tmx end mills and collet chucks
DESCRIPTION
Toolmex TMX End Mills and Collet Chucks, 4-999-817TRANSCRIPT
www.toolmex.com
Efficiency and Flexibilitywith Micro Grain End Mills
Die MoldToolmex has the tools you need for machining hardened mold and die products. Mold and die machining requires tools that can handle extreme materials. TMX products offer you a variety of shapes and sizes along with the precision required for tight tolerance applications and excellent finishes.
MedicalOrthopedic parts and medical devices used in the medical industry are increasing in demand and complexity. Toolmex delivers medical machining solutions with our micro grain end mills designed for tough materials whether you are machining Titanium Alloys, Cobalt Chrome, or Stainless Steel implants.
AerospaceMachining aerospace parts means that you need high quality Micro Grain end mills with extended tool life that can be utilized at elevated speeds. You also need a tool that reduces self induced chatter for improved surface finishes. Toolmex has the tools you need to do all this by saving time and expense...and much more.
Power GenerationToolmex understands what it takes to machine super Alloys used in turbines for the gas, wind, steam, and oil power industries. To ensure precise, economical machining with these often difficult-to-cut materials, Toolmex offers specific tools to accommodate your various needs, call us and talk with a Product Manager about your business needs.
TMX short Collet Chucks and TMX Solid Carbide greatly increase your productivity
1075 Worcester Street, Natick, MA 01760-1589+1-508-653-8897 • 800-992-4766 • Fax +1-508-653-5110www.toolmex.com
Distributed by
4-899-817 2-12
©2012 Toolmex Corporation, Inc. All rights reserved. All specifications on this sheet are subject to change without notice. Photos shown are a general representation of the various models and may include some optional equipment. Toolmex Industrial Solutions and TMX are registered trademarks of Toolmex Corporation, Inc.
Scan and Explore
Features• Balanced to 25,000 RPM G2.5
• .0001" Runout from taper to pocket
• Taper ground to AT3 Standards
• Uses standard ER 32 Collets
• More consistent tool life
• Extremely rigid
NutPart Number
3-791-132
Taper Part Number
Collet Type Description L D Clamping
Range
CAT40 3-188-6432ER32 TMX Short Collet Chuck
1.14"36 MM ≤ 3/4"
CAT50 3-188-6532 1.45"
Tool
ho
lders TMX Toolholders
x1000rpm
TMX V-Flange Exceeds Industry Standards |
||
||| |
|
| | | | | | | | | | | | | | | || |
||
|| |
0
5
10 15 20 25 30
25,000RPM
Too
lhol
ders
TMX Toolholders
|
||
||
|
|| | | | | | |
| |
||
||
|
0
5
10 15 20
15,000RPM
x1000rpm
TMX V-Flange Exceeds Industry Standards
Wrench sold separately