tiÊu chuẨn mỚi thÁng 03/2017lib.iuh.edu.vn/wp-content/uploads/2017/08/bantin_tieu...quy...

TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH

TRUNG TÂM THÔNG TIN – THƯ VIỆN

TIÊU CHUẨN MỚI THÁNG 03/2017

QUY CHUẨN KỸ THUẬT VIỆT NAM (QCVN)………………………………..2

Thủy sản – Máy bơm – Viễn thông………………………………………………2

TIÊU CHUẨN QUỐC GIA VIỆT NAM (TCVN)……………………………….2

Đường thủy………………………………………………………………………………..2

Cao su – Dầu mỏ.………………………………………………………………….2

Máy nông nghiệp…………………………………………………………….........2

Xây dựng – Vật liệu xây dựng…………………………………………………….2

TIÊU CHUẨN NƯỚC NGOÀI………………………………………………….....3

Công nghệ thông tin……………………………………………………………….3

Điện, điện tử - Thiết bị điện, điện tử……………………………………………...3

Ô tô - Giao thông – Vận tải………………………………………………………..6

Đường sắt - Tàu thủy – Hàng hải ……………………………………………........6

Không gian vũ trụ…………………………………………………… …………...7

Cơ khí – Chế tạo…………………………………………………………………..7

Máy bơm – Bơm nhiệt…………………………………………………………….9

Luyện kim – Sản phẩm kim loại…………………………………………………9

Vật liệu xây dựng – Thiết bị và máy móc xây dựng……………………………..11

Chất dẻo – Cao su …………………………………………………………….....12

Hóa học…………………………………………………………………………..13

Phân bón – Thuốc trừ sâu……………………………………………………......15

Hạt nhân – Quang học …………………………………………………………...15

Dầu mỏ - Khoáng sản…………………………………………………………….15

Giấy – Dệt - Gỗ………………………………………………………………….16

Thủy tinh - Gốm sứ ……………………………………………………………..16

Dầu và mỡ động vật và thực vật………………………………………………....16

Mỹ phẩm ………………………………………………………………………...17

Thiết bị y tế - Chăm sóc sức khỏe…………………………………………….....17

Giải trí…………………………………………………………………………....17

Chất lượng đất – Chất thải……………………………………………………….17

Yêu cầu an toàn…………………………………………………………………..18

Tài liệu hướng dẫn trong sản xuất, kinh doanh…………………………………..18

Thử nghiệm – Phép đo…………………………………………………………...18

2

TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4

QUY CHUẨN KỸ THUẬT VIỆT NAM (QCVN)

Thủy sản – Máy bơm – Viễn thông Trở về đầu trang

1 QCVN 02-

23:2017/BNNPTNT

Quy chuẩn kỹ thuật quốc gia - cơ sở sản xuất kinh

doanh thủy sản nhỏ lẻ - yêu cầu đảm bảo an toàn

thực phẩm

7

2 QCVN 10:2017/BTC Quy chuẩn kỹ thuật quốc gia đối với máy bơm

nước chữa cháy ( đồng bộ thiết bị chữa cháy rừng)

dự trữ quốc gia

18

3 QCVN 18:2014/BTTTT Quy chuẩn kỹ thuật quốc gia về tương thích điện từ

đối với thiết bị thông tin vô tuyến điện

39

TIÊU CHUẨN QUỐC GIA VIỆT NAM (TCVN)

Đường thủy Trở về đầu trang

4 TCVN 10568:2017 Bộ neo cáp cường độ cao. Neo tròn t13, t15 và neo

dẹt d13, d15

24

5 TCVN 11392:2017 Bảo dưỡng thường xuyên đường thủy nội địa 64

Cao su – Dầu mỏ Trở về đầu trang

6 TCVN 3769:2016 -Thay

thế:TCVN 3769:2004

Cao su thiên nhiên SVR. Quy định kỹ thuật 11

7 TCVN 8365-3:2010 Sản phẩm dầu mỏ. Nhiên liệu (loại f). Phân loại.

Phần 3: Họ L (khí dầu mỏ hóa lỏng)

6

Máy nông nghiệp Trở về đầu trang

8 TCVN 8744-1:2011-

Thay thế:TCVN 6818-

3:2001

Máy kéo và máy tự hành dùng trong lâm nghiệp.

An toàn. Phần1: Máy kéo tiêu chuẩn

19

9 TCVN 9193:2012 Máy kéo và máy tự hành dùng trong nông nghiệp.

Cơ cấu điều khiển vận hành. Lực tác động, độ dịch

chuyển, vị trí và phương pháp vận hành

28

Xây dựng – Vật liệu xây dựng Trở về đầu trang

10 TCVN 10567:2017 Dầm cầu thép. Liên kết bằng bu lông cường độ cao.

Thi công và nghiệm thu

31

11 TCVN 11474:2016 Lớp phủ hữu cơ. Xác định độ chịu mài mòn bằng

thiết bị taber

14

12 TCVN 11475:2016 Lớp phủ trên nền bê tông xi măng và nền vữa xây.

Hướng dẫn giám sát thi công

27

13 TCVN 11520:2016 Móng cọc vít có cánh đơn ở mũi. Yêu cầu thiết kế 48

14 TCVN 11712:2017 Nhựa đường. Phương pháp xác định đặc tính chống

nứt ở nhiệt độ thấp bằng thiết bị kéo trực tiếp (DT)

25

3

TIÊU CHUẨN NƯỚC NGOÀI

Công nghệ thông tin Trở về đầu trang

15 ISO/IEC 2382-37:2017

Replace: ISO/IEC 2382-

37:2012

Information technology -- Vocabulary -- Part 37:

Biometrics

27

Điện, điện tử - Thiết bị điện, điện tử Trở về đầu trang

16 BS EN 50593:2017 Electric dishwashers for commercial use. Test

methods for measuring the performance

32

17 BS EN 50242:2016, BS

EN 60436:2016- Replace:

BS EN

60436:2008+A11:2012,

BS EN 50242:2008

Electric dishwashers for household use. Methods

for measuring the performance

86

18 BS EN 61000-4-10:2017

-Replace: BS EN 61000-

4-10:1994, IEC 61000-4-

10:1993

Electromagnetic compatibility (EMC). Testing and

measurement techniques. Damped oscillatory

magnetic field immunity test

48

19 BS EN 50588-

1:2015+A1:2016

Replace: BS EN 50541-

1:2011, BS EN 50464-

1:2007+A1:2012

Medium power transformers 50 Hz, with highest

voltage for equipment not exceeding 36 kV.

General requirements

36

20 BS EN 50341-2-13:2017


3:2001, BS EN 50423-

3:2005

Overhead electrical lines exceeding AC 1 kV.

National Normative Aspects (NNA) for ITALY

(based on EN 50341-1:2012)

36

21 BS EN 50341-2-16:2016


3:2001, BS EN 50423-

3:2005

Overhead electrical lines exceeding AC 1 kV.

National Normative Aspects (NNA) for NORWAY

(based on EN 50341-1:2012)

36

22 BS EN 50849:2017

Replace: BS EN

60849:1998, IEC

60849:1998

Sound systems for emergency purposes 30

23 IEC 60092-376:2017

PRV - Replace: IEC

60092-376:2003

Electrical installations in ships - Part 376: Cables

for control and instrumentation circuits 150/250 V

(300 V)

25

24 IEC 60645-1:2017 RLV -

Replace: IEC 60645-

1:2012

Electroacoustics - Audiometric equipment - Part 1:

Equipment for pure-tone and speech audiometry

133

25 IEC 60728-12:2017

PRV - Replace: IEC

60728-12:2001

Cable networks for television signals, sound signals

and interactive services - Part 12: Electromagnetic

compatibility of systems

26

http://shop.bsigroup.com/ProductDetail/?pid=000000000030229731




4

26 IEC 60749-3:2017 -

Replace: IEC 60749-

3:2002/COR1:2003

Semiconductor devices - Mechanical and climatic

test methods - Part 3: External visual examination

11

27 IEC 60749-

4:2017 Replace: IEC

60749-

4:2002/COR1:2003


test methods - Part 4: Damp heat, steady state,

highly accelerated stress test (HAST)

9

28 IEC 60749-6:2017 -

Replace: IEC 60749-

6:2002/COR1:2003


test methods - Part 6: Storage at high temperature

8

29 IEC 60749-9:2017 -

Replace: IEC 60749-

9:2002/COR1:2003


test methods - Part 9: Permanence of marking

9

30 IEC 61076-3-104:2017

PRV - Replace: IEC

61076-3-104:2006

Connectors for electronic equipment - Product

requirements - Part 3-104: Detail specification for

8-way, shielded free and fixed connectors for data

transmissions with frequencies up to 2 000 MHz

84

31 IEC 61184:2017 PRV -

Replace: IEC

61184:2008/COR2:2012

Bayonet lampholders 131

32 IEC 61300-2-55:2017 Fibre optic interconnecting devices and passive

components - Basic test and measurement

procedures - Part 2-55: Tests - Strength of mounted

adaptor

15

33 IEC 61724-1:2017 Photovoltaic system performance - Part 1:

Monitoring

57

34 IEC 61951-1:2017 -

Replace: IEC 61951-

1:2013

Secondary cells and batteries containing alkaline or

other non-acid electrolytes - Secondary sealed cells

and batteries for portable applications - Part 1:

Nickel-Cadmium

81

35 IEC 62056-7-3:2017 Electricity metering data exchange - The

DLMS/COSEM suite - Part 7-3: Wired and

wireless M-Bus communication profiles for local

and neighbourhood networks

37

36 IEC 62343:2017 PRV

Pre release version -

Replace: IEC 62343:2013

Dynamic modules - General and guidance 25

37 IEC 62561-1:2017 RLV -

Replace: IEC 62561-

1:2012

Lightning protection system components (LPSC) -

Part 1: Requirements for connection components

74

38 IEC 62586-1:2017 PRV -

Replace: IEC 62586-

1:2013

Power quality measurement in power supply

systems - Part 1: Power quality instruments (PQI)

72

https://webstore.iec.ch/publication/6896

5

39 IEC 62586-2:2017 -

Replace: IEC 62586-

2:2013/COR1:2014

Power quality measurement in power supply

systems - Part 2: Functional tests and uncertainty

requirements

141

40 IEC 62830-1:2017 Semiconductor devices - Semiconductor devices

for energy harvesting and generation - Part 1:

Vibration based piezoelectric energy harvesting

44

41 IEC 62899-401:2017 Printed electronics - Part 401: Printability -

Overview

11

42 IEC 62909-1:2017 PRV Bi-directional grid connected power converters -

Part 1: General requirements

92

43 IEC 62943:2017 Visible light beacon system for multimedia

applications

45

44 IEC TR 61189-3-

914:2017

Test methods for electrical materials, printed

boards and other interconnection structures and

assemblies - Part 3-914: Test method for thermal

conductivity of printed circuit boards for high-

brightness LEDs - Guidelines

24

45 IEC TR 61243-6:2017 Live working - Voltage detectors - Part 6:

Guidelines on non-contact voltage detectors

(NCVD) for use at nominal voltages above 1 kV

AC

39

46 IEC TS

62370:2004+AMD1:2017

CSV - Replace: IEC TS

62370:2004

Electroacoustics - Instruments for the measurement

of sound intensity - Electromagnetic and

electrostatic compatibility requirements and test

procedures

26

47 IEC 62899-402-1:2017 Printed electronics - Part 402-1: Printability -

Measurement of qualities - Pattern width

12

48 IEC 62899-502-1:2017 Printed electronics - Part 502-1: Quality assessment

- Organic light emitting diode (OLED) elements -

Mechanical stress testing of OLED elements

formed on flexible substrates

22

49 IEC 60287-3-1:2017

PRV - Replace: IEC

60287-3-

1:1995+AMD1:1999

CSV

Electric cables - Calculation of the current rating -

Part 3-1: Operating conditions – Site reference

conditions

51

50 IEC 62680-3-1:2017 Universal Serial Bus interfaces for data and power

- Part 3-1: Universal Serial Bus 3.1 Specification

639

51 IEC 61800-9-1:2017 Adjustable speed electrical power drive systems -

Part 9-1: Ecodesign for power drive systems, motor

starters, power electronics and their driven

applications - General requirements for setting

energy efficiency standards for power driven

equipment using the extended product approach

61

6

(EPA) and semi analytic model (SAM)

52 IEC 61800-9-2:2017 Adjustable speed electrical power drive systems -

Part 9-2: Ecodesign for power drive systems, motor

starters, power electronics and their driven

applications - Energy efficiency indicators for

power drive systems and motor starters

226

53 IEC 61400-12-1:2017

RLV Replace: IEC

60601-1-

8:2006+AMD1:2012

CSV

Wind energy generation systems - Part 12-1: Power

performance measurements of electricity producing

wind turbines

55

54 JIS C 8461-21:2016 Conduit systems for cable management -- Part 21:

Particular requirements -- Rigid conduit systems

16


Particular requirements -- Pliable conduit systems

16


Particular requirements -- Flexible conduit systems

14

57 JIS C 4213:2014 Low-voltage three-phase squirrel-cage induction

motors -- Low-voltage top runner motor

55

58 JIS C 3662-

7:2010/AMENDMENT

1:2017

Polyvinyl chloride insulated cables of rated

voltages up to and including 450/750 V -- Part 7:

Flexible cables screened and unscreened with two

or more conductors (Amendment 1)

3

59 JIS X 6319-4:2016 -

Replace:JIS X 6319-

4:2016

Specification of implementation for integrated

circuit(s) cards. Part 4: High speed proximity cards

123

60 PD IEC/TS 62861:2017 Guidelines for principal component reliability

testing for LED light sources and LED luminaires

70

Ô tô - Giao thông – Vận tải Trở về đầu trang

61 IEC

60810:2014+AMD1:2017

CSV - Replace: IEC

60810:2014

Lamps for road vehicles - Performance

requirements

266

62 ISO/TS 19091:2017 Intelligent transport systems — Cooperative ITS —

Using V2I and I2V communications for

applications related to signalized intersections

211

Đường sắt - Tàu thủy – Hàng hải Trở về đầu trang

63 BS EN 14730-1:2017


1:2006+A1:2010

Railway applications. Track. Aluminothermic

welding of rails. Approval of welding processes

46

64 BS EN 16584-2:2017 Railway applications. Design for PRM use.

General requirements. Information

96

7

65 BS EN 50124-1:2017-


1:2001+A2:2005

Railway applications. Insulation coordination.

Basic requirements. Clearances and creepage

distances for all electrical and electronic equipment

58

66 BS EN 50124-2:2017


2:2001

Railway applications. Insulation coordination.

Overvoltages and related protection

18

67 ISO 18154:2017 Ships and marine technology — Safety valve for

cargo tanks of LNG carriers — Design and testing

requirements

11

Không gian vũ trụ Trở về đầu trang

68 BS EN 2033:2017 Aerospace series. Strips, cold rolled in steel,

Thickness 0,1 mm ≤ a ≤ 2,5 mm. Dimensions

12

69 BS EN 3646-005:2017-


005:2006

Aerospace series. Connectors, electrical, circular,

bayonet coupling, operating temperature 175 °C or

200 °C continuous. Receptacle, hermetic, square

flange mounting. Product standard

12

70 BS EN 4165-024:2017


024:2011

Aerospace series. Connectors, electrical,

rectangular, modular. Operating temperature 175

°C continuous. Single module plug. Product

standard

Pages;18

71 BS EN 4165-025:2017


025:2011

Aerospace series. Connectors, electrical,

rectangular, modular. Operating temperature 175

°C continuous. Single module receptacle. Product

standard

32

72 BS EN 4604-009:2017 -


009:2014

Aerospace series. Cable, electrical, for signal

transmission. Cable, coaxial, light weight, 50 ohms,

180 °C, type KW (light WN). Product standard

16

73 BS EN 4708-101:2017 Aerospace series. Sleeving, heat-shrinkable, for

binding, insulation and identification. Polyolefin

sleeving. Operating temperatures -55 °C to 135 °C.

Product standard

16

74 BS ISO 19826:2017 Space systems. Programme management.

Management of product characteristics

24

75 ISO 15872:2017 -

Replace: 15872:2002

Aerospace — UNJ threads — Gauging 22

Cơ khí – Chế tạo Trở về đầu trang

76 ASTM F2348 -04(2017) -

Replace: ASTM F2348-

04(2010)

Standard Performance Specification for Privacy

Padlocks has been reapproved, available as F2348-

04(2017)

5

77 ASTM C1129 -17-

Replace: ASTM C1129-

12

Standard Practice for Estimation of Heat Savings

by Adding Thermal Insulation to Bare Valves and

Flanges

8



8

78 ASTM F2155 -01(2017)-


01(2009)

Standard Specification for Performance of Hasps

and Other Attachment Devices for Padlocks or

Seals

15

79 BS ISO 3547-2:2017-

Replace: BS ISO 3547-

2:2006

Plain bearings. Wrapped bushes. Test data for

outside and inside diameters

22

80 IEC 62841-2-17:2017

PRV

Electric motor-operated hand-held tools,

transportable tools and lawn and garden machinery

- Safety - Part 2-17: Particular requirements for

hand-held routers

46

81 IEC 62974-1:2017 PRV Monitoring and measuring systems used for data

collection, gathering and analysis - Part 1: Device

requirements

55

82 IEC TS 62861:2017 Guidelines for principal component reliability

testing for LED light sources and LED luminaires

65

83 IEC TS 60079-32-

1:2013+AMD1:2017

CSV - Replace: IEC TS

60079-32-1:2013

Explosive atmospheres - Part 32-1: Electrostatic

hazards, guidance

354

84 IEC 61000-4-39:2017 Electromagnetic compatibility (EMC) - Part 4-39:

Testing and measurement techniques - Radiated

fields in close proximity - Immunity test

82

85 IEC 60364-4-

41:2005+AMD1:2017

CSV - Replace: IEC

60364-4-41:2005

Low voltage electrical installations - Part 4-41:

Protection for safety - Protection against electric

shock

152

86 IEC 60068-2-69:2017 -

Replace: IEC 60068-2-

69:2007

Environmental testing - Part 2-69: Tests - Test

Te/Tc: Solderability testing of electronic

components and printed boards by the wetting

balance (force measurement) method

110

87 IEC TR 62977-2-3:2017 Electronic display devices - Part 2-3:

Measurements of optical properties - Multi-colour

test patterns

16

88 IEC 60068-2-18:2017

RLV - Replace: IEC

60068-2-18:2000

Environmental testing - Part 2-18: Tests - Test R

and guidance: Water

140

89 IEC 61280-4-4:2017 -

Replace: IEC 61280-4-

4:2006

Fibre optic communication subsystem test

procedures - Part 4-4: Cable plants and links -

Polarization mode dispersion measurement for

installed links

82

90 IEC 62715-5-1:2017

PRV

Flexible display devices - Part 5-1: Measuring

methods of optical performance

50

91 IEC 62715-6-2:2017 Flexible display devices - Part 6-2: Environmental 15

9

PRV testing methods

92 ISO 19690-1:2017 Disc springs — Part 1: Calculation 13

93 ISO 9349:2017 -

Replace: ISO 9349:2004

Ductile iron pipes, fittings, accessories and their

joints — Thermal preinsulated products

7

94 ISO 19649:2017 Mobile robots — Vocabulary 10

95 ISO 12132:2017 -


Plain bearings — Quality assurance of thin-walled

half bearings — Design FMEA

7

96 ISO 12302:2017 -

Replace:ISO 12302:93

Plain bearings — Quality characteristics —

Statistical process control (SPC)

4

97 ISO 15236-3:2017 -

Replace: ISO 15236-

3:2007

Steel cord conveyor belts — Part 3: Special safety

requirements for belts for use in underground

installations

14

98 ISO 13715:2017 -


Technical product documentation — Edges of

undefined shape — Indication and dimensioning

22

99 JIS B 8247:2016 Formed head for pressure vessel 11

100 JIS B 1861:2016 V-belts and V-ribbed belts -- Test method for

determination of centre distance variation

8

101 JIS Z 3021:2016 Welding and allied processes -- Symbolic

representation

54

Máy bơm – Bơm nhiệt Trở về đầu trang

102 BS EN 16905-1:2017 Gas-fired endothermic engine driven heat pumps.

Terms and definitions

32


Test conditions

24


Test methods

100


Calculation of seasonal performances in heating

and cooling mode

62

106 JIS B 8327:2013 -

Replace:JIS B 8327:2002

Testing methods for performance of pump, using

model pump

77

Luyện kim – Sản phẩm kim loại Trở về đầu trang

107 ASTM F2247 -11(2017)-


11

Standard Test Method for Metal Doors Used in

Blast Resistant Applications (Equivalent Static

Load Method)

14

108 BS EN 16914:2017 Aluminium and aluminium alloys. Hot-rolled

armour plates in weldable aluminium alloy.

Technical delivery conditions

22

10

109 BS EN 515:2017 -

Replace: BS EN

515:1993

Aluminium and aluminium alloys. Wrought

products. Temper designations

30

110 BS EN 13523-29:2017 -


29:2010

Coil coated metals. Test methods. Resistance to

environmental soiling (Dirt pick-up and striping)

14

111 BS EN 13523-12:2017


12:2004

Coil coated metals. Test methods. Resistance to

scratching

12

112 BS EN 1559-5:2017 -


5:1998

Founding. Technical conditions of delivery.

Additional requirements for magnesium alloy

castings

14

113 BS EN 12421:2017 -

Replace: BS EN

12421:1998

Magnesium and magnesium alloys. Unalloyed

magnesium

16

114 ISO 6509-2:2017 -

Replace: ISO 6509-

2:1981

Corrosion of metals and alloys — Determination of

dezincification resistance of copper alloys with

zinc — Part 2: Assessment criteria

3

115 ISO 9227:2017 -


Corrosion tests in artificial atmospheres — Salt

spray tests

18

116 ISO 12106:2017 -


Metallic materials — Fatigue testing — Axial-

strain-controlled method

38

117 JIS G 3462:2016/AMD1 Alloy steel tubes for boiler and heat exchanger

(Amendment 1)

1

118 JIS G 3441:2016/AMD1 Alloy steel tubes for machine purposes

(Amendment 1)

2

119 JIS Z 8921:2016 Carbon nanotube composite resin coating film 8

120 JIS G 3456:2016/AMD1 Carbon steel pipes for high temperature service

(Amendment 1)

2

121 JIS G 3452:2016/AMD1 Carbon steel pipes for ordinary piping

(Amendment 1)

1

122 JIS G

3475:2016R/AMD2

Carbon steel tubes for building structure

(Amendment 2)

1

123 JIS G 3478:2016/AMD1 Carbon steel tubes for general machine structural

purposes (Amendment 1)

1

124 JIS G 4051:2016 Carbon steels for machine structural use 22

125 JIS G 3442:2016/AMD1 Galvanized steel pipes for ordinary piping

(Amendment 1)

1

126 JIS G

3474:2016R/AMD2

High tensile strength steel tubes for steel tower

(Amendment 2)

1

127 JIS G 4053:2016 Low-alloyed steels for machine structural use 20

11

128 JIS H 7501:2016 -

Replace:JIS H 7501:2002

Method for evaluation of tensile properties of

metallic superplastic materials

16

129 JIS G 3447:2016/AMD1 Stainless steel sanitary pipes (Amendment 1) 1

130 JIS B 7512:2016 Steel tape measures 10

131 JIS G 3479:2016/AMD1 Steel tuber for machine structure with specified

hardenability bands (Amendment 1)

2

132 JIS G 4052:2016 Structural steels with specified hardenability bands 43

133 JIS G 0802:2016 Ultrasonic testing of stainless steel plates 29

Vật liệu xây dựng – Thiết bị và máy móc xây dựng Trở về đầu trang

134 ASTM C834 -17 -

Replace: ASTM C834-14

Standard Specification for Latex Sealants 3

135 ASTM E1795 -17 -

Replace: ASTM E1795-

12

Standard Specification for Non-Reinforced Liquid

Coating Encapsulation Products for Leaded Paint

in Buildings

6

136 ASTM C1014 -17 -

Replace: ASTM C1014-

08(2013)

Standard Specification for Spray-Applied Mineral

Fiber Thermal and Sound Absorbing Insulation

3

137 ASTM E2114 -17 -


08

Standard Terminology for Sustainability Relative

to the Performance of Buildings

5

138 ASTM D8 -17 -Replace:

ASTM D8-16b

Standard Terminology Relating to Materials for

Roads and Pavements

4

139 BS EN 16497-2:2017 Chimneys. Concrete System Chimneys . Balanced

flue applications

52

140 BS EN 15651-5:2017


5:2012

Sealants for non-structural use in joints in buildings

and pedestrian walkways. Assessment and

verification of constancy of performance, marking

and labelling

18

141 ISO 15818:2017 Earth-moving machinery -- Lifting and tying-down

attachment points -- Performance requirements

20

142 ISO 15818:2017 Earth-moving machinery — Lifting and tying-

down attachment points — Performance

requirements

20

143 ISO 12540:2017 Glass in building — Tempered soda lime silicate

safety glass

33

144 JIS R 5214:2016/AMD1 Ecocement (Amendment 1) 5

145 JIS A 5363:2016 Precast concrete products -- General rules for

methods of performance test

24

146 JIS A 5308:2014 -

Replace:JIS A 5308:2011

Ready- mixed concrete 55

12

147 JIS A 5758:2016 Sealants for sealing and glazing in buildings 17

148 JIS A 1454:2016 -


Test methods --- Resilient floorcoverings 82

Chất dẻo – Cao su Trở về đầu trang

149 ASTM D2219-17-

Replace: ASTM D2219-

11

Standard Specification for Poly(Vinyl Chloride)

Insulation for Wire and Cable, 60°C Operation

3

150 ASTM D2220-17 -


11

Standard Specification for Poly(Vinyl Chloride)

Insulation for Wire and Cable, 75°C Operation

3

151 ASTM D3349-17-


12

Standard Test Method for Absorption Coefficient

of Ethylene Polymer Material Pigmented with

Carbon Black

12

152 ISO 19929:2017 Plastics — Determination of average molecular

mass and mixture ratio of poly(ethylene glycol) and

its derivatives by MALDI-TOF-MS

13

153 ISO 15023-1:2017 -

Replace: ISO 15023-

1:2001

Plastics — Poly(vinyl alcohol) (PVAL) materials

— Part 1: Designation system and basis for

specifications

154 ISO 16396-2:2017 -

Replace: ISO 16396-

2:2012

Plastics — Polyamide (PA) moulding and

extrusion materials — Part 2: Preparation of test

specimens and determination of properties

10

155 ISO 20028-1:2017 -

Replace: ISO 20028-

1:2013

Plastics — Thermoplastic polyester (TP) moulding

and extrusion materials — Part 1: Designation

system and basis for specifications

13

156 ISO 20028-2:2017 -

Replace: ISO 20028-

2:2012

Plastics — Thermoplastic polyester (TP) moulding

and extrusion materials — Part 2: Preparation of

test specimens and determination of properties

7

157 JIS K 6778:2016 -

Replace:JIS K 6778:2009

Polybutene (PB) pipes 27

158 JIS K 6779:2016 -


Polybutene (PB) pipe fittings 23

159 ASTM D4818 -89(2017)-


89(2012)

Standard Classification for Rubber Compounding

Materials—Vulcanization Accelerators

4

160 ASTM D4924 -89(2017)

-Replace: ASTM D4924-

89(2012)

Standard Classification for Petroleum Waxes for

Use in Rubber Compounding

2

161 ASTM D5377 -93(2017)


93(2012)

Standard Classification for Rubber Compounding

Materialsx2014;Ground Coal

2

13

162 ASTM D395-16e1-

Replace: ASTM D395-16

Standard Test Methods for Rubber Property—

Compression Set

8

163 BS EN 1762:2017-

Replace: BS EN

1762:2003

Rubber hoses and hose assemblies for liquefied

petroleum gas, LPG (liquid or gaseous phase), and

natural gas up to 25 bar (2,5 MPa). Specification

24

164 BS ISO 15825:2017 Rubber compounding ingredients. Carbon black.

Determination of aggregate size distribution by

disc centrifuge photosedimentometry

20

165 BS ISO 9298:2017 Rubber compounding ingredients. Zinc oxide. Test

methods

22

166 ISO 9298:2017 -


Rubber compounding ingredients — Zinc oxide —

Test methods

13

167 JIS C 3663-

8:2010/AMENDMENT

1:2017

Rubber insulated cables -- Rated voltages up to and

including 450/750 V -- Part 8: Cords for

applications requiring high flexibility (Amendment

1)

3

168 JIS K 6254:2016 Rubber, vulcanized or thermoplastic --

Determination of stress-strain properties

28

Hóa học Trở về đầu trang

169 ASTM D5919 -96(2017)-


96(2011)

Standard Practice for Determination of Adsorptive

Capacity of Activated Carbon by a Micro-Isotherm

Technique for Adsorbates at ppb Concentrations

5

170 ASTM E1644 -17 -


04(2016)e1

Standard Practice for Hot Plate Digestion of Dust

Wipe Samples for the Determination of Lead

4

171 ASTM E1979 -17 -


12(2016)

Standard Practice for Ultrasonic Extraction of

Paint, Dust, Soil, and Air Samples for Subsequent

Determination of Lead

7

172 ASTM B987/B987M -17

-Replace: ASTM

B987/B987M-14

Standard Specification for Carbon Fiber Thermoset

Polymer Matrix Composite Core (CFC) for use in

Overhead Electrical Conductors

5

173 ASTM C1594 -11(2017)

-Replace: ASTM C1594-

11

Standard Specification for Polyimide Rigid

Cellular Thermal Insulation

11

174 ASTM D2864 -17 -


10e1

Standard Terminology Relating to Electrical

Insulating Liquids and Gases

7

175 ASTM F1957 -99(2017)-


99(2011)

Standard Test Method for Composite Foam

Hardness-Durometer Hardness

6

176 ASTM D8071-17 Standard Test Method for Determination of

Hydrocarbon Group Types and Select Hydrocarbon

13

14

and Oxygenate Compounds in Automotive Spark-

Ignition Engine Fuel Using Gas Chromatography

with Vacuum Ultraviolet Absorption Spectroscopy

Detection (GC-VUV)

177 ASTM D6385 -99(2017)


99(2011)

Standard Test Method for Determining Acid-

Extractable Content in Activated Carbon by Ashing

2

178 ASTM D3838 -05(2017)


05(2011)

Standard Test Method for pH of Activated Carbon 3

179 ASTM E1194 -17 -


07

Standard Test Method for Vapor Pressure 5

180 ASTM D5604 -96(2017)


96(2012)

Standard Test Methods for Precipitated Silica—

Surface Area by Single Point B.E.T. Nitrogen

Adsorption

6

181 BS EN 16909:2017 Ambient air. Measurement of elemental carbon

(EC) and organic carbon (OC) collected on filters

60

182 BS EN 15181:2017

Replace: BS EN

15181:2008

Measuring method of the energy consumption of

gas fired ovens

30

183 BS EN 16845-1:2017 Photocatalysis. Anti-soiling chemical activity using

adsorbed organics under solid/solid conditions.

Dyes on porous surfaces

34

184 BS EN 16846-1:2017 Photocatalysis. Measurement of efficiency of

photocatalytic devices used for the elimination of

VOC and odour in indoor air in active mode. Batch

mode test method in closed chamber

24

185 BS EN 14791:2017 -

Replace: BS EN

14791:2005

Stationary source emissions. Determination of

mass concentration of sulphur oxides. Standard

reference method

74

186 BS ISO 16962:2017 Surface chemical analysis. Analysis of zinc- and/or

aluminium-based metallic coatings by glow-

discharge optical-emission spectrometry

52

187 ISO 25947-1:2017 Fireworks — Categories 1, 2 and 3 — Part 1:

Terminology

7


Categories and types

10


Minimum labelling requirements

27

190 ISO 25947-4:2017 Fireworks — Categories 1, 2 and 3 — Part 4: Test

methods

32

15


Requirements for construction and performance

23

192 ISO/TS 19883:2017 Safety of pressure swing adsorption systems for

hydrogen separation and purification

15

193 ISO 15470:2017 Surface chemical analysis -- X-ray photoelectron

spectroscopy -- Description of selected

instrumental performance parameters

5

194 JIS A 9510:2016-


Inorganic porous thermal insulation materials 17

195 JIS K 0301:2016 -


Methods for determination of oxygen in flue gas 28

Phân bón – Thuốc trừ sâu Trở về đầu trang

196 ASTM E2169 -17 -


12

Standard Practice for Selecting Antimicrobial

Pesticides for Use in Water-Miscible Metalworking

Fluids

8

197 ISO 19670:2017 Fertilizers and soil conditioners — Solid urea

aldehyde slow release fertilizer — General

requirements

8

Hạt nhân – Quang học Trở về đầu trang

198 ASTM D8093-16 Standard Guide for Nondestructive Evaluation of

Nuclear Grade Graphite

17

199 ASTM E3084-17 Standard Practice for Characterizing Particle

Irradiations of Materials in Terms of Non-Ionizing

Energy Loss (NIEL)

5

200 ISO 18417:2017 Iodine charcoal sorbents for nuclear facilities —

Method for defining sorption capacity index

19

201 ISO 16331-1:2017 -

Replace: ISO 16331-

1:2012

Optics and optical instruments — Laboratory

procedures for testing surveying and construction

instruments — Part 1: Performance of handheld

laser distance meters

37

202 JIS Z 8724:2015 Methods of colour measurement -- Light-source

colour

41

203 JIS Z 8725:2015-

Replace:JIS Z 8725:1999

Methods for determining distribution temperature

and color temperature or correlated color

temperature of light sources

34

Dầu mỏ - Khoáng sản Trở về đầu trang

204 ISO 13312:2017 -


Iron ores — Determination of potassium — Flame

atomic absorption spectrometric method

13

205 ISO 6246:2017 -

Replace: ISO 6246:1995;

ISO

Petroleum products — Gum content of fuels — Jet

evaporation method

10

http://www.webstore.jsa.or.jp/webstore/Com/FlowControl.jsp?lang=en&bunsyoId=JIS+Z+8724%3A2015&dantaiCd=JIS&status=1&pageNo=0

16

6246:1995/Cor1:1998

206 ISO 8216-1:2017 -


Petroleum products — Fuels (class F) classification

— Part 1: Categories of marine fuels

3

207 ISO 8217:2017 -


Petroleum products — Fuels (class F) —

Specifications of marine fuels

23

Giấy – Dệt - Gỗ Trở về đầu trang

208 BS EN 581-1:2017 -

Replace: BS EN 581-

1:2006

Outdoor furniture. Seating and tables for camping,

domestic and contract use. General safety

requirements

12

209 JIS C 2323-3-4:2016 Non-cellulosic papers for electrical purposes -- Part

3: Specifications for individual materials -- Sheet 4:

Aramid fibre paper containing not more than 50 %

of mica particles

6

210 JIS L 1910:2016 Test methods for percentage of strength lowering

of textiles to oxygen-bleaching

10

Thủy tinh - Gốm sứ Trở về đầu trang

211 ISO 19496-1:2017 Vitreous and porcelain enamels — Terminology —

Part 1: Terms and definitions

27

212 JIS R 1701-1:2016 -

Replace:JIS R 1701-

1:2010

Fine ceramics ( advanced ceramics, advanced

technical ceramics). Test Method for air

purification performance of photocatalytic

materials. Part 1: Removal of nitric oxide

17

213 JIS R 1701-2:2016 -

Replace:JIS R 1701-

2:2008

Fine ceramics (advanced ceramics, advanced

technical ceramics) -- Test method for air


materials -- Part 2: Removal of acetaldehyde

15

214 JIS R 1701-3:2016-

Replace:JIS R 1701-

3:2008




materials -- Part 3: Removal of toluene

11

215 JIS R 1701-4:2016 -

Replace:JIS R 1701-

4:2008




materials -- Part 4: Removal of formaldehyde

12

216 JIS R 1701-5:2016 -

Replace:JIS R 1701-

5:2008




materials -- Part 5: Removal of methyl mercaptan

12

Dầu và mỡ động vật và thực vật Trở về đầu trang

217 ISO 8534:2017 -


Animal and vegetable fats and oils —

Determination of water content — Karl Fischer

method (pyridine free)

10

17

Mỹ phẩm Trở về đầu trang

218 ISO 29621:2017-


Cosmetics — Microbiology — Guidelines for the

risk assessment and identification of

microbiologically low-risk products

11

Thiết bị y tế - Chăm sóc sức khỏe Trở về đầu trang

219 ASTM E2952 -17


14

Standard Specification for Air-Purifying

Respiratory Protective Smoke Escape Devices

(RPED)

25

220 BS EN ISO 7198:2017-

Replace; BS ISO

7198:1998, BS EN

12006-2:1998+A1:2009

Cardiovascular implants and extracorporeal

systems. Vascular prostheses. Tubular vascular

grafts and vascular patches

70

221 BS EN ISO 21298:2017 Health informatics. Functional and structural roles 44

222 BS EN 207:2017 -

Replace: BS EN

207:2009

Personal eye-protection equipment. Filters and eye-

protectors against laser radiation (laser eye-

protectors)

32

223 ISO 18562-1:2017 Biocompatibility evaluation of breathing gas

pathways in healthcare applications — Part 1:

Evaluation and testing within a risk management

process

23


pathways in healthcare applications — Part 2: Tests

for emissions of particulate matter

15



for emissions of volatile organic compounds

(VOCs)

12



for leachables in condensate

9

227 ISO/TR 13154:2017 -

Replace: ISO/TR

13154:2017

Medical electrical equipment — Deployment,

implementation and operational guidelines for

identifying febrile humans using a screening

thermograph

23

Giải trí Trở về đầu trang

228 ISO 11121:2017 -


Recreational diving services – Requirements for

introductory programmes to scuba diving

8

229 ISO 24803:2017 -


Recreational diving services — Requirements for

recreational diving providers

11

Chất lượng đất – Chất thải Trở về đầu trang

230 BS EN 14405:2017 - Characterization of waste. Leaching behaviour test. 46

18

Replace: DD CEN/TS

14405:2004

Up-flow percolation test (under specified

conditions)

231 BS ISO 19204:2017 Soil quality. Procedure for site-specific ecological

risk assessment of soil contamination (soil quality

TRIAD approach)

38

232 ISO 11272:2017 -


Soil quality — Determination of dry bulk density 14

Yêu cầu an toàn Trở về đầu trang

233 BS EN 16830:2017 Safety and control devices for burners and

appliances burning gaseous or liquid fuels. Control

functions in electronic systems. Temperature

Control function

36

234 BS EN 13796-2:2017


2:2005

Safety requirements for cableway installations

designed to carry persons. Carriers. Slipping

resistance tests for grips

12

235 BS EN 13796-3:2017-


3:2005

Safety requirements for cableway installations

designed to carry persons. Carriers. Fatigue testing

16

236 BS EN 61010-2-

101:2017 -Replace: BS

EN 61010-2-101:2002

Safety requirements for electrical equipment for

measurement, control and laboratory use. Particular

requirements for in vitro diagnostic (IVD) medical

equipment

28

Tài liệu hướng dẫn trong sản xuất, kinh doanh Trở về đầu trang

237 BS EN 61987-15:2017 Industrial-process measurement and control. Data

structures and elements in process equipment

catalogues. Lists of properties (LOPs) for level

measuring equipment for electronic data exchange

36

238 ISO/IEC 17021-3:2017 -

Replace: ISO/IEC TS

17021-3:2013

Conformity assessment - Requirements for bodies

providing audit and certification of management

systems - Part 3: Competence requirements for

auditing and certification of quality management

systems

5

239 ISO 14052:2017 Environmental management — Material flow cost

accounting — Guidance for practical

implementation in a supply chain

13

240 ISO 13491-2:2017 -

Replace: ISO 13491-

2:2016

Financial services — Secure cryptographic devices

(retail) — Part 2: Security compliance checklists

for devices used in financial transactions

39

Thử nghiệm – Phép đo Trở về đầu trang

241 BS EN 60695-1-10:2017


1-10:2010

Fire hazard testing. Guidance for assessing the fire

hazard of electrotechnical products. General

guidelines

32

242 BS EN 60695-8-2:2017 Fire hazard testing. Heat release. Summary and 32

19

relevance of test methods

243 ISO 20339:2017 Non-destructive testing — Equipment for eddy

current examination — Array probe characteristics

and verification

22

244 ISO 20484:2017 Non-destructive testing — Leak testing —

Vocabulary

9

245 ISO 20669:2017 Non-destructive testing — Pulsed eddy current

testing of ferromagnetic metallic components

13

246 JIS B 7502:2016 -

Replace:JIS B 7502:1994

Micrometers 44

Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa

học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong

trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông

tin, xin vui lòng liên hệ:

1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện

sau:

+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";

+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;

+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:

[email protected]

2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM

Địa chỉ: 79 Trương Định - Q1 - TP.HCM

ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957

Website: www.cesti.gov.vn Email: [email protected]

Lưu ý

1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.

2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)

Thư viện Trường Đại học Công nghiệp Thành phố Hô Chí Minh.

http://lib.iuh.edu.vn/

http://facebook.com/libiuh

mailto:[email protected]

http://www.cesti.gov.vn/

mailto:[email protected]

tiÊu chuẨn mỚi thÁng 03/2017lib.iuh.edu.vn/wp-content/uploads/2017/08/bantin_tieu...quy...

Documents