toolholder program · toolholder radialsquaretoolholder,lefthand,short, formb2 25 48-b2-40x25...

ST-10/15/20/25/30/35, DS-30 (VDI40)ST-20/25/30/35, DS-30 (BMT65)

Toolholder Program

QuickFlex®

Designedfor

BMT Turrets

The new quick change system forhigh performance and precision.

Minimal investment, maximal expandability.

4 - 6PageST-10/15/20/25/30/35, DS-30 (VDI40)

7 - 10PageST-20/25/30/35, DS-30 (BMT65)

11 - 12PageReduction sleeves

13 - 15PageCollets

EC = External coolant supplyHP-IC = High pressure internal coolant supply through cutting toolIC 80 bar = Internal and external coolant supplyMax. coolant pressure = 80 barIC 30 bar = Internal and external coolant supplyMax. coolant pressure = 30 barOnly use filtered coolant fluid (max. particle size = 50 µm)Do not run without coolantDo not use for machining abrasive materials such as cast iron, etc.

3© WTO GmbH * Subject to change without notice * www.wto.de

Contents

Toolholder

Radial square toolholder, left hand, short,Form B2

48-B2-40x2525

Radial square toolholder, left hand inverted,short, Form B4

48-B4-40x252548-B4-40x1001"

Radial square toolholder, left hand, long,Form B6

48-B6-40x2525

Radial square toolholder, left hand inverted,long, Form B8

48-B8-40x252548-B8-40x1001"

Axial square toolholder, left hand, Form C248-C2-40x2525

Axial square toolholder, left hand inverted,Form C4

48-C4-40x252548-C4-40x1001"

Cut-off holder, adjustable height, left hand48-AL-40x32SH 32

Cut-off holder, adjustable height, left handinverted

48-ALU-40x32SH 32

Cut-off holder, adjustable height, HP-ICIC 80 bar48-102690RSH 32IC 80 bar48-102690LSH 32

Toolholder

Holder for indexable insert drills, internalcoolant supply, Form E1

48-E1-40x16Ø 1648-E1-40x20Ø 2048-E1-40x25Ø 2548-E1-40x32Ø 3248-E1-40x40Ø 4048-E1-40x100Ø 1"

Boring bar holder, internal coolant supply,Form E2

48-E2-40x8Ø 848-E2-40x10Ø 1048-E2-40x12Ø 1248-E2-40x16Ø 1648-E2-40x20Ø 2048-E2-40x25Ø 2548-E2-40x30Ø 3048-E2-40x32Ø 3248-E2-40x40Ø 40

ER collet chuck holder, internal coolantsupply, Form E4

48-E4-40x25ER 25107525000

48-E4-40x32ER 32107532000

48-E4-40x40ER 40107540000

Plug, steel, Form Z248-Z2-40-SSteel

© WTO GmbH * Subject to change without notice * www.wto.de4

Haas ST-10/15/20/25/30/35, DS-30 (VDI40)

Driven Toolholders - QuickFlex®

Straight drill/milling unitEC1:1420132079-40ER-32 QF

0067732000

IC 80 bar1:1420132080-40ER-32 QF0067732000

Right angle drill/milling unitEC1:1420532128-40ER-32 QF

0067732000

IC 80 bar1:1420532129-40ER-32 QF0067732000

Driven Toolholders - Enhanced Program

Straight offset drill/milling unitEC1:1410120237-40ER 32

00675000592

IC 80 bar1:1410120266-40ER 3200675000592

EC1:2410113056-40ER 2000675000591

IC 80 bar1:2410113057-40ER 2000675000591

EC2:1410120239-40ER 3200675000592

IC 80 bar2:1410120240-40ER 3200675000592

Right angle drill/milling unitEC1:2410516098-40ER 25

00675000801

IC 80 bar1:2410516099-40ER 2500675000801

EC2:1410520291-40ER 3200675000490

IC 80 bar2:1410520292-40ER 3200675000490

Right angle back set drill/milling unitEC1:1420532106-40ER-32 QF

0067732000

IC 80 bar1:1420532107-40ER-32 QF0067732000

EC2:1420540029-40ER-40 QF0067740000

IC 80 bar2:1420540030-40ER-40 QF0067540000


Haas ST-10/15/20/25/30/35, DS-30 (VDI40)


Adjustable angle drill/milling unitEC1:1411016017-40ER 25

00675000934

IC 80 bar1:1411016033-40ER 2500675000934

EC1:2411010044-40ER 1600675000936

IC 80 bar1:2411010045-40ER 1600675000936

Offset slitting saw unitEC2.73:1411500022-40Type 14-2

00675000460

160016142 Ø 16

160022142 Ø 22

160027142 Ø 27

160015142 Ø 5/8"

160019142 Ø 3/4"

160023142 Ø 7/8"

160025142 Ø 1"

Broaching unit for ID and ODEC1:1414132001-40TN765050


Haas ST-10/15/20/25/30/35, DS-30 (VDI40)

Static Toolholders - Standard Program

OD cutting holder48-924282548-924661"

OD cutting holder, HP-ICIC 80 bar48-92428-HP25IC 80 bar48-92466-HP1"

OD cutting holder, both sides48-924382548-924721"

OD cutting holder, both sides, HP-ICIC 80 bar48-92438-HP25IC 80 bar48-92472-HP1"

Face cutting holder48-867192548-867201"

Face cutting holder, HP-ICIC 80 bar48-109249-HP25IC 80 bar48-109250-HP1"

Combination toolholder, LF=72IC 80 bar48-84375Ø 40IC 80 bar48-87077Ø 1 1/2"IC 80 bar48-107499Ø 50IC 80 bar48-107501Ø 2"

Boring bar holder, both sides48-101033Ø 32

Static Toolholders - Standard Program

Boring bar holder, double48-84524Ø 3248-86905Ø 1 1/4"

Cover plate48-87089


Haas ST-20/25/30/35, DS-30 (BMT65)

Static Toolholders - Enhanced Program

OD cutting holder, double, Y axis48-8610325(1")

OD cutting holder, both sides, double, Y axis48-8615025(1")

Cut-off holder, adjustable48-99060SH 32

Cut-off holder, adjustable, long48-100084SH 32

Cut-off holder, adjustable, HP-ICIC 80 bar48-102256RSH 32IC 80 bar48-102256LSH 32

Cut-off holder, adjustable, long, HP-ICIC 80 bar48-100082RSH 32IC 80 bar48-100082LSH 32

Combination toolholder, back setIC 80 bar48-102037Ø 40

241140020 ER32

241140026 ER40

Boring bar holder, double, both sides48-86160Ø 3248-86274Ø 1 1/4"


Haas ST-20/25/30/35, DS-30 (BMT65)

Driven Toolholders - QuickFlex®

Straight drill/milling unitEC1:1420132015-65ER-32 QF

0067732000

IC 80 bar1:1420132016-65ER-32 QF0067732000

Right angle drill/milling unit, LF=72EC1:1420532015-65ER-32 QF

0067732000

IC 80 bar1:1420532016-65ER-32 QF0067732000

Right angle drill/milling unit, both sides,LF=72

EC1:1420532017-65ER-32 QF0067732000


Straight drill/milling unitEC1:1410126001-65ER 40

00675000079

Straight milling unit with combination millarbor DIN 6358

EC1:1410222002-65Ø 2200675000483

EC1:1410225002-65Ø 1"00675000483

Straight offset drill/milling unitEC1:1420132037-65ER-32 QF

0067732000

IC 80 bar1:1420132038-65ER-32 QF0067732000

EC1:2420125010-65ER-25 QF0067725001

IC 80 bar1:2420125011-65ER-25 QF0067725001

Face drill/milling unit for ER collets, LF=72EC1:1410526005-65ER 40

00675000781

IC 80 bar1:1410526006-65ER 4000675000781


Haas ST-20/25/30/35, DS-30 (BMT65)


Right angle drill/milling unit, LF=72EC1:2420525010-65ER-25 QF

0067725001

IC 80 bar1:2420525011-65ER-25 QF0067725001

EC2:1420532027-65ER-32 QF0067732000

IC 80 bar2:1420532028-65ER-32 QF0067732000

Right anglemilling unit with combinationmillarbor DIN 6358, LF=72

EC1:1410622001-65Ø 2200675000483

EC1:1410625001-651"00675000483

Adjustable angle drill/milling unitEC1:1411010002-65ER 16

00675000902

IC 80 bar1:1411010003-65ER 1600675000902

EC1:2411007002-65ER 1100675000914

IC 80 bar1:2411007003-65ER 1100675000914


Gear hobbing unitEC1:1411500003-65Type 16-1EC2:1411500002-65Type 16-1

00675000927

160016161 Ø 16

160022161 Ø 22

160027161 Ø 27

160015161 Ø 5/8"

160019161 Ø 3/4"

160025161 Ø 1"

96394

Straight drill/milling unit, both sidesEC1:1413002001-65ER 25

00675000907

Straight drill/milling unit, double, Y axisEC1:1413002004-65ER 25

00675000907

2-spindle - Right angle drill/milling unit, Yaxis

EC1:1413502006-65ER 2500675000915

IC 80 bar1:1413502007-65ER 2500675000915

2-spindle - Right angle drill/milling unit, bothsides, Y axis

EC1:1413502008-65ER 2500675000915

Broaching unit for ID and ODEC1:1414532001-65TN765050


Haas ST-20/25/30/35, DS-30 (BMT65)

Standard reduction sleeves - cylindrical

Reduction sleeve Ø 20ø 6240020006ø 8240020008ø 10240020010ø 12240020012ø 14240020014ø 16240020016

Reduction sleeve Ø 25ø 6240025006ø 8240025008ø 10240025010ø 12240025012ø 16240025016ø 20240025020

Reduction sleeve Ø 32ø 6240032006ø 8240032008ø 10240032010ø 12240032012ø 16240032016ø 20240032020ø 25240032025

Reduction sleeve Ø 40ø 6240040006ø 8240040008ø 10240040010ø 12240040012ø 14240040014ø 16240040016ø 20240040020ø 25240040025ø 32240040032

Reduction sleeve Ø 50ø 10240050010ø 12240050012ø 16240050016ø 20240050020ø 25240050025ø 32240050032ø 40240050040

Reduction sleeve Ø 1 1/4"ø 3/8"2400125038ø 1/2"2400125050ø 5/8"2400125063ø 3/4"2400125075ø 7/8"2400125088ø 1"2400125100

Standard reduction sleeves - cylindrical

Reduction sleeve Ø 1 1/2"ø 3/8"2400150038ø 1/2"2400150050ø 5/8"2400150063ø 3/4"2400150075ø 7/8"2400150088ø 1"2400150100ø 1 1/4"2400150125

Reduction sleeve Ø 2"ø 1/2"2400200050ø 5/8"2400200063ø 7/8"2400200088ø 1"2400200100ø 1 1/4"2400200125ø 1 1/2"2400200150ø 1 3/4"2400200175


Accessories - Reduction sleeves

Standard reduction sleeves - morse taper

Reduction sleeve Ø 32MT 1240532001MT 2240532002MT 3240532003

Reduction sleeve Ø 40MT 1240540001MT 2240540002MT 3240540003MT 4240540004

Reduction sleeve Ø 50MT 2240550002MT 3240550003MT 4240550004


Accessories - Reduction sleeves

Collets DIN 6499B (ER/ESX)

inchmmER 11ø 0.276-0.020ø 7-0.5190011000ø 0.039-0.020ø 1-0.5190011010ø 0.059-0.039ø 1.5-1190011015ø 0.079-0.059ø 2-1.5190011020ø 0.098-0.079ø 2.5-2190011025ø 0.118-0.098ø 3-2.5190011030ø 0.138-0.118ø 3.5-3190011035ø 0.158-0.138ø 4-3.5190011040ø 0.177-0.158ø 4.5-4190011045ø 0.197-0.177ø 5-4.5190011050ø 0.217-0.197ø 5.5-5190011055ø 0.236-0.217ø 6-5.5190011060ø 0.256-0.236ø 6.5-6190011065ø 0.276-0.256ø 7-6.5190011070

inchmmER 16ø 0.394-0.020ø 10-0.5190016000ø 0.039-0.020ø 1-0.5190016010ø 0.079-0.039ø 2-1190016020ø 0.118-0.079ø 3-2190016030ø 0.158-0.118ø 4-3190016040ø 0.197-0.158ø 5-4190016050ø 0.236-0.197ø 6-5190016060ø 0.276-0.236ø 7-6190016070ø 0.315-0.276ø 8-7190016080ø 0.354-0.315ø 9-8190016090ø 0.394-0.354ø 10-9190016100

inchmmER 20ø 0.512-0.039ø 13-1190020000ø 0.039-0.020ø 1-0.5190020010ø 0.079-0.039ø 2-1190020020ø 0.118-0.079ø 3-2190020030ø 0.157-0.118ø 4-3190020040ø 0.197-0.157ø 5-4190020050ø 0.236-0.197ø 6-5190020060ø 0.276-0.236ø 7-6190020070ø 0.315-0.276ø 8-7190020080ø 0.354-0.315ø 9-8190020090ø 0.394-0.354ø 10-9190020100ø 0.433-0.394ø 11-10190020110ø 0.472-0.433ø 12-11190020120ø 0.512-0.472ø 13-12190020130


inchmmER 25ø 0.630-0.039ø 16-1190025000ø 0.079-0.039ø 2-1190025020ø 0.118-0.079ø 3-2190025030ø 0.157-0.118ø 4-3190025040ø 0.197-0.157ø 5-4190025050ø 0.236-0.197ø 6-5190025060ø 0.276-0.236ø 7-6190025070ø 0.315-0.276ø 8-7190025080ø 0.354-0.315ø 9-8190025090ø 0.394-0.354ø 10-9190025100ø 0.433-0.394ø 11-10190025110ø 0.472-0.433ø 12-11190025120ø 0.512-0.472ø 13-12190025130ø 0.551-0.512ø 14-13190025140ø 0.591-0.551ø 15-14190025150ø 0.630-0.591ø 16-15190025160

inchmmER 32ø 0.787-0.079ø 20-2190032000ø 0.118-0.079ø 3-2190032030ø 0.157-0.118ø 4-3190032040ø 0.197-0.157ø 5-4190032050ø 0.236-0.197ø 6-5190032060ø 0.276-0.236ø 7-6190032070ø 0.315-0.276ø 8-7190032080ø 0.354-0.315ø 9-8190032090ø 0.394-0.354ø 10-9190032100ø 0.433-0.394ø 11-10190032110ø 0.472-0.433ø 12-11190032120ø 0.512-0.472ø 13-12190032130ø 0.551-0.512ø 14-13190032140ø 0.591-0.551ø 15-14190032150ø 0.630-0.591ø 16-15190032160ø 0.669-0.630ø 17-16190032170ø 0.709-0.669ø 18-17190032180ø 0.748-0.709ø 19-18190032190ø 0.787-0.748ø 20-19190032200


Accessories - Collets


inchmmER 40ø 1.024-0.118ø 26-3190040000ø 0.157-0.118ø 4-3190040040ø 0.197-0.157ø 5-4190040050ø 0.236-0.197ø 6-5190040060ø 0.276-0.236ø 7-6190040070ø 0.315-0.276ø 8-7190040080ø 0.354-0.315ø 9-8190040090ø 0.394-0.354ø 10-9190040100ø 0.433-0.394ø 11-10190040110ø 0.472-0.433ø 12-11190040120ø 0.512-0.472ø 13-12190040130ø 0.551-0.512ø 14-13190040140ø 0.591-0.551ø 15-14190040150ø 0.630-0.591ø 16-15190040160ø 0.669-0.630ø 17-16190040170ø 0.709-0.669ø 18-17190040180ø 0.748-0.709ø 19-18190040190ø 0.787-0.748ø 20-19190040200ø 0.827-0.787ø 21-20190040210ø 0.866-0.827ø 22-21190040220ø 0.906-0.866ø 23-22190040230ø 0.945-0.906ø 24-23190040240ø 0.984-0.945ø 25-24190040250ø 1.024-0.984ø 26-25190040260

Collets DIN 6499D (ER/ESX) - sealed, for IC

inchmmER 11ø 3191011030ø 4191011040ø 5191011050ø 6191011060

ø 0.125191111013-inø 0.188191111019-inø 0.25191111025-in

inchmmER 16ø 3-10191016000ø 3191016030ø 4191016040ø 5191016050ø 6191016060ø 7191016070ø 8191016080ø 9191016090ø 10191016100

ø 0.125-0.375191116001ø 0.125191116013-inø 0.188191116019-inø 0.25191116025-inø 0.313191116031-inø 0.375191116038-in

inchmmER 25ø 4-16191025000ø 3191025030ø 4191025040ø 5191025050ø 6191025060ø 7191025070ø 8191025080ø 9191025090ø 10191025100ø 11191025110ø 12191025120ø 13191025130ø 14191025140ø 15191025150ø 16191025160

ø 0.25-0.625191125001ø 0.25191125025-inø 0.313191125031-inø 0.375191125038-inø 0.438191125044-inø 0.5191125050-inø 0.563191125056-inø 0.625191125063-in



Collets DIN 6499D (ER/ESX) - sealed, for IC

inchmmER 32ø 4-20191032000ø 3191032030ø 4191032040ø 5191032050ø 6191032060ø 7191032070ø 8191032080ø 9191032090ø 10191032100ø 11191032110ø 12191032120ø 13191032130ø 14191032140ø 15191032150ø 16191032160ø 17191032170ø 18191032180ø 19191032190ø 20191032200

ø 0.25-0.75191132001ø 0.25191132025-inø 0.313191132031-inø 0.375191132038-inø 0.438191132044-inø 0.5191132050-inø 0.563191132056-inø 0.625191132063-inø 0.688191132069-inø 0.75191132075-in

inchmmER 40ø 6191040060ø 8191040080ø 10191040100ø 12191040120ø 14191040140ø 16191040160ø 18191040180ø 20191040200ø 22191040220ø 25191040250

ø 0.25191140025-inø 0.313191140031-inø 0.375191140038-inø 0.438191140044-inø 0.5191140050-inø 0.563191140056-inø 0.625191140063-inø 0.688191140069-inø 0.75191140075-inø 0.875191140088-inø 1191140100-in



09

I 2

01

9 e

n

| AustraliaDimac Tooling [email protected]

| BelarusLLC “PMI Engineering”[email protected]

| [email protected]

| CanadaMittmann Industrial [email protected]

| ChinaShanghai [email protected]

| Czech RepublicALBA precision, spol. [email protected]

| [email protected]

| FinlandSuomen Terätuonti [email protected]

| FrancePhilippe [email protected]

| Great BritainCutwel [email protected]

| IndiaUlhas [email protected]

| IsraelE.Y.A.R. [email protected]

| ItalyPrymark [email protected]

| JapanNK Works Co. [email protected]

| KoreaWTO Office [email protected]

| MexicoWorkholding Engineering De Mé[email protected]

| NetherlandsToologic BeNeLux [email protected]

| NorwayHelge Karlsen Verktøy og Maskin [email protected]

| PolandARCO Andrzej [email protected]

| RomaniaSC Elif Trading [email protected]

| RussiaWTO Office [email protected]

| SlovakiaALBA precision [email protected]

| SpainITALMATIC, [email protected]

| SwedenKomet Scandinavia [email protected] | SwitzerlandUtilis [email protected]

| TaiwanKaiko Co., [email protected]

| TurkeyMYK CNC MAKINA SAN. [email protected]

| Ukraine„LLC“ SPA [email protected]

| USAWTO Inc.www.wto-usa.com

| GermanyWTO GmbHwww.wto.de | China

WTO Asiawww.wto-asia.com

WTO GmbHAuf der oberen Au 4577797 OhlsbachGermany

WTO USA13900-FSouth Lakes DriveCharlotte, NC 28273USA

WTO AsiaRoom 109-110, Building 2No. 228 Banting RoadJiuting Town, Songjiang District201615 ShanghaiChina

WTO worldwide

Our distribution partners. Competence right there.

toolholder program · toolholder radialsquaretoolholder,lefthand,short, formb2 25 48-b2-40x25...

Documents