tiÊu chuẨn mỚi thÁng 10/2017lib.iuh.edu.vn/.../2018/03/bantin_tieuchuan_10_2017.pdfdịch vụ...

Dịch vụ Cung cấp Thông tin Trọn gói Tháng 10/2017 1/39

TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH

TRUNG TÂM THÔNG TIN – THƯ VIỆN

TIÊU CHUẨN MỚI THÁNG 10/2017

TIÊU CHUẨN – QUY CHUẨN KỸ THUẬT QUỐC GIA (TCVN-QCVN) ....... 3

Khăn ướt .................................................................................................................. 3

Nông nghiệp(chăn nuôi ) ......................................................................................... 3

Xây dựng – Vật liệu xây dựng ................................................................................. 3

Đóng tàu ................................................................................................................... 3

Máy phát điện .......................................................................................................... 3

Môi trường (Nước thải) ........................................................................................... 3

TIÊU CHUẨN NƯỚC NGOÀI ................................................................................ 3

Vi sinh vật thực phẩm ............................................................................................. 3

Công nghệ thực phẩm (Dầu mỡ động vật và thực vật) .......................................... 4

Công nghệ thực phẩm (Phương pháp thử và phân tích chung đối với thực phẩm,

Đồ uống không cồn, Ngũ cốc) ................................................................................ 4

Nông nghiệp (Máy móc, dụng cụ và thiết bị nông nghiệp) ..................................... 5

Nông nghiệp (Thức ăn chăn nuôi, Thuốc lá) .......................................................... 5

Công nghệ hóa chất ................................................................................................. 5

Dầu mỏ và các công nghệ liên quan ........................................................................ 6

Công nghệ nano ....................................................................................................... 6

Cao su ...................................................................................................................... 6

Chất dẻo ................................................................................................................... 7

Hệ thống và kết cấu chất lỏng (Van, Bơm) ............................................................ 8

Hệ thống và kết cấu chất lỏng (Thiết bị chứa chất lỏng, Hệ thống truyền dẫn chất

lỏng .......................................................................................................................... 8

Quạt ........................................................................................................................ 8

Năng lượng và truyền nhiệt (Năng lượng và truyền nhiệt nói chung, Năng lượng

mặt trời, Năng lượng gió) ........................................................................................ 9

Năng lượng và truyền nhiệt (Pin nhiên liệu, Nhiên liệu sinh học rắn).................... 9

Khai thác mỏ và khoáng sản (Khoáng sản kim loại ) ........................................... 10

Phương tiên giao thông đường bộ - Vận tải .......................................................... 10

Đường sắt .............................................................................................................. 11

Đóng tàu và Kết cấu tàu thủy ............................................................................... 11

Kỹ thuật máy bay và tàu vũ trụ ............................................................................. 12

Cơ khí chính xác. Kim hoàn .................................................................................. 13

Chế tạo (Hệ thống tự động hóa công nghiệp)........................................................ 13

Chế tạo (Hàn đồng và hàn thiếc) ........................................................................... 13


Chế tạo (Máy công cụ- Lò điện) ............................................................................ 14

Chế tạo (Thiết bị làm việc không phoi) ................................................................ 14

Chế tạo (Dụng cụ cầm tay) .................................................................................... 14

Chế tạo (Xử lý bề mặt và mạ) ............................................................................... 15

Hệ thống và kết cấu cơ khí (Ổ đỡ, Trục và khớp nối, Chi tiết lắp xiết)................ 16

Thiết bị xếp dỡ vật liệu (Cần trục, Xe nâng, Phụ kiện băng tải ) .......................... 16

Luyện kim (Kim loại màu) .................................................................................... 17

Luyện kim (Kim loại đen - Sản phẩm sắt thép) .................................................... 17

Luyện kim (Thử nghiệm kim loại – Ăn mòn kim loại) ........................................ 17

Điện tử ................................................................................................................... 17

Kỹ thuật điện.......................................................................................................... 19

Công nghệ ảnh ....................................................................................................... 21

Công nghệ thông tin và ứng dụng ......................................................................... 21

Ký hiệu đồ họa (Ký hiệu thông tin công cộng) ..................................................... 23

Viễn thông. Kỹ thuật âm thanh và hình ảnh ......................................................... 23

Vật liệu xây dựng và xây dựng nhà ....................................................................... 25

Xây dựng dân dụng (Làm đất) .............................................................................. 28

May mặc . Công nghệ dệt may và da .................................................................... 28

Sơn và vecni .......................................................................................................... 29

Giấy và cactông .................................................................................................... 29

Thủy tinh và gốm (Gốm) ...................................................................................... 29

Công nghệ chăm sóc sức khỏe (Thiết bị y tế) ....................................................... 30

Dược phẩm ............................................................................................................ 31

Thiết bị gia dụng – Giải trí .................................................................................... 31

Bảo vệ sức khỏe. An toàn (An toàn bức xạ, Kiểm soát thảm họa và tai nạn, Thiết

bị bảo vệ) ............................................................................................................... 34

Bảo vệ sức khỏe. An toàn (Phòng cháy, Phòng nổ, Chống điện giật, Rung và xóc,

Hệ thống cảnh báo)................................................................................................ 34

Bảo vệ sức khỏe. An toàn (Công thái học, An toàn máy) ..................................... 35

Bảo vệ môi trường (Sản phẩm sinh học, Ghi nhãn sinh thái) Trở về đầu trang 35

Môi trường (Chất lượng không khí, Phòng sạch, Phát thải của phương tiện giao

thông) ..................................................................................................................... 35

Môi trường (Chất lượng nước) .............................................................................. 36

Đo lường và phép đo (Đo tuyến tính và đo góc, Đo lưu lượng chất lỏng) ........... 36

Đo lường và phép đo (Phép đo đại lượng điện và từ, Phép đo bức xạ) ................ 37

Âm học và phép đo âm ......................................................................................... 37

Thử nghiệm (Thử nghiệm không phá hủy, Thử nghiệm môi trường) ................... 38

Thử nghiệm (Phân tích cỡ hạt) ............................................................................. 38

Dịch vụ. Tổ chức, quản lý và chất lượng công ty ................................................. 38

Bao gói và phân phối hàng hóa ............................................................................. 39


Tài liệu sản phẩm kỹ thuật ..................................................................................... 39

TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4

TIÊU CHUẨN – QUY CHUẨN KỸ THUẬT QUỐC GIA (TCVN-QCVN)

Khăn ướt Trở về đầu trang

1 TCVN 11528:2016 Khăn ướt sử dụng một lần 21

Nông nghiệp(chăn nuôi ) Trở về đầu trang

2 TCVN 8736:2011 Thuốc thú y. Phương pháp định lượng tổng số

bào tử bacillus

12

Xây dựng – Vật liệu xây dựng Trở về đầu trang

3 TCVN 11815:2017 Thiết kế công trình phụ trợ trong thi công cầu 167

4 TCVN 11839:2017 Hệ bảo vệ bề mặt bê tông. Yêu cầu kỹ thuật và

phương pháp thử

46

5 TCVN 9079:2012 Xi măng đóng rắn nhanh 10

Đóng tàu Trở về đầu trang

6 Sửa đổi 1:2013 QCVN

21:2010/BGTVT

Quy chuẩn kỹ thuật Quốc gia về quy phạm phân

cấp và đóng tàu biển vỏ thép (Sửa đổi lần

1:2013)

520

7 Sửa đổi 2:2014 QCVN

21:2010/BGTVT

Quy chuẩn kỹ thuật Quốc gia về quy phạm phân

cấp và đóng tàu biển vỏ thép ( sửa đổi 2:2014)

633

Máy phát điện Trở về đầu trang

8 QCVN 02:2017/BTC Quy chuẩn kỹ thuật Quốc gia đối với máy phát

điện dự trữ quốc gia

16

Môi trường (Nước thải) Trở về đầu trang

9 QCVN 63:2017/BTNMT Quy chuẩn kỹ thuật Quốc gia về nước thải chế

biến tinh bột sắn

11

TIÊU CHUẨN NƯỚC NGOÀI

Vi sinh vật thực phẩm Trở về đầu trang

10 DIN EN ISO 16654 Replaces:DIN

EN ISO 16654 (2001-11)*DIN EN

ISO 16654/A1 (2016-01)

Microbiology of food and animal feeding stuffs -

Horizontal method for the detection of

Escherichia coli O157 (ISO 16654:2001 + Amd

1:2017); German version EN ISO 16654:2001 +

A1:2017

32


EN ISO 10273 (2003-12)*DIN EN

ISO 10273 (2015-09)*DIN EN ISO

10273 Berichtigung 1 (2007-05)

Microbiology of the food chain - Horizontal

method for the detection of pathogenic Yersinia

enterocolitica (ISO 10273:2017); German

version EN ISO 10273:2017

53


EN ISO 22964 (2015-04)

Microbiology of the food chain - Horizontal

method for the detection of Cronobacter spp.

(ISO 22964:2017); German version EN ISO

22964:2017

34

13 BS EN ISO 10273:2017

Replaces:BS EN ISO 10273:2003

Microbiology of the food chain. Horizontal

method for the detection of pathogenic Yersinia

enterocolitica

50

14 BS EN ISO 22964:2017 Microbiology of the food chain. Horizontal 32



method for the detection of Cronobacter spp.

15 BS EN ISO 6887-1:2017

Replaces:BS EN ISO 6887-1:1999

Microbiology of the food chain. Preparation of

test samples, initial suspension and decimal

dilutions for microbiological examination.

General rules for the preparation of the initial

suspension and decimal dilutions

34

16 BS EN ISO 6887-2:2017





Specific rules for the preparation of meat and

meat products

16

17 BS EN ISO 6887-3:2017





Specific rules for the preparation of fish and

fishery products

26

18 BS EN ISO 6887-4:2017

Replaces:BS EN ISO 6887-

4:2003+A1:2011




Specific rules for the preparation of

miscellaneous products

26

Công nghệ thực phẩm (Dầu mỡ động vật và thực vật) Trở về đầu trang


EN ISO 3656 (2011-05)*DIN EN

ISO 3656/A1 (2016-10)

Animal and vegetable fats and oils -

Determination of ultraviolet absorbance

expressed as specific UV extinction (ISO

3656:2011 + Amd 1:2017); German version EN

ISO 3656:2011 + A1:2017

23

20 DIN EN ISO 12966-2

Replaces:DIN EN ISO 12966-2

(2011-05)*DIN EN ISO 12966-2

(2016-12)

Animal and vegetable fats and oils - Gas

chromatography of fatty acid methyl esters - Part

2: Preparation of methyl esters of fatty acids

(ISO 12966-2:2017); German version EN ISO

12966-2:2017

28

21 DIN EN 16924 Replaces:DIN EN

16924 (2015-11)

Foodstuffs - Determination of zearalenone in

edible vegetable oils by LC-FLD or LC-MS/MS;

German version EN 16924:2017

34


16995 (2016-05)

Foodstuffs - Vegetable oils and foodstuff on

basis of vegetable oils - Determination of

mineral oil saturated hydrocarbons (MOSH) and

mineral oil aromatic hydrocarbons (MOAH)

with on-line HPLC-GC-FID analysis; German

version EN 16995:2017

35

23 BS EN 16924:2017 Foodstuffs. Determination of zearalenone in

edible vegetable oils by LC-FLD or LC-MS/MS

32

Công nghệ thực phẩm (Phương pháp thử và phân tích chung đối với thực phẩm, Đồ

uống không cồn, Ngũ cốc) Trở về đầu trang


16923 (2015-11)

Foodstuffs - Determination of T-2 toxin and HT-

2 toxin in cereals and cereal products for infants

29



and young children by LC-MS/MS after SPE

cleanup; German version EN 16923:2017

25 BS EN 16857:2017 Foodstuffs. Determination of benzene in soft

drinks, other beverages and vegetable-based

infant foods by headspace gas chromatography

mass spectrometry (HS-GC-MS)

15

26 BS EN 16858:2017 Foodstuffs. Determination of melamine and

cyanuric acid in foodstuffs by liquid

chromatography and tandem mass spectrometry

(LC-MS/MS)

22

27 BS EN 16923:2017 Foodstuffs. Determination of T-2 toxin and HT-

2 toxin in cereals and cereal products for infants

and young children by LC-MS/MS after SPE

cleanup

28

Nông nghiệp (Máy móc, dụng cụ và thiết bị nông nghiệp) Trở về đầu trang

28 prEN ISO 10517 Powered hand-held hedge trimmers - Safety (

ISO/DIS 10517:2017)

1

29 ISO/FDIS 20383 Replaces:ISO/DIS

20383 (2015-12)

Tractors and machinery for agriculture and

forestry - Speed Identification Sign (SIS)

6

Nông nghiệp (Thức ăn chăn nuôi, Thuốc lá) Trở về đầu trang


16936 (2016-01)

Animal feeding stuffs - Methods of sampling

and analysis - Screening on the antibiotics

tylosin, virginiamycin, spiramycin, bacitracin-

zinc and avoparcin at sub-additive levels in

compound feed by a microbiological plate test;


18

31 BS EN 16936:2017 Animal feeding stuffs. Methods of sampling and

analysis. Screening on the antibiotics tylosin,

virginiamycin, spiramycin, bacitracin-zinc and

avoparcin at sub-additive levels in compound

feed by a microbiological plate test

16

32 BS ISO 13276:2017 Replaces:BS

5202-17:1997

Tobacco and tobacco products. Determination of

nicotine purity. Gravimetric method using

tungstosilicic acid

12

Công nghệ hóa chất Trở về đầu trang

33 DIN EN 17127 Gaseous hydrogen - Fueling stations - Part 1:

General requirements; German and English

version prEN 17127:2017

31

34 JIS K 1101:2017 Replaces:JIS K

1101:2006

Oxygen 9

35 ASTM C1222-17 Replaces: ASTM

C1222-13

Standard Practice for Evaluation of Laboratories

Testing Hydraulic Cement

5

36 ASTM D8142-17 Standard Test Method for Determining

Chemical Emissions from Spray Polyurethane

Foam (SPF) Insulation using Micro-Scale

Environmental Test Chambers

13



Dầu mỏ và các công nghệ liên quan Trở về đầu trang

37 BS 2869:2017 Replaces:BS

2869:2010+A1:2011

Fuel oils for agricultural, domestic and industrial

engines and boilers. Specification

28

38 BS EN 16942:2016 Fuels. Identification of vehicle compatibility.

Graphical expression for consumer information

44

39 EN ISO 21809-5 Replaces:EN ISO

21809-5 (2010-04)*prEN ISO

21809-5 (2016-04)

Petroleum and natural gas industries - External

coatings for buried or submerged pipelines used

in pipeline transportation systems - Part 5:

External concrete coatings (ISO 21809-5:2017)

3

40 FprEN ISO 4259-1 Replaces:prEN

ISO 4259-1 (2016-01)

Petroleum and related products - Precision of

measurement methods and results - Part 1:

Determination of precision data in relation to

methods of test (ISO/FDIS 4259-1:2017)

1


ISO 4259-2 (2016-01)

Petroleum and related products - Precision of

measurement methods and results - Part 2:

Interpretation and application of precision data

in relation to methods of test (ISO/FDIS 4259-

2:2017)

1


6441:1993*BS 7340:1991*BS ISO

5024:1999

Petroleum and related products. Temperature

and pressure volume correction factors

(petroleum measurement tables) and standard

reference conditions. Part : Tables based on

reference temperatures of 15 degrees C and 60

degrees F

24

43 BS ISO 13357-1:2017 Replaces:BS

ISO 13357-1:2002

Petroleum products. Determination of the

filterability of lubricating oils. Procedure for oils

in the presence of water

20

44 DIN EN ISO 20321 Petroleum, petrochemical and natural gas

industries - Safety of machineries - Powered

elevators (ISO/DIS 20321:2017); German and

English version prEN ISO 20321:2017

71

45 BS ISO 19970:2017 Refrigerated hydrocarbon and non-petroleum

based liquefied gaseous fuels. Metering of gas as

fuel on LNG carriers during cargo transfer

operations

20

46 ASTM E1497-17 Replaces: ASTM

E1497-05

Standard Practice for Selection and Safe Use of

Water-Miscible and Straight Oil Metal Removal

Fluids

7

47 ASTM D4175-17ae1 Replaces:

ASTM D4175-16

Standard Terminology Relating to Petroleum

Products, Liquid Fuels, and Lubricants

67

Công nghệ nano Trở về đầu trang

48 ISO/TR 19601 Nanotechnologies - Aerosol generation for air

exposure studies of nano-objects and their

aggregates and agglomerates (NOAA)

53

Cao su Trở về đầu trang

49 JIS K 6260:2017 Replaces:JIS K Rubber, vulcanized or thermoplastic. 26



6260:2010 Determination of flex cracking and crack growth

(De Mattia type)


ISO 4662:2009

Rubber, vulcanized or thermoplastic.

Determination of rebound resilience

40


ISO 5600:2011

Rubber. Determination of adhesion to rigid

materials using conical shaped parts

14

52 ASTM C1115 -17 Replaces: ASTM

C1115-06

Standard Specification for Dense Elastomeric

Silicone Rubber Gaskets and Accessories

5

53 ASTM C957/C957M -17 Replaces:

ASTM C957/C957M-14

Standard Specification for High-Solids Content,

Cold Liquid-Applied Elastomeric Waterproofing

Membrane With Integral Wearing Surface

4

54 ASTM D3265-17a Replaces:

ASTM D3265-17

Standard Test Method for Carbon Black - Tint

Strength

7


ISO 16392:2007

Tyres. Electrical resistance. Test method for

measuring electrical resistance of tyres on a test

rig

16

Chất dẻo Trở về đầu trang

56 DIN EN ISO 4589-1 Replaces:DIN

EN ISO 4589-1 (1999-09)*DIN EN

ISO 4589-1 (2016-03)

Plastics - Determination of burning behaviour by

oxygen index - Part 1: General requirements


4589-1:2017

13


EN ISO 4589-2 (2006-06)*DIN EN

ISO 4589-2 (2016-03)


oxygen index - Part 2: Ambient-temperature test


4589-2:2017

39


EN ISO 4589-3 (1996-10)*DIN EN

ISO 4589-3 (2016-03)


oxygen index - Part 3: Elevated-temperature test


4589-3:2017

29

59 EN ISO 22007-4 Replaces:EN ISO

22007-4 (2012-01)*FprEN ISO

22007-4 (2017-03)

Plastics - Determination of thermal conductivity

and thermal diffusivity - Part 4: Laser flash

method (ISO 22007-4:2017)

3


ISO 294-5 (2015-06)

Plastics - Injection moulding of test specimens

of thermoplastic materials - Part 5: Preparation

of standard specimens for investigating

anisotropy (ISO/FDIS 294-5:2017)

1

61 DIN EN ISO 15023-1


(2006-06)*DIN EN ISO 15023-1

(2016-03)

Plastics - Poly(vinyl alcohol) (PVAL) materials -

Part 1: Designation system and basis for

specifications (ISO 15023-1:2017); German

version EN ISO 15023-1:2017

17

62 DIN EN ISO 11298-1 Plastics piping systems for renovation of

underground water supply networks - Part 1:

General (ISO/DIS 11298-1:2017); German and

English version prEN ISO 11298-1:2017

50

63 DIN EN ISO 11298-3 Plastics piping systems for renovation of

underground water supply networks - Part 3:

51



Lining with close-fit pipes (ISO/DIS 11298-

3:2017); German and English version prEN ISO

11298-3:2017

64 BS EN ISO 4589-2:2017


Plastics. Determination of burning behaviour by

oxygen index. Ambient-temperature test

36

65 BS EN ISO 4589-3:2017


Plastics. Determination of burning behaviour by

oxygen index. Elevated-temperature test

28

Hệ thống và kết cấu chất lỏng (Van, Bơm) Trở về đầu trang

66 DIN EN ISO 17871/A1 Gas cylinders - Quick-release cylinder valves -

Specification and type testing (ISO

17871:2015/DAM 1:2017); German and English

version EN ISO 17871:2015/prA1:2017

11


3338 (1987-12)*DIN 3358 (1982-

10)*DIN EN ISO 5210 (1996-

05)*DIN EN ISO 5210 (2016-03)

Industrial valves - Multi-turn valve actuator

attachments (ISO 5210:2017); German version

EN ISO 5210:2017

23


EN ISO 5211 (2001-06)*DIN EN

ISO 5211 (2016-03)

Industrial valves - Part-turn actuator attachments


5211:2017

31

69 BS EN ISO 5211:2017 Replaces:BS

EN ISO 5211:2001

Industrial valves. Part-turn actuator attachments 32

70 DIN EN ISO 14414 rev Pump system energy assessment (ISO/DIS

14414:2017); German and English version prEN

ISO 14414:2017

129

Hệ thống và kết cấu chất lỏng (Thiết bị chứa chất lỏng, Hệ thống truyền dẫn chất lỏng

Trở về đầu trang

71 BS ISO 23208:2017 Cryogenic vessels. Cleanliness for cryogenic

service

14

72 BS EN 14359:2017 Replaces:BS

EN 14359:2006+A1:2010

Gas-loaded accumulators for fluid power

applications

96

73 BS EN 1442:2017 Replaces:BS EN

1442:2006+A1:2008

LPG equipment and accessories. Transportable

refillable welded steel cylinders for LPG. Design

and construction

52

74 BS EN ISO 11114-4:2017


Transportable gas cylinders. Compatibility of

cylinder and valve materials with gas contents.

Test methods for selecting steels resistant to

hydrogen embrittlement

26

Quạt Trở về đầu trang

75 prEN ISO 12759-2 Fans - Efficiency classification for fans - Part 2:

Standard losses for drive components (ISO/DIS

12759-2:2017)

1

76 DIN EN ISO 12759-2 Fans - Efficiency classification for fans - Part 2:

Standard losses for drive components (ISO/DIS

12759-2:2017); German and English version

prEN ISO 12759-2:2017

48



Năng lượng và truyền nhiệt (Năng lượng và truyền nhiệt nói chung, Năng lượng mặt

trời, Năng lượng gió) Trở về đầu trang

77 IEC 82/1309/CD*CEI

82/1309/CD*IEC 62790 AMD

1*CEI 62790 AMD 1

Amendment 1 - Junction boxes for photovoltaic

modules - Safety requirements and tests

78 DIN EN 62108*VDE 0126-33

Replaces:DIN EN 62108 (2008-

07)*DIN EN 62108 (2015-08)

Concentrator photovoltaic (CPV) modules and

assemblies - Design qualification and type

approval (IEC 62108:2016); German version EN

62108:2016

57

79 DIN EN 62933-1*VDE 0520-933-1 Electrical Energy Storage (EES) systems - Part

1: Terminology (IEC 120/96/CDV:2017);

German version prEN 62933-1:2017

64

80 DIN EN 62933-3-1*VDE 0520-

933-3-1

Electrical Energy Storage (EES) Systems - Part

3-1: Planning and Installation - General

specifications (IEC 120/94/CD:2016)

68

81 BS EN 62788-1-6:2017 Measurement procedures for materials used in

photovoltaic modules. Encapsulants. Test

methods for determining the degree of cure in

Ethylene-Vinyl Acetate

30

82 DIN EN 62788-1-4*VDE 0126-37-

1-4 Replaces:DIN EN 62788-1-4

(2014-12)

Measurement procedures for materials used in

photovoltaic modules - Part 1-4: Encapsulants -

Measurement of optical transmittance and

calculation of the solar-weighted photon

transmittance, yellowness index, and UV cut-off

wavelength (IEC 62788-1-4:2016); German

version EN 62788-1-4:2016

22

83 BS EN 62670-3:2017 Photovoltaic concentrators (CPV). Performance

testing. Performance measurements and power

rating

46

84 IEC 82/1303/CD*CEI

82/1303/CD*IEC 60904-11*CEI

60904-11

Photovoltaic devices - Part 11: Measurement of

light-induced degradation of crystalline silicon

solar cells

85 DIN EN 61215-2*VDE 0126-31-2 Terrestrial photovoltaic (PV) modules - Design

qualification and type approval - Part 2: Test

procedures (IEC 61215-2:2016); German

version EN 61215-2:2017

51

86 DIN EN 61400-25-5*VDE 0127-

25-5

Wind energy generation systems - Part 25-5:

Communications for monitoring and control of

wind power plants - Conformance testing (IEC

88/589/CDV:2016); English version prEN

61400-25-5:2016

61

Năng lượng và truyền nhiệt (Pin nhiên liệu, Nhiên liệu sinh học rắn) Trở về đầu trang

87 DIN EN 62282-6-400*VDE 0130-

6-400 Replaces:DIN EN 62282-6-

400 (2013-01)

Fuel cell technologies - Part 6-400: Micro fuel

cell power systems - Power and data

interchangeability (IEC 105/641/CD:2017)

31

88 BS EN ISO 18135:2017 Solid Biofuels. Sampling 64



Replaces:BS EN 14778:2011


EN 14918 (2014-08)*DIN EN ISO

18125 (2015-12)

Solid biofuels - Determination of calorific value


18125:2017

67


EN ISO 19743 (2016-04)

Solid biofuels - Determination of content of

heavy extraneous materials larger than 3,15 mm


19743:2017

12


EN 14780 (2011-09)*DIN EN ISO

14780 (2016-01)

Solid biofuels - Sample preparation (ISO

14780:2017); German version EN ISO

14780:2017

35


EN 14778 (2011-09)*DIN EN ISO

18135 (2016-01)

Solid Biofuels - Sampling (ISO 18135:2017);

German version EN ISO 18135:2017

73

Khai thác mỏ và khoáng sản (Khoáng sản kim loại ) Trở về đầu trang


ISO 11790:2010

Copper, lead, zinc and nickel concentrates.

Guidelines for the inspection of mechanical

sampling systems

26


ISO 11794:2010

Copper, lead, zinc and nickel concentrates.

Sampling of slurries

50

Phương tiên giao thông đường bộ - Vận tải Trở về đầu trang

95 DIN EN 61851-23-1*VDE 0122-2-

31

Electric vehicle conductive charging system -

Part 23-1: DC Charging with an automatic

connection system (IEC 69/495/CD:2017)

86

96 DIN CEN ISO/TS 17429*DIN

SPEC 71999

Intelligent transport systems - Cooperative ITS -

ITS station facilities for the transfer of

information between ITS stations (ISO/TS

17429:2017); English version CEN ISO/TS

17429:2017

56


EN ISO 14823 (2016-09)*DIN

CEN ISO/TS 14823 (2011-08)

Intelligent transport systems - Graphic data

dictionary (ISO 14823:2017); English version

EN ISO 14823:2017

51

98 DIN ISO 12219-6 Replaces:DIN

ISO 12219-6 (2015-04)

Interior air of road vehicles - Part 6: Method for

the determination of the emissions of semi-

volatile organic compounds from vehicle interior

parts and materials at higher temperature - Small

chamber method (ISO 12219-6:2017)

30

99 DIN ISO 12219-7 Replaces:DIN

ISO 12219-7 (2016-02)

Interior air of road vehicles - Part 7: Odour

determination in interior air of road vehicles and

test chamber air of trim components by olfactory

measurements (ISO 12219-7:2017)

31


5341-7.3.1:1992

Internal combustion engines. Piston rings.

Keystone rings made of cast iron

34

101 DIN EN 17128 Non-type approved light motorized vehicles for

the transportation of persons and goods and

175



related facilities - Personal light electric vehicles

(PLEV) - Safety requirements and test methods;

German and English version prEN 17128:2017

102 JIS D 1614:2017 Replaces:JIS D

1614:2000

Radiators for automobiles -- Test method of heat

dissipation

10

Đường sắt Trở về đầu trang

103 DIN EN 62625-1/A11*VDE 0115-

625-1/A11

Electronic railway equipment - On board driving

data recording system - Part 1: System

specification; German version EN 62625-

1:2013/A11:2017

5

104 DIN EN 61375-2-3/A11 Electronic railway equipment - Train

communication network (TCN) - Part 2-3: TCN

communication profile; German version EN

61375-2-3:2015/A11:2017

6

105 DIN EN 61375-3-4/A11 Electronic railway equipment - Train

communication network (TCN) - Part 3-4:

Ethernet Consist Network (ECN); German

version EN 61375-3-4:2014/A11:2017

5

106 BS EN 16586-1:2017 Railway applications. Design for PRM use.

Accessibility of persons with reduced mobility to

rolling stock. Steps for access and egress

24

107 BS EN 16586-2:2017 Railway applications. Design for PRM use.

Accessibility of persons with reduced mobility to

rolling stock. Boarding aids

34

108 BS EN 14033-1:2017 Replaces:BS

EN 14033-1:2011

Railway applications. Track. Railbound

construction and maintenance machines.

Technical requirements for running

118


EN 14033-3:2009+A1:2011

Railway applications. Track. Railbound

construction and maintenance machines. General

safety requirements

68


EN 13803-1:2010*BS EN 13803-

2:2006+A1:2009

Railway applications. Track. Track alignment

design parameters. Track gauges 1 435 mm and

wider. Part 1: Plain line

100


EN 13796-1:2005

Safety requirements for cableway installations

designed to carry persons. Carriers. Grips,

carrier trucks, on-board brakes, cabins, chairs,

carriages, maintenance carriers, tow-hangers

76

Đóng tàu và Kết cấu tàu thủy Trở về đầu trang

112 EN ISO 9097 Replaces:EN ISO

9097 (1994-11)*FprEN ISO 9097

(2017-03)*EN ISO 9097/A1 (2000-

09)

Small craft - Electric fans (ISO 9097:1991) 4


10133 (2012-12)*FprEN ISO 10133

(2017-03)

Small craft - Electrical systems - Extra-low-

voltage d.c. installations (ISO 10133:2012)

4




8665 (2006-06)*FprEN ISO 8665

(2017-03)

Small craft - Marine propulsion reciprocating

internal combustion engines - Power

measurements and declarations (ISO 8665:2006)

4


10088 (2013-08)*FprEN ISO 10088

(2017-03)

Small craft - Permanently installed fuel systems

(ISO 10088:2013)

5


8847 (2004-05)*FprEN ISO 8847

(2017-03)*EN ISO 8847/AC (2005-

10)

Small craft - Steering gear - Cable and pulley

systems (ISO 8847:2004)

4

Kỹ thuật máy bay và tàu vũ trụ Trở về đầu trang

117 LN 9348 Aerospace - Hexagon nuts, self-locking, with

reduced width across flats, for temperatures from

-55 to +120 °C

7

118 LN 29949 Aerospace series - cheese screws with internal

serration, corrosion resistant, for temperatures up

to 650 °C

9

119 LN 1798 Replaces:LN 1798 (2001-

12)*LN 1798 (2017-03)

Aerospace series - Round bars of wrought

aluminium alloys, drawn - Dimensions, masses;

Text in German and English

16

120 LN 1799 Replaces:LN 1799 (2001-

12)*LN 1799 (2017-03)

Aerospace series - Round bars of wrought

aluminium alloys, extruded - Dimensions,

masses; Text in German and English

20

121 EN 2034 Replaces:FprEN 2034

(2017-02)

Aerospace series - Round steel bars drawn

and/or descaled - Dimensions - Tolerance h 11

6


(2017-02)

Aerospace series - Round steel bars ground -

Dimensions - Tolerance h 8

7

123 EN 2004-7 Aerospace series - Test methods for aluminium

and aluminium alloy products - Part 7:

Reference blocks for the calibration of

measuring equipment used in the determination

of electrical conductivity of wrought aluminium

and aluminium alloys

9


2286:1990

Aerospace series. Bushes, flanged aluminium

alloy, with self-lubricating liner. Dimensions and

loads

12


2285:1990

Aerospace series. Bushes, plain, aluminium

alloy, with self-lubricating liner. Dimensions and

loads

12

126 BS EN 4814:2017 Aerospace series. Flange couplings up to 21000

kPa. Technical specification. Inch series

16

127 BS EN 4813:2017 Aerospace series. Flange couplings. Cap, in heat

resisting steel. Inch series

8

128 BS EN 4811:2017 Aerospace series. Flange couplings. Gasket seal

with fluorocarbon seal on aluminium plate with

8



4 fastening holes. Inch series


with nickel alloy C seal on heat resisting steel

plate with 4 fastening holes. Inch series

8


with nickel alloy C seal. Technical specification.

Inch series

18

131 BS EN 4801:2017 Aerospace series. Flange couplings. Swivel

flange with 3 fastening holes, in heat resisting

steel. Inch series

6

132 BS EN 4803:2017 Aerospace series. Flange couplings. Swivel

flange with 4 fastening holes, in heat resisting

steel. Inch series

6

133 BS EN 4807:2017 Aerospace series. Flange couplings. Weld

coupling, 900 elbow, in heat resisting steel. Inch

series

10

134 BS EN 4808:2017 Aerospace series. Flange couplings. Weld

coupling, 900 elbow, in nickel alloy. Inch series

10

135 BS ISO 19923:2017 Space environment (natural and artificial).

Plasma environments for generation of worst

case electrical potential differences for

spacecraft

20

Cơ khí chính xác. Kim hoàn Trở về đầu trang

136 DIN EN ISO 8654 Jewellery - Colours of gold alloys - Definition,

range of colours and designation (ISO/DIS


ISO 8654:2017

32

Chế tạo (Hệ thống tự động hóa công nghiệp) Trở về đầu trang


EN 62264-3:2007

Enterprise-control system integration. Activity

models of manufacturing operations

management

88

138 VDI/VDE 3516 Blatt 5 Validation in the GxP area - Types of raw data 24

Chế tạo (Hàn đồng và hàn thiếc) Trở về đầu trang


(2016-08)

Aerospace series - Metallic materials, Filler

metal for brazing - Technical specification

22


(2017-02)

Aerospace series - Rectangular steel bars rolled -

Dimensions - Tolerance js 16

10

141 JIS Z 3352:2017 Replaces:JIS Z

3352:2010

Fluxes for submerged arc welding and

electroslag welding

18

142 FprEN ISO 14114 Replaces:prEN

ISO 14114 (2016-08)

Gas welding equipment - Acetylene manifold

systems for welding, cutting and allied processes

- General requirements (ISO/FDIS 14114:2017)

1




EN ISO 3580 (2011-05)*DIN EN

ISO 3580 (2016-02)

Welding consumables - Covered electrodes for

manual metal arc welding of creep-resisting

steels - Classification (ISO 3580:2017); German


35


EN ISO 14343 (2010-04)*DIN EN

ISO 14343 (2015-08)

Welding consumables - Wire electrodes, strip

electrodes, wires and rods for arc welding of

stainless and heat resisting steels - Classification


14343:2017

28

145 BS EN ISO 18276:2017


Welding consumables. Tubular cored electrodes

for gas-shielded and non-gas-shielded metal arc

welding of high strength steels. Classification

32

146 BS EN ISO 14343:2017


Welding consumables. Wire electrodes, strip

electrodes, wires and rods for arc welding of

stainless and heat resisting steels. Classification

28

147 BS ISO 19828:2017 Welding for aerospace applications. Visual

inspection of welds

20

Chế tạo (Máy công cụ- Lò điện) Trở về đầu trang

148 BS EN ISO 16093:2017

Replaces:BS EN

13898:2003+A1:2009

Machine tools. Safety. Sawing machines for cold

metal

66


ISO 26622-1:2008

Modular taper interface with ball track system.

Dimensions and designation of shanks

20

150 JIS B 6360 Replaces:JIS B 6360

(2006-07-20)

Test conditions for wire electrical-discharge

machines (wire EDM) - Testing of the accuracy

26

151 JIS R 7222:2017 Replaces:JIS R

7222:1997

Test methods for physical properties of graphite

materials

40

Chế tạo (Thiết bị làm việc không phoi) Trở về đầu trang

152 VDI 3363 Replaces:VDI 3363

(1993-08)*VDI 3363 (2016-01)

Shoulder screws, shoulder bushes in stamping

and forming dies

28

153 JIS B 6361-1 Replaces:JIS B 6361-1

(1999-12-20)

Test conditions for die sinking electro-discharge

machines (die sinking EDM) - Testing of the

accuracy - Part 1: Single-column machines

26

154 JIS B 6361-2 Replaces:JIS B 6361-2

(1999-12-20)

Test conditions for die sinking electro-discharge

machines (die sinking EDM) - Testing of the

accuracy - Part 2: Double-column machines

(slide-head type)

26

Chế tạo (Dụng cụ cầm tay) Trở về đầu trang


ISO 2725-1:2015

Assembly tools for screws and nuts. Square

drive sockets. Hand-operated sockets

16


ISO 2725-2:2015


drive sockets. Machine-operated sockets

("impact")

18




ISO 2725-3:2015


drive sockets. Machine-operated sockets ("non-

impact")

14


EN 55014-1:2006+A2:2011

Electromagnetic compatibility. Requirements for

household appliances, electric tools and similar

apparatus. Emission

90

Chế tạo (Xử lý bề mặt và mạ) Trở về đầu trang


2135 (2016-11)

Anodizing of aluminium and its alloys -

Accelerated test of light fastness of coloured

anodic oxidation coatings using artificial light

6


2143 (2016-11)


Estimation of loss of absorptive power of anodic

oxidation coatings after sealing - Dye-spot test

with prior acid treatment

6


10216 (2016-11)


Instrumental determination of image clarity of

anodic oxidation coatings - Instrumental method

9

162 DIN EN ISO 7668 Anodizing of aluminium and its alloys -

Measurement of specular reflectance and

specular gloss of anodic oxidation coatings at

angles of 20 degrees, 45 degrees, 60 degrees or

85 degrees (ISO/DIS 7668:2017); German and


43

163 DIN EN ISO 10215 Anodizing of aluminium and its alloys - Visual

determination of image clarity of anodic

oxidation coatings - Chart scale method

(ISO/DIS 10215:2017); German and English

version prEN ISO 10215:2017

28


EN 582 (1994-01)*DIN EN ISO

14916 (2015-09)

Thermal spraying - Determination of tensile

adhesive strength (ISO 14916:2017); German


36

165 DIN EN ISO 14232-1


02)*DIN EN ISO 14232-1 (2016-

02)

Thermal spraying - Powders - Part 1:

Characterization and technical supply conditions


14232-1:2017

19


EN 657 (2005-06)*DIN EN ISO

14917 (2015-09)

Thermal spraying - Terminology, classification


14917:2017

36

167 DIN EN ISO 19496-1


04)*DIN EN ISO 19496-1 (2016-

02)

Vitreous and porcelain enamels - Terminology -

Part 1: Terms and definitions (ISO 19496-

1:2017); German version EN ISO 19496-1:2017

36

168 DIN EN ISO 19496-2

Replaces:DIN 51176-2 (2008-

06)*DIN EN ISO 19496-2 (2016-

02)

Vitreous and porcelain enamels - Terminology -

Part 2: Visual representations and descriptions


19496-2:2017

24



169 DIN EN ISO 14713-1


(2010-05)*DIN EN ISO 14713-1

(2016-12)

Zinc coatings - Guidelines and recommendations

for the protection against corrosion of iron and

steel in structures - Part 1: General principles of

design and corrosion resistance (ISO 14713-

1:2017); German version EN ISO 14713-1:2017

28

170 DIN EN ISO 14713-3


(2010-05)*DIN EN ISO 14713-3

(2017-02)

Zinc coatings - Guidelines and recommendations


steel in structures - Part 3: Sherardizing (ISO

14713-3:2017); German version EN ISO 14713-

3:2017

16

171 BS EN ISO 14713-3:2017


Zinc coatings. Guidelines and recommendations


steel in structures. Sherardizing

16

Hệ thống và kết cấu cơ khí (Ổ đỡ, Trục và khớp nối, Chi tiết lắp xiết) Trở về đầu trang


ISO 1925:2001

Mechanical vibration. Rotor balancing.

Vocabulary

30

173 ISO 4378-1 Replaces:ISO 4378-1

(2009-09)*ISO/FDIS 4378-1 (2017-

03)

Plain bearings - Terms, definitions, classification

and symbols - Part 1: Design, bearing materials

and their properties

39


(2009-09)*ISO/FDIS 4378-2 (2017-

03)


and symbols - Part 2: Friction and wear

10


(2009-09)*ISO/FDIS 4378-3 (2017-

03)


and symbols - Part 3: Lubrication

20


EN 12308:1998

Plain bearings. Quality assurance of sample

types. Definitions, applications and testing

10

177 ASTM F366-17 Replaces: ASTM

F366-10

Standard Specification for Fixation Pins and

Wires

4

Thiết bị xếp dỡ vật liệu (Cần trục, Xe nâng, Phụ kiện băng tải ) Trở về đầu trang

178 BS 7121-3:2017 Replaces:BS 7121-

3:2000

Code of practice for safe use of cranes. Mobile

cranes

74


(2014-04)

Energy and data transmission systems for cranes 40


(2008-02)*VDI 2518 (2016-12)

Recommendations for the supply of handling

equipment for loading/unloading containers,

railroad cars and exchange containers by fork-

lift-trucks

8

181 DIN EN ISO 15236-3


(2008-04)*DIN EN ISO 15236-3

(2016-10)

Steel cord conveyor belts - Part 3: Special safety

requirements for belts for use in underground

installations (ISO 15236-3:2017); German


24

182 BS EN ISO 15236-3:2017


Steel cord conveyor belts. Special safety

requirements for belts for use in underground

installations

20



Luyện kim (Kim loại màu) Trở về đầu trang

183 ASTM B37-17 Replaces: ASTM

B37-08

Standard Specification for Aluminum for Use in

Iron and Steel Manufacture

4

Luyện kim (Kim loại đen - Sản phẩm sắt thép) Trở về đầu trang

184 JIS G 3313:2017/AMD1 Electrolytic zinc-coated steel sheet and strip

(Amendment 1)

1

185 JIS G 3302:2017/AMD2 Hop-dip zinc-coated steel sheet and strip

(Amendment 2)

1

186 JIS G 3321:2017/AMD2 Hot-dip 55 percent aluminium-zinc alloy-coated

steel sheet and strip (Amendment 2)

1

187 JIS G 3314:2017/AMD1 Hot-dip aluminium-coated steel sheets and strip

(Amendment 2)

1

188 JIS G 3317:2017/AMD2 Hot-dip zinc - 5 percent aluminium alloy-coated

steel sheet and strip (Amendment 2)

1

189 JIS G 3323:2017/AMD1 Hot-dip zinc-aluminium-magnesium alloy-

coated steel sheet and strip (Amendment 1)

1

190 JIS G 1215-4:2017/AMD2 Iron and steel. Determination of sulfur content.

Part 4: InFrared absorption method after

combustion in an induction furnace

(Amendment 2)

3

191 JIS G 3350 Replaces:JIS G 3350

(2009-11-20)

Light gauge steel sections for general structure 24

192 JIS G 0321:2017 Replaces:JIS G

0321:2015

Product analysis and its tolerance for wrought

steel

11

Luyện kim (Thử nghiệm kim loại – Ăn mòn kim loại) Trở về đầu trang


EN ISO 9227:2012

Corrosion tests in artificial atmospheres. Salt

spray tests

32

194 JIS G 1211-3:2017/AMD2 Iron and steel. Determination of carbon content.

Part 3: Infrared absorption method after

combustion (Amendment 2)

2

195 JIS G 1211-4:2017/AMD2 Iron and steel. Determination of carbon content.

Part 4: Infrared absorption method after

combustion in a furnace with preheating or peak

separating (Amendment 2)

1

196 ISO 24213 Replaces:ISO 24213

(2008-03)*ISO/FDIS 24213 (2017-

03)

Metallic materials - Sheet and strip - Method for

springback evaluation in stretch bending

11


ISO 24213:2008

Metallic materials. Sheet and strip. Method for

springback evaluation in stretch bending

20

Điện tử Trở về đầu trang

198 IEC 60603-7-81 Corrigendum

1*CEI 60603-7-81 Corrigendum 1

Connectors for electronic equipment - Part 7-81:

Detail specification for 8-way, shielded, free and

fixed connectors, for data transmissions with

frequencies up to 2000 MHz - Corrigendum 1

2



199 IEC 110/879/CD*CEI

110/879/CD*IEC 62679-2*CEI

62679-2

Electronic paper display - Part 2: Essential

ratings and characteristics

200 DIN EN 60384-16 Fixed capacitors for use in electronic equipment

- Part 16: Sectional specification: Fixed

metallized polypropylene film dielectric d.c.

capacitors (IEC 40/2530/CD:2017)

67

201 IEC 40/2542/CD*CEI

40/2542/CD*IEC 60384-21*CEI

60384-21

Fixed capacitors for use in electronic equipment

- Part 21: Sectional specification - Fixed surface

mount multilayer capacitors of ceramic

dielectric, Class 1

202 IEC 40/2543/CD*CEI

40/2543/CD*IEC 60384-22*CEI

60384-22

Fixed capacitors for use in electronic equipment

- Part 22: Sectional specification - Fixed surface

mount multilayer capacitors of ceramic

dielectric, Class 2

203 IEC 47A/1022/CD*CEI

47A/1022/CD*IEC 61967-1*CEI

61967-1

Integrated circuits - Measurement of

electromagnetic emissions - Part 1: General

conditions and definitions

204 IEC 61967-4 Corrigendum 1*CEI

61967-4 Corrigendum 1

Integrated circuits - Measurement of

electromagnetic emissions, 150 kHz to 1 GHz -

Part 4: Measurement of conducted emissions; 1

Ώ/150 Ώ direct coupling method - Corrigendum

1

2

205 IEC 47A/1021/CD*CEI

47A/1021/CD*IEC 63011-2*CEI

63011-2

Integrated circuits - Three dimensional

integrated circuits - Part 2: Alignment of stacked

dies having fine pitch interconnect

206 ISO/TR 20811 Optics and photonics - Lasers and laser-related

equipment - Laser-induced molecular

contamination testing

10

207 DIN EN ISO 13694 Optics and photonics - Lasers and laser-related

equipment - Test methods for laser beam power

(energy) density distribution (ISO/DIS


ISO 13694:2017

46

208 DIN EN ISO 11145 Optics and photonics - Lasers and laser-related

equipment - Vocabulary and symbols (ISO/DIS


ISO 11145:2017

55

209 ISO 10936-1 Replaces:ISO 10936-1

(2000-06)*ISO/DIS 10936-1 (2016-

08)

Optics and photonics - Operation microscopes -

Part 1: Requirements and test methods

4

210 ISO 14490-5 Replaces:ISO 14490-5

(2005-10)*ISO/DIS 14490-5 (2016-

09)*ISO 14490-5 AMD 1 (2015-02)

Optics and photonics - Test methods for

telescopic systems - Part 5: Test methods for

transmittance

14


61240 (2013-05)*DIN EN 61240

Piezoelectric devices - Preparation of outline

drawings of surface-mounted devices (SMD) for

20



(2015-08) frequency control and selection - General rules

(IEC 61240:2016); German version EN

61240:2017)

212 DIN EN 60749-12 Semiconductor devices - Mechanical and

climatic test methods - Part 12: Vibration,

variable frequency (IEC 47/2386/CDV:2017);


12

213 DIN EN 60747-16-6 Semiconductor devices - Part 16-6: Microwave

integrated circuits - Frequency multipliers (IEC

47E/568/CD:2017)

52

214 IEC 47/2405/DTR*CEI

47/2405/DTR*IEC/TR

63133*CEI/TR 63133

Semiconductor devices - Scan based ageing

level estimation for semiconductor devices


62276 (2013-08)*DIN EN 62276

(2015-04)

Single crystal wafers for surface acoustic wave

(SAW) device applications - Specifications and

measuring methods (IEC 62276:2016); German


45

Kỹ thuật điện Trở về đầu trang

216 DIN EN 50642*VDE 0604-2-100

Replaces:DIN VDE 0604-2-100

(2014-07)

Cable management systems - Test method for

content of halogens; German version prEN

50642:2017

14

217 DIN EN 61466-1 Berichtigung

1*VDE 0674-103-1 Berichtigung 1

Composite string insulator units for overhead

lines with a nominal voltage greater than 1 000

V - Part 1: Standard strength classes and end

fittings (IEC 61466-1:2016); German version

EN 61466-1:2016, Corrigendum to DIN EN

61466-1 (VDE 0674-103-1):2017-01

2

218 DIN EN 50626-2*VDE 0605-626-2 Conduit systems buried underground for the

protection and management of insulated

electrical cables or communication cables - Part

2: Particular requirements for conduits for

special applications; German version prEN

50626-2:2017

21

219 VG 96950-12 Replaces:VG 96950-

12 (2011-11)

Electric power distribution equipment - Part 12:

Shells for assemblies for construction sites

(ACS), detail standard; Text in German and

English

21

220 VDI Replaces:VG 96950-2 (2010-

09)

Electric power distribution equipment - Part 2:

Generic standard; Text in German and English

20

221 BS EN 61857-31:2017 Electrical insulation systems. Procedures for

thermal evaluation. Applications with a designed

life of 5 000 h or less

16

222 IEC 34D/1288/CD*CEI

34D/1288/CD*IEC 60570 AMD

2*CEI 60570 AMD 2

Electrical supply track systems for luminaires

223 IEC 61810-1 Corrigendum 1*CEI Electromechanical elementary relays - Part 1: 2



61810-1 Corrigendum 1 General and safety requirements - Corrigendum 1

224 IEC 34/395/DTR*CEI

34/395/DTR*IEC/TR

63139*CEI/TR 63139

Explanation of the mathematical addition of

working voltages, insulation between circuits,

and use of PELV, in TC 34 standards

225 ISO/IEC DIS 80079-34 Explosive atmospheres - Part 34: Application of

quality systems for ex product manufacture

54

226 prEN ISO/IEC 80079-34 Explosive atmospheres - Part 34: Application of

quality systems for equipment manufacture

(ISO/IEC/DIS 80079-34:2017)

1

227 DIN EN 63093-4 Ferrite cores - Guidelines on dimensions and the

limits of surface irregularities - Part 4: RM-cores

(IEC 51/1183/CD:2017)

57

228 DIN EN 63093-8 Ferrite cores - Guidelines on dimensions and the

limits of surface irregularities - Part 8: E-cores

(IEC 51/1182/CD:2017)

45

229 DIN VDE 0212-434*VDE 0212-

434

Fittings for overhead lines - Part 434:

Turnbuckles

9

230 IEC 62271-100 Edition 2.2*CEI

62271-100 Edition 2.2

High-voltage switchgear and controlgear - Part

100: Alternating-current circuit-breakers

1516

231 IEC/TR 62271-305 Corrigendum

1*CEI/TR 62271-305 Corrigendum

1


305: Capacitive current switching capability of

air-insulated disconnectors for rated voltages

above 52 kV - Corrigendum 1

1

232 IEC/IEEE 62271-37-013

Corrigendum 1*CEI/IEEE 62271-



37-013: Alternating-current generator circuit-

breakers - Corrigendum 1

1


EN 62211:2004

Inductive components. Reliability management 20

234 IEC 1/2329A/CDV*CEI

1/2329A/CDV*IEC 60050-

426*CEI 60050-426

International Electrotechnical Vocabulary - Part

426: Equipment for explosive atmospheres

235 DIN EN 60947-5-5*VDE 0660-210

Replaces:DIN EN 60947-5-5 (2015-

12)*DIN EN 60947-5-5/A2 (2015-

04)

Low-voltage switchgear and controlgear - Part

5-5: Control circuit devices and switching

elements - Electrical emergency stop device

with mechanical latching function (IEC 60947-

5-5:1997 + A1:2005 + A2:2016); German

version EN 60947-5-5:1997 + A1:2005 +

A11:2013 + A2:2017

31

236 DIN EN 60404-1 Replaces:DIN EN

60404-1 (2015-01)*DIN IEC

60404-1 (2008-06)

Magnetic materials - Part 1: Classification (IEC

60404-1:2016); German version EN 60404-

1:2017

50


61703 (2002-09)*DIN EN 61703

(2013-11)

Mathematical expressions for reliability,

availability, maintainability and maintenance

support terms (IEC 61703:2016); German


102

238 DIN EN 60127-5*VDE 0820-5 Miniature fuses - Part 5: Guidelines for quality 17



Replaces:DIN EN 60127-5 (2014-

12)*DIN VDE 0820-5 (1992-11)

assessment of miniature fuse-links (IEC 60127-

5:2016); German version EN 60127-5:2017


62922 (2015-05)

Organic light emitting diode (OLED) panels for

general lighting - Performance Requirements

(IEC 62922:2016); German version EN

62922:2017

27

240 DIN EN 61008-1/A12*VDE 0664-

10/A12

Residual current operated circuit-breakers

without integral overcurrent protection for

household and similar uses (RCCBs) - Part 1:

General rules; German version EN 61008-

1:2012/A12:2017

5

241 DIN EN 60034-3*VDE 0530-3


09)

Rotating electrical machines - Part 3: Specific

requirements for synchronous generators driven

by steam turbines or combustion gas turbines

and for synchronous compensators (IEC

2/1862/CD:2017)

60

242 ASTM C1785-17 Replaces: ASTM

C1785-16

Standard Test Method for Concentration of

Pinhole Detections in Moisture Barriers on

Metal Jacketing

6

243 IEC 14/913/CD*CEI

14/913/CD*IEC 60214-2*CEI

60214-2

Tap-changers - Part 2: Application Guide

244 DIN EN 60754-3*VDE 0482-754-3 Test on gases evolved during combustion of

materials from cables - Part 3: Measurement of

low level of halogen content by ion

chromatography

40

245 IEC 60700-2 Corrigendum 1*CEI


Thyristor valves for high voltage direct current

(HVDC) power transmission - Part 2:

Terminology; Corrigendum 1

2

Công nghệ ảnh Trở về đầu trang

246 ISO/IEC DIS 12034-1 Information technology - Archive eXchange

Format (AXF) - Part 1: Structure and semantics

91


ISO 8255-1:2011

Microscopes. Cover glasses. Dimensional

tolerances, thickness and optical properties

16


ISO 15739:2013

Photography. Electronic still-picture imaging.

Noise measurements

40

Công nghệ thông tin và ứng dụng Trở về đầu trang

249 DIN EN 61970-552 Replaces:DIN

EN 61970-552 (2014-09)*DIN EN

61970-552 (2016-01)

Energy management system application program

interface (EMS-API) - Part 552: CIMXML

Model exchange format (IEC 61970-552:2016);

English version EN 61970-552:2016

43

250 ISO/IEC/IEEE DIS 42020 Enterprise, systems and software - Architecture

processes

121

251 IEC/TR 62453-52-32*CEI/TR

62453-52-32

Field device tool (FDT) interface specification -

Part 52-32: Communication implementation for

common language infrastructure - IEC 61784 CP

63



3/4, CP 3/5 and CP 3/6

252 DIN SPEC 90158 Replaces:DIN-

Fachbericht 158 (2009-09)

Guideline for a strategic and operational process

management in public administration

107

253 prEN ISO 11073-10427 Health informatics - Personal health device

communication - Part 10427: Device

specialization - Power status monitor of personal

health devices (ISO/IEEE/FDIS 11073-

10427:2017)

1

254 ISO/IEC DIS 14443-1 Identification cards - Contactless integrated

circuit cards - Proximity cards - Part 1: Physical

characteristics

11


circuit cards - Proximity cards - Part 2: Radio

frequency power and signal interface

46


circuit cards - Proximity cards - Part 3:

Initialization and anticollision

63


circuit(s) cards - Proximity cards - Part 4:

Transmission protocol

56

258 DIN EN 81346-2 Industrial systems, installations and equipment

and industrial products - Structuring principles

and reference designations - Part 2:

Classification of objects and codes for classes

(IEC 3/1305/CDV:2017); German version prEN

81346-2:2017

194


ISO 15836:2009

Information and documentation. The Dublin

Core metadata element set. Core elements

16

260 ISO/IEC FDIS 23008-12 Information technology - MPEG systems

technologies - Part 12: Image File Format

72

261 DIN ISO/IEC 27018 Replaces:DIN

ISO/IEC 27018 (2016-12)

Information technology - Security techniques -

Code of practice for protection of personally

identifiable information (PII) in public clouds

acting as PII processors (ISO/IEC 27018:2014)

37

262 ISO/IEC TS 25011 Information technology - Systems and software

quality requirements and evaluation (SQuaRE) -

Service quality models

21

263 BS ISO/IEC 24759:2017

Replaces:BS ISO/IEC 24759:2014

Information technology. Security techniques.

Test requirements for cryptographic modules

144

264 BS ISO/IEC 20000-6:2017 Information technology. Service management.

Requirements for bodies providing audit and

certification of service management systems

22

265 IEC 100/2921/CDV*CEI

100/2921/CDV*IEC 62448*CEI

62448

Multimedia systems and equipment -

Multimedia e-publishing and e-books - Generic

format for e-publishing

266 ISO/IEC DIS 14882 Programming languages - C++ 1617



267 BS ISO/IEC 30182:2017 Smart city concept model. Guidance for

establishing a model for data interoperability

68

268 DIN ISO 18587 Translation services - Post-editing of machine

translation output - Requirements (ISO

18587:2017); Text in German and English

41

Ký hiệu đồ họa (Ký hiệu thông tin công cộng) Trở về đầu trang

269 JIS Z 8210 Replaces:JIS Z 8210

(2002-03-20)*JIS Z

8210/AMENDMENT 1 (2007-01-

20)*JIS Z 8210/AMENDMENT 2

(2009-03-20)*JIS Z

8210/AMENDMENT 3 (2010-03-


(2014-07-22)*JIS Z

8210/AMENDMENT 5 (2015-05-


(2016-03-22)

Public information symbols 102

270 DIN EN ISO 7010/A7

Replaces:DIN EN ISO 7010/A7

(2017-03)

Graphical symbols - Safety colours and safety

signs - Registered safety signs - Amendment 7

(ISO 7010:2011/Amd 7:2016); German version

EN ISO 7010:2012/A7:2017

11

Viễn thông. Kỹ thuật âm thanh và hình ảnh Trở về đầu trang

271 IEC 100/2916/CDV*CEI

100/2916/CDV*IEC 62087-7*CEI

62087-7 Replaces:IEC

100/2571/CD (2015-09)

Audio, video and related equipment - Methods

of measurement for power consumption - Part 7:

Computer Monitors.

272 DIN EN 50117-1*VDE 0887-1 Coaxial cables - Part 1: Generic specification;


35

273 DIN EN 50289-1-11*VDE 0819-

289-1-11

Communication cables - Specifications for test

methods - Part 1-11: Electrical test methods -

Characteristic impedance, input impedance,

return loss; German version EN 50289-1-

11:2016

38

274 BS EN 62766-2-1:2017 Consumer terminal function for access to IPTV

and open internet multimedia services. Media

formats

38

275 IEC 100/2915/CDV*CEI

100/2915/CDV*IEC 62216*CEI

62216 Replaces:IEC 100/2149/CD

(2013-04)

Digital terrestrial television receivers for the

DVB-T system (TA 1)

276 IEC 61000-2-2 Edition 2.1*CEI

61000-2-2 Edition 2.1

Electromagnetic compatibility (EMC) - Part 2-2:

Environment - Compatibility levels for low-

frequency conducted disturbances and signalling

in public low-voltage power supply systems

149

277 IEC 57/1881/CDV*CEI

57/1881/CDV*IEC 61970-456*CEI

Energy management system application program

interface (EMS-API) - Part 456: Solved power



61970-456 system state profiles

278 IEC 86C/1467/CD*CEI

86C/1467/CD*IEC 62149-10*CEI

62149-10

Fibre optic active components and devices -

Performance standards - Part 10: RoF (radio

over fiber) transceivers for mobile fronthaul

279 DIN EN 61755-6-2 Fibre optic interconnecting devices and passive

components - Fibre optic connector optical

interfaces - Part 6-2: Connection of 50,0 µm core

diameter multimode physically contacting fibres

- Non-angled for reference connector

application, at wavelength of 850 nm using

traditional macrobend attenuation fibre only

(IEC 86B/4050/CDV:2017); German version

prEN 61755-6-2:2017

21

280 IEC 86B/4088/CD*CEI

86B/4088/CD*IEC 60869-1*CEI

60869-1

Fibre optic interconnecting devices and passive

components - Fibre optic passive power control

devices - Part 1: Generic specification

281 DIN EN 60154-2 Replaces:DIN EN

60154-2 (1998-04)*DIN EN 60154-

2 (2015-01)

Flanges for waveguides - Part 2: Relevant

specifications for flanges for ordinary

rectangular waveguides (IEC 60154-2:2016);

German version EN 60154-2:2016

54

282 IEC 86C/1455/CDV*CEI

86C/1455/CDV*IEC 61290-4-

4*CEI 61290-4-4

Future 61290-4-4: Optical amplifiers - Test

methods - Part 4-4: Gain transient parameters -

Single channel optical amplifiers with gain

control

283 IEC 77A/966/FDIS*CEI

77A/966/FDIS*IEC 61000-4-15

Interpretation Sheet 01*CEI 61000-

4-15 Interpretation Sheet 01

Interpretation Sheet 1- Electromagnetic

compatibility (EMC) - Part 4-15: Testing and

measurement techniques - Flickermeter -

Functional and design specifications

284 IEC 63035*CEI 63035

ReplacesIEC 100/2597/CDV (2016-

01)

MIDI (musical instrument digital interface)

specification 1.0 (Abridged Edition, 2015)

33

285 DIN EN 61938 Multimedia systems - Guide to the

recommended characteristics of analogue

interfaces to achieve interoperability (GMT)

(IEC 100/2879/CDV:2017); German version

prEN 61938:2017

67

286 DIN EN 60966-2-5*VDE 0887-

966-2-5 Replaces:DIN EN 60966-2-

5 (2010-03)*DIN EN 60966-2-5

(2014-05)

Radio frequency and coaxial cable assemblies -

Part 2-5: Detail specification for cable

assemblies for radio and TV receivers -

Frequency range 0 MHz to 1 000 MHz, IEC

61169-2 connectors (IEC 60966-2-5:2016);

German version EN 60966-2-5:2017

11

287 DIN EN 60966-2-6*VDE 0887-

966-2-6 Replaces:DIN EN 60966-2-

6 (2010-03)*DIN EN 60966-2-6

(2014-05)

Radio frequency and coaxial cable assemblies -

Part 2-6: Detail specification for cable

assemblies for radio and TV receivers -

Frequency range 0 MHz to 3 000 MHz, IEC

61169-24 connectors (IEC 60966-2-6:2016);

12




288 DIN EN 60870-5-104/A1 Telecontrol equipment and systems - Part 5-104:

Transmission protocols - Network access for

IEC 60870-5-101 using standard transport

profiles (IEC 60870-5-104:2006/A1:2016);

German version EN 60870-5-104:2006/A1:2016

5

Vật liệu xây dựng và xây dựng nhà Trở về đầu trang

289 DIN EN ISO 16890-1


10)*DIN EN ISO 16890-1 (2015-

01)

Air filters for general ventilation - Part 1:

Technical specifications, requirements and

classification system based upon particulate

matter efficiency (ePM) (ISO 16890-1:2016);

German version EN ISO 16890-1:2016

37

290 DIN EN ISO 16890-2


10)*DIN EN ISO 16890-2 (2015-

01)


Measurement of fractional efficiency and air

flow resistance (ISO 16890-2:2016); German


78

291 DIN EN ISO 16890-3


10)*DIN EN ISO 16890-3 (2015-

08)


Determination of the gravimetric efficiency and

the air flow resistance versus the mass of test

dust captured (ISO 16890-3:2016); German


31

292 DIN EN ISO 16890-4


10)*DIN EN ISO 16890-4 (2015-

08)


Conditioning method to determine the minimum

fractional test efficiency (ISO 16890-4:2016);


20

293 BS ISO 19720-1:2017 Building construction machinery and equipment.

Plants for the preparation of concrete and mortar.

Terminology and commercial specifications

28


ISO 16817:2012

Building environment design. Indoor

environment. Design process for the visual

environment

38

295 DIN ISO 11527 Buildings and civil engineering works - Sealants

- Test method for the determination of

stringiness (ISO/DIS 11527:2017); Text in

German and English

21


ISO 15686-7:2006

Buildings and constructed assets. Service life

planning. Performance evaluation for feedback

of service life data from practice

44

297 BS EN 16883:2017 Conservation of cultural heritage. Guidelines for

improving the energy performance of historic

buildings

34

298 DIN EN 17146 Determination of the strength of infill supports -

Test method and requirements; German and

English version prEN 17146:2017

48

299 VDI 2067 Blatt 50 Economic efficiency of construction parts 12

300 DIN VDE 0108-100-1*VDE 0108- Emergency escape lighting systems 15



100-1


EN 15316-2-3:2007*BS EN 15316-

3-2:2007

Energy performance of buildings - Method for

calculation of system energy requirements and

system efficiencies. - Part 3: Space distribution

systems (DHW, heating and cooling), Module

M3-6, M4-6, M8-6

40

302 BS EN 16947-1:2017 Energy Performance of Buildings. Building

Management System. Module M10-12

22


EN 15500:2008

Energy Performance of Buildings. Control for

heating, ventilating and air conditioning

applications. Electronic individual zone control

equipment. Modules M3-5, M4-5, M5-5

37


EN 12098-1:2013

Energy Performance of Buildings. Controls for

heating systems. Control equipment for hot

water heating systems. Modules M3-5, 6, 7, 8

38


EN 12098-3:2013

Energy Performance of Buildings. Controls for

heating systems. Control equipment for electrical

heating systems. Modules M3-5,6,7,8

34


EN 15459:2007

Energy performance of buildings. Economic

evaluation procedure for energy systems in

buildings. Calculation procedures, Module M1-14

56


EN 15193:2007

Energy performance of buildings. Energy

requirements for lighting. Specifications,

Module M9

104


EN 15316-2-1:2007

Energy performance of buildings. Method for


system efficiencies. Space emission systems

(heating and cooling), Module M3-5, M4-5

58

309 BS EN 15316-4-10:2017 Energy performance of buildings. Method for


system efficiencies. Wind power generation

systems, Module M11-8-7

18

310 BS EN 15316-4-2:2017

Replaces:BS EN 15316-4-2:2008



system efficiencies. Space heating generation

systems, heat pump systems, Module M3-8-2,

M8-8-2

86

311 BS EN 15316-4-3:2017

Replaces:BS EN 15316-4-

3:2007*BS EN 15316-4-6:2007



system efficiencies. Heat generation systems,

thermal solar and photovoltaic systems, Module

M3-8-3, M8-8-3, M11-8-3

106

312 BS EN 15316-4-5:2017




system efficiencies. District heating and cooling,

Module M3-8-5, M4-8-5, M8-8-5, M11-8-5

30



313 BS EN 15316-4-8:2017




system efficiencies. Space heating generation

systems, air heating and overhead radiant

heating systems, including stoves (local),

Module M3-8-8

64

314 BS EN 15316-5:2017 Energy performance of buildings. Method for


system efficiencies. Space heating and DHW

storage systems (not cooling), Module M3-7,

M8-7

54


10621:2007+A2:2012

Lock assemblies in which the operating mode

can be switched between the normal BS 8621

operating mode and a secure mode in which no

egress is possible

18


3621:2007+A2:2012

Lock assemblies operated by key from both the

inside and outside of the door

18

317 JIS A 1145:2017 Replaces:JIS A

1145:2007

Method of test for alkali-silica reactivity of

aggregates by chemical method

11

318 BS EN 451-2:2017 Replaces:BS EN

451-2:1995

Method of testing fly ash. Determination of

fineness by wet sieving

8

319 BS EN 451-1:2017 Replaces:BS EN

451-1:2003

Method of testing fly ash. Determination of free

calcium oxide content

8

320 DIN EN 17160 Product category rules for ceramic tiles; German

and English version prEN 17160:2017

103

321 VDI 2050 Blatt 3 Requirements for technical equipment rooms -

Heating systems

48

322 BS EN 13200-8:2017 Spectator facilities. Safety Management 46

323 ASTM C1848-17a Standard Practice for Installation of High-

Pressure Spray Polyurethane Foam Insulation for

the Building Enclosure

7

324 ASTM C840-17a Replaces: ASTM

C840-16

Standard Specification for Application and

Finishing of Gypsum Board

20

325 ASTM C1483/C1483M-17

Replaces: ASTM C1483-04

Standard Specification for Exterior Solar

Radiation Control Coatings on Buildings

3

326 ASTM C1149 -17 Replaces: ASTM

C1149-08

Standard Specification for Self-Supported Spray

Applied Cellulosic Thermal Insulation

7

327 DIN EN 17139 Thermal insulation products for building -

Factory made vegetal fibres based products

(VFBP); German and English version prEN

17139:2017

100

328 DIN EN 17140 Thermal insulation products for buildings -

Factory made Vacuum Insulation Panels (VIP) -

Specification; German and English version prEN

17140:2017

127



Xây dựng dân dụng (Làm đất) Trở về đầu trang

329 DIN EN ISO 22476-11


(2015-12)*DIN ISO/TS 22476-11

(2005-08)

Geotechnical investigation and testing - Field

testing - Part 11: Flat dilatometer test (ISO

22476-11:2017); German version EN ISO

22476-11:2017

25

330 DIN EN ISO 22476-6 Geotechnical investigation and testing - Field

testing - Part 6: Self boring pressuremeter test

(ISO/DIS 22476-6:2017); German and English

version prEN ISO 22476-6:2017

59

331 prEN ISO 22476-6 Geotechnical investigation and testing - Field

testing - Part 6: Self boring pressuremeter test

(ISO/DIS 22476-6:2017)

1

332 DIN EN ISO 22476-8 Geotechnical investigation and testing - Field

testing - Part 8: Full displacement pressuremeter

test (ISO/DIS 22476-8:2017); German and


56

333 prEN ISO 22476-8 Geotechnical investigation and testing - Field

testing - Part 8: Full displacement pressuremeter

test (ISO/DIS 22476-8:2017)

1


18135 (2012-04)*DIN EN ISO

17892-5 (2015-02)*DIN ISO/TS

17892-5 (2005-01)

Geotechnical investigation and testing -

Laboratory testing of soil - Part 5: Incremental

loading oedometer test (ISO 17892-5:2017);


35

May mặc . Công nghệ dệt may và da Trở về đầu trang

335 DIN SPEC 53250 Footwear - Test methods - Determination of

non-marking of outsoles

10

336 DIN EN ISO 5398-1 Leather - Chemical determination of chromic

oxide content - Part 1: Quantification by titration



23


oxide content - Part 3: Quantification by atomic

absorption spectrometry (ISO/DIS 5398-


5398-3:2017

24


oxide content - Part 4: Quantification by

inductively coupled plasma - optical emission

spectrometer (ICP-OES) (ISO/DIS 5398-


5398-4:2017

26

339 prEN ISO 5398-1 Leather - Chemical determination of chromic

oxide content - Part 1: Quantification by titration

(ISO/DIS 5398-1:2017)

10

340 prEN ISO 5398-4 Leather - Chemical determination of chromic

oxide content - Part 4: Quantification by

1



inductively coupled plasma (ICP) (ISO/DIS

5398-4:2017)

341 DIN EN ISO 4048 Leather - Chemical tests - Determination of

matter soluble in dichloromethane and free fatty

acid content (ISO/DIS 4048:2017); German and


26

342 DIN EN ISO 4045 Leather - Chemical tests - Determination of pH

and difference figure (ISO/DIS 4045:2017);

German and English version prEN ISO

4045:2017

17

343 ASTM D3775-17 Replaces: ASTM

D3775-08

Standard Test Method for End (Warp) and Pick

(Filling) Count of Woven Fabrics

4

344 EN ISO 11378-2/A1 Replaces:EN

ISO 11378-2/FprA1 (2017-02)

Textile floor coverings - Laboratory soiling tests

- Part 2: Drum test - Amendment 1 (ISO 11378-

2:2001/Amd 1:2017)

3


(2006-08)*ISO/DIS 1833-4 (2016-

11)

Textiles - Quantitative chemical analysis - Part

4: Mixtures of certain protein fibres with certain

other fibres (method using hypochlorite)

3

346 DIN EN ISO 105-B03 Textiles - Tests for colour fastness - Part B03:

Colour fastness to weathering: Outdoor exposure

(ISO/FDIS 105-B03:2017); German and English

version prEN ISO 105-B03:2017

27

Sơn và vecni Trở về đầu trang

347 prEN ISO 2812-2 Paints and varnishes - Determination of

resistance to liquids - Part 2: Water immersion

method (ISO/DIS 2812-2:2017)

1

348 DIN EN ISO 2812-2 Paints and varnishes - Determination of

resistance to liquids - Part 2: Water immersion

method (ISO/DIS 2812-2:2017); German and


18

Giấy và cactông Trở về đầu trang


ISO 11475:2004

Paper and board. Determination of CIE

whiteness, D65/100 (outdoor daylight)

24


ISO 11093-8:2012

Paper and board. Testing of cores.

Determination of natural frequency and flexural

modulus by experimental modal analysis

14

BS ISO 9416:2017 Replaces:BS

ISO 9416:2009

Paper. Determination of light scattering and

absorption coefficients (using Kubelka-Munk

theory)

20

BS ISO 11480:2017 Replaces:BS

ISO 11480:1997

Pulp, paper and board. Determination of total

chlorine and organically bound chlorine

24

Thủy tinh và gốm (Gốm) Trở về đầu trang

351 BS ISO 19628:2017 Fine ceramics (advanced ceramics, advanced

technical ceramics). Thermophysical properties

of ceramic composites. Determination of

specific heat capacity

34



Công nghệ chăm sóc sức khỏe (Thiết bị y tế) Trở về đầu trang

352 IEC 62D/1496/CDV*CEI

62D/1496/CDV*IEC 80601-2-13

AMD 2*CEI 80601-2-13 AMD

2*ISO 80601-2-13 AMD 2

Amendment 2 - Medical electrical equipment -

Part 2-13: Particular requirements for basic

safety and essential performance of an

anaesthetic workstation

353 ISO 22112 Replaces:ISO 22112

(2005-11)*ISO/FDIS 22112 (2017-

02)

Dentistry - Artificial teeth for dental prostheses 18


13978 (2012-03)*DIN EN ISO

19715 (2016-03)

Dentistry - Filling instrument with contra angle


19715:2017

18


EN ISO 9873 (2000-07)*DIN EN

ISO 9873 (2016-03)*DIN EN ISO

9873 Berichtigung 1 (2001-01)

Dentistry - Intra-oral mirrors (ISO 9873:2017);

German version EN ISO 9873:2017

20

356 BS EN ISO 19715:2017 Dentistry. Filling instrument with contra angle 18

357 BS EN ISO 7787-3:2017

Replaces:BS EN 27787-3:1994

Dentistry. Laboratory cutters. Carbide cutters for

milling machines

14


EN ISO 1797-1:2011*BS EN ISO

1797-2:1995*BS EN ISO 1797-

3:2013

Dentistry. Shanks for rotary and oscillating

instruments

18

359 DIN EN ISO 20695 Enteral feeding catheters and enteral giving sets

for single use and their connectors - Design and

testing (ISO/DIS 20695:2017); German and


106

360 IEC 62B/1060/CD*CEI

62B/1060/CD*IEC 61223-3-6*CEI

61223-3-6

Evaluation and routine testing in medical

imaging departments - Part 3-6: Acceptance and

Constancy tests - Imaging performance of

mammographic tomosynthesis mode of

operation of mammographic X-Ray equipment

361 ISO 11491 Replaces:ISO/FDIS

11491 (2017-03)

Implants for surgery - Determination of impact

resistance of ceramic femoral heads for hip joint

prostheses

9

362 DIN EN 80601-2-60*VDE 0750-2-

60

Medical Electrical Equipment - Part 2-60:

Particular requirements for the basic safety and

essential performance of dental equipment (IEC

62D/1310/CD:2015)

71

363 EN ISO 11608-7 Replaces:FprEN

ISO 11608-7 (2017-03)

Needle-based injection systems for medical use -

Requirements and test methods - Part 7:

Accessibility for persons with visual impairment

(ISO 11608-7:2016)

5

364 DIN EN ISO 81060-2 Non-invasive sphygmomanometers - Part 2:

Clinical investigation of intermittent automated

measurement type (ISO/DIS 81060-2:2017);

German and English version prEN ISO 81060-

101



2:2017

365 IEC 62C/694/DTR*CEI

62C/694/DTR*IEC/TR 61948-

3*CEI/TR 61948-3

Nuclear medicine instrumentation - Routine tests

- Part 3: Positron emission tomographs


EN ISO 11979-8 (2015-09)*DIN EN

ISO 11979-8 (2016-04)

Ophthalmic implants - Intraocular lenses - Part 8:

Fundamental requirements (ISO 11979-8:2017);


15

367 BS EN ISO 11979-8:2017


Ophthalmic implants. Intraocular lenses.

Fundamental requirements

12

368 DIN EN ISO 15747 Plastic containers for intravenous injections

(ISO/DIS 15747:2017); German and English

version prEN ISO 15747:2017

47

369 IEC 62D/1499/CDV*CEI

62D/1499/CDV*IEC 80369-3

AMD 1*CEI 80369-3 AMD 1*ISO

80369-3 AMD 1

Small-bore connectors for liquids and gases in

healthcare applications - Part 3: Connectors for

enteral applications

370 DIN SPEC 58193 Replaces:DIN

SPEC 58193 (2017-01)

Spectacles and sunglasses - Critical substances

potentially present in their materials

23

371 ASTM F382-17 Replaces: ASTM

F382-99(2008)e1

Standard Specification and Test Method for

Metallic Bone Plates

12

372 ASTM F2885 -17 Standard Specification for Metal Injection

Molded Titanium-6Aluminum-4Vanadium

Components for Surgical Implant Applications

6

373 ASTM F2886 -17 Standard Specification for Metal Injection

Molded Cobalt-28Chromium-6Molybdenum

Components for Surgical Implant Applications

5

374 ASTM F3140-17 Standard Test Method for Cyclic Fatigue Testing

of Metal Tibial Tray Components of

Unicondylar Knee Joint Replacements

6

375 ASTM F2077 -17 Replaces: ASTM

F2077-11

Test Methods For Intervertebral Body Fusion

Devices

11

Dược phẩm Trở về đầu trang

376 BS ISO 20409:2017 Traditional Chinese medicine — Panax

notoginseng root and rhizome

26

Thiết bị gia dụng – Giải trí Trở về đầu trang

377 DIN EN 60730-1/A1*VDE 0631-

1/A1

Automatic electrical controls - Part 1: General

requirements (IEC 72/1017/FDIS:2015);

German version EN 60730-1:2015/FprA1:2015

28

378 DIN EN 62820-3-1*VDE 0830-91-

3-1

Building intercom systems - Part 3-1:

Application guidelines - General (IEC

79/567/CDV:2016); German version prEN

62820-3-1:2016

34

379 DIN EN 62820-3-2*VDE 0830-91-

3-2

Building intercom systems - Part 3-2:

Application guidelines - Advanced security

building intercom systems (IEC

104



79/568/CDV:2016); German version prEN

62820-3-2:2016


1272:1998

Child care articles. Table mounted chairs. Safety

requirements and test methods

38


16890 (2015-08)

Children's furniture - Mattressess for cots and

cribs - Safety requirements and test methods;


30

382 IEC/PAS 63125*CEI/PAS 63125 Clothes washing machines for commercial use -

Methods for measuring the performance

98

383 IEC 59K/292/CD*CEI

59K/292/CD*IEC 61591*CEI 61591

Cooking fume extractors - Methods for

measuring performance

384 DIN EN 16955 Replaces:DIN 4550

(2004-12)*DIN EN 16955 (2016-

01)

Hardware for furniture - Tapered pressure tubes

for self-supporting gas springs for the height

adjustment of seating - Test methods and

requirements for strength and durability; German


14

385 DIN EN ISO 11073-10417 Health informatics - Personal health device

communication - Part 10417: Device

specialization - Glucose meter (ISO/IEEE

11073-10417:2017); English version prEN ISO

11073-10417:2017

74

386 VDE-AR-E 2849-1 Home and Building Electronic Systems - IT

security and data protection - General

requirements

52

387 DIN EN 50090-6-1 Home and Building Electronic Systems (HBES)

- Part 6-1: Interfaces - Webservice interface;

English version FprEN 50090-6-1:2017

39

388 DIN EN 60335-2-101*VDE 0700-

101 Replaces:DIN EN 60335-2-101

(2009-02)*DIN EN 60335-2-

101/A2 (2016-05)

Household and similar electrical appliances -

Safety - Part 2-101: Particular requirements for

vaporizers (IEC 60335-2-101:2002 + A1:2008 +

A2:2014); German version EN 60335-2-

101:2002 + A1:2008 + A2:2014

17

389 DIN EN 60335-2-3*VDE 0700-3

Replaces:DIN EN 60335-2-3 (2011-

04)*DIN EN 60335-2-3/A100

(2011-04)



electric irons (IEC 60335-2-3:2012, modified);


23

390 IEC 60335-2-34 AMD 2

Corrigendum 1*CEI 60335-2-34

AMD 2 Corrigendum 1



motor-compressors; Amendment 2;

Corrigendum 1

2

391 IEC 60335-2-50 Edition 4.2*CEI

60335-2-50 Edition 4.2



commercial electric bains-marie

61

392 IEC 60335-2-64 Edition 3.2*CEI

60335-2-64 Edition 3.2



commercial electric kitchen machines

133



393 IEC 61H/348/CDV*CEI

61H/348/CDV*IEC 60335-2-

71*CEI 60335-2-71



electrical heating appliances for breeding and

rearing animals

394 DIN EN 60335-2-85/A2*VDE

0700-85/A1



fabric steamers (IEC 61/5317/CDV:2017);

German version EN 60335-2-

85:2003/prA2:2017

4


61H/349/CDV*IEC 60335-2-

86*CEI 60335-2-86



electric fishing machines


61H/350/CDV*IEC 60335-2-87

AMD 1*CEI 60335-2-87 AMD 1



electrical animal stunning equipment

397 DIN EN 60335-2-95/A2*VDE

0700-95/A1



drives for vertically moving garage doors for

residential use (IEC 61/5294/CDV:2016);

German version EN 60335-2-

95:2015/prA2:2016

4

398 IEC 60335-2-99 Edition 1.1*CEI

60335-2-99 Edition 1.1



commercial electric hoods

38

399 DIN EN 50569/A1*VDE 0700-

569/A1


Safety - Particular requirements for commercial

electric spin extractors; German version EN

50569:2013/FprA1:2017

12

400 DIN EN 50570/A1*VDE 0700-

570/A1



electric tumble dryers; German version EN

50570:2013/FprA1:2017

13

401 DIN EN 50571/A1*VDE 0700-

571/A1



electric washing machines; German version EN

50571:2013/FprA1:2017

12

402 EN 13553 Replaces:EN 13553

(2015-04)*prEN 13553 (2016-06)

Resilient floor coverings - Polyvinyl chloride

floor coverings for use in special wet areas -

Specification

13

403 EN 13845 Replaces:EN 13845

(2005-08)*prEN 13845 (2015-07)

Resilient floor coverings - Polyvinyl chloride

floor coverings with particle based enhanced slip

resistance - Specification

19

404 ASTM F1918 -12(2017) Replaces:

ASTM F1918-10

Standard Safety Performance Specification for

Soft Contained Play Equipment

37

405 IEC 59F/324/CD*CEI

59F/324/CD*IEC 62885-2*CEI

Surface cleaning appliances - Part 2: Dry

vacuum cleaners for household or similar use -



62885-2 Methods for measuring the performance

406 IEC/PAS 63124*CEI/PAS 63124 Tumble dryers for commercial use - Methods for

measuring the performance

61

Bảo vệ sức khỏe. An toàn (An toàn bức xạ, Kiểm soát thảm họa và tai nạn, Thiết bị

bảo vệ) Trở về đầu trang

407 DIN VDE 0108-200*VDE 0108-

200

Electrically operated emergency way guidance

systems

16

408 DIN EN ISO 18889 Protective gloves for pesticide operators -

Performance requirements (ISO/DIS


ISO 18889:2017

33

409 IEC 45B/871/CD*CEI

45B/871/CD*IEC 63121*CEI

63121

Radiation protection instrumentation - Vehicle-

mounted mobile systems for the detection of

illicit trafficking of radioactive materials

410 ASTM F2439 -17 Replaces: ASTM

F2439-06(2011)

Standard Specification for Headgear Used in

Soccer

8

Bảo vệ sức khỏe. An toàn (Phòng cháy, Phòng nổ, Chống điện giật, Rung và xóc, Hệ

thống cảnh báo) Trở về đầu trang

411 VDI 2263 Blatt 6 Replaces:VDI

2263 Blatt 6 (2007-09)*VDI 2263

Blatt 6 (2016-01)

Dust fires and dust explosions - Hazards -

assessment - protective measures - Dust fires and

explosion protection in dust extracting

installations

71

412 VDI 2263 Blatt 6.1 Replaces:VDI

2263 Blatt 6.1 (2009-10)*VDI 2263

Blatt 6.1 (2016-01)

Dust fires and dust explosions - Hazards -

assessment - protective measures - Dust fires and

explosion protection in dust extracting

installations - Examples

102

413 VDI 2057 Blatt 1 Replaces:VDI

2057 Blatt 1 (2002-09)*VDI 2057

Blatt 1 (2015-12)

Human exposure to mechanical vibrations -

Whole-body vibration

40

414 DIN EN 60855-1*VDE 0682-214-1


05)*DIN EN 60855-1 (2013-08)

Live working - Insulating foam-filled tubes and

solid rods - Part 1: Tubes and rods of a circular

cross-section (IEC 60855-1:2016); German

version EN 60855-1:2017

36

415 DIN IEC 60364-5-56*VDE 0100-

560

Low-voltage electrical installations - Part 5-56:

Selection and erection of electrical equipment -

Safety services (IEC 64/2116/CD:2016)

54

416 BS ISO 21927-8:2017 Smoke and heat control systems. Smoke control

dampers

28

417 ASTM F3121/F3121M-17 Standard Guide for In-Service Inspection,

Maintenance, and Electrical Testing of Hand-

Held Live-Line Insulating Tools (Fiberglass-

Reinforced Plastic (FRP))

5

418 DIN VDE V 0826-2*VDE V 0826-

2

Surveillance systems - Part 2: Fire alarm systems

(BAS) for nurseries, homes, tourist

accommodations, residential buildings,

apartments and areas with residential use -

24



Design, installation, operation and maintenance

Bảo vệ sức khỏe. An toàn (Công thái học, An toàn máy) Trở về đầu trang

419 DIN EN ISO 9241-112


(2000-08, t)*DIN EN ISO 9241-112

(2015-08)

Ergonomics of human-system interaction - Part

112: Principles for the presentation of

information (ISO 9241-112:2017); German


31

420 DIN EN ISO 9241-333


(2016-04)

Ergonomics of human-system interaction - Part

333: Stereoscopic displays using glasses (ISO

9241-333:2017); German version EN ISO 9241-

333:2017

46

421 DIN EN 62998-721*VDE 0113-721 Safety of machinery - Electro-sensitive

protective equipment - Safety-related sensors

used for protection of person (IEC

44/784/CD:2017)

160

422 DIN EN ISO 13854 Safety of machinery - Minimum gaps to avoid

crushing of parts of the human body (ISO/FDIS

13854:2017); German and English version

FprEN ISO 13854:2017

24

423 DIN EN ISO 27501 The human-centred organization - Guidance for

managers (ISO/DIS 27501:2017); German and


71

Bảo vệ môi trường (Sản phẩm sinh học, Ghi nhãn sinh thái) Trở về đầu trang


16935 (2015-12)

Bio-based products - Requirements for Business-

to-Consumer communication and claims;


17

425 BS EN 16935:2017 Bio-based products. Requirements for Business-

to-Consumer communication and claims

16

426 BS EN 16810:2017 Resilient, textile and laminate floor coverings.

Environmental product declarations. Product

category rules

48

Môi trường (Chất lượng không khí, Phòng sạch, Phát thải của phương tiện giao thông)

Trở về đầu trang

427 VDI 2100 Blatt 1 Ambient air - Gas chromatographic

determination of gaseous organic compounds -

Fundamentals

26

428 DIN EN 17141 Cleanrooms and associated controlled

environments - Biocontamination control;

German and English version prEN 17141:2017

157

429 FprEN ISO 14644-15

Replaces:prEN ISO 14644-15

(2016-04)

Cleanrooms and associated controlled

environments - Part 15: Assessment of

suitability for use of equipment and materials by

airborne chemical concentration (ISO/FDIS

14644-15:2017)

1

430 VDI 3786 Blatt 12 Environmental meteorology - Meteorological

measurements - Turbulence measurements with

sonic anemometers

18



431 VDI 3787 Blatt 3 Environmental meteorology - Methods for the

human biometeorological evaluation of climate

and air quality for urban and regional planning at

regional level - Part II: Air quality

32

432 DIN EN ISO 14064-1 Greenhouse gases - Part 1: Specification with

guidance at the organization level for

quantification and reporting of greenhouse gas

emissions and removals (ISO/DIS 14064-


14064-1:2017

116

433 DIN EN ISO 14064-2 Greenhouse gases - Part 2: Specification with

guidance at the project level for quantification,

monitoring and reporting of greenhouse gas

emission reductions or removal enhancements



79

434 DIN ISO 16000-36 Indoor air - Part 36: Standard method for

assessing the reduction rate of culturable

airborne bacteria by air purifiers using a test

chamber (ISO/DIS 16000-36:2017); Text in

German and English

51


ISO 8178-1:2006

Reciprocating internal combustion engines.

Exhaust emission measurement. Test-bed

measurement systems of gaseous and particulate

emissions

162


ISO 8178-4:2007

Reciprocating internal combustion engines.

Exhaust emission measurement. Steady-state and

transient test cycles for different engine

applications

248

Môi trường (Chất lượng nước) Trở về đầu trang

437 DIN SPEC 38402-100

Replaces:DIN 38402-100 (2016-03)

German standard methods for the examination of

water, waste water and sludge - General

information (group A) - Part 100: Testing for

threshold violation, taking into account the

measurement uncertainty using statistical and

empirical methods (A 100)

47

Đo lường và phép đo (Đo tuyến tính và đo góc, Đo lưu lượng chất lỏng) Trở về đầu trang

438 ISO/FDIS 14253-1

Replaces:ISO/DIS 14253-1 (2016-

06)

Geometrical product specifications (GPS) -

Inspection by measurement of workpieces and

measuring equipment - Part 1: Decision rules for

verifying conformity or nonconformity with

specifications

21

439 JIS B 0615-1 Replaces:JIS B 0615

(2002-03-20)


Wedges - Part 1: Series of angles and slopes

12

440 JIS B 0615-2 Replaces:JIS B 0615

(2002-03-20)


Wedges - Part 2: Dimensioning and tolerancing

12




ISO 1438:2008

Hydrometry. Open channel flow measurement

using thin-plate weirs

70

Đo lường và phép đo (Phép đo đại lượng điện và từ, Phép đo bức xạ) Trở về đầu trang

442 DIN EN 62053-11*VDE 0418-3-11


11)*DIN EN 62053-11/A1 (2016-

01)

Electricity metering equipment (a.c.) - Particular

requirements - Part 11: Electromechanical

meters for active energy (classes 0,5, 1 and 2)

(IEC 62053-11:2003 + A1:2016); German

version EN 62053-11:2003 + A1:2017

24

443 DIN EN 62618*VDE 0493-3-8

Replaces:DIN IEC 62618 (2012-01)

Radiation protection instrumentation -

Spectroscopy-based alarming Personal Radiation

Detectors (SPRD) for the detection of illicit

trafficking of radioactive material (IEC

62618:2013); German version EN 62618:2016

43

444 DIN ISO 4037-3*VDE 0412-4037-

3

Radiological protection - X and gamma

reference radiation for calibrating dosemeters

and doserate meters and for determining their

response as a function of photon energy - Part 3:

Calibration of area and personal dosemeters and

the measurement of their response as a function

of energy and angle of incidence (ISO/DIS

4037-3:2017)

156

445 DIN ISO 4037-4*VDE 0412-4037-

4

Radiological protection - X and gamma

reference radiation for calibrating dosemeters

and doserate meters and for determining their

response as a function of photon energy - Part 4:

Calibration of area and personal dosemeters in

low energy X reference radiation fields

(ISO/DIS 4037-4:2017)

45

446 DIN IEC 63085*VDE 0412-15 System of spectral identification of liquids in

transparent containers (Raman systems) (IEC

45B/857/CD:2017)

36

Âm học và phép đo âm Trở về đầu trang

447 DIN EN ISO 3740 Acoustics - Determination of sound power levels

of noise sources - Guidelines for the use of basic

standards (ISO/DIS 3740:2017); German and


77

448 DIN EN ISO 17201-1 Acoustics - Noise from shooting ranges - Part 1:

Determination of muzzle blast by measurement



97

449 IEC 29/955/CDV*CEI

29/955/CDV*IEC 62489-1 AMD

2*CEI 62489-1 AMD 2

Amendment 2 - Electroacoustics - Audio-

frequency induction loop systems for assisted

hearing - Part 1: Methods of measuring and

specifying the performance of system

components

450 DIN EN ISO 13473-1 Characterization of pavement texture by use of

surface profiles - Part 1: Determination of mean

106



profile depth (ISO/DIS 13473-1:2017); German

and English version prEN ISO 13473-1:2017

451 DIN EN ISO 80000-8 Quantities and units - Part 8: Acoustics



27

Thử nghiệm (Thử nghiệm không phá hủy, Thử nghiệm môi trường) Trở về đầu trang

452 DIN EN 60068-2-67/A1*VDE

0468-2-67/A1

Environmental testing - Part 2-67: Tests - Test

Cy: Damp heat, steady state, accelerated test

primarily intended for components (IEC

104/725/CD:2017)

4


EN ISO 20339 (2016-01)

Non-destructive testing - Equipment for eddy

current examination - Array probe characteristics

and verification (ISO 20339:2017); German


32

454 prEN ISO 20769-1 Non-destructive testing - Radiographic

inspection of corrosion and deposits in pipes by

X- and gamma rays - Part 1: Tangential

radiographic inspection (ISO/DIS 20769-1:2017)

1

455 prEN ISO 20769-2 Non-destructive testing - Radiographic

inspection of corrosion and deposits in pipes by

X- and gamma rays - Part 2: Double wall

radiographic inspection (ISO/DIS 20769-2:2017)

1

456 BS EN ISO 20339:2017 Non-destructive testing. Equipment for eddy

current examination. Array probe characteristics

and verification

30

457 BS EN ISO 20484:2017

Replaces:BS EN 1330-8:1998

Non-destructive testing. Leak testing.

Vocabulary

18

Thử nghiệm (Phân tích cỡ hạt) Trở về đầu trang

458 BS ISO 20998-3:2017 Measurement and characterization of particles

by acoustic methods. Guidelines for non-linear

theory

34

Dịch vụ. Tổ chức, quản lý và chất lượng công ty Trở về đầu trang

459 BS 11000-2:2017 Replaces:BS

11000-2:2011

Collaborative business relationship management

systems. Guide to implementing BS ISO 44001

90

460 ISO/IEC TR 17028 Conformity assessment - Guidelines and

examples of a certification scheme for services

32

461 EN ISO 18295-1 Replaces:EN

15838 (2009-11)*FprEN ISO

18295-1 (2017-03)

Customer contact centres - Part 1: Requirements

for customer contact centres (ISO 18295-1:2017)

3

462 EN ISO 18295-2 Replaces:EN

15838 (2009-11)*FprEN ISO

18295-2 (2017-03)

Customer contact centres - Part 2: Requirements

for clients using the services of customer contact

centres (ISO 18295-2:2017)

3

463 BS ISO 19731:2017 Digital analytics and web analyses for purposes

of market, opinion and social research.

Vocabulary and service requirements

26



464 DIN ISO 50015 Energy management systems - Measurement and

verification of energy performance of

organizations - General principles and guidance

(ISO 50015:2014); Text in German and English

53

465 prEN ISO 19011 Guidelines for auditing management systems

(ISO/DIS 19011:2017)

1

466 BS ISO 21505:2017 Project, programme and portfolio management.

Guidance on governance

30

467 VDI 3633 Blatt 9 Simulation of systems in materials handling,

logistics and production - Spreadsheets with

relevance for Simulation

14

Bao gói và phân phối hàng hóa Trở về đầu trang


EN 15008:2006

Aerosol containers. Aluminium containers -

Dimensions of one-piece cans with 25,4 mm

aperture

11

Tài liệu sản phẩm kỹ thuật Trở về đầu trang

469 DIN ISO 16016 Replaces:DIN ISO

16016 (2007-12)*DIN ISO 16016

(2017-01)

Technical product documentation - Protection

notices for restricting the use of documents and

products (ISO 16016:2016)

13

Để có toàn văn các tiêu chuẩn trên hoặc các tiêu chuẩn khác, vui lòng liên hệ:

Quầy dịch vụ tham khảo – Thư viện Trường ĐH Công nghiệp TP. HCM

12 Nguyễn Văn Bảo, Phường 4, Quận Gò Vấp, TP. HCM

Email: [email protected]

Điện thoại: 083.8940 390 – 131.

tiÊu chuẨn mỚi thÁng 10/2017lib.iuh.edu.vn/.../2018/03/bantin_tieuchuan_10_2017.pdfdịch vụ...

Documents