USER MANUAL (ENG)

BOOSTER CELLT H O R Z O N E

1BOOSTER CELLS:t Persgatan 23, 602 33 Norrköping Swedencontact@thor-zone.com thor-zone.com

THOR ZONE

BC LINK

8X M3x44X M3x18

SCREWS

BOOSTER CELL

WHAT’S IN THE BOX?

2BOOSTER CELLS:t Persgatan 23, 602 33 Norrköping Swedencontact@thor-zone.com thor-zone.com

THOR ZONE

1. Remove the original front cap and the grills

INSTRUCTIONS

SCREWS

• Hex key (size: H2.0)

TOOLS

INSTALL BOOSTER CELL — SHELL (1/2)

3BOOSTER CELLS:t Persgatan 23, 602 33 Norrköping Swedencontact@thor-zone.com thor-zone.com

THOR ZONE

2. Align the Booster Cell to the Shell NOTE: Rotate Booster Cell by 180° if you are using flipped layout

3. Secure both of them to each other using 2x short grills

INSTRUCTIONS

SCREWS

• Hex key (size: H2.0)

TOOLS

INSTALL BOOSTER CELL — SHELL (2/2)

4BOOSTER CELLS:t Persgatan 23, 602 33 Norrköping Swedencontact@thor-zone.com thor-zone.com

THOR ZONE

OU

T

POWER OR RESET SWITCH

PWM FAN HEADER

1. Remove the original storage frames and screws

2. Attach the BC Link to the Core and secure it with two M3x4 screws

3. Connect the BC Link 2-pin connector (Booster Cell front button) NOTE: Configure as either a power button or reset switch

4. Connect the BC Link 4-pin connector to a fan header on your motherboard

• Connect the BC Link 3-pin connector to one of the OUT-ports on your LED strips NOTE: MJOLNIR R ONLY

INSTRUCTIONS

2x M3x4

SCREWS

• Hex key (size: H2.0)

TOOLS

INSTALL BOOSTER CELL — CORE

5MJOLNIRS:t Persgatan 23, 602 33 Norrköping Swedencontact@thor-zone.com thor-zone.com

THOR ZONE

1. Attach a slim 120mm PWM fan to the Booster Cell and secure it using four M3x18 screws

2. Connect 4-pin PWM fan connector to the Booster Cell NOTE: Don’t twist/pull the Booster Cell fan connector or it may tear

INSTRUCTIONS

4x M3x18

SCREWS

• Hex key (size: H2.0)

TOOLS

ADD 120MM FAN