Xten

der

Pole • Work from the floor

• Speed Installation• Improve Safety• Save money

TM

The professional contractor’s and low-voltage cable installer’s tool for easier overhead installations. Working from the floor provides a safer way to reach areas that previously were dangerous or inaccessible by ladders, scaffolding, and scissor lifts.... including vaulted ceilings, over stairwells, and through ceiling grid. This multi-purpose telescoping pole has interchangeable heads for installing J-Hooks, eye lag screws, ceiling wire, jack chain and threaded rod from the work floor.

Features• Install hanging hardware from work floor, improves

safety and efficiency• All-In-One adapter system for threaded rod, eye lag

screws, wire & jack chain• Install multiple fastener types to a variety of ceiling

structures – Elco®, Hanger Mate®, Buildex Sammy Super Screws®, Powers VertigoTM

• Powered with any 3/8" or 1/2" drill• Includes female hex adapter for 1/4" male driver

and 5/8" hex adapter• Video instructions for applications (Platinum website)• Tips & Instruction Booklet• Xtender Pole-12 (three 4' sections, ceilings up to 18')• Xtender Pole-18 (three 6' sections ceilings up to 24')

Applications• Hang ceiling wire (12 or 9 gauge)

Install up to 100 ceiling wires per hour.• Hang Threaded Rod

3/8" or 1/4" rod up to 10 feet long.• Overhead Screw Installation

Transforms into a very long screwdriver.• Hang Jack Chain

Easily from the work floor.• Hang Wire & Clip Assemblies

Eye lag screws, hangers, multi-purpose clips.

Technical Data• Material: Aircraft quality aluminum• Finish: Black anodized

See reverse for additional information.

California, USA Phone: 805.384.2777 / 800.749.5783 • Fax: 800.749.5784

www.platinumtools.comWe Make Connections EZ!™

Xtender Pole™

Adapters:

1/2" Hex - Use with Elco® HangerMate screws to install 1/4-20 or 3/8-16 threaded rod.

Included:

Drill Adapter - JH707Power the pole with any 3/8" or 1/2" drill

Additional adapters:

Saves money. Speeds installation. Improves safety.

AdapterBase

Open End 3/8" Adapter - JH702Use to install threaded rod.

1/2" NPT Adapter - JH705Use with installation tool, P/N JH975 or any other tool requiring 1/2" NPT (National Pipe Thread.)

Keyless Chuck Adapter, 3/8” - JH711

Female Open End 5/8" Hex Adapter - JH703For installing ITW Buildex Sammy Super Screws® & will work with Powers Vertigo™. For use with 1/4-20 & 3/8-16 threaded rod installation.

Female Hex Adapter for 1/4" Male Driver - JH701Use with any 1/4" hex bit.

(Shown with Phillips bit to create a very long screwdriver.)

Installation Tool - JH975For vertical (JH901-100) & angled (JH902-100) overhang.

Versatility comes from the unique adapter heads that are specific to each application.

Wire & chain adapter included.

Xtender Pole & AccessoriesPart No. Description UPCJH712 Xtender Pole-12 – (Box) 849160004202

JH718 Xtender Pole-18 – (Box) 849160004219

JH711 Keyless Chuck Adapter, 3/8” 849160010180

JH701 Female Hex Adapter – 1/4” Male Driver 849160004226

JH702 Open End 3/8” Adapter 849160004233

JH703 Female Open End 5/8” Hex Adapter 849160004240

JH705 1/2” NPT Adapter 849160004264

JH707 Drill Adapter 849160004288

JH975 Installation Tool – Vertical Overhang – (Box) 849160002987

We Make Connections EZ! ™

2017© Platinum Tools, Inc. All rights reserved. Xtender Pole 12/17 JB

California, USA Phone: 805.384.2777 / 800.749.5783 • Fax: 800.749.5784

www.platinumtools.com