8/13/2019 TM-81 Condenser Cleaner 5125

1/6

Model 512500 &512500AP (Air Purge)Condenser Cleaner

For Tube I.D. 1/2 to 2(12.7mm thru 50.8mm)

Operating and Maintenance Instruction

Elliott Tool Technologies Ltd 1760 Tuttle Avenue Dayton, Ohio 45403 U.S.A.

Phone: +1 800 332 0447 +1 937 253 6133 Fax: +1 937 253 9189

Elliott Tool Technologies UK Ltd Broadstone Hill Old Chalford Chipping Norton OXON OX7 5QPhone: +44 (0) 1608 672815 Fax: +44 (0) 1608 672810

TM-8110-13-04

retubingtools

Tube Gauges

Tube Cutters

Manual Tools

Spear Type Tube Pullers

Collet-Type Tube Pullers

CYCLGRIP Tube Extractors

Grooving Tools

End-Prep Tools

metal workingproducts

Back Chamfering Tools

Carbide Roller Burnishing Tools

Diamond Burnishing Tools

Elliptical Deburring Tools

Fine Boring Tools

Internal Recessing Tools

Magic Vise

Mechanical Joining Tools

Roller Burnishing Tools

Single Blade Reamers

tubeexpanders

Boiler Expanders

Heat Exchanger Expanders

Condenser Expanders

Refinery Expanders

tube rolling motors& torque controls

Electric

Pneumatic

tubecleaners

Air & Water Driven Motors

(Internal/External Drives)

Jiffy Guns

(Shoot-Thru Devices)

Roto-Jet

(Rotating Flex Shaft)

additionalproducts

Tube and Joint Testers

Tube Plugs

(High & Low Pressure)

Elliott offers a complete line of precision tube tools, including:

www.elliott-tool.com

8/13/2019 TM-81 Condenser Cleaner 5125

2/6

TM-81 Model 512500 & 512500AP (Air Purge) Condenser Cleaner

Drills and Brushes

Condenser and Heat Exchanger Tube Cleaning Dril ls and Brushes for 5224XLTube Cleaners

* Drill studs are required for CT type drills.** Drill couplings are required for drill tips and twist drills.

*** Brush standard material is steel, brushes are also available in brass and stainless s

Other size drills and brushes are available, contact Customer Service for details.

Tube ODTube

GaugeTube ID

Inch (mm) BWG Inch mm

*CT Drill

Part No.

*Drill

Stud

PartNo.

**Drill Tip

Part No.

**Drill

Coupling

Part No.

El Paso **Twist Drills *** B

16 .370" 9.40 502

17 .384" 9.755029-359 5005-359

1/2"(12.7mm)

18 .402" 10.21 5029-390 5005-390502

12 .407" 10.32 5029-390

5039K Not Available

5005-390

Not Available

502

13 .435" 11.05 5029-422 502

14 .459" 11.665039A 5100-422 5100B 5005-422 5172-426

502

15 .481" 12.225029-446

5100-468 5005-468 5172-468 502

16 .495" 12.57

17 .509" 12.935029-480

5039B5100-480 5005-480 522

5/8" (15.8mm)

18 .527" 13.39 5029-512 5100-512 5005-512

5172-475

52212 .532" 13.51 522

13 .560" 14.225029-512

5039C5100-512

5100C

5005-512 5172-507522

14 .584" 14.83

15 .606" 15.395029-568 5100-568 5005-568 5172-564 522

16 .620" 15.75

17 .634" 16.105029-604 5100-604

5100P

5005-604 5172-600 522

3/4" (19.0mm)

18 .652" 16.56 5029-640 5100-640 5005-640 5172-632 522

12 .657" 16.69 522

13 .685" 17.405029-640 5100-640 5005-640 5172-632

522

14 .709" 18.01

5039D

15 .731" 18.575029-691 5100-691

5100E

5005-691 5172-689 522

16 .745" 18.92

17 .759" 19.285029-727 5100-727 5005-727 5172-725 522

7/8" (22.2mm)

18 .777" 19.74 5029-759 5100-759 5005-759 5172-757 522

12 .782" 19.86 522

13 .810" 20.575029-759

5039E

5100-759

5100F

5005-759 5172-757522

14 .834" 21.18

15 .856" 21.745029-812 5100-812 5005-812 5172-814 522

16 .870" 22.09

17 .884" 22.455029-848

5039F

5100-848 5005-848 5172-850 522

1" (25.4mm)

18 .902" 22.91 5029-880 5039G 5100-880

5100G

5005-880 5172-882 5226

CT Drill

El Paso Drill

For Soft Deposits.These drills are carbide tipped

for hard deposits.

Twist Drill

Drill Tip

For Gummy Dep

Fulfilled Bru

For Powder Depand Polishin

8/13/2019 TM-81 Condenser Cleaner 5125

3/6

8/13/2019 TM-81 Condenser Cleaner 5125

4/6

8/13/2019 TM-81 Condenser Cleaner 5125

5/6

8/13/2019 TM-81 Condenser Cleaner 5125

6/6