Svllabus and sample questions for Assistant Accounts Officer

The topics to be covered in the recruitment examination are listed below. Please note that the level fothe questions will be commensurate to the M.Com. level syllabus in each of these topics as per theBangalore University curriculum.

Topic List:I. Basic Accounting2. Monetary System3. Operations Research and Quantitative Techniques4. International Business5. Macroeconomics6. Information Systems and Computers7. Financial Management8. Banking Scenario in India9. Risk Management10. Micro Finance11. International Business12. Business Ethics and Corporate Governance13. Strategic Cost Management14. Accounting Standard15. Direct Taxes16. Indirect Taxes17. Financial Markets18. Securities Analysis and Portfolio Management19. Commodities Markets20. Life Insurance21. General Insurance22. Management of Insurance Companies23. Marketing of Bank Products24. E - Commerce

I. FIFO stands forA. First In First Out$B. Flow In Flow OutC. First In Flow OutD. Flow In First Out

Sample Questions

2. Any expense that gives benefit for a period less than twelve months is calledA. Capital ExpenseB. Revenue Expense$C. Revenue ReceiptD. Deferred Expense

3. What will be debited. ifMohsin commenced business with cash?A. Capital AccountB. Cash Account$C. Drawings AccountD. Proprietor's Account

4. Which of the following statements best describes a limited liability company?A. It is normally a non-profit making organizationB. It is normally owned and managed by the same personsC. In law it is regarded as having a separate existence from its owners $D. It is normally owned by just one person

5. Which is the oldest branch of accounting?A. Financial Accounting$B. Cost AccountingC. Management AccountingD. None of these

Syllabus and sample questions for AE - Civil

The topics to be covered in the recruitment examination are listed below. Please note that the level ofthe questions will be commensurate to the B.Tech. level syllabus in each of these topics as per theVisvesvaraya Technological University (VTU) curriculum.

Lit of Topics:I. EngineeringMathematics2. Engineering Physics3. EngineeringChemistry4. BuildingMaterials and Construction Technology5. Strength of Materials6. Surveying7. FluidMechanics8. EngineeringGeology9. ConcreteTechnology10.StructuralAnalysis11.Hydraulics and Hydraulic Machines12.Building Planning and Drawing13.Design ofRCC Structural Elements14.GeotechnicalEngineering15.Hydrology and Irrigation Engineering16.Transportation Engineering17.ComputerAided Design18.Environmental Engineering19.Design and Drawing ofRC structures20. Hydraulic Structures and IrrigationDesign - Drawing21. Alternative Building Materials and Technologies22. Ground Improvement Techniques23. Ground Water Hydrology24. Rural Water Supply and Sanitation25. Traffic Engineering26. Design and Drawing of Steel Structures27. Estimation and Valuation28. Design of Pre - Stressed Concrete Structures29. HighwayGeometric design30. Open Channel Hydraulics31. SolidWaste Management32. RockMechanics33. PavementMaterials and Construction34. Air Pollution and Control35. Structural Dynamics36. Design and Drawing of Bridges37. Earthquake Resistant Design of Structures38. IndustrialWaste Water Treatment39. ConstructionManagement & EngineeringEconomics40. Urban Transport Planning41. Geographic Information System42. Water Resources Engineering43. Environmental Impact Assessment44. Reinforced Earth Structures

Sample Questions

1. Which one of the following represents an activityA. Digging FoundationB. Curing concreteC. Ordering materialD. All the above$

2. The final authority of technical aspects of a projectA. Assistant EngineerB. Executive EngineerC. Superintending EngineerD. Chief Engineer$

3. Which of the following is a polymineralic rock?A. MagnesiteB. QuartzC. Granite$D. Pure gypsum

4. The ratio of the volume of voids to the volume of soil solids in a given soil mass, is known asA. Void Ratio$B. Porosity of the SoilC. Specific GravityD. None of these

5. What is the advantage of a concrete pile over a timber pile?A. Termite resistantB. Can go to any lengthC. Higher bearing capacityD. All the above$

Svllabus and sample questions for AE - Computer Science and Information Systems

The topics to be covered in the recruitment examination are listed below. Please note that the level ofthe questions will be commensurate to the B.Tech. level syllabus in each of these topics as per theVisvesvaraya Technological University (VTU) curriculum.

List of topics:

I. Engineering Mathematics2. Engineering Physics3. Engineering Chemistry4. Introduction to Computer Programming5. Basic Electronics6. Electronic Circuits7. Data Structures8. Computer Programming and Programming Languages9. Graph Theory and Combinatorics10. Microprocessors11. Algorithms12. Computer Organization13. Logic Design14. Electronic Circuits15. Statistical Methods16. Software Engineering17. Operating Systems18. Database Management Systems19. Computer Networks20. Compiler Design21. Signals and Systems22. Computer Graphics23. Object Oriented Modeling and Design24. Embedded Computing Systems25. Computer Architecture26. Web programming27. Digital Signal Processing28. Multimedia Computing29. Data Warehousing and Data Mining30. Neural Network31. Artificial Intelligence32. Storage Area Networks33. Fuzzy Logic34. Wireless Networks and Mobile Computing35. VLSI Design36. Network Management Systems37. Information and Network Security38. Software testing39. Cloud, Grids and Clusters

Sample Questions

t: An on-line commercial site such as Flipcart is an example ofA. e-commerce database application$B. single-user database applicationC. multiuser database applicationD. data mining database application

2. What is the correct expansion of the acronym "SQL"?A. Structured Quantification LanguageB. Sequential Query LanguageC. Structured Query Language$D. none of these

3. Which of the following protocols can be used to find the hardware address of a local device?A. TCPB. ARP$C. IPD. None of these

4. Which of the following sequences of operations correctly depicts the hierarchy of arithmeticoperations in C?

A. / - * +B. * + 1-C. + - / *D. i * + - $

5. Which of the following combines separately compiled modules of a program into a formsuitable for execution?

A. assemblerB. linking loader$C. cross compilerD. None of the above

Svllabus and sample questions for AE - Electrical and Electronics

The topics to be covered in the recruitment examination are listed below. Please note that the level ofthe questions will be commensurate to the B.Tech. level syllabus in each of these topics as per theVisvesvaraya Technological University (VTU) curriculum.

List of topics:

I. Engineering Mathematics2. Engineering Physics3. Engineering Chemistry4. Introduction to Computer Programming5. Basic Electronics6. Electronic Circuits7. Electric Power Generation8. Electrical and Electronic Measurements and Instrumentation9. Network Analysis10. Logic Design11. Microcontrollers12. Control Systems13. Field Theory14. Power Electronics15. Transformers and Induction Machines16. Signals and Systems17. Transmission and Distribution18. DC machines and Synchronous Machines19. Linear IC's and Applications20. Control Theory21. Power System Analysis and Stability22. Switchgear and Protection23. Electrical Machine Design24. Digital Signal Processing25. Computer Aided Electrical Drawing26. Computer Techniques in Power System Analysis27. Electrical Power Utilization28. High Voltage Engineering29. Industrial Drives and Applications30. Electrical Design. Estimation and Costing31. Power System Operation and Control32. Reactive Power Management33. Data Base Management Systems34. Renewable Energy Sources35. Energy Auditing & Demand Side Management36. Electrical Power Quality37. Electrical Distribution Systems38. HYDC Transmission39. Artificial Neural Networks40. Digital System Design with VHDL41. Power System Planning42. Computer Control of Electrical Drives43. VLSI Circuits and Design44. Electromagnetic Compatibility

Sample Questions

I. Which of the following is used to measure resistance?A. VoltsB. WattsC. Ohms$D. Hertz

2. The number ofk.ilowatts in 135 milliwatts isA. 0.135 kWB. 0.0135 kWc. 0.00135 kWD. None ofthese$

3. If a pulse waveform has a high time of 8 ms and a pulse width of 32 ms, what is the value ofduty cycle?A.2.5%B. 25%$C.50%D.75%

4. When a fourth resistor is connected in series with three resistors, the total resistance willA. Increase$B. DecreaseC. Remains the sameD. Cannot say unless we know the exact parameters of the 4 resistors

5. Which of the following is true when one of three series resistors is removed from a circuit andthe circuit is reconnected,A. The current increases$B. The current decreasesC. The current remains the sameD. Cannot say unless we know the exact parameters of the resistors

Svllabus and sample questions for AE - Electronics and Telecommunications

The topics to be covered in the recruitment examination are listed below'. Please note that thelevel of the questions will be commensurate to the B.Tech, level syllabus in each of these topicsas per the Visvesvaraya Technological University (VTU) curriculum.

List of topics:I. Engineering Mathematics2. Engineering Physics3. Engineering Chemistry4. Introduction to Computer Programming5. Basic Electronics6. Electronic Circuits7. Electrical and Electronic Measurements and Instrumentation8. Network Analysis9. Logic Design10, MicrocontrollersI I. Control Systems12. Field Theory13. Power Electronics14. Transformers and Induction Machines15. Signals and Systems16. Transmission and Distribution17. Linear IC's and Applications18. Control Theory19. Power System Analysis and Stability20. Switchgear and Protection21. Electrical Machine Design22. Digital Signal Processing23. Computer Techniques in Power System Analysis24. Electrical Power Utilization25. Electrical Design, Estimation and Costing26. Power System Operation and Control27. Reactive Power Management28. Data Base Management Systems29. Renewable Energy Sources30. Artificial Neural Networks31. Digital System Design with VHDL32. Power System Planning33. Computer Control of Electrical Drives34. VLSI Circuits and Design35. Electromagnetic Compatibility36. Wireless Networks and Mobile Computing37. Network Management Systems38. Information and Network Security

Sample Questions

1.Which of the following capacitorsstore higher amount of energy?A. Plasticfilm capacitorB. PapercapacitorC. Mica capacitorSD. Leadcapacitor

2.The core of a coil hasa length of 20 cm. Theself-inductance is 16ml+, What is the self-inductance if the core length is doubled, while all other quantities remain the same?

A. 8 mHSB. 12mHC. 32 mHD. None of these

3. the current in an intrinsic semiconductor kept at room temperature is becauseofA. HolesB. ElectronsC. Both holes and electronsSD. Neither holes nor electrons

4. Which of the following is the most commonly usedmaterial for semiconductors?A. GermaniumB. Silicon$C. UraniumD. Radium

5.Which of the following functions iscarried out by the transponder of a communication satellite?A. Receivesthe signal from earth stationB. Amplifies the signaland changesthe frequencyC. Retransmits the signalD. All the aboveS

- - - - - - - - --- --------------------

Syllabus and sample questions for JE - Electrical

The topics to be covered in the recruitment examination are listed below, Please note that thelevel of the questions will be commensurate to the Diploma level syllabus in each of these topics.

List of topics:

I. Engineering Mathematics2. Engineering Physics3. Engineering Chemistry4. Introduction to Computer Programming5. Basic Electronics6. Electronic Circuits7. Electric Power Generation8. Electrical and Electronic Measurements and Instrumentation9. Network Analysis10. Logic Design11. Microcontrollers12. Control Systems13. Field Theory14. Power Electronics15. Transformers and Induction Machines16. Signals and Systems17. Transmission and Distribution18. DC machines and Synchronous Machines19. Linear IC's and Applications20. Control Theory21. Power System Analysis and Stability22. Switchgear and Protection23. Electrical Machine Design24. Digital Signal Processing25. Computer Aided Electrical Drawing26. Computer Techniques in Power System Analysis27. Electrical Power Utilization28. High Voltage Engineering29. Industrial Drives and Applications30. Electrical Design, Estimation and Costing31. Power System Operation and Control32. Reactive Power Management33. Data Base Management Systems34. Renewable Energy Sources35. Energy Auditing & Demand Side Management36. Electrical Power Quality37. Electrical Distribution Systems38. HVDe Transmission39. Artificial Neural Networks

,

40. Digital System Design with VHDL41. Power System Planning42. Computer Control of Electrical Drives43. VLSI Circuits and Design44. Electromagnetic Compatibility

Sample Questions

1. 20,000watts is sameasA. 20 kW$B. 20 mWC. 20llWD. None of these

2. Which of the following is not connected with electriCity?A. VoltageB. ResistanceC. LengthSD. Power

3. What happensto the current drawn from the sourcewhen a load resistanceis removed fromthe output of a voltage divider circuit?A. IncreasesB. DecreasesSC. Remainsthe sameD. Cannot sayunlesswe know the exact parametersof all the items involved

4. What happensto the induced voltage when the speedat which a conductor ismoved through amagnetic field is increased?A. Increases$B. DecreasesC. Remainsthe sameD. Followsan inverted "U" shape

5. Which of the following is true when we reversethe current going through the coil of anelectromagnet?A. Direction of the magnetic field reverses$B. Direction of the magnetic field remainsas it was beforeC. Themagnetic field gets cancelledD. The entire coil burns

- - - - - -------------------------------------------------------

Syllabus and sample questions for JE - Civil

The topics to be covered in the recruitment examination are listed below. Please note that thelevel of the questions will be commensurate to the Diploma level syllabus in each of these topics.

List of topics:

51.No. Topics1 EngineeringMathematics2 EngineeringPhysics3 EngineeringChemistry4 Materials of construction5 BasicComputer Skills6 Surveying7 Strength of Materials8 Environmental Engineering9 Construction Technology10 Hydraulics11 Water ResourceEngineering·12 Concrete Technology& R.C.C.13 Highway, Bridge& Airport Engineering14 Estimating & Costing15 Town Planning.16 Advanced Construction Technology.17 Repairs& Maintenance18 Geo-TechnicalEngineering19 SolidWaste Management20 Railway,Tunnel & Harbour Engineering21 Designof Steel& Masonry Structures22 Construction Management23 BasicManagement Skills

Sample Questions

1. Which of the following acts asa binding material in mortar?A. cement $ B.sand C.water D. none of these

2. What is seasoning of wood?A. it is a a process of removing sap from the woodsB. it is a process of making the wood completely fire-proofC. it is a processof making the wood thinner and heavierD. none of these

3. Which of the following methods is best for interpolation of contours?A. estimation basedon guessworkB. free hand drawingC.mathematical computationSD. all the above.

4. The water content can be estimated accurately by using _A. filtration methodB.machine squeezemethodC. alcohol methodD. oven-drying methods

5. What is the most important aspect to be taken into account while designing a R.C.C.cantileverbeam?

A. the resultant force at free endB. the resultant force at fixed endSC. the resultant force at mid spanD. none of these

Syllabus and sample questions for JE - (Electrical)(Electronics and Telecommunication Engineering)

The topics to be covered in the recruitment examination are listed below. Please note that thelevel of the questions will be commensurate to the Diploma level syllabus in each of these topics.

List of topics:

SI.No. Topic1 Digital Electronics2 EngineeringMathematics3 Engineering Physics4 EngineeringChemistry5 BasicElectrical Engineering& Electronic Components6 BasicComputer Skills7 Digital Electronics8 Semiconductor Devices9 Programming with C10 Analog Electronic Circuits11 Digital Electronics& Microprocessors12 Analog Communication13 Electronic Measurements and Instrumentation14 Microcontrollers and their Applications15 Digital Communication16 Data communication & Networks17 Audio & Video Systems18 Industrial Automation19 VHDLProgramming20 Advanced Microprocessors21 Advanced Communication22 BasicManagement Skills23 ARM Controller24 Medical Electronics

Sample Questions1. How many valence electrons are present in a pentavalent impurity?

A.5$ B.4 C.3 D.2

2. What happens to the resistivity when a material becomes a superconductor?

A. it reduces by 66.67%B. It increases exponentiallyC. it becomes zeros

D. none of these

3. What is the SI unit for electric charge?

A. Volt B. Ampere c. Coulomb$ D. Farad

4. What is the main advantage of CMOS?A. low movement of electronsB. high output impedanceC. low power consumptionSD. none of these

5. What is the function of a transponder in a communication satellite?A. receivesa signal from Earth station and amplifies the sameSB. it provides stability to the satelliteC. it produces the power required for running the satelliteD. all the above