Timber Pontoon with Concrete

Floats

www.topmarine.eu www.topmarine.eu

L

W

L

WTimber Pontoon with Concrete Floats

END CONNECTION T-CONNECTION L-CONNECTION

L

W

L

W

SIDE CONNECTION

3D FIXING SET- Robust hot dip galvanized fixing

set connects concrete floats and timber deck into one;

- Designed to withstand bending and twisting loads.

CHAIN MOORING SYSTEM- Robust chain fixing set hot dip galvanized.

SAFETY EQUIPMENT- SOS Pedestal;- Safety Ladder.

SERVICE PEDESTAL- Electricity supply for boats;- Water supply for boats;- Lighting for the floating pontoon.

MOORING EQUIPMENT- T-bollard mooring;- Mooring ring.

PILE MOORING SYSTEM- An alternative solution for chain

mooring;- Has been designed for piles

Ø300-400 mm;- The design pile load is 20 kN;- Large and robust construction;- Flexible rubber joints.

GANGWAY- Metal gangway;- Timber gangway.

BOAT BOOMS- Boat Booms

with rubber or hinge connection;

- With or without timber decking.

FENDER- Protects mooring fingers or

timber pontoons against impacts (colour: white).

TIMBER DECKING - Planed anti-slip

blanks 28x120 mm;- Strength C16

according to EN 338 standard;

- Impregnated (vacuum pressure method) softwood decking, class: HC4.

TIMBER FRAME- Double sided planed

timber beam 70x195 mm;

- Strength C24 according to EN 338 standard;

- Impregnated (vacuum pressure method), class: HC4.

- Built to required length without visible joints;

- All bolts and fittings are hot dip galvanized.

SERVICE DUCTS AND CABLE TRAY- Internal, not visible;- Can be installed on both sides or in the

middle.

CONCRETE FLOATS- Hydrotechnical fiber reinforced

concrete C40/50: watertight W6, environmental class XS2, frost resistance XF4 and KK4;

- Reinforcement 6mm fully hot dip galvanized C4 according to ISO 1461 standard;

- Expanded polystyrene: density 19 kg/m³, strenght ≥100 kPa, water absorption ≤3%.

MOORING FINGER- Mooring Fingers with

rubber connection.

Tule 21, Saue 76505 ESTONIAinfo@topmarine.eewww.topmarine.eu

Top MarinePh +372 5304 4000Fax +372 656 0520

Representative:

Timber Pontoon with Concrete Floats

Technical Data of the Timber Pontoon with Concrete Floats

Timber Pontoon Good stability, suitable for year-round use

Intended useAs landing stages, for floating platforms, for floating houses and for other on sea structures

Connection options End connection, side connection, L-connection, T-connection

Structural designHydrotechnical fiber reinforced concrete with EPS inside floats, impregnated softwood timber decking, built to required length without visible joints

Mooring system Mooring by chain or elastic rope. Mooring by piles

AccessoriesMooring rings, mooring bollards, mooring fingers, boat booms, fenders, service ducts, safety equipment, swim ladders

Technical data of pontoon

Item code 03 10 00 03 20 00 03 30 00

Dimensions of pontoons (m)

W 2.4 3.2 2.4

L 12.0 12.0 8.0

H 1.0 1.0 1.0

Number of floats (pc) 2 3 2

Freeboard (m) 0.644 0.657 0.515

Weight of the pontoon (kg) 5200 7507 3008

Designed load capacities (kN/m²) 1.85 2.16 0.76

Allowed max wave height 0.3 m

Allowed perpendicular velocity 1 m/sec

Allowev icing/ freezing No ice movement allowed

Mooring systems

Chain Ø16 mm

Concrete anchors 1000 kg

Pile Ø300...400 mm, 20 kN

Boat mooringMooring buoys, Boat booms, Mooring fingers, Mooring

rings, Mooring bollards

Max boat dimensions Boat max length 12.2m (40 feet)

Technical data of concrete float

Item code 03 70 00 03 70 00 03 50 00

Dimensions of concrete floats (m)

W 2.38 3.12 2.38

L 3.12 2.38 1.32

H 0.71 0.71 0.71

Weight of float (kg) 2009 2009 1098

Designed load capacities of float (kN) 32.5 32.5 11.3

Revision date 1 January 2016

Top Marine is a continuously developing firm and may at its sole discretion revise or amend this product catalogue without further notice.