tlc section - 동방하이테크를 찾아주셔서 ... · © copyright 2004 alltech associates,...
TRANSCRIPT
Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
460460 461461
TLC SectionTLC Plates .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..461-469
Alltech .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..462-463
EM Science .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..464-465
Analtech .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 466
Whatman .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 467
Macherey Nagel .. .. .. .. .. .. .. .. .. .. .. .. ..468-469
TLC Accessories .. .. .. .. .. .. .. .. .. .. .. ..470-480
CycloGraph™ System .. .. .. .. .. .. .. .. .. .. .. .. 470
Plate Cutters & Kits .. .. .. .. .. .. .. .. .. .. .. .. .. 471
Sample Application .. .. .. .. .. .. .. .. .. .. ..471-473
Developing Chambers .. .. .. .. .. .. .. .. .. ..474-475
TLC Storage .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 475
TLC Sprayers .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..476-477
UV Equipment .. .. .. .. .. .. .. .. .. .. .. .. .. ..478-479
TLC Accessories .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 480
Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
462462 463463
TLC Plate: Adsorbosil® RP HPTLCPart No: 16314Sol. System: Acetonitrile:Acetic Acid:Water (70:10:1)Development Time: 25minVisualization: Iodine Vapor
7088
1 2 3
1. Methyl Oleate2. Methyl Linoleate3. Methyl Linolenate
T L C P L AT E S
Alltech TLC Plates
Alltech Prekotes• High purity silica gel for increased sensitivity• Controlled particle size for faster separations and
improved resolution (>80% in 6-15µm range)• Precoated plates provide convenience and superior
layer quality
Adsorbosil®-Plus Silica Gel H(Soft Layer)
Adsorbosil®-Plus 1 Silica Gel G(Soft Layer)
+ CaSO4
Soft Layer• Contains no organic binders• Sample zones are easy to remove for further analysis
Adsorbosil® HPTLC Plates• 150µm layer thickness for fast, high resolution
separations• Smooth surface for noise-free densitometry
HPTLC with Organic Binder• Organic binder makes an abrasion resistant layer• Use up to 80% water in the solvent system• Max. temp for charring is 150°C
HPTLC with Inorganic Binder• Allows use of 100% water in the solvent system• Use when strong charring is required
SOFT LAYER ADSORBOSIL® PREKOTESDESCRIPTION QTY. PART NO. PRICE
Soft Layer Prekotes, Glass-BackedConventional, 250µm Layer Thickness, 20x20cmAdsorbosil®-Plus 25 16384Adsorbosil®-Plus P* 25 16376Adsorbosil®-Plus 1 25 16330Adsorbosil®-Plus 1 P* 25 16322Preadsorbent, 250µm Layer Thickness, 20x20cmAdsorbosil®-Plus 1 25 16370Adsorbosil®-Plus 1 P* 25 16371Preadsorbent/Prechannel, 250µm Layer, 20x20cmAdsorbosil®-Plus 1 25 16374Adsorbosil®-Plus 1 P* 25 16375Preparative, 500µm Layer Thickness, 20x20cmAdsorbosil®-Plus 1 25 16492
Hard Layer• Contains a proprietary inorganic binder to add
abrasion resistance to layer• Use when strong charring is required for visualization• Write on layer with pencil or felt pen• Sample zones can be removed for further analysis
HARD LAYER ADSORBOSIL® PREKOTESDESCRIPTION QTY. PART NO. PRICE
Hard Layer Prekotes, Glass-BackedConventional, 250µm Layer Thickness, 20x20cmAdsorbosil®-Plus 1 25 16324Adsorbosil®-Plus 1 P* 25 16326Preadsorbent, 250µm Layer Thickness, 20x20cmAdsorbosil®-Plus 1 25 16316Adsorbosil®-Plus 1 P* 25 16317Preadsorbent/Prechannel, 250µm Layer, 20x20cmAdsorbosil®-Plus 1 25 16380Adsorbosil®-Plus 1 P* 25 16381
Fatty Acid Separation
HIGH PERFORMANCE TLC PLATESDESCRIPTION QTY. PART NO. PRICE
Adsorbosil®-Plus Plates with Organic Binder, 10x10cmAdsorbosil®-Plus HPTLC 25 16405Adsorbosil®-Plus P, HPTLC, F254 25 16420Adsorbosil®-Plus HPTLC with Preadsorbent Zone
25 16402
Adsorbosil®-Plus P HPTLC with Preadsorbent Zone, F254
25 16403
Adsorbosil®-Plus 1 Plates with Inorganic Binder, 10x10cm Adsorbosil®-Plus 1 HPTLC 25 16400Adsorbosil®-Plus 1P HPTLC, with F254nm UV Indicator
25 16401
Reversed-phase HPTLC plates• Coated with non-polar, C18 chemically bonded support• Cross-linked organic polymer binder makes an abrasion
resistant layer and a smooth surface• Use to separate mixtures of lipophilic components,
hydrocarbons, fats and waxes, fat soluble vitamins or steroids
HIGH PERFORMANCE TLC PLATESDESCRIPTION QTY. PART NO. PRICE
Reversed-Phase C18 HPTLC, 150µm Layer ThicknessAdsorbosil® RP HPTLC, 10x10cm 25 16314Adsorbosil® RP HPTLC Plates with F254, 10x10cm
25 16315
Adsorbosil® RP HPTLC Plates, Prescored, 10x20cm
25 16318
Adsorbosil® RP HPTLC Plates, Prescored, with F254, 10x20cm
25 16319*P = With Fluorescent Indicator, 254 wavelength
*P = With Fluorescent Indicator, 254 wavelength
Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
462462 463463
7087
1. Progesterone2. Testosterone3. Hydrocortisone
Prep-Screen Sol. System:Methanol:Water (70:30)
HPLC Sol. System:Methanol:Water (70:30)
3
2
1
7065
3
2
1
5369
3179
T L C P L AT E S
Alltech TLC Plates
Silver Nitrate Argentation TLC Plates• Allow separation of carbon-carbon double bonds on
the basis of their cis-trans configuration and degree of unsaturation
Argentation plates are prepared by impregnating Adsorbosil®-Plus plates with the stated percentage of AgNO3 solution. More double or triple bonds (unsaturation) give lower Rƒ values. These plates do not contain fluorescent indicator. Visualization is usually by charring with acid. The product is light sensitive and should be stored in the dark. Activate plates for 1 hour at 110°C prior to use for improved separations.
Note: All orders are custom-made to minimize the darkening effects of silver nitrate that occur during storage. Delivery is estimated at 1 week to 10 days after receipt of order.
Prep-Screen TLC Plates• Made with the 10-12µm spherical silica gel used for
Alltech prep-HPLC cartridge columns• Available in both Econosphere™ silica gel and C18
(reversed-phase) bonded versions
Prep-Screen HPTLC Plates help to optimize sample separation parameters for use in preparative HPLC. These plates allow a quick, inexpensive preview of sample traits in various mobile phase systems prior to HPLC analysis. The adsorbent is the same Econosphere™ silica or C18 used in Alltech packed HPLC columns.
Econo-Prep HPLCPrep-Screen C18
Modified TLC PlatesReversed-Phase Separation (RPS)
• Hydrocarbon impregnated plates provide a less expensive alternative to bonded plates for analysis of polar samples
Modified Silica Gel Plates**• For unique applications
PREP SCREEN HPTLC PLATESDESCRIPTION QTY. PART NO. PRICE
Prep-Screen HPTLC Plates, 10x10cm, 200µm Layer Silica Gel, 10µm Spherical Adsorbent 10 16328C18, 10µm Spherical Adsorbent 10 16332
MODIFIED UNIPLATESDESCRIPTION QTY. PART NO. PRICE
Reversed-Phase, C18 Impregnated, 250µm LayerRPS, 20x20cm 25 750011RPSF*, 20x20cm 25 752011RPS, 10x20cm 25 750021RPSF*, 10x20cm 25 752021Silica Gel Uniplates, 20x20cm, 250µm LayerH - with 1% Potassium Oxalate 25 786011H - Silica gel HGF - Silica gel G + fluorescent indicator* F - Fluorescent indicator, 254nm** These are special order items. Allow 2 weeks for delivery.
ARGENTATION TLC PLATESDESCRIPTION QTY. PART NO. PRICE
Argentation TLC Plates, 250µm Layer, 20x20cm5% AgNO3/Silica Gel Plate 25 280110510% AgNO3/Silica Gel Plate 25 280111015% AgNO3/Silica Gel Plate 25 280111520% AgNO3/Silica Gel Plate 25 2801120
Alltech Special Application Plates
Alltech has a large selection of TLC plates to suit your separation needs.
Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
464464 465465
T L C P L AT E S
EM Science TLC Plates
EM ScienceSilica Gel, Analytical Layers, Glass-Backed Plates
• Reproducible analyses plate to plate and batch-to-batch
• High resolution and capacity• Abrasion resistant surface
PRECOATED ANALYTICAL SILICA GEL PLATES
DESCRIPTIONEM SCIENCEPART NO.
SIZE(CM)
LAYER(MM) QTY.
ALLTECHPART NO. PRICE
Analytical Plates, Glass-BackedSilica Gel-Conventional LayersSilica Gel 60 5721-7 20x20 0.25 25 7400
5626-6 10x20 0.25 50 74025724-3 5x20 0.25 100 7404
Silica Gel 60 F-254 5715-7 20x20 0.25 25 74065729-6 10x20 0.25 50 74085808-3 5x20 0.25 25 74735714-3 5x20 0.25 100 74105719-2 5x10 0.25 200 7412
Silica Gel, Micro Size PlatesSilica Gel 60* 15326-1 2.5x7.5 0.25 100 7477Silica Gel 60 F-254* 15327-1 2.5x7.5 0.25 100 7479Silica Gel 60 F-254** 15341-1 2.5x7.5 0.25 100 7807Silica Gel 60 F-254** 15341-5 2.5x7.5 0.25 500 7809Silica Gel, Pre-Concentrated Zone (2.5x20cm zone)Silica Gel 60, Pre-Conc Zone 11845-7 20x20 0.25 25 7465Silica Gel 60 F-254, 11798-7 20x20 0.25 25 7467Pre-Conc Zone 11846-6 10x20 0.25 50 7471Silica Gel, Prescored for 5x20cmSilica Gel 60 F-254 5608-7 20x20 0.25 20 7958*Packaged in a slide box with dividers between plates; ** Packaged in shrink wrap;
HIGH PERFORMANCE (HPTLC) PLATES
DESCRIPTIONEM SCIENCEPART NO.
SIZE(CM)
LAYER(MM) QTY.
ALLTECHPART NO. PRICE
Silica GelSilica Gel 60 5641-6 10x20 0.20 50 7448
5633-5 10x10 0.20 100 7452Silica Gel 60 F-254 5642-6 10x20 0.20 50 7456
5628-5 10x10 0.20 25 74585629-5 10x10 0.20 100 7534
Pre-Concentration Zone (2.5x20 Pre-Conc Zone)Silica Gel 60 Pre-Conc Zone 13748-5 10x10 0.20 25 7515Silica Gel 60 F-254, Pre-Conc 13728-6 20x10 0.20 50 7897PrescoredSilica Gel 60 5644-5 10x10 0.20 25 7454Silica Gel 60 F-254 5635-5 10x10 0.20 25 7462
MODIFIED HPTLC PLATES
DESCRIPTIONEM SCIENCEPART NO.
SIZE(CM)
LAYER(MM) QTY.
ALLTECHPART NO. PRICE
Water Resistant TLCSilica Gel RP-18W, F254s 13124-1 10x10 0.20 25 7945Reversed-PhaseSilica Gel RP-8, F-254s 13725-5 10x10 0.20 25 7466Silica Gel RP-18 5914-6 10x20 0.20 25 7898Silica Gel RP-18, F-254s 13724-5 10x10 0.20 25 7468Silica Gel RP-18, Pre-Con 15037-6 20x10 0.20 25 7899Partition CelluloseCellulose 5787-5 10x10 0.10 25 7903
5786-6 10x20 0.10 50 7905Cellulose F-254s 15035-5 10x10 0.10 25 7907Special ModifiedDiol Silica Gel Diol, F254s 12668-5 10x10 0.20 25 7987NH2 Silica Gel NH2, F-254s 15647-5 10x10 0.20 25 7439CN Silica Gel CN, F-254s 16464-5 10x10 0.20 25 7929*Prescored for 5x5cm.
Pre-Coated Glass-Backed HPTLC Plates
• True 5µm particle size• Thinner layer optimized for
nanoliter samples• Reduced analysis time• Ideal for HPTLC scouting
Special Modified Plates
CN Plates • Reversed-phase, normal adsorption
phase, or ion pair, depending on the eluant system used
Water-Resistant Plates (coded W) • Stable in water and organic solvent
mixtures
Wettable Reversed-Phase • Use with aqueous solvents up to
100% water
Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
464464 465465
T L C P L AT E S
EM Science TLC Plates
EM SciencePlastic and Aluminum Backed TLC Plates
• Flexible and unbreakable• Cut plates to size needed• Less expensive than glass• Especially suitable for automated
instruments
Alltech is a full line EM Science dealer. Call to inquire about products not listed in this selection.
PLASTIC AND ALUMINUM BACKED TLC PLATES
DESCRIPTIONEM SCIENCEPART NO.
SIZE(CM)
LAYER(MM) QTY.
ALLTECHPART NO. PRICE
Plastic Backed TLCSilica Gel 60 5748-7 20x20 0.20 25 5506Silica Gel 60 F-254 5735-7 20x20 0.20 25 5575Cellulose 5577-7 20x20 0.10 25 5502Cellulose F-254 5565-7 20x20 0.10 25 5503PEI Cellulose F*** 5579-7 20x20 0.10 25 5504Al Oxide 60 Neutral F-254 5581-7 20x20 0.20 25 5581Aluminum Backed TLC – Silica GelSilica Gel 60 5553-7 20x20 0.20 25 5538Silica Gel 60 F-254 5554-7 20x20 0.20 25 5539
5534-3 5x20 0.20 100 55345549-4 5x7.5 0.20 25 7978
Aluminum Backed TLC – Water ResistantSilica Gel 60W 16487-1 20x20 0.25 25 7943Silica Gel 60W, F-254 16484-1 20x20 0.25 25 7942Aluminum Backed TLC – SpecialtySilica Gel 60/Kieselguhr F-254 5567-7 20x20 0.20 25 7975Al Oxide 60 Neutral F-254 5550-7 20x20 0.20 25 5535Al Oxide 150 Neutral F-254 5551-7 20x20 0.20 25 7977Aluminum Backed HPTLC Silica Gel 60 5547-7 20x20 0.20 25 7983Silica Gel 60 F-254 5556-4 5x7.5 0.20 20 7985
SPECIALTY LAYERS ON GLASS PLATES
DESCRIPTIONEM SCIENCEPART NO.
SIZE(CM)
LAYER(MM) QTY.
ALLTECHPART NO. PRICE
Reversed-Phase, Sil Gel 60 RP-2 (Dimethyl) 5746-7 20x20 0.25 25 7503RP-2, F-254 (Dimethyl) 5747-7 20x20 0.25 25 7505RP-8, F-254s 15388-7 20x20 0.25 25 7507RP-18, F-254s 15389-7 20x20 0.25 25 7401
15685-1 5x10 0.25 25 7409KieselguhrKieselguhr F-254 5738-7 20x20 0.25 25 7499Silica Gel 60/Kieselguhr F-254 5737-7 20x20 0.25 25 7501Aluminum OxideType E, pore 60, F-254, pH 9 5713-7 20x20 0.25 25 7481Type T, pore 150, F-254, pH 9 5727-7 20x20 0.25 25 7430CelluloseCellulose 5716-7 20x20 0.10 25 7434Cellulose-F 5718-7 20x20 0.10 25 7485PEI Cellulose-F* 5725-7 20x20 0.10 25 7446Preparative Plates, Glass-BackedSilica Gel 60 5745-7 20x20 2.00 12 7966Silica Gel 60, F-254 5744-7 20x20 0.50 20 7961
13895-7 20x20 1.00 15 79625717-7 20x20 2.00 12 7967
Silica Gel 60, F-254s 13794-7 20x20 0.50 20 7963Pre-Conc Zone 13792-7 20x20 1.00 15 7964
13793-7 20x20 2.00 12 7965Silica Gel F-254 + 366 5637-7 20x20 2.00 12 7968*Microcrystalline cellulose impregnated with PEI. PEI plates should be stored at 2-4°C.
Specialty Glass Backed Plates
• Kieselguhr is an inert diatomaceous earth support used by impregnating with other materials.
• Surface areas of Aluminum oxides:
Type E – 60Å: 180-200m2/g Type T – 150Å: 60-90m2/g
Cost Saving Tip
TLC plates and HPLC columns are made using the same basic types of adsorbents. Even though you use a different technique, you can obtain similar separations, and you can switch easily from one method to the other. Because of the starting material costs, it is often much faster and less expensive to use TLC to develop an HPLC separation method.
EM Product Selection Hints• EM plate coatings do not
contain a gypsum binder. They contain a patented, inert, or gan ic, hard-layer bind er that is chip and abrasion resistant
• F-254s indicates presence of a special acid-stable fl uorescent indicator
Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
466466 467467
Analtech TLC PlatesT L C P L AT E S
UNIPLATES™
Silica Gel H and HF UNIPLATES™
Soft Layer• Contains no organic binder• Contains no calcium sulfate binder
Hard Layer• Contains an organic binder• 80% water resistant• Visualization by charring up to 150°C
HPTLC UNIPLATES™
• Smooth surface gives a high signal-to-noise ratio for increased sensitivity and precision
• High resolution separations in 5 minutes• Ideal for densitometric scanning
Alltech is a full line Analtech Dealer. Call to inquire about products not listed in this selection.
SILICA GEL H UNIPLATES™
DESCRIPTIONLAYER
THICKNESS QTY.H
PART NO.HF*
PART NO. PRICE
Soft Layer, No BindersConventional20x20cm 250µm 25 710011 72001110x20cm 250µm 25 710021 7200210Scored, 4, 5x20cm Sections20x20cm 250µm 25 710511 720511Preparative UNIPLATE™
20x20cm 500µm 25 710012 720012Hard Layer, Organic BinderConventional20x20cm 250µm 25 746011 74701110x20cm 250µm 25 746021 747021Scored, 4, 5x20cm Sections or 8, 2.5x10cm Sections20x20cm 250µm 25 746511 74751110x20cm 250µm 25 746521 747521*F-Fluorescent Indicator, 254nm
HPTLC UNIPLATES™
DESCRIPTIONLAYER
THICKNESS QTY. PART NO. PRICE
HPTLC Silica Gel with Inorganic Binder10x10cm, HP-GHL 150µm 25 75607710x10cm, HP-GHLF* 150µm 25 757077HPTLC UNIBOND™ Amino (NH2) 10x10cm, HP-NH2F 150µm 25 722077HPTLC UNIBOND™ Cyano (CN) 10x10cm, HP-CNF 150µm 25 723077Reversed-Phase HPTLC UNIBOND™
10x10cm, HP-RP18 150µm 25 76207710x10cm, HP-RP18F 150µm 25 763077*F-Fluorescent Indicator, 254nm
SILICA GEL G UNIPLATES™
DESCRIPTIONLAYER
THICKNESS QTY.G
PART NO.GF*
PART NO. PRICE
Soft Layer, No BindersConventional20x20cm 250µm 25 701011 70201110x20cm 250µm 25 701021 7020215x20cm 250µm 25 701031 702031Scored, 4, 5x20cm Sections20x20cm 250µm 25 701511 702511Preadsorbent20x20cm 250µm 25 731011 732011Preparative UNIPLATES™, Soft LayerConventional Prep 20x20cm 500µm 25 701012 70201220x20cm 1000µm 25 701013 70201320x20cm 1500µm 25 701014 70201420x20cm 2000µm 25 701015 702015Preadsorbent Prep Silica Gel G20x20cm 500µm 25 731012 73201220x20cm 1000µm 25 731013 732013Hard Layer, Inorganic BinderConventional20x20cm 250µm 25 711011 72101110x20cm 250µm 25 711021 721021Scored, 4, 5x20cm Sections20x20cm 250µm 25 711511 721511*F-Fluorescent Indicator, 254nm
SPECIALTY PREPARATIVES UNIPLATES™**
DESCRIPTIONLAYER
THICKNESS QTY.G
PART NO.GF*
PART NO. PRICE
Alumina G and GF20x20cm 1000µm 25 703013 704013AVICEL (Microcrystalline Cellulose) 20x20cm 500µm 25 705012 70601220x20cm 1000µm 25 705013 70601310% Silver Nitrate Impregnated Silica Gel G20x20cm 500µm 25 728012 729012*F-Fluorescent Indicator, 254nm
**Special order items require two weeks for delivery.
Silica Gel G and GF UNIPLATES™ • Calcium Sulfate Binder
Soft Layer
• Contains no organic binder
Hard Layer• Contains an inorganic binder• 100% water resistant• Visualization with strong charring reagents• Abrasion resistant
Specialty UNIPLATES™
Soft Layer, No BindersConventional
250µm
Soft Layer, No BindersConventional
250µm
Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
466466 467467
���
�������
��������
����������������
���������
����������������
�����������������
2040
T L C P L AT E S
Whatman TLC Plates
WhatmanReversed-Phase TLC Plates
• Separate both polar and non-polar com pounds by adjusting the sol vent system
• Effective for sep a ra tions of cis- and trans-isomers
In reversed-phase systems, the chain length of the hydrocarbon functional groups affects retention and the ability to accommodate the water content of solvent systems. In general, the longer the carbon chain, the greater the retention. It follows that a shorter chain length yields faster separations. Shorter chain lengths are more polar, i.e. more suitable to aqueous solvent systems.
Silica Gel TLC Plates
K6 Series • 60Å pore size, standard polarity• Contains an inert organic binder• Superior performance compared to silica Gel G
– better resolution, higher sensitivity
Multi-K Plates
Perform Separations Impossible on Conventional Plates
REVERSED-PHASE PLATES - GLASS BACKEDDESCRIPTION SIZE LAYER QTY. PART NO. PRICE
Glass-Backed TLC PlatesC2 Carbon Chain (KC2)KC2 20x20cm 200µm 25 4809800C18 Carbon Chain (KC18)MKC18F 1x3" 200µm 100 4803110KC18 20x20cm 200µm 25 4801800
MULTI-K DUAL PHASEDESCRIPTION SIZE LAYER QTY. PART NO. PRICE
Multi-K CS5(3cm C18 Strip on Silica Gel Layer)
20x20cm 250µm 25 4804820
Please call Alltech Customer Service to obtain Part Numbers for Plates with Fluorescent Indicator.
Alltech is a Full Line Whatman Dealer. Call to inquire about products not listed in this section.
FLEXIBLE ALUMINUM-BACKED TLC PLATESDESCRIPTION SIZE LAYER QTY. PART NO. PRICE
AL SIL G 20x20cm 250µm 25 4420221AL SIL G/UV254 20x20cm 250µm 25 4420222
Whatman Diamond (K6) Series• All the features of K6 plates with enhanced layer
stability • Withstands up to 180°C for charring• Superior organic binder produces an extra hard
surface, ideal for densitometry
K6 TLC PLATES - SILICA GEL 60Å, 10-12µM PARTICLE SIZEDESCRIPTION SIZE LAYER QTY. PART NO. PRICE
Analytical LayersK6 10x20cm 250µm 50 4860720K6 20x20cm 250µm 25 4860820Preparative (P) LayersPK6F 20x20cm 500µm 22 4861830PK6F 20x20cm 1000µm 20 4861840Preadsorbent (L), Channeled* (D), K6LK6D 20x20cm 250µm 25 4865821
DIAMOND SERIES PLATES (K6 + ENHANCED LAYER STABILITY)DESCRIPTION SIZE LAYER QTY. PART NO. PRICE
Analytical Layers, Silica Gel 60ÅMK6F 1x3" 250µm 500 4500101
F - fl uorescent indicator; M - microslide
Flexible Aluminum-Backed TLC Plates
F - fl uorescent indicator; M - microslide
*20x20cm has 19 channels F - fl uorescent indicator
• Silica gel and reversed-phase C18 layers on the same plate
• Separate mixed polarity samples using two dimensional chromatography
• Use two separation mechanisms with single step sample recovery
Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
468468 469469
T L C P L AT E S
Macherey-Nagel TLC Plates
Macherey-NagelADAMANT™ Silica Layers for TLC
• Increased UV brilliance for increased detection sensitivity
• ADAMANT™ Plates provide an extremely hard, dust-free surface
• Optimized particle size distribution of the ADAMANT™ plate shows an improved separation effi ciency
• Ideal for trace analyses
Silica Gel Plates• 60Å pore size• Particle size, 5 to 17µm• Binder is organic, stable in almost all organic
solvents and aggressive detection reagents
Nano-Series HPTLC Plates
Silica Gel 60• Particle size, 2-10µm• Higher speed• Better resolution and sensitivity than regular TLC
plates
Silica Gel C18• Separates highly polar materials• Acid resistant UV254 indicator
ADAMANT™ GLASS BACKED PLATESDESCRIPTION SIZE LAYER QTY. PART NO. PRICE
ADAMANT™ UV254 2.5x7.5cm 250µm 100 821005ADAMANT™ UV254 10x10cm 250µm 25 821020ADAMANT™ UV254 10x20cm 250µm 50 821025ADAMANT™ UV254 20x20cm 250µm 25 821030
Specialty Plates• Silica Gel & Cellulose – Mixed Layer are specifi c for
separation of food preservatives • Silica Gel Highly Purifi ed, w/Gypsum Binder are
specifi c for afl atoxin analysis• Cellulose MN 400, Avicel – Microcrystalline• Cellulose, MN 300 – Native Fibrous Cellulose• Aluminum Oxide, Basic, pH 9 with 60Å pore size,
surface area = 200m2/gram
SPECIALTY PLATESDESCRIPTION SIZE LAYER QTY. PART NO. PRICE
Specialty Silica Gel Plates, Glass BackedSilica Gel and Cellulose – Mixed LayerSILCEL-Mix-25 UV254 20x20cm 250µm 25 810043Silica Gel Highly Purifi ed With GypsumSIL G-25 HR 20x20cm 250µm 25 809033SIL G-25 HR UV254 20x20cm 250µm 25 809043Cellulose, Glass BackedCellulose MN 400, Avicel – Microcrystalline CelluloseCEL 400-10 20x20cm 100µm 25 808073CEL 400-10/UV254 20x20cm 100µm 25 808083Cellulose MN 300CEL 300-25 20x20cm 250µm 25 808033CEL 300-25 UV254 20x20cm 250µm 25 808043Specialty Plates, Glass BackedAluminum Oxide, BasicALOX-25 UV254 20x20cm 250µm 25 807023ALOX-100 UV254 20x20cm 1000µm 15 807033
GLASS BACKED MACHEREY-NAGEL TLC PLATESDESCRIPTION SIZE LAYER QTY. PART NO. PRICE
Silica Gel Plates, Glass BackedConventional Layers, Silica Gel 60SIL G-25 5x10cm 250µm 50 809017SIL G-25 5x20cm 250µm 100 809011SIL G-25 20x20cm 250µm 25 809013SIL G-25 UV254 5x20cm 250µm 100 809021SIL G-25 UV254 20x20cm 250µm 25 809023SIL G-25 UV254+366 20x20cm 250µm 25 809123Preparative LayersSIL G-100 UV254 20x20cm 1000µm 15 809063SIL G-200 UV254 20x20cm 2000µm 12 809083
NANO-SIL HPTLC PLATESDESCRIPTION SIZE LAYER QTY. PART NO. PRICE
Nano-Series HPTLC Plates, Glass Backed Silica Gel 60Nano-SIL-20 10x20cm 200µm 50 811013Nano-SIL-20/UV254 10x20cm 200µm 50 811023Silica Gel 60 with PreadsorbentNano-SILGUR-20 10x10cm 200µm 25 811032Nano-SILGUR-20 UV254 10x10cm 200µm 25 811042Silica Gel C18Nano-SIL C18-100 10x10cm 200µm 25 811052Nano-SIL C18-100 UV254 10x10cm 200µm 25 811062Nano-Series HPTLC Plates, Aluminum Backed*Silica Gel 60Nano-SIL G 20x20cm 200µm 25 818141Nano-SIL G/UV254 20x20cm 200µm 25 818143
Alltech is a full line Macherey-Nagel dealer. Call to inquire about products not listed in this section.
* Do not use with mineral acids or concentrated ammonia.
250µm 50
Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
468468 469469
T L C P L AT E S
Macherey-Nagel TLC Plates
Macherey-NagelPolygram® Series –Flexible Backed TLC Plates
Silica Gel 60• SIL G and SIL N layers have different binders and
show different separation characteristics
Cellulose, Avicel-Microcrystalline
Cellulose MN 300 – Native Fibrous Cellulose• Fibers are 2-20µm in length
Cellulose, Acetylated (AC)• Increased acetyl content increases hydrophobic
character of AC powder
Cellulose, Ion-Exchanger• DEAE carries positive charges at neutral and acidic pH• Use DEAE to separate proteins, enzymes, & hormones• Use PEI analyze nucleic acids
Ion Exchange/Silica Gel• Specifi c for amino acids, amino sugars, carboxylic
acids, antibiotics, inorganic phosphates and cations
Polyamide 6• Specifi c for separation of dansyl and DNP amino acids
POLYGRAM® FLEXIBLE-BACKED TLC PLATESDESCRIPTION SIZE LAYER QTY. PART NO. PRICE
Polyester Backed TLC Plates Silica Gel 60SIL G 20x20cm 250µm 25 805013SIL G/UV254 4x8cm 250µm 50 805021SIL G/UV 254 20x20cm 250µm 25 805023SIL N-HR/UV254 20x20cm 200µm 25 804023Cellulose PlatesCellulose MN 400, Avicel-Microcrystalline CelluloseCEL 400 20x20cm 100µm 25 801113CEL 400 UV254 20x20cm 100µm 25 801123Cellulose MN 300CEL 300 20x20cm 100µm 25 801013CEL 300 UV254 20x20cm 100µm 25 801023Cellulose, Acety lat edCEL 300 AC-10% 20x20cm 100µm 25 801033Cellulose, Ion-ExchangerCEL 300 DEAE 20x20cm 100µm 25 801073CEL 300 PEI* 20x20cm 100µm 25 801053CEL 300 PEI/UV254 20x20cm 100µm 25 801063Specialty Polyester Backed PlatesIon Exchange/Silica GelIONEX-25 SA-Na 20x20cm 250µm 25 806013IONEX-25 SB-AC 20x20cm 250µm 25 806023Polyamide 6POLYAMIDE 6 20x20cm 100µm 25 803013POLYAMIDE 6 UV254 20x20cm 100µm 25 803023
For additional information on Chiralplate and its applications, request datasheet 811055D.
For additional information on Hybrid Plates, request datasheet 811075D.
CHIRALPLATE TLC PLATESDESCRIPTION LAYER QTY. PART NO. PRICE
Chiralplate, Glass Backed5x20cm 250µm 50 81105710x20cm 250µm 4 81105610x20cm 250µm 25 81105520x20cm 250µm 25 811058
Chiralplate[1]
• Separates optically active isomers based on ligand exchange
• Ready-to-use, requires no solvent pretreatment[1] Chiralplate was developed in co op er a tion with Degussa AG, Hanau, Germany
HYBRID TLC PLATESDESCRIPTION LAYER QTY. PART NO. PRICE
Silica Gel RP18/UV254s** Plates, Glass Backed10x10cm 250µm 25 8110755x20cm 250µm 50 81107320x20cm 250µm 25 811071Prep, 20x20cm 250µm 15 811074Silica Gel RP18/UV254s** Plates, Aluminum Backed4x8cm 150µm 50 8181445x20cm 150µm 50 81814520x20cm 150µm 25 818146* PEI Plates must be refrigerated.** Acid resistant fl uorescent indicator
Hybrid Plates• The “Wettable” RP plate• For both reversed- and normal-phase chromatography• Determine polarity by eluant selection• Activate layer at 110-115°C prior to use • Particle size of 2-10µm for improved separations
POLYGRAM® FLEXIBLE-BACKED TLC PLATES (CONT’D) DESCRIPTION SIZE LAYER QTY. PART NO. PRICE
Aluminum Ox ide, Basic, 20µm Particle SizeALOX N/UV254 20x20cm 200µm 25 802023ALOX N/UV254 4x8cm 200µm 50 802021Aluminum Ox ide, Basic, pH9, Aluminum BackedALOX N 20x20cm 200µm 25 818013ALOX N/UV254 20x20cm 200µm 25 818023
Polyester Backed TLC Plates
20x20cm
Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
470470 471471
5268
6363
T L C A C C E S S O R I E S
CycloGraph™
Analtech CycloGraph™ A Radial Device for Preparative TLC Separations
• Ideal for Harrison Chromatotron and Analtech CycloGraph™
• Uses 15µm (average) silica gel GF with strong binder to allow cleaning and reuse of rotors
• Ready-to-scrape uniform plates
• Rotor spins at 720 RPM
CycloGraph™ II – Universal System
This unit operates using 100-240 V at 50 or 60Hz. The CycloGraph™ is CE marked and supplied with a US cord set, but also has an IEC 320 compatible outlet for universal operation. (Note: IEC 320 cord set is not supplied with the unit.)
The CycloGraph™ II System includes the instrument, Low-fl ow (0-15mL) Solvent Pump with Tubing, Rotor Scraper Kit, Built-in 4-watt UV254 UV Lamp, Drop-in rotor mount for easy set-up, instruction manual and one year warranty.
Other features of the unit are the convenient hinged lid with safety interlock, fi xed speed motor, touch pad control switching system and an enlarged tempered glass view port.
• Get fast effi cient separations - usually in 20 minutes or less
• Monitor eluting bands using the built-in low-profi le UV lamp
The CycloGraph™ System is a centrifugally accelerated device for performing preparative chromatographic separations. It combines the advantages of both preparative TLC and column chromatography and delivers fast, effi cient separations - usually in 20 minutes or less.
To obtain a separation, a solution of the sample is applied inside the adsorbent ring of the pre-cast rotor using a pump or hand syringe. The solvent mixture is then pumped through the adsorbent layer as the rotor spins. Centrifugal force separates the individual components because of their different affi nities for the layer and the solvent mixture. As the individual components/rings reach the outer rim of the rotor, they are spun off and collected in a special circular trough for retrieval and further testing.
Typical fl ow rates are in the range of 2-3mL/min per millimeter of adsorbent thickness. The inlet of the solvent metering pump may be switched from a weak solvent to a more polar solvent during a run. This allows compounds with a wide range of polarities to be separated. Use of a strong solvent at the end of a run removes strongly adsorbed compounds and allows reuse of the rotor. Use the built-in UV254 lamp to monitor the separation as it occurs. The separated substances which adsorb 254nm light will be visible against the fl uorescent green background of the rotor.
PRECAST ROTORSDESCRIPTION PART NO. PRICE
Silica Gel GF* Coated Rotors with F254 Indicator1000µm Rotor Thickness 7022032000µm Rotor Thickness 7022054000µm Rotor Thickness 70220616000µm Rotor Thickness 7022078000µm Rotor Thickness 702208Rotor ScrapersFor 1000µm Rotor 70503For 2000µm Rotor 705021For 4000µm Rotor 70504For 6000µm Rotor 70506For 8000µm Rotor 70508*F - Fluorescent indicator, 254nm
Alltech is a full line Analtech dealer. Call to inquire about products not listed in this section.
CYCLOGRAPH™ DESCRIPTION PART NO. PRICE
CycloGraph™ II, Universal, 100-240V,50-60Hz, CE Marked
78750
Digital Speed Monitor, Optional 78743Rotor Storage Cabinet 750051
Analtech Precast Rotors for CycloGraph™
A Radial Device for Preparative TLC SeparationsA Radial Device for Preparative TLC Separations
Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
470470 471471
3923
3072
4128
4130
T L C A C C E S S O R I E S
Plate Cutter and Kits
TLC Plate Cutter• Scores coated glass plates at
any position• Compact, portable, and easy
to operate
The scoring and cutting of glass plates is routine in many chromatography labs, either to economize on plate usage or to cut the plate following separation for further analysis.
The TLC Plate Cutter has a high quality carbide scriber mount ed into a movable plastic head. It is designed to produce optimal scoring on the glass surface of 20x20cm TLC plates with a total thickness (glass + coating) of 2mm. A smaller template is included with the unit for ease in cutting 10x10cm plates. The carbide scriber is easily replaced when there is a noticeable deterioration in cutting effi ciency.
Basic TLC Starter Kit• Durable, inexpensive
laboratory equipment• Practical, reusable, and
educational
This Basic TLC Laboratory Starter Kit contains all of the supplies necessary for the least experienced student or technician to complete an analysis using basic TLC techniques.
The kit includes a 20x20cm glass development tank and lid, tank liners, Silica Gel G TLC plates, sample spotters, a reagent sprayer, a disposable spray box, spotting template, sample dye mix and a basic instruction manual.
The solvents used for the separations are common laboratory reagents and are not provided in the kit. Also, due to trans por ta tion regulations, a spray reagent for analysis of samples other than the dye mix must be purchased separately.
Note About Sample Applications
Thorough drying of samples is a step that is often ignored but can result in development errors. If a small amount of solute is left on the plate it can interact with the development
system and affect the separation.
Many analysts assume the plate is dry when the solvent is no longer visible on the plate (5-10 minutes). However, depending on the volatility of the solvent and the quantity of sample applied, the drying time can be considerably longer. Generally, Rƒ values decrease as drying time increases until the dry state (stable Rƒ) is reached.
Plates can absorb moisture from the atmosphere during storage, so prior to sample application, all TLC plates should be heated at 120-130°C for about 30-40 minutes and allowed to cool in a desiccator. This ensures reproducible Rƒ values.
For additional information on the TLC Plate Cutter, request datasheet 7535U. This datasheet is also available on our website.
TLC PLATE CUTTERDESCRIPTION QTY. PART NO. PRICE
TLC Plate Cutter ea 7535Replacement Scribers 1 7565
3 7575
BASIC TLC STARTER KITDESCRIPTION QTY. PART NO. PRICE
Basic TLC Starter Kit ea 7640Replacement Test Dye MixturesTDM #1 for Silica Gel Plates ea 13006TDM #2 for Cellulose Plates ea 13007
TLC Spotting GuideThis template fi ts over a standard
20x20cm TLC plate. 1cm divisions allow for accurate sample application. After development, a series of labelled circles and lines on the template helps to estimate areas or to measure distances for Rƒ calculations.
Universal Spotting Template
• Use to cut channels or to spot plates
• Measure Rƒ values • Non-slip surface works with any size TLC plates
SPOTTING ACCESSORIESDESCRIPTION QTY. PART NO. PRICE
TLC Spotting Guide ea 7624
SPOTTING ACCESSORIESDESCRIPTION QTY. PART NO. PRICE
Universal Spotting Template ea 26270
Basic TLC Starter Kit
Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
472472 473473
5337
5374
4132
5384
5283
TLC Sample Streaker• For preparative TLC• Quantitative application of
large sample volumes
The TLC Sample Streaker is de signed to apply a narrow band (1mm wide) of sample solution to a plate up to 40cm wide. Without scratching the adsorbent layer, the streaker will apply sample in one-tenth the time required for hand spotting.
For an effective separation, the solution must be applied to the plate in a continuous band, not separate spots as in analytical TLC. This is accomplished through the mechanical action of forcing a syringe plunger downward as it travels across a sloping stainless steel bar. Complete instructions for use and calibration of this device are included.
TLC AutoSpotter• Produces compact,
uniform sample spots• Automatic shut-off• Speed and temperature
controls with indicator lights
• Heater with digital read out for rapid solvent evaporation
• Dispenses the entire contents of eigh teen 100µL syringes in 15 minutes
TLC Plate Scriber• Cuts channels in soft & hard layers• Adjust channel widths in multiples
of 1cm • Made of fl exible stainless steel
T L C A C C E S S O R I E S
Sample Applicators
For additional information on the TLC Plate Scriber, request datasheet U17102. This datasheet is also available on our website.
For additional information on the TLC Sample Streaker, request datasheet D17700. This datasheet is also available on our website.
TLC SAMPLE STREAKERDESCRIPTION PART NO. PRICE
Sample Streaker and Replacement PartsTLC Sample Streaker with 250µL Syringe 17700Syringe, 250µL, 2" Needle 17708Syringe, 500µL, 2" Needle 17710Drive Collar for 250µL Syringe 17196Drive Collar for 500µL Syringe 17206
ROMER TLC AUTOSPOTTERDESCRIPTION PART NO. PRICE
Romer TLC AutoSpotterModel 10, with 18 Syringe Holders*, 110V 98875
*Syringes are not supplied with the unit
SPOTTING ACCESSORIESDESCRIPTION QTY. PART NO. PRICE
TLC Plate Scriber ea 17102
TLC Plate Coating Supplies• Desaga plate coating device
and template• Adsorbosil®-Plus powders and
polished glass plates
PLATE COATING EQUIPMENTDESCRIPTION QTY. PART NO. PRICE
Desaga Plate Spreading Device and TemplatePlate Spreading Device ea 95116Plate Spreading Template ea 95118Polished Glass Plates20x20cm Plate, 3mm Thick 10 26080Alltech Adsorbosil® PowdersAdsorbosil®-Plus 1 1lb 160201Macherey-Nagel PowdersCellulose MN 301 1000g 81605Scientifi c Adsorbent PowdersSilica Gel for Flash LC, 32-63µm 2.5kg 0282595Polyamide for Column Chromatography, 50µm
250g 09602
For a complete list of TLC Adsorbents and Plate Coating Supplies, request datasheet D16030. Also available on our website.
Sample Application
Need Syringes?See page 473 for a selection of syringes for thin layer chromatography.
Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
472472 473473
5338
5286
5339
5340
5283
Drummond® Microcaps• Accuracy of ± 1%
The Drummond Microcap is a precision bore glass capillary tube that holds a known volume when filled by capillary action. The tube is emptied completely by squeezing the dispenser bulb. (Bulb is included with the unit.)
Drummond Wiretrol® Micropipettes• Combines the accuracy of a
microsyringe with the ease and economy of a disposable pipette
• Accuracy of ± 1%• Color-coded with a permanent
calibration line
These unique pipetting devices feature one-handed operation. Each unit contains a vial of 100 micropipettes, dispenser cap, handle, and one SS plunger.
Uncalibrated Disposable Micropipettes
Uncalibrated disposable glass micropipettes are intended for rapid qualitative sample application on TLC plates. Thick walls make these pipettes strong and easy to handle. Overall length is about 3 inches. Capacity is approximately 2-8µL.
Calibrated Disposable Micropipettes• Semi-quantitative, 5µL ± 0.5%• Color coded micropipettes with
sizes imprinted
Each package contains approximately 250 disposable micropipettes with calibration marks at 1, 2, 3, 4, and 5µL. Pipettes are five inches long with thick glass walls and a polished tip that will not damage layers.
Syringes for Thin Layer Chromatography• PTFE-coated needle tip (3/4")• Standard 2" needle length
TLC SYRINGESDESCRIPTION/CAPACITY REPLACEMENT NEEDLE QTY. PART NO. PRICE
TLC Syringes with PTFE Coated Needles (Hamilton)Fixed Needle, Blunt Point10µL, 26s ga. – ea 80050025µL, 22s ga. – ea 80250050µL, 22 ga. – ea 80950100µL, 22 ga. – ea 81050Removable Needle, Blunt Point, ga.,10µL, 26s ga. 80471 ea 80055050µL, 22 ga. 80477 ea 80955100µL, 22 ga. 80477 ea 81055
T L C A C C E S S O R I E S
Sample Applicators
DRUMMOND SAMPLE APPLICATORSDESCRIPTION/CAPACITY QTY. PART NO. PRICE
Drummond Microcaps0.5µL 100 38081.0µL 100 38092.0µL 100 38103.0µL 100 38115.0µL 100 381410.0µL 100 382015.0µL 100 382120.0µL 100 382225.0µL 100 382350.0µL 100 3828100.0µL 100 3838Drummond Microcap AccessoriesMicrocap Bulbs 6 3940
DRUMMOND SAMPLE APPLICATORSDESCRIPTION/CAPACITY QTY. PART NO. PRICE
Drummond Wiretrol Micropipettes1.0 to 5.0µL (Calibrated) 100 38423.0µL 100 38435.0µL 100 384410.0µL 100 384520.0µL 100 384625.0µL 100 384750.0µL 100 3849100.0µL 100 3851
DISPOSABLE MICROPIPETTESDESCRIPTION/CAPACITY QTY. PART NO. PRICE
Calibrated Disposable, 5µL 250 7614
UNCALIBRATED DISPOSABLE MICROPIPETTESDESCRIPTION/CAPACITY QTY. PART NO. PRICE
Maximum Fill, 2-8µL 300 7616Glass Capillary Tubes 1440 17203
Sample Applicators
Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
474474 475475
5243
5341
5342
5345
W
D
H
0571
5346
Rectangular TLC Tank Dimensions
• All are inside dimensions• Listed as width x height x depth
TLC TanksCylindrical TLC Tanks
• Requires minimal solvent usage• Glass cylindrical tanks with press-on lids• Optional rack holds fi ve 5x20cm tanks
Use 5x10cm tank to monitor reactions.
Microslide TLC Tank• Small glass chamber holds up to 10
microslide plates• Requires minimal solvent usage• Ideal teaching tool for TLC
Special Chamber for Linear HPTLC• No chamber presaturation• Requires 6mL solvent• Improves speed and resolution
A glass 10x10cm TLC plate is clamped to a glass plate with spacers to form the walls of the chamber. Vapor space between plates is minimal and eliminates the need for presaturation.
TLC Tank Pads• Medium weight lint-free pads for
TLC tank liners
Also use saturation pads to transfer buffer solution to TLC plates and to blot up spills.
CYLINDRICAL TLC TANKS AND TANK RACKDESCRIPTION PART NO. PRICE
Cylindrical TLC Tanks for 5x10mm and 4x8cm Plates, 2.5" o.d., 5" Height
17108
Cylindrical TLC Tanks for 5x20cm Plates 2.5" o.d., 9" Height
17107
Tank Rack for Part No. 17107 only 17014Cylindrical TLC Tanks for 10x20cm Plates 5" o.d., 9" Height (Not Shown)
17002DEVELOPING CHAMBERS
DESCRIPTION PART NO. PRICE
Rectangular Tanks, All Supplied with Glass LidThinline Tank for 10x10cm Plates, (12x11.5x6.4cm), (4.75x4.5x2.5")
7581
Standard Tank for 10x10cm Plates, (12x11.5x8.6cm), (4.75x4.5x3.37")
7550
Standard Tank for 20x20cm Plates, (27x24x7cm), (10.5x10x3")
7645
Standard Tank for 10x20cm Plates, (27x13x7cm), (10.5x5x3")
7582
Standard Tank for 5x5cm Plates, (17x15x8cm), (7x6x3")
7580
Rectangular TLC Tanks• Sizes available: 20x20, 10x10,
thinline 10x10, 10x20, and 5x5cm
• Unique beveled lip to elim i nate sharp edges
• Uniform fl at top for max i mum lid seal
This Rectangular TLC Tank is a heavy wall, clear glass block with fl at surface walls. The top has been ground to a uniform fl atness for per fect lid fi t. Edges are beveled inside and out to remove sharp edges. Lids are pol ished glass in sizes to match the tank dimensions.
T L C A C C E S S O R I E S
Developing Chambers
MICROSLIDE TLC TANKDESCRIPTION PART NO. PRICE
Microslide Tank 30020
TLC PADSDESCRIPTION PART NO. PRICE
20x20cm, Medium Weight, 100/pk 7630
LINEAR HPTLC TANK KIT FOR 10X10CM
DESCRIPTION PART NO. PRICE
Includes: Stainless Steel Chamber, Solvent Reservoir, Clamp, Instructions
30039
Cylindrical TLC TanksCylindrical TLC Tanks
Standard Tank for 20x20cm Plates,
Standard Tank for 10x20cm Plates,
Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
474474 475475
5412
5357
5414
5349
5408
5347
5350
Plastic Desiccating Cabinets• Transparent plastic with built-in plate
rack• Holds 24 20x20cm plates
This cabinet features a carrying handle, gasketed door with latch, feet, and desiccant tray. Cabinet weighs 5lbs (2.268kg) and measures 22cmD x 22cmW x 23cmH (8.5" x 8.5" x 9.25").
SS Desiccating Cabinets• 20-gauge stainless steel cabinet• Removable desiccant tray
The cabinet features a carrying handle and a gasketed door with positive lock latch. Cabinet weighs 12lbs (5.4kg), and measures 25cmD x 25cmW x 30cmH (9.75" x 9.75" x 11.75").
SS Plate Storage Rack• SS rack holds ten 20x20cm plates• Backstop to prevent plates from
falling out• Fits inside SS desiccating cabinet
Latch-Lid TLC CHROMATOTANK™ • Unique latching device assures tight
seal between lid and tank• No messy “grease” seals• Available in 20x20, 10x10, and
thinline 10x10cm
The unique latching device holds the matching ground glass surfaces of the lid and tank firmly in place to maintain an optimal equilibration atmosphere. The metal components of the Latch-Lid mechanism are made of stainless steel. Tank dimensions are the same as rectangular tanks.
Controlled Atmosphere Chamber• Ideal for applications with sensitive
samples• Provides an inert atmosphere for
drying developed plates• Protects sensitive samples from
decomposition• Eliminates solvent vapors in the lab when used with
vacuum
Multiple Plate Development Rack• Saves time and money• Choice of anodized aluminum or PTFE
resin coated rack• Sizes available to hold 6, 20x20cm or
6, 10x10cm plates
Latch-Lid Equilibration Apparatus• Provides vapor pretreatment system for
20x20cm plates• Allows addition of solvent without
disturbing equilibrium
The Equilibration Apparatus includes a Latch-Lid tank with a modified lid, and a multiplate rack. The modified lid has two retractable glass hooks passing through PTFE threaded collars which are used to raise and lower the rack inside the closed chamber.
T L C A C C E S S O R I E S
Developing Chambers
* Desiccant is not supplied with the unit.
DESICCANT STORAGE CABINETS AND DESICCANTSDESCRIPTION QTY. PART NO. PRICE
Desiccant Storage CabinetsPlastic Desiccating Cabinet* with Built-in Rack
ea 17050
Stainless Steel Cabinet* with Removable Desiccant Tray
ea 17004
SS Storage Rack with Handle ea 17052DesiccantsGrade 42 Indicating Silica 100g 05559Mole Sieve with Indicator 400cc 14637
DEVELOPING CHAMBERSDESCRIPTION PART NO. PRICE
Controlled Atmosphere Chamber 7632
LATCH-LID EQUILIBRATION APPARATUSDESCRIPTION PART NO. PRICE
Latch-Lid Equilibration Apparatus 7625
LATCH-LID CHROMATOTANK™
DESCRIPTION PART NO. PRICE
Thinline Latch-Lid Tank/Lid Unit, 10x10cm 7857Standard L-L Tank/Lid Unit, 10x10cm 7542Latch-Lid Tank/Lid Unit, 20x20cm Plates 7536
MULTIPLE PLATE DEVELOPMENT RACKDESCRIPTION PART NO. PRICE
Anodized Aluminum Rack for 20x20cm Plates 17051Anodized Aluminum Rack for 10x10cm Plates 17053PTFE Coated Rack for 20x20cm Plates 17074PTFE Coated Rack for 10x10cm Plates 17077
TLC StorageTLC Tanks
* Desiccant is not supplied with the unit.
Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
476476 477477
1892
5329 5332
5331
T L C A C C E S S O R I E S
Sprayers
Compressed Gas Sprayer• Replaceable pres sure unit• Refi llable sprayer• Reusable glass or plastic
container
Compressed Gas Sprayers provide a constant pressure and uni form dis tri bu tion of fi ne mist on your TLC plate. The unit only requires one hand to op er ate. It eliminates the need for com pressed gas cylinders in the lab area. The pressure unit con tains difl uoroethane. Unit sprays up to 16oz of liquid. Caution: Wetted parts are made of polypropylene or nylon. Do not store with dip tube immersed in reagent.
DESAGA Sprayer SG1Sprays without CFC
• Built-in, quiet operating, high performance pump
• Store sprayer in the charging station
This sprayer generates an ultra fi ne mist with droplet di am e ter of 15-20µm. The SG1 includes an ac cu mu la tor, charging unit with overload protection, glass reagent bottle and PTFE spray head.
Screw Cap Sprayer• Made of borosilicate glass• Choice of 4 sizes• Provides fi ne mist spray• Autoclavable
Safety Top Sprayers adjust the mist by covering the rear vent hole with a thumb. The atomizer tops are attached to the reservoir fl asks with a screw top and o-ring. The screw top delivers a positive seal between sprayer head and reservoir, eliminating the possibility of “blow back”. Remove the screw cap and o-ring prior to autoclaving. Operation of the unit is by low air pressure (5lbs).
Atomizer Sprayer• Atomizer bulb or
com pressed gas pro pel lant source
This borosilicate glass sprayer has a rear vent hole that allows full control of mist. It has a 4oz (125mL) reservoir. It is suit able for use with most cor ro sive liq uids.
For additional information about the Compressed Gas Sprayer, request datasheet U14654. This datasheet is also available on our website.
COMPRESSED GAS SPRAYERDESCRIPTION QTY. PART NO. PRICE
Complete Spray Unit with Glass Jar 3 14654Replacement Glass Jar with Lid 6 14655Disposable Poly Jar with Lid 6 14656Replacement Compressed Gas Unit 6 14657
DESAGA SPRAYERSDESCRIPTION QTY. PART NO. PRICE
SG1 Sprayer Unit ea 95107Replacement Reagent Bottle 10 95112
ATOMIZER REAGENT SPRAYERDESCRIPTION QTY. PART NO. PRICE
Atomizer Reagent Sprayer ea 17017
SAFETY TOP SPRAYER WITH SCREW CAPDESCRIPTION QTY. PART NO. PRICE
10mL ea 1454050mL ea 14545125mL ea 14550250mL ea 14555
TLC ReferencesREFERENCE TEXTBOOKS
DESCRIPTION QTY. PART NO. PRICE
Practice of TLC, 3rd Ed., 1992 by J.C. Touchstone
ea 98041
TLC – An Introduction, 1990 by K. Bauer, L. Gros, & W. Sauer
ea 98039
Concise Practical Book of TLC, 1993by L. Kraus
ea 98979
Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
476476 477477
5336
5370
5367
5368
5369 5407
Spray Reagents• Ready-to-use reagents minimize lab
handling of corrosive chemicals• New package minimizes hazardous
waste disposal• Batch-to-batch uniformity
SPRAY REAGENTSSPRAY REAGENT QTY. PART NO. PRICE
AHTT Reagents Kit 18223p-Anisidine 5x25mL 18096Antimony Trichloride 5x25mL 18204Bial’s Orcinol Reagent Kit 18208Bromocresol Green 5x25mL 18206Bromothymol Blue 5x25mL 18207Dragendorff’s Reagent 5x10mL 18219Iodine Solution/Spot Enhancer Kit 18104Iodine Vapor/Enhancer Kit 18101Iodoplatinate Reagent 5x25mL 18215Modifi ed Ehrlich’s 5x25mL 18221Molybdenum Blue 5x25mL 18213Ninhydrin 5x25mL 18200Ninhydrin-Plus 5x25mL 18222Phosphomolybdic Acid 5x25mL 18202Potassium–Dichromate/H2SO4 5x25mL 18209
Polyethylene Spray Box• Chemically resistant and reusable
The TLC Spray Box is unaffected by alkalies, salt solutions, and most acids and solvents. It will withstand temperatures up to 140°C. Size: 12"L x 12"W x 12"H (30.5cm).
Spray AccessoriesDisposable Spray Box
• Opens easily into 14"L x 14"W x 14"H (36.5cm) unit
• Unique design for spill containment • Heavy duty card board with disposal
bag provided
TLC SPRAY REAGENT ACCESSORIESDESCRIPTION QTY. PART NO. PRICE
TLC Plate SupportsStainless Steel Spray Support ea 16409Polypropylene Spray Stand ea 7636
Polypropylene Spray Stand• Front edge to hold plate for
spraying• Ideal for use in fume hood
Stainless Steel Spray Support• Self-draining• Holds plate above the
spraying surface
T L C A C C E S S O R I E S
TLC Spray Reagents and Accessories
For additional information about Spray Reagents, request datasheet D18200. This datasheet is also available on our website.
Spray Reagent Compound IndexAldehydes: AHTTAlkaloids: Dragendorff’s Reagent, Iodoplatinate
Phosphomolybdic AcidAmines: Fluorescamine, Iodoplatinate, Modifi ed
Ehrlich’s Reagent, Ninhydrin, Ninhydrin-Plus
Antibiotics: Fluorescamine, Modifi ed Ehrlich’s Reagent, Ninhydrin, Ninhydrin-Plus
Amino Acids, Related Compounds:
Fluorescamine, Ninhydrin, Ninhydrin-Plus
Antioxidants: Phosphomolybdic AcidCharring Reagent: Potassium Dichromate/H2SO4
Flavonoids & Foodstuffs: Bromocresol Green, Molybdenum Blue, Antimony Trichloride
Glycolipids: Bial’s Orcinol ReagentIndole Derivatives: Modifi ed Ehrlich’s ReagentLipids: Antimony Trichloride, Bial’s
Orcinol Reagent, Bromothymol Blue, Dragendorff’s, Molybdenum Blue, Ninhydrin, Ninhydrin-Plus, Phosphomolybdic Acid, K-Dichromate/H2SO4
Organic Acids: Bromocresol GreenPhenols: Phosphomolybdic AcidSteroids: Antimony Trichloride, Modifi ed Ehrlich’s
Reagent, Phosphomolybdic AcidSugars and Derivatives: p-Anisidine, Bial’s Orcinol Reagent,
Ninhydrin, Ninhydrin-PlusTerpenes: Phosphomolybdic AcidUniversal Non-Destructive:
Iodine
Vitamins: Antimony Trichloride, Iodoplatinate
TLC SPRAY REAGENT ACCESSORIESDESCRIPTION QTY. PART NO. PRICE
Spray Box esDis pos able Spray Box 5 16408Polyethylene Spray Box ea 17008
Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech offi ce or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
478478 479479
5317
5353
5409
5352
E-Series Ultraviolet Lamps• Easy to operate• Choice of intensity, wavelengths,
and sizes
The Spectroline® E-Series Lamps can be used as portable units, with UV viewing cabinets, or in photo darkroom cabinets. Lamps with a fi lter assembly provide maximum fl uorescent contrast with the least white light transmission.
UV Viewing Cabinet• Fixed eyepiece with UV
shield ed window• Uses 4- and 6-watt E-series
lamps• Construction similar to
darkroom cabinet
The UV Viewing Cabinet measures 12"L x 9"W x 6.5"H (30.5cmL x 22.9cmW x 16.5cmH). This cabinet cannot be used for photo systems because of the fi xed eyepiece.
Portable UV Light• Portable, compact• Requires 5 size “C” batteries (not
included)
Unit measures 6"L x 3.5"W x 1"H (15.2cmL x 8.9cmW x 2.5cmH).
PORTABLE BATTERY OPERATED UV LIGHTDESCRIPTION PART NO. PRICE
Short Wave, 254nm 18113Long Wave, 366nm 18108
UV Darkroom Cabinet• Removable eyepiece for camera use• Use 4-, 6-, or 8-watt E-series lamps
The Spectroline® CC-80 cabinet holds two 20 x 20cm TLC Plates. Bottom panels of the cabinet are re mov able and allow placement on top of the transilluminator. The cabinet is constructed of aluminum with a chemical resistant polyurethane coating. Felt curtains block out light. An internal white light provides visible illumination. Dimensions are 20.3"L x 17.5"W x 9.8"H (51.4cmL x 44.5cmW x 24.8cmH).
T L C A C C E S S O R I E S
UV Equipment
For additional information on Visualization Equipment, request datasheet 80225D. This datasheet is also available on our website.
UV VISUALIZATION EQUIPMENTDESCRIPTION PART NO. PRICE
UV Darkroom Cabinets for 20x20cm Plates115V, without Lamps 80225230V, without Lamps 8023525 Watt Replacement Bulbs115V for 80225 80248230V for 80235 80249
UV VIEWING CABINET, SUPPLIED WITHOUT LAMPSDESCRIPTION PART NO. PRICE
UV Viewing Cabinet, Model CM-10 80305
E-SERIES LAMPSDESCRIPTION PART NO. PRICE
8-watt Combo LampLW, SW, & Filter Assembly, 115V 80240LW, SW, & Filter Assembly, 230V 802458-watt Replacement PartsLW Replacement Tube 80242SW Replacement Tube 80244Combo Light Replacement Filter 802466-watt Combo LampLW, SW, & Filter Assembly, 115V 80250LW, SW, & Filter Assembly, 230V 802556-watt Replacement PartsLW Tube Replacement 80252SW Tube Replacement 80254Combo Light Filter Replacement 802564-watt Combo LampLW, SW, & Filter Assembly, 115V 80270LW, SW, & Filter Assembly, 230V 802754-watt Replacement PartsLW Tube Replacement 80272SW Tube Replacement 80274Combo Light Filter Replacement 80276Lamp AccessoriesUV Lamp Stand 80218UV Lamp Handle (not shown) 80219
Transilluminator
Darkroom Cabinet
E-Series UV Lamps
Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc. Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
478478 479479
6009
6007
Use a Digital Camera for Computer Storage of TLC Plate Images
• Decrease cost per image for document storage• Store hundreds of photos on disk for easy retrieval• Use of modular equipment minimizes set-up costs• Easy to use: snap the photo, view and save to disk
PHOTO DOCUMENTATION EQUIPMENTDESCRIPTION PART NO PRICE
Digital Camera & Adapter Kits with Software & USB InterfaceDigital Camera for Visible Light Conditions 80335 Camera Mounting Stand for Visible Light Photos 80345Digital Camera and Darkroom Camera Adapter* for UV Visualization
80349
Complete System for Both UV and Visible Light Documentation115V Documentation SystemIncludes darkroom cabinet, 2 each 8-watt UV combo lights, digital camera with USB interface, camera adapter, computer software, and camera mounting stand
80320
System for Visible Light Documentation Only115V Documentation SystemIncludes digital camera with USB interface, computer software, and camera mounting stand
80352
System for UV Documentation Only115V Documentation SystemIncludes darkroom cabinet, 2 each 8-watt UV combo lights, digital camera with USB interface, camera adapter, and computer software
80346
230V Documentation SystemIncludes darkroom cabinet, 2 each 8-watt UV combo lights, digital camera with USB interface, camera adapter, and computer software
80324
Optional Equipment (Not Shown)Polaroid Instant Camera, DS-34 80277Adapter* for Polaroid DS-34 80221Transilluminator for UV Visualization Transilluminator, 365nm, 115V 80292
Computer SpecificationsMinimum System Requirements: Pentium 166 processor, 16MB Ram with Windows 98, 1 free USB port, 10MB free hard-disk space, 64K color display, CD-ROM or DVD-ROM drive
Camera FeaturesCamera captures still images (800x600), less than 1 lux lighting. Complete installation instructions are included with the camera.
T L C A C C E S S O R I E S
UV Equipment
In some cases it may be helpful to use a transilluminator to enhance the visibility of the fluorescent compounds. The bottom panel of the darkroom cabinet can be removed and the entire cabinet can be placed on top of the transilluminator surface. The Transilluminator, 365nm, allows the long-wave light to pass through the TLC plate and enhances the visibility of the fluorescent compounds. While optional for most TLC work, it can be helpful when additional contrast is needed.
*Adapter for use only with darkroom cabinets, 80225, 80235
Photo Documentation System
E-Series UV Lamps
Camera
Darkroom Cabinet
For Visible Light Photos – Digital Camera with Mounting Stand
For UV Photo Documentation – Digital Camera with Darkroom
For UV photo documentation, a developed TLC Plate is placed in the darkroom cabinet and flooded from above with the appropriate UV light. The flexible eyepiece is replaced by the snap-on cabinet adapter provided with the camera. The camera is placed on the adapter and connected to the lab computer via the USB port. A simple click records the image.
Using the visible light method with mounting stand to record the plate image, the camera is placed on the holder which is preset at the appropriate focal distance. A simple click records the image. The camera mounting stand is especially helpful in archiving old photos of plates because it allows adjustment of the focal length using the height adjustment of the stand. The camera stand provides a better light source for regular visible light photos.
The software program provided with the camera allows easy archiving and retrieval of the photo images. The USB port connection from the camera to the computer makes use of the documentation system fast and easy. The documentation process is very simple but provides long term, accessible data storage.
Contact your Alltech office or distributor for current or local prices.© Copyright 2004 Alltech Associates, Inc.
480480
6563
5365
0614
4135
5288
5366
TLC Sample Recovery Tubes• Removes samples from TLC
plates by suction• Reusable and all glass
construction• Extract sample in tube
A vacuum is connected to one end of the sample recovery tube and pulls the sample into the tube and rests it against the frit. Then pass solvent through the recovery tube to extract the sample.
pH-Fix Universal Indicator Sticks• For general lab use• Simple application – four
indicator papers (6 x 5mm) are sealed to each 6 x 85mm stick
Timer• Times three activities at once• Large, easy-to-read display• Three distinctive alarms• Compact size, 3 x 3"
Strip-Mix for TLC Documentation• Removes sample as a single flexible film
for extraction• Eliminates silica dust associated with
scraping techniques• No water required
Strip-Mix is applied to a TLC plate after development. It binds the particles into a porous, coherent film which detaches itself from the glass spontaneously – without the use of water. The intact layer can be stored or the separated spots can be cut from the layer and studied individually. This makes Strip-Mix especially suitable for radiotracer studies.
Adsorbent Scraper• Choice of 3 blade widths for maximum versatility• Blade mounted in “easy-grip” handle
6mm – Small Spots, Ideal for Radial Chromatography and Linear HPTLC
13mm – Scrape Large Areas
Fluorescent Marking Pens• UV visible ink for sample
documentation
TLC SAMPLE RECOVERY TUBESDESCRIPTION QTY. PART NO. PRICE
0.5-1mL Sample Recovery Tube ea 170101-2mL Sample Recovery Tube ea 1701125-30mL Sample Recovery Tube ea 17012
2mm – Score Lines, Channels and Scrape Small Spots
T L C A C C E S S O R I E S
Miscellaneous
PH-FIX UNIVERSAL INDICATOR STICKSDESCRIPTION QTY. PART NO. PRICE
Range 0-14, 1.0pH Units 100 18147Range 4.5-10, 0.5pH Units 100 18158Range 7.0-14, 0.5pH Units 100 18160
WEST BEND TRIPLE TIMERDESCRIPTION QTY. PART NO. PRICE
West Bend Triple Timer ea 40032
TLC STRIP MIXDESCRIPTION QTY. PART NO. PRICE
TLC Strip Mix 400mL 18225
TLC SCRAPERSDESCRIPTION QTY. PART NO. PRICE
TLC Scraper Kit: 1 of each type Kit 762613mm TLC Scraper ea 7627Replacement Blades, 13mm 10 7627B6mm TLC Scraper ea 7602Replacement Blades, 6mm 5 7602B2mm TLC Scraper ea 7600Replacement Blades, 2mm 5 7600B
FLUORESCENT MARKING PENSDESCRIPTION QTY. PART NO. PRICE
Fluorescent Marking Pens 6/pk 80220
TLC Accessories