· this allows qb to do the controlling of the tuning voltage by the use of r35, r36, and r37. at...

53

Upload: others

Post on 26-Mar-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 2:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 3:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 4:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 5:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 6:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 7:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 8:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 9:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 10:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 11:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 12:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 13:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 14:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 15:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 16:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 17:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 18:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 19:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 20:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 21:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 22:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 23:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 24:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 25:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 26:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 27:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 28:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 29:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 30:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 31:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 32:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 33:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 34:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 35:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 36:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 37:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 38:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 39:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 40:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 41:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 42:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 43:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 44:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 45:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 46:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 47:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 48:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 49:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 50:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 51:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 52:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but
Page 53:  · This allows QB to do the controlling of the tuning Voltage by the use Of R35, R36, and R37. At 118MHz, low end Of the A band, the tuning voltage IS too low to turn on QB, but