tiÊu chuẨn mỚi thÁng 9/2016 -...
TRANSCRIPT
TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH
TRUNG TÂM THÔNG TIN – THƯ VIỆN
TIÊU CHUẨN MỚI THÁNG 9/2016
Mục lục
TIÊU CHUẨN QUỐC GIA (TCVN) .................................................................................. 2
Chất lượng nước ..................................................................................................... 2
Hóa chất ................................................................................................................... 2
Công nghệ thông tin ............................................................................................... 3
Cao su và chất dẻo .................................................................................................. 3
Dầu mỏ ..................................................................................................................... 4
Đo lường và phép đo, hiện tượng vật lý ................................................................ 5
Giáo dục ................................................................................................................... 6
Khai thác mỏ và khoáng sản .................................................................................. 6
Hệ thống và bộ phận thủy lực ................................................................................ 7
Chăm sóc sức khỏe.................................................................................................. 7
TIÊU CHUẨN NƯỚC NGOÀI ........................................................................................... 7
Công nghệ thông tin ............................................................................................... 7
Điện – Điện tử- Thiết bị điện ................................................................................. 8
Giao thông – Vận tải – Tàu thủy ......................................................................... 11
Cơ khí – Chế tạo ................................................................................................... 11
Luyện kim – Sản phẩm kim loại .......................................................................... 12
Gỗ ........................................................................................................................... 14
Xây dựng – Vật liệu xây dựng ............................................................................. 14
Đo lường và phép đo, hiện tượng vật lý .............................................................. 15
Chất dẻo – Cao su ................................................................................................. 16
Hóa học ................................................................................................................. 17
Dầu mỏ ................................................................................................................... 17
Gốm sứ - Thủy tinh .............................................................................................. 18
Dệt may .................................................................................................................. 18
Y tế - Chăm sóc sức khỏe ..................................................................................... 18
Thực phẩm ............................................................................................................ 18
An toàn – môi trường .......................................................................................... 18
Thử nghiệm .......................................................................................................... 19
2
Chi tiết
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
TIÊU CHUẨN QUỐC GIA (TCVN)
Chất lượng nước Trở về đầu trang
1 TCVN 10756:2016
Chất lượng nước. Xác định nồng độ hoạt độ polini
210 trong nước bằng phương pháp phổ alpha
20
2 TCVN 10757:2016
Chất lượng nước. Xác định nồng độ hoạt độ cacbon
14. Phương pháp đếm nhấp nháy lỏng
26
3
TCVN 11125:2015
Chất lượng nước. Sự hấp phụ của các chất lên bùn
hoạt hóa. Phép thử theo mẻ sử dụng phương pháp
phân tích đặc trưng
17
4
TCVN 11126:2015
Chất lượng nước.Phép thử độc tính để đánh giá sự
ức chế quá trình nitrat hóa của vi sinh vật trong bùn
hoạt hóa
17
5
TCVN 11127:2015
Chất lượng nước. Đánh giá quá trình phân hủy sinh
học hiếu khí của các hợp chất hữu cơ trong môi
trường nước. Phương pháp bùn hoạt hóa bán liên
tục
15
6 TCVN 6181-3:2015
Chất lượng nước. Xác định xyanua. Phần 3: Xác
định xyanogen clorua
13
7 TCVN 6830:2016
Thay thế:TCVN 6831:2001
Chất lượng nước. Xác định nồng độ hoạt độ triti.
Phương pháp đếm nhấp nháy lỏng
28
Hóa chất Trở về đầu trang
8
TCVN 11052:2015
Chất hoạt động bề mặt không ion. Dẫn xuất
polyetoxylat. Xác định nhóm oxyetylen bằng
phương pháp chuẩn độ iôt
12
9
TCVN 11053:2015 Chất hoạt động bề mặt. Xà phòng. Xác định hàm
lượng nhỏ của glycerol tự do bằng phép đo phổ hấp
thụ phân tử
9
10
TCVN 11054:2015 Chất hoạt động bề mặt. Ancol và alkylphenol
etoxylat sulfat hóa. Xác định tổng hàm lượng chất
hoạt động
8
11
TCVN 11055:2015
Chất hoạt động bề mặt. Ancol và alkylphenol
etoxylat sulfat hóa. Xác định giá trị trung bình khối
lượng phân tử tương đối
12
12 TCVN 11056:2015
Chất hoạt động bề mặt. Xác định hàm lượng sulfat
khoáng. Phương pháp chuẩn độ
9
13 TCVN 11057:2015 Chất hoạt động bề mặt. Xác định sức căng bề mặt 19
3
phân cách. Phương pháp kéo màng chất lỏng
14 TCVN 11058:2015
Chất hoạt động bề mặt. Bột giặt. Xác định các sulfat
vô cơ bằng phương pháp khối lượng
10
15 TCVN 11059:2015
Chất hoạt động bề mặt. Bột giặt. Xác định hàm
lượng silica tổng bằng phương pháp khối lượng
9
16 TCVN 11060:2015
Chất hoạt động bề mặt. Xác định sức căng bề mặt
phân cách. Phương pháp thể tích giọt
23
17
TCVN 11061-1:2015
Chất hoạt động bề mặt. Xác định hàm lượng axit
cloaxetic (cloaxetat). Phần 1: Phương pháp sắc ký
lỏng hiệu năng cao (HPLC)
12
18
TCVN 11061-2:2015
Chất hoạt động bề mặt. Xác định hàm lượng axit
cloaxetic (cloaxetat). Phần 2: Phương pháp sắc ký
ion
12
Công nghệ thông tin Trở về đầu trang
19 TCVN 11385:2016
Công nghệ thông tin. Các kỹ thuật an toàn. Đánh
giá an toàn sinh trắc học
54
20 TCVN 11386:2016
Công nghệ thông tin. Các kỹ thuật an toàn. Phương
pháp đánh giá an toàn công nghệ thông tin
259
21 TCVN 11393-1:2016 Công nghệ thông tin. Các kỹ thuật an toàn. Chống
chối bỏ. Phần 1: Tổng quan
33
22
TCVN 11393-2:2016
Công nghệ thông tin. Các kỹ thuật an toàn. Chống
chối bỏ. Phần 2: Các cơ chế sử dụng kỹ thuật đối
xứng
27
23 TCVN 11393-3:2016
Công nghệ thông tin. Các kỹ thuật an toàn. Chống
chối bỏ. Phần 3: Các cơ chế sử dụng kỹ thuật phi
đối xứng
24
24
QCVN 102:2016/BTTTT
Quy chuẩn kỹ thuật quốc gia về cấu trúc mã định
danh và định dạng dữ liệu gói tin phục vụ kết nối
các hệ thống quản lý văn bản và điều hành
40
Cao su và chất dẻo Trở về đầu trang
25 TCVN 11019:2015 Cao su. Hướng dẫn hiệu chuẩn thiết bị thử nghiệm 26
26 TCVN 11020:2015
Cao su lưu hóa hoặc nhiệt dẻo. Các sản phẩm chống
tĩnh điện và dẫn điện. Xác định điện trở
17
27 TCVN 4860:2015
Thay thế:TCVN 4860:2007
Cao su và chất dẻo. Polyme phân tán và các loại
latex cao su. Xác định pH
13
28 TCVN 11023:2015 Chất dẻo. Chuẩn bị mẫu thử bằng máy 22
29 TCVN 11024:2015 Chất dẻo. Xác định sự thay đổi màu sắc và biến tính 26
4
chất sau khi phơi nhiễm với ánh sáng ban ngày dưới
kính, thời tiết tự nhiên hoặc nguồn sáng phòng thí
nghiệm
30 TCVN 11025:2015 Chất dẻo. Đúc ép mẫu thử vật liệu nhiệt dẻo 14
31
TCVN 11026-1:2015
Chất dẻo. Đúc phun mẫu thử vật liệu nhiệt dẻo.
Phần 1: Nguyên tắc chung, đúc mẫu thử đa mục
đích và mẫu thử dạng thanh
30
32 TCVN 11026-2:2015
Chất dẻo. Đúc phun mẫu thử vật liệu nhiệt dẻo.
Phần 2: Thanh kéo nhỏ
7
33 TCVN 11026-3:2015 Chất dẻo. Đúc phun mẫu thử vật liệu nhiệt dẻo.
Phần 3: Tấm nhỏ
13
34 TCVN 11026-4:2015 Chất dẻo. Đúc phun mẫu thử vật liệu nhiệt dẻo.
Phần 4: Xác định độ co ngót đúc
16
35 TCVN 11027:2015 Chất dẻo. Đúc ép mẫu thử vật liệu nhiệt rắn 18
36
TCVN 6039-1:2015
Thay thế:TCVN 6039-
1:2008
Chất dẻo. Xác định khối lượng riêng của chất dẻo
không xốp. Phần 1: Phương pháp ngâm, phương
pháp picnomet lỏng và phương pháp chuẩn độ
16
37 TCVN 4857:2015
Thay thế:TCVN 4857:2007
Latex cao su thiên nhiên cô đặc. Xác định độ kiềm 11
38 TCVN 4856:2015
Thay thế:TCVN 4856:2007
Latex cao su thiên nhiên cô đặc. Xác định trị số
KOH
15
Dầu mỏ Trở về đầu trang
39
TCVN 11050:2015
Etanol nhiên liệu. Xác định hàm lượng sulfat vô cơ
có sẵn, sulfat vô cơ tiềm ẩn và clorua vô cơ tổng
bằng phương pháp sắc ký ion sử dụng bơm mẫu
nước
20
40
TCVN 11051:2015
Nhiên liệu điêzen sinh học (B100) và hỗ hợp của
nhiên liệu điêzen sinh học với nhiên liệu dầu mỏ
phần cất trung bình. Phương pháp xác định độ ổn
định oxy hóa (phương pháp tăng tốc)
17
41
TCVN 11152:2015
Nhiên liệu khoáng rắn. Than đá. Xác định hàm
lượng ẩm trong mẫu thử phân tích chung bằng cách
làm khô trong nitơ
9
42 TCVN 11154:2015
Dầu mỏ và sản phẩm dầu mỏ dạng lỏng. Hiệu chuẩn
bể chứa bằng phép đo chất lỏng. Phương pháp tăng
dần sử dụng đồng hồ đo thể tích
32
43 TCVN 11155-1:2015
Dầu mỏ và sản phẩm dầu mỏ dạng lỏng. Hiệu chuẩn
bể trụ ngang. Phần 1: Phương pháp thủ công
25
44 TCVN 11155-2:2015 Dầu mỏ và sản phẩm dầu mỏ dạng lỏng. Hiệu chuẩn 21
5
bể trụ ngang. Phần 2: Phương pháp đo dải khoảng
cách quang điện bên trong
45 TCVN 11156-1:2015
Dầu mỏ và sản phẩm dầu mỏ dạng lỏng. Hiệu chuẩn
bể trụ đứng. Phần 1: Phương pháp thước quấn
77
46
TCVN 11156-2:2015
Dầu mỏ và sản phẩm dầu mỏ dạng lỏng. Hiệu chuẩn
bể trụ đứng. Phần 2: Phương pháp đường quang
chuẩn
34
47 TCVN 11156-3:2015
Dầu mỏ và sản phẩm dầu mỏ dạng lỏng. Hiệu chuẩn
bể trụ đứng. Phần 3: Phương pháp tam giác quang
46
48
TCVN 11156-4:2015
Dầu mỏ và sản phẩm dầu mỏ dạng lỏng. Hiệu chuẩn
bể trụ đứng. Phần 4: Phương pháp đo dải khoảng
cách quang điện bên trong
26
49
TCVN 11156-5:2015
Dầu mỏ và sản phẩm dầu mỏ dạng lỏng. Hiệu chuẩn
bể trụ đứng. Phần 5: Phương pháp đo dải khoảng
cách quang điện bên ngoài
19
50 TCVN 175:2015
Thay thế:TCVN 175-1995
Nhiên liệu khoáng rắn - Xác định hàm lượng lưu
huỳnh tổng - Phương pháp Eschka
12
51 TCVN 8063:2015
Thay thế:TCVN 8063:2009
Xăng không chì pha 5% etanol. Yêu cầu kỹ thuật và
phương pháp thử
9
52 TCVN 8064:2015
Thay thế:TCVN 8064:2009
Nhiên liệu điêzen pha 5% este metyl axit béo. Yêu
cầu kỹ thuật và phương pháp thử
9
53 TCVN 8401:2015
Thay thế:TCVN 8401:2011
Xăng không chì pha 10% etanol. Yêu cầu kỹ thuật
và phương pháp thử
9
Đo lường và phép đo, hiện tượng vật lý Trở về đầu trang
54
TCVN 11111-5:2015
Âm học. Mức chuẩn zero để hiệu chuẩn thiết bị đo
thính lực. Phần 5: Mức áp suất âm ngưỡng tương
đương chuẩn đối với âm đơn trong dải tần số từ 8
kHz đến 16 kHz
11
55
TCVN 11111-6:2015
Âm học. Mức chuẩn zero để hiệu chuẩn thiết bị đo
thính lực. Phần 6: Ngưỡng nghe chuẩn đối với tín
hiệu thử khoảng thời gian ngắn
14
56
TCVN 11111-7:2015
Âm học. Mức chuẩn zero để hiệu chuẩn thiết bị đo
thính lực. Phần 7: Ngưỡng nghe chuẩn trong các
điều kiện nghe trường âm tự do và trường âm
khuếch tán
14
57
TCVN 11111-8:2015
Âm học. Mức chuẩn zero để hiệu chuẩn thiết bị đo
thính lực. Phần 8: Mức áp suất âm ngưỡng tương
đương chuẩn đối với âm đơn và tai nghe chụp kín
tai
11
6
58
TCVN 11111-9:2015
Âm học. Mức chuẩn zero để hiệu chuẩn thiết bị đo
thính lực. Phần 9: Các điều kiện thử ưu tiên để xác
định mức ngưỡng nghe chuẩn
15
59 QCVN 101:2016/BTTTT Quy chuẩn kỹ thuật quốc gia về pin Lithium cho
thiết bị cầm tay
24
60
QCVN 21:2016/BYT
Quy chuẩn kỹ thuật quốc gia về điện từ trường tàn
số cao - mức tiếp xúc cho phép điện từ trường tần
số cao tại nơi làm việc
9
61 QCVN 22:2016/BYT
Quy chuẩn kỹ thuật quốc gia về chiếu sáng - mức
cho phép chiếu sáng nơi làm việc
23
62
QCVN 23:2016/BYT
Quy chuẩn kỹ thuật quốc gia về bức xạ tử ngoại -
mức tiếp xúc cho phép bức xạ tử ngoại tại nơi làm
việc
11
63
QCVN 25:2016/BYT
Quy chuẩn kỹ thuật quốc gia về điện từ trường tần
số công nghiệp - mức tiếp xúc cho phép tiếng điện
từ trường tần số công nghiệp tại nơi làm việc
8
64
QCVN 29:2016/BYT
Quy chuẩn kỹ thuật quốc gia về bức xạ ion hóa -
giới hạn liều tiếp xúc bức xạ ion hóa tại nơi làm
việc
15
65 QCVN 30:2016/BYT
Quy chuẩn kỹ thuật quốc gia về bức xạ tia X - giới
hạn liều tiếp xúc bức xạ tia X nơi làm việc
13
Giáo dục Trở về đầu trang
66 TCVN 10779:2015 Hệ thống quản lý chất lượng. Hướng dẫn áp dụng
TCVN ISO 9001:2008 trong giáo dục
34
Khai thác mỏ và khoáng sản Trở về đầu trang
67
TCVN 11048:2015 Sản phẩm hóa học dạng lỏng và dạng rắn. Xác định
hàm lượng nước bằng phương pháp chuẩn độ thể
tích karl fischer
68
TCVN 11138:2015
Quặng và tinh quặng mangan. Xác định hàm lượng
niken. Phương pháp đo phổ dimetylglyoxim và
phương pháp đo phổ hấp thụ nguyên tử ngọn lửa
15
69 TCVN 318:2015
Thay thế:TCVN 0318:2009
Than và cốc. Tính kết quả phân tích ở những trạng
thái khác nhau
12
70 TCVN 4778:2015
Thay thế:TCVN 4778:2009
Than. Xác định tỷ khối dùng cho lò luyện cốc 12
71 TCVN 8621:2015
Thay thế:TCVN 8621:2010
Than. Phân tích các nguyên tố chính 9
72 TCVN 8623:2015
Thay thế:TCVN 8623:2010
Than. Lựa chọn phương pháp xác định các nguyên
tố dạng vết
15
7
Hệ thống và bộ phận thủy lực Trở về đầu trang
73 TCVN 10645:2014 Hệ thống và bộ phận truyền động thủy lực/khí nén 161
74
TCVN 10647:2014
Truyền động thủy lực. Xy lanh. Kích thước và dung
sai của rãnh lắp vòng làm kín trên pít tông và cân
pít tông tác động đơn trong ứng dụng có chuyển
động tịnh tiến
20
75
TCVN 10648:2014 Truyền động thủy lực. Xy lanh. Rãnh lắp vòng làm
kín trên pít tông lắp vào vòng ổ trục. Kích thước và
dung sai
9
76
TCVN 10652:2014
Truyền động thủy lực. Kích thước lắp cho các phụ
tùng của xy lanh có cần pit tông đơn, loạt trung bình
16 MPa
(160 bar) và loạt 25 MPa (250 bar)
21
Chăm sóc sức khỏe Trở về đầu trang
77 ĐLVN 265:2016
Thay thế:ĐLVN 0265:2014
Phương tiện đo nồng độ SO2, CO2, CO, NOx trong
không khí. Quy trình kiểm định
12
78 ĐLVN 333:2016
Phương tiện đo nồng độ SO2, CO, NO, NO2 của
trạm quan trắc không khí tự động, liên tục. Quy
trình kiểm định
12
79 QCVN 12:2016/BKHCN
Quy chuẩn kỹ thuật quốc gia đối với thiết bị chụp
cắt lớp vi tính dùng trong y tế 24
80 QCVN 24:2016/BYT
Quy chuẩn kỹ thuật quốc gia về tiếng ồn - mức tiếp
xúc cho phép tiếng ồn tại nơi làm việc
9
81 QCVN 26:2016/BYT
Quy chuẩn kỹ thuật quốc gia về vị khí hậu - giá trị
cho phép vi khí hậu tại nơi làm việc
9
82 QCVN 27:2016/BYT
Quy chuẩn kỹ thuật quốc gia về rung - muéc rung
cho phép nơi làm việc
10
TIÊU CHUẨN NƯỚC NGOÀI
Công nghệ thông tin Trở về đầu trang
83 JIS B 0420-1:2016
Geometrical product specifications (GPS) --
Dimensional tolerancing -- Part 1: Linear sizes 43
84 BS EN ISO 14405-1:2016
Replace: BS EN ISO 14405-1:2010
Geometrical product specifications (GPS).
Dimensional tolerancing. Linear sizes 68
85 ISO/IEC TR 38504:2016
Governance of information technology --
Guidance for principles-based standards in the
governance of information technology
8
86 PD ISO/IEC TS 33072:2016
Information technology. Process assessment.
Process capability assessment model for
196
8
information security management.
87 BS ISO 2901:2016
ISO metric trapezoidal screw threads. Basic
and design profiles. 16
Điện – Điện tử- Thiết bị điện Trở về đầu trang
88 BS EN 61784-3:2016
Replace: BS EN 61784-3:2010
Industrial communication networks. Profiles.
Functional safety fieldbuses. General rules and
profile definitions
86
89
CISPR 16-1-5/AMD1:2016
PRV
Replace: CISPR 16-1-5:2014
Amendment 1 - Specification for radio
disturbance and immunity measuring apparatus
and methods - Part 1-5: Radio disturbance and
immunity measuring apparatus - Antenna
calibration sites and reference test sites for 5
MHz to 18 GHz
3
90
CISPR 16-2-3:2016 RLV
Replace: CISPR 16-2-3:2016
Specification for radio disturbance and
immunity measuring apparatus and methods -
Part 2-3: Methods of measurement of
disturbances and immunity - Radiated
disturbance measurements
317
91
CISPR 25:2016 PRV
Replace: CISPR
25:2008/COR1:2009
Vehicles, boats and internal combustion
engines - Radio disturbance characteristics -
Limits and methods of measurement for the
protection of on-board receivers
317
92 IEC 60092-202:2016 RLV
Replace: IEC 60092-202:2016
Electrical installations in ships - Part 202:
System design - Protection
62
93 IEC 60092-353:2016 RLV
Replace: IEC 60092-353:2016
Electrical installations in ships - Part 353:
Power cables for rated voltages 1 kV and 3 kV
64
94 IEC 60127-5:2016 PRV
Replace: IEC 60127-5:1988
Miniature fuses - Part 5: Guidelines for quality
assessment of miniature fuse-links
24
95 IEC 60335-2-105:2016 PRV
Replace: IEC 60335-2-
105:2004/AMD2:2013
Household and similar electrical appliances -
Safety - Part 2-105: Particular requirements for
multifunctional shower cabinets
36
96
IEC 60335-2-109/AMD2:2016
PRV
Replace: IEC 60335-2-
109:2010/AMD1:2013
Amendment 2 - Household and similar
electrical appliances - Safety - Part 2-109:
Particular requirements for UV radiation water
treatment appliances
5
97
IEC 60335-2-30/AMD1:2016
PRV
Replace: IEC 60335-2-
30:2009/COR1:2014
Amendment 1 - Household and similar
electrical appliances - Safety - Part 2-30:
Particular requirements for room heaters
22
98
IEC 60335-2-34/AMD2:2016
PRV
Replace: IEC 60335-2-
34:2012/AMD1:2015/COR1:2015
Amendment 2 - Household and similar
electrical appliances - Safety - Part 2-34:
Particular requirements for motor-compressors
19
9
99
IEC 60335-2-35/AMD1:2016
PRV
Replace: IEC 60335-2-35:2012
Amendment 1 - Household and similar
electrical appliances - Safety - Part 2-35:
Particular requirements for instantaneous water
heaters
5
100 IEC 60695-10-3:2016
Replace: IEC 60695-10-3:2002
Fire hazard testing - Part 10-3: Abnormal heat
- Mould stress relief distortion test
21
101 IEC 60695-1-10:2016 PRV
Replace: IEC 60695-1-10:2009
Fire hazard testing - Part 1-10: Guidance for
assessing the fire hazard of electrotechnical
products - General guidelines
51
102
IEC 60695-1-21:2016
Replace: IEC TR 60695-1-
21:2008
Fire hazard testing - Part 1-21: Guidance for
assessing the fire hazard of electrotechnical
products - Ignitability - Summary and
relevance of test methods
69
103 IEC 60695-8-1:2016 PRV
Replace: IEC 60695-8-1:2008
Fire hazard testing - Part 8-1: Heat release -
General guidance
53
104 IEC 60695-8-2:2016 PRV
Replace: IEC TR 60695-8-2:2008
Fire hazard testing - Part 8-2: Heat release -
Summary and relevance of test methods
53
105 IEC 60794-3-20:2016
Replace: IEC 60794-3-20:2009
Optical fibre cables - Part 3-20: Outdoor
cables - Family specification for self-
supporting aerial telecommunication cables
29
106
IEC 61169-54:2016
Radio frequency connectors - Part 54:
Sectional specification for coaxial connectors
with 10 mm inner diameter of outer conductor,
nominal characteristic impedance 50 Ohms,
Series 4.3-10
69
107 IEC 61332:2016 PRV
Replace: IEC 61332:2005
Soft ferrite material classification 10
108
IEC 61400-25-4:2016 PRV
Replace: IEC 61400-25-4:2008
Wind energy generation systems - Part 25-4:
Communications for monitoring and control of
wind power plants - Mapping to
communication profile
488
109
IEC 61643-351:2016 PRV
Components for low-voltage surge protective
devices - Part 351: Performance requirements
and test methods for telecommunications and
signalling network surge isolation transformers
(SIT)
53
110
IEC 61853-2:2016
Photovoltaic (PV) module performance testing
and energy rating - Part 2: Spectral
responsivity, incidence angle and module
operating temperature measurements
39
111
IEC 61975:2010+AMD1:2016
CSV
Replace: IEC
61975:2010/AMD1:2016
High-voltage direct current (HVDC)
installations - System tests
337
10
112
IEC 61987-16:2016 PRV
Industrial-process measurement and control -
Data structures and elements in process
equipment catalogues - Part 16: Lists of
properties (LOPs) for density measuring
equipment for electronic data exchange
40
113 IEC 62040-2:2016 PRV
Replace: IEC 62040-
2:2005/COR1:2011
Uninterruptible power systems (UPS) - Part 2:
Electromagnetic compatibility (EMC)
requirements
93
114
IEC 62282-3-400:2016 PRV
Fuel cell technologies - Part 3-400: Stationary
fuel cell power systems - Small stationary fuel
cell power system with combined heat and
power output
400
115 IEC 62679-3-3:2016
Electronic paper displays - Part 3-3: Optical
measuring methods for displays with
integrated lighting units
41
116 IEC 62873-2:2016 Residual current operated circuit-breakers for
household and similar use - Part 2: Residual
current devices (RCDs) - Vocabulary
30
117
IEC 62873-3-1:2016
Residual current operated circuit-breakers for
household and similar use - Part 3-1: Particular
requirements for RCDs with screwless-type
terminals for external copper conductors
14
118
IEC 62873-3-2:2016
Residual current operated circuit-breakers for
household and similar use - Part 3-2: Particular
requirements for RCDs with flat quick-connect
terminations
13
119
IEC 62873-3-3:2016
Residual current operated circuit-breakers for
household and similar use - Part 3-3: Specific
requirements for RCDs with screw-type
terminals for external untreated aluminium
conductors and with aluminium screw-type
terminals for use with copper or with
aluminium conductors
17
120 IEC 62922:2016 PRV
Organic light emitting diode (OLED) panels
for general lighting - Performance
requirements
49
121 IEC 82304-1:2016 PRV
Health software - Part 1: General requirements
for product safety
55
122
IEC TR 61156-1-6:2016
Multicore and symmetrical pair/quad cables
for digital communications - Part 1-6: Nominal
DC-resistance values of floor-wiring and
work-area cables for digital communications
123 IEC TR 63021:2016
Rotating electrical machinery - Natural
graphite brush for slip-ring in wound rotor-
type induction motor - Application information
12
11
124 ISO 20168:2016
Resistance welding -- Locking tapers for
electrode holders and electrode caps
4
125 ISO/IEC TR 38504:2016
Governance of information technology -
Guidance for principles-based standards in the
governance of information technology
8
126 PD CLC/TS 50131-2-9:2016
Alarm systems. Intrusion and hold-up systems.
Intrusion detectors. Active infrared beam
detectors
40
Giao thông – Vận tải – Tàu thủy Trở về đầu trang
127
ASTM F3061/F3061M-16a
Replace: ASTM F3061/F3061M-
16
Standard Specification for Systems and
Equipment in Small Aircraft
45
128 ASTM F3201-16
Standard Practice for Ensuring Dependability
of Software Used in Unmanned Aircraft
Systems (UAS)
11
129 BS ISO 17987-4:2016
Road vehicles. Local Interconnect Network
(LIN). Electrical physical layer (EPL)
specification 12 V/24 V
38
130
ISO 18495-1:2016
Intelligent transport systems -- Commercial
freight -- Automotive visibility in the
distribution supply chain -- Part 1:
Architecture and data definitions
25
131 ISO 21028-1:2016
Replace: ISO 21028-1:2004
Cryogenic vessels -- Toughness requirements
for materials at cryogenic temperature -- Part
1: Temperatures below -80 degrees C
7
132 ISO 4302:2016
Replace: ISO 4302:1981
Cranes -- Wind load assessment 22
Cơ khí – Chế tạo Trở về đầu trang
133
ASTM F2403
Standard Specification for Inch Series
Machine Screws, Carbon Steel, 60 000 psi
Tensile Strength (Withdrawn 2016) has been
withdrawn, with no replacement.
10
134 ASTM F2832-11(2016)
Replace: ASTM F2832-11
Standard Guide for Accelerated Corrosion
Testing for Mechanical Fasteners
5
135 ISO 10898:2016
Replace: ISO 10898:1992
Spot drills 4
136
ISO 12131-2:2016
Replace: ISO 12131-2:2001
Plain bearings -- Hydrodynamic plain thrust
pad bearings under steady-state conditions --
Part 2: Functions for the calculation of thrust
pad bearings
10
137 ISO 12167-1:2016 Plain bearings -- Hydrostatic plain journal 32
12
Replace: ISO 12167-1:2001 bearings with drainage grooves under steady-
state conditions -- Part 1: Calculation of oil-
lubricated plain journal bearings with drainage
grooves
138 ISO 27306:2016
Replace: ISO 27306:2009
Metallic materials -- Method of constraint loss
correction of CTOD fracture toughness for
fracture assessment of steel components
49
139 ISO 8051:2016
Replace: ISO 8051:1999
Long shank taps with nominal diameters from
M3 to M10 -- Full-diameter shank taps with
recess
4
140 JIS D 9414:2016
Replace:JIS D 9414:2008
Bicycles -- Brakes 26
Luyện kim – Sản phẩm kim loại Trở về đầu trang
141
ASTM A1008/A1008M-16
Replace: ASTM A1008/A1008M-
15
Standard Specification for Steel, Sheet, Cold-
Rolled, Carbon, Structural, High-Strength
Low-Alloy, High-Strength Low-Alloy with
Improved Formability, Solution Hardened, and
Bake Hardenable
15
142
ASTM A1018/A1018M-16a
Replace: ASTM A1018/A1018M-
16
Standard Specification for Steel, Sheet and
Strip, Heavy-Thickness Coils, Hot-Rolled,
Carbon, Commercial, Drawing, Structural,
High-Strength Low-Alloy, High-Strength
Low-Alloy with Improved Formability, and
Ultra-High Strength
8
143
ASTM A1022/A1022M-16b
Replace: ASTM A1022/A1022M-
16a
Standard Specification for Deformed and Plain
Stainless Steel Wire and Welded Wire for
Concrete Reinforcement
10
144 ASTM A109/A109M-16
Replace: ASTM A109/A109M-15
Standard Specification for Steel, Strip, Carbon
(0.25 Maximum Percent), Cold-Rolled
9
145
ASTM A182/A182M-16a
Replace: ASTM A182/A182M-16
Standard Specification for Forged or Rolled
Alloy and Stainless Steel Pipe Flanges, Forged
Fittings, and Valves and Parts for High-
Temperature Service
15
146 ASTM A249/A249M-16a
Replace: ASTM A249/A249M-16
Standard Specification for Welded Austenitic
Steel Boiler, Superheater, Heat-Exchanger,
and Condenser Tubes
10
147 ASTM A268/A268M-10(2016)
Replace: ASTM A268/A268M-10
Standard Specification for Seamless and
Welded Ferritic and Martensitic Stainless Steel
Tubing for General Service
7
148 ASTM A312/A312M-16a
Replace: ASTM A312/A312M-16
Standard Specification for Seamless, Welded,
and Heavily Cold Worked Austenitic Stainless
Steel Pipes
13
149 ASTM A369/A369M-11(2016) Standard Specification for Carbon and Ferritic
Alloy Steel Forged and Bored Pipe for High-
5
13
Replace: ASTM A369/A369M-11 Temperature Service
150 ASTM A580/A580M-16
Replace: ASTM A580/A580M-15
Standard Specification for Stainless Steel Wire 5
151 ASTM A693-16
Replace: ASTM A693-13
Standard Specification for Precipitation-
Hardening Stainless and Heat-Resisting Steel
Plate, Sheet, and St
8
152 ASTM A789/A789M-16a
Replace: ASTM A789/A789M-16
Standard Specification for Seamless and
Welded Ferritic/Austenitic Stainless Steel
Tubing for General Service
6
153 ASTM C1767-16a
Replace: ASTM C1767-16
Standard Specification for Stainless Steel
Jacketing for Insulation
7
154 ASTM C1767M-16a
Replace: ASTM C1767M-16
Standard Specification for Stainless Steel
Jacketing for Insulation
7
155 ASTM E2880-16b
Replace: ASTM E2880-16a
Standard Terminology Related to Biorationals 1
156 ASTM F1200-88(2016)
Replace: ASTM F1200-88(2010)
Standard Specification for Fabricated
(Welded) Pipe Line Strainers (Above 150 psig
and 150#xb0;F)
4
157 BS 1722-12:2016
Replace: BS 1722-12:2006
Fences. Steel palisade fences. Manufacturing
and installation. Specification
44
158 BS 7668:2016
Replace: BS 7668:2004
Weldable structural steels. Hot finished
structural hollow sections in weather resistant
steels. Specification. Specification
26
159 BS ISO 15787:2016
Technical product documentation. Heat-treated
ferrous parts. Presentation and indications.
44
160 ISO 13577-1:2016
Replace: ISO 13577-1:2012
Industrial furnaces and associated processing
equipment -- Safety -- Part 1: General
requirements
45
161
ISO 13577-3:2016
Industrial furnaces and associated processing
equipment -- Safety -- Part 3: Generation and
use of protective and reactive atmosphere
gases
66
162 ISO 17672:2016
Replace: ISO 17672:2010
Brazing -- Filler metals 21
163 ISO 19207:2016
Thermal spraying -- Classification method of
adhesive strength by indentation
13
164 ISO 19477:2016
Metallic and other inorganic coatings --
Measurement of Young's modulus of thermal
barrier coatings by beam bending
14
165 ISO 3677:2016 Filler metal for soldering and brazing -- 2
14
Replace: ISO 3677:1992 Designation
166 JIS G 3114:2016
Replace:JIS G 3114:2008
Hot-rolled atmospheric corrosion resisting
steels for welded structure
16
167 JIS G 3444:2016/AMD1
Pages:2
Carbon steel tubes for general structural
purpose (Amendment 1)
2
168 JIS G 3466:2016/AMD1
Carbon steel square and rectangular tubes for
general structure (Amendment 1)
1
169 JIS G 3477-1:2016/AMD1
Polyethylene coated steel pipes -- Part 1: 3
layer extruded polyethylene coated steel pipes
(Amendment 1)
4
170 JIS G 3477-2:2016/AMD1
Polyethylene coated steel pipes -- Part 2: 2
layer extruded polyethylene coated steel pipes
(Amendment 1)
3
171 JIS G 3477-3:2016/AMD1
Polyethylene coated steel pipes -- Part 3:
External polyethylene powder coated steel
pipes (Amendment 1)
3
172 JIS R 6242:2015
Replace:JIS R 6242:2006
Bonded abrasive products --- General
requirements
27
Gỗ Trở về đầu trang
173 ASTM D4933-16
Replace: ASTM D4933-99(2010)
Standard Guide for Moisture Conditioning of
Wood and Wood-Based
8
Xây dựng – Vật liệu xây dựng Trở về đầu trang
174 ASTM C1063-16b
Replace: ASTM C1063-16a
Standard Specification for Installation of
Lathing and Furring to Receive Interior and
Exterior Portland Cement-Based Plaster
11
175 ASTM C138/C138M-16a
Replace: ASTM C138/C138M-16
Standard Test Method for Density (Unit
Weight), Yield, and Air Content (Gravimetric)
of Concrete
6
176 ASTM C846-16
Replace: ASTM C846-94(2009)
Standard Practice for Application of Cellulosic
Fiber Insulating Board for Wall Sheathing
4
177 BS EN 50290-2-36:2016
Communication cables. Common design rules
and construction. Crosslinked Silicone rubber
insulation compound
10
178
ISO 1219-3:2016
Fluid power systems and components --
Graphical symbols and circuit diagrams -- Part
3: Symbol modules and connected symbols in
circuit diagrams
23
179 ISO 6385:2016
Replace: ISO 6385:2004
Ergonomics principles in the design of work
systems
15
180 ISO/TS 11672:2016 Connectors for fluid power and general use -- 15
15
Designation and nomenclature
181
JIS A 1481-2:2016
Replace:JIS A 1481-2:2014
Determination of asbestos in building material
products -- Part 2: Sampling and qualitative
analysis for judgement of existence of
containing asbestos
32
182
JIS A 1481-3:2014
Replace:JIS A 1481:2008
Determination of asbestos in building material
products -- Part 3: Quantitative analysis of
containing asbestos by X-ray diffraction
method
31
183 JIS A 5361:2016
Replace:JIS A 5361:2010
Precast concrete products -- General rules for
classification, designation and marking
13
184 JIS A 5364:2016
Replace:JIS A 5364:2010
Precast concrete products. General rules of
materials and product methods
12
185 JIS A 5365:2016
Replace:JIS A 5365:2010
Precast concrete products -- General rules for
methods of inspection
13
186 JIS A 5908:2015
Replace:JIS A 5908:2003
Particleboards 46
187 JIS S 1032:2016
Replace:JIS S 1032:2004
Office furniture --- Chairs 22
188 JIS S 1043:2016 Office furniture -- Seat height adjustable
swivel chairs
12
Đo lường và phép đo, hiện tượng vật lý Trở về đầu trang
189 ASTM C1071-16
Replace: ASTM C1071-12
Standard Specification for Fibrous Glass Duct
Lining Insulation (Thermal and Sound
Absorbing Material)
4
190 ASTM C1290-16
Replace: ASTM C1290-11
Standard Specification for Flexible Fibrous
Glass Blanket Insulation Used to Externally
Insulate HVAC Ducts
4
191 ASTM C1364-16e1
Replace: ASTM C1364-16
Standard Specification for Architectural Cast
Stone
3
192 ASTM C1729M-16a
Replace: ASTM C1729M-16
Standard Specification for Aluminum
Jacketing for Insulation
7
193 ASTM E2793-16
Replace: ASTM E2793-10e1
Standard Guide for Evaluation, Calibration,
and Correlation of E274 Friction Measurement
Systems and Equipment
5
194 ASTM F1201-88(2016)
Replace: ASTM F1201-88(2010)
Standard Specification for Fluid Conditioner
Fittings in Piping Applications Above 0#xb0;F
4
195 ASTM F2764/F2764M-16
Replace: ASTM F2764/F2764M-
Standard Specification for 6 to 60 in. [150 to
1500 mm] Polypropylene (PP) Corrugated
Double and Triple Wall Pipe and Fittings for
9
16
11ae2 Non-Pressure Sanitary Sewer Applications
196 BS EN 3375-009:2016
Replace: BS EN 3375-009:2009
Aerospace series. Cable, electrical, for digital
data transmission. Single braid. CAN Bus. 120
ohms. Type WX. Product standard
14
197
BS EN 4056-003:2016
Aerospace series. Cable ties for harnesses.
Plastic cable ties. Operating temperatures -65
$0DC to 105 $0DC and -65 $0DC to 150
$0DC. Product standard
12
198 BS EN 4534-2:2016
Replace: BS EN 4534-2:2009
Aerospace series. Bushes, plain in aluminium
alloy with self-lubricating liner, elevated load.
Dimensions and loads. Inch series
20
199 BS EN 6080:2016
Aerospace series. Rivet, 100$0D normal flush
head, close tolerance. Inch series.
14
200 BS EN 6081:2016
Aerospace series. Rivet, universal head, close
tolerance. Inch series.
12
201 BS EN 6101:2016 Aerospace series. Rivet, 100$0D medium flush
head, close tolerance. Inch series.
16
202 BS EN 6129:2016
Aerospace series. Blind bolt, protruding head,
high strength, pulltype.
14
203 BS EN ISO 6976:2016
Replace: BS EN ISO 6976:2005
Natural gas. Calculation of calorific values,
density, relative density and Wobbe indices
from composition.
68
204 BS ISO 15471:2016
Replace: BS ISO 15471:2004
Surface chemical analysis. Auger electron
spectroscopy. Description of selected
instrumental performance parameters.
16
205
ISO 16645:2016
Radiological protection -- Medical electron
accelerators -- Requirements and
recommendations for shielding design and
evaluation
75
206
ISO/CIE 11664-5:2016
Replace: ISO 11664-5:2009 (CIE S
014-5/E:2009)
Colorimetry -- Part 5: CIE 1976 L*u*v*
colour space and u', v' uniform chromaticity
scale diagram
8
207 PD CEN/TR 16957:2016
Bio-based products. Guidelines for Life Cycle
Inventory (LCI) for the End-of-life phase.
30
Chất dẻo – Cao su Trở về đầu trang
208 ASTM D2116-16
Replace: ASTM D2116-07(2012)
Standard Specification for FEP Resin Molding
and Extrusion Materials
5
209 ASTM D4349-16
Replace: ASTM D4349-10
Classification System and Basis for
Specification for Polyphenylene Ether (PPE)
Materials has
7
210 ASTM D5205-16 Standard Classification System and Basis for 7
17
Replace: ASTM D5205-10 Specification for Polyetherimide (PEI)
Materials
211 ASTM D8065/D8065M-16
Standard Classification System and Basis for
Specification for Specifying Plastic Films
5
212 ISO 11357-1:2016
Replace: ISO 11357-1:2009
Plastics -- Differential scanning calorimetry
(DSC) -- Part 1: General principles
33
213
ISO 2286-1:2016
Replace: ISO 2286-1:1998
Rubber- or plastics-coated fabrics --
Determination of roll characteristics -- Part 1:
Methods for determination of length, width
and net mass
3
214
ISO 2286-2:2016
Replace: ISO 2286-2:1998
Rubber- or plastics-coated fabrics --
Determination of roll characteristics -- Part 2:
Methods for determination of total mass per
unit area, mass
per unit area of coating and mass per unit area
of substrate
6
215 ISO 2286-3:2016
Replace: ISO 2286-3:1998
Rubber- or plastics-coated fabrics --
Determination of roll characteristics -- Part 3:
Method for determination of thickness
3
216 ISO 6235:2016
Replace: ISO 6235:1995
Rubber, raw -- Determination of block
polystyrene content -- Ozonolysis method
5
217 JIS K 6220-1:2015
Replace:JIS K 6220-1:2001
Rubber compounding ingredients -- Organic
chemicals -- Test methods -- Part 1: General
63
Hóa học Trở về đầu trang
218
ISO 15471:2016
Replace: ISO 15471:2004
Surface chemical analysis -- Auger electron
spectroscopy -- Description of selected
instrumental performance parameters
5
219
ISO 17973:2016
Replace: ISO 17973:2002
Surface chemical analysis -- Medium-
resolution Auger electron spectrometers --
Calibration of energy scales for elemental
analysis
11
Dầu mỏ Trở về đầu trang
220 JIS K 2390:2016
Replace:JIS K 2390:2008
Automotive fuels -- Fatty acid methyl ester
(FAME) as blend stock 8
221 PD CEN/TR 16982:2016
Diesel blends and fuels. Cold filterability
issues.
34
222 ISO 3924:2016
Petroleum products -- Determination of boiling
range distribution -- Gas chromatography
method
25
223 ISO 14224:2016 Petroleum, petrochemical and natural gas 272
18
Replace: ISO 14224:2006 industries -- Collection and exchange of
reliability and maintenance data for equipment
Gốm sứ - Thủy tinh Trở về đầu trang
224
ISO 18610:2016
Fine ceramics (advanced ceramics, advanced
technical ceramics) -- Mechanical properties of
ceramic composites at ambient temperature in
air atmospheric pressure -- Determination of
elastic properties by ultrasonic technique
20
Dệt may Trở về đầu trang
225 ISO 1144:2016
Replace: ISO 1144:1973
Textiles -- Universal system for designating
linear density (Tex System) 11
Y tế - Chăm sóc sức khỏe Trở về đầu trang
226 BS EN ISO 6009:2016
Replace: BS EN ISO 6009:1994
Hypodermic needles for single use. Colour
coding for identification.
18
227 BS EN ISO 7864:2016
Replace: BS EN ISO 7864:1996
Sterile hypodermic needles for single use.
Requirements and test methods.
38
228 BS EN ISO 9626:2016
Replace: BS EN ISO 9626:1995
Stainless steel needle tubing for the
manufacture of medical devices. Requirements
and test methods.
34
229 BS ISO 14243-2:2016
Replace: BS ISO 14243-2:2009
Implants for surgery. Wear of total knee-joint
prostheses. Methods of measurement
14
230 ISO 14242-2:2016
Replace: ISO 14242-2:2000
Implants for surgery -- Wear of total hip-joint
prostheses -- Part 2: Methods of measurement 5
231 ISO 14243-2:2016
Replace: ISO 14243-2:2009
Implants for surgery -- Wear of total knee-joint
prostheses -- Part 2: Methods of measurement
4
Thực phẩm Trở về đầu trang
232 ISO 12824:2016
Replace: ISO 3924:2010
Royal jelly – Specifications 35
233 BS EN ISO 11816-2:2016
Replace: BS EN ISO 11816-2:2003
Milk and milk products. Determination of
alkaline phosphatase activity. Fluorimetric
method for cheese
26
An toàn – môi trường Trở về đầu trang
234 ISO/TS 19700:2016
Replace: ISO/TS 19700:2007
Controlled equivalence ratio method for the
determination of hazardous components of fire
effluents -- Steady-state tube furnace
48
235
BS EN 13204:2016
Replace: BS EN
13204:2004+A1:2012
Double acting hydraulic rescue tools for fire
and rescue service use. Safety and
performance requirements.
60
19
236
BS EN 60068-3-13:2016
Replace: BS EN 60068-2-44:1995,
IEC 60068-2-44:1995
Environmental testing. Supporting
documentation and guidance on Test T.
Soldering
34
237 BS EN 12566-1:2016
Replace: BS EN 12566-1:2000
Small wastewater treatment systems for up to
50 PT. Prefabricated septic tanks
58
238 BS EN 12566-6:2016
Replace: BS EN 12566-6:2013
Small wastewater treatment systems for up to
50 PT. Prefabricated treatment units for septic
tank effluent
56
239 ASTM E2718-16
Replace: ASTM E2718-10
Standard Guide for Financial Disclosures
Attributed to Climate Change
4
240 ASTM E178-16a
Replace: ASTM E178-16
Standard Practice for Dealing With Outlying
Observations Editorial Review Board change
11
241
ASTM C1044-16
Replace: ASTM C1044-12
Standard Practice for Using a Guarded-Hot-
Plate Apparatus or Thin-Heater Apparatus in
the Single-Sided Mode
9
Thử nghiệm Trở về đầu trang
242
ASTM C1764-12(2016)
Replace: ASTM C1764-12
Standard Test Methods for Non Metallic
Plaster Bases (Lath) Used with Portland
Cement Based Plaster in Vertical Wall
Applications
4
243 ASTM C240-16
Replace: ASTM C240-08(2012)
Standard Test Methods of Testing Cellular
Glass Insulation Block 4
244 ASTM D2765-16
Replace: ASTM D2765-11
Standard Test Methods for Determination of
Gel Content and Swell Ratio of Crosslinked
Ethylene Plastics
8
245
ASTM D5508-16
Replace: ASTM D5508-
94a(2009)e1
Standard Test Method for Determination of
Residual Acrylonitrile Monomer in Styrene-
Acrylonitrile Copolymer Resins and Nitrile-
Butadiene Rubber by Headspace-Capillary Gas
Chromatography (HS-CGC)
5
246 ASTM D6184-16
Replace: ASTM D6184-14
Standard Test Method for Oil Separation from
Lubricating Grease (Conical Sieve Method) 4
247
ASTM D7042-16e2
Replace: ASTM D7042-16e1
Standard Test Method for Dynamic Viscosity
and Density of Liquids by Stabinger
Viscometer (and the Calculation of Kinematic
Viscosity)
12
248
ASTM D7097-16a
Replace: ASTM D7097-16
Standard Test Method for Determination of
Moderately High Temperature Piston Deposits
by Thermo-Oxidation Engine Oil Simulation
Test#x2014;TEOST MHT
15
20
249 ASTM E1348-15e1
Replace: ASTM E1348-15
Standard Test Method for Transmittance and
Color by Spectrophotometry Using
Hemispherical Geometr
3
250 ASTM E1502-16
Replace: ASTM E1502-10
Standard Guide for Use of Fixed-Point Cells
for Reference Temperatures 10
251 ASTM E8/E8M-16a
Replace: ASTM E8/E8M-16
Standard Test Methods for Tension Testing of
Metallic Materials 30
252 ASTM F3109-16
Standard Test Method for Verification of
Multi-Axis Force Measuring Platfor 9
253 ASTM F3203-16
Standard Test Method for Determination of
Gel Content of Crosslinked Polyethylene
(PEX) Pipes and Tubing
9
254
ISO 14644-14:2016
Cleanrooms and associated controlled
environments -- Part 14: Assessment of
suitability for use of equipment by airborne
particle concentration
21
255 ISO 17851:2016
Space systems -- Space environment
simulation for material tests -- General
principles and criteria
24
256 ISO 18402:2016 Timber structures -- Structural insulated panel
roof construction -- Test methods 21
257 ISO 18646-1:2016
Robotics -- Performance criteria and related
test methods for service robots -- Part 1:
Locomotion for wheeled robots
13
258 ISO 20088-1:2016
Determination of the resistance to cryogenic
spillage of insulation materials -- Part 1:
Liquid phase
19
259 ISO 22477-10:2016
Geotechnical investigation and testing --
Testing of geotechnical structures -- Part 10:
Testing of piles: rapid load testing
23
260 JIS A 1452:2015
Replace:JIS A 1452:1972
Method of abrasion test for building materials
and part of building construction (falling sand
method)
7
Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa
học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong
trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông
tin, xin vui lòng liên hệ:
1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện
sau:
+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";
21
+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;
+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:
2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
Địa chỉ: 79 Trương Định - Q1 - TP.HCM
ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957
Website: www.cesti.gov.vn Email: [email protected]
Lưu ý
1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.
2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)
Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.