. Hard Solid Jaws for 3 and 4-Jaw Steel Scroll Chucks• Sold in sets
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
65
PREC
ISION
SPARE
PARTS
Precision Scroll Chucks
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
ChuckDia
3-Jaw 4-JawC L B F E N P O
Soft Solid JawsWt of Set - lbs
Part Number 3-Jaw 4-Jaw
4" 7-882-304 – 1.2598 1.6535 .5906 .2362 .2362 .2756 1.063 .433 .86 –
5" 7-882-305 – 1.5748 2.0079.7874 .3150 .3150
.3150 1.319 .512 1.7 –
6-1/4" 7-882-306 7-882-406 2.0866 2.7559 .3937 1.772 .748 3.3 4.4
8" 7-882-308 7-882-408 2.1260 3.3465 .9843 .3543 .3937 .4724 2.244 .906 5.3 7.1
10" 7-882-310 7-882-410 2.4803 4.1339 1.1024 .4331.4724
.5512 2.736 1.102 9.0 12
12-1/2" 7-882-312 7-882-412 2.8740 4.9213 1.2598 .5000 .7087 3.268 1.358 13 17
15-3/4" 7-882-316 – 3.6220 5.7087 1.4173 .5906
.5512
.8661 3.898 1.417 16 –
20" 7-882-320 – 3.9370 7.0866 1.5748.6299
1.0236 4.705 1.969 33 –
25" 7-882-325 – 4.3307 8.8583 1.9685 1.1024 5.866 2.598 57 –
BISON Soft Solid Jaws for 3 and 4-Jaw Steel Scroll Chucks• Sold in sets
ChuckDia Part Number A B C D E F G H I J
BoltSizeM
Wtper Pclbs
5" 7-884-305 2.520 0.866 1.520
.3129
0.5910 1-1/4
.500
1.000
.1260.283
5/16-18 .66
6-1/4" 7-884-306 3.071 1.000 1.634 0.8386 1-1/2 1.3393/8-16
1.01
8" 7-884-308 3.543 1.063 1.713 0.9488 1-3/4 1.575 1.43
10" 7-884-310 4.173 1.280 2.028
.5000
1.0827 2-3/16
.750
1.7721/2-13
2.54
12-1/2" 7-884-312 4.724 1.457 2.165 1.2087 2-1/2 2.087
.2480
3.53
15-3/4" 7-884-316 5.512 1.654 2.539 1.3443
3 2.480 .406
5/8-11 4.85
20" 7-884-320 5.512 1.654 2.9331.3543 3/4-10
5.29
25" 7-884-325 6.299 2.047 3.288 9.26
BISON Soft Top Jaws for 3 and 4-Jaw Steel Scroll Chucks• American Standard Tongue and Groove Jaws• Sold by piece
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Precision Scroll ChucksPR
ECIS
ION
SPARE
PARTS
66 PRECISION SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
Pinion**
PartNumber D H Wt
lbs
7-886-304 0.98 1.4 0.12
7-886-505 0.98 1.44 0.13
7-886-506 1.1 1.57 0.18
7-886-508 1.2 1.99 0.37
7-886-510 1.4 2.36 0.44
7-886-512 1.5 2.85 0.71
7-886-516 1.7 3.66 1.3
7-886-5202
4.45 2.1
7-886-525 5.24 2.5
ChuckDia
Scroll**
Part Number D H Wtlbs
4" 7-887-304 2.74 0.49 0.34
5" 7-887-505 3.7 0.63 0.84
6-1/4" 7-887-506 4.88 0.83 2.03
8" 7-887-508 6.24 0.94 3.62
10" 7-887-510 7.82 1.1 4.54
12-1/2" 7-887-512 10.1 1.2 10.2
15-3/4" 7-887-516 12.9 1.3 22.7
20" 7-887-520 16.4 1.2 36.4
25" 7-887-525 21.3 1.6 66.0
BISON Spare Parts for 2, 3, and 4-Jaw Chuckswith Forged Steel Body
** For steel body chucks only with 5" thru 25"* Pinion screw
BISON Enhanced Serration Jaws for Universal and Precision Scroll Chucks• Jaw gripping surfaces serration 1/8"• Sold in sets• Jaws are recommended for heavymachining applications
ChuckDia
PartNumber
10" 7-883-3100
12-1/2" 7-883-3120
15-3/4" 7-883-3160
20" 7-883-3200
25" 7-883-3250
32" 7-883-3250
D = OD DiameterH = HeightL = OAL
Pinion Sleeve
PartNumber ID
– –
7-888-505 0.98
7-888-506 1.1
7-888-508 1.2
7-888-510 1.4
7-888-512 1.5
7-888-516 1.7
7-888-5202
7-888-525
Half Ring
PartNumber D
7-888-904* –
7-888-705 1.52
7-888-706 1.72
7-888-708 1.85
7-888-710 1.94
7-888-712 2.17
7-888-716 2.42
7-888-720 2.76
7-888-725 2.95
BISON Extended and Standard Length Wrenches*
ChuckDia
SquareSize
Extended Length
PartNumber L
4".3543
– –
5" – –
6-1/4".4331
7-889-008L8.5
8"
10".5512
12-1/2" 7-889-012L
15-3/4" .6693 – –
20"
.7480
– –
25" – –
32" – –
* Wrenches are spring loadedfor the operator’s safetyRemoval of the spring is notrecommended and may voidchuck warranty
Standard Length
PartNumber L
7-889-005 3.15
7-889-008 3.94
7-889-012 4.72
7-889-016
5.517-889-025
7-889-032
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
2, 3, and 4-Jaw Universal Self-Centering Scroll Chucks• These chucks can be used on all types of lathes, and on different kinds of milling,drilling, and CNC attachments
• Chucks come with either American Standard two-piece tongue and groove jaws,or two sets of hard solid jaws, one OD and one ID
• Plain Back and Direct Mount• Semi-steel body• Chuck body is made of high quality cast ironAll guideways and bearing surfaces are precisely machined
• Scroll plate is drop forged of fine alloy steel, and carefully case hardenedThread flanks are ground on both sides
• The jaw’s teeth and guideways are hardened and fully ground on both sides• Pinions are hardened and ground
1. Chuck Body2. Back Cover3. Scroll Plate 7-887-3...4. Pinion 7-886-3...5. Pinion Screw 7-888-9...6. Hard Master Jaws 7-885-3...7. Hard Top Jaws 7-883-3...8. Grease Nipple9. Chuck Mounting Bolts 7-897-...10. Back Cover Mounting Bolts11. ChuckWrench 7-889-0...12 and 13. Jaw Mounting Bolts 7-897-5...
1. Chuck Body2. Back Cover3. Scroll Plate 7-887-3...4. Pinion 7-886-3...5. Pinion Screw 7-888-9...6. Hard Solid ID Jaws 7-881-...7. Hard Solid OD Jaws 7-880-...8. Grease Nipple9. Chuck Mounting Bolts 7-897-...10. Back Cover Mounting Bolts11. ChuckWrench 7-889-0...
32" Diameter ChuckSee page 93
Chucks with Two-PieceReversible Jaws
Chucks with Two Sets ofHard Solid Jaws, OD and ID
Spare Parts: See page 92Backplates: See pages 78-85
Universal Scroll ChucksUNIV
ERSA
LSC
ROLL
CHUCKS
67Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LSC
ROLL
CHUCKS
68 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
BISON 3-Jaw Scroll Chuckswith Two-Piece Hard Reversible Jaws
Chucks are provided with:
• 1 Set of hard master jaws• 1 Set of hard top reversible jaws• 1 Chuck wrench• 1 Set of mounting bolts• 2 Hex keys• Eye bolts for chuck sizes 15-3/4"and larger
2, 3, and 4-Jaw Universal Self-Centering Scroll Chucks• Semi-steel body• 3 Pinion design• Plain back chucks• Backplates required
Front View
Back View
ChuckDia
PartNumber
HoleDia
Max HoleEnlargement
RPMmax
Wtlbs
5" 7-800-0500 1.2598 1.2598 3200 11
6-1/4" 7-800-0600 1.6535 1.8110 3000 22
8" 7-800-0800 2.1653 2.5591 2500 39
10" 7-800-1000 2.9921 3.4646 2000 55
12-1/2" 7-800-1200 4.0551 4.3307 1500 110
15-3/4" 7-800-1600 5.3543 5.5906 1000 187
20" 7-800-2000 7.4803 8.2283 700 320
25" 7-800-2500 9.9213 11.9291 500 551
32" 7-800-3200 10.5120 12.7953 300 886
3-Jaw Scroll Chucks with Two-Piece Hard Reversible JawsChucks are provided with:
• 1 Set of hard master jaws• 1 Set of hard top reversible jaws• 1 Self-ejecting chuck wrench• 1 Set of mounting bolts• 2 Hex keys• Eye bolts provided with 12-1/2"and 15-3/4" chucks
Type 3205
Chuck Dia Part Number Hole Dia RPM max Wt lbs
6-1/4" 3-800-0600 1.7717 3000 19.4
8" 3-800-0800 2.5591 2500 34
10" 3-800-1000 3.1496 2000 57
12-1/2" 3-800-1200 4.0945 1500 104
15-3/4" 3-800-1600 5.3543 1200 157
Chuck Lifting Eye Bolt12-1/2" and 15-3/4" only
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
69
UNIV
ERSA
LSC
ROLL
CHUCKS
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
BISON 3-Jaw Scroll Chucks with Hard Solid Jaws
ChuckDia
PartNumber
HoleDia
Max HoleEnlargement
RPMmax
Wtlbs
3-1/4" 7-810-0300 .6299 .6299 4000 3.3
4" 7-810-0400 .7874 .7874 3500 6.17
5" 7-810-0500 1.2598 1.2598 3200 11
6-1/4" 7-810-0600 1.6535 1.8110 3000 22
8" 7-810-0800 2.1653 2.5591 2500 39
10" 7-810-1000 2.9921 3.4646 2000 55
12-1/2" 7-810-1200 4.0551 4.3307 1500 110
15-3/4" 7-810-1600 5.3543 5.5906 1000 187
20" 7-810-2000 7.4803 8.2283 700 320
25" 7-810-2500 9.9213 11.9291 500 551
Chucks are provided with:
• 1 Set of hard solid ID jaws• 1 Set of hard solid OD jaws• 1 Chuck wrench• 1 Set of mounting bolts• 2 Hex keys• Eye bolts for chuck sizes 15-3/4"and larger
Type 3204
3-Jaw Scroll Chucks with Hard Solid Jaws
Chucks are provided with:
• 1 Set of hard solid ID jaws• 1 Set of hard solid OD jaws• 1 Self-ejecting wrench• 1 Set of mounting bolts• 1 Hex key for mounting bolts• Eye bolts for chuck sizes 12-1/2"and 15-3/4"
Chuck Dia Part Number Hole Dia RPM max Wt lbs
6-1/4" 3-810-0600 1.7717 3000 19.4
8" 3-810-0800 2.5591 2500 34
10" 3-810-1000 3.1496 2000 57
12-1/2" 3-810-1200 4.0945 1500 104
15-3/4" 3-810-1600 5.3543 1200 157
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LSC
ROLL
CHUCKS
70 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
BISON 2-Jaw Scroll Chucks with Soft Top Reversible Jaws2 Pinion design
Chucks are provided with:
• 1 Set of hard master jaws• 1 Set of soft top reversible jaws• 1 Chuck wrench• 1 Set of mounting bolts• 2 Hex keys• Semi-steel body• Eye bolts for chuck size 15-3/4"
ChuckDia
PartNumber
HoleDia
Max HoleEnlargement
RPM*max
Wtlbs
6-1/4" 7-830-0600 1.6535 1.8110 3000 22
8" 7-830-0800 2.1654 2.5591 2500 39
10" 7-830-1000 2.9921 3.4646 2000 55
12-1/2" 7-830-1200 4.0551 4.3307 1500 110
15-3/4" 7-830-1600 5.3543 5.5906 1000 187
2, 3 and 4-Jaw Universal Self-Centering Scroll Chucks• Semi-steel body• Plain back chucks• Backplates required
BISON 4-Jaw Scroll Chucks with Hard Solid Jaws3 Pinion design
ChuckDia
PartNumber
HoleDia
Max HoleEnlargement
RPMmax
Wtlbs
5" 7-840-0500 1.2598 1.2598 3200 11
6-1/4" 7-840-0600 1.6535 1.8110 3000 22
8" 7-840-0800 2.1654 2.5591 2500 39
10" 7-840-1000 2.9921 3.4646 2000 55
12-1/2" 7-840-1200 4.0551 4.3307 1500 110
15-3/4" 7-840-1600 5.3543 5.5906 1000 187
20" 7-840-2000 7.480 8.2283 700 320
25" 7-840-2500 9.921 11.9291 500 551
ChuckDia
PartNumber
HoleDia
Max HoleEnlargement
RPMmax
Wtlbs
5” 7-845-0500 1.2598 1.2598 3200 11
6-1/4” 7-845-0600 1.6535 1.8110 3000 22
8” 7-845-0800 2.1654 2.5591 2500 39
10” 7-845-1000 2.9921 3.4646 2000 55
12-1/2” 7-845-1200 4.0551 4.3307 1500 110
15-3/4” 7-845-1600 5.3543 5.5906 1000 187
20” 7-845-2000 7.480 8.2283 700 320
Chucks are provided with:
• 1 Set of hard master jaws• 1 Set of hard top reversible jaws• 1 Chuck wrench• 1 Set of mounting bolts• 2 Hex keys• Semi-steel body• Eye bolts for chuck sizes 15-3/4"and larger
Chucks are provided with:
• 1 Set of hard solid ID jaws• 1 Set of hard solid OD jaws• 1 Chuck wrench• 1 Set of mounting bolts• 1 Hex key• Semi-steel body• Eye bolts for chuck sizes 15-3/4"and larger
*RPM max is rated for round workpiece ONLY
BISON 4-Jaw Scroll Chucks with Two-Piece Hard Reversible Jaws3 Pinion design
Type 3105
Type 3605
Type 3604
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
71
UNIV
ERSA
LSC
ROLL
CHUCKS
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
CH h
ødøD
øF
øE
M
ChuckDiaD
F E d C H h h1
3-1/4" 2.6378 2.2047 0.6299 0.1181 1.732 - 0.512
4" 3.2677 2.7559 0.7874 0.1181 1.969 - 0.669
5" 4.252 3.7402 1.2598 0.1575 2.205 1.575 0.787
6-1/4" 5.5118 4.9213 1.6535 0.1575 2.539 1.693 1.26
8" 6.9291 6.2992 2.1654 0.1575 2.953 1.772 1.142
10" 8.8189 7.874 2.9921 0.1969 3.347 2.087 1.339
12-1/2" 11.2598 10.2362 4.0551 0.1969 3.701 2.244 1.693
15-3/4" 14.2519 12.9921 5.3543 0.1969 4.134 2.639 2.165
20" 18.0314 16.5354 7.4803 0.1969 4.724 3.15 2.362
25" 23.0709 21.4567 9.9212 0.2756 5.315 3.425 2.756
32" see page 93
Backplate Mounting Bolts
PartNumber
ThreadM L No. of
Bolts
7-897-103 M6 x 1
0.98
37-897-105 M8 x 1.25
7-897-108 M10 x 1.5
6
7-897-110 M12 x 1.751.18
7-897-112
M16 x 27-897-125 1.57
7-897-132 see page 93
BISON Principal Dimensions for 2-Jaw Chucks – Back Mounting
BISON Principal Dimensions for 3 and 4-Jaw Chucks – Back Mounting
Principal Dimensions 3-Jaw Chucks
ChuckDiaD
F E d C HTop Jaws
h Width
6-1/4" 5.5118 4.9213 1.6535 .1575 2.756 1.697 1.575
8" 6.9291 6.2992 2.1654 .1575 3.150 1.776 1.575
10" 8.8189 7.8740 2.9921 .1969 3.543 2.071 1.850
12-1/2" 11.2598 10.2362 4.0551 .1969 3.937 2.240 2.047
15-3/4" 14.2519 12.9921 5.3543 .1969 4.331 2.598 2.047
Backplate Mounting Bolts
PartNumber
ThreadM
No. ofBolts
7-897-108 M10 x 1.5
67-897-110 M12 x 1.75
7-897-112M16 x 2
7-897-125
see page 25 for clamping ranges for 3 and 4-Jaw Bison chucks
ChuckDia D
EF d H h C Bolt
Size M(H7)
6-1/4" 4.9213 5.5118 1.7717 2.5591 1.73230.1575 6xM10
8" 6.2992 6.9291 2.5591 2.9528 1.8504
10" 7.8740 8.8189 3.1496 3.1496 2.1457
0.1969
6xM12
12-1/2" 10.2362 11.2598 4.0945 3.5433 2.30316xM16
15-3/4" 12.9921 14.2520 5.3543 3.9370 2.6378
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LSC
ROLL
CHUCKS
72 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
BISON 3-Jaw, Type A1 and A2, Direct Mount Chuckswith Two Piece Hard Reversible Jaws
• Semi-steel body• Type A1 spindle has a 2 bolt hole pattern, inside and outside the taper. Either an A1 or A2 chuck will fit• Type A2 spindle has a 1 bolt pattern outside the taper. Only an A2 chuck will fit
ChuckDiaD
PartNumber
TaperSize
HoleDiad
Max HoleEnlargement
RPMmax
Wtlbs
B(A2)
B1(A1) G C/C1 H h
6-1/4'' 7-801-0615 A1-5 1.6535 1.8110 3000 22 – 2.4374 3.2505 0.563 3.2087 1.693
8''7-801-0815 A1-5 1.6535
2.5591 2500 42– 2.4374 3.2505 0.563
3.5827 1.7727-801-0816 A1-6 2.1653 – 3.2500 4.188 0.625
10''
7-801-1015 A2-5 2.9921 2.9921
2000 71
4.1260 – 3.2505 0.563
4.0748 2.0877-801-1016 A1-6 2.16353.4646
– 3.2500 4.188 0.625
7-801-1018 A1-8 2.9921 – 4.3750 5.5007 0.688
12-1/2''7-801-1216 A2-6 4.0551 4.0551
1500 1215.2520 – 4.188 0.63
4.6338 2.2447-801-1218 A1-8 3.1496 4.3307 – 4.3750 5.5007 0.688
15-3/4''
7-801-1616 A2-6 4.0551 4.0551
1000 203
5.2520 – 4.188 0.63
5.0591 2.6397-801-1618 A2-8 5.3543 5.3543 6.7480 – 5.5007 0.709
7-801-1619 A1-11 5.1181 5.5906 – 6.5000 7.7507 0.75
20'' 7-801-2029 A2-11 7.5905 7.5905 700 353 9.2520 – 7.7507 0.787 5.748 3.091
25''7-801-2511 A2-11
7.48037.5905
500 6289.2520 – 7.7507 0.75
6.496 3.4257-801-2515 A2-15 11.00 13.000 – 11.251 0.813
32'' 7-801-3220 A2-20 12.598 12.598 300 847 18.25 – 16.252 0.8661 7.0866 3.425
Chuck Mounting Bolts
PartNumber Thread L No. of
Bolts
7-897-521 7/16-14 2-3/4
37-897-522 7/16-143-1/8
7-897-533 1/2-13
7-897-524 7/16-14 4-1/8
6
7-897-534 1/2-13 3-1/2
7-897-545 5/8-11 3-1/2
7-897-537 1/2-13 4-3/4
7-897-548 5/8-11 4-1/4
7-897-552 1/2-13 5
7-897-552 5/8-11 5
7-897-564 3/4-10 4-1/4
7-897-567 3/4-10 6
7-897-569 3/4-10 7
7-897-574 7/8-9 6
7-897-584 1-8 6
Type A
Type A1 MountBolt Hole Pattern
L
Type A2 MountBolt Hole Pattern
Type 3215
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
73
UNIV
ERSA
LSC
ROLL
CHUCKS
DIR
ECT
MOUNT
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
3-Jaw Chucks, Type A1 and A2, Direct Mount
2-Piece Hard Reversible Jaws
• All chucks with A1 mount can be installedon A1 spindle nose only
• All chucks with A2 mount can be installed on eitherA1 or A2 spindle noses
Standard Parts
• 2-Piece hard reversible jaws• 1 Self-ejecting wrench• 1 Set of mounting bolts• 1 Hex key for mounting bolts• 1 Hex key for jaw bolts• Eye bolts provided with 12-1/2" and 15-3/4" chucks
Type A1 Mount Bolt Hole Pattern Type A2 Mount Bolt Hole Pattern
ChuckDia D
PartNumber
TaperSize
HoleDia d
B(A2)
B1(A1) G C H h
Chuck Mounting Bolts RPMmax
WtlbsThread L Qty
6-1/4" 3-801-0615 A1-5 1.6535 – 2.4374 3.2504 0.5630 3.2087 1.6929 7/16-14 2-3/4
3
3000 22
8"3-801-0815 A1-5 1.6535 – 2.4374 3.2504 0.5630
3.6220 1.85047/16-14
3-1/8 2500 423-801-0816 A1-6 2.1654 – 3.2500 4.1880 0.6250 1/2-13
10"
3-801-1015 A2-5 2.9921 4.1260 - 3.2504 0.5630
3.8976 2.1457
7/16-14
4-1/8
6
2000713-801-1016 A1-6 2.1654 – 3.2500 4.1880 0.6250 1/2-13
3-801-1018 A1-8 2.9921 – 4.3750 5.5008 0.6880 5/8-11
12-1/2"3-801-1216 A2-6 3.9370 5.2520 - 4.1880 0.6303
4.4094 2.30311/2-13 4-3/4
1500 1213-801-1218 A1-8 3.1496 – 4.3750 5.5008 0.6880 5/8-11 4-3/16
15-3/4" 3-801-1619 A1-11 4.9213 – 6.5000 7.7507 0.7500 4.8031 2.6378 3/4-10 4-1/4 1000 203
Type A
Spindle Nose
L
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
UNIV
ERSA
LSC
ROLL
CHUCKS
DIR
ECT
MOUNT
74 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
Universal Scroll Chucks
ChuckDiaD
PartNumber
TaperSize
HoleDiad
Max HoleEnlargement
RPMmax
Wtlbs B G C H h
Camlock Studs
Dia Thread No. ofStuds
5" 7-803-0534 D1-4 1.2598 1.2598 3200 11 3.2520 2.5005 .5118 2.7559 1.575 5/8 M10 x 1
36-1/4"
7-803-0633 D1-31.6535 1.9685 3000 20
2.7795 2.1250.5118 3.2087 1.693
9/16M10 x 1
7-803-0634 D1-4 3.2520 2.5005 5/8
8"
7-803-0833 D1-3 2.0275 2.0275
2500 42
2.7795 2.1250.5118
3.5827 1.772
9/16 M10 x 1
7-803-0834 D1-4
2.1653
2.3622 3.2520 2.5005 5/8 M10 x 1
7-803-0835 D1-52.5591
4.1260 3.2505.5629
3/4 M12 x 1
6
7-803-0836 D1-6 5.2520 4.1880 7/8 M16 x 1.5
10"
7-803-1035 D1-5
2.9921
2.9921
2000 71
4.1260 3.2505 .5629
4.0748 2.087
3/4 M12 x 1
7-803-1036 D1-63.4646
5.2520 4.1880 .6299 7/8 M16 x 1.5
7-803-1038 D1-8 6.7480 5.5007 .7087 1 M20 x 1.5
12-1/2"
7-803-1236 D1-6
4.0551
4.0551
1500 112
5.2520 4.1880 .6299 4.6338
2.244
7/8 M16 x 1.5
7-803-1238 D1-84.3307
6.7480 5.5007 .7087 4.6338 1 M20 x 1.5
7-803-1239 D1-11 9.2520 7.7507 .7874 5.5118 1-3/16 M22 x 1.5
15-3/4"
7-803-1636 D1-6 4.0551 4.0551
1000 223
5.2520 4.1880 .6299
5.0591 2.639
7/8 M16 x 1.5
7-803-1638 D1-85.3543
5.3543 6.7480 5.5007 .7087 1 M20 x 1.5
7-803-1639 D1-11 5.5906 9.2520 7.7507 .7874 1-3/16 M22 x 1.5
20"7-803-2038 D1-8 5.3543 5.3543
700 3316.7480 5.5007 .7087
5.7480 3.1501 M20 x 1.5
7-803-2039 D1-11 7.5984 7.5984 9.2520 7.7507 .7874 1-3/16 M22 x 1.5
25" 7-803-2539 D1-11 7.5984 11.9291 500 604 9.2520 7.7507 .7874 6.4960 3.425 1-3/16 M22 x 1.5
BISON 3-Jaw, Camlock Type D1, Direct Mount Chuckswith Two-Piece Jaws
• Semi-steel body
Type D
Type 3245
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LSC
ROLL
CHUCKS
DIR
ECT
MOUNT
75Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
2-Piece Hard Reversible Jaws
Standard Parts
• 2-Piece hard reversible jaws• 1 Self-ejecting wrench• 1 Set of mounting bolts• 1 Hex key for mounting bolts• 1 Hex key for jaw bolts• Eye bolts provided with 12-1/2" and 15-3/4" chucks
3-Jaw Chucks, Camlock Type D1, Direct Mount
ChuckDia D
PartNumber
TaperSize
HoleDia d F G C H h
Camlock Studs RPMmax
WtlbsDiameter Thread Qty M
6-1/4" 3-803-0634 D1-4 1.7717 3.2520 2.5005 0.5118 3.0709 1.7323 5/8 M10x1 3 3000 20
8"3-803-0834 D1-4
2.16543.2520 2.5005
0.5118 3.6220 1.85045/8 M10x1 3
2500 423-803-0836 D1-6 5.2520 4.1880 7/8 M16x1.5 6
10"3-803-1036 D1-6
3.14965.2520 4.1880 0.6299
3.8976 2.14577/8 M16x1.5
6
2000 713-803-1038 D1-8 6.7480 5.5007 0.7087 1 M20x1.5
12-1/2"3-803-1236 D1-6
3.93705.2520 4.1880 0.6299
4.4094 2.30317/8 M16x1.5
1500 1123-803-1238 D1-8 6.7480 5.5007 0.7087 1 M20x1.5
15-3/4"3-803-1638 D1-8
5.35436.7480 5.5007 0.7087
4.8031 2.63781 M20x1.5
1000 2233-803-1639 D1-11 9.2520 7.7507 0.7874 1-3/16 M22x1.5
Type D
Spindle Nose
D1-6 to D1-11 D1-4
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LSC
ROLL
CHUCKS
DIR
ECT
MOUNT
76 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
TaperSize Dia No. of
StudsCamlock Studs Metric
Thread Part Number
D1-3 9/16"3 M10 x 1
7-899-103
D1-4 5/8" 7-899-104
D1-5 3/4"
6
M12 x 1 7-899-105
D1-6 7/8" M16 x 1.5 7-899-106
D1-8 1" M20 x 1.5 7-899-108
D1-11 1-3/16" M22 x 1.5 7-899-111
D1-15 1-3/8" M24 x 1.5 7-899-115
BISON Camlock Studs with Inch and Metric Threads and Set Screwsfor Type D1 Direct Mount Chucks
• Sold by piece
NOTE: Always use metricthreaded studswith BISON chucks
Set Screw
Part Number
7-899-305
7-899-310
Camlock Studs English
Thread Part Number
7/16 - 207-899-403
7-899-404
1/2 - 20 7-899-405
5/8 - 18 7-899-406
3/4 - 16 7-899-408
7/8 - 14 7-899-411
– –
BISON 3-Jaw, Type L, Direct Mount Chucks with Two-Piece Jaws• Semi-steel body
ChuckDiaD
PartNumber
TaperSize
HoleDiad
Max HoleEnlargement
RPMmax
ThreadT G J C H h Wt
lbs
6-1/4"7-804-0641 L00
1.6535 1.8110 30003-3/4 - 6 2-3/4 .5512 2.1260 4.0551
1.693 237-804-0642 L0 4-1/2 - 6 3-1/4 .5906 2.5197 4.4488
8"
7-804-0841 L00
2.1654
2.50
2500
3-3/4 - 6 2-3/4 .5512 2.1260 4.3701
1.772 427-804-0842 L02.5591
4-1/2 - 6 3-1/4 .5906 2.5197 4.7638
7-804-0843 L1 6 - 6 4-1/8 .6299 2.9921 5.2362
10"
7-804-1042 L0
2.9921
2.9921
2000
4-1/2 - 6 3-1/4 .5906 2.5197 5.0394
2.087 647-804-1043 L13.4646
6 - 6 4-1/8 .6299 2.9921 5.5118
7-804-1044 L2 7-3/4 - 5 5-1/4 .8661 3.5039 6.0236
12-1/2"
7-804-1242 L0
4.05514.0551
1500
4-1/2 - 6 3-1/4 .5906 2.5197 5.3937
2.244 1347-804-1243 L1 6 - 6 4-1/8 .6299 2.9921 5.8661
7-804-1244 L2 4.3307 7-3/4 - 5 5-1/4 .8661 3.5039 6.3780
15-3/4"7-804-1643 L1
4.0551 4.0551 10006 - 6 4-1/8 .6299 2.9921 6.1811
2.639 2517-804-1644 L2 7-3/4 - 5 5-1/4 .8661 3.5039 6.6929
Type L
Type 3255
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LSC
ROLL
CHUCKS
DIR
ECT
MOUNT
77Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
BISON 3-Jaw, Threaded, Direct Mount Chucks• Semi-steel body
Diameter: 4" Only Diameters: 5" thru 12.5"
ChuckDiaD
ThreadT
PartNumber
HoleDiad
RPMmax* G k H h h1 Wt
lbs
4"
1 - 10 7-805-0451
.7874 3500
1.0150
1/2 3.543 –
.669
8.81-1/8 - 12W** 7-805-0455 1.250
1-1/2 - 8 7-805-0452 1.5150
5"1 - 10 7-805-0551
1.2598 32001.0150
1/23.740
1.575–
121-1/2 - 8 7-805-0552 1.5150 3.740
6-1/4"1-1/2 - 8 7-805-0652
1.5748 30001.5150 1/2 4.134
1.693–
232-1/4 - 8 7-805-0653 2.2600 5/8 4.331
8"
1-1/2 - 8 7-805-0852
2.1653 2500
1.5150 1/2 4.528
1.772
–
452-1/4 - 8 7-805-0853 2.2600 5/8 4.724
2-3/8 - 6 7-805-0854 2.3850 3/4 4.922
10" 2-1/4 - 8 7-805-1053 2.9921 2000 2.2600 5/8 5.512 2.087 – 75
12-1/2" 2-3/8 - 6 7-805-1254 4.0551 1500 2.3850 3/4 5.906 2.244 – 121
NOTES: Prior to ordering a threaded mount chuck, please check the spindle nosediameter "G" and dimension "k". Depending on the lathe manufacturer,these dimensions may vary slightly from those specified in the above chart
Metric threads are often confused with traditional threads;please use thread pitch gage to confirm exact pitch prior to ordering
See page 21 for spindle dimensions
** 1-1/8 - 12W is a Whitworth thread
Threaded
Type 3285 / 3284
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LBACKPL
ATE
S
78 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
ChuckDia A = F D D1 D3 D2 E (H7) Dx (k5) S* Sx** C
3-1/4" 2.6378 3.1496 3.1693 0.0252 2.2835 2.2047 2.20470.0787 0.0984 0.1181
4" 3.2677 3.3970 3.95670.3307
2.8346 2.7559 2.7559
5" 4.2520 4.9213 4.9409 3.8189 3.7402 3.7402
0.1181 0.1378 0.15756-1/4" 5.5118 6.2992 6.3189 0.4134 5.0000 4.9213 4.9213
8" 6.9291 7.8740 7.9134 0.5118 6.3780 6.2992 6.2992
10" 8.8189 9.8425 9.8819
0.6693
7.9528 7.8740 7.8740
0.1575 0.1772 0.196912-1/2" 11.2598 12.4016 12.4409 10.3150 10.2362 10.2362
15-3/4" 14.2520 15.7480 15.8268 13.1102 12.9221 12.9221
20" 18.0315 19.6850 19.7638 16.6535 16.5354 16.5354
25" 23.0709 24.8031 24.9213 21.5748 21.4567 21.4567 0.2362 0.2559 0.2756
32" 14.5000 – – – 17.7170 17.7170 – – – 0.7874
BISON Rough Backplates for Scroll Chucks with Threaded Spindles
ChuckDia
PartNumber D d D1 K L Wt
lbs
3" 7-870-105
5.20 .713.46 .98 2.20
4.44" 7-870-105
5" 7-870-105
6-1/4" 7-870-106 6.70.98
12
8" 7-870-108 8.30 4.02 1.18 2.83 22
10" 7-870-110 10.24 1.57 4.53 1.26 3.54 34
12-1/2" 7-870-112 12.30 1.97 6.77 1.26 4.02 66
15-3/4" 7-870-116 16.34 2.76 9.06 2.17 4.92 154
25" 7-870-125 25.20 4.72 11.81 3.35 7.09 496
Principal Mounting Dimensions for Toolmex Backplates
Type 8205
• After selecting a suitable backplatefor the lathe, mount it onto the spindlenose of the lathe
• Proper mounting is very important inorder to secure concentricity betweenthe lathe’s spindle and the chuck
• The back of the lathe chuck has acounterbore diameter, E, finished inH7 class, with depth, C
• Prior to maching the backplate,accurately measure the chuck’scounterbore diameter, E, and depth, C
• A good press fit, H6/k5, is most desirable• To ensure satisfactory concentricity,it is important that this procedure isdone accurately
* S = length of the boss of the supplied backplate** Sx = length of the boss after machining
See full back plate machininginstructions on page 61
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
79
UNIV
ERSA
LBACKPLA
TES
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
Rough Backplates for Scroll Chucks with Threaded Spindles
BISON Semi-Finished Threaded Backplates for Threaded Spindles
Mounting Instructions:see page 61
ChuckDia
ThreadM
PartNumber A B C D h E Wt
lbs
4"1-10 7-871-041
1.5352.165 1.01500
4.095 .709 .5000 81-1/2-8 7-871-042 2.677 1.51421
5"1-10 7-871-051
1.5352.165 1.01500
5.079 .709 .5000 101-1/2-8 7-871-052 2.677 1.51421
6-1/4"1-1/2-8 7-871-062 1.535
3.1891.51421
6.535 .787.5000
122-1/4-8 7-871-063 1.791 2.26000 .6260
8"1-1/2-8 7-871-082 1.535
3.5831.51421
8.110 .866.5000 12
2-1/4-8 7-871-083 1.791 2.26000 .6260 13
10"2-1/4-8 7-871-103 1.791
4.1732.26000
10.079 .984.6260 22
2-3/8-6 7-871-104 2.047 2.38500 .7480 25
12-1/2"2-3/8-6 7-871-124
2.047 4.3312.38500
12.638 1.102 .7480 332-3/4-8 7-871-125* 2.76000
Type 8206
ChuckDia
ThreadM
PartNumber A B C D h E Wt
lbs
5" 1-1/2"-8 3-871-052 1.535 2.677 1.514 5.079 0.709 0.5 9.9
6-1/4"1-1/2"-8 3-871-062 1.535
3.1891.514
6.535 0.7870.5
11.92-1/4"-8 3-871-063 1.791 2.26 0.626
8" 2-1/4"-8 3-871-083 1.791 3.583 2.26 8.11 0.866 0.626 13
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LBACKPL
ATE
S
80 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
BISON Fully Machined Threaded Backplatesfor Bison Plain Back Self-Centering Chucks
NOTE: Part number series 7-922-backplates require some machining on the counterboreprojection, see page 61 for more information
ChuckDia
ThreadD
PartNumber A C B B1 E Wt
lbs
3-1/4" 3/4 - 16 7-922-035 3.15 – .6299 .6299 .1969 4
4"
1 - 10 7-922-043
3.941.97
1.50 .551
.5000
51-1/8 - 12W 7-922-045 .5630
1-1/2 - 8 7-922-046 2.36 .5000
5"M39 x 4 7-922-051
4.923.00 2.00 .75
.6260 112-3/16 - 10 7-922-053 3.11 1.61 .689
6-1/4" 2-3/16 - 10 7-922-063 6.3 3.11 1.61 .768 .6260 13
Type 8204
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
81
UNIV
ERSA
LBACKPLA
TES
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
ChuckDia
TaperSize
Fully Machined Backplates*** Semi-Machined Backplates**StudDia
No.of
Studs
HoleDiaC
D GPartNumber
DiaA B B1 Wt
lbsPart
NumberDiaA
FlangeThickness
Wtlbs
4" D1-4 7-878-044 5.97 1.02 .87 3.65 – – – – 5/8
3
2.40 3.25 2.50
5"D1-3 7-878-053
4.94 1.02.57
5.3– – – – 9/16 2.02 2.78 2.13
D1-4 7-878-054 .87 – – – – 5/8 2.40 3.25 2.50
6-1/4"
D1-3 7-878-063
6.32
1.06 .71
9.5
7-878-0630
6.38
1.02
9.3
9/16 2.02 2.78 2.13
D1-4 7-878-064 7-878-06401.14
5/8 2.40 3.25 2.50
D1-5 7-878-065 1.18 1.0 7-878-0650 3/4
6
3.13 4.13 3.25
D1-6 7-878-066 1.44 1.32 – – – – 7/8 4.06 5.25 4.19
D1-8 7-878-068 1.69 1.53 – – – – 1 4.06 6.75 5.50
8"
D1-3 7-878-083
7.89
1.06.71
15.4
–
8.00
–
27
9/163
2.02 2.78 2.13
D1-4 7-878-084 7-878-0840 1.73 5/8 2.40 3.25 2.50
D1-5 7-878-085 1.18 7-878-0850 1.97 3/4
6
3.13 4.13 3.25
D1-6 7-878-086 1.44 1.26 7-878-0860 1.38 7/8 4.06 5.25 4.19
10"
D1-5 7-878-105
9.86
1.18.87
24.3 7-878-1050
9.96 1.93 35
3/4 3.13 4.13 3.25
D1-6 7-878-106 1.44 24.3 7-878-1060 7/8 4.06 5.25 4.19
D1-8 7-878-108 1.54 1.36 39.7 7-878-1080 1 5.35 6.75 5.50
12-1/2"
D1-6 7-878-126
12.42
1.56.94
39.7
7-878-1260
12.52
2.76
49
7/8 4.06 5.25 4.19
D1-8 7-878-128 1.65 7-878-12802.17
1 5.35 6.75 5.50
D1-11 7-878-129 1.85 1.36 7-878-1290 1-3/16 7.59 9.25 7.75
15-3/4"
D1-6 7-878-166
15.77
1.44
1.10 79
7-878-1660
15.94
2.17
93
7/8 4.06 5.25 4.19
D1-8 7-878-168 1.54 7-878-1680 2.76 1 5.35 6.75 5.50
D1-11 7-878-169 1.85 7-878-1690 1.96 1-3/16 7.59 9.25 7.75
20"D1-8 7-878-208
19.701.54
1.14 1327-878-2080
19.881.81
1591 5.35 6.75 5.50
D1-11 7-878-209 1.85 7-878-2090 2.83 1-3/16 7.59 9.25 7.75
25"D1-11 7-878-259 24.82 1.85 1.14 232 7-878-2590 25.00 2.83 232 1-3/16 7.59 9.25 7.75
D1-15 7-878-265 24.82 1.97 1.14 232 – – – – 1-3/8 11.00 13.0 11.25
Type 8240 Type 8242
BISON Semi-Machined and Fully Machined Type D1 Backplates• The number of camlock studs needed varies depending on the spindle size, please refer to the table below• Plain back chucks require backplates which may require machining• Designed for direct mounting on camlock spindle nose
Fully Machined D1 Backplates Semi-Machined D1 Backplates
** See mounting instructions on page 61***The projection on the backplate must be sized to fit each chuck
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LBACKPL
ATE
S
82 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
Fully Machined Type D1 Backplates
ChuckDia
TaperSize
PartNumber
StudDia
No. ofStuds
Hole DiaC D G A B B1 Wt
lbs
5"D1-4 3-878-054 5/8 3 2.40 3.25 2.50 4.92 1.02 0.87 5.3
D1-6 3-878-056 7/8 6 3.13 5.25 4.19 7.09 1.61 1.43 11.5
6-1/4" D1-4 3-878-064 5/8 3 2.40 3.25 2.50 6.30 1.06 0.71 9.5
8"D1-4 3-878-084 5/8 3 2.40 3.25 2.50
7.871.06 0.71 15.4
D1-6 3-878-086 7/8 6 4.06 5.25 4.19 1.44 1.26 15.4
10"D1-6 3-878-106 7/8
6
4.06 5.25 4.199.84
1.44 0.87 24.3
D1-8 3-878-108 1 5.35 6.75 5.50 1.54 1.36 39.7
12-1/2"D1-6 3-878-126 7/8 4.06 5.25 4.19
12.401.56 0.94
39.7D1-8 3-878-128 1 5.35 6.75 5.50 1.65 0.94
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
83
UNIV
ERSA
LBACKPLA
TES
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
BISON Semi-Machined and Fully Machined Type A1/A2 Backplates• For plain back chucks• Designed for direct mounting on A1 and A2 spindle nose• May be used for both scroll and independent chucks• See mounting instructions on page 61
Semi-MachinedType 8212
Fully MachinedType 8210
ChuckDia
TaperSize
Fully Machined*** Semi-Machined** A B D E
Part Number ThruHole C
Wtlbs Part Number Thru
Hole CWtlbs
5"A-6 7-873-0560* 3.13 5.3 7-873-056 2.13
6.5 51.02 5.25 4.19
A-8 – – – 7-873-058 3.15 1.81 6.75 5.5
6-1/4" A-5 – – – 7-873-065 3.13 6.5 6.4 1 4.125 3.25
8"A-5 7-873-0850* – 18 7-873-085 3.13 19
7.991.5 4.125 3.25
A-6 – – – 7-873-086 4.06 15.5 1.3 5.25 4.19
10"A-6 – – – 7-873-106 4.06 38
9.961.3 5.25 4.19
A-8 – – – 7-873-108 5.35 33 1.97 6.75 5.5
12-1/2"A-6 – – – 7-873-126 4.06 45
12.521.3 5.25 4.19
A-8 – – – 7-873-128 5.35 62 1.77 6.75 5.5
15-3/4"A-8 – – – 7-873-168 5.35 85
15.941.7 6.75 5.5
A-11 7-873-169H 7.59 51 7-873-169 7.59 141 2.95 9.25 7.75
20"A-11 – – – 7-873-209* 7.59 133
19.88 1.77 9.25 7.75A2-15 7-873-2095 11.08 71 – – –
25"
A-11 – – – 7-873-259* 7.59 158
25
1.77 9.25 7.75
A-15 7-873-2600 11.08 154 7-873-2595 11.08 2182.205
13 11.25
A-20 – – – 7-873-2598* 16 156 18.25 16.25
36" 40" 49"A2-15 – – – 7-873-3615* 11.08 242
21.852.78 13 11.25
A2-20 – – – 7-873-3620* 16 249 3.15 18.25 16.25
* A2 only** Semi Machined backplates should be the first alternative for independent chucks*** Fully Machined backplates supplied with spindle mounting bolts
NOTES: Backplates require some machining on the counterbore projection, see page 61 for more informationThe projection on the backplate must be sized to fit each chuck
Type 8212Type 8210
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll Chucks
84 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
UNIV
ERSA
LBACKPL
ATE
S
Type 8250
Semi-Machined Type A1/A2 Backplates
ChuckDia
TaperSize
PartNumber A B C D E Wt
lbs
6-1/4" A-5 3-873-065 6.4 1 3.13 4.125 3.25 6.5
8"A-5 3-873-085 7.99 1.5 1.50 4.125 3.25 19
A-6 3-873-086 7.99 1.3 1.50 5.252 4.19 15.5
10"A-6 3-873-106 9.96 1.3 3.17 0.207 4.19 38
A-8 3-873-108 9.96 1.97 3.17 6.75 5.50 33
12-1/2"A-6 3-873-126 12.52 1.3 4.06 5.252 4.19 45
A-8 3-873-128 12.52 2.17 4.06 6.75 5.50 62
BISON Fully Machined Type L Backplates• For plain back self-centering chucks• For direct mounting on type L spindle nose• See mounting instructions on page 61
ChuckDia
TaperSize
PartNumber
ThreadDia A B C B1 Wt
lbs
5" L00 7-879-051 3-3/4 - 6 4.92 2.13 2.2 0.71 10
6-1/4"L00 7-879-061 3-3/4 - 6
6.322.13 2.2
0.71 13L0 7-879-062 4-1/2 - 6 2.52 2.6
8"
L00 7-879-081 3-3/4 - 6
7.91
2.13 2.2
0.71 22L0 7-879-082 4-1/2 - 6 2.52 2.6
L1 7-879-083 6 - 6 2.99 3.35
10"
L00 7-879-101 3-3/4 - 6
9.88
2.13 2.20
0.83 33L0 7-879-102 4-1/2 - 6 2.52 2.60
L1 7-879-103 6 - 6 2.99 3.35
L2 7-879-104 7-3/4 - 5 3.50 4.29
12-1/2"
L0 7-879-122 4-1/2 - 6
12.44
2.52 2.60
1.10
39
L1 7-879-123 6 - 6 2.99 3.3557
L2 7-879-124 7-3/4 - 5 3.50 4.29
15-3/4"
L0 7-879-162 4-1/2 - 6
15.83
2.52 2.60
1.10 95L1 7-879-163 6 - 6 2.99 3.35
L2 7-879-164 7-3/4 - 5 3.50 4.29
L3 7-879-165 10-3/8 - 4 4.02 5.43
20"L2 7-879-204 7-3/4 - 5
19.763.50 4.29
1.14 159L3 7-879-205 10-3/8 - 4 4.02 5.43
25"L2 7-879-254 7-3/4 - 5
24.823.78 4.29
1.38 397L3 7-879-255 10-3/8 - 4 4.02 5.43
NOTE: Backplates require somemachining on the counterboreprojection, see page 61 formore information
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
85
UNIV
ERSA
LBACKPLA
TES
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
ChuckDia
TaperSize
Fully Machined Backplate Semi-Machined BackplateStudDia
No.of
StudsG B
HoleDiad
PartNumber
DiaA K Wt
lbsPart
NumberDiaA
FlangeThickness
L
Wtlbs
5" C-2 7-921-052 4.94 .579 5.3 – – – – - 0 2.480 1.654 1.59
6-1/4"C-4 7-921-064
6.32 .83 9.5– – – – .768 3 3.25 2.50 2.40
C-5 7-921-065 7-921-0650 6.38 1.14 9.3 .768 4 4.125 3.25 3.13
8"
C-4 7-921-084
7.89 .83 15
– – – – .768 3 3.25 2.50 2.40
C-5 7-921-085 7-921-08508.00
1.9727
.768 4 4.125 3.25 3.13
C-6 7-921-086 7-921-0860 1.38 .846 4 5.25 4.19 4.06
10"C-5 7-921-105
9.86 .83 247-921-1050
9.96 1.93 35.768 4 4.125 3.25 3.13
C-6 7-921-106 7-921-1060 .846 4 5.25 4.19 4.06
12-1/2"
C-6 7-921-126
12.42 1.30 40
7-921-1260
12.52
2.76
49
.846 4 5.25 4.19 4.06
C-8 7-921-128 7-921-1280 2.17 1.063 4 6.75 5.50 5.35
C-11 7-921-129 7-921-1290 2.17 1.339 6 9.25 7.75 7.59
15-3/4"C-8 7-921-168
15.77 1.30 807-921-1680
15.942.76
931.063 4 6.75 5.50 5.35
C-11 7-921-169 7-921-1690 1.96 1.339 6 9.25 7.75 7.59
20"C-8 7-921-208
19.70 1.34 132–
––
–1.063 4 6.75 5.50 5.35
C-11 7-921-209 – – 1.339 6 9.25 7.75 7.59
25" C-11 7-921-259 24.82 1.65 231 7-921-2590 25.00 2.83 232 1.339 6 9.25 7.75 7.59
BISON Type C, DIN 55027 Spindle Backplates
TaperSize
PartNumber
StudDiainch
StudDiamm
Threadmm
No.of
Studs
C-4 7-921-904 .7677 19.5 M10 - 39 3
C-5 7-921-905 .7677 19.5 M10 - 43
4C-6 7-921-906 .8465 21.5 M12 - 50
C-8 7-921-908 1.063 27.0 M16 - 60
C-11 7-921-911 1.339 34.0 M20 - 75 6
Type 8232Type 8230
BISON DIN Studs
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LSP
ARE
PARTS
86 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
BISON Hard Master Jaws for 2, 3 and 4-Jaw Self-Centering Scroll Chucks• American Standard Tongue and Groove Jaws• Sold in sets
ChuckDia
2-Jaw 3-Jaw 4-Jaw
Part Number
5" – 7-885-305 7-885-405
6-1/4" 7-885-206 7-885-306 7-885-406
8" 7-885-208 7-885-308 7-885-408
10" 7-885-210 7-885-310 7-885-410
12-1/2" 7-885-212 7-885-312 7-885-412
15-3/4" 7-885-216 7-885-316 7-885-416
20" – 7-885-320 7-885-420
25" – 7-885-325 7-885-425
32" – 7-885-325 –
ChuckDia K H G F J L D E B OAL
A C S ThreadM
Wt*lbs
5" 5/8 57/64
.4996 5/16
.1575
.4724.3150 .3150 .7874
2.1259 1.102
.126
5/16-18 .31
6-1/4"" 3/4 1-1/8.5511
2.5590 1.1423/8-16
.40
8" 7/8 1-3/8 .3543 .3937 .9843 3.1102 1.299 .68
10" 1-1/16 1-9/16
.7496 1/2
.6299.4331
.47241.1024 3.6220 1.417
1/2-131.06
12-1/2" 1-1/4 1-7/8 .5000 1.2598 4.3307 1.575 1.70
15-3/4"
1-1/2 2-1/4 .2835
.8661 .5906
.5512
1.4173 5.1181 1.929 5/8-11 2.43
20"
1.2598 .6299
1.5748 6.5351 2.126
3/4-10
4.81
25"1.9685
8.26772.146
7.36
32" 8.8583 7.90
5" to 10" Diameters
20" Diameter 25" to 32" Diameters
12-1/2" and 15-3/4" Diameters
* Approximate weight of one jaw
All solid jaws and master jawsare manufactured to Bison’srigid specifications
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
87
UNIV
ERSA
LSPA
RE
PARTS
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
Hard Master Jaws
ChuckDia
PartNumber K H G F J L D E B A S Thread
M C Wtlbs
6-1/4" 3-885-306 0.0294 1.12600.4996 0.3126
0.1575
0.6299 0.3543
0.3937
0.7874 2.5591
0.1181
3/8"-160.0511 0.08
8" 3-885-308 0.0344 1.37990.7087
0.3937 0.9843 3.1496 0.0543 0.14
10" 3-885-310 0.0419 1.5669
0.7496 0.5000
0.4724 1.1024 3.74021/2"-13
0.0589 0.22
12-1/2" 3-885-312 0.0492 1.8740 0.82680.5315 0.5118
1.2598 4.4882 0.0666 0.35
15-3/4" 3-885-316 0.0591 2.2500 0.2756 0.9449 1.4173 5.1181 5/8"-11 0.0713 0.50
ChuckDia
3-Jaw 4-Jaw
Part Number
5" 7-883-305 7-883-405
6-1/4" 7-883-306 7-883-406
8" 7-883-308 7-883-408
10" 7-883-310 7-883-410
12-1/2" 7-883-312 7-883-412
15-3/4" 7-883-316 7-883-416
20" 7-883-320 7-883-420
25" 7-883-325 7-883-425
32" 7-883-325 7-883-425
BISON Hard Top Jaws for 3 and 4-Jaw Scroll Chucks• American Standard Tongue and Groove Jaws• Sold in sets• Standard jaws are designed for finishing and medium duty machining• Heavy duty jaws are designed for heavy duty machining
StandardJaws
ChuckDia K H G J K D E F N C B OAL
A O P Wt per Pclbs
5" 5/8 57/64
.4996
.35 .59
.3129
.157
.1260
.315 1.516 .866 2.205 .57 1.38 .37
6-1/4" 3/4 1-1/8.43 .71
.335 1.634 .984 2.638 .71 1.63 .56
8" 7/8 1-3/8 .374 1.713 1.063 3.347 .85 2.01 .79
10" 1-1/16 1-9/16.7496 .55 .78
.5004
.472 2.023 1.280 3.740 .96 2.32 1.32
12-1/2" 1-1/4 1-7/8 .512 2.165 1.457 4.331 1.04 2.68 2.01
15-3/4"
1-1/2 2-1/4 .7496
.71 1.0
.2480
.532 2.5391.654
5.000
1.06 3.01 2.98
20"
.87 1.3
.689 2.933 1.97 3.46 3.42
25".827 3.228
2.0472.01 3.50 5.34
32" 2.047
• American Standard tongue and groove jaws• Sold in 3 piece sets
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LSP
ARE
PARTS
88 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
Hard Top Jaws for 3 and 4-Jaw Scroll Chucks
ChuckDia
PartNumber M H G J K L D E F N1 N2 C B A O P Q Wt
lbs
6-1/4" 3-883-306 0.7480 1.12600.4996 0.4173 0.6496
0.43310.3126
0.15750.1181
0.3150 0.3543 1.6142 0.9843 2.6378 0.7047 1.6063 0.8268 0.12
8" 3-883-308 0.8740 1.3799 0.5118 0.3543 0.3937 1.7717 1.0630 3.1496 0.8465 2.0079 0.9449 0.16
10" 3-883-310 1.0630 1.5669
0.74960.5394 0.8268
0.5512
0.5000
0.4528 0.4921 2.0276 1.2992 3.8189 0.9724 2.3228 1.0039 0.28
12-1/2" 3-883-312 1.2500 1.8740 0.5906 0.4921 0.5315 2.1654 1.4567 4.3307 1.0354 2.6811 1.1024 0.41
15-3/4" 3-883-316 1.5000 2.2500 0.6890 1.0236 0.7283 0.2362 0.5315 0.5709 2.5394 1.6535 5.0000 0.9567 2.9724 1.2795 0.61
• American Standard tongue and groove jaws• Sold in 3 piece sets
BISON Mounting Bolts for Hard and Soft Top Jaws
L
ChuckDia Thread
Screw No. 1 Screw No. 2
PartNumber L Part
Number L
5" 5/16"-18 7-897-503
3/4
7-897-504 1
6-1/4"3/8"-16 7-897-510 7-897-512 1-1/4
8"
10"1/2"-13 7-897-530 1 7-897-531 1-1/2
12-1/2"
15-3/4" 5/8"-11 7-897-540 1-1/4 7-897-541 1-3/4
20"
3/4"-10 7-897-558 1-1/2
7-897-561 3
25"7-897-562 3-1/4
32"
ChuckDia
SquareSize
Extended Length Standard Length Heavy Duty
PartNumber L Part
Number L PartNumber
3" .2344 7-889-003L 3.15 7-889-003 2.36 7-889-003C
4" .3543 – –7-889-005 3.15 7-889-005C
5" .3543 – –
6-1/4" .43317-889-008L
8.5
7-889-008 3.94 7-889-008C8" .4331
10" .55127-889-012L 7-889-012 4.72 7-889-012C
12-1/2" .5512
15-3/4" .6693 – – 7-889-016
5.51
7-889-016C
20" .7480 – –7-889-025
–
25" .7480 – – –
32" .7480 – – 7-889-032 –
BISON Extended and Standard Length Wrenches
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
89
UNIV
ERSA
LSPA
RE
PARTS
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
BISON Enhanced Serration Jaws for Universal and Precision Scroll Chucks• Jaw gripping surfaces serration 1/8"• Sold in sets• Jaws are recommended for heavy machining applications
ChuckDia
Enhanced SerrationJaws
Part Number10" 7-883-310012" 7-883-312016" 7-883-316020" 7-883-3120
25" and 32" 7-883-3250
ChuckDia
3-Jaw 4-JawC L B F E N P O Wt per Pc
lbsPart Number
3" 7-881-303 – 1.1024 1.2598 .4331.2362 .2362
.2362 0.827 .374 .10
4" 7-881-304 – 1.2598 1.6535 .5906 .2756 1.063 .433 .19
5" 7-881-305 7-881-405 1.5748 2.0079.7874 .3150 .3150
.3150 1.313 .512 .40
6-1/4" 7-881-306 7-881-406 2.0866 2.7559 .3937 1.772 .748 .80
8" 7-881-308 7-881-408 2.1260 3.3459 .9843 .3543 .3937 .4724 2.244 .906 1.07
10" 7-881-310 7-881-410 2.4803 4.1339 1.1024 .4331.4724
.5512 2.736 1.102 1.73
12-1/2" 7-881-312 7-881-412 2.9528 4.9213 1.2598 .5000 .7087 3.268 1.358 2.90
15-3/4" 7-881-316 7-881-416 3.6220 5.7087 1.4173 .5906
.5512
.8661 3.898 1.417 5.20
20" 7-881-320 7-881-420 3.9370 7.0866 1.5748.6299
1.0236 4.705 1.969 7.33
25" 7-881-325 7-881-425 4.3307 8.8583 1.9685 1.1024 5.866 2.598 13.00
BISON ID Hard Solid Jaws for 3 and 4-Jaw Scroll Chucks• Sold in sets
ChuckDia Part Number L B H h
6-1/4" 3-881-306 2.756 0.787 2.126
0.47248" 3-881-308 3.347 0.984 2.402
10" 3-881-310 4.134 1.102 2.717
12-1/2" 3-881-312 4.921 1.260 2.9530.7087
15-3/4" 3-881-316 5.709 1.417 3.622
ID Hard Solid Jaws for 3-Jaw Scroll Chuck• Sold in 3 piece sets
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LSP
ARE
PARTS
90 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
ChuckDia
3-Jaw 4-JawC L B F E N P O Wt per Pc
lbsPart Number
3" 7-880-303 – 1.1024 1.2598 .4331.2362 .2362
.2362 0.827 .374 .10
4" 7-880-304 – 1.2598 1.6535 .5906 .2756 1.063 .433 .19
5" 7-880-305 7-880-405 1.5748 2.0079.7874 .3150 .3150
.3150 1.313 .512 .40
6-1/4" 7-880-306 7-880-406 2.0866 2.7559 .3937 1.772 .748 .80
8" 7-880-308 7-880-408 2.1260 3.3459 .9843 .3543 .3937 .4724 2.244 .906 1.07
10" 7-880-310 7-880-410 2.4803 4.1339 1.1024 .4331.4724
.5512 2.736 1.102 1.73
12-1/2" 7-880-312 7-880-412 2.9528 4.9213 1.2598 .5000 .7087 3.268 1.358 2.90
15-3/4" 7-880-316 7-880-416 3.6220 5.7087 1.4173 .5906
.5512
.8661 3.898 1.417 5.20
20" 7-880-320 7-880-420 3.9370 7.0866 1.5748.6299
1.0236 4.705 1.969 7.33
25" 7-880-325 7-880-425 4.3307 8.8583 1.9685 1.1024 5.866 2.598 13.00
BISON OD Hard Solid Jaws for 3 and 4-Jaw Scroll Chucks• Sold in sets
OD Hard Solid Jaws for 3-Jaw Scroll Chuck• Sold in 3 piece sets
ChuckDia Part Number L B H h
6-1/4" 3-880-306 2.756 0.787 2.126
0.47248" 3-880-308 3.347 0.984 2.402
10" 3-880-310 4.134 1.102 2.717
12-1/2" 3-880-312 4.921 1.260 2.9530.7087
15-3/4" 3-880-316 5.709 1.417 3.622
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
91
UNIV
ERSA
LSPA
RE
PARTS
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
ChuckDia
3-Jaw 4-JawC L B F E Wt per Pc
lbsPart Number
3" 7-882-303 – 1.1024 1.2598 .4331.2362 .2362
.13
4" 7-882-304 – 1.2598 1.6535 .5906 .29
5" 7-882-305 – 1.5748 2.0079.7874 .3150 .3150
.57
6-1/4" 7-882-306 7-882-406 2.0866 2.7559 1.10
8" 7-882-308 7-882-408 2.1260 3.3459 .9843 .3543 .3937 1.77
10" 7-882-310 7-882-410 2.4803 4.1339 1.1024 .4331.4724
3.00
12-1/2" 7-882-312 7-882-412 2.9528 4.9213 1.2598 .5000 4.20
15-3/4" 7-882-316 7-882-416 3.6220 5.7087 1.4173 .5906
.5512
5.33
20" 7-882-320 – 3.9370 7.0866 1.5748.6299
11.00
25" 7-882-325 – 4.3307 8.8583 1.9685 19.00
BISON Soft Solid Jaws for 3 and 4-Jaw Scroll Chucks• Sold in sets
ChuckDia
2-Jaw 3 and 4-JawA
3 and4-Jaw
B
2-JawB C D E F G H I J
Bolt SizeM
3-Jaw
Wtper PclbsPart Number
5" – 7-884-305 2.520 0.866 – 1.520
.3129
0.5910 1-1/4
.500
1.000
.1260.283
5/16-18 .66
6-1/4" 7-884-206 7-884-306 3.071 1.0001.575
1.634 0.8386 1-1/2 1.3393/8-16
1.01
8" 7-884-208 7-884-308 3.543 1.063 1.713 0.9488 1-3/4 1.575 1.43
10" 7-884-210 7-884-310 4.173 1.280 1.850 2.028
.5000
1.0827 2-1/8
.750
1.7721/2-13
2.54
12-1/2" 7-884-212 7-884-312 4.724 1.4572.047
2.165 1.2087 2-1/2 2.087
.2480
3.53
15-3/4" – 7-884-316 5.512 1.654 2.539
1.3543 3 2.480 .406
5/8-11 4.85
20" – 7-884-320 5.512 1.654 – 2.933
3/4-10
5.29
25" – 7-884-325 6.299 2.047 –3.288 9.26
32" – 7-884-325 6.299 2.047 –
Jaw mounting bolts canbe found on page 88
BISON Soft Top Jaws for 2, 3, and 4-Jaw Chucks• Sold by piece• American Standard Tongue and Groove Jaws
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]
Universal Scroll ChucksUNIV
ERSA
LSP
ARE
PARTS
92 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service 508-653-8897 • 800-992-4766 • www.toolmex.com
BISON Spare Parts for 2, 3, and 4-Jaw Chucks with Semi-Steel Body
Pinion Screw
PartNumber
7-888-904
7-888-904
7-888-906
7-888-906
7-888-910
7-888-910
7-888-910
7-888-920
7-888-920
7-888-920
7-888-920
Pinion**
PartNumber OD OAL Wt
lbs
7-886-303 .75 1.02 .04
7-886-304 .98 1.40 .12
7-886-305 .98 1.63 .14
7-886-306 1.1 1.87 .20
7-886-308 1.2 2.30 .42
7-886-310 1.4 2.72 .51
7-886-312 1.5 3.60 .77
7-886-316 1.7 4.41 1.48
7-886-320 2.0 5.30 2.09
7-886-325 2.0 5.87 2.51
7-886-332 2.0 8.07 4.41
ChuckDia
Scroll**
PartNumber OD H Wt
lbs
3" 7-887-303 2.16 .41 .16
4" 7-887-304 2.74 .49 .34
5" 7-887-305 3.70 .53 .66
6-1/4" 7-887-306 4.88 .71 1.85
8" 7-887-308 6.26 .79 2.65
10" 7-887-310 7.84 .87 4.28
12-1/2" 7-887-312 10.1 .98 9.50
15-3/4" 7-887-316 12.9 1.10 18.8
20" 7-887-320 16.4 1.18 36
25" 7-887-325 21.3 1.57 66
32" 7-887-332 27.4 1.77 148
** For semi-steel chucks onlyEye Bolts
ChuckDia L D
15-3/4" and 20" .9843 1.1811
25" and 28" 1.2205 1.3386
32", 36" and 40" 1.4961 1.5748
49" 1.7717 1.9685
Spare Parts for 3-Jaw Scroll Chucks with Semi-Steel Body
ChuckDia
Scroll
PartNumber OD
6-1/4" 3-887-306 4.8031
8" 3-887-308 6.1811
10" 3-887-310 7.7559
12-1/2" 3-887-312 10.1181
15-3/4" 3-887-316 12.6772
Wrench
PartNumber
SquareSize
3-889-306 0.3937
3-889-308 0.4724
3-889-310 0.4724
3-889-312 0.5118
3-889-316 0.5512
Pinion Screw
PartNumber OD L
3-888-306 0.1850 1.3780
3-888-308 0.2441 1.7126
3-888-310 0.2441 1.7126
3-888-312 0.3228 1.9685
3-888-316 0.3228 1.9685
Pinion
PartNumber OD L
3-886-306 1.1429 2.0669
3-886-308 1.2245 2.4134
3-886-310 1.3061 2.9134
3-886-312 1.4286 3.8583
3-886-316 1.5510 4.4882
• Sold by the pieceOD = outside diameterL = overall length
Order from Logan Actuator Co. - (815) 943-9500 - [email protected]