DSL-G604T

©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.Software and specifications subject to change without notice. DSL-G604T.12062004

If any of the above items are missing, please contact your reseller.

CD-ROM with Manual

Before You Begin:

DSL-G604T Wireless ADSL Router

Check Your Package Contents

Wireless ADSL Router

12V AC, 1.2A Power Adapter

Using a power supply with adifferent voltage ratingwill damage thisproduct and void itswarranty.

This product can be setup usingThis product can be setup usingThis product can be setup usingThis product can be setup usingThis product can be setup usingananananany curry curry curry curry currenenenenent Wt Wt Wt Wt Web breb breb breb breb browserowserowserowserowser, i.e, i.e, i.e, i.e, i.e.,.,.,.,.,Internet Explorer 6 or NetscapeInternet Explorer 6 or NetscapeInternet Explorer 6 or NetscapeInternet Explorer 6 or NetscapeInternet Explorer 6 or NetscapeNavigator 6.2.3 or aboveNavigator 6.2.3 or aboveNavigator 6.2.3 or aboveNavigator 6.2.3 or aboveNavigator 6.2.3 or above

Please read and make sure you understand all the prerequisites for proper installation ofyour new ADSL Router. Have all the necessary information and equipment on handbefore beginning the installation.

Ethernet Cable

Telephone Cord

802.11g Antenna

2

Hardware Overview

Front Panel

Power LED: Solid lightindicates a connection toa good power connector.

Status LED: A blinkinglight indicates normaloperation. If this light is notlit and the power light is on,this indicates failure.ADSL LED: Lights solid

when sychronized withthe ADSL connection.

WLAN LED: This LED blinksto indicate wireless activity.

LAN Ports: A solid lightindicates a connectionon the associated port. Ablinking light indicatesactivity on the associatedport.

3

Reset Button: Resets the DSL-G604Tto the factory default settings. Hold forseven seconds for the unit to factoryreset.

Power Receptor: The ACPower Adapter connects here.

LAN Ports: Your computersconnect here using standardEthernet cables.

ADSL Port: Connects toyour telephone jack using astandard telephone cord.

Rear Panel

Hardware Overview (continued)

Wireless Antenna:Used for wirelesscommunication.

4

Hardware Installation

Step a

Step a

Step b

Step c

5

Hardware Installation (continued)

Connect the telephone cord from your phonejack to the ADSL port on the DSL-G604T.

Connect an Ethernet cable from your computerto a LAN port on the DSL-G604T.

Connect the power adapter to the powerconnector on the DSL-G604T and the otherend to a known good power source.

Step a

Step b

Step c

6

Admin is the default User Nameand Password. Type admin intothe User name and Passwordfields.

Click OK

Type http://192.168.1.1 into theURL address box and press theEnter or Return key.

Using the Setup Wizard

Click Run Wizard

Launch your Web browser(a shortcut is typically foundon your desktop).

Step a

Step b

Step c

Step d

7

Using the Setup Wizard (continued)

Click Next

This screen allows you to entera new password for the adminaccount. This password is usedto log into the web-basedmanagement interface.

Select your Time Zone

Click Next

Click Next

Step e

Step f

Step g

8

You will need to select the Internet Connection Type. If you are unsure which type ofInternet Connection you have, please contact your Internet Service Provider. There are fourconnection modes and settings vary depending on the connection type.

1. Dynamic IP Address - see Dynamic IP Address on page 8.

2. Static IP Address - see Static IP Address on page 9.

3. PPPoE/PPPoA - see PPPoE/PPPoA on page 9.

4. Bridge Mode - see Bridge Mode on page 10.

A checklist of necessary settings is provided in the Appendix. Contact your Internet ServiceProvider to obtain the necessary details.

Using the Setup Wizard (continued)

Click Next

Click Next

Click Clone MAC Address

Dynamic IP Address

Select your Connection Typeand proceed to step h1, h2, h3,or h4 depending upon yourconnection type.

The DSL-G604T defaults to themost commonly used values in theUnited States.

Note: If the MAC address does notappear, please refer to the UserManual on the CD-ROM.

2c

Step h

Step h1

Step h1

Step h2

Step h3

Step h4

9

Using the Setup Wizard (continued)

Static IP Address

Click Next

PPPoE/PPPoA

Click Next

The DSL-G604T defaults to the mostcommonly used values in the UnitedStates. The IP address information onthe right is only shown as an exampleof the format that you will use.

The DSL-G604T defaults to the mostcommonly used values in the UnitedStates. Only modify these settings ifyou are sure they need to be changed.The User Name and Password willbe unique to your Internet account.

If you forget your account information,please contact your Internet ServiceProvider.

Step h2

Step h3

10

Click Restart

Configuration is complete! Type ina URL such as www.dlink.comto test your connection.

Bridge Mode

Click Next

Using the Setup Wizard (continued)

Step h4

Step i

Step j

11

Step H4 - Bridged Mode

VPI:_____

VCI:_____

Connection Type:

� 1483 Bridged IP LLC

� 1483 Bridged IP VC-Mux

Step H1 - Dynamic IP Address

VPI:_____

VCI:_____

Connection Type:

� 1483 Bridged IP LLC

� 1483 Bridged IP VC-Mux

Step H2 - Static IP Address

VPI:_____

VCI:_____

IP Address: ____.____.____.____

Subnet Mask: ____.____.____.____

ISP Gateway Address: ____.____.____.____

Primary DNS: ____.____.____.____

Secondary DNS: ____.____.____.____

Connection Type:

� 1483 Bridged IP LLC

� 1483 Bridged IP VC-Mux

� 1483 Routed IP LLC

� 1483 Routed IP VC-Mux

� IPoA

Step H3 - PPPoE/PPPoA

User Name: _____________________

Password: _____________________

VPI:_____

VCI:_____

Connection Type:

� PPPoE LLC

� PPPoA LLC

� PPPoA VC-Mux

Appendix - Settings Checklist

Your ISP has provided you one of the four methods listed on the right for connecting to theInternet. You may need to contact them to find out which method you are using and fill inthe appropriate details.

TTTTTechniechniechniechniechnical Supportcal Supportcal Supportcal Supportcal SupportYou can find software updates and user documentation on the D-Link website.

D-Link provides free technical support for customers within the United States andwithin Canada for the duration of the warranty period on this product.

U.S. and Canadian customers can contact D-Link technical support through ourwebsite, or by phone.

Tech Support for customers within the United States:D-Link Technical Support over the Telephone:(877) 453-546524 hours a day, seven days a week

D-Link Technical Support over the Internet:http://support.dlink.comemail:support@dlink.com

Tech Support for customers within Canada:D-Link Technical Support over the Telephone:(800) 361-5265Monday to Friday 7:30am to 12:00am EST

D-Link Technical Support over the Internet:http://support.dlink.caemail:support@dlink.ca