timber construction research group -upm
TRANSCRIPT
1June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Timber ConstructionResearch Group - UPM
Construcción con MaderaGrupo de Investigación - UPM
http://www2.montes.upm.es/Dptos/DptoConstruccion/cestruct/
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
J. Ramón Aira Zunzunegui – Forest Engineer, PhD student
Ramón Argüelles Álvarez - Forest Engineer, PhD.
Ramón Argüelles Bustillo - Industrial Engineer, PhD.
Francisco Arriaga Martitegui - Architect, PhD. / (Team Leader)
Ignacio Bobadilla Maldonado - Forest Engineer, PhD.
Miguel Esteban Herrero - Forest Engineer, PhD.
José Luis Fernández Cabo – Architect, PhD. - UPM
Daniel Fernández Llana – Agricultural Engineer, PhD student
Guillermo Íñiguez González - Forest Engineer, PhD.
Roberto Martínez López – Forest Engineer
Rafael Díez Barra - Biological Sciences, PhD
Eva Hermoso Prieto - Forest Engineer, PhD.
Manuel Guaita Fernández - Agricultural Engineer, PhD.
Manuel Touza Vázquez - Forest Engineer, PhD.
Raquel Mateo Campos - Forest Engineer
2June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Main Research Lines
1. Structural use of timber;
2. Non Destructive Testing of timber;
3. Structural design software development;
4. Inspection and evaluation of timber structures;
5. Pathology of timber structures.
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
1. Structural use of timber
- Timber and timber products characterization - Standardization works;
- FEM analysis of the strength loss due to the presence of knots;
- Analysis of timber joints by FEM analysis;
- Analysis of the effect of wanes and fissures on the bending strength.
Fmax=8,4 kN Fmax =7,9 kN
Experimental testNumerical simulation by F.E.M.
3June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
2. Non Destructive Testing of timber
- Portable equipment: stress wave, vibration analysis, resistance
drilling, penetration depth, screw withdrawal force measurements, etc.
- Assessment of physical and mechanical properties by means of non
destructive techniques. In situ and laboratory tests;
- Statistical models for Spanish species;
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Estrumad: program for design of 2D and 3D timber frame structures according
to CTE (Spanish Building Code) and Eurocode 5 (EC5)
3. Software development
4June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Metalpla: program for design of 2D and 3D steel frame structures according to
CTE (Spanish Building Code) and Eurocode 3 (EC3)
3. Software development
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
4. Inspection and assessment of old timber structures
- Evaluation of load carrying capacity of existing timber structures;
- Reinforcements of timber elements;
- In situ proof loading.
5June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Reinforcing
- Research works for strengthening and repairing timber pieces with
bonded plates of GFRP.
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Reinforcing
-
FEM
LABORATORY TEST
DESIGN
- Research works for strengthening and repairing timber pieces with steel
members. FEM analysis and experimental tests
6June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
5. Pathology of timber structures
- Wood destroying insects identification in timber elements by means of
the detritus morphologic analysis.
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Practical works
Analysis and reinforcement of a historical roof structure
7June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Practical works
Structural design of pedestrian timber bridge
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Practical works
Structural assessment of old timber structures
8June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Practical works
Structural design of support for stork nests
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Research Projects
- Public funding research projects (last 5 years):
-CICYT. 2011-2013. Non destructive techniques applied to structural grading of timber in new
and rehabilitation works. BIA 2010 - 18858.
- AGL 2009-11331. 2010-2012. Methodology for design and testing of carpenter joints in timber
structures and the influence of knots in load carrying capacity.
-Dirección Xeral de I+D de la Xunta de Galicia. 2009-2012. Mechanical properties of Chesnut
timber and numerical analysis.
- CICYT. 2007-2009. Effect of checks, wanes and other defects in the mechanical properties of
large section structural timber. BIA 2006 - 14272.
9June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Dissemination of results
- Conferences Papers (2010-2014): 16 papers and posters
- World Conference on Timber Engineering;
- International Symposium on Nondestructive Testing;
- International Conference on Wooden cultural heritage;
- Congreso Forestal Mundial;
- Congreso Forestal Español.
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Dissemination of results
- SCI Papers (2010-2014): 18 papers
González-Bravo, C., Arriaga-Martitegui, F., Maldonado-Ramos, L y Díez-Barra, R. (2010)Refuerzo de vigas de madera mediante perfiles metálicos situados en la cara superior. Bending reinforcement of timber beams with steel cross sections on the upper face.Materiales de Construcción (mater construcc). Vol. 60, 298, 123-135. Abril-junio 2010. DOI: 10.3989/mc.2010.47408
Esteban, M., Arriaga, F., Íñiguez, G., Bobadilla, I. y Mateo, R. (2010)Influencia de las fendas en la resistencia de la madera estructural.The effect of fissures on the strength of structural timber.Materiales de Construcción. Mater. Construcc., Vol. 60, 299, 115-132, jul.-sept.doi: 10.3989/mc.2010.48208
González-Bravo, C., Arriaga-Martitegui, F., Íñiguez-González, G. y Maldonado-Ramos, L. (2011)Prótesis metálicas para la reparación de cabezas de vigas de madera degradadas. Steel profiles for repairing deteriorated timber beam ends.Informes de la Construcción. Vol. 63, 521, pp. 37-45 2011.
Baño, V., Arriaga, F., Soilán, A. and Guaita, M. (2011)Prediction of bending load capacity of timber beams by finite element method simulation of knots and grain deviationBiosystems Engineering (Biosyst. Eng). Vol. 109 pp. 241-249. DOI: 10.1016/j.biosystemseng.2011.05.008.
10June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Dissemination of results
- SCI Papers (2010-2014): 18 papers
Rodriguez, I., Martinez., R., Capuz. R., Díez, R., García. F. (2011).Estudio de la variación del contenido de humedad en el Pinus pinaster Ait. por medio de la técnica no destructiva del georradar. Materiales de Construcción, Vol. 61
Baño, V., Arriaga, F., Soilán, A. and Guaita, M. (2011)Prediction of bending load capacity of timber beams by finite element method simulation of knots and grain deviationBiosystems Engineering (Biosyst. Eng). Vol. 109 pp. 241-249. Factor de impacto: 0,983 (2010). DOI: 10.1016/j.biosystemseng.2011.05.008.Categoría: Agricultural Engineering. Posición 6 de 12 en 2010.ISSN 1537-5110
Arriaga, F., Íñiguez-González, G. and Esteban, M. (2011)Bonding shear strength in timber and GFRP glued with epoxy adhesivesWood Research, 56(3):2011, 297-310.
Fernandez-Cabo, J.L., Arriaga, F., Majano-Majano, A., Iñiguez-González, G. (2012)Short-term performance of the HSB® shear plate-type connector for timber-concrete composite beams.Construction and Building Materials, 30, 455-462. DOI:10.1016/j.conbuildmat.2011.12.035. Editorial: Elsevier Sci Ltd
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Dissemination of results
- SCI Papers (2010-2014): 18 papers
Arriaga, F., Íñiguez-Gonzalez, G., Esteban, M. and Divos, F. (2012)Vibration method for grading of large cross section timber of Spanish coniferous species.Holzforschung. Vol. 66, pp. 381–387.Editorial: Walter de Gruyter, GmbH & Co.
Bobadilla, I., Íñiguez-Gonzalez, Esteban, M. and Arriaga, F. (2012)Vibration Method for the Prediction of Aging Effect on Properties of Particleboard and Fiberboard.Forest Products Journal. Vol. 62, nº1, pp. 69-74.Editorial: Forest Products Society
Baño, V., Arriaga, F. and Guaita, M. (2013).Determination of the influence of size and position of knots on load capacity and stress distribution in timber beams of Pinus sylvestris using finite element model.Biosystems Engineering (Biosyst. Eng). Vol. 114 pp. 214-222. Factor de impacto: 1,357 (2012). DOI: http://dx.doi.org/10.1016/j.biosystemseng.2012.12.010
Vega, V., Arriaga, F., Guaita, M. and Baño, V. (2013).Proposal for visual grading criteria of structural timber of sweet chestnut from Spain. European Journal of Wood and Wood Products, Vol. 71, nº 4, pp 529-532.DOI: 10.1007/s00107-013-0705-4 ISSN: 0018-3768
11June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Dissemination of results
- SCI Papers (2010-2014): 18 papers
Arriaga, F., Íñiguez-Gonzalez, G., Esteban, M. and Fernandez-Cabo, J.L. (2013).Simplified model for the strength assessment of timber beams joined by bonded plates. Volume 25, Issue 8 (August 2013), 980–990.Journal of Materials in Civil Engineering.http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0000660Editorial: ASCE
Arriaga, F., Montón, J., Segues., E. and Iñiguez-Gonzalez, G. (2014)Determination of the mechanical properties of Radiata pine timber by means of longitudinal and transverse vibration methods. Holzforschung. Vol. 68-3, 299-305. Editorial: Walter de Gruyter, GmbH & Co.
Aira, J.R., Arriaga, F., Íñiguez-González, G., Crespo, J. (2014)Static and kinetic friction coefficients of Scots pine (Pinus sylvestris L.), parallel and perpendicular to grain direction.Materiales de Construcción. Vol. 64, Issue 315, July–September 2014, e030ISSN-L: 0465-2746DOI: http://dx.doi.org/10.3989/mc.2014.03913
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Dissemination of results
- SCI Papers (2010-2014): 18 papers
Aira, J.R., Arriaga, F., Íñiguez-González, G. (2014)Determination of the elastic constants of Scots pine (Pinus sylvestris L.) wood by means of compression tests.Biosystems Engineering (Biosyst. Eng), I26 (2014) I2-22. Factor de impacto: 1,357 (2012). DOI: http://dx.doi.org/10.1016/j.biosystemseng.2014.07.008
Llana, D.F., Íñiguez-González, G., Arriaga, F. and Niemz, P. (2014)Influence of temperature and moisture content on non-destructive measurements in scots pine wood.Wood Research, 59(5):2014, 769-780.
Touza, M.C., Cid, A., Diz, S. 2014. The constructive design of the maritime station of Vilanova de Arousa (Pontevedra), first Spanish project with acetylated timber. The Seventh European Conference on Wood Modification (ECWM7). Laboratorio Nacional de Engenharia Civil (LNEC), Lisbon, Portugal.
12June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Dissemination of results
- Technical Books (2010-2014): 7 books
Arriaga, F., Esteban, M. E Íñiguez, G. (2010).Productos de madera para la construcción. Capítulo 1 de la Guía de Construir con Madera. Documentos de aplicación del CTE.Editorial: Construir con Madera (CcM). (78 págs.)ISBN: 978-84-693-1289-6.
Arriaga, F. Íñiguez, G., Esteban, M., Argüelles Álvarez, R. y Fernández Cabo, J.L. (2011).Diseño y cálculo de uniones en estructuras de madera. Documento de aplicación del CTE.Editorial: MADERIA, Sociedad Española de la Madera. 150 págs.Depósito Legal: M-48979-2011.ISBN: 979-84-695-0984-5.
Argüelles Álvarez, R., Argüelles Bustillo, R., Argüelles Bustillo, J.M., Arriaga, F. y Atienza, J.R. (2013)Estructuras de acero. Fundamentos y cálculo según CTE, EAE y EC3.Editorial Bellisco, Ediciones Técnicas y Científicas (680 págs)ISBN: 978-84-92970-52-03ª edición
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Dissemination of results
- Technical Books (2010-2013): 7 books
Esteban, M., Arriaga, F., Argüelles Álvarez, R., e Íñiguez, G. (2013). Estructuras de madera para cubiertas de viviendas.Documentos de aplicación del CTE.Editorial: Construir con Madera (CcM). (53 págs.)ISBN: 978-84-695-3439-7. Depósito Legal: M-22816-2013
Arriaga, F., Íñiguez, G., Esteban, M., Argüelles Álvarez, R., y Fernández Cabo, J.L. (2013). Uniones en estructuras de madera.Documentos de aplicación del CTE.Editorial: Construir con Madera (CcM). (35 págs.)ISBN: 978-84-695-3438-0. Depósito Legal: M-22817-2013
Argüelles Álvarez, R., Arriaga, F., Esteban, M., Íñiguez, G. y Argüelles Bustillo, R. (2013). Estructuras de madera. Bases de cálculo. Editorial AITIM, Madrid (570 págs.)ISBN: Obra completa: 978-84-87381-43-0, Tomo 1: 978-84-87381-44-7.
Touza, M.C. 2013. Guía de la Madera. Durabilidad. Documento de aplicación del CTE. CONFEMADERA. 96 pp. ISBN: 978-84-695-7044-9.
13June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Doctoral Thesis (last 5 years): 6 + 3 in progress
Caracterización mecánica de la madera estructural de Castanea sativa Mill. Clasificación visual y evaluación mediante métodos no destructivos. Autor: Abel Vega Cueto, Ingeniero de Montes. Directores: Manuel Guaita Fernández y Vanessa Baño Gómez. Fecha de defensa: 13-09-2013. Universidad de Santiago de Compostela, Escuela Politécnica de Lugo, Lugo.
Aplicación de métodos numéricos al análisis de estructuras de madera en situación de incendio. Autor: Rubén José Regueira Gay, Ingeniero de Montes. Director: Manuel Guaita Fernández. Fecha de defensa: 13-09-2013. Universidad de Santiago de Compostela, Escuela Politécnica de Lugo, Lugo.
Experimental and FEM analysis of the stress state of halved and tabled traditionaltimber scarf joint.José Ramón Aira ZunzuneguiSupervisors: Francisco Arriaga Martitegui, Guillermo Íñiguez GonzálezAño: 2013. Universidad Politécnica de Madrid
Grading of structural large cross-section timber of Pinus sylvestris L. by nondestructive methods.María José Montero García-AndradeSupervisor: Miguel Esteban HerreroAño: 2013. Universidad Politécnica de Madrid
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Doctoral Thesis (last 5 years): 6 + 3 in progress
Structural grading of Pinus radiata D. Don timber from Catalonia by means ofnondestructive methods and its application to structural assesment.Montón, J. 2012.Supervisors: Arriaga, F and Avellaneda, J. Universidad Politécnica de Cataluña.
Numerical analysis of strength loss by knots in timber.Baño, V. 2009.Supervisors: Guaita, M. and Arriaga, F. Universidad de Santiago de Compostela.
14June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Dissemination of results
Scientific production:(last 5 years)
• Congress Papers 17
• SCI articles 18
• Books 7
• Doctoral thesis 6
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s
Research?
Thank you!
15June 2015
Timber Construction Research Group - UPM
Timber Construction Research Group
g i . c o n s m a d e r a @ u p m . e s