to impart the training based on computer based training cbt and ict information and communication...

4
To impart the training based on computer based training CBT and ICT Information and communication Technology Training must be imparted 60 % with the help of AutoCAD to compete in the global market This course offers the student a theoretical basis for the development of drafting skills necessary to work in drafting, design, engineering, and technical professions. Emphasis is placed on terminology and procedures used in multiview projection, auxiliary and sectional views, intersections and developments, dimensioning, and pictorial drawing. Students are encouraged to develop an awareness of p roper drafting techniques, the geometry of technical drawing, and new technological advancements in the field of drafting. Computer aided drafting (CAD) is introduced. Training on AutoCAD Completely self-contained resource-Requires no drafting tools. o Gives students all the direction they need to begin drafting in an easily understandable, clearly laid out, and direct manner. Complies with all versions of AutoCAD-Including up to 2011. o Uses keyboard commands vs. pull-down menus, allowing users to focus on drafting skills and AutoCAD basics without being tied to a specific release of AutoCAD. “Prompt/Response” format. o Takes students step-by-step through each new AutoCAD command or activity. All of the guidelines and gridded paper necessary to complete assignments are included. o Gives students everything they need in one place so they won't spend time searching for other resources or materials. Step-by-step methodologies. o Illustrates for students the different ways processes can be done to attain the same goal. A hierarchy of drawings plus a relations to parts list. List of objectives at the beginning of each chapter. o Summarizes the areas that the student should be proficient in upon completion of the chapter. Practice exercises in each chapter. o Gives students ample opportunity to practice what they have just learned. End-of chapter review questions. o Encourages students to thoroughly review and practice the topics covered, increasing their chances of truly mastering the material presented. Numerous figures and illustrations. o Assists students in following along and makes the text a useful study tool for review

Upload: shrikant-sonavane

Post on 06-Apr-2018

218 views

Category:

Documents


0 download

TRANSCRIPT

8/3/2019 To Impart the Training Based on Computer Based Training CBT and ICT Information and Communication Technology

http://slidepdf.com/reader/full/to-impart-the-training-based-on-computer-based-training-cbt-and-ict-information 1/4

To impart the training based on computer based training CBT and ICT Information and

communication Technology

Training must be imparted 60 % with the help of AutoCAD to compete in the global

market

This course offers the student a theoretical basis for the development of drafting skills

necessary to work in drafting, design, engineering, and technical professions. Emphasisis placed on terminology and procedures used in multiview projection, auxiliary and

sectional views, intersections and developments, dimensioning, and pictorial drawing.

Students are encouraged to develop an awareness of proper drafting techniques, the

geometry of technical drawing, and new technological advancements in the field of 

drafting. Computer aided drafting (CAD) is introduced.

Training on AutoCAD

• Completely self-contained resource-Requires no drafting tools.

o Gives students all the direction they need to begin drafting in an easily

understandable, clearly laid out, and direct manner.

• Complies with all versions of AutoCAD-Including up to 2011.o Uses keyboard commands vs. pull-down menus, allowing users to focus on drafting

skills and AutoCAD basics without being tied to a specific release of AutoCAD.

• “Prompt/Response” format.

o Takes students step-by-step through each new AutoCAD command or activity.

• All of the guidelines and gridded paper necessary to complete assignments are

included.o Gives students everything they need in one place so they won't spend time

searching for other resources or materials.

• Step-by-step methodologies.

o Illustrates for students the different ways processes can be done to attain the same

goal.

• A hierarchy of drawings plus a relations to parts list.

• List of objectives at the beginning of each chapter.

o Summarizes the areas that the student should be proficient in upon completion of 

the chapter.

• Practice exercises in each chapter.o Gives students ample opportunity to practice what they have just learned.

• End-of chapter review questions.o Encourages students to thoroughly review and practice the topics covered,

increasing their chances of truly mastering the material presented.

• Numerous figures and illustrations.

o Assists students in following along and makes the text a useful study tool for review

8/3/2019 To Impart the Training Based on Computer Based Training CBT and ICT Information and Communication Technology

http://slidepdf.com/reader/full/to-impart-the-training-based-on-computer-based-training-cbt-and-ict-information 2/4

and practice.

• Graduated assignments build in level of difficulty.

o Allows students to build on previously-learned concepts and allows them to build

confidence in their drafting skills.

 Table of Contents

1. Introduction. 

2. Sketching Tools, Supplies, and Their Uses. 

3. AutoCAD Fundamentals. 

4. Lettering for Pencil Sketches. 

5. Sketching Line Weights and Drawing Constructions. 

6. Linetypes and Drawing Construction Using AutoCAD. 

7. Reading and Sketching Orthographic Views. 

8. Making Orthographic Views with AutoCAD. 

9. Sketching Sectional Views. 

10. Making Sectional Views with AutoCAD. 

11. Sketching Auxiliary Views. 

12. Making Auxiliary Views with AutoCAD. 

13. Sketching Pictorial Views. 

14. Making Isometric Views with AutoCAD. 

8/3/2019 To Impart the Training Based on Computer Based Training CBT and ICT Information and Communication Technology

http://slidepdf.com/reader/full/to-impart-the-training-based-on-computer-based-training-cbt-and-ict-information 3/4

15. Sketching Dimensions. 

16. Dimensioning with AutoCAD. 

17. Sketching Threads and Fasteners. 

18. AutoCAD Drawings of Fasteners Using Blocks and Attributes. 

19. Sketching Development Drawings. 

20. AutoCAD Developments with an Introduction to AutoCAD 3D. 

21. The Drawing System. 

Features:Drafting technology teach subjects including manual and computer aided drafting, 2D and 3D techniques, and

residential and commercial drafting.

With your degree, you'll be eligible for a position as a drafter, detailer, or CAD operator in industries including

aerospace, architecture, public utilities, and government.

Students develop mechanical and computer-aided drafting and design skills, including preparing assembly anddetail drawings, operating CADD software, and producing solid model drawings.

Course help everyone from novice AutoCad users to those wishing to complete a comprehensive CAD Industry

Expert program.

Students learn to use g-code programming to create instructions for CNC machinery, and to process CAD

drawings for computer aided manufacturing.

The SolidWorks and SolidModeling Designer program introduces the student with 2D CAD experience to 3D

solid modeling. Using applications including AutoDesk Inventor and SolidWorks, students learn to create parts

and other assemblies.

Course is intended to familiarize the user with the skills necessary to use CAD as an effective drafting and

design tool for mechanical, architectural, electrical, and other drafting and design professionals.

course introduces the student to basic theory and design techniques used in industrial drafting with emphasis on

the development of the drafting skills necessary for producing drawings used by industry for the design, production, and promotion of various products. Computer aided drafting (CAD) is included.

course is designed to acquaint the student with various types of graphic solutions to engineering and drafting

 problems. Special attention is given to orthographic projection as it relates to solving graphical space problems.

Extensive problem-solving involving points, lines, and planes, and aids to students' visualization process for 

advanced drafting, engineering design, and computer graphics applications are covered.

8/3/2019 To Impart the Training Based on Computer Based Training CBT and ICT Information and Communication Technology

http://slidepdf.com/reader/full/to-impart-the-training-based-on-computer-based-training-cbt-and-ict-information 4/4

3 credits

course details the techniques used in the preparation of pictorial technical material for illustration and

 publication. Advanced drawing techniques in axonometric, oblique, and perspectives are covered, as well as

 basic shading methods used in illustration, including line shading, stipple shading, and cast shadows. CADsoftware is used extensively to demonstrate how this medium is used for enhancing illustrations.

course provides continued study of advanced CAD technologies, giving students a complete hands-on

experience with three dimensional photorealistic and presentation graphics.