titan r50 wagon leaflet
DESCRIPTION
Loading and Discharge Wagons6/50 GL • R/50 GL • 6/54 GL • R/54 GL6/44 GD • R/48 GDENKRONE – enjoying more than 100 successful yearsThe name KRONE has been an icon in agricultural technology for the past century now. Starting out as aInnovativeCompetentsmall blacksmithing company, Krone has developed into a leading forage crop specialist. The right combination of ingenuity, proximity to customers and competence is responsible for the company’s long lasting success. Numerous innovatTRANSCRIPT
� � �
� � � � � �6/50 GL • R/50 GL • 6/54 GL • R/54 GL 6/44 GD • R/48 GD
EN
Loading and Discharge Wagons
2
Discussions are the start point with
KRONE employees in close contact with
customers and distribution partners.
Together, with these contacts, they analy-
se markets, trends and machine specifica-
tions.
With the aid of the most up-to-date com-
puter technology, new machines are crea-
ted and thanks to innovative design pro-
grammes, machine operation can even be
simulated on the monitor and so this alrea-
dy helps optimise the machine during the
construction phase.
Then starts the construction process
where experienced technicians manufac-
ture the first prototypes by hand. In close
cooperation with the design engineers all
components are carefully assembled into
a new KRONE machine.
KRONE – enjoying more than 100 successful years
The name KRONE has been an icon in agricultural
technology for the past century now. Starting out as a
small blacksmithing company, Krone has developed into a
leading forage crop specialist. The right combination of
ingenuity, proximity to customers and competence is
responsible for the company’s long lasting success.
Numerous innovative unique selling point characteristics
are a powerful testimonial to this quality and customer-
orientated corporate philosophy.
Competent
Innovative
Local presence
3
• • •
No computer simulation can fully replace
practical working therefore Krone puts its
new machines through their paces all over
the world and under all conditions. Only in
this way is it assured that the arduous
testing has covered the complete spec-
trum of the machine’s field of operation.
Quality pays for itself. For this reason, we
check and document everything whenever
possible. Moreover, Krone even has its
products checked again by independent
inspection and testing agencies that arbi-
trarily put machines from current producti-
on under the magnifying glass.
Satisfied customers across the world will
testify that this effort is worth while.
Continuous dialogue and uninterrupted
quality control certainly pay off and it isn’t
for nothing that, in the meantime, the
name of Krone stands out across the
world for outstanding forage harvesting
technology – Made in Spelle.
Recognising early trends, maintaining
a close dialogue with customers and
always reacting in a trend-setting
manner in the market are all compe-
tencies that characterise KRONE.
Take for example the loading wagon:
in this case KRONE have been
renowned for robust wagons from the
very beginning and these have been
proven and tested even in the most
arduous of conditions. KRONE can
look back on a forty-year, successful
history in loading wagon constructi-
on. With a cutting and feed drum with
initially 19 knives, KRONE met the
requirements of practical farming
even back in 1975. This is what distin-
guishes the KRONE philosophy: liste-
ning very carefully to the market’s
demands, and integrating these
demands into machinery in a quick
and innovative manner.
� � �
� � �
� � �
� � �
� � �
� � �
� � �
� � �
High-Performance Cam Feed:Six feeder rakes – cam-driven
EasyFlow:the first cam-trackless pick-up in forage wagons
Cutting and Feeder Rotor:continuous flow
Chopping System:scissor cut principle with 35 knives
Design:robust large capacity
Loading Wagon:volume galore
Discharge Wagon:perfectly unloaded
Running gear:safe on the road
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
6
8
10
12
14
16
18
20
With the new EasyFlow pick-up,
KRONE is the first manufacturer to offer a
cam-trackless pick-up for loading wagons.
Six cam-driven feeder rakes with double tines
arranged in a wave-shaped arrangement,
have a high throughput capacity, are smooth
running and above all, gentle on the forage.
This will get you going. The large
dimensioned cutting and feeder rotor offers
exceptional cutting quality and throughput
capacity.
An exact short cut with all the knives
on the one level giving a theoretical chop
length of 40 mm with all 35 knives.
With loading volumes of about 50 to 54 m3
for dry crops of medium compaction the
models Titan 6/50 GL, R/50 GL, 6/54 GL and
R/54 GL loading wagons fit the bill.
The Titan 6/44 GD and R/48 GD large
capacity discharge wagons come with up to
three discharge rotors to meet any require-
ments made in practice in an exemplary
manner.
When high road speeds with high loads are
required, axle units are needed with high load
capacity that can cope with any application
situation.
When much needs to be loaded, a robust,
high-quality design construction
is needed.
6
Clean pick-up: with six rows of tines and a
tine distance of 55 mm, the EasyFlow
picks up the crop in an exceptionally clean
manner. Because the tines are lowered at
the right angle to the wave-shaped bands
no bits of crop are drawn into the pick-up.
Robust drive: the drive of the pick-up is
handled via a robust chain drive that is
equipped with a star ratchet gear as over-
load protection. This provides safety, even
in the case of sudden contact with foreign
obstacles.
KRONE knows what is needed in practice:
the pneumatic pendulum guide wheels are
height adjustable without the use of any
tools making for a quick adjustment to any
conditions. They follow all the humps and
hollows and have no scrubbing effect.
Cleaner pick-up
More output
Higher balance
Lower wear
Less maintenance
EasyFlow.The first cam-trackless pick-up in a loading wagon.
With the new EasyFlow pick-up, KRONE offers, for the
first time, a cam-trackless pick-up, that is completely
un-steered. The most amazing feature of this pick-up is
the wave-shaped design of the galvanized bands in
between the tines that creates a continuous
crop flow off the tines. EasyFlow can
operate at higher speeds, enabling
one to drive faster and giving an
increased throughput.
• • •
7
Contaminated forage? No thank you!
Additional rear guide wheels are available
as optional equipment. These wheels do
not run in the tractor track and the prede-
termined working height will always be
maintained since undulating wheel marks
and soft ground can be travelled over
without problem.
Clean design: the pendulum suspended
pick-up has a working width of 1,800 mm
(in accordance with DIN 11200) and fol-
lows any ground contour. The roller crop
guide always ensures continuous product
flow.
Nothing is pushed down: the large-scale
loading and discharge wagons are equip-
ped with a standard equipment hydraulic
lifting drawbar. With a double-acting
hydraulic cylinder and a ground clearance
of up to 75 cm, any potential silage clamp
clearance problems are therefore avoided.
The advantages are obvious: the new
EasyFlow pick-up has noticeably less
moving parts due to its simple design
and convincing balance with the
resulting decreased wear and tear
reflected in lower maintenance and
service costs. Compared to traditio-
nal systems, EasyFlow operates at
about a 30% higher speed and the
“discharge effect” on the following
feeder system obtained improves the
intake capacity, increasing yet further
the wagon’s output.
The seemingly impossible has always been a challenge to the engineers at KRONE. As
the pioneering manufacturer, KRONE can boast that it now provides a self-steered pick-
up for Titan loading wagons as standard equipment.
8
Strong, balanced, and smooth running:
the KRONE high-performance cutting and
feeder unit with six cam-driven feeder
rakes caps torque peaks and is gentle on
the forage.
The feeder rakes are arranged offset to
one another guarantee even flow of forage
and this means the highest throughputs at
yet the lowest demand on power.
For continuous flow: the double tines are
arranged on the feeder rake in a wave-
shaped fashion. Here, the cutting is done
successively, which saves energy.
Six feeder rakes – lowdemand on tractor power
Cam-driven –maximum balance
Tines arranged in a wave shape – continuousproduct flow
1.5” drive chain –robust for maximum power
High-Performance Cam Feed.Six feeder rakes – cam-driven.
The high-performance cam-driven feeders with six rakes
and double tines that are arranged in a wave shape
utilises little power, but continuously works and feeds the
crop gently into the loading area,
which is ideal for the daily
intake of fresh forage.
Depending on the type of
wagon and shape of terrain,
this cam-feed system can be driven
with tractors of around 90 PS.
• • •
9
Cam-driven: the six feeder rakes are con-
trolled via the cam. The cam control is
astounding with its perfect balance and
durability.
Robust: the 1.5” thick chain drives the
high-performance feeder cams. This chain
can withstand even the highest of
demands.
Standard equipment: the automatic chain
lubricator for the high-performance feeder
drive and the cam-trackless EasyFlow
pick-up.
Strong, balanced, and quiet: the
KRONE high-performance cutting
and feeder unit with six cam-driven
feeder rakes and a row of knives with
up to 35 knives. The forage is conti-
nuously drawn over the row of knives,
slice by slice.
10
The cutting and feeder rotor: simple design, few moving parts and low maintenance. With
a diameter of 880 mm, a width of 1470 mm, six tine rows and the 10 mm thick, spirally
arranged tines, the cutting and feeder rotor in a Titan rotor wagon maximises its extreme-
ly high load capacity.
Non-aggressive tines that are chamfered
towards the rear: they pull out of the crop
at an angle that is gentle on the forage and
does not crush the cut product against the
scrapers.
Maximum loadingthroughputs
Minimal power requirement
Well balanced
Large diameter, 880 mm
Few components
Low in maintenance
Cutting and Feeder Rotor.Continuous flow.
The cutting and feeder rotor is the result of decades
of experience in loading wagon construction. Due to
the enormous intake capacity, the high degree of
consolidation and the simple design, KRONE’s cutting
and feeder rotor has been proven
as the specialist in silage. The
low power requirement stands
out where, depending on the
model and application conditions,
the Titan rotor wagons can be
used with tractors from as little
as approximately 125 PS.
• • •
11
Getting more in: the position of the rotor,
the feeder channel design and the spiral
arrangement of the tines on the rotor all
help ensure the most efficient filling of the
load area.
Strong 1.5” links: the drive chain to the
cutting and feeder rotor of the Titan with-
stands even the highest of demands and
minimises the demand on power.
Comfortable: automatic chain lubrication
of the chain drives to the cutting and fee-
der rotor and the cam-less EasyFlow pick
up is, of course, standard equipment.
Even flow: the six rows of 10 mm
thick tines are arranged on the feeder
drum in a spiral formation and pull the
crop through the knives in succession
meaning that one of the knives is
always in use. This arrangement and
the profile of the tines and knives is
how Krone achieves such a low
demand on power and yet an efficient
quality of chop.
12
The draw cut – energy saving: the Titan
knives cut over their entire length. This
maximises the balance of the feeder unit
and caps load peaks. The serrated edge
ensures a constant sharpness over a lon-
ger period of time.
Cutting as if using scissors: the distance
between the knives and the feeder tines of
the rotor is very small so that the crop can-
not escape the knives. The result: perfect
chop quality through and through!
Safety first: individual knife control via a
trip spring ensures good longevity of the
knives when picking up foreign objects. It
goes without saying that the knives swing
automatically back into their original posi-
tion after a foreign body has passed
through.
35 knives with a 40 mm theoretical chop length
Scissor cut
Individual knife protection
Knife change without tools and with central kniferelease
Central knife controlFor 0, 17, 18, and 35 knives
Hydraulic knife-out control
The cutting system.Chopping system with scissor cut.
Razor-sharp construction: a maximum of 35 knives in one
bank and a theoretical chop length of 40 mm stand for the
perfect short cut but above all the great ease of use is
amazing. Knife assembly and disassembly without tools is
simple and quick and when the knives are released on the
KRONE loading wagon, all the individual knife protection
springs are simultaneously released. The central knife
control means more flexibility as the desired chop length
can be quickly set.
• • •
13
Chopping with a knife spacing of 40 mm
or 80 mm: this is simple! Without having to
remove or replace knives a choice of 0, 17,
18, or 35 knives can be controlled via the
central knife control. in the case of poten-
tial forage blockages the knife bar can be
swung in and out hydraulically.
Simple, quick and without tools: Without
having to remove or replace knives a choi-
ce of 0, 17, 18, or 35 knives can be con-
trolled via the central knife control.
The cutting system for the high-perfor-
mance feeder rakes: 35 large and small
knives. All positioned in one row. They
ensure a high cutting frequency and a
continuous crop flow as well as a uniform
loading power without any power peaks.
The cutting system can be swung
well down for inserting knives or
removal without tools. Everything can
be easily overseen with plenty of
room for working on the chopping
system. Years of experience in loa-
ding wagon construction have shown
that the chop quality is best with only
one bank of knives. Compared to two
banks of knives arranged on top of
each other, where the forage can turn
end on, deviations from the predeter-
mined, theoretical chop length are
lower. The narrow distance between
the feeder tines and the knives produ-
ces a shear-like, exact cut and thus a
premium forage obtained. Any quan-
tity of over-sized lengths means redu-
ced silage quality.
14
The robust frame is designed for hard
work: the frame side supports, made from
C-profile steel have a deep profile of
200 mm. This ensures the highest of rigi-
dity and longevity.
Clean design: the Titan 6/50 GL and 6/44
GD include a sliding canvas cover, all
others a sliding sheet. The crop cannot be
trapped or escape, but is reliably fed
backwards.
No matter how heavy the forage: the
hydraulic floor conveyor drive handles
large amounts of crop with the conveyor
feed rate being variably adjustable.
Robust, deep C-profileframe
Hot-dip galvanised, vertical side walls
High loading volumes of up to 54 m 3
Split floor conveyor for Titan R
Automatic floor conveyorchain tensioner
Design. robust, large capacity.
Who hasn’t experienced it: wet, heavy wilted product,
long hauling distances, full loads and working under enor-
mous time pressure? These are the hard conditions in
practice that make especially high demands on loading
wagons that must perform at their peak during the few
available field working days in a year.
For this reason, KRONE has equiped
the Titan models with particularly
robust frames and components.
KRONE knows that high longevity
will pay for itself over the years.
• • •
15
Automatically tensioned: the floor convey-
or is fitted with a fully automatic chain ten-
sioning system that, not only reduces
maintenance and inspection times, but
also avoids the time-consuming readjust-
ment of the floor chains by hand.
The floor conveyor on the Titan 6/44 GD,
6/50 GL and 6/54 GL: two highly hardened
and tempered, short-linked chains with a
diameter of 10 mm, and robust U-profiled
conveyor bars ensure problem-free con-
veying.
The Titan R/48 GD, R/50 GL and R/54 GL
comes as standard with a split floor con-
veyor with four highly hardened and tem-
pered short-linked chains (10 mm diame-
ter) makes sure the crop is moved quickly
and evenly. Even the unloading operation
is handled swiftly and painlessly.
High-performance makes quality, rigi-
dity and hiccup-free operation a pre-
requisite. The KRONE Titan high volu-
me loading and discharge wagons
with 200 mm strong C-profile frames
are designed for that most arduous
work. The construction of the ‘up top’
components with straight side walls
and powerful hydraulic motors that
drive the tough floor conveyors stand
for quick and downtime-free harve-
sting. With this loading wagon, output
will be increased and yet will be wor-
king still well within its capabilities.
16
Clearly arranged and functional: the clear-
ly laid out in-cab console of the electroma-
gnetic standard control. Functions, such
as actuating of the drawbar lift, drive to the
floor conveyor, pick-up up and down, the
knife bar and the tailgate control can be
comfortably pre-selected from it.
At one glance: the optional Comfort elec-
tromagnetic control with LCD display on
the GL models comprises of load counter
and additionally provides the driver with a
host of useful information. The speed of
the floor conveyor can be varied with the
potentiometer on the terminal. The
Comfort hydraulics are capable of load-
sensing.
Tidy: individual hydraulic functions are
controlled via electromagnetic valves.
They are clearly laid out at the front of the
wagon behind a pivoting protective cover
and can, in case of electronic failure, be
operated manually.
Six cam-driven feeder rakesor cutting and feeder rotor
Robust all steel construction
Split floor conveyor with four chains for the R/50 GL and R/54 GL
Automatic floor conveyorstop control
Simple operation
Titan 6/50 GL-6/54 GL – R/50GL- R/54GL loading wagons volume galore.
Titan loading wagons with their all steel construction are
available with load capacities of up to 54 m3 of dry crop in
medium compaction. The Titan 6/50 GL and 6/54 GL are
equipped with a cam-driven feed rotor whereas
the R/50 GL and R/54 GL are equipped with
a cutting and feeder rotor.
High-quality workmanship
and with first-class equipment
come as standard, and they
are so easy to use.
• • •
17
Safety included: the KRONE loading
wagons have an automatic floor conveyor
stop device. If the forage pushes against
the tailgate, the feed is stopped by means
of a pushbutton sensor thus preventing
any damage to the tailgate.
Robust through and through: The perfora-
ted mesh of the rear tailgate provides rigi-
dity and ensures transport free of loss. The
lighting system is integrated into the rear
door, thus preventing contact with the
crop during unloading.
Room for masses: in order to be able to
unload the wagon quickly at full feed out,
a large opening is required. Two hydraulic
cylinders lift the tailgate wide open and as
the door is opened it automatically
unlocks to be locked again on closing.
Clean work: the Titan large-scale loa-
ding wagons are true specialists.
Even at high load performance, these
wagons leave nothing behind with the
cam-trackless EasyFlow pick-up.
With a collecting width of 1.80 m (in
accordance with DIN 11200) they will
handle even wide swaths. The hot-dip
galvanised, plastic coated all steel
construction and tensioning cables,
guarantee the transport of valuable,
farm-produced forage loss-free from
the field to the silo. The GL models
are outstanding with their load volu-
mes and quick unloading times.
18
Comfort: the electronic comfort control with LCD
display on the Titan 6/44 GD and R/48 GD
comes as standard equipment. With it, the loa-
ding and unloading process can be controlled,
diagnostics can be performed, and the areas
cleared can be recalled. One remains up to date
with the information shown on the display and
that includes alarm messages that are also
transmitted.
Simple, practical, and safe: the side
access hatch with fold-down step ladder
for comfortable access to the loading area
on GD models is located in the centre of
the wagon.
Direct: drive to the discharge rotors is
taken directly via an enclosed shaft from
the main gearbox at the wagon front to the
lower discharge rotor. The simple design
with fewer drive chains and PTO shafts
guarantees transmission of power and
ease of maintenance.
Six cam-driven feeder rakesor cutting and feeder rotor
Two or three discharge rotors
Strong direct dischargerotor drive
Split floor conveyor with 4 chains for the R/48 GD
Comfort controls as standard equipment
Automatic floor conveyorend stop control
Titan 6/44 GD and R/48 GD discharge wagons.perfectly unloaded
The GD in the KRONE model title stands for large-scale
discharge wagons. These high-performance discharge
wagons will easily meet any practical requirements.
Up to three discharge rotors ensure even forage
discharge and in the lowest unloading time.
An even spread of forage over
the drive-through silage clamp
provides the best conditions
for quality silage.
• • •
19
Everything rotating: the robust roller
chains withstand even the toughest loads.
Spring-loaded chain tensioners reduce the
need for maintenance and increase the life
of the chains.
With automatic floor conveyor stop con-
trol: with a full wagon, the lower discharge
rotor is displaced toward the rear by the
forage and the feed to the floor conveyor
is stopped by means of a movement sen-
sor. The discharge rotors can then start an
error-free unloading process.
For even forage discharge: two, or optio-
nally three discharge rotors. The tines
arranged in a V shape ensure a continuous
flow and a quick unloading. The one-piece
vertical side walls prevent any bridging.
A quality silage requires optimum
forage distribution during the drive-
through silage operation. These large-
scale discharge wagons with enclo-
sed and galvanised discharge rotors
fully meet these challenges. An even
carpet of forage is unloaded across
the entire length of the silage clamp
layer after layer, which is ideal for the
subsequent rolling process as any air
pockets in the clamp will cause redu-
ced quality in the forage. Thanks to
the automatic floor conveyor stop
control, which is integrated into the
lower discharge rotor, the rotors are
guaranteed to start the unloading
process every time, while at the
clamp everything is under total con-
trol using the operator terminal.
Absolutely even: the Titan 6/44 GD and R/48 GD are astonishing in performance and offer
the best conditions for a perfect consolidation of the wilted crop.
20
Four-wheel braked portal tandem axle
with automatic reversing and 500/50-17
tyres: standard equipment for the Titan
6/44 GD, 6/50 GL and R/50 GL. This axle
is perfectly suitable for negotiating a drive-
through silo because of plenty of ground
clearance and a good climbing ability.
With trailing links: the trailing link tandem
axle unit with twin leaf parabolic spring
and balance is standard equipment on the
Titan R/48 GD, 6/54 GL and R/54 GL. The
rigid link between the chassis and the
axles ensure the best possible axle beha-
viour. The axle unit can be equipped with
tyres from 500/50-17 to 620/40 R 22.5.
Bogey unit with triple leaf parabolic
springs as a balanced rocker: the large
pendulum travel results in a uniform load
distribution on the front and rear axles in
cases of unevenness. Due to the low
lying centre of rotation for the spring
suspension, the wagon is easier to pull
onto a drive-through silage clamp. This
axle is available with 500/55-20 or
620/40 R 22.5 tyres.
Tandem axle units for largeloading capacities
Portal tandemaxle with auto-matic reversing operation
Trailing link axle with track-following steering
Self-steering bogey axle
Tyres of up to 22.5”
Running gear:Safe on the Road.
When speed on the road with a high total weight is
demanded, axle units are required, which can withstand
these high loads in any application situation. For this
reason all large volume Titan loading and discharge
wagons have a tandem axle. Depending on permissible
total weight and special requirements in practice, one may
choose between a portal tandem axle, a training link
tandem axle unit, and a bogey axle. In this manner you
can be sure that the wagon is optimally equipped for
every application and can handle the work perfectly.
• • •
21
Trailing: The rear axle of the bogey unit fol-
lows around any bend without scrubbing.
The special steering control of the axle
arms ensures weight-dependent centring
forces on the wheels and this means
straight-line stability even when driving at
high speeds.
When reversing: a hydraulic cylinder ser-
ves to lock off the track-following axle in
the centre position making the wagon
more easily manoeuvred. The locking
system also provides safety during unloa-
ding at the edge of a drive-over silage
clamp.
Selection of tyres: depending on the axle,
the wagons are available with tyres from
500/50-17 14 PR to 620/40 R22.5. The
22.5” wide tyres are gentle on the sward
leaving hardly any wheel marks.
High driving speeds and load capaci-
ties, working in hillside situations and
on land barely able to carry any load,
as well as maintaining and protecting
the valuable sward, play a major role
in the selection of a tandem axle unit.
The tandem axles by KRONE are spe-
cialists: The portal tandem unit is out-
standing in performance with the
inter-connected linkage between the
front and rear axles whereas the
bogey unit has excellent contour fol-
lowing. Bogey and trailing link tan-
dem axles have compressed air bra-
king systems and all axle units are
designed for speeds of 40 km/h. Safe road transport and excellent driving comfort: the axle units of the large-scale loa-
ding and discharge wagons are solid and robust and offer a multitude of tyre options.
� � �
22
Optional Equipment
Automatic loading: when the front area
of the wagon is fully loaded, the floor con-
veyor automatically pushes the crop furt-
her towards the rear.
Third discharge rotor: the Titan 6/44 GD
and R/48 GD discharge wagons can addi-
tionally be equipped with a third dischar-
ge rotor. The third rotor ensures a more
even, uniform distribution of the forage.
Side discharge belt: The hydraulically
driven side discharge belt moves the fora-
ge evenly and uniformly into the feed pas-
sage on either side. The discharge directi-
on can be controlled via the control termi-
nal of the comfort control terminal. When
the discharge belt is not required it can be
easily and quickly pushed under the rear
of the wagon for storage.
Drawbar ball-coupling: drive in comfort
due to the jolt-free movement in the con-
nection between tractor and machine. The
ball-coupling is also extremely safe and
offers excellent wear resistance.
Drawbar suspension: is synonymous
with a smooth and comfortable driving
behaviour. Impacts on the tractor are
absorbed by the nitrogen accumulator via
the hydraulic cylinders of the lifting draw-
bar.
Additional guide wheels: running behind
the pick-up away from the tractor wheel
marks the improved height control will
quickly pay for itself, especially on soft,
easily rutted ground or where wheel marks
prevail as they help keep the harvested
crop clean.
� � �
23
Technical data
Service is our first priority at KRONE.
Our distribution partners are trained and
briefed on any new information, mainten-
ance and service issues on a regular basis.
The KRONE international training team
also visits major customers all over the
world. Everybody knows it, nobody needs
it: the crop harvesting chain is at a stand-
still and now every minute is important.
KRONE realises this and operates a total
worldwide spare parts supply chain. Every
sales partner is supplied with spare parts
within hours and you are back in the field,
as KRONE always puts service first.
Original spare parts are less expensive,
because proven quality pays for itself.
Who hasn't tried it before? Sometimes one
is tempted and ostensibly good quality is
available from the spare parts dealer round
the corner but unfortunately on many
occasions it has not worked. Many reports
in professional journals have proven that
quality parts tested by the manufacturer
last longer and function more safely. Do
not compromise. Trust KRONE original
spare parts.
MODEL 6/50 GL R/50 GL 6/54 GL R/54 GL 6/44 GD R/48 GDLength mm 7985 7985 8735 8735 8469 9219
Width mm 2536 2536 2536 2536 2520 2520
Height mm 3730 (3680*) 3730 (3680*) 3580 3580 3730 (3630*) 3580
Height folded down mm 2950 2950 2950 2950 3000** 2950**
Platform height mm 1280 1280 1280 1280 1280 1280
Volume m3 50 50 54 54 44 48
(dry crop)
DIN Volume m3 26,5 26,5 29 29 25,3 28
(DIN 11741)
Tyre options 500/50-17 500/50-17 500/50-17 500/50-17 500/50-17 500/50-17
620/40-22,5 620/40-22,5 620/40-22,5 620/40-22,5 620/40-22,5 620/40-22,5
Pick-up width mm 1800 1800 1800 1800 1800 1800
Chop length with:
18 knives mm 80 80 80 80 80 80
35 knives mm 40 40 40 40 40 40
Permissible total weight kg 8.000 8.000 14.500 14.500 8.000 14.500
(14.500 o.15.500)*** (14.500 o.15.500)*** (15.500)*** (15.500)*** (14.500 o.15.500)*** (15.500)***
Discharge rotors – – – – 2, as option 3 2, as option 3
Permissible load kg 1.500 1.500 1.500 1.500 1.500
Power requirement kW(HP) 66 (90) 88 (120) 73 (100) 92 (125) 66 (90) 92 (125)
PTO speed 1/min 540 540 540 1000 540 1000
* Erected height of the additional folding frame on request
** Possible only with two discharge rotors as standard equipment
***Depending on axle version
www.krone.de
� � �
Maschinenfabrik Bernard KRONE GmbH
Heinrich-Krone-Straße 10, D-48480 Spelle
Postfach 1163, D-48478 Spelle
Telephone: +49(0)5977/935-0
Telefax: +49(0)5977/935-339
Your distribution partner
The KRONE forage harvesting machinery range
Mowers and mower conditioners
KW rotary tedders
SWADRO rotary rakes
Loading/forage wagons
ZX dual-purpose loading wagon
Round balers
Combi Pack balers/wrappers
BiG Pack big balers
BiG M self-propelled high performance
mower conditioners
BiG X precision chop forage harvesters
Rights reserved to make technical changes.
Illustrations are shown in part with optional
equipment.
Hay & Forage Technology
Titan (
EN
) ·
10/0
6
· 0
710-2
112